diff options
author | Niklas Schnelle <schnelle@linux.ibm.com> | 2021-09-14 09:26:49 +0200 |
---|---|---|
committer | Vasily Gorbik <gor@linux.ibm.com> | 2021-10-26 15:21:30 +0200 |
commit | 6aefbf1cdf0018c5af53a3fa300a61fef0f046b6 (patch) | |
tree | 139ed883c6e7d3936e959e07ea7e1e47269fd4c2 /arch/s390 | |
parent | 74e74f9cb3dea0372bb317fd5a09c2762567f4f8 (diff) | |
download | linux-6aefbf1cdf0018c5af53a3fa300a61fef0f046b6.tar.bz2 |
s390/pci: add s390_iommu_aperture kernel parameter
Some applications map the same memory area for DMA multiple times while
also mapping significant amounts of memory. With our current DMA code
these applications will run out of DMA addresses after mapping half of
the available memory because the number of DMA mappings is constrained
by the number of concurrently active DMA addresses we support which in
turn is limited by the minimum of hardware constraints and high_memory.
Limiting the number of active DMA addresses to high_memory is only
a heuristic to save memory used by the iommu_bitmap and DMA page tables
however. This was added under the assumption that it rarely makes sense
to DMA map more than system memory.
To accommodate special applications which insist on double mapping, which
works on other platforms, allow specifying a factor of how many times
installed memory is available as DMA address space. Use 0 as a special
value to apply no constraints beyond what hardware dictates at the
expense of significantly more memory use.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Diffstat (limited to 'arch/s390')
-rw-r--r-- | arch/s390/pci/pci_dma.c | 25 |
1 files changed, 23 insertions, 2 deletions
diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c index 93223bd110c3..1f4540d6bd2d 100644 --- a/arch/s390/pci/pci_dma.c +++ b/arch/s390/pci/pci_dma.c @@ -18,6 +18,8 @@ static struct kmem_cache *dma_region_table_cache; static struct kmem_cache *dma_page_table_cache; static int s390_iommu_strict; +static u64 s390_iommu_aperture; +static u32 s390_iommu_aperture_factor = 1; static int zpci_refresh_global(struct zpci_dev *zdev) { @@ -565,15 +567,19 @@ int zpci_dma_init_device(struct zpci_dev *zdev) /* * Restrict the iommu bitmap size to the minimum of the following: - * - main memory size + * - s390_iommu_aperture which defaults to high_memory * - 3-level pagetable address limit minus start_dma offset * - DMA address range allowed by the hardware (clp query pci fn) * * Also set zdev->end_dma to the actual end address of the usable * range, instead of the theoretical maximum as reported by hardware. + * + * This limits the number of concurrently usable DMA mappings since + * for each DMA mapped memory address we need a DMA address including + * extra DMA addresses for multiple mappings of the same memory address. */ zdev->start_dma = PAGE_ALIGN(zdev->start_dma); - zdev->iommu_size = min3((u64) high_memory, + zdev->iommu_size = min3(s390_iommu_aperture, ZPCI_TABLE_SIZE_RT - zdev->start_dma, zdev->end_dma - zdev->start_dma + 1); zdev->end_dma = zdev->start_dma + zdev->iommu_size - 1; @@ -660,6 +666,12 @@ static int __init dma_alloc_cpu_table_caches(void) int __init zpci_dma_init(void) { + s390_iommu_aperture = (u64)high_memory; + if (!s390_iommu_aperture_factor) + s390_iommu_aperture = ULONG_MAX; + else + s390_iommu_aperture *= s390_iommu_aperture_factor; + return dma_alloc_cpu_table_caches(); } @@ -692,3 +704,12 @@ static int __init s390_iommu_setup(char *str) } __setup("s390_iommu=", s390_iommu_setup); + +static int __init s390_iommu_aperture_setup(char *str) +{ + if (kstrtou32(str, 10, &s390_iommu_aperture_factor)) + s390_iommu_aperture_factor = 1; + return 1; +} + +__setup("s390_iommu_aperture=", s390_iommu_aperture_setup); |