summaryrefslogtreecommitdiffstats
path: root/arch/m68k/coldfire
diff options
context:
space:
mode:
authorGreg Ungerer <gerg@uclinux.org>2014-08-19 11:39:09 +1000
committerGreg Ungerer <gerg@uclinux.org>2014-09-29 09:18:34 +1000
commitf86b9e03837beafb4b48d53a76ee4b88559226de (patch)
tree53a673c3719aec83c6c55c265ed6e6433d6550ca /arch/m68k/coldfire
parentfe82dcec644244676d55a1384c958d5f67979adb (diff)
downloadlinux-f86b9e03837beafb4b48d53a76ee4b88559226de.tar.bz2
m68k: move coldfire platform code
Move the m68k ColdFire platform support code directory to be with the existing m68k platforms. Although the ColdFire is not a platform as such, we have always kept all its support together. No reason to change that as this time. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Diffstat (limited to 'arch/m68k/coldfire')
-rw-r--r--arch/m68k/coldfire/Makefile41
-rw-r--r--arch/m68k/coldfire/cache.c48
-rw-r--r--arch/m68k/coldfire/clk.c124
-rw-r--r--arch/m68k/coldfire/device.c369
-rw-r--r--arch/m68k/coldfire/dma.c42
-rw-r--r--arch/m68k/coldfire/dma_timer.c81
-rw-r--r--arch/m68k/coldfire/entry.S203
-rw-r--r--arch/m68k/coldfire/firebee.c86
-rw-r--r--arch/m68k/coldfire/gpio.c186
-rw-r--r--arch/m68k/coldfire/head.S298
-rw-r--r--arch/m68k/coldfire/intc-2.c212
-rw-r--r--arch/m68k/coldfire/intc-5249.c61
-rw-r--r--arch/m68k/coldfire/intc-525x.c91
-rw-r--r--arch/m68k/coldfire/intc-5272.c185
-rw-r--r--arch/m68k/coldfire/intc-simr.c199
-rw-r--r--arch/m68k/coldfire/intc.c150
-rw-r--r--arch/m68k/coldfire/m5206.c58
-rw-r--r--arch/m68k/coldfire/m520x.c180
-rw-r--r--arch/m68k/coldfire/m523x.c86
-rw-r--r--arch/m68k/coldfire/m5249.c126
-rw-r--r--arch/m68k/coldfire/m525x.c88
-rw-r--r--arch/m68k/coldfire/m5272.c135
-rw-r--r--arch/m68k/coldfire/m527x.c126
-rw-r--r--arch/m68k/coldfire/m528x.c132
-rw-r--r--arch/m68k/coldfire/m5307.c78
-rw-r--r--arch/m68k/coldfire/m53xx.c588
-rw-r--r--arch/m68k/coldfire/m5407.c53
-rw-r--r--arch/m68k/coldfire/m5441x.c261
-rw-r--r--arch/m68k/coldfire/m54xx.c129
-rw-r--r--arch/m68k/coldfire/mcf8390.c38
-rw-r--r--arch/m68k/coldfire/nettel.c153
-rw-r--r--arch/m68k/coldfire/pci.c325
-rw-r--r--arch/m68k/coldfire/pit.c167
-rw-r--r--arch/m68k/coldfire/reset.c50
-rw-r--r--arch/m68k/coldfire/sltimers.c149
-rw-r--r--arch/m68k/coldfire/timers.c195
-rw-r--r--arch/m68k/coldfire/vectors.c70
37 files changed, 5563 insertions, 0 deletions
diff --git a/arch/m68k/coldfire/Makefile b/arch/m68k/coldfire/Makefile
new file mode 100644
index 000000000000..68f0fac60099
--- /dev/null
+++ b/arch/m68k/coldfire/Makefile
@@ -0,0 +1,41 @@
+#
+# Makefile for the m68knommu kernel.
+#
+
+#
+# If you want to play with the HW breakpoints then you will
+# need to add define this, which will give you a stack backtrace
+# on the console port whenever a DBG interrupt occurs. You have to
+# set up you HW breakpoints to trigger a DBG interrupt:
+#
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
+#
+
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
+
+obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o dma.o entry.o vectors.o
+obj-$(CONFIG_M5206) += m5206.o timers.o intc.o reset.o
+obj-$(CONFIG_M5206e) += m5206.o timers.o intc.o reset.o
+obj-$(CONFIG_M520x) += m520x.o pit.o intc-simr.o reset.o
+obj-$(CONFIG_M523x) += m523x.o pit.o dma_timer.o intc-2.o reset.o
+obj-$(CONFIG_M5249) += m5249.o timers.o intc.o intc-5249.o reset.o
+obj-$(CONFIG_M525x) += m525x.o timers.o intc.o intc-525x.o reset.o
+obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o
+obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o
+obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o
+obj-$(CONFIG_M5307) += m5307.o timers.o intc.o reset.o
+obj-$(CONFIG_M53xx) += m53xx.o timers.o intc-simr.o reset.o
+obj-$(CONFIG_M5407) += m5407.o timers.o intc.o reset.o
+obj-$(CONFIG_M54xx) += m54xx.o sltimers.o intc-2.o
+obj-$(CONFIG_M5441x) += m5441x.o pit.o intc-simr.o reset.o
+
+obj-$(CONFIG_NETtel) += nettel.o
+obj-$(CONFIG_CLEOPATRA) += nettel.o
+obj-$(CONFIG_FIREBEE) += firebee.o
+obj-$(CONFIG_MCF8390) += mcf8390.o
+
+obj-$(CONFIG_PCI) += pci.o
+
+obj-y += gpio.o
+extra-y := head.o
diff --git a/arch/m68k/coldfire/cache.c b/arch/m68k/coldfire/cache.c
new file mode 100644
index 000000000000..71beeaf0c5c4
--- /dev/null
+++ b/arch/m68k/coldfire/cache.c
@@ -0,0 +1,48 @@
+/***************************************************************************/
+
+/*
+ * cache.c -- general ColdFire Cache maintenance code
+ *
+ * Copyright (C) 2010, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+#ifdef CACHE_PUSH
+/***************************************************************************/
+
+/*
+ * Use cpushl to push all dirty cache lines back to memory.
+ * Older versions of GAS don't seem to know how to generate the
+ * ColdFire cpushl instruction... Oh well, bit stuff it for now.
+ */
+
+void mcf_cache_push(void)
+{
+ __asm__ __volatile__ (
+ "clrl %%d0\n\t"
+ "1:\n\t"
+ "movel %%d0,%%a0\n\t"
+ "2:\n\t"
+ ".word 0xf468\n\t"
+ "addl %0,%%a0\n\t"
+ "cmpl %1,%%a0\n\t"
+ "blt 2b\n\t"
+ "addql #1,%%d0\n\t"
+ "cmpil %2,%%d0\n\t"
+ "bne 1b\n\t"
+ : /* No output */
+ : "i" (CACHE_LINE_SIZE),
+ "i" (DCACHE_SIZE / CACHE_WAYS),
+ "i" (CACHE_WAYS)
+ : "d0", "a0" );
+}
+
+/***************************************************************************/
+#endif /* CACHE_PUSH */
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/clk.c b/arch/m68k/coldfire/clk.c
new file mode 100644
index 000000000000..fddfdccae63b
--- /dev/null
+++ b/arch/m68k/coldfire/clk.c
@@ -0,0 +1,124 @@
+/***************************************************************************/
+
+/*
+ * clk.c -- general ColdFire CPU kernel clk handling
+ *
+ * Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
+
+static DEFINE_SPINLOCK(clk_lock);
+
+#ifdef MCFPM_PPMCR0
+/*
+ * For more advanced ColdFire parts that have clocks that can be enabled
+ * we supply enable/disable functions. These must properly define their
+ * clocks in their platform specific code.
