diff options
author | Paul Mackerras <paulus@samba.org> | 2008-06-09 14:01:46 +1000 |
---|---|---|
committer | Paul Mackerras <paulus@samba.org> | 2008-06-10 21:40:22 +1000 |
commit | 917f0af9e5a9ceecf9e72537fabb501254ba321d (patch) | |
tree | 1ef207755c6d83ce4af93ef2b5e4645eebd65886 /arch/ppc/kernel/head.S | |
parent | 0f3d6bcd391b058c619fc30e8022e8a29fbf4bef (diff) | |
download | linux-917f0af9e5a9ceecf9e72537fabb501254ba321d.tar.bz2 |
powerpc: Remove arch/ppc and include/asm-ppc
All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.
Acked-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/ppc/kernel/head.S')
-rw-r--r-- | arch/ppc/kernel/head.S | 1220 |
1 files changed, 0 insertions, 1220 deletions
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S deleted file mode 100644 index e7e642b95138..000000000000 --- a/arch/ppc/kernel/head.S +++ /dev/null @@ -1,1220 +0,0 @@ -/* - * PowerPC version - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP - * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> - * Adapted for Power Macintosh by Paul Mackerras. - * Low-level exception handlers and MMU support - * rewritten by Paul Mackerras. - * Copyright (C) 1996 Paul Mackerras. - * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net). - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). - * - * This file contains the low-level support and setup for the - * PowerPC platform, including trap and interrupt dispatch. - * (The PPC 8xx embedded CPUs use head_8xx.S instead.) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/cputable.h> -#include <asm/cache.h> -#include <asm/thread_info.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> - -/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */ -#define LOAD_BAT(n, reg, RA, RB) \ - /* see the comment for clear_bats() -- Cort */ \ - li RA,0; \ - mtspr SPRN_IBAT##n##U,RA; \ - mtspr SPRN_DBAT##n##U,RA; \ - lwz RA,(n*16)+0(reg); \ - lwz RB,(n*16)+4(reg); \ - mtspr SPRN_IBAT##n##U,RA; \ - mtspr SPRN_IBAT##n##L,RB; \ - beq 1f; \ - lwz RA,(n*16)+8(reg); \ - lwz RB,(n*16)+12(reg); \ - mtspr SPRN_DBAT##n##U,RA; \ - mtspr SPRN_DBAT##n##L,RB; \ -1: - - .text - .stabs "arch/ppc/kernel/",N_SO,0,0,0f - .stabs "head.S",N_SO,0,0,0f -0: - .globl _stext -_stext: - -/* - * _start is defined this way because the XCOFF loader in the OpenFirmware - * on the powermac expects the entry point to be a procedure descriptor. - */ - .text - .globl _start -_start: - /* - * These are here for legacy reasons, the kernel used to - * need to look like a coff function entry for the pmac - * but we're always started by some kind of bootloader now. - * -- Cort - */ - nop /* used by __secondary_hold on prep (mtx) and chrp smp */ - nop /* used by __secondary_hold on prep (mtx) and chrp smp */ - nop - -/* PMAC - * Enter here with the kernel text, data and bss loaded starting at - * 0, running with virtual == physical mapping. - * r5 points to the prom entry point (the client interface handler - * address). Address translation is turned on, with the prom - * managing the hash table. Interrupts are disabled. The stack - * pointer (r1) points to just below the end of the half-meg region - * from 0x380000 - 0x400000, which is mapped in already. - * - * If we are booted from MacOS via BootX, we enter with the kernel - * image loaded somewhere, and the following values in registers: - * r3: 'BooX' (0x426f6f58) - * r4: virtual address of boot_infos_t - * r5: 0 - * - * APUS - * r3: 'APUS' - * r4: physical address of memory base - * Linux/m68k style BootInfo structure at &_end. - * - * PREP - * This is jumped to on prep systems right after the kernel is relocated - * to its proper place in memory by the boot loader. The expected layout - * of the regs is: - * r3: ptr to residual data - * r4: initrd_start or if no initrd then 0 - * r5: initrd_end - unused if r4 is 0 - * r6: Start of command line string - * r7: End of command line string - * - * This just gets a minimal mmu environment setup so we can call - * start_here() to do the real work. - * -- Cort - */ - - .globl __start -__start: - mr r31,r3 /* save parameters */ - mr r30,r4 - mr r29,r5 - mr r28,r6 - mr r27,r7 - li r24,0 /* cpu # */ - -/* - * early_init() does the