Merge tag 'mips_fixes_5.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fixes from Paul Burton:

 - Fix IPI handling for Lantiq SoCs, which was broken by changes made
   back in v4.12.

 - Enable OF/DT serial support in ath79_defconfig to give us working
   serial by default.

 - Fix 64b builds for the Jazz platform.

 - Set up a struct device for the BCM47xx SoC to allow BCM47xx drivers
   to perform DMA again following the major DMA mapping changes made in
   v4.19.

 - Disable MSI on Cavium Octeon systems when the pcie_disable command
   line parameter introduced in v3.3 is used, in order to avoid
   inadvetently accessing PCIe controller registers despite the command
   line.

 - Fix a build failure for Cavium Octeon kernels with kexec enabled,
   introduced in v4.20.

 - Fix a regression in the behaviour of semctl/shmctl/msgctl IPC
   syscalls for kernels including n32 support but not o32 support caused
   by some cleanup in v3.19.

* tag 'mips_fixes_5.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: OCTEON: fix kexec support
  mips: fix n32 compat_ipc_parse_version
  Disable MSI also when pcie-octeon.pcie_disable on
  MIPS: BCM47XX: Setup struct device for the SoC
  MIPS: jazz: fix 64bit build
  MIPS: ath79: Enable OF serial ports in the default config
  MIPS: lantiq: Use CP0_LEGACY_COMPARE_IRQ
  MIPS: lantiq: Fix IPI interrupt handling

9 files changed, 46 insertions, 79 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 787290781b8c..0d14f51d0002 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -3155,6 +3155,7 @@ config MIPS32_O32
 config MIPS32_N32
 	bool "Kernel support for n32 binaries"
 	depends on 64BIT
+	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	select COMPAT
 	select MIPS32_COMPAT
 	select SYSVIPC_COMPAT if SYSVIPC
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 6054d49e608e..fe3773539eff 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -173,6 +173,31 @@ void __init plat_mem_setup(void)
 	pm_power_off = bcm47xx_machine_halt;
 }
 
+#ifdef CONFIG_BCM47XX_BCMA
+static struct device * __init bcm47xx_setup_device(void)
+{
+	struct device *dev;
+	int err;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+
+	err = dev_set_name(dev, "bcm47xx_soc");
+	if (err) {
+		pr_err("Failed to set SoC device name: %d\n", err);
+		kfree(dev);
+		return NULL;
+	}
+
+	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (err)
+		pr_err("Failed to set SoC DMA mask: %d\n", err);
+
+	return dev;
+}
+#endif
+
 /*
  * This finishes bus initialization doing things that were not possible without
  * kmalloc. Make sure to call it late enough (after mm_init).
@@ -183,6 +208,10 @@ void __init bcm47xx_bus_setup(void)
 	if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) {
 		int err;
 
+		bcm47xx_bus.bcma.dev = bcm47xx_setup_device();
+		if (!bcm47xx_bus.bcma.dev)
+			panic("Failed to setup SoC device\n");
+
 		err = bcma_host_soc_init(&bcm47xx_bus.bcma);
 		if (err)
 			panic("Failed to initialize BCMA bus (err %d)", err);
@@ -235,6 +264,8 @@ static int __init bcm47xx_register_bus_complete(void)
 #endif
 #ifdef CONFIG_BCM47XX_BCMA
 	case BCM47XX_BUS_TYPE_BCMA:
+		if (device_register(bcm47xx_bus.bcma.dev))
+			pr_err("Failed to register SoC device\n");
 		bcma_bus_register(&bcm47xx_bus.bcma.bus);
 		break;
 #endif
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 2c79ab52977a..8bf43c5a7bc7 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -98,7 +98,7 @@ static void octeon_kexec_smp_down(void *ignored)
 	"	sync						\n"
 	"	synci	($0)					\n");
 
-	relocated_kexec_smp_wait(NULL);
+	kexec_reboot();
 }
 #endif
 
diff --git a/arch/mips/configs/ath79_defconfig b/arch/mips/configs/ath79_defconfig
index 4e4ec779f182..6f981af67826 100644
--- a/arch/mips/configs/ath79_defconfig
+++ b/arch/mips/configs/ath79_defconfig
@@ -66,6 +66,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AR933X=y
 CONFIG_SERIAL_AR933X_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
diff --git a/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h b/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
index c6b63a409641..6dd8ad2409dc 100644
--- a/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
+++ b/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
@@ -18,8 +18,6 @@
 #define INT_NUM_EXTRA_START		(INT_NUM_IM4_IRL0 + 32)
 #define INT_NUM_IM_OFFSET		(INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
 
-#define MIPS_CPU_TIMER_IRQ			7
-
 #define MAX_IM			5
 
 #endif /* _FALCON_IRQ__ */
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
index 141076325307..0b424214a5e9 100644
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
@@ -19,8 +19,6 @@
 
 #define LTQ_DMA_CH0_INT		(INT_NUM_IM2_IRL0)
 
-#define MIPS_CPU_TIMER_IRQ	7
-
 #define MAX_IM			5
 
 #endif
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index 6256d35dbf4d..bedb5047aff3 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -74,14 +74,15 @@ static int __init vdma_init(void)
 						    get_order(VDMA_PGTBL_SIZE));
 	BUG_ON(!pgtbl);
 	dma_cache_wback_inv((unsigned long)pgtbl, VDMA_PGTBL_SIZE);
-	pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
+	pgtbl = (VDMA_PGTBL_ENTRY *)CKSEG1ADDR((unsigned long)pgtbl);
 