+ */
+void __clk_init_enabled(struct clk *clk)
+{
+ clk->enabled = 1;
+ clk->clk_ops->enable(clk);
+}
+
+void __clk_init_disabled(struct clk *clk)
+{
+ clk->enabled = 0;
+ clk->clk_ops->disable(clk);
+}
+
+static void __clk_enable0(struct clk *clk)
+{
+ __raw_writeb(clk->slot, MCFPM_PPMCR0);
+}
+
+static void __clk_disable0(struct clk *clk)
+{
+ __raw_writeb(clk->slot, MCFPM_PPMSR0);
+}
+
+struct clk_ops clk_ops0 = {
+ .enable = __clk_enable0,
+ .disable = __clk_disable0,
+};
+
+#ifdef MCFPM_PPMCR1
+static void __clk_enable1(struct clk *clk)
+{
+ __raw_writeb(clk->slot, MCFPM_PPMCR1);
+}
+
+static void __clk_disable1(struct clk *clk)
+{
+ __raw_writeb(clk->slot, MCFPM_PPMSR1);
+}
+
+struct clk_ops clk_ops1 = {
+ .enable = __clk_enable1,
+ .disable = __clk_disable1,
+};
+#endif /* MCFPM_PPMCR1 */
+#endif /* MCFPM_PPMCR0 */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ const char *clk_name = dev ? dev_name(dev) : id ? id : NULL;
+ struct clk *clk;
+ unsigned i;
+
+ for (i = 0; (clk = mcf_clks[i]) != NULL; ++i)
+ if (!strcmp(clk->name, clk_name))
+ return clk;
+ pr_warn("clk_get: didn't find clock %s\n", clk_name);
+ return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&clk_lock, flags);
+ if ((clk->enabled++ == 0) && clk->clk_ops)
+ clk->clk_ops->enable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&clk_lock, flags);
+ if ((--clk->enabled == 0) && clk->clk_ops)
+ clk->clk_ops->disable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+void clk_put(struct clk *clk)
+{
+ if (clk->enabled != 0)
+ pr_warn("clk_put %s still enabled\n", clk->name);
+}
+EXPORT_SYMBOL(clk_put);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/device.c b/arch/m68k/coldfire/device.c
new file mode 100644
index 000000000000..71ea4c02795d
--- /dev/null
+++ b/arch/m68k/coldfire/device.c
@@ -0,0 +1,369 @@
+/*
+ * device.c -- common ColdFire SoC device support
+ *
+ * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
+#include <linux/fec.h>
+#include <asm/traps.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
+
+/*
+ * All current ColdFire parts contain from 2, 3, 4 or 10 UARTS.
+ */
+static struct mcf_platform_uart mcf_uart_platform_data[] = {
+ {
+ .mapbase = MCFUART_BASE0,
+ .irq = MCF_IRQ_UART0,
+ },
+ {
+ .mapbase = MCFUART_BASE1,
+ .irq = MCF_IRQ_UART1,
+ },
+#ifdef MCFUART_BASE2
+ {
+ .mapbase = MCFUART_BASE2,
+ .irq = MCF_IRQ_UART2,
+ },
+#endif
+#ifdef MCFUART_BASE3
+ {
+ .mapbase = MCFUART_BASE3,
+ .irq = MCF_IRQ_UART3,
+ },
+#endif
+#ifdef MCFUART_BASE4
+ {
+ .mapbase = MCFUART_BASE4,
+ .irq = MCF_IRQ_UART4,
+ },
+#endif
+#ifdef MCFUART_BASE5
+ {
+ .mapbase = MCFUART_BASE5,
+ .irq = MCF_IRQ_UART5,
+ },
+#endif
+#ifdef MCFUART_BASE6
+ {
+ .mapbase = MCFUART_BASE6,
+ .irq = MCF_IRQ_UART6,
+ },
+#endif
+#ifdef MCFUART_BASE7
+ {
+ .mapbase = MCFUART_BASE7,
+ .irq = MCF_IRQ_UART7,
+ },
+#endif
+#ifdef MCFUART_BASE8
+ {
+ .mapbase = MCFUART_BASE8,
+ .irq = MCF_IRQ_UART8,
+ },
+#endif
+#ifdef MCFUART_BASE9
+ {
+ .mapbase = MCFUART_BASE9,
+ .irq = MCF_IRQ_UART9,
+ },
+#endif
+ { },
+};
+
+static struct platform_device mcf_uart = {
+ .name = "mcfuart",
+ .id = 0,
+ .dev.platform_data = mcf_uart_platform_data,
+};
+
+#ifdef CONFIG_FEC
+
+#ifdef CONFIG_M5441x
+#define FEC_NAME "enet-fec"
+static struct fec_platform_data fec_pdata = {
+ .phy = PHY_INTERFACE_MODE_RMII,
+};
+#define FEC_PDATA (&fec_pdata)
+#else
+#define FEC_NAME "fec"
+#define FEC_PDATA NULL
+#endif
+
+/*
+ * Some ColdFire cores contain the Fast Ethernet Controller (FEC)
+ * block. It is Freescale's own hardware block. Some ColdFires
+ * have 2 of these.
+ */
+static struct resource mcf_fec0_resources[] = {
+ {
+ .start = MCFFEC_BASE0,
+ .end = MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MCF_IRQ_FECRX0,
+ .end = MCF_IRQ_FECRX0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = MCF_IRQ_FECTX0,
+ .end = MCF_IRQ_FECTX0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = MCF_IRQ_FECENTC0,
+ .end = MCF_IRQ_FECENTC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mcf_fec0 = {
+ .name = FEC_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mcf_fec0_resources),
+ .resource = mcf_fec0_resources,
+ .dev.platform_data = FEC_PDATA,
+};
+
+#ifdef MCFFEC_BASE1
+static struct resource mcf_fec1_resources[] = {
+ {
+ .start = MCFFEC_BASE1,
+ .end = MCFFEC_BASE1 + MCFFEC_SIZE1 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MCF_IRQ_FECRX1,
+ .end = MCF_IRQ_FECRX1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = MCF_IRQ_FECTX1,
+ .end = MCF_IRQ_FECTX1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = MCF_IRQ_FECENTC1,
+ .end = MCF_IRQ_FECENTC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mcf_fec1 = {
+ .name = FEC_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mcf_fec1_resources),
+ .resource = mcf_fec1_resources,
+ .dev.platform_data = FEC_PDATA,
+};
+#endif /* MCFFEC_BASE1 */
+#endif /* CONFIG_FEC */
+
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+/*
+ * The ColdFire QSPI module is an SPI protocol hardware block used
+ * on a number of different ColdFire CPUs.