early machine identification and does - * the necessary low-level setup and clears the BSS - * -- Cort <cort@fsmlabs.com> - */ - bl early_init - -/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains - * the physical address we are running at, returned by early_init() - */ - bl mmu_off -__after_mmu_off: - bl clear_bats - bl flush_tlbs - - bl initial_bats -#ifdef CONFIG_BOOTX_TEXT - bl setup_disp_bat -#endif - -/* - * Call setup_cpu for CPU 0 and initialize 6xx Idle - */ - bl reloc_offset - li r24,0 /* cpu# */ - bl call_setup_cpu /* Call setup_cpu for this CPU */ -#ifdef CONFIG_6xx - bl reloc_offset - bl init_idle_6xx -#endif /* CONFIG_6xx */ - - -/* - * We need to run with _start at physical address 0. - * If the MMU is already turned on, we copy stuff to KERNELBASE, - * otherwise we copy it to 0. - */ - bl reloc_offset - mr r26,r3 - addis r4,r3,KERNELBASE@h /* current address of _start */ - cmpwi 0,r4,0 /* are we already running at 0? */ - bne relocate_kernel - -/* - * we now have the 1st 16M of ram mapped with the bats. - * prep needs the mmu to be turned on here, but pmac already has it on. - * this shouldn't bother the pmac since it just gets turned on again - * as we jump to our code at KERNELBASE. -- Cort - * Actually no, pmac doesn't have it on any more. BootX enters with MMU - * off, and in other cases, we now turn it off before changing BATs above. - */ -turn_on_mmu: - mfmsr r0 - ori r0,r0,MSR_DR|MSR_IR - mtspr SPRN_SRR1,r0 - lis r0,start_here@h - ori r0,r0,start_here@l - mtspr SPRN_SRR0,r0 - SYNC - RFI /* enables MMU */ - -/* - * We need __secondary_hold as a place to hold the other cpus on - * an SMP machine, even when we are running a UP kernel. - */ - . = 0xc0 /* for prep bootloader */ - li r3,1 /* MTX only has 1 cpu */ - .globl __secondary_hold -__secondary_hold: - /* tell the master we're here */ - stw r3,4(0) -#ifdef CONFIG_SMP -100: lwz r4,0(0) - /* wait until we're told to start */ - cmpw 0,r4,r3 - bne 100b - /* our cpu # was at addr 0 - go */ - mr r24,r3 /* cpu # */ - b __secondary_start -#else - b . -#endif /* CONFIG_SMP */ - -/* - * Exception entry code. This code runs with address translation - * turned off, i.e. using physical addresses. - * We assume sprg3 has the physical address of the current - * task's thread_struct. - */ -#define EXCEPTION_PROLOG \ - mtspr SPRN_SPRG0,r10; \ - mtspr SPRN_SPRG1,r11; \ - mfcr r10; \ - EXCEPTION_PROLOG_1; \ - EXCEPTION_PROLOG_2 - -#define EXCEPTION_PROLOG_1 \ - mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \ - andi. r11,r11,MSR_PR; \ - tophys(r11,r1); /* use tophys(r1) if kernel */ \ - beq 1f; \ - mfspr r11,SPRN_SPRG3; \ - lwz r11,THREAD_INFO-THREAD(r11); \ - addi r11,r11,THREAD_SIZE; \ - tophys(r11,r11); \ -1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */ - - -#define EXCEPTION_PROLOG_2 \ - CLR_TOP32(r11); \ - stw r10,_CCR(r11); /* save registers */ \ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG0; \ - stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG1; \ - stw r12,GPR11(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r12,SPRN_SRR0; \ - mfspr r9,SPRN_SRR1; \ - stw r1,GPR1(r11); \ - stw r1,0(r11); \ - tovirt(r1,r11); /* set new kernel sp */ \ - li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \ - MTMSRD(r10); /* (except for mach check in rtas) */ \ - stw r0,GPR0(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) - -/* - * Note: code which follows this uses cr0.eq (set if from kernel), - * r11, r12 (SRR0), and r9 (SRR1). - * - * Note2: once we have set r1 we are in a position to take exceptions - * again, and we could thus set MSR:RI at that point. - */ - -/* - * Exception vectors. - */ -#define EXCEPTION(n, label, hdlr, xfer) \ - . = n; \ -label: \ - EXCEPTION_PROLOG; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - xfer(n, hdlr) - -#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \ - li r10,trap; \ - stw r10,TRAP(r11); \ - li r10,MSR_KERNEL; \ - copyee(r10, r9); \ - bl tfer; \ -i##n: \ - .long hdlr; \ - .long ret - -#define COPY_EE(d, s) rlwimi d,s,0,16,16 -#define NOCOPY(d, s) - -#define EXC_XFER_STD(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \ - ret_from_except) - -#define