Merge branch 'origin' into devel-stable

Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c

1 files changed, 383 insertions, 493 deletions

diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 854e95f1b07c..ae07423e6e82 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -130,6 +130,56 @@ static inline int au1xxx_cpu_needs_config_od(void)
 	return 0;
 }
 
+#define ALCHEMY_CPU_UNKNOWN	-1
+#define ALCHEMY_CPU_AU1000	0
+#define ALCHEMY_CPU_AU1500	1
+#define ALCHEMY_CPU_AU1100	2
+#define ALCHEMY_CPU_AU1550	3
+#define ALCHEMY_CPU_AU1200	4
+
+static inline int alchemy_get_cputype(void)
+{
+	switch (read_c0_prid() & 0xffff0000) {
+	case 0x00030000:
+		return ALCHEMY_CPU_AU1000;
+		break;
+	case 0x01030000:
+		return ALCHEMY_CPU_AU1500;
+		break;
+	case 0x02030000:
+		return ALCHEMY_CPU_AU1100;
+		break;
+	case 0x03030000:
+		return ALCHEMY_CPU_AU1550;
+		break;
+	case 0x04030000:
+	case 0x05030000:
+		return ALCHEMY_CPU_AU1200;
+		break;
+	}
+
+	return ALCHEMY_CPU_UNKNOWN;
+}
+
+static inline void alchemy_uart_putchar(u32 uart_phys, u8 c)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys);
+	int timeout, i;
+
+	/* check LSR TX_EMPTY bit */
+	timeout = 0xffffff;
+	do {
+		if (__raw_readl(base + 0x1c) & 0x20)
+			break;
+		/* slow down */
+		for (i = 10000; i; i--)
+			asm volatile ("nop");
+	} while (--timeout);
+
+	__raw_writel(c, base + 0x04);	/* tx */
+	wmb();
+}
+
 /* arch/mips/au1000/common/clocks.c */
 extern void set_au1x00_speed(unsigned int new_freq);
 extern unsigned int get_au1x00_speed(void);
@@ -143,20 +193,332 @@ void au_sleep(void);
 void save_au1xxx_intctl(void);
 void restore_au1xxx_intctl(void);
 
-/*
- * Every board describes its IRQ mapping with this table.
- */
-struct au1xxx_irqmap {
-	int	im_irq;
-	int	im_type;
-	int	im_request;
+
+/* SOC Interrupt numbers */
+
+#define AU1000_INTC0_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
+#define AU1000_INTC0_INT_LAST	(AU1000_INTC0_INT_BASE + 31)
+#define AU1000_INTC1_INT_BASE	(AU1000_INTC0_INT_LAST + 1)
+#define AU1000_INTC1_INT_LAST	(AU1000_INTC1_INT_BASE + 31)
+#define AU1000_MAX_INTR 	AU1000_INTC1_INT_LAST
+
+enum soc_au1000_ints {
+	AU1000_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1000_UART0_INT	= AU1000_FIRST_INT,
+	AU1000_UART1_INT,
+	AU1000_UART2_INT,
+	AU1000_UART3_INT,
+	AU1000_SSI0_INT,
+	AU1000_SSI1_INT,
+	AU1000_DMA_INT_BASE,
+
+	AU1000_TOY_INT		= AU1000_FIRST_INT + 14,
+	AU1000_TOY_MATCH0_INT,
+	AU1000_TOY_MATCH1_INT,
+	AU1000_TOY_MATCH2_INT,
+	AU1000_RTC_INT,
+	AU1000_RTC_MATCH0_INT,
+	AU1000_RTC_MATCH1_INT,
+	AU1000_RTC_MATCH2_INT,
+	AU1000_IRDA_TX_INT,
+	AU1000_IRDA_RX_INT,
+	AU1000_USB_DEV_REQ_INT,
+	AU1000_USB_DEV_SUS_INT,
+	AU1000_USB_HOST_INT,
+	AU1000_ACSYNC_INT,
+	AU1000_MAC0_DMA_INT,
+	AU1000_MAC1_DMA_INT,
+	AU1000_I2S_UO_INT,
+	AU1000_AC97C_INT,
+	AU1000_GPIO0_INT,
+	AU1000_GPIO1_INT,
+	AU1000_GPIO2_INT,
+	AU1000_GPIO3_INT,
+	AU1000_GPIO4_INT,
+	AU1000_GPIO5_INT,
+	AU1000_GPIO6_INT,
+	AU1000_GPIO7_INT,
+	AU1000_GPIO8_INT,
+	AU1000_GPIO9_INT,
+	AU1000_GPIO10_INT,
+	AU1000_GPIO11_INT,
+	AU1000_GPIO12_INT,
+	AU1000_GPIO13_INT,
+	AU1000_GPIO14_INT,
+	AU1000_GPIO15_INT,
+	AU1000_GPIO16_INT,
+	AU1000_GPIO17_INT,
+	AU1000_GPIO18_INT,
+	AU1000_GPIO19_INT,
+	AU1000_GPIO20_INT,
+	AU1000_GPIO21_INT,
+	AU1000_GPIO22_INT,
+	AU1000_GPIO23_INT,
+	AU1000_GPIO24_INT,
+	AU1000_GPIO25_INT,
+	AU1000_GPIO26_INT,
+	AU1000_GPIO27_INT,
+	AU1000_GPIO28_INT,
+	AU1000_GPIO29_INT,
+	AU1000_GPIO30_INT,
+	AU1000_GPIO31_INT,
 };
 
