MIPS: lantiq: remove orphaned code

Now that all drivers are converted to OF we are able to remove some remaining
pieces of orphaned code.

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3841/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 2 insertions, 88 deletions

diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
index d0d40a42327c..6a2df709c576 100644
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -44,11 +44,6 @@
 #define SOC_TYPE_VR9_2		0x05 /* v1.2 */
 #define SOC_TYPE_AMAZON_SE	0x06
 
-/* ASC0/1 - serial port */
-#define LTQ_ASC0_BASE_ADDR	0x1E100400
-#define LTQ_ASC1_BASE_ADDR	0x1E100C00
-#define LTQ_ASC_SIZE		0x400
-
 /* BOOT_SEL - find what boot media we have */
 #define BS_EXT_ROM		0x0
 #define BS_FLASH		0x1
@@ -68,23 +63,10 @@ extern __iomem void *ltq_cgu_membase;
  * during early_printk no ioremap is possible
  * lets use KSEG1 instead
  */
+#define LTQ_ASC1_BASE_ADDR	0x1E100C00
 #define LTQ_EARLY_ASC		KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
 
-/* RCU - reset control unit */
-#define LTQ_RCU_BASE_ADDR	0x1F203000
-#define LTQ_RCU_SIZE		0x1000
-
-/* GPTU - general purpose timer unit */
-#define LTQ_GPTU_BASE_ADDR	0x18000300
-#define LTQ_GPTU_SIZE		0x100
-
 /* EBU - external bus unit */
-#define LTQ_EBU_GPIO_START	0x14000000
-#define LTQ_EBU_GPIO_SIZE	0x1000
-
-#define LTQ_EBU_BASE_ADDR	0x1E105300
-#define LTQ_EBU_SIZE		0x100
-
 #define LTQ_EBU_BUSCON0		0x0060
 #define LTQ_EBU_PCC_CON		0x0090
 #define LTQ_EBU_PCC_IEN		0x00A4
@@ -93,85 +75,17 @@ extern __iomem void *ltq_cgu_membase;
 #define LTQ_EBU_ADDRSEL1	0x0024
 #define EBU_WRDIS		0x80000000
 
-/* CGU - clock generation unit */
-#define LTQ_CGU_BASE_ADDR	0x1F103000
-#define LTQ_CGU_SIZE		0x1000
-
-/* ICU - interrupt control unit */
-#define LTQ_ICU_BASE_ADDR	0x1F880200
-#define LTQ_ICU_SIZE		0x100
-
-/* EIU - external interrupt unit */
-#define LTQ_EIU_BASE_ADDR	0x1F101000
-#define LTQ_EIU_SIZE		0x1000
-
-/* PMU - power management unit */
-#define LTQ_PMU_BASE_ADDR	0x1F102000
-#define LTQ_PMU_SIZE		0x1000
-
-#define PMU_DMA			0x0020
-#define PMU_USB			0x8041
-#define PMU_LED			0x0800
-#define PMU_GPT			0x1000
-#define PMU_PPE			0x2000
-#define PMU_FPI			0x4000
-#define PMU_SWITCH		0x10000000
-
-/* ETOP - ethernet */
-#define LTQ_ETOP_BASE_ADDR	0x1E180000
-#define LTQ_ETOP_SIZE		0x40000
-
-/* DMA */
-#define LTQ_DMA_BASE_ADDR	0x1E104100
-#define LTQ_DMA_SIZE		0x800
-
-/* PCI */
-#define PCI_CR_BASE_ADDR	0x1E105400
-#define PCI_CR_SIZE		0x400
-
 /* WDT */
-#define LTQ_WDT_BASE_ADDR	0x1F8803F0
-#define LTQ_WDT_SIZE		0x10
-
 #define LTQ_RST_CAUSE_WDTRST	0x20
 
-/* STP - serial to parallel conversion unit */
-#define LTQ_STP_BASE_ADDR	0x1E100BB0
-#define LTQ_STP_SIZE		0x40
-
-/* GPIO */
-#define LTQ_GPIO0_BASE_ADDR	0x1E100B10
-#define LTQ_GPIO1_BASE_ADDR	0x1E100B40
-#define LTQ_GPIO2_BASE_ADDR	0x1E100B70
-#define LTQ_GPIO_SIZE		0x30
-
-/* SSC */
-#define LTQ_SSC_BASE_ADDR	0x1e100800
-#define LTQ_SSC_SIZE		0x100
-
-/* MEI - dsl core */
-#define LTQ_MEI_BASE_ADDR	0x1E116000
-
-/* DEU - data encryption unit */
-#define LTQ_DEU_BASE_ADDR	0x1E103100
-
 /* MPS - multi processor unit (voice) */
 #define LTQ_MPS_BASE_ADDR	(KSEG1 + 0x1F107000)
 #define LTQ_MPS_CHIPID		((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
 
 /* request a non-gpio and set the PIO config */
+#define PMU_PPE			 BIT(13)
 extern void ltq_pmu_enable(unsigned int module);
 extern void ltq_pmu_disable(unsigned int module);
 
-static inline int ltq_is_ar9(void)
-{
-	return (ltq_get_soc_type() == SOC_TYPE_AR9);
-}
-
-static inline int ltq_is_vr9(void)
-{
-	return (ltq_get_soc_type() == SOC_TYPE_VR9);
-}
-
 #endif /* CONFIG_SOC_TYPE_XWAY */
 #endif /* _LTQ_XWAY_H__ */