 	/*
 	 * Clear the R4030 translation table
 	 */
 	vdma_pgtbl_init();
 
-	r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));
+	r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE,
+			  CPHYSADDR((unsigned long)pgtbl));
 	r4030_write_reg32(JAZZ_R4030_TRSTBL_LIM, VDMA_PGTBL_SIZE);
 	r4030_write_reg32(JAZZ_R4030_TRSTBL_INV, 0);
 
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index f0bc3312ed11..6549499eb202 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -224,9 +224,11 @@ static struct irq_chip ltq_eiu_type = {
 	.irq_set_type = ltq_eiu_settype,
 };
 
-static void ltq_hw_irqdispatch(int module)
+static void ltq_hw_irq_handler(struct irq_desc *desc)
 {
+	int module = irq_desc_get_irq(desc) - 2;
 	u32 irq;
+	int hwirq;
 
 	irq = ltq_icu_r32(module, LTQ_ICU_IM0_IOSR);
 	if (irq == 0)
@@ -237,7 +239,8 @@ static void ltq_hw_irqdispatch(int module)
 	 * other bits might be bogus
 	 */
 	irq = __fls(irq);
-	do_IRQ((int)irq + MIPS_CPU_IRQ_CASCADE + (INT_NUM_IM_OFFSET * module));
+	hwirq = irq + MIPS_CPU_IRQ_CASCADE + (INT_NUM_IM_OFFSET * module);
+	generic_handle_irq(irq_linear_revmap(ltq_domain, hwirq));
 
 	/* if this is a EBU irq, we need to ack it or get a deadlock */
 	if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
@@ -245,49 +248,6 @@ static void ltq_hw_irqdispatch(int module)
 			LTQ_EBU_PCC_ISTAT);
 }
 
-#define DEFINE_HWx_IRQDISPATCH(x)					\
-	static void ltq_hw ## x ## _irqdispatch(void)			\
-	{								\
-		ltq_hw_irqdispatch(x);					\
-	}
-DEFINE_HWx_IRQDISPATCH(0)
-DEFINE_HWx_IRQDISPATCH(1)
-DEFINE_HWx_IRQDISPATCH(2)
-DEFINE_HWx_IRQDISPATCH(3)
-DEFINE_HWx_IRQDISPATCH(4)
-
-#if MIPS_CPU_TIMER_IRQ == 7
-static void ltq_hw5_irqdispatch(void)
-{
-	do_IRQ(MIPS_CPU_TIMER_IRQ);
-}
-#else
-DEFINE_HWx_IRQDISPATCH(5)
-#endif
-
-static void ltq_hw_irq_handler(struct irq_desc *desc)
-{
-	ltq_hw_irqdispatch(irq_desc_get_irq(desc) - 2);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-	int irq;
-
-	if (!pending) {
-		spurious_interrupt();
-		return;
-	}
-
-	pending >>= CAUSEB_IP;
-	while (pending) {
-		irq = fls(pending) - 1;
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-		pending &= ~BIT(irq);
-	}
-}
-
 static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
 {
 	struct irq_chip *chip = &ltq_irq_type;
@@ -343,38 +303,13 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 	for (i = 0; i < MAX_IM; i++)
 		irq_set_chained_handler(i + 2, ltq_hw_irq_handler);
 
-	if (cpu_has_vint) {
-		pr_info("Setting up vectored interrupts\n");
-		set_vi_handler(2, ltq_hw0_irqdispatch);
-		set_vi_handler(3, ltq_hw1_irqdispatch);
-		set_vi_handler(4, ltq_hw2_irqdispatch);
-		set_vi_handler(5, ltq_hw3_irqdispatch);
-		set_vi_handler(6, ltq_hw4_irqdispatch);
-		set_vi_handler(7, ltq_hw5_irqdispatch);
-	}
-
 	ltq_domain = irq_domain_add_linear(node,
 		(MAX_IM * INT_NUM_IM_OFFSET) + MIPS_CPU_IRQ_CASCADE,
 		&irq_domain_ops, 0);
 
-#ifndef CONFIG_MIPS_MT_SMP
-	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
-		IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
-#else
-	set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 |
-		IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
-#endif
-
 	/* tell oprofile which irq to use */
 	ltq_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);
 
-	/*
-	 * if the timer irq is not one of the mips irqs we need to
-	 * create a mapping
-	 */
-	if (MIPS_CPU_TIMER_IRQ != 7)
-		irq_create_mapping(ltq_domain, MIPS_CPU_TIMER_IRQ);
-
 	/* the external interrupts are optional and xway only */
 	eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway");
 	if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
@@ -411,7 +346,7 @@ EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
 
 unsigned int get_c0_compare_int(void)
 {
-	return MIPS_CPU_TIMER_IRQ;
+	return CP0_LEGACY_COMPARE_IRQ;
 }
 
 static struct of_device_id __initdata of_irq_ids[] = {
diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index 2a5bb849b10e..288b58b00dc8 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -369,7 +369,9 @@ int __init octeon_msi_initialize(void)
 	int irq;
 	struct irq_chip *msi;
 
-	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) {
+	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_INVALID) {
+		return 0;
+	} else if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) {
 		msi_rcv_reg[0] = CVMX_PEXP_NPEI_MSI_RCV0;
 		msi_rcv_reg[1] = CVMX_PEXP_NPEI_MSI_RCV1;
 		msi_rcv_reg[2] = CVMX_PEXP_NPEI_MSI_RCV2;