-/* core calls this function to let boards initialize other IRQ sources */
-void board_init_irq(void);
+enum soc_au1100_ints {
+	AU1100_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1100_UART0_INT	= AU1100_FIRST_INT,
+	AU1100_UART1_INT,
+	AU1100_SD_INT,
+	AU1100_UART3_INT,
+	AU1100_SSI0_INT,
+	AU1100_SSI1_INT,
+	AU1100_DMA_INT_BASE,
+
+	AU1100_TOY_INT		= AU1100_FIRST_INT + 14,
+	AU1100_TOY_MATCH0_INT,
+	AU1100_TOY_MATCH1_INT,
+	AU1100_TOY_MATCH2_INT,
+	AU1100_RTC_INT,
+	AU1100_RTC_MATCH0_INT,
+	AU1100_RTC_MATCH1_INT,
+	AU1100_RTC_MATCH2_INT,
+	AU1100_IRDA_TX_INT,
+	AU1100_IRDA_RX_INT,
+	AU1100_USB_DEV_REQ_INT,
+	AU1100_USB_DEV_SUS_INT,
+	AU1100_USB_HOST_INT,
+	AU1100_ACSYNC_INT,
+	AU1100_MAC0_DMA_INT,
+	AU1100_GPIO208_215_INT,
+	AU1100_LCD_INT,
+	AU1100_AC97C_INT,
+	AU1100_GPIO0_INT,
+	AU1100_GPIO1_INT,
+	AU1100_GPIO2_INT,
+	AU1100_GPIO3_INT,
+	AU1100_GPIO4_INT,
+	AU1100_GPIO5_INT,
+	AU1100_GPIO6_INT,
+	AU1100_GPIO7_INT,
+	AU1100_GPIO8_INT,
+	AU1100_GPIO9_INT,
+	AU1100_GPIO10_INT,
+	AU1100_GPIO11_INT,
+	AU1100_GPIO12_INT,
+	AU1100_GPIO13_INT,
+	AU1100_GPIO14_INT,
+	AU1100_GPIO15_INT,
+	AU1100_GPIO16_INT,
+	AU1100_GPIO17_INT,
+	AU1100_GPIO18_INT,
+	AU1100_GPIO19_INT,
+	AU1100_GPIO20_INT,
+	AU1100_GPIO21_INT,
+	AU1100_GPIO22_INT,
+	AU1100_GPIO23_INT,
+	AU1100_GPIO24_INT,
+	AU1100_GPIO25_INT,
+	AU1100_GPIO26_INT,
+	AU1100_GPIO27_INT,
+	AU1100_GPIO28_INT,
+	AU1100_GPIO29_INT,
+	AU1100_GPIO30_INT,
+	AU1100_GPIO31_INT,
+};
 
