Merge tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.11, please pull the following:

- Rafal adds initial support for the Broadcom 4908 which are SoCs used
  in home routers and are based on the DSL architecture and using
  Broadcom Brahma-B53 CPUs.

* tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: add config for Broadcom BCM4908 SoCs
  arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files
  dt-bindings: arm: bcm: document BCM4908 bindings

Link: https://lore.kernel.org/r/20201128163410.1691529-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

6 files changed, 265 insertions, 0 deletions

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 5c4ac1c9f4e0..f3134de9c220 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -43,6 +43,14 @@ config ARCH_BCM2835
 	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
 	  These SoCs are used in the Raspberry Pi 3 and 4 devices.
 
+config ARCH_BCM4908
+	bool "Broadcom BCM4908 family"
+	select GPIOLIB
+	help
+	  This enables support for the Broadcom BCM4906, BCM4908 and
+	  BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be
+	  found in home routers.
+
 config ARCH_BCM_IPROC
 	bool "Broadcom iProc SoC Family"
 	select COMMON_CLK_IPROC
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index cb7de8d99223..998e240aa698 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -5,5 +5,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb \
 			      bcm2837-rpi-3-b-plus.dtb \
 			      bcm2837-rpi-cm3-io3.dtb
 
+subdir-y	+= bcm4908
 subdir-y	+= northstar2
 subdir-y	+= stingray
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
new file mode 100644
index 000000000000..ef26c23603ce
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
new file mode 100644
index 000000000000..13c6b86eef21
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "bcm4908.dtsi"
+
+/ {
+	compatible = "asus,gt-ac5300", "brcm,bcm4908";
+	model = "Asus GT-AC5300";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x40000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		wifi {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+		};
+
+		brightness {
+			label = "LEDs";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	nand-on-flash-bbt;
+	brcm,nand-has-wp;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "cferom";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
new file mode 100644
index 000000000000..f873dc44ce9c
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+/ {
+	interrupt-parent = <&gic>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x81000000 0x4000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x2000 0x2000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	clocks {
+		periph_clk: periph_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x80000000 0x10000>;
+
+		usb@c300 {
+			compatible = "generic-ehci";
+			reg = <0xc300 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		usb@c400 {
+			compatible = "generic-ohci";
+			reg = <0xc400 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		usb@d000 {
+			compatible = "generic-xhci";
+			reg = <0xd000 0x8c8>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0xff800000 0x3000>;
+
+		timer: timer@400 {
+			compatible = "brcm,bcm6328-timer", "syscon";
+			reg = <0x400 0x3c>;
+		};
+
+		gpio0: gpio-controller@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg-names = "dirout", "dat";
+			reg = <0x500 0x28>, <0x528 0x28>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x18>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "okay";
+		};
+
+		nand@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nand";
+			status = "okay";
+
+			nandcs: nandcs@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&timer>;
+			offset = <0x34>;
+			mask = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5cfe3cf6f2ac..fd3d042bedde 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -32,6 +32,7 @@ CONFIG_ARCH_AGILEX=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_BCM4908=y
 CONFIG_ARCH_BCM_IPROC=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_ARCH_BRCMSTB=y