+ */
+static struct resource mcf_qspi_resources[] = {
+ {
+ .start = MCFQSPI_BASE,
+ .end = MCFQSPI_BASE + MCFQSPI_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MCF_IRQ_QSPI,
+ .end = MCF_IRQ_QSPI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static int mcf_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+ int status;
+
+ status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+ if (status) {
+ pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+ goto fail0;
+ }
+ status = gpio_direction_output(MCFQSPI_CS0, 1);
+ if (status) {
+ pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+ goto fail1;
+ }
+
+ status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+ if (status) {
+ pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+ goto fail1;
+ }
+ status = gpio_direction_output(MCFQSPI_CS1, 1);
+ if (status) {
+ pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+ goto fail2;
+ }
+
+ status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+ if (status) {
+ pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+ goto fail2;
+ }
+ status = gpio_direction_output(MCFQSPI_CS2, 1);
+ if (status) {
+ pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+ goto fail3;
+ }
+
+#ifdef MCFQSPI_CS3
+ status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+ if (status) {
+ pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+ goto fail3;
+ }
+ status = gpio_direction_output(MCFQSPI_CS3, 1);
+ if (status) {
+ pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+ gpio_free(MCFQSPI_CS3);
+ goto fail3;
+ }
+#endif
+
+ return 0;
+
+fail3:
+ gpio_free(MCFQSPI_CS2);
+fail2:
+ gpio_free(MCFQSPI_CS1);
+fail1:
+ gpio_free(MCFQSPI_CS0);
+fail0:
+ return status;
+}
+
+static void mcf_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+#ifdef MCFQSPI_CS3
+ gpio_free(MCFQSPI_CS3);
+#endif
+ gpio_free(MCFQSPI_CS2);
+ gpio_free(MCFQSPI_CS1);
+ gpio_free(MCFQSPI_CS0);
+}
+
+static void mcf_cs_select(struct mcfqspi_cs_control *cs_control,
+ u8 chip_select, bool cs_high)
+{
+ switch (chip_select) {
+ case 0:
+ gpio_set_value(MCFQSPI_CS0, cs_high);
+ break;
+ case 1:
+ gpio_set_value(MCFQSPI_CS1, cs_high);
+ break;
+ case 2:
+ gpio_set_value(MCFQSPI_CS2, cs_high);
+ break;
+#ifdef MCFQSPI_CS3
+ case 3:
+ gpio_set_value(MCFQSPI_CS3, cs_high);
+ break;
+#endif
+ }
+}
+
+static void mcf_cs_deselect(struct mcfqspi_cs_control *cs_control,
+ u8 chip_select, bool cs_high)
+{
+ switch (chip_select) {
+ case 0:
+ gpio_set_value(MCFQSPI_CS0, !cs_high);
+ break;
+ case 1:
+ gpio_set_value(MCFQSPI_CS1, !cs_high);
+ break;
+ case 2:
+ gpio_set_value(MCFQSPI_CS2, !cs_high);
+ break;
+#ifdef MCFQSPI_CS3
+ case 3:
+ gpio_set_value(MCFQSPI_CS3, !cs_high);
+ break;
+#endif
+ }
+}
+
+static struct mcfqspi_cs_control mcf_cs_control = {
+ .setup = mcf_cs_setup,
+ .teardown = mcf_cs_teardown,
+ .select = mcf_cs_select,
+ .deselect = mcf_cs_deselect,
+};
+
+static struct mcfqspi_platform_data mcf_qspi_data = {
+ .bus_num = 0,
+ .num_chipselect = 4,
+ .cs_control = &mcf_cs_control,
+};
+
+static struct platform_device mcf_qspi = {
+ .name = "mcfqspi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mcf_qspi_resources),
+ .resource = mcf_qspi_resources,
+ .dev.platform_data = &mcf_qspi_data,
+};
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+
+static struct platform_device *mcf_devices[] __initdata = {
+ &mcf_uart,
+#ifdef CONFIG_FEC
+ &mcf_fec0,
+#ifdef MCFFEC_BASE1
+ &mcf_fec1,
+#endif
+#endif
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ &mcf_qspi,
+#endif
+};
+
+/*
+ * Some ColdFire UARTs let you set the IRQ line to use.
+ */
+static void __init mcf_uart_set_irq(void)
+{
+#ifdef MCFUART_UIVR
+ /* UART0 interrupt setup */
+ writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCFSIM_UART1ICR);
+ writeb(MCF_IRQ_UART0, MCFUART_BASE0 + MCFUART_UIVR);
+ mcf_mapirq2imr(MCF_IRQ_UART0, MCFINTC_UART0);
+
+ /* UART1 interrupt setup */
+ writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCFSIM_UART2ICR);
+ writeb(MCF_IRQ_UART1, MCFUART_BASE1 + MCFUART_UIVR);
+ mcf_mapirq2imr(MCF_IRQ_UART1, MCFINTC_UART1);
+#endif
+}
+
+static int __init mcf_init_devices(void)
+{
+ mcf_uart_set_irq();
+ platform_add_devices(mcf_devices, ARRAY_SIZE(mcf_devices));
+ return 0;
+}
+
+arch_initcall(mcf_init_devices);
+
diff --git a/arch/m68k/coldfire/dma.c b/arch/m68k/coldfire/dma.c
new file mode 100644
index 000000000000..df5ce20d181c
--- /dev/null
+++ b/arch/m68k/coldfire/dma.c
@@ -0,0 +1,42 @@
+/***************************************************************************/
+
+/*
+ * dma.c -- Freescale ColdFire DMA support
+ *
+ * Copyright (C) 2007, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/dma.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/***************************************************************************/
+
+/*
+ * DMA channel base address table.
+ */
+unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
+#ifdef MCFDMA_BASE0
+ MCFDMA_BASE0,
+#endif
+#ifdef MCFDMA_BASE1
+ MCFDMA_BASE1,
+#endif
+#ifdef MCFDMA_BASE2
+ MCFDMA_BASE2,
+#endif
+#ifdef MCFDMA_BASE3
+ MCFDMA_BASE3,
+#endif
+};
+EXPORT_SYMBOL(dma_base_addr);
+
+unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+EXPORT_SYMBOL(dma_device_address);
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/dma_timer.c b/arch/m68k/coldfire/dma_timer.c
new file mode 100644
index 000000000000..235ad57c4707
--- /dev/null
+++ b/arch/m68k/coldfire/dma_timer.c
@@ -0,0 +1,81 @@
+/*
+ * dma_timer.c -- Freescale ColdFire DMA Timer.
+ *
+ * Copyright (C) 2007, Benedikt Spranger <b.spranger@linutronix.de>
+ * Copyright (C) 2008. Sebastian Siewior, Linutronix
+ *
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfpit.h>
+#include <asm/mcfsim.h>
+
+#define DMA_TIMER_0 (0x00)
+#define DMA_TIMER_1 (0x40)
+#define DMA_TIMER_2 (0x80)
+#define DMA_TIMER_3 (0xc0)
+
+#define DTMR0 (MCF_IPSBAR + DMA_TIMER_0 + 0x400)
+#define DTXMR0 (MCF_IPSBAR + DMA_TIMER_0 + 0x402)
+#define DTER0 (MCF_IPSBAR + DMA_TIMER_0 + 0x403)
+#define DTRR0 (MCF_IPSBAR + DMA_TIMER_0 + 0x404)
+#define DTCR0 (MCF_IPSBAR + DMA_TIMER_0 + 0x408)
+#define DTCN0 (MCF_IPSBAR + DMA_TIMER_0 + 0x40c)
+
+#define DMA_FREQ ((MCF_CLK / 2) / 16)
+
+/* DTMR */
+#define DMA_DTMR_RESTART (1 << 3)
+#define DMA_DTMR_CLK_DIV_1 (1 << 1)
+#define DMA_DTMR_CLK_DIV_16 (2 << 1)
+#define DMA_DTMR_ENABLE (1 << 0)
+
+static cycle_t cf_dt_get_cycles(struct clocksource *cs)
+{
+ return __raw_readl(DTCN0);
+}
+
+static struct clocksource clocksource_cf_dt = {
+ .name = "coldfire_dma_timer",
+ .rating = 200,
+ .read = cf_dt_get_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init init_cf_dt_clocksource(void)
+{
+ /*
+ * We setup DMA timer 0 in free run mode. This incrementing counter is
+ * used as a highly precious clock source. With MCF_CLOCK = 150 MHz we
+ * get a ~213 ns resolution and the 32bit register will overflow almost
+ * every 15 minutes.
