summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-08-01 18:36:01 -0400
committerLinus Torvalds <torvalds@linux-foundation.org>2016-08-01 18:36:01 -0400
commit43a0a98aa8da71583f84b84fd72e265c24d4c5f8 (patch)
tree3830aff2b36f48a67be5f485f00f56cf4269729d /arch
parent6911a5281430cf6897376487698504620f454791 (diff)
parentf8c6d88b2c874295f49b9ad1ca0826b9a8ef3180 (diff)
downloadlinux-43a0a98aa8da71583f84b84fd72e265c24d4c5f8.tar.bz2
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi29
-rw-r--r--arch/arm/boot/dts/exynos4210-origen.dts4
-rw-r--r--arch/arm/boot/dts/exynos4210-smdkv310.dts4
-rw-r--r--arch/arm/boot/dts/exynos4412-odroid-common.dtsi6
-rw-r--r--arch/arm/boot/dts/exynos4412-origen.dts4
-rw-r--r--arch/arm/boot/dts/exynos4412-smdk4412.dts4
-rw-r--r--arch/arm/boot/dts/exynos5250-arndale.dts4
-rw-r--r--arch/arm/boot/dts/exynos5250-smdk5250.dts4
-rw-r--r--arch/arm/boot/dts/exynos5250-spring.dts4
-rw-r--r--arch/arm/boot/dts/exynos5420-arndale-octa.dts4
-rw-r--r--arch/arm/boot/dts/exynos5420-peach-pit.dts4
-rw-r--r--arch/arm/boot/dts/exynos5420-smdk5420.dts4
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos5800-peach-pi.dts4
-rw-r--r--arch/arm/mach-exynos/Kconfig1
-rw-r--r--arch/arm/mach-exynos/Makefile3
-rw-r--r--arch/arm/mach-exynos/exynos.c19
-rw-r--r--arch/arm/mach-exynos/mfc.h16
-rw-r--r--arch/arm/mach-exynos/pm_domains.c223
-rw-r--r--arch/arm/mach-exynos/s5p-dev-mfc.c93
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c5
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c10
-rw-r--r--arch/arm/mach-ux500/Makefile6
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.c1065
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.h24
-rw-r--r--arch/arm/mach-ux500/cache-l2x0.c67
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c139
-rw-r--r--arch/arm/mach-ux500/cpu.c148
-rw-r--r--arch/arm/mach-ux500/id.c116
-rw-r--r--arch/arm/mach-ux500/id.h144
-rw-r--r--arch/arm/mach-ux500/platsmp.c1
-rw-r--r--arch/arm/mach-ux500/setup.h12
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi6220.dtsi2
33 files changed, 153 insertions, 2024 deletions
diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
new file mode 100644
index 000000000000..c4d063ae6b74
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
@@ -0,0 +1,29 @@
+/*
+ * Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition.
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mfc_left: region@51000000 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0x51000000 0x800000>;
+ };
+
+ mfc_right: region@43000000 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0x43000000 0x800000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index ad7394c1d67a..f5e4eb23aa21 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -18,6 +18,7 @@
#include "exynos4210.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Origen evaluation board based on Exynos4210";
@@ -288,8 +289,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 94ca7d36ab37..de917f0d907d 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -17,6 +17,7 @@
/dts-v1/;
#include "exynos4210.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Samsung smdkv310 evaluation board based on Exynos4210";
@@ -133,8 +134,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index ec7619a384a2..276ac9a7bb82 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -13,6 +13,7 @@
#include "exynos4412.dtsi"
#include "exynos4412-ppmu-common.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
chosen {
@@ -499,6 +500,11 @@
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
};
+&mfc {
+ memory-region = <&mfc_left>, <&mfc_right>;
+ status = "okay";
+};
+
&mixer {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 8bca699b7f20..cd363d7e4e34 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -16,6 +16,7 @@
#include "exynos4412.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Origen evaluation board based on Exynos4412";
@@ -466,8 +467,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index a51069f3c03b..9b6d561dbdac 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "exynos4412.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Samsung SMDK evaluation board based on Exynos4412";
@@ -112,8 +113,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 85dad29c08dc..39940f4bd556 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -14,6 +14,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -516,8 +517,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index b7992b13c9de..9fac874af5eb 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -13,6 +13,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
@@ -344,8 +345,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index ac291f540812..784130bdb6a3 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -14,6 +14,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Google Spring";
@@ -425,8 +426,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 60bc861d0f9d..b8b5f3ae2942 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -16,6 +16,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
@@ -347,8 +348,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 1de972d46a87..6b6766e3d90a 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -16,6 +16,7 @@
#include <dt-bindings/regulator/maxim,max77802.h>
#include "exynos5420.dtsi"
#include "exynos5420-cpus.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Google Peach Pit Rev 6+";
@@ -702,8 +703,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 2e748d19322f..5206f41e548d 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -13,6 +13,7 @@
#include "exynos5420.dtsi"
#include "exynos5420-cpus.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Samsung SMDK5420 board based on EXYNOS5420";
@@ -355,8 +356,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 2a4e10bc8801..7c2335f18bfc 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -17,6 +17,7 @@
#include "exynos5800.dtsi"
#include "exynos5422-cpus.dtsi"
#include "exynos5422-cpu-thermal.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
memory {
@@ -406,8 +407,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 62ceb89e073f..1f735963ca98 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -16,6 +16,7 @@
#include <dt-bindings/regulator/maxim,max77802.h>
#include "exynos5800.dtsi"
#include "exynos5420-cpus.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Google Peach Pi Rev 10+";
@@ -670,8 +671,7 @@
};
&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
&mmc_0 {
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index ecf139f31c4c..8f820de890b4 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -18,6 +18,7 @@ menuconfig ARCH_EXYNOS
select EXYNOS_THERMAL
select EXYNOS_PMU
select EXYNOS_SROM
+ select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
select GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 34d29df3e006..9ea6c54645ad 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o
obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
obj-$(CONFIG_PM_SLEEP) += suspend.o
-obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
@@ -23,5 +22,3 @@ AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec)
obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o
CFLAGS_mcpm-exynos.o += -march=armv7-a
-
-obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index ecbfa5dd3c54..acabf0bffc5d 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -27,7 +27,6 @@
#include <plat/cpu.h>
#include "common.h"
-#include "mfc.h"
static struct map_desc exynos4_iodesc[] __initdata = {
{
@@ -235,23 +234,6 @@ static char const *const exynos_dt_compat[] __initconst = {
NULL
};
-static void __init exynos_reserve(void)
-{
-#ifdef CONFIG_S5P_DEV_MFC
- int i;
- char *mfc_mem[] = {
- "samsung,mfc-v5",
- "samsung,mfc-v6",
- "samsung,mfc-v7",
- "samsung,mfc-v8",
- };
-
- for (i = 0; i < ARRAY_SIZE(mfc_mem); i++)
- if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i]))
- break;
-#endif
-}
-
static void __init exynos_dt_fixup(void)
{
/*
@@ -273,6 +255,5 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
.init_machine = exynos_dt_machine_init,
.init_late = exynos_init_late,
.dt_compat = exynos_dt_compat,
- .reserve = exynos_reserve,
.dt_fixup = exynos_dt_fixup,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mfc.h b/arch/arm/mach-exynos/mfc.h
deleted file mode 100644
index dec93cd5b3c6..000000000000
--- a/arch/arm/mach-exynos/mfc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2013 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_MFC_H
-#define __MACH_EXYNOS_MFC_H __FILE__
-
-int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
- int depth, void *data);
-
-#endif /* __MACH_EXYNOS_MFC_H */
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
deleted file mode 100644
index 0e075d96ccd4..000000000000
--- a/arch/arm/mach-exynos/pm_domains.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Exynos Generic power domain support.
