summaryrefslogtreecommitdiffstats
path: root/arch/sh/Kconfig.debug
diff options
context:
space:
mode:
authorMagnus Damm <damm@opensource.se>2009-12-14 12:52:53 +0000
committerPaul Mundt <lethal@linux-sh.org>2009-12-15 12:07:35 +0900
commite76fe57447e88916954bdcab1c0d2c708ec3c943 (patch)
tree990bd22c068284f2f8b962efceed6a2b10f125fc /arch/sh/Kconfig.debug
parentd8d3fbb0248dd0bc9b961f9ccfad8aa8e6b3ccfe (diff)
downloadlinux-e76fe57447e88916954bdcab1c0d2c708ec3c943.tar.bz2
sh: Remove old early serial console code V2
Now when the sh-sci driver can do early serial output, get rid of the old duplicated code. This patch is V2 and removes support for "earlyprintk=serial" together with the following kconfig options: CONFIG_EARLY_SCIF_CONSOLE CONFIG_EARLY_SCIF_CONSOLE_PORT CONFIG_EARLY_PRINTK With this patch applied "earlyprintk=" support is always built-in the SuperH kernel. For this to work the serial driver must have early platform support and in the case of sh-sci the serial console needs to be enabled: CONFIG_SERIAL_SH_SCI_CONSOLE=y So after enabling the SuperH SCI console kconfig option you also need to point out port using the kernel command line: "earlyprintk=sh-sci.N[,baudrate][,keep]" Remember that clocks may be disabled by the boot loader so you may have to do some board specific static clock setup before earlyprintk will work on your platform. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch/sh/Kconfig.debug')
-rw-r--r--arch/sh/Kconfig.debug44
1 files changed, 0 insertions, 44 deletions
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 55907af1dc25..12fec72fec5f 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -19,50 +19,6 @@ config SH_STANDARD_BIOS
mask ROM and no flash (WindowsCE machines fall in this category).
If unsure, say N.
-config EARLY_SCIF_CONSOLE
- bool "Use early SCIF console"
- help
- This enables an early console using a fixed SCIF port. This can
- be used by platforms that are either not running the SH
- standard BIOS, or do not wish to use the BIOS callbacks for the
- serial I/O.
-
-config EARLY_SCIF_CONSOLE_PORT
- hex
- depends on EARLY_SCIF_CONSOLE
- default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
- default "0xa4430000" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721
- default "0xf8420000" if CPU_SUBTYPE_SH7619
- default "0xff804000" if CPU_SUBTYPE_MXG
- default "0xffc30000" if CPU_SUBTYPE_SHX3
- default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
- CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
- CPU_SUBTYPE_SH7343
- default "0xfe4c0000" if CPU_SUBTYPE_SH7757
- default "0xffeb0000" if CPU_SUBTYPE_SH7785
- default "0xffeb0000" if CPU_SUBTYPE_SH7786
- default "0xfffe8000" if CPU_SUBTYPE_SH7203
- default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
- default "0xffe80000" if CPU_SH4
- default "0xa4000150" if CPU_SH3
- default "0x00000000"
-
-config EARLY_PRINTK
- bool "Early printk support"
- depends on SH_STANDARD_BIOS || EARLY_SCIF_CONSOLE
- help
- Say Y here to redirect kernel printk messages to the serial port
- used by the SH-IPL bootloader, starting very early in the boot
- process and ending when the kernel's serial console is initialised.
- This option is only useful porting the kernel to a new machine,
- when the kernel may crash or hang before the serial console is
- initialised. If unsure, say N.
-
- On devices that are running SH-IPL and want to keep the port
- initialization consistent while not using the BIOS callbacks,
- select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
- the kernel command line option to toggle back and forth.
-
config STACK_DEBUG
bool "Check for stack overflows"
depends on DEBUG_KERNEL && SUPERH32