powerpc/book3s64/radix: Fix boot failure with large amount of guest memory

If the hypervisor doesn't support hugepages, the kernel ends up allocating a large
number of page table pages. The early page table allocation was wrongly
setting the max memblock limit to ppc64_rma_size with radix translation
which resulted in boot failure as shown below.

Kernel panic - not syncing:
early_alloc_pgtable: Failed to allocate 16777216 bytes align=0x1000000 nid=-1 from=0x0000000000000000 max_addr=0xffffffffffffffff
 CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-24.9-default+ #2
 Call Trace:
 [c0000000016f3d00] [c0000000007c6470] dump_stack+0xc4/0x114 (unreliable)
 [c0000000016f3d40] [c00000000014c78c] panic+0x164/0x418
 [c0000000016f3dd0] [c000000000098890] early_alloc_pgtable+0xe0/0xec
 [c0000000016f3e60] [c0000000010a5440] radix__early_init_mmu+0x360/0x4b4
 [c0000000016f3ef0] [c000000001099bac] early_init_mmu+0x1c/0x3c
 [c0000000016f3f10] [c00000000109a320] early_setup+0x134/0x170

This was because the kernel was checking for the radix feature before we enable the
feature via mmu_features. This resulted in the kernel using hash restrictions on
radix.

Rework the early init code such that the kernel boot with memblock restrictions
as imposed by hash. At that point, the kernel still hasn't finalized the
translation the kernel will end up using.

We have three different ways of detecting radix.

1. dt_cpu_ftrs_scan -> used only in case of PowerNV
2. ibm,pa-features -> Used when we don't use cpu_dt_ftr_scan
3. CAS -> Where we negotiate with hypervisor about the supported translation.

We look at 1 or 2 early in the boot and after that, we look at the CAS vector to
finalize the translation the kernel will use. We also support a kernel command
line option (disable_radix) to switch to hash.

Update the memblock limit after mmu_early_init_devtree() if the kernel is going
to use radix translation. This forces some of the memblock allocations we do before
mmu_early_init_devtree() to be within the RMA limit.

Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines")
Reported-by: Shirisha Ganta <shiganta@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200828100852.426575-1-aneesh.kumar@linux.ibm.com

1 files changed, 9 insertions, 2 deletions

diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 02e127fa5777..8459056cce67 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -433,9 +433,16 @@ void __init mmu_early_init_devtree(void)
 	if (!(mfmsr() & MSR_HV))
 		early_check_vec5();
 
-	if (early_radix_enabled())
+	if (early_radix_enabled()) {
 		radix__early_init_devtree();
-	else
+		/*
+		 * We have finalized the translation we are going to use by now.
+		 * Radix mode is not limited by RMA / VRMA addressing.
+		 * Hence don't limit memblock allocations.
+		 */
+		ppc64_rma_size = ULONG_MAX;
+		memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE);
+	} else
 		hash__early_init_devtree();
 }
 #endif /* CONFIG_PPC_BOOK3S_64 */