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Implementation of Exynos specific power domain control which is used in
- * conjunction with runtime-pm. Support for both device-tree and non-device-tree
- * based power domain support is included.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/pm_domain.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/sched.h>
-
-#define INT_LOCAL_PWR_EN 0x7
-#define MAX_CLK_PER_DOMAIN 4
-
-/*
- * Exynos specific wrapper around the generic power domain
- */
-struct exynos_pm_domain {
- void __iomem *base;
- char const *name;
- bool is_off;
- struct generic_pm_domain pd;
- struct clk *oscclk;
- struct clk *clk[MAX_CLK_PER_DOMAIN];
- struct clk *pclk[MAX_CLK_PER_DOMAIN];
- struct clk *asb_clk[MAX_CLK_PER_DOMAIN];
-};
-
-static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
-{
- struct exynos_pm_domain *pd;
- void __iomem *base;
- u32 timeout, pwr;
- char *op;
- int i;
-
- pd = container_of(domain, struct exynos_pm_domain, pd);
- base = pd->base;
-
- for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
- if (IS_ERR(pd->asb_clk[i]))
- break;
- clk_prepare_enable(pd->asb_clk[i]);
- }
-
- /* Set oscclk before powering off a domain*/
- if (!power_on) {
- for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
- if (IS_ERR(pd->clk[i]))
- break;
- pd->pclk[i] = clk_get_parent(pd->clk[i]);
- if (clk_set_parent(pd->clk[i], pd->oscclk))
- pr_err("%s: error setting oscclk as parent to clock %d\n",
- pd->name, i);
- }
- }
-
- pwr = power_on ? INT_LOCAL_PWR_EN : 0;
- writel_relaxed(pwr, base);
-
- /* Wait max 1ms */
- timeout = 10;
-
- while ((readl_relaxed(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) {
- if (!timeout) {
- op = (power_on) ? "enable" : "disable";
- pr_err("Power domain %s %s failed\n", domain->name, op);
- return -ETIMEDOUT;
- }
- timeout--;
- cpu_relax();
- usleep_range(80, 100);
- }
-
- /* Restore clocks after powering on a domain*/
- if (power_on) {
- for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
- if (IS_ERR(pd->clk[i]))
- break;
-
- if (IS_ERR(pd->pclk[i]))
- continue; /* Skip on first power up */
- if (clk_set_parent(pd->clk[i], pd->pclk[i]))
- pr_err("%s: error setting parent to clock%d\n",
- pd->name, i);
- }
- }
-
- for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
- if (IS_ERR(pd->asb_clk[i]))
- break;
- clk_disable_unprepare(pd->asb_clk[i]);
- }
-
- return 0;
-}
-
-static int exynos_pd_power_on(struct generic_pm_domain *domain)
-{
- return exynos_pd_power(domain, true);
-}
-
-static int exynos_pd_power_off(struct generic_pm_domain *domain)
-{
- return exynos_pd_power(domain, false);
-}
-
-static __init int exynos4_pm_init_power_domain(void)
-{
- struct device_node *np;
-
- for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
- struct exynos_pm_domain *pd;
- int on, i;
-
- pd = kzalloc(sizeof(*pd), GFP_KERNEL);
- if (!pd) {
- pr_err("%s: failed to allocate memory for domain\n",
- __func__);
- of_node_put(np);
- return -ENOMEM;
- }
- pd->pd.name = kstrdup_const(strrchr(np->full_name, '/') + 1,
- GFP_KERNEL);
- if (!pd->pd.name) {
- kfree(pd);
- of_node_put(np);
- return -ENOMEM;
- }
-
- pd->name = pd->pd.name;
- pd->base = of_iomap(np, 0);
- if (!pd->base) {
- pr_warn("%s: failed to map memory\n", __func__);
- kfree_const(pd->pd.name);
- kfree(pd);
- continue;
- }
-
- pd->pd.power_off = exynos_pd_power_off;
- pd->pd.power_on = exynos_pd_power_on;
-
- for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
- char clk_name[8];
-
- snprintf(clk_name, sizeof(clk_name), "asb%d", i);
- pd->asb_clk[i] = of_clk_get_by_name(np, clk_name);
- if (IS_ERR(pd->asb_clk[i]))
- break;
- }
-
- pd->oscclk = of_clk_get_by_name(np, "oscclk");
- if (IS_ERR(pd->oscclk))
- goto no_clk;
-
- for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
- char clk_name[8];
-
- snprintf(clk_name, sizeof(clk_name), "clk%d", i);
- pd->clk[i] = of_clk_get_by_name(np, clk_name);
- if (IS_ERR(pd->clk[i]))
- break;
- /*
- * Skip setting parent on first power up.
- * The parent at this time may not be useful at all.
- */
- pd->pclk[i] = ERR_PTR(-EINVAL);
- }
-
- if (IS_ERR(pd->clk[0]))
- clk_put(pd->oscclk);
-
-no_clk:
- on = readl_relaxed(pd->base + 0x4) & INT_LOCAL_PWR_EN;
-
- pm_genpd_init(&pd->pd, NULL, !on);
- of_genpd_add_provider_simple(np, &pd->pd);
- }
-
- /* Assign the child power domains to their parents */
- for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
- struct generic_pm_domain *child_domain, *parent_domain;
- struct of_phandle_args args;
-
- args.np = np;
- args.args_count = 0;
- child_domain = of_genpd_get_from_provider(&args);
- if (IS_ERR(child_domain))
- continue;
-
- if (of_parse_phandle_with_args(np, "power-domains",
- "#power-domain-cells", 0, &args) != 0)
- continue;
-
- parent_domain = of_genpd_get_from_provider(&args);
- if (IS_ERR(parent_domain))
- continue;
-
- if (pm_genpd_add_subdomain(parent_domain, child_domain))
- pr_warn("%s failed to add subdomain: %s\n",
- parent_domain->name, child_domain->name);
- else
- pr_info("%s has as child subdomain: %s.\n",
- parent_domain->name, child_domain->name);
- }
-
- return 0;
-}
-core_initcall(exynos4_pm_init_power_domain);
diff --git a/arch/arm/mach-exynos/s5p-dev-mfc.c b/arch/arm/mach-exynos/s5p-dev-mfc.c
deleted file mode 100644
index 8ef1f3ee4e98..000000000000
--- a/arch/arm/mach-exynos/s5p-dev-mfc.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
- *
- * Base S5P MFC resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/memblock.h>
-#include <linux/ioport.h>
-#include <linux/of_fdt.h>
-#include <linux/of.h>
-
-static struct platform_device s5p_device_mfc_l;
-static struct platform_device s5p_device_mfc_r;
-
-struct s5p_mfc_dt_meminfo {
- unsigned long loff;
- unsigned long lsize;
- unsigned long roff;
- unsigned long rsize;
- char *compatible;
-};
-
-struct s5p_mfc_reserved_mem {
- phys_addr_t base;
- unsigned long size;
- struct device *dev;
-};
-
-static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
-
-
-static void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
- phys_addr_t lbase, unsigned int lsize)
-{
- int i;
-
- s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
- s5p_mfc_mem[0].base = rbase;
- s5p_mfc_mem[0].size = rsize;
-
- s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
- s5p_mfc_mem[1].base = lbase;
- s5p_mfc_mem[1].size = lsize;
-
- for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
- struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
- if (memblock_remove(area->base, area->size)) {
- printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
- area->size, (unsigned long) area->base);
- area->base = 0;
- }
- }
-}
-
-int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
- int depth, void *data)
-{
- const __be32 *prop;
- int len;
- struct s5p_mfc_dt_meminfo mfc_mem;
-
- if (!data)
- return 0;
-
- if (!of_flat_dt_is_compatible(node, data))
- return 0;
-
- prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len);
- if (!prop || (len != 2 * sizeof(unsigned long)))
- return 0;
-
- mfc_mem.loff = be32_to_cpu(prop[0]);
- mfc_mem.lsize = be32_to_cpu(prop[1]);
-
- prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len);
- if (!prop || (len != 2 * sizeof(unsigned long)))
- return 0;
-
- mfc_mem.roff = be32_to_cpu(prop[0]);
- mfc_mem.rsize = be32_to_cpu(prop[1]);
-
- s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize,
- mfc_mem.loff, mfc_mem.lsize);
-
- return 1;
-}
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9a7073949d1d..a5ab712c1a59 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1242,11 +1242,6 @@ static struct pwm_omap_dmtimer_pdata __maybe_unused pwm_dmtimer_pdata = {
#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
static struct lirc_rx51_platform_data rx51_lirc_data = {
.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
- .pwm_timer = 9, /* Use GPT 9 for CIR */
-#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
- .dmtimer = &pwm_dmtimer_pdata,
-#endif
-
};
static struct platform_device rx51_lirc_device = {
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index ab2b2b2b90e5..05e20aaf68dd 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -274,8 +274,6 @@ static struct platform_device omap3_rom_rng_device = {
},
};
-static struct platform_device rx51_lirc_device;
-
static void __init nokia_n900_legacy_init(void)
{
hsmmc2_internal_input_clk();
@@ -294,10 +292,7 @@ static void __init nokia_n900_legacy_init(void)
pr_info("RX-51: Registering OMAP3 HWRNG device\n");
platform_device_register(&omap3_rom_rng_device);
-
}
-
- platform_device_register(&rx51_lirc_device);
}
static void __init omap3_tao3530_legacy_init(void)
@@ -492,10 +487,6 @@ static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
static struct lirc_rx51_platform_data __maybe_unused rx51_lirc_data = {
.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
- .pwm_timer = 9, /* Use GPT 9 for CIR */
-#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
- .dmtimer = &pwm_dmtimer_pdata,
-#endif
};
static struct platform_device __maybe_unused rx51_lirc_device = {
@@ -543,6 +534,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
&omap3_iommu_pdata),
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]),
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]),
+ OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data),
/* Only on am3517 */
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index edfff1ae1f8d..56d0eb6e254e 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,11 +2,9 @@