EXC_XFER_EE(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_EE_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \ - ret_from_except) - -/* System reset */ -/* core99 pmac starts the seconary here by changing the vector, and - putting it back to what it was (unknown_exception) when done. */ - EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD) - -/* Machine check */ - . = 0x200 - mtspr SPRN_SPRG0,r10 - mtspr SPRN_SPRG1,r11 - mfcr r10 - EXCEPTION_PROLOG_1 -7: EXCEPTION_PROLOG_2 - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_STD(0x200, machine_check_exception) - -/* Data access exception. */ - . = 0x300 -DataAccess: - EXCEPTION_PROLOG - mfspr r10,SPRN_DSISR - andis. r0,r10,0xa470 /* weird error? */ - bne 1f /* if not, try to put a PTE */ - mfspr r4,SPRN_DAR /* into the hash table */ - rlwinm r3,r10,32-15,21,21 /* DSISR_STORE -> _PAGE_RW */ - bl hash_page -1: stw r10,_DSISR(r11) - mr r5,r10 - mfspr r4,SPRN_DAR - EXC_XFER_EE_LITE(0x300, handle_page_fault) - -/* Instruction access exception. */ - . = 0x400 -InstructionAccess: - EXCEPTION_PROLOG - andis. r0,r9,0x4000 /* no pte found? */ - beq 1f /* if so, try to put a PTE */ - li r3,0 /* into the hash table */ - mr r4,r12 /* SRR0 is fault address */ - bl hash_page -1: mr r4,r12 - mr r5,r9 - EXC_XFER_EE_LITE(0x400, handle_page_fault) - -/* External interrupt */ - EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) - -/* Alignment exception */ - . = 0x600 -Alignment: - EXCEPTION_PROLOG - mfspr r4,SPRN_DAR - stw r4,_DAR(r11) - mfspr r5,SPRN_DSISR - stw r5,_DSISR(r11) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_EE(0x600, alignment_exception) - -/* Program check exception */ - EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD) - -/* Floating-point unavailable */ - . = 0x800 -FPUnavailable: - EXCEPTION_PROLOG - bne load_up_fpu /* if from user, just load it up */ - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception) - -/* Decrementer */ - EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE) - - EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE) - EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE) - -/* System call */ - . = 0xc00 -SystemCall: - EXCEPTION_PROLOG - EXC_XFER_EE_LITE(0xc00, DoSyscall) - -/* Single step - not used on 601 */ - EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD) - EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE) - -/* - * The Altivec unavailable trap is at 0x0f20. Foo. - * We effectively remap it to 0x3000. - * We include an altivec unavailable exception vector even if - * not configured for Altivec, so that you can't panic a - * non-altivec kernel running on a machine with altivec just - * by executing an altivec instruction. - */ - . = 0xf00 - b Trap_0f - - . = 0xf20 - b AltiVecUnavailable - -Trap_0f: - EXCEPTION_PROLOG - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_EE(0xf00, unknown_exception) - -/* - * Handle TLB miss for instruction on 603/603e. - * Note: we get an alternate set of r0 - r3 to use automatically. - */ - . = 0x1000 -InstructionTLBMiss: -/* - * r0: stored ctr - * r1: linux style pte ( later becomes ppc hardware pte ) - * r2: ptr to linux-style pte - * r3: scratch - */ - mfctr r0 - /* Get PTE (linux-style) and check access */ - mfspr r3,SPRN_IMISS - lis r1,KERNELBASE@h /* check if kernel address */ - cmplw 0,r3,r1 - mfspr r2,SPRN_SPRG3 - li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */ - lwz r2,PGDIR(r2) - blt+ 112f - lis r2,swapper_pg_dir@ha /* if kernel address, use */ - addi r2,r2,swapper_pg_dir@l /* kernel page table */ - mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */ - rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */ -112: tophys(r2,r2) - rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */ - lwz r2,0(r2) /* get pmd entry */ - rlwinm. r2,r2,0,0,19 /* extract address of pte page */ - beq- InstructionAddressInvalid /* return if no mapping */ - rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */ - lwz r3,0(r2) /* get linux-style pte */ - andc. r1,r1,r3 /* check access & ~permission */ - bne- InstructionAddressInvalid /* return if access not permitted */ - ori r3,r3,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */ - /* - * NOTE! We are assuming this is not an SMP system, otherwise - * we would need to update the pte atomically with lwarx/stwcx. - */ - stw r3,0(r2) /* update PTE (accessed bit) */ - /* Convert linux-style PTE to low word of PPC-style PTE */ - rlwinm r1,r3,32-10,31,31 /* _PAGE_RW -> PP lsb */ - rlwinm r2,r3,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */ - and r1,r1,r2 /* writable if _RW and _DIRTY */ - rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */ - rlwimi r3,r3,32-1,31,31 /* _PAGE_USER -> PP lsb */ - ori r1,r1,0xe14 /* clear out reserved bits and M */ - andc r1,r3,r1 /* PP = user? (rw&dirty? 