diff options
author | James Bottomley <JBottomley@Parallels.com> | 2012-05-21 12:17:30 +0100 |
---|---|---|
committer | James Bottomley <JBottomley@Parallels.com> | 2012-05-21 12:17:30 +0100 |
commit | e34693336564f02b3e2cc09d8b872aef22a154e9 (patch) | |
tree | 09f51f10f9406042f9176e39b4dc8de850ba712e /arch/powerpc/kernel/entry_64.S | |
parent | 76b311fdbdd2e16e5d39cd496a67aa1a1b948914 (diff) | |
parent | de2eb4d5c5c25e8fb75d1e19092f24b83cb7d8d5 (diff) | |
download | linux-e34693336564f02b3e2cc09d8b872aef22a154e9.tar.bz2 |
Merge tag 'isci-for-3.5' into misc
isci update for 3.5
1/ Rework remote-node-context (RNC) handling for proper management of
the silicon state machine in error handling and hot-plug conditions.
Further details below, suffice to say if the RNC is mismanaged the
silicon state machines may lock up.
2/ Refactor the initialization code to be reused for suspend/resume support
3/ Miscellaneous bug fixes to address discovery issues and hardware
compatibility.
RNC rework details from Jeff Skirvin:
In the controller, devices as they appear on a SAS domain (or
direct-attached SATA devices) are represented by memory structures known
as "Remote Node Contexts" (RNCs). These structures are transferred from
main memory to the controller using a set of register commands; these
commands include setting up the context ("posting"), removing the
context ("invalidating"), and commands to control the scheduling of
commands and connections to that remote device ("suspensions" and
"resumptions"). There is a similar path to control RNC scheduling from
the protocol engine, which interprets the results of command and data
transmission and reception.
In general, the controller chooses among non-suspended RNCs to find one
that has work requiring scheduling the transmission of command and data
frames to a target. Likewise, when a target tries to return data back
to the initiator, the state of the RNC is used by the controller to
determine how to treat the incoming request. As an example, if the RNC
is in the state "TX/RX Suspended", incoming SSP connection requests from
the target will be rejected by the controller hardware. When an RNC is
"TX Suspended", it will not be selected by the controller hardware to
start outgoing command or data operations (with certain priority-based
exceptions).
As mentioned above, there are two sources for management of the RNC
states: commands from driver software, and the result of transmission
and reception conditions of commands and data signaled by the controller
hardware. As an example of the latter, if an outgoing SSP command ends
with a OPEN_REJECT(BAD_DESTINATION) status, the RNC state will
transition to the "TX Suspended" state, and this is signaled by the
controller hardware in the status to the completion of the pending
command as well as signaled in a controller hardware event. Examples of
the former are included in the patch changelogs.
Driver software is required to suspend the RNC in a "TX/RX Suspended"
condition before any outstanding commands can be terminated. Failure to
guarantee this can lead to a complete hardware hang condition. Earlier
versions of the driver software did not guarantee that an RNC was
correctly managed before I/O termination, and so operated in an unsafe
way.
Further, the driver performed unnecessary contortions to preserve the
remote device command state and so was more complicated than it needed
to be. A simplifying driver assumption is that once an I/O has entered
the error handler path without having completed in the target, the
requirement on the driver is that all use of the sas_task must end.
Beyond that, recovery of operation is dependent on libsas and other
components to reset, rediscover and reconfigure the device before normal
operation can restart. In the driver, this simplifying assumption meant
that the RNC management could be reduced to entry into the suspended
state, terminating the targeted I/O request, and resuming the RNC as
needed for device-specific management such as an SSP Abort Task or LUN
Reset Management request.
Diffstat (limited to 'arch/powerpc/kernel/entry_64.S')
-rw-r--r-- | arch/powerpc/kernel/entry_64.S | 62 |
1 files changed, 31 insertions, 31 deletions
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index f8a7a1a1a9f4..ef2074c3e906 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -588,23 +588,19 @@ _GLOBAL(ret_from_except_lite) fast_exc_return_irq: restore: /* - * This is the main kernel exit path, we first check if we - * have to change our interrupt state. + * This is the main kernel exit path. First we check if we + * are about to re-enable interrupts */ ld r5,SOFTE(r1) lbz r6,PACASOFTIRQEN(r13) - cmpwi cr1,r5,0 - cmpw cr0,r5,r6 - beq cr0,4f + cmpwi cr0,r5,0 + beq restore_irq_off - /* We do, handle disable first, which is easy */ - bne cr1,3f; - li r0,0 - stb r0,PACASOFTIRQEN(r13); - TRACE_DISABLE_INTS - b 4f + /* We are enabling, were we already enabled ? Yes, just return */ + cmpwi cr0,r6,1 + beq cr0,do_restore -3: /* + /* * We are about to soft-enable interrupts (we are hard disabled * at this point). We check if there's anything that needs to * be replayed first. @@ -626,7 +622,7 @@ restore_no_replay: /* * Final return path. BookE is handled in a different file */ -4: +do_restore: #ifdef CONFIG_PPC_BOOK3E b .exception_return_book3e #else @@ -700,6 +696,25 @@ fast_exception_return: #endif /* CONFIG_PPC_BOOK3E */ /* + * We are returning to a context with interrupts soft disabled. + * + * However, we may also about to hard enable, so we need to + * make sure that in this case, we also clear PACA_IRQ_HARD_DIS + * or that bit can get out of sync and bad things will happen + */ +restore_irq_off: + ld r3,_MSR(r1) + lbz r7,PACAIRQHAPPENED(r13) + andi. r0,r3,MSR_EE + beq 1f + rlwinm r7,r7,0,~PACA_IRQ_HARD_DIS + stb r7,PACAIRQHAPPENED(r13) +1: li r0,0 + stb r0,PACASOFTIRQEN(r13); + TRACE_DISABLE_INTS + b do_restore + + /* * Something did happen, check if a re-emit is needed * (this also clears paca->irq_happened) */ @@ -748,6 +763,9 @@ restore_check_irq_replay: #endif /* CONFIG_PPC_BOOK3E */ 1: b .ret_from_except /* What else to do here ? */ + + +3: do_work: #ifdef CONFIG_PREEMPT andi. r0,r3,MSR_PR /* Returning to user mode? */ @@ -767,16 +785,6 @@ do_work: SOFT_DISABLE_INTS(r3,r4) 1: bl .preempt_schedule_irq - /* Hard-disable interrupts again (and update PACA) */ -#ifdef CONFIG_PPC_BOOK3E - wrteei 0 -#else - ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */ - mtmsrd r10,1 -#endif /* CONFIG_PPC_BOOK3E */ - li r0,PACA_IRQ_HARD_DIS - stb r0,PACAIRQHAPPENED(r13) - /* Re-test flags and eventually loop */ clrrdi r9,r1,THREAD_SHIFT ld r4,TI_FLAGS(r9) @@ -787,14 +795,6 @@ do_work: user_work: #endif /* CONFIG_PREEMPT */ - /* Enable interrupts */ -#ifdef CONFIG_PPC_BOOK3E - wrteei 1 -#else - ori r10,r10,MSR_EE - mtmsrd r10,1 -#endif /* CONFIG_PPC_BOOK3E */ - andi. r0,r4,_TIF_NEED_RESCHED beq 1f bl .restore_interrupts |