-/* boards call this to register additional (GPIO) interrupts */
-void au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count);
+enum soc_au1500_ints {
+	AU1500_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1500_UART0_INT	= AU1500_FIRST_INT,
+	AU1500_PCI_INTA,
+	AU1500_PCI_INTB,
+	AU1500_UART3_INT,
+	AU1500_PCI_INTC,
+	AU1500_PCI_INTD,
+	AU1500_DMA_INT_BASE,
+
+	AU1500_TOY_INT		= AU1500_FIRST_INT + 14,
+	AU1500_TOY_MATCH0_INT,
+	AU1500_TOY_MATCH1_INT,
+	AU1500_TOY_MATCH2_INT,
+	AU1500_RTC_INT,
+	AU1500_RTC_MATCH0_INT,
+	AU1500_RTC_MATCH1_INT,
+	AU1500_RTC_MATCH2_INT,
+	AU1500_PCI_ERR_INT,
+	AU1500_RESERVED_INT,
+	AU1500_USB_DEV_REQ_INT,
+	AU1500_USB_DEV_SUS_INT,
+	AU1500_USB_HOST_INT,
+	AU1500_ACSYNC_INT,
+	AU1500_MAC0_DMA_INT,
+	AU1500_MAC1_DMA_INT,
+	AU1500_AC97C_INT	= AU1500_FIRST_INT + 31,
+	AU1500_GPIO0_INT,
+	AU1500_GPIO1_INT,
+	AU1500_GPIO2_INT,
+	AU1500_GPIO3_INT,
+	AU1500_GPIO4_INT,
+	AU1500_GPIO5_INT,
+	AU1500_GPIO6_INT,
+	AU1500_GPIO7_INT,
+	AU1500_GPIO8_INT,
+	AU1500_GPIO9_INT,
+	AU1500_GPIO10_INT,
+	AU1500_GPIO11_INT,
+	AU1500_GPIO12_INT,
+	AU1500_GPIO13_INT,
+	AU1500_GPIO14_INT,
+	AU1500_GPIO15_INT,
+	AU1500_GPIO200_INT,
+	AU1500_GPIO201_INT,
+	AU1500_GPIO202_INT,
+	AU1500_GPIO203_INT,
+	AU1500_GPIO20_INT,
+	AU1500_GPIO204_INT,
+	AU1500_GPIO205_INT,
+	AU1500_GPIO23_INT,
+	AU1500_GPIO24_INT,
+	AU1500_GPIO25_INT,
+	AU1500_GPIO26_INT,
+	AU1500_GPIO27_INT,
+	AU1500_GPIO28_INT,
+	AU1500_GPIO206_INT,
+	AU1500_GPIO207_INT,
+	AU1500_GPIO208_215_INT,
+};
+
+enum soc_au1550_ints {
+	AU1550_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1550_UART0_INT	= AU1550_FIRST_INT,
+	AU1550_PCI_INTA,
+	AU1550_PCI_INTB,
+	AU1550_DDMA_INT,
+	AU1550_CRYPTO_INT,
+	AU1550_PCI_INTC,
+	AU1550_PCI_INTD,
+	AU1550_PCI_RST_INT,
+	AU1550_UART1_INT,
+	AU1550_UART3_INT,
+	AU1550_PSC0_INT,
+	AU1550_PSC1_INT,
+	AU1550_PSC2_INT,
+	AU1550_PSC3_INT,
+	AU1550_TOY_INT,
+	AU1550_TOY_MATCH0_INT,
+	AU1550_TOY_MATCH1_INT,
+	AU1550_TOY_MATCH2_INT,
+	AU1550_RTC_INT,
+	AU1550_RTC_MATCH0_INT,
+	AU1550_RTC_MATCH1_INT,
+	AU1550_RTC_MATCH2_INT,
+
+	AU1550_NAND_INT		= AU1550_FIRST_INT + 23,
+	AU1550_USB_DEV_REQ_INT,
+	AU1550_USB_DEV_SUS_INT,
+	AU1550_USB_HOST_INT,
+	AU1550_MAC0_DMA_INT,
+	AU1550_MAC1_DMA_INT,
+	AU1550_GPIO0_INT	= AU1550_FIRST_INT + 32,
+	AU1550_GPIO1_INT,
+	AU1550_GPIO2_INT,
+	AU1550_GPIO3_INT,
+	AU1550_GPIO4_INT,
+	AU1550_GPIO5_INT,
+	AU1550_GPIO6_INT,
+	AU1550_GPIO7_INT,
+	AU1550_GPIO8_INT,
+	AU1550_GPIO9_INT,
+	AU1550_GPIO10_INT,
+	AU1550_GPIO11_INT,
+	AU1550_GPIO12_INT,
+	AU1550_GPIO13_INT,
+	AU1550_GPIO14_INT,
+	AU1550_GPIO15_INT,
+	AU1550_GPIO200_INT,
+	AU1550_GPIO201_205_INT,	/* Logical or of GPIO201:205 */
+	AU1550_GPIO16_INT,
+	AU1550_GPIO17_INT,
+	AU1550_GPIO20_INT,
+	AU1550_GPIO21_INT,
+	AU1550_GPIO22_INT,
+	AU1550_GPIO23_INT,
+	AU1550_GPIO24_INT,
+	AU1550_GPIO25_INT,
+	AU1550_GPIO26_INT,
+	AU1550_GPIO27_INT,
+	AU1550_GPIO28_INT,
+	AU1550_GPIO206_INT,
+	AU1550_GPIO207_INT,
+	AU1550_GPIO208_215_INT,	/* Logical or of GPIO208:215 */
+};
+
+enum soc_au1200_ints {
+	AU1200_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1200_UART0_INT	= AU1200_FIRST_INT,
+	AU1200_SWT_INT,
+	AU1200_SD_INT,
+	AU1200_DDMA_INT,
+	AU1200_MAE_BE_INT,
+	AU1200_GPIO200_INT,
+	AU1200_GPIO201_INT,
+	AU1200_GPIO202_INT,
+	AU1200_UART1_INT,
+	AU1200_MAE_FE_INT,
+	AU1200_PSC0_INT,
+	AU1200_PSC1_INT,
+	AU1200_AES_INT,
+	AU1200_CAMERA_INT,
+	AU1200_TOY_INT,
+	AU1200_TOY_MATCH0_INT,
+	AU1200_TOY_MATCH1_INT,
+	AU1200_TOY_MATCH2_INT,
+	AU1200_RTC_INT,
+	AU1200_RTC_MATCH0_INT,
+	AU1200_RTC_MATCH1_INT,
+	AU1200_RTC_MATCH2_INT,
+	AU1200_GPIO203_INT,
+	AU1200_NAND_INT,
+	AU1200_GPIO204_INT,
+	AU1200_GPIO205_INT,
+	AU1200_GPIO206_INT,
+	AU1200_GPIO207_INT,
+	AU1200_GPIO208_215_INT,	/* Logical OR of 208:215 */
+	AU1200_USB_INT,
+	AU1200_LCD_INT,
+	AU1200_MAE_BOTH_INT,
+	AU1200_GPIO0_INT,
+	AU1200_GPIO1_INT,
+	AU1200_GPIO2_INT,
+	AU1200_GPIO3_INT,
+	AU1200_GPIO4_INT,
+	AU1200_GPIO5_INT,
+	AU1200_GPIO6_INT,
+	AU1200_GPIO7_INT,
+	AU1200_GPIO8_INT,
+	AU1200_GPIO9_INT,
+	AU1200_GPIO10_INT,
+	AU1200_GPIO11_INT,
+	AU1200_GPIO12_INT,
+	AU1200_GPIO13_INT,
+	AU1200_GPIO14_INT,
+	AU1200_GPIO15_INT,
+	AU1200_GPIO16_INT,
+	AU1200_GPIO17_INT,
+	AU1200_GPIO18_INT,
+	AU1200_GPIO19_INT,
+	AU1200_GPIO20_INT,
+	AU1200_GPIO21_INT,
+	AU1200_GPIO22_INT,
+	AU1200_GPIO23_INT,
+	AU1200_GPIO24_INT,
+	AU1200_GPIO25_INT,
+	AU1200_GPIO26_INT,
+	AU1200_GPIO27_INT,
+	AU1200_GPIO28_INT,
+	AU1200_GPIO29_INT,
+	AU1200_GPIO30_INT,
+	AU1200_GPIO31_INT,
+};
 