# Makefile for the linux kernel, U8500 machine.
#
-obj-y := cpu.o id.o pm.o
-obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+obj-y := pm.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o
-obj-$(CONFIG_MACH_MOP500) += board-mop500-regulators.o \
- board-mop500-audio.o
+obj-$(CONFIG_MACH_MOP500) += board-mop500-audio.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
deleted file mode 100644
index 32d744e91ec2..000000000000
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ /dev/null
@@ -1,1065 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Authors: Sundar Iyer <sundar.iyer@stericsson.com>
- * Bengt Jonsson <bengt.g.jonsson@stericsson.com>
- * Daniel Willerud <daniel.willerud@stericsson.com>
- *
- * MOP500 board specific initialization for regulators
- */
-#include <linux/kernel.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/ab8500.h>
-#include "board-mop500-regulators.h"
-#include "id.h"
-
-static struct regulator_consumer_supply gpio_en_3v3_consumers[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-struct regulator_init_data gpio_en_3v3_regulator = {
- .constraints = {
- .name = "EN-3V3",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers),
- .consumer_supplies = gpio_en_3v3_consumers,
-};
-
-/*
- * TPS61052 regulator
- */
-static struct regulator_consumer_supply tps61052_vaudio_consumers[] = {
- /*
- * Boost converter supply to raise voltage on audio speaker, this
- * is actually connected to three pins, VInVhfL (left amplifier)
- * VInVhfR (right amplifier) and VIntDClassInt - all three must
- * be connected to the same voltage.
- */
- REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"),
-};
-
-struct regulator_init_data tps61052_regulator = {
- .constraints = {
- .name = "vaudio-hf",
- .min_uV = 4500000,
- .max_uV = 4500000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers),
- .consumer_supplies = tps61052_vaudio_consumers,
-};
-
-static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
- /* Main display, u8500 R3 uib */
- REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"),
- /* Main display, u8500 uib and ST uib */
- REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"),
- /* Secondary display, ST uib */
- REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"),
- /* SFH7741 proximity sensor */
- REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
- /* BH1780GLS ambient light sensor */
- REGULATOR_SUPPLY("vcc", "2-0029"),
- /* lsm303dlh accelerometer */
- REGULATOR_SUPPLY("vdd", "2-0018"),
- /* lsm303dlhc accelerometer */
- REGULATOR_SUPPLY("vdd", "2-0019"),
- /* lsm303dlh magnetometer */
- REGULATOR_SUPPLY("vdd", "2-001e"),
- /* Rohm BU21013 Touchscreen devices */
- REGULATOR_SUPPLY("avdd", "3-005c"),
- REGULATOR_SUPPLY("avdd", "3-005d"),
- /* Synaptics RMI4 Touchscreen device */
- REGULATOR_SUPPLY("vdd", "3-004b"),
- /* L3G4200D Gyroscope device */
- REGULATOR_SUPPLY("vdd", "2-0068"),
- /* Ambient light sensor device */
- REGULATOR_SUPPLY("vdd", "3-0029"),
- /* Pressure sensor device */
- REGULATOR_SUPPLY("vdd", "2-005c"),
- /* Cypress TrueTouch Touchscreen device */
- REGULATOR_SUPPLY("vcpin", "spi8.0"),
- /* Camera device */
- REGULATOR_SUPPLY("vaux12v5", "mmio_camera"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
- /* On-board eMMC power */
- REGULATOR_SUPPLY("vmmc", "sdi4"),
- /* AB8500 audio codec */
- REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
- /* AB8500 accessory detect 1 */
- REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"),
- /* AB8500 Tv-out device */
- REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"),
- /* AV8100 HDMI device */
- REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
- REGULATOR_SUPPLY("v-SD-STM", "stm"),
- /* External MMC slot power */
- REGULATOR_SUPPLY("vmmc", "sdi0"),
-};
-
-static struct regulator_consumer_supply ab8505_vaux4_consumers[] = {
-};
-
-static struct regulator_consumer_supply ab8505_vaux5_consumers[] = {
-};
-
-static struct regulator_consumer_supply ab8505_vaux6_consumers[] = {
-};
-
-static struct regulator_consumer_supply ab8505_vaux8_consumers[] = {
- /* AB8500 audio codec device */
- REGULATOR_SUPPLY("v-aux8", NULL),
-};
-
-static struct regulator_consumer_supply ab8505_vadc_consumers[] = {
- /* Internal general-purpose ADC */
- REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
- /* ADC for charger */
- REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
- /* TV-out DENC supply */
- REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
- /* Internal general-purpose ADC */
- REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
- /* ADC for charger */
- REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
- /* AB8500 Tv-out device */
- REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"),
-};
-
-static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
- /* AB8500 audio-codec main supply */
- REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
- /* AB8500 audio-codec Mic1 supply */
- REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
- /* AB8500 audio-codec Mic2 supply */
- REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
- /* AB8500 audio-codec DMic supply */
- REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
- /* SoC core supply, no device */
- REGULATOR_SUPPLY("v-intcore", NULL),
- /* USB Transceiver */
- REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
- /* Handled by abx500 clk driver */
- REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"),
-};
-
-static struct regulator_consumer_supply ab8505_usb_consumers[] = {
- /* HS USB OTG physical interface */
- REGULATOR_SUPPLY("v-ape", NULL),
-};
-
-static struct regulator_consumer_supply ab8500_vana_consumers[] = {
- /* DB8500 DSI */
- REGULATOR_SUPPLY("vdddsi1v2", "mcde"),
- REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"),
- REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"),
- REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"),
- REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"),
- REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"),
- /* DB8500 CSI */
- REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"),
-};
-
-/* ab8500 regulator register initialization */
-static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
- /*
- * VanaRequestCtrl = HP/LP depending on VxRequest
- * VextSupply1RequestCtrl = HP/LP depending on VxRequest
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00),
- /*
- * VextSupply2RequestCtrl = HP/LP depending on VxRequest
- * VextSupply3RequestCtrl = HP/LP depending on VxRequest
- * Vaux1RequestCtrl = HP/LP depending on VxRequest
- * Vaux2RequestCtrl = HP/LP depending on VxRequest
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00),
- /*
- * Vaux3RequestCtrl = HP/LP depending on VxRequest
- * SwHPReq = Control through SWValid disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00),
- /*
- * VanaSysClkReq1HPValid = disabled
- * Vaux1SysClkReq1HPValid = disabled
- * Vaux2SysClkReq1HPValid = disabled
- * Vaux3SysClkReq1HPValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
- /*
- * VextSupply1SysClkReq1HPValid = disabled
- * VextSupply2SysClkReq1HPValid = disabled
- * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
- /*
- * VanaHwHPReq1Valid = disabled
- * Vaux1HwHPreq1Valid = disabled
- * Vaux2HwHPReq1Valid = disabled
- * Vaux3HwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00),
- /*
- * VextSupply1HwHPReq1Valid = disabled
- * VextSupply2HwHPReq1Valid = disabled
