summaryrefslogtreecommitdiffstats
path: root/arch/mips/txx9
diff options
context:
space:
mode:
authorGeert Uytterhoeven <geert@linux-m68k.org>2016-08-18 14:57:47 +0200
committerRalf Baechle <ralf@linux-mips.org>2016-10-04 16:13:57 +0200
commit561eca4990557b684605090fe6a2f50cecec34e1 (patch)
treed6d9964648984f7176e7bb059a53d333246f189d /arch/mips/txx9
parentdb19462bb7acddd0a9881d75d960974982a454b8 (diff)
downloadlinux-561eca4990557b684605090fe6a2f50cecec34e1.tar.bz2
MIPS: TXx9: tx39xx: Move GPIO setup from .mem_setup() to .arch_init()
txx9_gpio_init() calls gpiochip_add_data(), which fails with -ENOMEM as it is called too early in the boot process. This causes all subsequent GPIO operations to fail silently. Postpone all GPIO setup to .arch_init() time to fix this. Suggested-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13967/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/txx9')
-rw-r--r--arch/mips/txx9/generic/setup_tx3927.c1
-rw-r--r--arch/mips/txx9/jmr3927/setup.c11
2 files changed, 9 insertions, 3 deletions
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
index 110e05c3eb8f..d3b83a92cf26 100644
--- a/arch/mips/txx9/generic/setup_tx3927.c
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -92,7 +92,6 @@ void __init tx3927_setup(void)
/* PIO */
__raw_writel(0, &tx3927_pioptr->maskcpu);
__raw_writel(0, &tx3927_pioptr->maskext);
- txx9_gpio_init(TX3927_PIO_REG, 0, 16);
conf = read_c0_conf();
if (conf & TX39_CONF_DCE) {
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 3206f76f300b..a455166dc6d4 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -142,8 +142,6 @@ static void __init jmr3927_board_init(void)
/* PIO[15:12] connected to LEDs */
__raw_writel(0x0000f000, &tx3927_pioptr->dir);
- gpio_request(11, "dipsw1");
- gpio_request(10, "dipsw2");
jmr3927_pci_setup();
@@ -204,6 +202,14 @@ static void __init jmr3927_device_init(void)
txx9_iocled_init(iocled_base, -1, 8, 1, "green", NULL);
}
+static void __init jmr3927_arch_init(void)
+{
+ txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+
+ gpio_request(11, "dipsw1");
+ gpio_request(10, "dipsw2");
+}
+
struct txx9_board_vec jmr3927_vec __initdata = {
.system = "Toshiba JMR_TX3927",
.prom_init = jmr3927_prom_init,
@@ -211,6 +217,7 @@ struct txx9_board_vec jmr3927_vec __initdata = {
.irq_setup = jmr3927_irq_setup,
.time_init = jmr3927_time_init,
.device_init = jmr3927_device_init,
+ .arch_init = jmr3927_arch_init,
#ifdef CONFIG_PCI
.pci_map_irq = jmr3927_pci_map_irq,
#endif