 #endif /* !defined (_LANGUAGE_ASSEMBLY) */
 
@@ -549,78 +911,16 @@ void au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count);
 
 #define IC1_TESTBIT		0xB1800080
 
-/* Interrupt Numbers */
+
 /* Au1000 */
 #ifdef CONFIG_SOC_AU1000
-enum soc_au1000_ints {
-	AU1000_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1000_UART0_INT	= AU1000_FIRST_INT,
-	AU1000_UART1_INT,				/* au1000 */
-	AU1000_UART2_INT,				/* au1000 */
-	AU1000_UART3_INT,
-	AU1000_SSI0_INT,				/* au1000 */
-	AU1000_SSI1_INT,				/* au1000 */
-	AU1000_DMA_INT_BASE,
-
-	AU1000_TOY_INT		= AU1000_FIRST_INT + 14,
-	AU1000_TOY_MATCH0_INT,
-	AU1000_TOY_MATCH1_INT,
-	AU1000_TOY_MATCH2_INT,
-	AU1000_RTC_INT,
-	AU1000_RTC_MATCH0_INT,
-	AU1000_RTC_MATCH1_INT,
-	AU1000_RTC_MATCH2_INT,
-	AU1000_IRDA_TX_INT,				/* au1000 */
-	AU1000_IRDA_RX_INT,				/* au1000 */
-	AU1000_USB_DEV_REQ_INT,
-	AU1000_USB_DEV_SUS_INT,
-	AU1000_USB_HOST_INT,
-	AU1000_ACSYNC_INT,
-	AU1000_MAC0_DMA_INT,
-	AU1000_MAC1_DMA_INT,
-	AU1000_I2S_UO_INT,				/* au1000 */
-	AU1000_AC97C_INT,
-	AU1000_GPIO_0,
-	AU1000_GPIO_1,
-	AU1000_GPIO_2,
-	AU1000_GPIO_3,
-	AU1000_GPIO_4,
-	AU1000_GPIO_5,
-	AU1000_GPIO_6,
-	AU1000_GPIO_7,
-	AU1000_GPIO_8,
-	AU1000_GPIO_9,
-	AU1000_GPIO_10,
-	AU1000_GPIO_11,
-	AU1000_GPIO_12,
-	AU1000_GPIO_13,
-	AU1000_GPIO_14,
-	AU1000_GPIO_15,
-	AU1000_GPIO_16,
-	AU1000_GPIO_17,
-	AU1000_GPIO_18,
-	AU1000_GPIO_19,
-	AU1000_GPIO_20,
-	AU1000_GPIO_21,
-	AU1000_GPIO_22,
-	AU1000_GPIO_23,
-	AU1000_GPIO_24,
-	AU1000_GPIO_25,
-	AU1000_GPIO_26,
-	AU1000_GPIO_27,
-	AU1000_GPIO_28,
-	AU1000_GPIO_29,
-	AU1000_GPIO_30,
-	AU1000_GPIO_31,
-};
 
 #define UART0_ADDR		0xB1100000
-#define UART1_ADDR		0xB1200000
-#define UART2_ADDR		0xB1300000
 #define UART3_ADDR		0xB1400000
 
 #define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
 #define USB_HOST_CONFIG 	0xB017FFFC
+#define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT
 
 #define AU1000_ETH0_BASE	0xB0500000
 #define AU1000_ETH1_BASE	0xB0510000
@@ -631,78 +931,13 @@ enum soc_au1000_ints {
 
