x86/delay: Introduce TPAUSE delay

TPAUSE instructs the processor to enter an implementation-dependent
optimized state. The instruction execution wakes up when the time-stamp
counter reaches or exceeds the implicit EDX:EAX 64-bit input value.
The instruction execution also wakes up due to the expiration of
the operating system time-limit or by an external interrupt
or exceptions such as a debug exception or a machine check exception.

TPAUSE offers a choice of two lower power states:
 1. Light-weight power/performance optimized state C0.1
 2. Improved power/performance optimized state C0.2

This way, it can save power with low wake-up latency in comparison to
spinloop based delay. The selection between the two is governed by the
input register.

TPAUSE is available on processors with X86_FEATURE_WAITPKG.

Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1587757076-30337-4-git-send-email-kyung.min.park@intel.com

1 files changed, 27 insertions, 0 deletions

diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index fe91dc171cf8..65d15df6212d 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -97,6 +97,27 @@ static void delay_tsc(u64 cycles)
 }
 
 /*
+ * On Intel the TPAUSE instruction waits until any of:
+ * 1) the TSC counter exceeds the value provided in EDX:EAX
+ * 2) global timeout in IA32_UMWAIT_CONTROL is exceeded
+ * 3) an external interrupt occurs
+ */
+static void delay_halt_tpause(u64 start, u64 cycles)
+{
+	u64 until = start + cycles;
+	u32 eax, edx;
+
+	eax = lower_32_bits(until);
+	edx = upper_32_bits(until);
+
+	/*
+	 * Hard code the deeper (C0.2) sleep state because exit latency is
+	 * small compared to the "microseconds" that usleep() will delay.
+	 */
+	__tpause(TPAUSE_C02_STATE, edx, eax);
+}
+
+/*
  * On some AMD platforms, MWAITX has a configurable 32-bit timer, that
  * counts with TSC frequency. The input value is the number of TSC cycles
  * to wait. MWAITX will also exit when the timer expires.
@@ -156,6 +177,12 @@ void __init use_tsc_delay(void)
 		delay_fn = delay_tsc;
 }
 
+void __init use_tpause_delay(void)
+{
+	delay_halt_fn = delay_halt_tpause;
+	delay_fn = delay_halt;
+}
+
 void use_mwaitx_delay(void)
 {
 	delay_halt_fn = delay_halt_mwaitx;