2: 3): 0 */ - mtspr SPRN_RPA,r1 - mfspr r3,SPRN_IMISS - tlbli r3 - mfspr r3,SPRN_SRR1 /* Need to restore CR0 */ - mtcrf 0x80,r3 - rfi -InstructionAddressInvalid: - mfspr r3,SPRN_SRR1 - rlwinm r1,r3,9,6,6 /* Get load/store bit */ - - addis r1,r1,0x2000 - mtspr SPRN_DSISR,r1 /* (shouldn't be needed) */ - mtctr r0 /* Restore CTR */ - andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */ - or r2,r2,r1 - mtspr SPRN_SRR1,r2 - mfspr r1,SPRN_IMISS /* Get failing address */ - rlwinm. r2,r2,0,31,31 /* Check for little endian access */ - rlwimi r2,r2,1,30,30 /* change 1 -> 3 */ - xor r1,r1,r2 - mtspr SPRN_DAR,r1 /* Set fault address */ - mfmsr r0 /* Restore "normal" registers */ - xoris r0,r0,MSR_TGPR>>16 - mtcrf 0x80,r3 /* Restore CR0 */ - mtmsr r0 - b InstructionAccess - -/* - * Handle TLB miss for DATA Load operation on 603/603e - */ - . = 0x1100 -DataLoadTLBMiss: -/* - * r0: stored ctr - * r1: linux style pte ( later becomes ppc hardware pte ) - * r2: ptr to linux-style pte - * r3: scratch - */ - mfctr r0 - /* Get PTE (linux-style) and check access */ - mfspr r3,SPRN_DMISS - lis r1,KERNELBASE@h /* check if kernel address */ - cmplw 0,r3,r1 - mfspr r2,SPRN_SPRG3 - li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */ - lwz r2,PGDIR(r2) - blt+ 112f - lis r2,swapper_pg_dir@ha /* if kernel address, use */ - addi r2,r2,swapper_pg_dir@l /* kernel page table */ - mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */ - rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */ -112: tophys(r2,r2) - rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */ - lwz r2,0(r2) /* get pmd entry */ - rlwinm. r2,r2,0,0,19 /* extract address of pte page */ - beq- DataAddressInvalid /* return if no mapping */ - rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */ - lwz r3,0(r2) /* get linux-style pte */ - andc. r1,r1,r3 /* check access & ~permission */ - bne- DataAddressInvalid /* return if access not permitted */ - ori r3,r3,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */ - /* - * NOTE! We are assuming this is not an SMP system, otherwise - * we would need to update the pte atomically with lwarx/stwcx. - */ - stw r3,0(r2) /* update PTE (accessed bit) */ - /* Convert linux-style PTE to low word of PPC-style PTE */ - rlwinm r1,r3,32-10,31,31 /* _PAGE_RW -> PP lsb */ - rlwinm r2,r3,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */ - and r1,r1,r2 /* writable if _RW and _DIRTY */ - rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */ - rlwimi r3,r3,32-1,31,31 /* _PAGE_USER -> PP lsb */ - ori r1,r1,0xe14 /* clear out reserved bits and M */ - andc r1,r3,r1 /* PP = user? (rw&dirty? 2: 3): 0 */ - mtspr SPRN_RPA,r1 - mfspr r3,SPRN_DMISS - tlbld r3 - mfspr r3,SPRN_SRR1 /* Need to restore CR0 */ - mtcrf 0x80,r3 - rfi -DataAddressInvalid: - mfspr r3,SPRN_SRR1 - rlwinm r1,r3,9,6,6 /* Get load/store bit */ - addis r1,r1,0x2000 - mtspr SPRN_DSISR,r1 - mtctr r0 /* Restore CTR */ - andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */ - mtspr SPRN_SRR1,r2 - mfspr r1,SPRN_DMISS /* Get failing address */ - rlwinm. r2,r2,0,31,31 /* Check for little endian access */ - beq 20f /* Jump if big endian */ - xori r1,r1,3 -20: mtspr SPRN_DAR,r1 /* Set fault address */ - mfmsr r0 /* Restore "normal" registers */ - xoris r0,r0,MSR_TGPR>>16 - mtcrf 0x80,r3 /* Restore CR0 */ - mtmsr r0 - b DataAccess - -/* - * Handle TLB miss for DATA Store on 603/603e - */ - . = 0x1200 -DataStoreTLBMiss: -/* - * r0: stored ctr - * r1: linux style pte ( later becomes ppc hardware pte ) - * r2: ptr to linux-style pte - * r3: scratch - */ - mfctr r0 - /* Get PTE (linux-style) and check access */ - mfspr