 /* Au1500 */
 #ifdef CONFIG_SOC_AU1500
-enum soc_au1500_ints {
-	AU1500_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1500_UART0_INT	= AU1500_FIRST_INT,
-	AU1000_PCI_INTA,				/* au1500 */
-	AU1000_PCI_INTB,				/* au1500 */
-	AU1500_UART3_INT,
-	AU1000_PCI_INTC,				/* au1500 */
-	AU1000_PCI_INTD,				/* au1500 */
-	AU1000_DMA_INT_BASE,
-
-	AU1000_TOY_INT		= AU1500_FIRST_INT + 14,
-	AU1000_TOY_MATCH0_INT,
-	AU1000_TOY_MATCH1_INT,
-	AU1000_TOY_MATCH2_INT,
-	AU1000_RTC_INT,
-	AU1000_RTC_MATCH0_INT,
-	AU1000_RTC_MATCH1_INT,
-	AU1000_RTC_MATCH2_INT,
-	AU1500_PCI_ERR_INT,
-	AU1500_RESERVED_INT,
-	AU1000_USB_DEV_REQ_INT,
-	AU1000_USB_DEV_SUS_INT,
-	AU1000_USB_HOST_INT,
-	AU1000_ACSYNC_INT,
-	AU1500_MAC0_DMA_INT,
-	AU1500_MAC1_DMA_INT,
-	AU1000_AC97C_INT	= AU1500_FIRST_INT + 31,
-	AU1000_GPIO_0,
-	AU1000_GPIO_1,
-	AU1000_GPIO_2,
-	AU1000_GPIO_3,
-	AU1000_GPIO_4,
-	AU1000_GPIO_5,
-	AU1000_GPIO_6,
-	AU1000_GPIO_7,
-	AU1000_GPIO_8,
-	AU1000_GPIO_9,
-	AU1000_GPIO_10,
-	AU1000_GPIO_11,
-	AU1000_GPIO_12,
-	AU1000_GPIO_13,
-	AU1000_GPIO_14,
-	AU1000_GPIO_15,
-	AU1500_GPIO_200,
-	AU1500_GPIO_201,
-	AU1500_GPIO_202,
-	AU1500_GPIO_203,
-	AU1500_GPIO_20,
-	AU1500_GPIO_204,
-	AU1500_GPIO_205,
-	AU1500_GPIO_23,
-	AU1500_GPIO_24,
-	AU1500_GPIO_25,
-	AU1500_GPIO_26,
-	AU1500_GPIO_27,
-	AU1500_GPIO_28,
-	AU1500_GPIO_206,
-	AU1500_GPIO_207,
-	AU1500_GPIO_208_215,
-};
-
-/* shortcuts */
-#define INTA AU1000_PCI_INTA
-#define INTB AU1000_PCI_INTB
-#define INTC AU1000_PCI_INTC
-#define INTD AU1000_PCI_INTD
 
 #define UART0_ADDR		0xB1100000
 #define UART3_ADDR		0xB1400000
 
 #define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
 #define USB_HOST_CONFIG 	0xB017fffc
+#define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT
 
 #define AU1500_ETH0_BASE	0xB1500000
 #define AU1500_ETH1_BASE	0xB1510000
@@ -713,74 +948,13 @@ enum soc_au1500_ints {
 
 /* Au1100 */
 #ifdef CONFIG_SOC_AU1100
-enum soc_au1100_ints {
-	AU1100_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1100_UART0_INT	= AU1100_FIRST_INT,
-	AU1100_UART1_INT,
-	AU1100_SD_INT,
-	AU1100_UART3_INT,
-	AU1000_SSI0_INT,
-	AU1000_SSI1_INT,
-	AU1000_DMA_INT_BASE,
-
-	AU1000_TOY_INT		= AU1100_FIRST_INT + 14,
-	AU1000_TOY_MATCH0_INT,
-	AU1000_TOY_MATCH1_INT,
-	AU1000_TOY_MATCH2_INT,
-	AU1000_RTC_INT,
-	AU1000_RTC_MATCH0_INT,
-	AU1000_RTC_MATCH1_INT,
-	AU1000_RTC_MATCH2_INT,
-	AU1000_IRDA_TX_INT,
-	AU1000_IRDA_RX_INT,
-	AU1000_USB_DEV_REQ_INT,
-	AU1000_USB_DEV_SUS_INT,
-	AU1000_USB_HOST_INT,
-	AU1000_ACSYNC_INT,
-	AU1100_MAC0_DMA_INT,
-	AU1100_GPIO_208_215,
-	AU1100_LCD_INT,
-	AU1000_AC97C_INT,
-	AU1000_GPIO_0,
-	AU1000_GPIO_1,
-	AU1000_GPIO_2,
-	AU1000_GPIO_3,
-	AU1000_GPIO_4,
-	AU1000_GPIO_5,
-	AU1000_GPIO_6,
-	AU1000_GPIO_7,
-	AU1000_GPIO_8,
-	AU1000_GPIO_9,
-	AU1000_GPIO_10,
-	AU1000_GPIO_11,
-	AU1000_GPIO_12,
-	AU1000_GPIO_13,
-	AU1000_GPIO_14,
-	AU1000_GPIO_15,
-	AU1000_GPIO_16,
-	AU1000_GPIO_17,
-	AU1000_GPIO_18,
-	AU1000_GPIO_19,
-	AU1000_GPIO_20,
-	AU1000_GPIO_21,
-	AU1000_GPIO_22,
-	AU1000_GPIO_23,
-	AU1000_GPIO_24,
-	AU1000_GPIO_25,
-	AU1000_GPIO_26,
-	AU1000_GPIO_27,
-	AU1000_GPIO_28,
-	AU1000_GPIO_29,
-	AU1000_GPIO_30,
-	AU1000_GPIO_31,
-};
 
 #define UART0_ADDR		0xB1100000
-#define UART1_ADDR		0xB1200000
 #define UART3_ADDR		0xB1400000
 
 #define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
 #define USB_HOST_CONFIG 	0xB017FFFC
+#define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT
 
 #define AU1100_ETH0_BASE	0xB0500000
 #define AU1100_MAC0_ENABLE	0xB0520000
@@ -788,87 +962,12 @@ enum soc_au1100_ints {
 #endif /* CONFIG_SOC_AU1100 */
 
