Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (262 commits)
  sh: mach-ecovec24: Add user debug switch support
  sh: Kill off unused se_skipped in alignment trap notification code.
  sh: Wire up HAVE_SYSCALL_TRACEPOINTS.
  video: sh_mobile_lcdcfb: use both register sets for display panning
  video: sh_mobile_lcdcfb: implement display panning
  sh: Fix up sh7705 flush_dcache_page() build.
  sh: kfr2r09: document the PLL/FLL <-> RF relationship.
  sh: mach-ecovec24: need asm/clock.h.
  sh: mach-ecovec24: deassert usb irq on boot.
  sh: Add KEYSC support for EcoVec24
  sh: add kycr2_delay for sh_keysc
  sh: cpufreq: Include CPU id in info messages.
  sh: multi-evt support for SH-X3 proto CPU.
  sh: clkfwk: remove bogus set_bus_parent() from SH7709.
  sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300)
  sh: Add EcoVec24 romImage defconfig
  sh: USB disable process is needed if romImage boot for EcoVec24
  sh: EcoVec24: add HIZA setting for LED
  sh: EcoVec24: write MAC address in boot
  sh: Add romImage support for EcoVec24
  ...

1 files changed, 64 insertions, 4 deletions

diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 9f4bc3d90b1e..3759bf853293 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -1,5 +1,65 @@
-ifeq ($(CONFIG_SUPERH32),y)
-include ${srctree}/arch/sh/mm/Makefile_32
-else
-include ${srctree}/arch/sh/mm/Makefile_64
+#
+# Makefile for the Linux SuperH-specific parts of the memory manager.
+#
+
+obj-y			:= cache.o init.o consistent.o mmap.o
+
+cacheops-$(CONFIG_CPU_SH2)		:= cache-sh2.o
+cacheops-$(CONFIG_CPU_SH2A)		:= cache-sh2a.o
+cacheops-$(CONFIG_CPU_SH3)		:= cache-sh3.o
+cacheops-$(CONFIG_CPU_SH4)		:= cache-sh4.o flush-sh4.o
+cacheops-$(CONFIG_CPU_SH5)		:= cache-sh5.o flush-sh4.o
+cacheops-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
+
+obj-y			+= $(cacheops-y)
+
+mmu-y			:= nommu.o extable_32.o
+mmu-$(CONFIG_MMU)	:= extable_$(BITS).o fault_$(BITS).o \
+			   ioremap_$(BITS).o kmap.o tlbflush_$(BITS).o
+
+obj-y			+= $(mmu-y)
+obj-$(CONFIG_DEBUG_FS)	+= asids-debugfs.o
+
+ifdef CONFIG_DEBUG_FS
+obj-$(CONFIG_CPU_SH4)	+= cache-debugfs.o
 endif
+
+ifdef CONFIG_MMU
+tlb-$(CONFIG_CPU_SH3)		:= tlb-sh3.o
+tlb-$(CONFIG_CPU_SH4)		:= tlb-sh4.o
+tlb-$(CONFIG_CPU_SH5)		:= tlb-sh5.o
+tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o
+obj-y				+= $(tlb-y)
+endif
+
+obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
+obj-$(CONFIG_PMB)		+= pmb.o
+obj-$(CONFIG_PMB_FIXED)		+= pmb-fixed.o
+obj-$(CONFIG_NUMA)		+= numa.o
+
+# Special flags for fault_64.o.  This puts restrictions on the number of
+# caller-save registers that the compiler can target when building this file.
+# This is required because the code is called from a context in entry.S where
+# very few registers have been saved in the exception handler (for speed
+# reasons).
+# The caller save registers that have been saved and which can be used are
+# r2,r3,r4,r5 : argument passing
+# r15, r18 : SP and LINK
+# tr0-4 : allow all caller-save TR's.  The compiler seems to be able to make
+#         use of them, so it's probably beneficial to performance to save them
+#         and have them available for it.
+#
+# The resources not listed below are callee save, i.e. the compiler is free to
+# use any of them and will spill them to the stack itself.
+
+CFLAGS_fault_64.o += -ffixed-r7 \
+	-ffixed-r8 -ffixed-r9 -ffixed-r10 -ffixed-r11 -ffixed-r12 \
+	-ffixed-r13 -ffixed-r14 -ffixed-r16 -ffixed-r17 -ffixed-r19 \
+	-ffixed-r20 -ffixed-r21 -ffixed-r22 -ffixed-r23 \
+	-ffixed-r24 -ffixed-r25 -ffixed-r26 -ffixed-r27 \
+	-ffixed-r36 -ffixed-r37 -ffixed-r38 -ffixed-r39 -ffixed-r40 \
+	-ffixed-r41 -ffixed-r42 -ffixed-r43  \
+	-ffixed-r60 -ffixed-r61 -ffixed-r62 \
+	-fomit-frame-pointer
+
+EXTRA_CFLAGS += -Werror