r3,SPRN_DMISS - lis r1,KERNELBASE@h /* check if kernel address */ - cmplw 0,r3,r1 - mfspr r2,SPRN_SPRG3 - li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */ - lwz r2,PGDIR(r2) - blt+ 112f - lis r2,swapper_pg_dir@ha /* if kernel address, use */ - addi r2,r2,swapper_pg_dir@l /* kernel page table */ - mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */ - rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */ -112: tophys(r2,r2) - rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */ - lwz r2,0(r2) /* get pmd entry */ - rlwinm. r2,r2,0,0,19 /* extract address of pte page */ - beq- DataAddressInvalid /* return if no mapping */ - rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */ - lwz r3,0(r2) /* get linux-style pte */ - andc. r1,r1,r3 /* check access & ~permission */ - bne- DataAddressInvalid /* return if access not permitted */ - ori r3,r3,_PAGE_ACCESSED|_PAGE_DIRTY - /* - * NOTE! We are assuming this is not an SMP system, otherwise - * we would need to update the pte atomically with lwarx/stwcx. - */ - stw r3,0(r2) /* update PTE (accessed/dirty bits) */ - /* Convert linux-style PTE to low word of PPC-style PTE */ - rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */ - li r1,0xe15 /* clear out reserved bits and M */ - andc r1,r3,r1 /* PP = user? 2: 0 */ - mtspr SPRN_RPA,r1 - mfspr r3,SPRN_DMISS - tlbld r3 - mfspr r3,SPRN_SRR1 /* Need to restore CR0 */ - mtcrf 0x80,r3 - rfi - -#ifndef CONFIG_ALTIVEC -#define altivec_assist_exception unknown_exception -#endif - - EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE) - EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE) - EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE) - EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD) - EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_EE) - EXCEPTION(0x2100, Trap_21, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2200, Trap_22, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2300, Trap_23, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2400, Trap_24, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2500, Trap_25, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2600, Trap_26, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2700, Trap_27, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2800, Trap_28, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2900, Trap_29, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2a00, Trap_2a, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2b00, Trap_2b, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2c00, Trap_2c, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2d00, Trap_2d, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2e00, Trap_2e, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x2f00, MOLTrampoline, unknown_exception, EXC_XFER_EE_LITE) - - .globl mol_trampoline - .set mol_trampoline, i0x2f00 - - . = 0x3000 - -AltiVecUnavailable: - EXCEPTION_PROLOG -#ifdef CONFIG_ALTIVEC - bne load_up_altivec /* if from user, just load it up */ -#endif /* CONFIG_ALTIVEC */ - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception) - -#ifdef CONFIG_ALTIVEC -/* Note that the AltiVec support is closely modeled after the FP - * support. Changes to one are likely to be applicable to the - * other! */ -load_up_altivec: -/* - * Disable AltiVec for the task which had AltiVec previously, - * and save its AltiVec registers in its thread_struct. - * Enables AltiVec for use in the kernel on return. - * On SMP we know the AltiVec units are free, since we give it up every - * switch. -- Kumar - */ - mfmsr r5 - oris r5,r5,MSR_VEC@h - MTMSRD(r5) /* enable use of AltiVec now */ - isync -/* - * For SMP, we don't do lazy AltiVec switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_altivec in switch_to. - */ -#ifndef CONFIG_SMP - tophys(r6,0) - addis r3,r6,last_task_used_altivec@ha - lwz r4,last_task_used_altivec@l(r3) - cmpwi 0,r4,0 - beq 1f - add r4,r4,r6 - addi r4,r4,THREAD /* want THREAD of last_task_used_altivec */ - SAVE_32VRS(0,r10,r4) - mfvscr vr0 - li r10,THREAD_VSCR - stvx vr0,r10,r4 - lwz r5,PT_REGS(r4) - add r5,r5,r6 - lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r10,MSR_VEC@h - andc r4,r4,r10 /* disable altivec for