arch: remove unicore32 port

The unicore32 port do not seem maintained for a long time now, there is no
upstream toolchain that can create unicore32 binaries and all the links to
prebuilt toolchains for unicore32 are dead. Even compilers that were
available are not supported by the kernel anymore.

Guenter Roeck says:

  I have stopped building unicore32 images since v4.19 since there is no
  available compiler that is still supported by the kernel. I am surprised
  that support for it has not been removed from the kernel.

Remove unicore32 port.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 0 insertions, 131 deletions

diff --git a/arch/unicore32/mm/proc-ucv2.S b/arch/unicore32/mm/proc-ucv2.S
deleted file mode 100644
index 18f8c4fb21a0..000000000000
--- a/arch/unicore32/mm/proc-ucv2.S
+++ /dev/null
@@ -1,131 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/mm/proc-ucv2.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <linux/pgtable.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-
-#include "proc-macros.S"
-
-ENTRY(cpu_proc_fin)
-	stm.w	(lr), [sp-]
-	mov	ip, #PSR_R_BIT | PSR_I_BIT | PRIV_MODE
-	mov.a	asr, ip
-	b.l	__cpuc_flush_kern_all
-	ldm.w	(pc), [sp]+
-
-/*
- *	cpu_reset(loc)
- *
- *	Perform a soft reset of the system.  Put the CPU into the
- *	same state as it would be if it had been reset, and branch
- *	to what would be the reset vector.
- *
- *	- loc   - location to jump to for soft reset
- */
-	.align	5
-ENTRY(cpu_reset)
-	mov	ip, #0
-	movc	p0.c5, ip, #28			@ Cache invalidate all
-	nop8
-
-	movc	p0.c6, ip, #6			@ TLB invalidate all
-	nop8
-
-	movc	ip, p0.c1, #0			@ ctrl register
-	or	ip, ip, #0x2000			@ vector base address
-	andn	ip, ip, #0x000f			@ ............idam
-	movc	p0.c1, ip, #0			@ disable caches and mmu
-	nop
-	mov	pc, r0				@ jump to loc
-	nop8
-
-/*
- *	cpu_do_idle()
- *
- *	Idle the processor (eg, wait for interrupt).
- *
- *	IRQs are already disabled.
- */
-ENTRY(cpu_do_idle)
-	mov	r0, #0				@ PCI address
-	.rept	8
-	ldw	r1, [r0]
-	.endr
-	mov	pc, lr
-
-ENTRY(cpu_dcache_clean_area)
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
-	csub.a	r1, #MAX_AREA_SIZE
-	bsg	101f
-	mov	r9, #PAGE_SZ
-	sub	r9, r9, #1			@ PAGE_MASK
-1:	va2pa	r0, r10, r11, r12, r13		@ r10 is PA
-	b	3f
-2:	cand.a	r0, r9
-	beq	1b
-3:	movc	p0.c5, r10, #11			@ clean D entry
-	nop8
-	add	r0, r0, #CACHE_LINESIZE
-	add	r10, r10, #CACHE_LINESIZE
-	sub.a	r1, r1, #CACHE_LINESIZE
-	bua	2b
-	mov	pc, lr
-#endif
-101:	mov	ip, #0
-	movc	p0.c5, ip, #10			@ Dcache clean all
-	nop8
-
-	mov	pc, lr
-
-/*
- *	cpu_do_switch_mm(pgd_phys)
- *
- *	Set the translation table base pointer to be pgd_phys
- *
- *	- pgd_phys - physical address of new pgd
- *
- *	It is assumed that:
- *	- we are not using split page tables
- */
-	.align	5
-ENTRY(cpu_do_switch_mm)
-	movc	p0.c2, r0, #0			@ update page table ptr
-	nop8
-
-	movc	p0.c6, ip, #6			@ TLB invalidate all
-	nop8
-
-	mov	pc, lr
-
-/*
- *	cpu_set_pte(ptep, pte)
- *
- *	Set a level 2 translation table entry.
- *
- *	- ptep  - pointer to level 2 translation table entry
- *	- pte   - PTE value to store
- */
-	.align	5
-ENTRY(cpu_set_pte)
-	stw	r1, [r0]
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
-	sub	r2, r0, #PAGE_OFFSET
-	movc	p0.c5, r2, #11				@ Dcache clean line
-	nop8
-#else
-	mov	ip, #0
-	movc	p0.c5, ip, #10				@ Dcache clean all
-	nop8
-	@dcacheline_flush	r0, r2, ip
-#endif
-	mov	pc, lr
-