Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Ben Herrenschmidt:
 "So here's my next branch for powerpc.  A bit late as I was on vacation
  last week.  It's mostly the same stuff that was in next already, I
  just added two patches today which are the wiring up of lockref for
  powerpc, which for some reason fell through the cracks last time and
  is trivial.

  The highlights are, in addition to a bunch of bug fixes:

   - Reworked Machine Check handling on kernels running without a
     hypervisor (or acting as a hypervisor).  Provides hooks to handle
     some errors in real mode such as TLB errors, handle SLB errors,
     etc...

   - Support for retrieving memory error information from the service
     processor on IBM servers running without a hypervisor and routing
     them to the memory poison infrastructure.

   - _PAGE_NUMA support on server processors

   - 32-bit BookE relocatable kernel support

   - FSL e6500 hardware tablewalk support

   - A bunch of new/revived board support

   - FSL e6500 deeper idle states and altivec powerdown support

  You'll notice a generic mm change here, it has been acked by the
  relevant authorities and is a pre-req for our _PAGE_NUMA support"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (121 commits)
  powerpc: Implement arch_spin_is_locked() using arch_spin_value_unlocked()
  powerpc: Add support for the optimised lockref implementation
  powerpc/powernv: Call OPAL sync before kexec'ing
  powerpc/eeh: Escalate error on non-existing PE
  powerpc/eeh: Handle multiple EEH errors
  powerpc: Fix transactional FP/VMX/VSX unavailable handlers
  powerpc: Don't corrupt transactional state when using FP/VMX in kernel
  powerpc: Reclaim two unused thread_info flag bits
  powerpc: Fix races with irq_work
  Move precessing of MCE queued event out from syscall exit path.
  pseries/cpuidle: Remove redundant call to ppc64_runlatch_off() in cpu idle routines
  powerpc: Make add_system_ram_resources() __init
  powerpc: add SATA_MV to ppc64_defconfig
  powerpc/powernv: Increase candidate fw image size
  powerpc: Add debug checks to catch invalid cpu-to-node mappings
  powerpc: Fix the setup of CPU-to-Node mappings during CPU online
  powerpc/iommu: Don't detach device without IOMMU group
  powerpc/eeh: Hotplug improvement
  powerpc/eeh: Call opal_pci_reinit() on powernv for restoring config space
  powerpc/eeh: Add restore_config operation
  ...

1 files changed, 1 insertions, 42 deletions

diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
index ec7c27a64671..ea534efa790d 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -69,49 +69,11 @@
 		};
 	};
 
-	nand@1,0 {
+	ifc_nand: nand@1,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "fsl,ifc-nand";
 		reg = <0x1 0x0 0x10000>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 1MB for u-boot Bootloader Image */
-			reg = <0x0 0x00100000>;
-			label = "NAND U-Boot Image";
-			read-only;
-		};
-
-		partition@100000 {
-			/* 1MB for DTB Image */
-			reg = <0x00100000 0x00100000>;
-			label = "NAND DTB Image";
-		};
-
-		partition@200000 {
-			/* 4MB for Linux Kernel Image */
-			reg = <0x00200000 0x00400000>;
-			label = "NAND Linux Kernel Image";
-		};
-
-		partition@600000 {
-			/* 4MB for Compressed Root file System Image */
-			reg = <0x00600000 0x00400000>;
-			label = "NAND Compressed RFS Image";
-		};
-
-		partition@a00000 {
-			/* 15MB for JFFS2 based Root file System */
-			reg = <0x00a00000 0x00f00000>;
-			label = "NAND JFFS2 Root File System";
-		};
-
-		partition@1900000 {
-			/* 7MB for User Area */
-			reg = <0x01900000 0x00700000>;
-			label = "NAND User area";
-		};
 	};
 
 	cpld@3,0 {
@@ -193,17 +155,14 @@
 
 	mdio@24000 {
 		phy0: ethernet-phy@0 {
-			interrupts = <3 1 0 0>;
 			reg = <0x1>;
 		};
 
 		phy1: ethernet-phy@1 {
-			interrupts = <2 1 0 0>;
 			reg = <0x0>;
 		};
 
 		phy2: ethernet-phy@2 {
-			interrupts = <2 1 0 0>;
 			reg = <0x2>;
 		};