+ */
+ __raw_writeb(0x00, DTXMR0);
+ __raw_writeb(0x00, DTER0);
+ __raw_writel(0x00000000, DTRR0);
+ __raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
+ return clocksource_register_hz(&clocksource_cf_dt, DMA_FREQ);
+}
+
+arch_initcall(init_cf_dt_clocksource);
+
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+#define CYC2NS_SCALE ((1000000 << CYC2NS_SCALE_FACTOR) / (DMA_FREQ / 1000))
+
+static unsigned long long cycles2ns(unsigned long cycl)
+{
+ return (unsigned long long) ((unsigned long long)cycl *
+ CYC2NS_SCALE) >> CYC2NS_SCALE_FACTOR;
+}
+
+unsigned long long sched_clock(void)
+{
+ unsigned long cycl = __raw_readl(DTCN0);
+
+ return cycles2ns(cycl);
+}
diff --git a/arch/m68k/coldfire/entry.S b/arch/m68k/coldfire/entry.S
new file mode 100644
index 000000000000..881ab8e379d4
--- /dev/null
+++ b/arch/m68k/coldfire/entry.S
@@ -0,0 +1,203 @@
+/*
+ * linux/arch/m68knommu/platform/5307/entry.S
+ *
+ * Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
+ * Kenneth Albanowski <kjahds@kjahds.com>,
+ * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
+ * Copyright (C) 2004-2006 Macq Electronique SA. (www.macqel.com)
+ *
+ * Based on:
+ *
+ * linux/arch/m68k/kernel/entry.S
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file README.legal in the main directory of this archive
+ * for more details.
+ *
+ * Linux/m68k support by Hamish Macdonald
+ *
+ * 68060 fixes by Jesper Skov
+ * ColdFire support by Greg Ungerer (gerg@snapgear.com)
+ * 5307 fixes by David W. Miller
+ * linux 2.4 support David McCullough <davidm@snapgear.com>
+ * Bug, speed and maintainability fixes by Philippe De Muyter <phdm@macqel.be>
+ */
+
+#include <linux/linkage.h>
+#include <asm/unistd.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/asm-offsets.h>
+#include <asm/entry.h>
+
+#ifdef CONFIG_COLDFIRE_SW_A7
+/*
+ * Define software copies of the supervisor and user stack pointers.
+ */
+.bss
+sw_ksp:
+.long 0
+sw_usp:
+.long 0
+#endif /* CONFIG_COLDFIRE_SW_A7 */
+
+.text
+
+.globl system_call
+.globl resume
+.globl ret_from_exception
+.globl ret_from_signal
+.globl sys_call_table
+.globl inthandler
+
+enosys:
+ mov.l #sys_ni_syscall,%d3
+ bra 1f
+
+ENTRY(system_call)
+ SAVE_ALL_SYS
+ move #0x2000,%sr /* enable intrs again */
+ GET_CURRENT(%d2)
+
+ cmpl #NR_syscalls,%d0
+ jcc enosys
+ lea sys_call_table,%a0
+ lsll #2,%d0 /* movel %a0@(%d0:l:4),%d3 */
+ movel %a0@(%d0),%d3
+ jeq enosys
+
+1:
+ movel %sp,%d2 /* get thread_info pointer */
+ andl #-THREAD_SIZE,%d2 /* at start of kernel stack */
+ movel %d2,%a0
+ movel %a0@,%a1 /* save top of frame */
+ movel %sp,%a1@(TASK_THREAD+THREAD_ESP0)
+ btst #(TIF_SYSCALL_TRACE%8),%a0@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
+ bnes 1f
+
+ movel %d3,%a0
+ jbsr %a0@
+ movel %d0,%sp@(PT_OFF_D0) /* save the return value */
+ jra ret_from_exception
+1:
+ movel #-ENOSYS,%d2 /* strace needs -ENOSYS in PT_OFF_D0 */
+ movel %d2,PT_OFF_D0(%sp) /* on syscall entry */
+ subql #4,%sp
+ SAVE_SWITCH_STACK
+ jbsr syscall_trace_enter
+ RESTORE_SWITCH_STACK
+ addql #4,%sp
+ movel %d3,%a0
+ jbsr %a0@
+ movel %d0,%sp@(PT_OFF_D0) /* save the return value */
+ subql #4,%sp /* dummy return address */
+ SAVE_SWITCH_STACK
+ jbsr syscall_trace_leave
+
+ret_from_signal:
+ RESTORE_SWITCH_STACK
+ addql #4,%sp
+
+ret_from_exception:
+ move #0x2700,%sr /* disable intrs */
+ btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel */
+ jeq Luser_return /* if so, skip resched, signals */
+
+#ifdef CONFIG_PREEMPT
+ movel %sp,%d1 /* get thread_info pointer */
+ andl #-THREAD_SIZE,%d1 /* at base of kernel stack */
+ movel %d1,%a0
+ movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */
+ andl #(1<<TIF_NEED_RESCHED),%d1
+ jeq Lkernel_return
+
+ movel %a0@(TINFO_PREEMPT),%d1
+ cmpl #0,%d1
+ jne Lkernel_return
+
+ pea Lkernel_return
+ jmp preempt_schedule_irq /* preempt the kernel */
+#endif
+
+Lkernel_return:
+ moveml %sp@,%d1-%d5/%a0-%a2
+ lea %sp@(32),%sp /* space for 8 regs */
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stk adj */
+ rte
+
+Luser_return:
+ movel %sp,%d1 /* get thread_info pointer */
+ andl #-THREAD_SIZE,%d1 /* at base of kernel stack */
+ movel %d1,%a0
+ moveb %a0@(TINFO_FLAGS+3),%d1 /* thread_info->flags (low 8 bits) */
+ jne Lwork_to_do /* still work to do */
+
+Lreturn:
+ RESTORE_USER
+
+Lwork_to_do:
+ movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */
+ move #0x2000,%sr /* enable intrs again */
+ btst #TIF_NEED_RESCHED,%d1
+ jne reschedule
+
+Lsignal_return:
+ subql #4,%sp /* dummy return address */
+ SAVE_SWITCH_STACK
+ pea %sp@(SWITCH_STACK_SIZE)
+ jsr do_notify_resume
+ addql #4,%sp
+ RESTORE_SWITCH_STACK
+ addql #4,%sp
+ jmp Luser_return
+
+/*
+ * This is the generic interrupt handler (for all hardware interrupt
+ * sources). Calls up to high level code to do all the work.
+ */
+ENTRY(inthandler)
+ SAVE_ALL_INT
+ GET_CURRENT(%d2)
+
+ movew %sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
+ andl #0x03fc,%d0 /* mask out vector only */
+
+ movel %sp,%sp@- /* push regs arg */
+ lsrl #2,%d0 /* calculate real vector # */
+ movel %d0,%sp@- /* push vector number */
+ jbsr do_IRQ /* call high level irq handler */
+ lea %sp@(8),%sp /* pop args off stack */
+
+ bra ret_from_exception
+
+/*
+ * Beware - when entering resume, prev (the current task) is
+ * in a0, next (the new task) is in a1, so don't change these
+ * registers until their contents are no longer needed.