 #ifdef CONFIG_SOC_AU1550
-enum soc_au1550_ints {
-	AU1550_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1550_UART0_INT	= AU1550_FIRST_INT,
-	AU1550_PCI_INTA,
-	AU1550_PCI_INTB,
-	AU1550_DDMA_INT,
-	AU1550_CRYPTO_INT,
-	AU1550_PCI_INTC,
-	AU1550_PCI_INTD,
-	AU1550_PCI_RST_INT,
-	AU1550_UART1_INT,
-	AU1550_UART3_INT,
-	AU1550_PSC0_INT,
-	AU1550_PSC1_INT,
-	AU1550_PSC2_INT,
-	AU1550_PSC3_INT,
-	AU1000_TOY_INT,
-	AU1000_TOY_MATCH0_INT,
-	AU1000_TOY_MATCH1_INT,
-	AU1000_TOY_MATCH2_INT,
-	AU1000_RTC_INT,
-	AU1000_RTC_MATCH0_INT,
-	AU1000_RTC_MATCH1_INT,
-	AU1000_RTC_MATCH2_INT,
-
-	AU1550_NAND_INT			= AU1550_FIRST_INT + 23,
-	AU1550_USB_DEV_REQ_INT,
-	AU1000_USB_DEV_REQ_INT		= AU1550_USB_DEV_REQ_INT,
-	AU1550_USB_DEV_SUS_INT,
-	AU1000_USB_DEV_SUS_INT		= AU1550_USB_DEV_SUS_INT,
-	AU1550_USB_HOST_INT,
-	AU1000_USB_HOST_INT		= AU1550_USB_HOST_INT,
-	AU1550_MAC0_DMA_INT,
-	AU1550_MAC1_DMA_INT,
-	AU1000_GPIO_0			= AU1550_FIRST_INT + 32,
-	AU1000_GPIO_1,
-	AU1000_GPIO_2,
-	AU1000_GPIO_3,
-	AU1000_GPIO_4,
-	AU1000_GPIO_5,
-	AU1000_GPIO_6,
-	AU1000_GPIO_7,
-	AU1000_GPIO_8,
-	AU1000_GPIO_9,
-	AU1000_GPIO_10,
-	AU1000_GPIO_11,
-	AU1000_GPIO_12,
-	AU1000_GPIO_13,
-	AU1000_GPIO_14,
-	AU1000_GPIO_15,
-	AU1550_GPIO_200,
-	AU1500_GPIO_201_205,			/* Logical or of GPIO201:205 */
-	AU1500_GPIO_16,
-	AU1500_GPIO_17,
-	AU1500_GPIO_20,
-	AU1500_GPIO_21,
-	AU1500_GPIO_22,
-	AU1500_GPIO_23,
-	AU1500_GPIO_24,
-	AU1500_GPIO_25,
-	AU1500_GPIO_26,
-	AU1500_GPIO_27,
-	AU1500_GPIO_28,
-	AU1500_GPIO_206,
-	AU1500_GPIO_207,
-	AU1500_GPIO_208_218,			/* Logical or of GPIO208:218 */
-};
-
-/* shortcuts */
-#define INTA AU1550_PCI_INTA
-#define INTB AU1550_PCI_INTB
-#define INTC AU1550_PCI_INTC
-#define INTD AU1550_PCI_INTD
-
 #define UART0_ADDR		0xB1100000
-#define UART1_ADDR		0xB1200000
-#define UART3_ADDR		0xB1400000
 
 #define USB_OHCI_BASE		0x14020000	/* phys addr for ioremap */
 #define USB_OHCI_LEN		0x00060000
 #define USB_HOST_CONFIG 	0xB4027ffc
+#define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT
 
 #define AU1550_ETH0_BASE	0xB0500000
 #define AU1550_ETH1_BASE	0xB0510000
@@ -877,78 +976,10 @@ enum soc_au1550_ints {
 #define NUM_ETH_INTERFACES 2
 #endif /* CONFIG_SOC_AU1550 */
 
+
 #ifdef CONFIG_SOC_AU1200
-enum soc_au1200_ints {
-	AU1200_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1200_UART0_INT	= AU1200_FIRST_INT,
-	AU1200_SWT_INT,
-	AU1200_SD_INT,
-	AU1200_DDMA_INT,
-	AU1200_MAE_BE_INT,
-	AU1200_GPIO_200,
-	AU1200_GPIO_201,
-	AU1200_GPIO_202,
-	AU1200_UART1_INT,
-	AU1200_MAE_FE_INT,
-	AU1200_PSC0_INT,
-	AU1200_PSC1_INT,
-	AU1200_AES_INT,
-	AU1200_CAMERA_INT,
-	AU1000_TOY_INT,
-	AU1000_TOY_MATCH0_INT,
-	AU1000_TOY_MATCH1_INT,
-	AU1000_TOY_MATCH2_INT,
-	AU1000_RTC_INT,
-	AU1000_RTC_MATCH0_INT,
-	AU1000_RTC_MATCH1_INT,
-	AU1000_RTC_MATCH2_INT,
-	AU1200_GPIO_203,
-	AU1200_NAND_INT,
-	AU1200_GPIO_204,
-	AU1200_GPIO_205,
-	AU1200_GPIO_206,
-	AU1200_GPIO_207,
-	AU1200_GPIO_208_215,			/* Logical OR of 208:215 */
-	AU1200_USB_INT,
-	AU1000_USB_HOST_INT	= AU1200_USB_INT,
-	AU1200_LCD_INT,
-	AU1200_MAE_BOTH_INT,
-	AU1000_GPIO_0,
-	AU1000_GPIO_1,
-	AU1000_GPIO_2,
-	AU1000_GPIO_3,
-	AU1000_GPIO_4,
-	AU1000_GPIO_5,
-	AU1000_GPIO_6,
-	AU1000_GPIO_7,
-	AU1000_GPIO_8,
-	AU1000_GPIO_9,
-	AU1000_GPIO_10,
-	AU1000_GPIO_11,
-	AU1000_GPIO_12,
-	AU1000_GPIO_13,
-	AU1000_GPIO_14,
-	AU1000_GPIO_15,
-	AU1000_GPIO_16,
-	AU1000_GPIO_17,
-	AU1000_GPIO_18,
-	AU1000_GPIO_19,
-	AU1000_GPIO_20,
-	AU1000_GPIO_21,
-	AU1000_GPIO_22,
-	AU1000_GPIO_23,
-	AU1000_GPIO_24,
-	AU1000_GPIO_25,
-	AU1000_GPIO_26,
-	AU1000_GPIO_27,
-	AU1000_GPIO_28,
-	AU1000_GPIO_29,
-	AU1000_GPIO_30,
-	AU1000_GPIO_31,
-};
 