previous task */ - stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* enable use of AltiVec after return */ - oris r9,r9,MSR_VEC@h - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ - li r4,1 - li r10,THREAD_VSCR - stw r4,THREAD_USED_VR(r5) - lvx vr0,r10,r5 - mtvscr vr0 - REST_32VRS(0,r10,r5) -#ifndef CONFIG_SMP - subi r4,r5,THREAD - sub r4,r4,r6 - stw r4,last_task_used_altivec@l(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - /* we haven't used ctr or xer or lr */ - b fast_exception_return - -/* - * giveup_altivec(tsk) - * Disable AltiVec for the task given as the argument, - * and save the AltiVec registers in its thread_struct. - * Enables AltiVec for use in the kernel on return. - */ - - .globl giveup_altivec -giveup_altivec: - mfmsr r5 - oris r5,r5,MSR_VEC@h - SYNC - MTMSRD(r5) /* enable use of AltiVec now */ - isync - cmpwi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - lwz r5,PT_REGS(r3) - cmpwi 0,r5,0 - SAVE_32VRS(0, r4, r3) - mfvscr vr0 - li r4,THREAD_VSCR - stvx vr0,r4,r3 - beq 1f - lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_VEC@h - andc r4,r4,r3 /* disable AltiVec for previous task */ - stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - lis r4,last_task_used_altivec@ha - stw r5,last_task_used_altivec@l(r4) -#endif /* CONFIG_SMP */ - blr -#endif /* CONFIG_ALTIVEC */ - -/* - * This code is jumped to from the startup code to copy - * the kernel image to physical address 0. - */ -relocate_kernel: - addis r9,r26,klimit@ha /* fetch klimit */ - lwz r25,klimit@l(r9) - addis r25,r25,-KERNELBASE@h - li r3,0 /* Destination base address */ - li r6,0 /* Destination offset */ - li r5,0x4000 /* # bytes of memory to copy */ - bl copy_and_flush /* copy the first 0x4000 bytes */ - addi r0,r3,4f@l /* jump to the address of 4f */ - mtctr r0 /* in copy and do the rest. */ - bctr /* jump to the copy */ -4: mr r5,r25 - bl copy_and_flush /* copy the rest */ - b turn_on_mmu - -/* - * Copy routine used to copy the kernel to start at physical address 0 - * and flush and invalidate the caches as needed. - * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset - * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5. - */ -copy_and_flush: - addi r5,r5,-4 - addi r6,r6,-4 -4: li r0,L1_CACHE_BYTES/4 - mtctr r0 -3: addi r6,r6,4 /* copy a cache line */ - lwzx r0,r6,r4 - stwx r0,r6,r3 - bdnz 3b - dcbst r6,r3 /* write it to memory */ - sync - icbi r6,r3 /* flush the icache line */ - cmplw 0,r6,r5 - blt 4b - sync /* additional sync needed on g4 */ - isync - addi r5,r5,4 - addi r6,r6,4 - blr - -#ifdef CONFIG_SMP - .globl __secondary_start_pmac_0 -__secondary_start_pmac_0: - /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */ - li r24,0 - b 1f - li r24,1 - b 1f - li r24,2 - b 1f - li r24,3 -1: - /* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0 - set to map the 0xf0000000 - 0xffffffff region */ - mfmsr r0 - rlwinm r0,r0,0,28,26 /* clear DR (0x10) */ - SYNC - mtmsr r0 - isync - - .globl __secondary_start -__secondary_start: - /* Copy some CPU settings from CPU 0 */ - bl __restore_cpu_setup - - lis r3,-KERNELBASE@h - mr r4,r24 - bl call_setup_cpu /* Call setup_cpu for this CPU */ -#ifdef CONFIG_6xx - lis r3,-KERNELBASE@h - bl init_idle_6xx -#endif /* CONFIG_6xx */ - - /* get current_thread_info and current */ - lis r1,secondary_ti@ha - tophys(r1,r1) - lwz r1,secondary_ti@l(r1) - tophys(r2,r1) - lwz r2,TI_TASK(r2) - - /* stack */ - addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD - li r0,0 - tophys(r3,r1) - stw r0,0(r3) - - /* load up the MMU */ - bl load_up_mmu - - /* ptr to phys current thread */ - tophys(r4,r2) - addi r4,r4,THREAD /* phys address of our thread_struct */ - CLR_TOP32(r4) - mtspr SPRN_SPRG3,r4 - li r3,0 - mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */ - - /* enable MMU and jump to start_secondary */ - li r4,MSR_KERNEL - FIX_SRR1(r4,r5) - lis r3,start_secondary@h - ori r3,r3,start_secondary@l - mtspr SPRN_SRR0,r3 - mtspr SPRN_SRR1,r4 - SYNC - RFI -#endif /* CONFIG_SMP */ - -/* - * Those generic dummy functions are kept for CPUs not - * included in CONFIG_6xx - */ -#if !defined(CONFIG_6xx) -_GLOBAL(__save_cpu_setup) - blr -_GLOBAL(__restore_cpu_setup) - blr -#endif /* !defined(CONFIG_6xx) */ - - -/* - * Load stuff into the MMU. Intended to be called with - * IR=0 and DR=0. - */ -load_up_mmu: - sync /* Force all PTE updates to finish */ - isync - tlbia /* Clear all TLB entries */ - sync /* wait for tlbia/tlbie to finish */ - TLBSYNC /* ... on all CPUs */ - /* Load the SDR1 register (hash table base & size) */ - lis r6,_SDR1@ha - tophys(r6,r6) - lwz r6,_SDR1@l(r6) - mtspr SPRN_SDR1,r6 - li r0,16 /* load up segment register values */ - mtctr r0 /* for context 0 */ - lis r3,0x2000 /* Ku = 1, VSID = 0 */ - li r4,0 -3: mtsrin r3,r4 - addi r3,r3,0x111 /* increment VSID */ - addis r4,r4,0x1000 /* address of next segment */ - bdnz 3b - -/* Load the BAT registers with the values set up by MMU_init. - MMU_init takes care of whether we're on a 601 or not. */ - mfpvr r3 - srwi r3,r3,16 - cmpwi r3,1 - lis r3,BATS@ha - addi r3,r3,BATS@l - tophys(r3,r3) - LOAD_BAT(0,r3,r4,r5) - LOAD_BAT(1,r3,r4,r5) - LOAD_BAT(2,r3,r4,r5) - LOAD_BAT(3,r3,r4,r5) - - blr - -/* - * This is where the main kernel code starts. - */ -start_here: - /* ptr to current */ - lis r2,init_task@h - ori r2,r2,init_task@l - /* Set up for using our exception vectors */ - /* ptr to phys current thread */ - tophys(r4,r2) - addi r4,r4,THREAD /* init task's THREAD */ - CLR_TOP32(r4) - mtspr SPRN_SPRG3,r4 - li r3,0 - mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */ - - /* stack */ - lis r1,init_thread_union@ha - addi r1,r1,init_thread_union@l - li r0,0 - stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) -/* - * Do early bootinfo parsing, platform-specific initialization, - * and set up the MMU. - */ - mr r3,r31 - mr r4,r30 - mr r5,r29 - mr r6,r28 - mr r7,r27 - bl machine_init - bl MMU_init - -/* - * Go back to running unmapped so we can load up new values - * for SDR1 (hash table pointer) and the segment registers - * and change to using our exception vectors. - */ - lis r4,2f@h - ori r4,r4,2f@l - tophys(r4,r4) - li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR) - FIX_SRR1(r3,r5) - mtspr SPRN_SRR0,r4 - mtspr SPRN_SRR1,r3 - SYNC - RFI -/* Load up the kernel context */ -2: bl load_up_mmu - -#ifdef CONFIG_BDI_SWITCH - /* Add helper information for the Abatron bdiGDB debugger. - * We do this here because we know the mmu is disabled, and - * will be enabled for real in just a few instructions. - */ - lis r5, abatron_pteptrs@h - ori r5, r5, abatron_pteptrs@l - stw r5, 0xf0(r0) /* This much match your Abatron config */ - lis r6, swapper_pg_dir@h - ori r6, r6, swapper_pg_dir@l - tophys(r5, r5) - stw r6, 0(r5) -#endif /* CONFIG_BDI_SWITCH */ - -/* Now turn on the MMU for real! */ - li r4,MSR_KERNEL - FIX_SRR1(r4,r5) - lis r3,start_kernel@h - ori r3,r3,start_kernel@l - mtspr SPRN_SRR0,r3 - mtspr SPRN_SRR1,r4 - SYNC - RFI - -/* - * Set up the segment registers for a new context. - */ -_GLOBAL(set_context) - mulli r3,r3,897 /* multiply context by skew factor */ - rlwinm r3,r3,4,8,27 /* VSID = (context & 0xfffff) << 4 */ - addis r3,r3,0x6000 /* Set Ks, Ku bits */ - li r0,NUM_USER_SEGMENTS - mtctr r0 - -#ifdef CONFIG_BDI_SWITCH - /* Context switch the PTE pointer for the Abatron BDI2000. - * The PGDIR is passed as second argument. - */ - lis r5, KERNELBASE@h - lwz r5, 0xf0(r5) - stw r4, 0x4(r5) -#endif - li r4,0 - isync -3: - mtsrin r3,r4 - addi r3,r3,0x111 /* next VSID */ - rlwinm r3,r3,0,8,3 /* clear out any overflow from VSID field */ - addis r4,r4,0x1000 /* address of next segment */ - bdnz 3b - sync - isync - blr - -/* - * An undocumented "feature" of 604e requires that the v bit - * be cleared before changing BAT values. - * - * Also, newer IBM firmware does not clear bat3 and 4 so - * this makes sure it's done. - * -- Cort - */ -clear_bats: - li r10,0 - mfspr r9,SPRN_PVR - rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */ - cmpwi r9, 1 - beq 1f - - mtspr SPRN_DBAT0U,r10 - mtspr SPRN_DBAT0L,r10 - mtspr SPRN_DBAT1U,r10 - mtspr SPRN_DBAT1L,r10 - mtspr SPRN_DBAT2U,r10 - mtspr SPRN_DBAT2L,r10 - mtspr SPRN_DBAT3U,r10 - mtspr SPRN_DBAT3L,r10 -1: - mtspr SPRN_IBAT0U,r10 - mtspr SPRN_IBAT0L,r10 - mtspr SPRN_IBAT1U,r10 - mtspr SPRN_IBAT1L,r10 - mtspr SPRN_IBAT2U,r10 - mtspr SPRN_IBAT2L,r10 - mtspr SPRN_IBAT3U,r10 - mtspr SPRN_IBAT3L,r10 -BEGIN_FTR_SECTION - /* Here's a tweak: at this point, CPU setup have - * not been called yet, so HIGH_BAT_EN may not be - * set in HID0 for the 745x processors. However, it - * seems that doesn't affect our ability to actually - * write to these SPRs. - */ - mtspr SPRN_DBAT4U,r10 - mtspr SPRN_DBAT4L,r10 - mtspr SPRN_DBAT5U,r10 - mtspr SPRN_DBAT5L,r10 - mtspr SPRN_DBAT6U,r10 - mtspr SPRN_DBAT6L,r10 - mtspr SPRN_DBAT7U,r10 - mtspr SPRN_DBAT7L,r10 - mtspr SPRN_IBAT4U,r10 - mtspr SPRN_IBAT4L,r10 - mtspr SPRN_IBAT5U,r10 - mtspr SPRN_IBAT5L,r10 - mtspr SPRN_IBAT6U,r10 - mtspr SPRN_IBAT6L,r10 - mtspr SPRN_IBAT7U,r10 - mtspr SPRN_IBAT7L,r10 -END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS) - blr - -flush_tlbs: - lis r10, 0x40 -1: addic. r10, r10, -0x1000 - tlbie r10 - blt 1b - sync - blr - -mmu_off: - addi r4, r3, __after_mmu_off - _start - mfmsr r3 - andi. r0,r3,MSR_DR|MSR_IR /* MMU enabled? */ - beqlr - andc r3,r3,r0 - mtspr SPRN_SRR0,r4 - mtspr SPRN_SRR1,r3 - sync - RFI - -/* - * Use the first pair of BAT registers to map the 1st 16MB - * of RAM to KERNELBASE. From this point on we can't safely - * call OF any more. - */ -initial_bats: - lis r11,KERNELBASE@h - mfspr r9,SPRN_PVR - rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */ - cmpwi 0,r9,1 - bne 4f - ori r11,r11,4 /* set up BAT registers for 601 */ - li r8,0x7f /* valid, block length = 8MB */ - oris r9,r11,0x800000@h /* set up BAT reg for 2nd 8M */ - oris r10,r8,0x800000@h /* set up BAT reg for 2nd 8M */ - mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */ - mtspr SPRN_IBAT0L,r8 /* lower BAT register */ - mtspr SPRN_IBAT1U,r9 - mtspr SPRN_IBAT1L,r10 - isync - blr - -4: tophys(r8,r11) -#ifdef CONFIG_SMP - ori r8,r8,0x12 /* R/W access, M=1 */ -#else - ori r8,r8,2 /* R/W access */ -#endif /* CONFIG_SMP */ - ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */ - - mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */ - mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */ - mtspr SPRN_IBAT0L,r8 - mtspr SPRN_IBAT0U,r11 - isync - blr - -#ifdef CONFIG_BOOTX_TEXT -setup_disp_bat: - /* - * setup the display bat prepared for us in prom.c - */ - mflr r8 - bl reloc_offset - mtlr r8 - addis r8,r3,disp_BAT@ha - addi r8,r8,disp_BAT@l - lwz r11,0(r8) - lwz r8,4(r8) - mfspr r9,SPRN_PVR - rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */ - cmpwi 0,r9,1 - beq 1f - mtspr SPRN_DBAT3L,r8 - mtspr SPRN_DBAT3U,r11 - blr -1: mtspr SPRN_IBAT3L,r8 - mtspr SPRN_IBAT3U,r11 - blr - -#endif /* defined(CONFIG_BOOTX_TEXT) */ - -#ifdef CONFIG_8260 -/* Jump into the system reset for the rom. - * We first disable the MMU, and then jump to the ROM reset address. - * - * r3 is the board info structure, r4 is the location for starting. - * I use this for building a small kernel that can load other kernels, - * rather than trying to write or rely on a rom monitor that can tftp load. - */ - .globl m8260_gorom -m8260_gorom: - mfmsr r0 - rlwinm r0,r0,0,17,15 /* clear MSR_EE in r0 */ - sync - mtmsr r0 - sync - mfspr r11, SPRN_HID0 - lis r10, 0 - ori r10,r10,HID0_ICE|HID0_DCE - andc r11, r11, r10 - mtspr SPRN_HID0, r11 - isync - li r5, MSR_ME|MSR_RI - lis r6,2f@h - addis r6,r6,-KERNELBASE@h - ori r6,r6,2f@l - mtspr SPRN_SRR0,r6 - mtspr SPRN_SRR1,r5 - isync - sync - rfi -2: - mtlr r4 - blr -#endif - - -/* - * We put a few things here that have to be page-aligned. - * This stuff goes at the beginning of the data segment, - * which is page-aligned. - */ - .data - .globl sdata -sdata: - .globl empty_zero_page -empty_zero_page: - .space 4096 - - .globl swapper_pg_dir -swapper_pg_dir: - .space 4096 - -/* - * This space gets a copy of optional info passed to us by the bootstrap - * Used to pass parameters into the kernel like root=/dev/sda1, etc. - */ - .globl cmd_line -cmd_line: - .space 512 - - .globl intercept_table -intercept_table: - .long 0, 0, i0x200, i0x300, i0x400, 0, i0x600, i0x700 - .long i0x800, 0, 0, 0, 0, i0xd00, 0, 0 - .long 0, 0, 0, i0x1300, 0, 0, 0, 0 - .long 0, 0, 0, 0, 0, 0, 0, 0 - .long 0, 0, 0, 0, 0, 0, 0, 0 - .long 0, 0, 0, 0, 0, 0, 0, 0 - -/* Room for two PTE pointers, usually the kernel and current user pointers - * to their respective root page table. - */ -abatron_pteptrs: - .space 8 |