+ */
+ENTRY(resume)
+ movew %sr,%d1 /* save current status */
+ movew %d1,%a0@(TASK_THREAD+THREAD_SR)
+ movel %a0,%d1 /* get prev thread in d1 */
+ SAVE_SWITCH_STACK
+ movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack pointer */
+ RDUSP /* movel %usp,%a3 */
+ movel %a3,%a0@(TASK_THREAD+THREAD_USP) /* save thread user stack */
+#ifdef CONFIG_MMU
+ movel %a1,%a2 /* set new current */
+#endif
+ movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore thread user stack */
+ WRUSP /* movel %a3,%usp */
+ movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new kernel stack */
+ movew %a1@(TASK_THREAD+THREAD_SR),%d7 /* restore new status */
+ movew %d7,%sr
+ RESTORE_SWITCH_STACK
+ rts
+
diff --git a/arch/m68k/coldfire/firebee.c b/arch/m68k/coldfire/firebee.c
new file mode 100644
index 000000000000..46d50534f981
--- /dev/null
+++ b/arch/m68k/coldfire/firebee.c
@@ -0,0 +1,86 @@
+/***************************************************************************/
+
+/*
+ * firebee.c -- extra startup code support for the FireBee boards
+ *
+ * Copyright (C) 2011, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+/*
+ * 8MB of NOR flash fitted to the FireBee board.
+ */
+#define FLASH_PHYS_ADDR 0xe0000000 /* Physical address of flash */
+#define FLASH_PHYS_SIZE 0x00800000 /* Size of flash */
+
+#define PART_BOOT_START 0x00000000 /* Start at bottom of flash */
+#define PART_BOOT_SIZE 0x00040000 /* 256k in size */
+#define PART_IMAGE_START 0x00040000 /* Start after boot loader */
+#define PART_IMAGE_SIZE 0x006c0000 /* Most of flash */
+#define PART_FPGA_START 0x00700000 /* Start at offset 7MB */
+#define PART_FPGA_SIZE 0x00100000 /* 1MB in size */
+
+static struct mtd_partition firebee_flash_parts[] = {
+ {
+ .name = "dBUG",
+ .offset = PART_BOOT_START,
+ .size = PART_BOOT_SIZE,
+ },
+ {
+ .name = "FPGA",
+ .offset = PART_FPGA_START,
+ .size = PART_FPGA_SIZE,
+ },
+ {
+ .name = "image",
+ .offset = PART_IMAGE_START,
+ .size = PART_IMAGE_SIZE,
+ },
+};
+
+static struct physmap_flash_data firebee_flash_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(firebee_flash_parts),
+ .parts = firebee_flash_parts,
+};
+
+static struct resource firebee_flash_resource = {
+ .start = FLASH_PHYS_ADDR,
+ .end = FLASH_PHYS_ADDR + FLASH_PHYS_SIZE,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device firebee_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &firebee_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &firebee_flash_resource,
+};
+
+/***************************************************************************/
+
+static int __init init_firebee(void)
+{
+ platform_device_register(&firebee_flash);
+ return 0;
+}
+
+arch_initcall(init_firebee);
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/gpio.c b/arch/m68k/coldfire/gpio.c
new file mode 100644
index 000000000000..e7e428681ec5
--- /dev/null
+++ b/arch/m68k/coldfire/gpio.c
@@ -0,0 +1,186 @@
+/*
+ * Coldfire generic GPIO support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+int __mcfgpio_get_value(unsigned gpio)
+{
+ return mcfgpio_read(__mcfgpio_ppdr(gpio)) & mcfgpio_bit(gpio);
+}
+EXPORT_SYMBOL(__mcfgpio_get_value);
+
+void __mcfgpio_set_value(unsigned gpio, int value)
+{
+ if (gpio < MCFGPIO_SCR_START) {
+ unsigned long flags;
+ MCFGPIO_PORTTYPE data;
+
+ local_irq_save(flags);
+ data = mcfgpio_read(__mcfgpio_podr(gpio));
+ if (value)
+ data |= mcfgpio_bit(gpio);
+ else
+ data &= ~mcfgpio_bit(gpio);
+ mcfgpio_write(data, __mcfgpio_podr(gpio));
+ local_irq_restore(flags);
+ } else {
+ if (value)
+ mcfgpio_write(mcfgpio_bit(gpio),
+ MCFGPIO_SETR_PORT(gpio));
+ else
+ mcfgpio_write(~mcfgpio_bit(gpio),
+ MCFGPIO_CLRR_PORT(gpio));
+ }
+}
+EXPORT_SYMBOL(__mcfgpio_set_value);
+
+int __mcfgpio_direction_input(unsigned gpio)
+{
+ unsigned long flags;
+ MCFGPIO_PORTTYPE dir;
+
+ local_irq_save(flags);
+ dir = mcfgpio_read(__mcfgpio_pddr(gpio));
+ dir &= ~mcfgpio_bit(gpio);
+ mcfgpio_write(dir, __mcfgpio_pddr(gpio));
+ local_irq_restore(flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(__mcfgpio_direction_input);
+
+int __mcfgpio_direction_output(unsigned gpio, int value)
+{
+ unsigned long flags;
+ MCFGPIO_PORTTYPE data;
+
+ local_irq_save(flags);
+ data = mcfgpio_read(__mcfgpio_pddr(gpio));
+ data |= mcfgpio_bit(gpio);
+ mcfgpio_write(data, __mcfgpio_pddr(gpio));
+
+ /* now set the data to output */
+ if (gpio < MCFGPIO_SCR_START) {
+ data = mcfgpio_read(__mcfgpio_podr(gpio));
+ if (value)
+ data |= mcfgpio_bit(gpio);
+ else
+ data &= ~mcfgpio_bit(gpio);
+ mcfgpio_write(data, __mcfgpio_podr(gpio));
+ } else {
+ if (value)
+ mcfgpio_write(mcfgpio_bit(gpio),
+ MCFGPIO_SETR_PORT(gpio));
+ else
+ mcfgpio_write(~mcfgpio_bit(gpio),
+ MCFGPIO_CLRR_PORT(gpio));
+ }
+ local_irq_restore(flags);
+ return 0;
+}
+EXPORT_SYMBOL(__mcfgpio_direction_output);
+
+int __mcfgpio_request(unsigned gpio)
+{
+ return 0;
+}
+EXPORT_SYMBOL(__mcfgpio_request);
+
+void __mcfgpio_free(unsigned gpio)
+{
+ __mcfgpio_direction_input(gpio);
+}
+EXPORT_SYMBOL(__mcfgpio_free);
+
+#ifdef CONFIG_GPIOLIB
+
+static int mcfgpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return __mcfgpio_direction_input(offset);
+}
+
+static int mcfgpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+ return __mcfgpio_get_value(offset);
+}
+
+static int mcfgpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ return __mcfgpio_direction_output(offset, value);
+}
+
+static void mcfgpio_set_value(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ __mcfgpio_set_value(offset, value);
+}
+
+static int mcfgpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return __mcfgpio_request(offset);
+}
+
+static void mcfgpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ __mcfgpio_free(offset);
+}
+
+static int mcfgpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+#if defined(MCFGPIO_IRQ_MIN)
+ if ((offset >= MCFGPIO_IRQ_MIN) && (offset < MCFGPIO_IRQ_MAX))
+#else
+ if (offset < MCFGPIO_IRQ_MAX)
+#endif
+ return MCFGPIO_IRQ_VECBASE + offset;
+ else
+ return -EINVAL;
+}
+
+static struct bus_type mcfgpio_subsys = {
+ .name = "gpio",
+ .dev_name = "gpio",
+};
+
+static struct gpio_chip mcfgpio_chip = {
+ .label = "mcfgpio",
+ .request = mcfgpio_request,
+ .free = mcfgpio_free,
+ .direction_input = mcfgpio_direction_input,
+ .direction_output = mcfgpio_direction_output,
+ .get = mcfgpio_get_value,
+ .set = mcfgpio_set_value,
+ .to_irq = mcfgpio_to_irq,
+ .base = 0,
+ .ngpio = MCFGPIO_PIN_MAX,
+};
+
+static int __init mcfgpio_sysinit(void)
+{
+ gpiochip_add(&mcfgpio_chip);
+ return subsys_system_register(&mcfgpio_subsys, NULL);
+}
+
+core_initcall(mcfgpio_sysinit);
+#endif
diff --git a/arch/m68k/coldfire/head.S b/arch/m68k/coldfire/head.S
new file mode 100644
index 000000000000..fa31be297b85
--- /dev/null
+++ b/arch/m68k/coldfire/head.S
@@ -0,0 +1,298 @@
+/*****************************************************************************/
+
+/*
+ * head.S -- common startup code for ColdFire CPUs.
