summaryrefslogtreecommitdiffstats
path: root/arch/s390
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-05-17 16:26:30 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-05-17 16:26:30 -0700
commita7fd20d1c476af4563e66865213474a2f9f473a4 (patch)
treefb1399e2f82842450245fb058a8fb23c52865f43 /arch/s390
parentb80fed9595513384424cd141923c9161c4b5021b (diff)
parent917fa5353da05e8a0045b8acacba8d50400d5b12 (diff)
downloadlinux-a7fd20d1c476af4563e66865213474a2f9f473a4.tar.bz2
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ...
Diffstat (limited to 'arch/s390')
-rw-r--r--arch/s390/Kconfig2
-rw-r--r--arch/s390/net/bpf_jit_comp.c77
2 files changed, 60 insertions, 19 deletions
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index bf24ab188921..a883981c0174 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -126,7 +126,7 @@ config S390
select HAVE_ARCH_SOFT_DIRTY
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
- select HAVE_BPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
+ select HAVE_EBPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
select HAVE_CMPXCHG_DOUBLE
select HAVE_CMPXCHG_LOCAL
select HAVE_DEBUG_KMEMLEAK
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index 3c0bfc1f2694..9133b0ec000b 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -54,16 +54,17 @@ struct bpf_jit {
#define SEEN_FUNC 16 /* calls C functions */
#define SEEN_TAIL_CALL 32 /* code uses tail calls */
#define SEEN_SKB_CHANGE 64 /* code changes skb data */
+#define SEEN_REG_AX 128 /* code uses constant blinding */
#define SEEN_STACK (SEEN_FUNC | SEEN_MEM | SEEN_SKB)
/*
* s390 registers
*/
-#define REG_W0 (__MAX_BPF_REG+0) /* Work register 1 (even) */
-#define REG_W1 (__MAX_BPF_REG+1) /* Work register 2 (odd) */
-#define REG_SKB_DATA (__MAX_BPF_REG+2) /* SKB data register */
-#define REG_L (__MAX_BPF_REG+3) /* Literal pool register */
-#define REG_15 (__MAX_BPF_REG+4) /* Register 15 */
+#define REG_W0 (MAX_BPF_JIT_REG + 0) /* Work register 1 (even) */
+#define REG_W1 (MAX_BPF_JIT_REG + 1) /* Work register 2 (odd) */
+#define REG_SKB_DATA (MAX_BPF_JIT_REG + 2) /* SKB data register */
+#define REG_L (MAX_BPF_JIT_REG + 3) /* Literal pool register */
+#define REG_15 (MAX_BPF_JIT_REG + 4) /* Register 15 */
#define REG_0 REG_W0 /* Register 0 */
#define REG_1 REG_W1 /* Register 1 */
#define REG_2 BPF_REG_1 /* Register 2 */
@@ -88,6 +89,8 @@ static const int reg2hex[] = {
[BPF_REG_9] = 10,
/* BPF stack pointer */
[BPF_REG_FP] = 13,
+ /* Register for blinding (shared with REG_SKB_DATA) */
+ [BPF_REG_AX] = 12,
/* SKB data pointer */
[REG_SKB_DATA] = 12,
/* Work registers for s390x backend */
@@ -385,7 +388,7 @@ static void save_restore_regs(struct bpf_jit *jit, int op)
/*
* For SKB access %b1 contains the SKB pointer. For "bpf_jit.S"
* we store the SKB header length on the stack and the SKB data
- * pointer in REG_SKB_DATA.
+ * pointer in REG_SKB_DATA if BPF_REG_AX is not used.
