x86/platform/uv: Remove SCIR MMR references for UV systems

UV class systems no longer use System Controller for monitoring of CPU
activity provided by this driver. Other methods have been developed for
BIOS and the management controller (BMC). Remove that supporting code.

Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Link: https://lkml.kernel.org/r/20201005203929.148656-3-mike.travis@hpe.com

1 files changed, 0 insertions, 82 deletions

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 0b6eea3f54e6..f51fabf56010 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -909,85 +909,6 @@ static __init void uv_rtc_init(void)
 	}
 }
 
-/*
- * percpu heartbeat timer
- */
-static void uv_heartbeat(struct timer_list *timer)
-{
-	unsigned char bits = uv_scir_info->state;
-
-	/* Flip heartbeat bit: */
-	bits ^= SCIR_CPU_HEARTBEAT;
-
-	/* Is this CPU idle? */
-	if (idle_cpu(raw_smp_processor_id()))
-		bits &= ~SCIR_CPU_ACTIVITY;
-	else
-		bits |= SCIR_CPU_ACTIVITY;
-
-	/* Update system controller interface reg: */
-	uv_set_scir_bits(bits);
-
-	/* Enable next timer period: */
-	mod_timer(timer, jiffies + SCIR_CPU_HB_INTERVAL);
-}
-
-static int uv_heartbeat_enable(unsigned int cpu)
-{
-	while (!uv_cpu_scir_info(cpu)->enabled) {
-		struct timer_list *timer = &uv_cpu_scir_info(cpu)->timer;
-
-		uv_set_cpu_scir_bits(cpu, SCIR_CPU_HEARTBEAT|SCIR_CPU_ACTIVITY);
-		timer_setup(timer, uv_heartbeat, TIMER_PINNED);
-		timer->expires = jiffies + SCIR_CPU_HB_INTERVAL;
-		add_timer_on(timer, cpu);
-		uv_cpu_scir_info(cpu)->enabled = 1;
-
-		/* Also ensure that boot CPU is enabled: */
-		cpu = 0;
-	}
-	return 0;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-static int uv_heartbeat_disable(unsigned int cpu)
-{
-	if (uv_cpu_scir_info(cpu)->enabled) {
-		uv_cpu_scir_info(cpu)->enabled = 0;
-		del_timer(&uv_cpu_scir_info(cpu)->timer);
-	}
-	uv_set_cpu_scir_bits(cpu, 0xff);
-	return 0;
-}
-
-static __init void uv_scir_register_cpu_notifier(void)
-{
-	cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "x86/x2apic-uvx:online",
-				  uv_heartbeat_enable, uv_heartbeat_disable);
-}
-
-#else /* !CONFIG_HOTPLUG_CPU */
-
-static __init void uv_scir_register_cpu_notifier(void)
-{
-}
-
-static __init int uv_init_heartbeat(void)
-{
-	int cpu;
-
-	if (is_uv_system()) {
-		for_each_online_cpu(cpu)
-			uv_heartbeat_enable(cpu);
-	}
-
-	return 0;
-}
-
-late_initcall(uv_init_heartbeat);
-
-#endif /* !CONFIG_HOTPLUG_CPU */
-
 /* Direct Legacy VGA I/O traffic to designated IOH */
 static int uv_set_vga_state(struct pci_dev *pdev, bool decode, unsigned int command_bits, u32 flags)
 {
@@ -1517,8 +1438,6 @@ static void __init uv_system_init_hub(void)
 			uv_hub_info_list(numa_node_id)->pnode = pnode;
 		else if (uv_cpu_hub_info(cpu)->pnode == 0xffff)
 			uv_cpu_hub_info(cpu)->pnode = pnode;
-
-		uv_cpu_scir_info(cpu)->offset = uv_scir_offset(apicid);
 	}
 
 	for_each_node(nodeid) {
@@ -1547,7 +1466,6 @@ static void __init uv_system_init_hub(void)
 
 	uv_nmi_setup();
 	uv_cpu_init();
-	uv_scir_register_cpu_notifier();
 	uv_setup_proc_files(0);
 
 	/* Register Legacy VGA I/O redirection handler: */