Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (262 commits)
  sh: mach-ecovec24: Add user debug switch support
  sh: Kill off unused se_skipped in alignment trap notification code.
  sh: Wire up HAVE_SYSCALL_TRACEPOINTS.
  video: sh_mobile_lcdcfb: use both register sets for display panning
  video: sh_mobile_lcdcfb: implement display panning
  sh: Fix up sh7705 flush_dcache_page() build.
  sh: kfr2r09: document the PLL/FLL <-> RF relationship.
  sh: mach-ecovec24: need asm/clock.h.
  sh: mach-ecovec24: deassert usb irq on boot.
  sh: Add KEYSC support for EcoVec24
  sh: add kycr2_delay for sh_keysc
  sh: cpufreq: Include CPU id in info messages.
  sh: multi-evt support for SH-X3 proto CPU.
  sh: clkfwk: remove bogus set_bus_parent() from SH7709.
  sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300)
  sh: Add EcoVec24 romImage defconfig
  sh: USB disable process is needed if romImage boot for EcoVec24
  sh: EcoVec24: add HIZA setting for LED
  sh: EcoVec24: write MAC address in boot
  sh: Add romImage support for EcoVec24
  ...

1 files changed, 15 insertions, 27 deletions

diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
index 8c067adf6830..ee3c2aaf66fb 100644
--- a/arch/sh/kernel/cpu/shmobile/pm.c
+++ b/arch/sh/kernel/cpu/shmobile/pm.c
@@ -1,5 +1,5 @@
 /*
- * arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c
+ * arch/sh/kernel/cpu/shmobile/pm.c
  *
  * Power management support code for SuperH Mobile
  *
@@ -32,40 +32,20 @@
  *
  * R-standby mode is unsupported, but will be added in the future
  * U-standby mode is low priority since it needs bootloader hacks
- *
- * All modes should be tied in with cpuidle. But before that can
- * happen we need to keep track of enabled hardware blocks so we
- * can avoid entering sleep modes that stop clocks to hardware
- * blocks that are in use even though the cpu core is idle.
  */
 
+#define ILRAM_BASE 0xe5200000
+
 extern const unsigned char sh_mobile_standby[];
 extern const unsigned int sh_mobile_standby_size;
 
-static void sh_mobile_call_standby(unsigned long mode)
+void sh_mobile_call_standby(unsigned long mode)
 {
-	extern void *vbr_base;
-	void *onchip_mem = (void *)0xe5200000; /* ILRAM */
-	void (*standby_onchip_mem)(unsigned long) = onchip_mem;
-
-	/* Note: Wake up from sleep may generate exceptions!
-	 * Setup VBR to point to on-chip ram if self-refresh is
-	 * going to be used.
-	 */
-	if (mode & SUSP_SH_SF)
-		asm volatile("ldc %0, vbr" : : "r" (onchip_mem) : "memory");
-
-	/* Copy the assembly snippet to the otherwise ununsed ILRAM */
-	memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size);
-	wmb();
-	ctrl_barrier();
+	void *onchip_mem = (void *)ILRAM_BASE;
+	void (*standby_onchip_mem)(unsigned long, unsigned long) = onchip_mem;
 
 	/* Let assembly snippet in on-chip memory handle the rest */
-	standby_onchip_mem(mode);
-
-	/* Put VBR back in System RAM again */
-	if (mode & SUSP_SH_SF)
-		asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
+	standby_onchip_mem(mode, ILRAM_BASE);
 }
 
 static int sh_pm_enter(suspend_state_t state)
@@ -85,7 +65,15 @@ static struct platform_suspend_ops sh_pm_ops = {
 
 static int __init sh_pm_init(void)
 {
+	void *onchip_mem = (void *)ILRAM_BASE;
+
+	/* Copy the assembly snippet to the otherwise ununsed ILRAM */
+	memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size);
+	wmb();
+	ctrl_barrier();
+
 	suspend_set_ops(&sh_pm_ops);
+	sh_mobile_setup_cpuidle();
 	return 0;
 }