- * VextSupply3HwHPReq1Valid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00),
- /*
- * VanaHwHPReq2Valid = disabled
- * Vaux1HwHPReq2Valid = disabled
- * Vaux2HwHPReq2Valid = disabled
- * Vaux3HwHPReq2Valid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00),
- /*
- * VextSupply1HwHPReq2Valid = disabled
- * VextSupply2HwHPReq2Valid = disabled
- * VextSupply3HwHPReq2Valid = HWReq2 controlled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04),
- /*
- * VanaSwHPReqValid = disabled
- * Vaux1SwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00),
- /*
- * Vaux2SwHPReqValid = disabled
- * Vaux3SwHPReqValid = disabled
- * VextSupply1SwHPReqValid = disabled
- * VextSupply2SwHPReqValid = disabled
- * VextSupply3SwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00),
- /*
- * SysClkReq2Valid1 = SysClkReq2 controlled
- * SysClkReq3Valid1 = disabled
- * SysClkReq4Valid1 = SysClkReq4 controlled
- * SysClkReq5Valid1 = disabled
- * SysClkReq6Valid1 = SysClkReq6 controlled
- * SysClkReq7Valid1 = disabled
- * SysClkReq8Valid1 = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a),
- /*
- * SysClkReq2Valid2 = disabled
- * SysClkReq3Valid2 = disabled
- * SysClkReq4Valid2 = disabled
- * SysClkReq5Valid2 = disabled
- * SysClkReq6Valid2 = SysClkReq6 controlled
- * SysClkReq7Valid2 = disabled
- * SysClkReq8Valid2 = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20),
- /*
- * VTVoutEna = disabled
- * Vintcore12Ena = disabled
- * Vintcore12Sel = 1.25 V
- * Vintcore12LP = inactive (HP)
- * VTVoutLP = inactive (HP)
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10),
- /*
- * VaudioEna = disabled
- * VdmicEna = disabled
- * Vamic1Ena = disabled
- * Vamic2Ena = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00),
- /*
- * Vamic1_dzout = high-Z when Vamic1 is disabled
- * Vamic2_dzout = high-Z when Vamic2 is disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00),
- /*
- * VPll = Hw controlled (NOTE! PRCMU bits)
- * VanaRegu = force off
- */
- INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02),
- /*
- * VrefDDREna = disabled
- * VrefDDRSleepMode = inactive (no pulldown)
- */
- INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00),
- /*
- * VextSupply1Regu = force LP
- * VextSupply2Regu = force OFF
- * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP)
- * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0
- * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0
- */
- INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13),
- /*
- * Vaux1Regu = force HP
- * Vaux2Regu = force off
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01),
- /*
- * Vaux3Regu = force off
- */
- INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00),
- /*
- * Vaux1Sel = 2.8 V
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C),
- /*
- * Vaux2Sel = 2.9 V
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d),
- /*
- * Vaux3Sel = 2.91 V
- */
- INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07),
- /*
- * VextSupply12LP = disabled (no LP)
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00),
- /*
- * Vaux1Disch = short discharge time
- * Vaux2Disch = short discharge time
- * Vaux3Disch = short discharge time
- * Vintcore12Disch = short discharge time
- * VTVoutDisch = short discharge time
- * VaudioDisch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00),
- /*
- * VanaDisch = short discharge time
- * VdmicPullDownEna = pulldown disabled when Vdmic is disabled
- * VdmicDisch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00),
-};
-
-/* AB8500 regulators */
-static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
- /* supplies to the display/camera */
- [AB8500_LDO_AUX1] = {
- .supply_regulator = "ab8500-ext-supply3",
- .constraints = {
- .name = "V-DISPLAY",
- .min_uV = 2800000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1, /* display is on at boot */
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
- .consumer_supplies = ab8500_vaux1_consumers,
- },
- /* supplies to the on-board eMMC */
- [AB8500_LDO_AUX2] = {
- .supply_regulator = "ab8500-ext-supply3",
- .constraints = {
- .name = "V-eMMC1",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
- .consumer_supplies = ab8500_vaux2_consumers,
- },
- /* supply for VAUX3, supplies to SDcard slots */
- [AB8500_LDO_AUX3] = {
- .supply_regulator = "ab8500-ext-supply3",
- .constraints = {
- .name = "V-MMC-SD",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
- .consumer_supplies = ab8500_vaux3_consumers,
- },
- /* supply for tvout, gpadc, TVOUT LDO */
- [AB8500_LDO_TVOUT] = {
- .constraints = {
- .name = "V-TVOUT",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
- .consumer_supplies = ab8500_vtvout_consumers,
- },
- /* supply for ab8500-vaudio, VAUDIO LDO */
- [AB8500_LDO_AUDIO] = {
- .constraints = {
- .name = "V-AUD",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
- .consumer_supplies = ab8500_vaud_consumers,
- },
- /* supply for v-anamic1 VAMic1-LDO */
- [AB8500_LDO_ANAMIC1] = {
- .constraints = {
- .name = "V-AMIC1",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
- .consumer_supplies = ab8500_vamic1_consumers,
- },
- /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
- [AB8500_LDO_ANAMIC2] = {
- .constraints = {
- .name = "V-AMIC2",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
- .consumer_supplies = ab8500_vamic2_consumers,
- },
- /* supply for v-dmic, VDMIC LDO */
- [AB8500_LDO_DMIC] = {
- .constraints = {
- .name = "V-DMIC",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
- .consumer_supplies = ab8500_vdmic_consumers,
- },
- /* supply for v-intcore12, VINTCORE12 LDO */
- [AB8500_LDO_INTCORE] = {
- .constraints = {
- .name = "V-INTCORE",
- .min_uV = 1250000,
- .max_uV = 1350000,
- .input_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE |
- REGULATOR_CHANGE_DRMS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
- .consumer_supplies = ab8500_vintcore_consumers,
- },
- /* supply for U8500 CSI-DSI, VANA LDO */
- [AB8500_LDO_ANA] = {
- .constraints = {
- .name = "V-CSI-DSI",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
- .consumer_supplies = ab8500_vana_consumers,
- },
-};
-
-/* supply for VextSupply3 */
-static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = {
- /* SIM supply for 3 V SIM cards */
- REGULATOR_SUPPLY("vinvsim", "sim-detect.0"),
-};
-
-/* extended configuration for VextSupply2, only used for HREFP_V20 boards */
-static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = {
- .hwreq = true,
-};
-
-/*
- * AB8500 external regulators
- */
-static struct regulator_init_data ab8500_ext_regulators[] = {
- /* fixed Vbat supplies VSMPS1_EXT_1V8 */
- [AB8500_EXT_SUPPLY1] = {
- .constraints = {
- .name = "ab8500-ext-supply1",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .initial_mode = REGULATOR_MODE_IDLE,
- .boot_on = 1,
- .always_on = 1,
- },
- },
- /* fixed Vbat supplies VSMPS2_EXT_1V36 and VSMPS5_EXT_1V15 */
- [AB8500_EXT_SUPPLY2] = {
- .constraints = {
- .name = "ab8500-ext-supply2",
- .min_uV = 1360000,
- .max_uV = 1360000,
- },
- },
- /* fixed Vbat supplies VSMPS3_EXT_3V4 and VSMPS4_EXT_3V4 */
- [AB8500_EXT_SUPPLY3] = {
- .constraints = {
- .name = "ab8500-ext-supply3",
- .min_uV = 3400000,
- .max_uV = 3400000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies =
- ARRAY_SIZE(ab8500_ext_supply3_consumers),
- .consumer_supplies = ab8500_ext_supply3_consumers,
- },
-};
-
-/* ab8505 regulator register initialization */
-static struct ab8500_regulator_reg_init ab8505_reg_init[] = {