*/
static void emit_load_skb_data_hlen(struct bpf_jit *jit)
{
@@ -397,9 +400,10 @@ static void emit_load_skb_data_hlen(struct bpf_jit *jit)
offsetof(struct sk_buff, data_len));
/* stg %w1,ST_OFF_HLEN(%r0,%r15) */
EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, REG_15, STK_OFF_HLEN);
- /* lg %skb_data,data_off(%b1) */
- EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0,
- BPF_REG_1, offsetof(struct sk_buff, data));
+ if (!(jit->seen & SEEN_REG_AX))
+ /* lg %skb_data,data_off(%b1) */
+ EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0,
+ BPF_REG_1, offsetof(struct sk_buff, data));
}
/*
@@ -487,6 +491,8 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
s32 imm = insn->imm;
s16 off = insn->off;
+ if (dst_reg == BPF_REG_AX || src_reg == BPF_REG_AX)
+ jit->seen |= SEEN_REG_AX;
switch (insn->code) {
/*
* BPF_MOV
@@ -1188,7 +1194,7 @@ call_fn:
/*
* Implicit input:
* BPF_REG_6 (R7) : skb pointer
- * REG_SKB_DATA (R12): skb data pointer
+ * REG_SKB_DATA (R12): skb data pointer (if no BPF_REG_AX)
*
* Calculated input:
* BPF_REG_2 (R3) : offset of byte(s) to fetch in skb
@@ -1209,6 +1215,11 @@ call_fn:
/* agfr %b2,%src (%src is s32 here) */
EMIT4(0xb9180000, BPF_REG_2, src_reg);
+ /* Reload REG_SKB_DATA if BPF_REG_AX is used */
+ if (jit->seen & SEEN_REG_AX)
+ /* lg %skb_data,data_off(%b6) */
+ EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0,
+ BPF_REG_6, offsetof(struct sk_buff, data));
/* basr %b5,%w1 (%b5 is call saved) */
EMIT2(0x0d00, BPF_REG_5, REG_W1);
@@ -1262,37 +1273,62 @@ void bpf_jit_compile(struct bpf_prog *fp)
/*
* Compile eBPF program "fp"
*/
-void bpf_int_jit_compile(struct bpf_prog *fp)
+struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
{
+ struct bpf_prog *tmp, *orig_fp = fp;
struct bpf_binary_header *header;
+ bool tmp_blinded = false;
struct bpf_jit jit;
int pass;
if (!bpf_jit_enable)
- return;
+ return orig_fp;
+
+ tmp = bpf_jit_blind_constants(fp);
+ /*
+ * If blinding was requested and we failed during blinding,
+ * we must fall back to the interpreter.
+ */
+ if (IS_ERR(tmp))
+ return orig_fp;
+ if (tmp != fp) {
+ tmp_blinded = true;
+ fp = tmp;
+ }
+
memset(&jit, 0, sizeof(jit));
jit.addrs = kcalloc(fp->len + 1, sizeof(*jit.addrs), GFP_KERNEL);
- if (jit.addrs == NULL)
- return;
+ if (jit.addrs == NULL) {
+ fp = orig_fp;
+ goto out;
+ }
/*
* Three initial passes:
* - 1/2: Determine clobbered registers
* - 3: Calculate program size and addrs arrray
*/
for (pass = 1; pass <= 3; pass++) {
- if (bpf_jit_prog(&jit, fp))
+ if (bpf_jit_prog(&jit, fp)) {
+ fp = orig_fp;
goto free_addrs;
+ }
}
/*
* Final pass: Allocate and generate program
*/
- if (jit.size >= BPF_SIZE_MAX)
+ if (jit.size >= BPF_SIZE_MAX) {
+ fp = orig_fp;
goto free_addrs;
+ }
header = bpf_jit_binary_alloc(jit.size, &jit.prg_buf, 2, jit_fill_hole);
- if (!header)
+ if (!header) {
+ fp = orig_fp;
goto free_addrs;
- if (bpf_jit_prog(&jit, fp))
+ }
+ if (bpf_jit_prog(&jit, fp)) {
+ fp = orig_fp;
goto free_addrs;
+ }
if (bpf_jit_enable > 1) {
bpf_jit_dump(fp->len, jit.size, pass, jit.prg_buf);
if (jit.prg_buf)
@@ -1305,6 +1341,11 @@ void bpf_int_jit_compile(struct bpf_prog *fp)
}
free_addrs:
kfree(jit.addrs);
+out:
+ if (tmp_blinded)
+ bpf_jit_prog_release_other(fp, fp == orig_fp ?
+ tmp : orig_fp);
+ return fp;
}
/*