 #define UART0_ADDR		0xB1100000
-#define UART1_ADDR		0xB1200000
 
 #define USB_UOC_BASE		0x14020020
 #define USB_UOC_LEN		0x20
@@ -974,15 +1005,9 @@ enum soc_au1200_ints {
 #define USBMSRMCFG_RDCOMB	30
 #define USBMSRMCFG_PFEN 	31
 
-#endif /* CONFIG_SOC_AU1200 */
-
-#define AU1000_INTC0_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
-#define AU1000_INTC0_INT_LAST	(AU1000_INTC0_INT_BASE + 31)
-#define AU1000_INTC1_INT_BASE	(AU1000_INTC0_INT_BASE + 32)
-#define AU1000_INTC1_INT_LAST	(AU1000_INTC1_INT_BASE + 31)
+#define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT
 
-#define AU1000_MAX_INTR 	AU1000_INTC1_INT_LAST
-#define INTX			0xFF			/* not valid */
+#endif /* CONFIG_SOC_AU1200 */
 
 /* Programmable Counters 0 and 1 */
 #define SYS_BASE		0xB1900000
@@ -1231,14 +1256,6 @@ enum soc_au1200_ints {
 #define MAC_RX_BUFF3_STATUS	0x30
 #define MAC_RX_BUFF3_ADDR	0x34
 
-/* UARTS 0-3 */
-#define UART_BASE		UART0_ADDR
-#ifdef	CONFIG_SOC_AU1200
-#define UART_DEBUG_BASE 	UART1_ADDR
-#else
-#define UART_DEBUG_BASE 	UART3_ADDR
-#endif
-
 #define UART_RX		0	/* Receive buffer */
 #define UART_TX		4	/* Transmit buffer */
 #define UART_IER	8	/* Interrupt Enable Register */
@@ -1251,84 +1268,6 @@ enum soc_au1200_ints {
 #define UART_CLK	0x28	/* Baud Rate Clock Divider */
 #define UART_MOD_CNTRL	0x100	/* Module Control */
 