- /*
- * VarmRequestCtrl
- * VsmpsCRequestCtrl
- * VsmpsARequestCtrl
- * VsmpsBRequestCtrl
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL1, 0x00, 0x00),
- /*
- * VsafeRequestCtrl
- * VpllRequestCtrl
- * VanaRequestCtrl = HP/LP depending on VxRequest
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL2, 0x30, 0x00),
- /*
- * Vaux1RequestCtrl = HP/LP depending on VxRequest
- * Vaux2RequestCtrl = HP/LP depending on VxRequest
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL3, 0xf0, 0x00),
- /*
- * Vaux3RequestCtrl = HP/LP depending on VxRequest
- * SwHPReq = Control through SWValid disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL4, 0x07, 0x00),
- /*
- * VsmpsASysClkReq1HPValid
- * VsmpsBSysClkReq1HPValid
- * VsafeSysClkReq1HPValid
- * VanaSysClkReq1HPValid = disabled
- * VpllSysClkReq1HPValid
- * Vaux1SysClkReq1HPValid = disabled
- * Vaux2SysClkReq1HPValid = disabled
- * Vaux3SysClkReq1HPValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
- /*
- * VsmpsCSysClkReq1HPValid
- * VarmSysClkReq1HPValid
- * VbbSysClkReq1HPValid
- * VsmpsMSysClkReq1HPValid
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID2, 0x00, 0x00),
- /*
- * VsmpsAHwHPReq1Valid
- * VsmpsBHwHPReq1Valid
- * VsafeHwHPReq1Valid
- * VanaHwHPReq1Valid = disabled
- * VpllHwHPReq1Valid
- * Vaux1HwHPreq1Valid = disabled
- * Vaux2HwHPReq1Valid = disabled
- * Vaux3HwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID1, 0xe8, 0x00),
- /*
- * VsmpsMHwHPReq1Valid
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID2, 0x00, 0x00),
- /*
- * VsmpsAHwHPReq2Valid
- * VsmpsBHwHPReq2Valid
- * VsafeHwHPReq2Valid
- * VanaHwHPReq2Valid = disabled
- * VpllHwHPReq2Valid
- * Vaux1HwHPReq2Valid = disabled
- * Vaux2HwHPReq2Valid = disabled
- * Vaux3HwHPReq2Valid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID1, 0xe8, 0x00),
- /*
- * VsmpsMHwHPReq2Valid
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID2, 0x00, 0x00),
- /**
- * VsmpsCSwHPReqValid
- * VarmSwHPReqValid
- * VsmpsASwHPReqValid
- * VsmpsBSwHPReqValid
- * VsafeSwHPReqValid
- * VanaSwHPReqValid
- * VanaSwHPReqValid = disabled
- * VpllSwHPReqValid
- * Vaux1SwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID1, 0xa0, 0x00),
- /*
- * Vaux2SwHPReqValid = disabled
- * Vaux3SwHPReqValid = disabled
- * VsmpsMSwHPReqValid
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID2, 0x03, 0x00),
- /*
- * SysClkReq2Valid1 = SysClkReq2 controlled
- * SysClkReq3Valid1 = disabled
- * SysClkReq4Valid1 = SysClkReq4 controlled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID1, 0x0e, 0x0a),
- /*
- * SysClkReq2Valid2 = disabled
- * SysClkReq3Valid2 = disabled
- * SysClkReq4Valid2 = disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID2, 0x0e, 0x00),
- /*
- * Vaux4SwHPReqValid
- * Vaux4HwHPReq2Valid
- * Vaux4HwHPReq1Valid
- * Vaux4SysClkReq1HPValid
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUVAUX4REQVALID, 0x00, 0x00),
- /*
- * VadcEna = disabled
- * VintCore12Ena = disabled
- * VintCore12Sel = 1.25 V
- * VintCore12LP = inactive (HP)
- * VadcLP = inactive (HP)
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUMISC1, 0xfe, 0x10),
- /*
- * VaudioEna = disabled
- * Vaux8Ena = disabled
- * Vamic1Ena = disabled
- * Vamic2Ena = disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUDIOSUPPLY, 0x1e, 0x00),
- /*
- * Vamic1_dzout = high-Z when Vamic1 is disabled
- * Vamic2_dzout = high-Z when Vamic2 is disabled
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUCTRL1VAMIC, 0x03, 0x00),
- /*
- * VsmpsARegu
- * VsmpsASelCtrl
- * VsmpsAAutoMode
- * VsmpsAPWMMode
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSAREGU, 0x00, 0x00),
- /*
- * VsmpsBRegu
- * VsmpsBSelCtrl
- * VsmpsBAutoMode
- * VsmpsBPWMMode
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSBREGU, 0x00, 0x00),
- /*
- * VsafeRegu
- * VsafeSelCtrl
- * VsafeAutoMode
- * VsafePWMMode
- */
- INIT_REGULATOR_REGISTER(AB8505_VSAFEREGU, 0x00, 0x00),
- /*
- * VPll = Hw controlled (NOTE! PRCMU bits)
- * VanaRegu = force off
- */
- INIT_REGULATOR_REGISTER(AB8505_VPLLVANAREGU, 0x0f, 0x02),
- /*
- * VextSupply1Regu = force OFF (OTP_ExtSupply12LPnPolarity 1)
- * VextSupply2Regu = force OFF (OTP_ExtSupply12LPnPolarity 1)
- * VextSupply3Regu = force OFF (OTP_ExtSupply3LPnPolarity 0)
- * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0
- * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0
- */
- INIT_REGULATOR_REGISTER(AB8505_EXTSUPPLYREGU, 0xff, 0x30),
- /*
- * Vaux1Regu = force HP
- * Vaux2Regu = force off
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUX12REGU, 0x0f, 0x01),
- /*
- * Vaux3Regu = force off
- */
- INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3REGU, 0x03, 0x00),
- /*
- * VsmpsASel1
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL1, 0x00, 0x00),
- /*
- * VsmpsASel2
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL2, 0x00, 0x00),
- /*
- * VsmpsASel3
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL3, 0x00, 0x00),
- /*
- * VsmpsBSel1
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL1, 0x00, 0x00),
- /*
- * VsmpsBSel2
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL2, 0x00, 0x00),
- /*
- * VsmpsBSel3
- */
- INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL3, 0x00, 0x00),
- /*
- * VsafeSel1
- */
- INIT_REGULATOR_REGISTER(AB8505_VSAFESEL1, 0x00, 0x00),
- /*
- * VsafeSel2
- */
- INIT_REGULATOR_REGISTER(AB8505_VSAFESEL2, 0x00, 0x00),
- /*
- * VsafeSel3
- */
- INIT_REGULATOR_REGISTER(AB8505_VSAFESEL3, 0x00, 0x00),
- /*
- * Vaux1Sel = 2.8 V
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUX1SEL, 0x0f, 0x0C),
- /*
- * Vaux2Sel = 2.9 V
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUX2SEL, 0x0f, 0x0d),
- /*
- * Vaux3Sel = 2.91 V
- */
- INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3SEL, 0x07, 0x07),
- /*
- * Vaux4RequestCtrl
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUX4REQCTRL, 0x00, 0x00),
- /*
- * Vaux4Regu
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUX4REGU, 0x00, 0x00),
- /*
- * Vaux4Sel
- */
- INIT_REGULATOR_REGISTER(AB8505_VAUX4SEL, 0x00, 0x00),
- /*
- * Vaux1Disch = short discharge time
- * Vaux2Disch = short discharge time
- * Vaux3Disch = short discharge time
- * Vintcore12Disch = short discharge time
- * VTVoutDisch = short discharge time
- * VaudioDisch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH, 0xfc, 0x00),
- /*
- * VanaDisch = short discharge time
- * Vaux8PullDownEna = pulldown disabled when Vaux8 is disabled
- * Vaux8Disch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH2, 0x16, 0x00),
- /*
- * Vaux4Disch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH3, 0x01, 0x00),
- /*
- * Vaux5Sel
- * Vaux5LP
- * Vaux5Ena
- * Vaux5Disch
- * Vaux5DisSfst
- * Vaux5DisPulld
- */
- INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX5, 0x00, 0x00),
- /*
- * Vaux6Sel
- * Vaux6LP
- * Vaux6Ena
- * Vaux6DisPulld
- */
- INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6, 0x00, 0x00),
-};
-
-static struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = {
- /* supplies to the display/camera */
- [AB8505_LDO_AUX1] = {
- .constraints = {
- .name = "V-DISPLAY",
- .min_uV = 2800000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1, /* display is on at boot */
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
- .consumer_supplies = ab8500_vaux1_consumers,
- },
- /* supplies to the on-board eMMC */
- [AB8505_LDO_AUX2] = {
- .constraints = {
- .name = "V-eMMC1",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
