sh: remove sh5 support

sh5 never became a product and has probably never really worked.

Remove it by recursively deleting all associated Kconfig options
and all corresponding files.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rich Felker <dalias@libc.org>

2 files changed, 1 insertions, 196 deletions

diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
index 8b91cb96411b..e4578cde46ba 100644
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -2,6 +2,5 @@
 #
 # Makefile for the Linux/SuperH CPU-specific IRQ handlers.
 #
-obj-$(CONFIG_SUPERH32)			+= imask.o
-obj-$(CONFIG_CPU_SH5)			+= intc-sh5.o
+obj-y					+= imask.o
 obj-$(CONFIG_CPU_HAS_IPR_IRQ)		+= ipr.o
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
deleted file mode 100644
index 1b3050facda8..000000000000
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/kernel/cpu/irq/intc-sh5.c
- *
- * Interrupt Controller support for SH5 INTC.
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003  Paul Mundt
- *
- * Per-interrupt selective. IRLM=0 (Fixed priority) is not
- * supported being useless without a cascaded interrupt
- * controller.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-#include <cpu/irq.h>
-#include <asm/page.h>
-
-/*
- * Maybe the generic Peripheral block could move to a more
- * generic include file. INTC Block will be defined here
- * and only here to make INTC self-contained in a single
- * file.
- */
-#define	INTC_BLOCK_OFFSET	0x01000000
-
-/* Base */
-#define INTC_BASE		PHYS_PERIPHERAL_BLOCK + \
-				INTC_BLOCK_OFFSET
-
-/* Address */
-#define INTC_ICR_SET		(intc_virt + 0x0)
-#define INTC_ICR_CLEAR		(intc_virt + 0x8)
-#define INTC_INTPRI_0		(intc_virt + 0x10)
-#define INTC_INTSRC_0		(intc_virt + 0x50)
-#define INTC_INTSRC_1		(intc_virt + 0x58)
-#define INTC_INTREQ_0		(intc_virt + 0x60)
-#define INTC_INTREQ_1		(intc_virt + 0x68)
-#define INTC_INTENB_0		(intc_virt + 0x70)
-#define INTC_INTENB_1		(intc_virt + 0x78)
-#define INTC_INTDSB_0		(intc_virt + 0x80)
-#define INTC_INTDSB_1		(intc_virt + 0x88)
-
-#define INTC_ICR_IRLM		0x1
-#define	INTC_INTPRI_PREGS	8		/* 8 Priority Registers */
-#define	INTC_INTPRI_PPREG	8		/* 8 Priorities per Register */
-
-
-/*
- * Mapper between the vector ordinal and the IRQ number
- * passed to kernel/device drivers.
- */
-int intc_evt_to_irq[(0xE20/0x20)+1] = {
-	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0x000 - 0x0E0 */
-	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0x100 - 0x1E0 */
-	 0,  0,  0,  0,  0,  1,  0,  0,	/* 0x200 - 0x2E0 */
-	 2,  0,  0,  3,  0,  0,  0, -1,	/* 0x300 - 0x3E0 */
-	32, 33, 34, 35, 36, 37, 38, -1,	/* 0x400 - 0x4E0 */
-	-1, -1, -1, 63, -1, -1, -1, -1,	/* 0x500 - 0x5E0 */
-	-1, -1, 18, 19, 20, 21, 22, -1,	/* 0x600 - 0x6E0 */
-	39, 40, 41, 42, -1, -1, -1, -1,	/* 0x700 - 0x7E0 */
-	 4,  5,  6,  7, -1, -1, -1, -1,	/* 0x800 - 0x8E0 */
-	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0x900 - 0x9E0 */
-	12, 13, 14, 15, 16, 17, -1, -1,	/* 0xA00 - 0xAE0 */
-	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0xB00 - 0xBE0 */
-	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0xC00 - 0xCE0 */
-	-1, -1, -1, -1, -1, -1, -1, -1,	/* 0xD00 - 0xDE0 */
-	-1, -1				/* 0xE00 - 0xE20 */
-};
-
-static unsigned long intc_virt;
-static int irlm;		/* IRL mode */
-
-static void enable_intc_irq(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	unsigned long reg;
-	unsigned long bitmask;
-
-	if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY))
-		printk("Trying to use straight IRL0-3 with an encoding platform.\n");
-
-	if (irq < 32) {
-		reg = INTC_INTENB_0;
-		bitmask = 1 << irq;
-	} else {
-		reg = INTC_INTENB_1;
-		bitmask = 1 << (irq - 32);
-	}
-
-	__raw_writel(bitmask, reg);
-}
-
-static void disable_intc_irq(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	unsigned long reg;
-	unsigned long bitmask;
-
-	if (irq < 32) {
-		reg = INTC_INTDSB_0;
-		bitmask = 1 << irq;
-	} else {
-		reg = INTC_INTDSB_1;
-		bitmask = 1 << (irq - 32);
-	}
-
-	__raw_writel(bitmask, reg);
-}
-
-static struct irq_chip intc_irq_type = {
-	.name = "INTC",
-	.irq_enable = enable_intc_irq,
-	.irq_disable = disable_intc_irq,
-};
-
-void __init plat_irq_setup(void)
-{
-	unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
-	unsigned long reg;
-	int i;
-
-	intc_virt = (unsigned long)ioremap(INTC_BASE, 1024);
-	if (!intc_virt) {
-		panic("Unable to remap INTC\n");
-	}
-
-
-	/* Set default: per-line enable/disable, priority driven ack/eoi */
-	for (i = 0; i < NR_INTC_IRQS; i++)
-		irq_set_chip_and_handler(i, &intc_irq_type, handle_level_irq);
-
-
-	/* Disable all interrupts and set all priorities to 0 to avoid trouble */
-	__raw_writel(-1, INTC_INTDSB_0);
-	__raw_writel(-1, INTC_INTDSB_1);
-
-	for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
-		__raw_writel( NO_PRIORITY, reg);
-
-
-#ifdef CONFIG_SH_CAYMAN
-	{
-		unsigned long data;
-
-		/* Set IRLM */
-		/* If all the priorities are set to 'no priority', then
-		 * assume we are using encoded mode.
-		 */
-		irlm = platform_int_priority[IRQ_IRL0] +
-		       platform_int_priority[IRQ_IRL1] +
-		       platform_int_priority[IRQ_IRL2] +
-		       platform_int_priority[IRQ_IRL3];
-		if (irlm == NO_PRIORITY) {
-			/* IRLM = 0 */
-			reg = INTC_ICR_CLEAR;
-			i = IRQ_INTA;
-			printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
-		} else {
-			/* IRLM = 1 */
-			reg = INTC_ICR_SET;
-			i = IRQ_IRL0;
-		}
-		__raw_writel(INTC_ICR_IRLM, reg);
-
-		/* Set interrupt priorities according to platform description */
-		for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
-			data |= platform_int_priority[i] <<
-				((i % INTC_INTPRI_PPREG) * 4);
-			if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
-				/* Upon the 7th, set Priority Register */
-				__raw_writel(data, reg);
-				data = 0;
-				reg += 8;
-			}
-		}
-	}
-#endif
-
-	/*
-	 * And now let interrupts come in.
-	 * sti() is not enough, we need to
-	 * lower priority, too.
-	 */
-        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
-                             "and       %0, %1, %0\n\t"
-                             "putcon    %0, " __SR "\n\t"
-                             : "=&r" (__dummy0)
-                             : "r" (__dummy1));
-}