+ *
+ * (C) Copyright 1999-2011, Greg Ungerer <gerg@snapgear.com>.
+ */
+
+/*****************************************************************************/
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfmmu.h>
+#include <asm/thread_info.h>
+
+/*****************************************************************************/
+
+/*
+ * If we don't have a fixed memory size, then lets build in code
+ * to auto detect the DRAM size. Obviously this is the preferred
+ * method, and should work for most boards. It won't work for those
+ * that do not have their RAM starting at address 0, and it only
+ * works on SDRAM (not boards fitted with SRAM).
+ */
+#if CONFIG_RAMSIZE != 0
+.macro GET_MEM_SIZE
+ movel #CONFIG_RAMSIZE,%d0 /* hard coded memory size */
+.endm
+
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M5249) || defined(CONFIG_M525x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
+/*
+ * Not all these devices have exactly the same DRAM controller,
+ * but the DCMR register is virtually identical - give or take
+ * a couple of bits. The only exception is the 5272 devices, their
+ * DRAM controller is quite different.
+ */
+.macro GET_MEM_SIZE
+ movel MCFSIM_DMR0,%d0 /* get mask for 1st bank */
+ btst #0,%d0 /* check if region enabled */
+ beq 1f
+ andl #0xfffc0000,%d0
+ beq 1f
+ addl #0x00040000,%d0 /* convert mask to size */
+1:
+ movel MCFSIM_DMR1,%d1 /* get mask for 2nd bank */
+ btst #0,%d1 /* check if region enabled */
+ beq 2f
+ andl #0xfffc0000,%d1
+ beq 2f
+ addl #0x00040000,%d1
+ addl %d1,%d0 /* total mem size in d0 */
+2:
+.endm
+
+#elif defined(CONFIG_M5272)
+.macro GET_MEM_SIZE
+ movel MCFSIM_CSOR7,%d0 /* get SDRAM address mask */
+ andil #0xfffff000,%d0 /* mask out chip select options */
+ negl %d0 /* negate bits */
+.endm
+
+#elif defined(CONFIG_M520x)
+.macro GET_MEM_SIZE
+ clrl %d0
+ movel MCFSIM_SDCS0, %d2 /* Get SDRAM chip select 0 config */
+ andl #0x1f, %d2 /* Get only the chip select size */
+ beq 3f /* Check if it is enabled */
+ addql #1, %d2 /* Form exponent */
+ moveql #1, %d0
+ lsll %d2, %d0 /* 2 ^ exponent */
+3:
+ movel MCFSIM_SDCS1, %d2 /* Get SDRAM chip select 1 config */
+ andl #0x1f, %d2 /* Get only the chip select size */
+ beq 4f /* Check if it is enabled */
+ addql #1, %d2 /* Form exponent */
+ moveql #1, %d1
+ lsll %d2, %d1 /* 2 ^ exponent */
+ addl %d1, %d0 /* Total size of SDRAM in d0 */
+4:
+.endm
+
+#else
+#error "ERROR: I don't know how to probe your boards memory size?"
+#endif
+
+/*****************************************************************************/
+
+/*
+ * Boards and platforms can do specific early hardware setup if
+ * they need to. Most don't need this, define away if not required.
+ */
+#ifndef PLATFORM_SETUP
+#define PLATFORM_SETUP
+#endif
+
+/*****************************************************************************/
+
+.global _start
+.global _rambase
+.global _ramvec
+.global _ramstart
+.global _ramend
+#if defined(CONFIG_UBOOT)
+.global _init_sp
+#endif
+
+/*****************************************************************************/
+
+.data
+
+/*
+ * During startup we store away the RAM setup. These are not in the
+ * bss, since their values are determined and written before the bss
+ * has been cleared.
+ */
+_rambase:
+.long 0
+_ramvec:
+.long 0
+_ramstart:
+.long 0
+_ramend:
+.long 0
+#if defined(CONFIG_UBOOT)
+_init_sp:
+.long 0
+#endif
+
+/*****************************************************************************/
+
+__HEAD
+
+#ifdef CONFIG_MMU
+_start0:
+ jmp _start
+.global kernel_pg_dir
+.equ kernel_pg_dir,_start0
+.equ .,_start0+0x1000
+#endif
+
+/*
+ * This is the codes first entry point. This is where it all
+ * begins...
+ */
+
+_start:
+ nop /* filler */
+ movew #0x2700, %sr /* no interrupts */
+ movel #CACHE_INIT,%d0 /* disable cache */
+ movec %d0,%CACR
+ nop
+#if defined(CONFIG_UBOOT)
+ movel %sp,_init_sp /* save initial stack pointer */
+#endif
+#ifdef CONFIG_MBAR
+ movel #CONFIG_MBAR+1,%d0 /* configured MBAR address */
+ movec %d0,%MBAR /* set it */
+#endif
+
+ /*
+ * Do any platform or board specific setup now. Most boards
+ * don't need anything. Those exceptions are define this in
+ * their board specific includes.
+ */
+ PLATFORM_SETUP
+
+ /*
+ * Create basic memory configuration. Set VBR accordingly,
+ * and size memory.
+ */
+ movel #CONFIG_VECTORBASE,%a7
+ movec %a7,%VBR /* set vectors addr */
+ movel %a7,_ramvec
+
+ movel #CONFIG_RAMBASE,%a7 /* mark the base of RAM */
+ movel %a7,_rambase
+
+ GET_MEM_SIZE /* macro code determines size */
+ addl %a7,%d0
+ movel %d0,_ramend /* set end ram addr */
+
+ /*
+ * Now that we know what the memory is, lets enable cache
+ * and get things moving. This is Coldfire CPU specific. Not
+ * all version cores have identical cache register setup. But
+ * it is very similar. Define the exact settings in the headers
+ * then the code here is the same for all.
+ */
+ movel #ACR0_MODE,%d0 /* set RAM region for caching */
+ movec %d0,%ACR0
+ movel #ACR1_MODE,%d0 /* anything else to cache? */
+ movec %d0,%ACR1
+#ifdef ACR2_MODE
+ movel #ACR2_MODE,%d0
+ movec %d0,%ACR2
+ movel #ACR3_MODE,%d0
+ movec %d0,%ACR3
+#endif
+ movel #CACHE_MODE,%d0 /* enable cache */
+ movec %d0,%CACR
+ nop
+
+#ifdef CONFIG_MMU
+ /*
+ * Identity mapping for the kernel region.