- .consumer_supplies = ab8500_vaux2_consumers,
- },
- /* supply for VAUX3, supplies to SDcard slots */
- [AB8505_LDO_AUX3] = {
- .constraints = {
- .name = "V-MMC-SD",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
- .consumer_supplies = ab8500_vaux3_consumers,
- },
- /* supply for VAUX4, supplies to NFC and standalone secure element */
- [AB8505_LDO_AUX4] = {
- .constraints = {
- .name = "V-NFC-SE",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux4_consumers),
- .consumer_supplies = ab8505_vaux4_consumers,
- },
- /* supply for VAUX5, supplies to TBD */
- [AB8505_LDO_AUX5] = {
- .constraints = {
- .name = "V-AUX5",
- .min_uV = 1050000,
- .max_uV = 2790000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux5_consumers),
- .consumer_supplies = ab8505_vaux5_consumers,
- },
- /* supply for VAUX6, supplies to TBD */
- [AB8505_LDO_AUX6] = {
- .constraints = {
- .name = "V-AUX6",
- .min_uV = 1050000,
- .max_uV = 2790000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux6_consumers),
- .consumer_supplies = ab8505_vaux6_consumers,
- },
- /* supply for gpadc, ADC LDO */
- [AB8505_LDO_ADC] = {
- .constraints = {
- .name = "V-ADC",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8505_vadc_consumers),
- .consumer_supplies = ab8505_vadc_consumers,
- },
- /* supply for ab8500-vaudio, VAUDIO LDO */
- [AB8505_LDO_AUDIO] = {
- .constraints = {
- .name = "V-AUD",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
- .consumer_supplies = ab8500_vaud_consumers,
- },
- /* supply for v-anamic1 VAMic1-LDO */
- [AB8505_LDO_ANAMIC1] = {
- .constraints = {
- .name = "V-AMIC1",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
- .consumer_supplies = ab8500_vamic1_consumers,
- },
- /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
- [AB8505_LDO_ANAMIC2] = {
- .constraints = {
- .name = "V-AMIC2",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
- .consumer_supplies = ab8500_vamic2_consumers,
- },
- /* supply for v-aux8, VAUX8 LDO */
- [AB8505_LDO_AUX8] = {
- .constraints = {
- .name = "V-AUX8",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux8_consumers),
- .consumer_supplies = ab8505_vaux8_consumers,
- },
- /* supply for v-intcore12, VINTCORE12 LDO */
- [AB8505_LDO_INTCORE] = {
- .constraints = {
- .name = "V-INTCORE",
- .min_uV = 1250000,
- .max_uV = 1350000,
- .input_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE |
- REGULATOR_CHANGE_DRMS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
- .consumer_supplies = ab8500_vintcore_consumers,
- },
- /* supply for LDO USB */
- [AB8505_LDO_USB] = {
- .constraints = {
- .name = "V-USB",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8505_usb_consumers),
- .consumer_supplies = ab8505_usb_consumers,
- },
- /* supply for U8500 CSI-DSI, VANA LDO */
- [AB8505_LDO_ANA] = {
- .constraints = {
- .name = "V-CSI-DSI",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
- .consumer_supplies = ab8500_vana_consumers,
- },
-};
-
-struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
- .reg_init = ab8500_reg_init,
- .num_reg_init = ARRAY_SIZE(ab8500_reg_init),
- .regulator = ab8500_regulators,
- .num_regulator = ARRAY_SIZE(ab8500_regulators),
- .ext_regulator = ab8500_ext_regulators,
- .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators),
-};
-
-struct ab8500_regulator_platform_data ab8505_regulator_plat_data = {
- .reg_init = ab8505_reg_init,
- .num_reg_init = ARRAY_SIZE(ab8505_reg_init),
- .regulator = ab8505_regulators,
- .num_regulator = ARRAY_SIZE(ab8505_regulators),
-};
-
-static void ab8500_modify_reg_init(int id, u8 mask, u8 value)
-{
- int i;
-
- if (cpu_is_u8520()) {
- for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) {
- if (ab8505_reg_init[i].id == id) {
- u8 initval = ab8505_reg_init[i].value;
- initval = (initval & ~mask) | (value & mask);
- ab8505_reg_init[i].value = initval;
-
- BUG_ON(mask & ~ab8505_reg_init[i].mask);
- return;
- }
- }
- } else {
- for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) {
- if (ab8500_reg_init[i].id == id) {
- u8 initval = ab8500_reg_init[i].value;
- initval = (initval & ~mask) | (value & mask);
- ab8500_reg_init[i].value = initval;
-
- BUG_ON(mask & ~ab8500_reg_init[i].mask);
- return;
- }
- }
- }
-
- BUG_ON(1);
-}
-
-void mop500_regulator_init(void)
-{
- struct regulator_init_data *regulator;
-
- /*
- * Temporarily turn on Vaux2 on 8520 machine
- */
- if (cpu_is_u8520()) {
- /* Vaux2 initialized to be on */
- ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05);
- }
-
- /*
- * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for
- * all HREFP_V20 boards)
- */
- if (cpu_is_u8500v20()) {
- /* VextSupply2RequestCtrl = HP/OFF depending on VxRequest */
- ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01);
-
- /* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */
- ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2,
- 0x20, 0x20);
-
- /* VextSupply2 = force HP at initialization */
- ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04);
-
- /* enable VextSupply2 during platform active */
- regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
- regulator->constraints.always_on = 1;
-
- /* disable VextSupply2 in suspend */
- regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2];
- regulator->constraints.state_mem.disabled = 1;
- regulator->constraints.state_standby.disabled = 1;
-
- /* enable VextSupply2 HW control (used in suspend) */
- regulator->driver_data = (void *)&ab8500_ext_supply2;
- }
-}
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
deleted file mode 100644
index 9bece38fe933..000000000000
--- a/arch/arm/mach-ux500/board-mop500-regulators.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
- *
- * MOP500 board specific initialization for regulators
- */
-
-#ifndef __BOARD_MOP500_REGULATORS_H
-#define __BOARD_MOP500_REGULATORS_H
-
-#include <linux/regulator/machine.h>
-#include <linux/regulator/ab8500.h>
-
-extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data;
-extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data;
-extern struct regulator_init_data tps61052_regulator;
-extern struct regulator_init_data gpio_en_3v3_regulator;
-
-void mop500_regulator_init(void);
-
-#endif
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
deleted file mode 100644
index 780bd13cd7e3..000000000000
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/outercache.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "db8500-regs.h"
-#include "id.h"
-
-static int __init ux500_l2x0_unlock(void)
-{
- int i;
- struct device_node *np;
- void __iomem *l2x0_base;
-
- np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
- l2x0_base = of_iomap(np, 0);
- of_node_put(np);
- if (!l2x0_base)
- return -ENODEV;
-
- /*
- * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
- * apparently locks both caches before jumping to the kernel. The
- * l2x0 core will not touch the unlock registers if the l2x0 is
- * already enabled, so we do it right here instead. The PL310 has
- * 8 sets of registers, one per possible CPU.
- */
- for (i = 0; i < 8; i++) {
- writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
- i * L2X0_LOCKDOWN_STRIDE);
- writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
- i * L2X0_LOCKDOWN_STRIDE);
- }
- iounmap(l2x0_base);
- return 0;
-}
-
-static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
-{
- /*
- * We can't write to secure registers as we are in non-secure
- * mode, until we have some SMI service available.
