arch: remove unicore32 port

The unicore32 port do not seem maintained for a long time now, there is no
upstream toolchain that can create unicore32 binaries and all the links to
prebuilt toolchains for unicore32 are dead. Even compilers that were
available are not supported by the kernel anymore.

Guenter Roeck says:

  I have stopped building unicore32 images since v4.19 since there is no
  available compiler that is still supported by the kernel. I am surprised
  that support for it has not been removed from the kernel.

Remove unicore32 port.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 0 insertions, 168 deletions

diff --git a/arch/unicore32/lib/backtrace.S b/arch/unicore32/lib/backtrace.S
deleted file mode 100644
index 6221944b81f3..000000000000
--- a/arch/unicore32/lib/backtrace.S
+++ /dev/null
@@ -1,168 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/backtrace.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-		.text
-
-@ fp is 0 or stack frame
-
-#define frame	v4
-#define sv_fp	v5
-#define sv_pc	v6
-#define offset	v8
-#define loglvl	v9
-
-ENTRY(__backtrace)
-		mov	r0, fp
-
-ENTRY(c_backtrace)
-
-#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
-		mov	pc, lr
-ENDPROC(__backtrace)
-ENDPROC(c_backtrace)
-#else
-		stm.w	(v4 - v10, lr), [sp-]	@ Save an extra register
-						@ so we have a location...
-		mov.a	frame, r0		@ if frame pointer is zero
-		beq	no_frame		@ we have no stack frames
-		mov	loglvl, r1
-
-1:		stm.w	(pc), [sp-]		@ calculate offset of PC stored
-		ldw.w	r0, [sp]+, #4		@ by stmfd for this CPU
-		adr	r1, 1b
-		sub	offset, r0, r1
-
-/*
- * Stack frame layout:
- *             optionally saved caller registers (r4 - r10)
- *             saved fp
- *             saved sp
- *             saved lr
- *    frame => saved pc
- *             optionally saved arguments (r0 - r3)
- * saved sp => <next word>
- *
- * Functions start with the following code sequence:
- *                  mov   ip, sp
- *                  stm.w (r0 - r3), [sp-] (optional)
- * corrected pc =>  stm.w sp, (..., fp, ip, lr, pc)
- */
-for_each_frame:
-
-1001:		ldw	sv_pc, [frame+], #0	@ get saved pc
-1002:		ldw	sv_fp, [frame+], #-12	@ get saved fp
-
-		sub	sv_pc, sv_pc, offset	@ Correct PC for prefetching
-
-1003:		ldw	r2, [sv_pc+], #-4	@ if stmfd sp, {args} exists,
-		ldw	r3, .Ldsi+4		@ adjust saved 'pc' back one
-		cxor.a	r3, r2 >> #14		@ instruction
-		beq	201f
-		sub	r0, sv_pc, #4		@ allow for mov
-		b	202f
-201:
-		sub	r0, sv_pc, #8		@ allow for mov + stmia
-202:
-		ldw	r1, [frame+], #-4	@ get saved lr
-		mov	r2, frame
-		b.l	dump_backtrace_entry
-
-		ldw	r1, [sv_pc+], #-4	@ if stmfd sp, {args} exists,
-		ldw	r3, .Ldsi+4
-		cxor.a	r3, r1 >> #14
-		bne	1004f
-		ldw	r0, [frame+], #-8	@ get sp
-		sub	r0, r0, #4		@ point at the last arg
-		b.l	.Ldumpstm		@ dump saved registers
-
-1004:		ldw	r1, [sv_pc+], #0	@ if stmfd {, fp, ip, lr, pc}
-		ldw	r3, .Ldsi		@ instruction exists,
-		cxor.a	r3, r1 >> #14
-		bne	201f
-		sub	r0, frame, #16
-		b.l	.Ldumpstm		@ dump saved registers
-201:
-		cxor.a	sv_fp, #0		@ zero saved fp means
-		beq	no_frame		@ no further frames
-
-		csub.a	sv_fp, frame		@ next frame must be
-		mov	frame, sv_fp		@ above the current frame
-		bua	for_each_frame
-
-1006:		adr	r0, .Lbad
-		mov	r1, loglvl
-		mov	r2, frame
-		b.l	printk
-no_frame:	ldm.w	(v4 - v10, pc), [sp]+
-ENDPROC(__backtrace)
-ENDPROC(c_backtrace)
-
-		.pushsection __ex_table,"a"
-		.align	3
-		.long	1001b, 1006b
-		.long	1002b, 1006b
-		.long	1003b, 1006b
-		.long	1004b, 1006b
-		.popsection
-
-#define instr v4
-#define reg   v5
-#define stack v6
-
-.Ldumpstm:	stm.w	(instr, reg, stack, v7, lr), [sp-]
-		mov	stack, r0
-		mov	instr, r1
-		mov	reg, #14
-		mov	v7, #0
-1:		mov	r3, #1
-		csub.a	reg, #8
-		bne	201f
-		sub	reg, reg, #3
-201:
-		cand.a	instr, r3 << reg
-		beq	2f
-		add	v7, v7, #1
-		cxor.a	v7, #6
-		cmoveq	v7, #1
-		bne	201f
-		adr	r0, .Lcr
-		mov	r1, loglvl
-		b.l	printk
-201:
-		ldw.w	r3, [stack]+, #-4
-		mov	r2, reg
-		csub.a	r2, #8
-		bsl	201f
-		sub	r2, r2, #3
-201:
-		cand.a	instr, #0x40		@ if H is 1, high 16 regs
-		beq	201f
-		add	r2, r2, #0x10		@ so r2 need add 16
-201:
-		adr	r0, .Lfp
-		mov	r1, loglvl
-		b.l	printk
-2:		sub.a	reg, reg, #1
-		bns	1b
-		cxor.a	v7, #0
-		beq	201f
-		adr	r0, .Lcr
-		mov	r1, loglvl
-		b.l	printk
-201:		ldm.w	(instr, reg, stack, v7, pc), [sp]+
-
-.Lfp:		.asciz	"%sr%d:%08x "
-.Lcr:		.asciz	"%s\n"
-.Lbad:		.asciz	"%sBacktrace aborted due to bad frame pointer <%p>\n"
-		.align
-.Ldsi:		.word	0x92eec000 >> 14	@ stm.w sp, (... fp, ip, lr, pc)
-		.word	0x92e10000 >> 14	@ stm.w sp, ()
-
-#endif