+ */
+ movel #(MMUBASE+1),%d0 /* enable MMUBAR registers */
+ movec %d0,%MMUBAR
+ movel #MMUOR_CA,%d0 /* clear TLB entries */
+ movel %d0,MMUOR
+ movel #0,%d0 /* set ASID to 0 */
+ movec %d0,%asid
+
+ movel #MMUCR_EN,%d0 /* Enable the identity map */
+ movel %d0,MMUCR
+ nop /* sync i-pipeline */
+
+ movel #_vstart,%a0 /* jump to "virtual" space */
+ jmp %a0@
+_vstart:
+#endif /* CONFIG_MMU */
+
+#ifdef CONFIG_ROMFS_FS
+ /*
+ * Move ROM filesystem above bss :-)
+ */
+ lea __bss_start,%a0 /* get start of bss */
+ lea __bss_stop,%a1 /* set up destination */
+ movel %a0,%a2 /* copy of bss start */
+
+ movel 8(%a0),%d0 /* get size of ROMFS */
+ addql #8,%d0 /* allow for rounding */
+ andl #0xfffffffc, %d0 /* whole words */
+
+ addl %d0,%a0 /* copy from end */
+ addl %d0,%a1 /* copy from end */
+ movel %a1,_ramstart /* set start of ram */
+
+_copy_romfs:
+ movel -(%a0),%d0 /* copy dword */
+ movel %d0,-(%a1)
+ cmpl %a0,%a2 /* check if at end */
+ bne _copy_romfs
+
+#else /* CONFIG_ROMFS_FS */
+ lea __bss_stop,%a1
+ movel %a1,_ramstart
+#endif /* CONFIG_ROMFS_FS */
+
+
+ /*
+ * Zero out the bss region.
+ */
+ lea __bss_start,%a0 /* get start of bss */
+ lea __bss_stop,%a1 /* get end of bss */
+ clrl %d0 /* set value */
+_clear_bss:
+ movel %d0,(%a0)+ /* clear each word */
+ cmpl %a0,%a1 /* check if at end */
+ bne _clear_bss
+
+ /*
+ * Load the current task pointer and stack.
+ */
+ lea init_thread_union,%a0
+ lea THREAD_SIZE(%a0),%sp
+
+#ifdef CONFIG_MMU
+.global m68k_cputype
+.global m68k_mmutype
+.global m68k_fputype
+.global m68k_machtype
+ movel #CPU_COLDFIRE,%d0
+ movel %d0,m68k_cputype /* Mark us as a ColdFire */
+ movel #MMU_COLDFIRE,%d0
+ movel %d0,m68k_mmutype
+ movel #FPU_COLDFIRE,%d0
+ movel %d0,m68k_fputype
+ movel #MACH_M54XX,%d0
+ movel %d0,m68k_machtype /* Mark us as a 54xx machine */
+ lea init_task,%a2 /* Set "current" init task */
+#endif
+
+ /*
+ * Assember start up done, start code proper.
+ */
+ jsr start_kernel /* start Linux kernel */
+
+_exit:
+ jmp _exit /* should never get here */
+
+/*****************************************************************************/
diff --git a/arch/m68k/coldfire/intc-2.c b/arch/m68k/coldfire/intc-2.c
new file mode 100644
index 000000000000..995093357c59
--- /dev/null
+++ b/arch/m68k/coldfire/intc-2.c
@@ -0,0 +1,212 @@
+/*
+ * intc-2.c
+ *
+ * General interrupt controller code for the many ColdFire cores that use
+ * interrupt controllers with 63 interrupt sources, organized as 56 fully-
+ * programmable + 7 fixed-level interrupt sources. This includes the 523x
+ * family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
+ * controllers, and the 547x and 548x families which have only one of them.
+ *
+ * The external 7 fixed interrupts are part the the Edge Port unit of these
+ * ColdFire parts. They can be configured as level or edge triggered.
+ *
+ * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ * Bit definitions for the ICR family of registers.
+ */
+#define MCFSIM_ICR_LEVEL(l) ((l)<<3) /* Level l intr */
+#define MCFSIM_ICR_PRI(p) (p) /* Priority p intr */
+
+/*
+ * The EDGE Port interrupts are the fixed 7 external interrupts.
+ * They need some special treatment, for example they need to be acked.
+ */
+#define EINT0 64 /* Is not actually used, but spot reserved for it */
+#define EINT1 65 /* EDGE Port interrupt 1 */
+#define EINT7 71 /* EDGE Port interrupt 7 */
+
+#ifdef MCFICM_INTC1
+#define NR_VECS 128
+#else
+#define NR_VECS 64
+#endif
+
+static void intc_irq_mask(struct irq_data *d)
+{
+ unsigned int irq = d->irq - MCFINT_VECBASE;
+ unsigned long imraddr;
+ u32 val, imrbit;
+
+#ifdef MCFICM_INTC1
+ imraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+ imraddr = MCFICM_INTC0;
+#endif
+ imraddr += (irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL;
+ imrbit = 0x1 << (irq & 0x1f);
+
+ val = __raw_readl(imraddr);
+ __raw_writel(val | imrbit, imraddr);
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+ unsigned int irq = d->irq - MCFINT_VECBASE;
+ unsigned long imraddr;
+ u32 val, imrbit;
+
+#ifdef MCFICM_INTC1
+ imraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+ imraddr = MCFICM_INTC0;
+#endif
+ imraddr += ((irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL);
+ imrbit = 0x1 << (irq & 0x1f);
+
+ /* Don't set the "maskall" bit! */
+ if ((irq & 0x20) == 0)
+ imrbit |= 0x1;
+
+ val = __raw_readl(imraddr);
+ __raw_writel(val & ~imrbit, imraddr);
+}
+
+/*
+ * Only the external (or EDGE Port) interrupts need to be acknowledged
+ * here, as part of the IRQ handler. They only really need to be ack'ed
+ * if they are in edge triggered mode, but there is no harm in doing it
+ * for all types.
+ */
+static void intc_irq_ack(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+
+ __raw_writeb(0x1 << (irq - EINT0), MCFEPORT_EPFR);
+}
+
+/*
+ * Each vector needs a unique priority and level associated with it.
+ * We don't really care so much what they are, we don't rely on the
+ * traditional priority interrupt scheme of the m68k/ColdFire. This
+ * only needs to be set once for an interrupt, and we will never change
+ * these values once we have set them.