- */
-}
-
-static int __init ux500_l2x0_init(void)
-{
- /* Multiplatform guard */
- if (!((cpu_is_u8500_family() || cpu_is_ux540_family())))
- return -ENODEV;
-
- /* Unlock before init */
- ux500_l2x0_unlock();
- outer_cache.write_sec = ux500_l2c310_write_sec;
- l2x0_of_init(0, ~0);
-
- return 0;
-}
-early_initcall(ux500_l2x0_init);
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index a557955472ea..46b1da1bf5d2 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -12,41 +12,107 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
+#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/arm-ux500-pm.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/dbx500-prcmu.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/perf/arm_pmu.h>
#include <linux/regulator/machine.h>
-#include <linux/random.h>
+#include <asm/outercache.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
#include "setup.h"
-#include "board-mop500-regulators.h"
#include "board-mop500.h"
#include "db8500-regs.h"
-#include "id.h"
-static struct ab8500_platform_data ab8500_platdata = {
- .regulator = &ab8500_regulator_plat_data,
-};
+static int __init ux500_l2x0_unlock(void)
+{
+ int i;
+ struct device_node *np;
+ void __iomem *l2x0_base;
-static struct prcmu_pdata db8500_prcmu_pdata = {
- .ab_platdata = &ab8500_platdata,
- .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET,
- .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET,
-};
+ np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
+ l2x0_base = of_iomap(np, 0);
+ of_node_put(np);
+ if (!l2x0_base)
+ return -ENODEV;
+
+ /*
+ * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
+ * apparently locks both caches before jumping to the kernel. The
+ * l2x0 core will not touch the unlock registers if the l2x0 is
+ * already enabled, so we do it right here instead. The PL310 has
+ * 8 sets of registers, one per possible CPU.
+ */
+ for (i = 0; i < 8; i++) {
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ }
+ iounmap(l2x0_base);
+ return 0;
+}
+
+static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+ /*
+ * We can't write to secure registers as we are in non-secure
+ * mode, until we have some SMI service available.
+ */
+}
-static void __init u8500_map_io(void)
+/*
+ * FIXME: Should we set up the GPIO domain here?
+ *
+ * The problem is that we cannot put the interrupt resources into the platform
+ * device until the irqdomain has been added. Right now, we set the GIC interrupt
+ * domain from init_irq(), then load the gpio driver from
+ * core_initcall(nmk_gpio_init) and add the platform devices from
+ * arch_initcall(customize_machine).
+ *
+ * This feels fragile because it depends on the gpio device getting probed
+ * _before_ any device uses the gpio interrupts.
+*/
+static void __init ux500_init_irq(void)
+{
+ struct device_node *np;
+ struct resource r;
+
+ irqchip_init();
+ np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
+ of_address_to_resource(np, 0, &r);
+ of_node_put(np);
+ if (!r.start) {
+ pr_err("could not find PRCMU base resource\n");
+ return;
+ }
+ prcmu_early_init(r.start, r.end-r.start);
+ ux500_pm_init(r.start, r.end-r.start);
+
+ /* Unlock before init */
+ ux500_l2x0_unlock();
+ outer_cache.write_sec = ux500_l2c310_write_sec;
+}
+
+static void ux500_restart(enum reboot_mode mode, const char *cmd)
{
- debug_ll_io_init();
- ux500_setup_id();
+ local_irq_disable();
+ local_fiq_disable();
+
+ prcmu_system_reset(0);
}
/*
@@ -73,31 +139,6 @@ static struct arm_pmu_platdata db8500_pmu_platdata = {
.handle_irq = db8500_pmu_handler,
};
-static const char *db8500_read_soc_id(void)
-{
- void __iomem *uid;
- const char *retstr;
-
- uid = ioremap(U8500_BB_UID_BASE, 0x20);
- if (!uid)
- return NULL;
- /* Throw these device-specific numbers into the entropy pool */
- add_device_randomness(uid, 0x14);
- retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
- readl((u32 *)uid+0),
- readl((u32 *)uid+1), readl((u32 *)uid+2),
- readl((u32 *)uid+3), readl((u32 *)uid+4));
- iounmap(uid);
- return retstr;
-}
-
-static struct device * __init db8500_soc_device_init(void)
-{
- const char *soc_id = db8500_read_soc_id();
-
- return ux500_soc_device_init(soc_id);
-}
-
static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
@@ -111,8 +152,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
"ux500-msp-i2s.3", &msp3_platform_data),
/* Requires non-DT:able platform data. */
- OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
- &db8500_prcmu_pdata),
+ OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
@@ -121,8 +161,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
};
static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
- &db8500_prcmu_pdata),
+ OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
{},
};
@@ -136,15 +175,13 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
static void __init u8500_init_machine(void)
{
- struct device *parent = db8500_soc_device_init();
-
/* automatically probe child nodes of dbx5x0 devices */
if (of_machine_is_compatible("st-ericsson,u8540"))
of_platform_populate(NULL, u8500_local_bus_nodes,
- u8540_auxdata_lookup, parent);
+ u8540_auxdata_lookup, NULL);
else
of_platform_populate(NULL, u8500_local_bus_nodes,
- u8500_auxdata_lookup, parent);
+ u8500_auxdata_lookup, NULL);
}
static const char * stericsson_dt_platform_compat[] = {
@@ -156,10 +193,10 @@ static const char * stericsson_dt_platform_compat[] = {
};
DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
- .map_io = u8500_map_io,
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
.init_irq = ux500_init_irq,
.init_machine = u8500_init_machine,
- .init_late = NULL,
.dt_compat = stericsson_dt_platform_compat,
.restart = ux500_restart,
MACHINE_END
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
deleted file mode 100644
index 82156cbc22ce..000000000000
--- a/arch/arm/mach-ux500/cpu.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mfd/dbx500-prcmu.h>
-#include <linux/sys_soc.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/irq.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-ux500.h>
-#include <linux/platform_data/arm-ux500-pm.h>
-
-#include <asm/mach/map.h>
-
-#include "setup.h"
-
-#include "board-mop500.h"
-#include "db8500-regs.h"
-#include "id.h"
-
-void ux500_restart(enum reboot_mode mode, const char *cmd)
-{
- local_irq_disable();
- local_fiq_disable();
-
- prcmu_system_reset(0);
-}
-
-/*
- * FIXME: Should we set up the GPIO domain here?
- *
- * The problem is that we cannot put the interrupt resources into the platform
- * device until the irqdomain has been added. Right now, we set the GIC interrupt
- * domain from init_irq(), then load the gpio driver from
- * core_initcall(nmk_gpio_init) and add the platform devices from
- * arch_initcall(customize_machine).
- *
- * This feels fragile because it depends on the gpio device getting probed
- * _before_ any device uses the gpio interrupts.
-*/
-void __init ux500_init_irq(void)
-{
- struct device_node *np;
- struct resource r;
-
- irqchip_init();
- np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
- of_address_to_resource(np, 0, &r);
- of_node_put(np);
- if (!r.start) {
- pr_err("could not find PRCMU base resource\n");
- return;
- }
- prcmu_early_init(r.start, r.end-r.start);
- ux500_pm_init(r.start, r.end-r.start);
-
- /*
- * Init clocks here so that they are available for system timer
- * initialization.
