diff options
author | Paul Burton <paul.burton@imgtec.com> | 2016-08-26 15:17:37 +0100 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2016-10-05 01:31:20 +0200 |
commit | a34e93882de4e50e349d2d23b20dde5257d42f94 (patch) | |
tree | 141e1130a3f305334520a21e5234a41ea4f6c3c8 /arch | |
parent | 53f37d1d306927d21e0256fe6c48fa517d889cf7 (diff) | |
download | linux-a34e93882de4e50e349d2d23b20dde5257d42f94.tar.bz2 |
MIPS: SEAD3: Probe ethernet controller using DT
Probe the smsc911x ethernet controller using device tree rather than
platform code, reducing the amount of the latter.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14050/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/mips/boot/dts/mti/sead3.dts | 12 | ||||
-rw-r--r-- | arch/mips/include/asm/mips-boards/sead3int.h | 2 | ||||
-rw-r--r-- | arch/mips/mti-sead3/sead3-dtshim.c | 15 | ||||
-rw-r--r-- | arch/mips/mti-sead3/sead3-platform.c | 33 |
4 files changed, 26 insertions, 36 deletions
diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts index 3f681c530082..29ed194fc762 100644 --- a/arch/mips/boot/dts/mti/sead3.dts +++ b/arch/mips/boot/dts/mti/sead3.dts @@ -87,4 +87,16 @@ no-loopback-test; }; + + eth@1f010000 { + compatible = "smsc,lan9115"; + reg = <0x1f010000 0x10000>; + reg-io-width = <4>; + + interrupts = <0>; /* GIC 0 or CPU 6 */ + + phy-mode = "mii"; + smsc,irq-push-pull; + smsc,save-mac-address; + }; }; diff --git a/arch/mips/include/asm/mips-boards/sead3int.h b/arch/mips/include/asm/mips-boards/sead3int.h index 3a5e079fda76..7fdb9d4598bf 100644 --- a/arch/mips/include/asm/mips-boards/sead3int.h +++ b/arch/mips/include/asm/mips-boards/sead3int.h @@ -14,10 +14,8 @@ /* CPU interrupt offsets */ #define CPU_INT_EHCI 2 -#define CPU_INT_NET 6 /* GIC interrupt offsets */ -#define GIC_INT_NET GIC_SHARED_TO_HWIRQ(0) #define GIC_INT_EHCI GIC_SHARED_TO_HWIRQ(5) #endif /* !(_MIPS_SEAD3INT_H) */ diff --git a/arch/mips/mti-sead3/sead3-dtshim.c b/arch/mips/mti-sead3/sead3-dtshim.c index b462f65b8ce0..279d8d464693 100644 --- a/arch/mips/mti-sead3/sead3-dtshim.c +++ b/arch/mips/mti-sead3/sead3-dtshim.c @@ -25,7 +25,8 @@ static unsigned char fdt_buf[16 << 10] __initdata; static int remove_gic(void *fdt) { const unsigned int cpu_uart_int = 4; - int gic_off, cpu_off, uart_off, err; + const unsigned int cpu_eth_int = 6; + int gic_off, cpu_off, uart_off, eth_off, err; uint32_t cfg, cpu_phandle; /* leave the GIC node intact if a GIC is present */ @@ -82,6 +83,18 @@ static int remove_gic(void *fdt) return uart_off; } + eth_off = fdt_node_offset_by_compatible(fdt, -1, "smsc,lan9115"); + if (eth_off < 0) { + pr_err("unable to find ethernet DT node: %d\n", eth_off); + return eth_off; + } + + err = fdt_setprop_u32(fdt, eth_off, "interrupts", cpu_eth_int); + if (err) { + pr_err("unable to set ethernet interrupts property: %d\n", err); + return err; + } + return 0; } diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c index 538a6f8f0917..9f9e91471f17 100644 --- a/arch/mips/mti-sead3/sead3-platform.c +++ b/arch/mips/mti-sead3/sead3-platform.c @@ -14,37 +14,9 @@ #include <linux/mtd/physmap.h> #include <linux/of.h> #include <linux/platform_device.h> -#include <linux/smsc911x.h> #include <asm/mips-boards/sead3int.h> -static struct smsc911x_platform_config sead3_smsc911x_data = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource sead3_net_resources[] = { - { - .start = 0x1f010000, - .end = 0x1f01ffff, - .flags = IORESOURCE_MEM - }, { - .flags = IORESOURCE_IRQ - } -}; - -static struct platform_device sead3_net_device = { - .name = "smsc911x", - .id = 0, - .dev = { - .platform_data = &sead3_smsc911x_data, - }, - .num_resources = ARRAY_SIZE(sead3_net_resources), - .resource = sead3_net_resources -}; - static struct mtd_partition sead3_mtd_partitions[] = { { .name = "User FS", @@ -175,7 +147,6 @@ static struct platform_device *sead3_platform_devices[] __initdata = { &fled_device, &sead3_led_device, &ehci_device, - &sead3_net_device, }; static int __init sead3_platforms_device_init(void) @@ -204,13 +175,9 @@ static int __init sead3_platforms_device_init(void) if (gic_present) { ehci_resources[1].start = irq_create_mapping(irqd, GIC_INT_EHCI); - sead3_net_resources[1].start = - irq_create_mapping(irqd, GIC_INT_NET); } else { ehci_resources[1].start = irq_create_mapping(irqd, CPU_INT_EHCI); - sead3_net_resources[1].start = - irq_create_mapping(irqd, CPU_INT_NET); } return platform_add_devices(sead3_platform_devices, |