-#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
-#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
-#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
-#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
-#define UART_FCR_TRIGGER_MASK	0xF0 /* Mask for the FIFO trigger range */
-#define UART_FCR_R_TRIGGER_1	0x00 /* Mask for receive trigger set at 1 */
-#define UART_FCR_R_TRIGGER_4	0x40 /* Mask for receive trigger set at 4 */
-#define UART_FCR_R_TRIGGER_8	0x80 /* Mask for receive trigger set at 8 */
-#define UART_FCR_R_TRIGGER_14   0xA0 /* Mask for receive trigger set at 14 */
-#define UART_FCR_T_TRIGGER_0	0x00 /* Mask for transmit trigger set at 0 */
-#define UART_FCR_T_TRIGGER_4	0x10 /* Mask for transmit trigger set at 4 */
-#define UART_FCR_T_TRIGGER_8    0x20 /* Mask for transmit trigger set at 8 */
-#define UART_FCR_T_TRIGGER_12	0x30 /* Mask for transmit trigger set at 12 */
-
-/*
- * These are the definitions for the Line Control Register
- */
-#define UART_LCR_SBC	0x40	/* Set break control */
-#define UART_LCR_SPAR	0x20	/* Stick parity (?) */
-#define UART_LCR_EPAR	0x10	/* Even parity select */
-#define UART_LCR_PARITY	0x08	/* Parity Enable */
-#define UART_LCR_STOP	0x04	/* Stop bits: 0=1 stop bit, 1= 2 stop bits */
-#define UART_LCR_WLEN5  0x00	/* Wordlength: 5 bits */
-#define UART_LCR_WLEN6  0x01	/* Wordlength: 6 bits */
-#define UART_LCR_WLEN7  0x02	/* Wordlength: 7 bits */
-#define UART_LCR_WLEN8  0x03	/* Wordlength: 8 bits */
-
-/*
- * These are the definitions for the Line Status Register
- */
-#define UART_LSR_TEMT	0x40	/* Transmitter empty */
-#define UART_LSR_THRE	0x20	/* Transmit-hold-register empty */
-#define UART_LSR_BI	0x10	/* Break interrupt indicator */
-#define UART_LSR_FE	0x08	/* Frame error indicator */
-#define UART_LSR_PE	0x04	/* Parity error indicator */
-#define UART_LSR_OE	0x02	/* Overrun error indicator */
-#define UART_LSR_DR	0x01	/* Receiver data ready */
-
-/*
- * These are the definitions for the Interrupt Identification Register
- */
-#define UART_IIR_NO_INT	0x01	/* No interrupts pending */
-#define UART_IIR_ID	0x06	/* Mask for the interrupt ID */
-#define UART_IIR_MSI	0x00	/* Modem status interrupt */
-#define UART_IIR_THRI	0x02	/* Transmitter holding register empty */
-#define UART_IIR_RDI	0x04	/* Receiver data interrupt */
-#define UART_IIR_RLSI	0x06	/* Receiver line status interrupt */
-
-/*
- * These are the definitions for the Interrupt Enable Register
- */
-#define UART_IER_MSI	0x08	/* Enable Modem status interrupt */
-#define UART_IER_RLSI	0x04	/* Enable receiver line status interrupt */
-#define UART_IER_THRI	0x02	/* Enable Transmitter holding register int. */
-#define UART_IER_RDI	0x01	/* Enable receiver data interrupt */
-
-/*
- * These are the definitions for the Modem Control Register
- */
-#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
-#define UART_MCR_OUT2	0x08	/* Out2 complement */
-#define UART_MCR_OUT1	0x04	/* Out1 complement */
-#define UART_MCR_RTS	0x02	/* RTS complement */
-#define UART_MCR_DTR	0x01	/* DTR complement */
-
-/*
- * These are the definitions for the Modem Status Register
- */
-#define UART_MSR_DCD	0x80	/* Data Carrier Detect */
-#define UART_MSR_RI	0x40	/* Ring Indicator */
-#define UART_MSR_DSR	0x20	/* Data Set Ready */
-#define UART_MSR_CTS	0x10	/* Clear to Send */
-#define UART_MSR_DDCD	0x08	/* Delta DCD */
-#define UART_MSR_TERI	0x04	/* Trailing edge ring indicator */
-#define UART_MSR_DDSR	0x02	/* Delta DSR */
-#define UART_MSR_DCTS	0x01	/* Delta CTS */
-#define UART_MSR_ANY_DELTA 0x0F	/* Any of the delta bits! */
-
 /* SSIO */
 #define SSI0_STATUS		0xB1600000
 #  define SSI_STATUS_BF 	(1 << 4)
@@ -1720,7 +1659,7 @@ enum soc_au1200_ints {
 #define IOPORT_RESOURCE_START	0x00001000	/* skip legacy probing */
 #define IOPORT_RESOURCE_END	0xffffffff
 #define IOMEM_RESOURCE_START	0x10000000
-#define IOMEM_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_END	0xfffffffffULL
 
 #else /* Au1000 and Au1100 and Au1200 */
 
@@ -1728,7 +1667,7 @@ enum soc_au1200_ints {
 #define IOPORT_RESOURCE_START	0x10000000
 #define IOPORT_RESOURCE_END	0xffffffff
 #define IOMEM_RESOURCE_START	0x10000000
-#define IOMEM_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_END	0xfffffffffULL
 
 #define PCI_IO_START	0
 #define PCI_IO_END	0
@@ -1739,53 +1678,4 @@ enum soc_au1200_ints {
 
 #endif
 
-#ifndef _LANGUAGE_ASSEMBLY
-typedef volatile struct {
-	/* 0x0000 */ u32 toytrim;
-	/* 0x0004 */ u32 toywrite;
-	/* 0x0008 */ u32 toymatch0;
-	/* 0x000C */ u32 toymatch1;
-	/* 0x0010 */ u32 toymatch2;
-	/* 0x0014 */ u32 cntrctrl;
-	/* 0x0018 */ u32 scratch0;
-	/* 0x001C */ u32 scratch1;
-	/* 0x0020 */ u32 freqctrl0;
-	/* 0x0024 */ u32 freqctrl1;
-	/* 0x0028 */ u32 clksrc;
-	/* 0x002C */ u32 pinfunc;
-	/* 0x0030 */ u32 reserved0;
-	/* 0x0034 */ u32 wakemsk;
-	/* 0x0038 */ u32 endian;
-	/* 0x003C */ u32 powerctrl;
-	/* 0x0040 */ u32 toyread;
-	/* 0x0044 */ u32 rtctrim;
-	/* 0x0048 */ u32 rtcwrite;
-	/* 0x004C */ u32 rtcmatch0;
-	/* 0x0050 */ u32 rtcmatch1;
-	/* 0x0054 */ u32 rtcmatch2;
-	/* 0x0058 */ u32 rtcread;
-	/* 0x005C */ u32 wakesrc;
-	/* 0x0060 */ u32 cpupll;
-	/* 0x0064 */ u32 auxpll;
-	/* 0x0068 */ u32 reserved1;
-	/* 0x006C */ u32 reserved2;
-	/* 0x0070 */ u32 reserved3;
-	/* 0x0074 */ u32 reserved4;
-	/* 0x0078 */ u32 slppwr;
-	/* 0x007C */ u32 sleep;
-	/* 0x0080 */ u32 reserved5[32];
-	/* 0x0100 */ u32 trioutrd;
-#define trioutclr trioutrd
-	/* 0x0104 */ u32 reserved6;
-	/* 0x0108 */ u32 outputrd;
-#define outputset outputrd
-	/* 0x010C */ u32 outputclr;
-	/* 0x0110 */ u32 pinstaterd;
-#define pininputen pinstaterd
-} AU1X00_SYS;
-
-static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE;
-
-#endif
-
 #endif