- */
- if (cpu_is_u8500_family())
- u8500_clk_init();
- else if (cpu_is_u9540())
- u9540_clk_init();
- else if (cpu_is_u8540())
- u8540_clk_init();
-}
-
-static const char * __init ux500_get_machine(void)
-{
- return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
-}
-
-static const char * __init ux500_get_family(void)
-{
- return kasprintf(GFP_KERNEL, "ux500");
-}
-
-static const char * __init ux500_get_revision(void)
-{
- unsigned int rev = dbx500_revision();
-
- if (rev == 0x01)
- return kasprintf(GFP_KERNEL, "%s", "ED");
- else if (rev >= 0xA0)
- return kasprintf(GFP_KERNEL, "%d.%d",
- (rev >> 4) - 0xA + 1, rev & 0xf);
-
- return kasprintf(GFP_KERNEL, "%s", "Unknown");
-}
-
-static ssize_t ux500_get_process(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- if (dbx500_id.process == 0x00)
- return sprintf(buf, "Standard\n");
-
- return sprintf(buf, "%02xnm\n", dbx500_id.process);
-}
-
-static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
- const char *soc_id)
-{
- soc_dev_attr->soc_id = soc_id;
- soc_dev_attr->machine = ux500_get_machine();
- soc_dev_attr->family = ux500_get_family();
- soc_dev_attr->revision = ux500_get_revision();
-}
-
-static const struct device_attribute ux500_soc_attr =
- __ATTR(process, S_IRUGO, ux500_get_process, NULL);
-
-struct device * __init ux500_soc_device_init(const char *soc_id)
-{
- struct device *parent;
- struct soc_device *soc_dev;
- struct soc_device_attribute *soc_dev_attr;
-
- soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
- if (!soc_dev_attr)
- return ERR_PTR(-ENOMEM);
-
- soc_info_populate(soc_dev_attr, soc_id);
-
- soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR(soc_dev)) {
- kfree(soc_dev_attr);
- return NULL;
- }
-
- parent = soc_device_to_device(soc_dev);
- device_create_file(parent, &ux500_soc_attr);
-
- return parent;
-}
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
deleted file mode 100644
index 1e81e990044b..000000000000
--- a/arch/arm/mach-ux500/id.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <asm/mach/map.h>
-
-#include "setup.h"
-
-#include "db8500-regs.h"
-#include "id.h"
-
-struct dbx500_asic_id dbx500_id;
-
-static unsigned int __init ux500_read_asicid(phys_addr_t addr)
-{
- phys_addr_t base = addr & ~0xfff;
- struct map_desc desc = {
- .virtual = (unsigned long)UX500_VIRT_ROM,
- .pfn = __phys_to_pfn(base),
- .length = SZ_16K,
- .type = MT_DEVICE,
- };
-
- iotable_init(&desc, 1);
-
- /* As in devicemaps_init() */
- local_flush_tlb_all();
- flush_cache_all();
-
- return readl(UX500_VIRT_ROM + (addr & 0xfff));
-}
-
-static void ux500_print_soc_info(unsigned int asicid)
-{
- unsigned int rev = dbx500_revision();
-
- pr_info("DB%4x ", dbx500_partnumber());
-
- if (rev == 0x01)
- pr_cont("Early Drop");
- else if (rev >= 0xA0)
- pr_cont("v%d.%d" , (rev >> 4) - 0xA + 1, rev & 0xf);
- else
- pr_cont("Unknown");
-
- pr_cont(" [%#010x]\n", asicid);
-}
-
-static unsigned int partnumber(unsigned int asicid)
-{
- return (asicid >> 8) & 0xffff;
-}
-
-/*
- * SOC MIDR ASICID ADDRESS ASICID VALUE
- * DB8500ed 0x410fc090 0x9001FFF4 0x00850001
- * DB8500v1 0x411fc091 0x9001FFF4 0x008500A0
- * DB8500v1.1 0x411fc091 0x9001FFF4 0x008500A1
- * DB8500v2 0x412fc091 0x9001DBF4 0x008500B0
- * DB8520v2.2 0x412fc091 0x9001DBF4 0x008500B2
- * DB5500v1 0x412fc091 0x9001FFF4 0x005500A0
- * DB9540 0x413fc090 0xFFFFDBF4 0x009540xx
- */
-
-void __init ux500_setup_id(void)
-{
- unsigned int cpuid = read_cpuid_id();
- unsigned int asicid = 0;
- phys_addr_t addr = 0;
-
- switch (cpuid) {
- case 0x410fc090: /* DB8500ed */
- case 0x411fc091: /* DB8500v1 */
- addr = 0x9001FFF4;
- break;
-
- case 0x412fc091: /* DB8520 / DB8500v2 / DB5500v1 */
- asicid = ux500_read_asicid(0x9001DBF4);
- if (partnumber(asicid) == 0x8500 ||
- partnumber(asicid) == 0x8520)
- /* DB8500v2 */
- break;
-
- /* DB5500v1 */
- addr = 0x9001FFF4;
- break;
-
- case 0x413fc090: /* DB9540 */
- addr = 0xFFFFDBF4;
- break;
- }
-
- if (addr)
- asicid = ux500_read_asicid(addr);
-
- if (!asicid) {
- pr_err("Unable to identify SoC\n");
- ux500_unknown_soc();
- }
-
- dbx500_id.process = asicid >> 24;
- dbx500_id.partnumber = partnumber(asicid);
- dbx500_id.revision = asicid & 0xff;
-
- ux500_print_soc_info(asicid);
-}
diff --git a/arch/arm/mach-ux500/id.h b/arch/arm/mach-ux500/id.h
deleted file mode 100644
index bcc58a8cccbc..000000000000
--- a/arch/arm/mach-ux500/id.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_UX500_ID
-#define __MACH_UX500_ID
-
-/**
- * struct dbx500_asic_id - fields of the ASIC ID
- * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard"
- * @partnumber: hithereto 0x8500 for DB8500
- * @revision: version code in the series
- */
-struct dbx500_asic_id {
- u16 partnumber;
- u8 revision;
- u8 process;
-};
-
-extern struct dbx500_asic_id dbx500_id;
-
-static inline unsigned int __attribute_const__ dbx500_partnumber(void)
-{
- return dbx500_id.partnumber;
-}
-
-static inline unsigned int __attribute_const__ dbx500_revision(void)
-{
- return dbx500_id.revision;
-}
-
-/*
- * SOCs
- */
-
-static inline bool __attribute_const__ cpu_is_u8500(void)
-{
- return dbx500_partnumber() == 0x8500;
-}
-
-static inline bool __attribute_const__ cpu_is_u8520(void)
-{
- return dbx500_partnumber() == 0x8520;
-}
-
-static inline bool cpu_is_u8500_family(void)
-{
- return cpu_is_u8500() || cpu_is_u8520();
-}
-
-static inline bool __attribute_const__ cpu_is_u9540(void)
-{
- return dbx500_partnumber() == 0x9540;
-}
-
-static inline bool __attribute_const__ cpu_is_u8540(void)
-{
- return dbx500_partnumber() == 0x8540;
-}
-
-static inline bool __attribute_const__ cpu_is_u8580(void)
-{
- return dbx500_partnumber() == 0x8580;
-}
-
-static inline bool cpu_is_ux540_family(void)
-{
- return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580();
-}
-
-/*
- * 8500 revisions
- */
-
-static inline bool __attribute_const__ cpu_is_u8500ed(void)
-{
- return cpu_is_u8500() && dbx500_revision() == 0x00;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v1(void)
-{
- return cpu_is_u8500() && (dbx500_revision() & 0xf0) == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v10(void)
-{
- return cpu_is_u8500() && dbx500_revision() == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v11(void)
-{
- return cpu_is_u8500() && dbx500_revision() == 0xA1;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v2(void)
-{
- return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0);
-}
-
-static inline bool cpu_is_u8500v20(void)
-{
- return cpu_is_u8500() && (dbx500_revision() == 0xB0);
-}
-
-static inline bool cpu_is_u8500v21(void)
-{
- return cpu_is_u8500() && (dbx500_revision() == 0xB1);
-}
-
-static inline bool cpu_is_u8500v22(void)
-{
- return cpu_is_u8500() && (dbx500_revision() == 0xB2);
-}
-
-static inline bool cpu_is_u8500v20_or_later(void)
-{
- return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
-}
-
-/*
- * 8540 revisions
- */
-
-static inline bool __attribute_const__ cpu_is_u8540v10(void)
-{
- return cpu_is_u8540() && dbx500_revision() == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8580v10(void)
-{
- return cpu_is_u8580() && dbx500_revision() == 0xA0;
-}
-
-static inline bool ux500_is_svp(void)
-{
- return false;
-}
-
-#define ux500_unknown_soc() BUG()
-
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 88b8ab4f300c..8f2f615ff958 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -26,7 +26,6 @@
#include "setup.h"
#include "db8500-regs.h"
-#include "id.h"
/* Magic triggers in backup RAM */
#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index c704254ab67c..988e7c77068d 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -11,18 +11,6 @@
#ifndef __ASM_ARCH_SETUP_H
#define __ASM_ARCH_SETUP_H
-#include <asm/mach/arch.h>
-#include <linux/init.h>
-#include <linux/mfd/abx500/ab8500.h>
-
-void ux500_restart(enum reboot_mode mode, const char *cmd);
-
-void __init ux500_setup_id(void);
-
-extern void __init ux500_init_irq(void);
-
-extern struct device *ux500_soc_device_init(const char *soc_id);
-
extern void ux500_cpu_die(unsigned int cpu);
#endif /* __ASM_ARCH_SETUP_H */
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 189d21541f9c..c19b82799a34 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -5,6 +5,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/hisi,hi6220-resets.h>
#include <dt-bindings/clock/hi6220-clock.h>
#include <dt-bindings/pinctrl/hisi.h>
#include <dt-bindings/thermal/thermal.h>
@@ -252,6 +253,7 @@
compatible = "hisilicon,hi6220-mediactrl", "syscon";
reg = <0x0 0xf4410000 0x0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
pm_ctrl: pm_ctrl@f7032000 {