+ */
+static u8 intc_intpri = MCFSIM_ICR_LEVEL(6) | MCFSIM_ICR_PRI(6);
+
+static unsigned int intc_irq_startup(struct irq_data *d)
+{
+ unsigned int irq = d->irq - MCFINT_VECBASE;
+ unsigned long icraddr;
+
+#ifdef MCFICM_INTC1
+ icraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+#else
+ icraddr = MCFICM_INTC0;
+#endif
+ icraddr += MCFINTC_ICR0 + (irq & 0x3f);
+ if (__raw_readb(icraddr) == 0)
+ __raw_writeb(intc_intpri--, icraddr);
+
+ irq = d->irq;
+ if ((irq >= EINT1) && (irq <= EINT7)) {
+ u8 v;
+
+ irq -= EINT0;
+
+ /* Set EPORT line as input */
+ v = __raw_readb(MCFEPORT_EPDDR);
+ __raw_writeb(v & ~(0x1 << irq), MCFEPORT_EPDDR);
+
+ /* Set EPORT line as interrupt source */
+ v = __raw_readb(MCFEPORT_EPIER);
+ __raw_writeb(v | (0x1 << irq), MCFEPORT_EPIER);
+ }
+
+ intc_irq_unmask(d);
+ return 0;
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ unsigned int irq = d->irq;
+ u16 pa, tb;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ tb = 0x1;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ tb = 0x2;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ tb = 0x3;
+ break;
+ default:
+ /* Level triggered */
+ tb = 0;
+ break;
+ }
+
+ if (tb)
+ irq_set_handler(irq, handle_edge_irq);
+
+ irq -= EINT0;
+ pa = __raw_readw(MCFEPORT_EPPAR);
+ pa = (pa & ~(0x3 << (irq * 2))) | (tb << (irq * 2));
+ __raw_writew(pa, MCFEPORT_EPPAR);
+
+ return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+ .name = "CF-INTC",
+ .irq_startup = intc_irq_startup,
+ .irq_mask = intc_irq_mask,
+ .irq_unmask = intc_irq_unmask,
+};
+
+static struct irq_chip intc_irq_chip_edge_port = {
+ .name = "CF-INTC-EP",
+ .irq_startup = intc_irq_startup,
+ .irq_mask = intc_irq_mask,
+ .irq_unmask = intc_irq_unmask,
+ .irq_ack = intc_irq_ack,
+ .irq_set_type = intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+ int irq;
+
+ /* Mask all interrupt sources */
+ __raw_writel(0x1, MCFICM_INTC0 + MCFINTC_IMRL);
+#ifdef MCFICM_INTC1
+ __raw_writel(0x1, MCFICM_INTC1 + MCFINTC_IMRL);
+#endif
+
+ for (irq = MCFINT_VECBASE; (irq < MCFINT_VECBASE + NR_VECS); irq++) {
+ if ((irq >= EINT1) && (irq <=EINT7))
+ irq_set_chip(irq, &intc_irq_chip_edge_port);
+ else
+ irq_set_chip(irq, &intc_irq_chip);
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+ irq_set_handler(irq, handle_level_irq);
+ }
+}
+
diff --git a/arch/m68k/coldfire/intc-5249.c b/arch/m68k/coldfire/intc-5249.c
new file mode 100644
index 000000000000..b0d1641053e4
--- /dev/null
+++ b/arch/m68k/coldfire/intc-5249.c
@@ -0,0 +1,61 @@
+/*
+ * intc2.c -- support for the 2nd INTC controller of the 5249
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+static void intc2_irq_gpio_mask(struct irq_data *d)
+{
+ u32 imr;
+ imr = readl(MCFSIM2_GPIOINTENABLE);
+ imr &= ~(0x1 << (d->irq - MCF_IRQ_GPIO0));
+ writel(imr, MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_unmask(struct irq_data *d)
+{
+ u32 imr;
+ imr = readl(MCFSIM2_GPIOINTENABLE);
+ imr |= (0x1 << (d->irq - MCF_IRQ_GPIO0));
+ writel(imr, MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_ack(struct irq_data *d)
+{
+ writel(0x1 << (d->irq - MCF_IRQ_GPIO0), MCFSIM2_GPIOINTCLEAR);
+}
+
+static struct irq_chip intc2_irq_gpio_chip = {
+ .name = "CF-INTC2",
+ .irq_mask = intc2_irq_gpio_mask,
+ .irq_unmask = intc2_irq_gpio_unmask,
+ .irq_ack = intc2_irq_gpio_ack,
+};
+
+static int __init mcf_intc2_init(void)
+{
+ int irq;
+
+ /* GPIO interrupt sources */
+ for (irq = MCF_IRQ_GPIO0; (irq <= MCF_IRQ_GPIO7); irq++) {
+ irq_set_chip(irq, &intc2_irq_gpio_chip);
+ irq_set_handler(irq, handle_edge_irq);
+ }
+
+ return 0;
+}
+
+arch_initcall(mcf_intc2_init);
diff --git a/arch/m68k/coldfire/intc-525x.c b/arch/m68k/coldfire/intc-525x.c
new file mode 100644
index 000000000000..b23204d059ac
--- /dev/null
+++ b/arch/m68k/coldfire/intc-525x.c
@@ -0,0 +1,91 @@
+/*
+ * intc2.c -- support for the 2nd INTC controller of the 525x
+ *
+ * (C) Copyright 2012, Steven King <sfking@fdwdc.com>
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+static void intc2_irq_gpio_mask(struct irq_data *d)
+{
+ u32 imr = readl(MCFSIM2_GPIOINTENABLE);
+ u32 type = irqd_get_trigger_type(d);
+ int irq = d->irq - MCF_IRQ_GPIO0;
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ imr &= ~(0x001 << irq);
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ imr &= ~(0x100 << irq);
+ writel(imr, MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_unmask(struct irq_data *d)
+{
+ u32 imr = readl(MCFSIM2_GPIOINTENABLE);
+ u32 type = irqd_get_trigger_type(d);
+ int irq = d->irq - MCF_IRQ_GPIO0;
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ imr |= (0x001 << irq);
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ imr |= (0x100 << irq);
+ writel(imr, MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_ack(struct irq_data *d)
+{
+ u32 imr = 0;
+ u32 type = irqd_get_trigger_type(d);
+ int irq = d->irq - MCF_IRQ_GPIO0;
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ imr |= (0x001 << irq);
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ imr |= (0x100 << irq);
+ writel(imr, MCFSIM2_GPIOINTCLEAR);
+}
+
+static int intc2_irq_gpio_set_type(struct irq_data *d, unsigned int f)
+{
+ if (f & ~IRQ_TYPE_EDGE_BOTH)
+ return -EINVAL;
+ return 0;
+}
+
+static struct irq_chip intc2_irq_gpio_chip = {
+ .name = "CF-INTC2",
+ .irq_mask = intc2_irq_gpio_mask,
+ .irq_unmask = intc2_irq_gpio_unmask,
+ .irq_ack = intc2_irq_gpio_ack,
+ .irq_set_type = intc2_irq_gpio_set_type,
+};
+
+static int __init mcf_intc2_init(void)
+{
+ int irq;
+
+ /* set the interrupt base for the second interrupt controller */
+ writel(MCFINTC2_VECBASE, MCFINTC2_INTBASE);
+
+ /* GPIO interrupt sources */
+ for (irq = MCF_IRQ_GPIO0; (irq <= MCF_IRQ_GPIO6); irq++) {
+ irq_set_chip(irq, &intc2_irq_gpio_chip);
+ irq_set_handler(irq, handle_edge_irq);
+ }
+
+ return 0;
+}
+
+arch_initcall(mcf_intc2_init);
diff --git a/arch/m68k/coldfire/intc-5272.c b/arch/m68k/coldfire/intc-5272.c
new file mode 100644
index 000000000000..d7b695629a7e
--- /dev/null
+++ b/arch/m68k/coldfire/intc-5272.c
@@ -0,0 +1,185 @@
+/*
+ * intc.c -- interrupt controller or ColdFire 5272 SoC
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ * The 5272 ColdFire interrupt controller is nothing like any other
+ * ColdFire interrupt controller - it truly is completely different.
+ * Given its age it is unlikely to be used on any other ColdFire CPU.
+ */
+
+/*
+ * The masking and priproty setting of interrupts on the 5272 is done
+ * via a set of 4 "Interrupt Controller Registers" (ICR). There is a
+ * loose mapping of vector number to register and internal bits, but
+ * a table is the easiest and quickest way to map them.
+ *
+ * Note that the external interrupts are edge triggered (unlike the
+ * internal interrupt sources which are level triggered). Which means
+ * they also need acknowledging via acknowledge bits.
+ */
+struct irqmap {
+ unsigned char icr;
+ unsigned char index;
+ unsigned char ack;
+};
+
+static struct irqmap intc_irqmap[MCFINT_VECMAX - MCFINT_VECBASE] = {
+ /*MCF_IRQ_SPURIOUS*/ { .icr = 0, .index = 0, .ack = 0, },
+ /*MCF_IRQ_EINT1*/ { .icr = MCFSIM_ICR1, .index = 28, .ack = 1, },
+ /*MCF_IRQ_EINT2*/ { .icr = MCFSIM_ICR1, .index = 24, .ack = 1, },
+ /*MCF_IRQ_EINT3*/ { .icr = MCFSIM_ICR1, .index = 20, .ack = 1, },
+ /*MCF_IRQ_EINT4*/ { .icr = MCFSIM_ICR1, .index = 16, .ack = 1, },
+ /*MCF_IRQ_TIMER1*/ { .icr = MCFSIM_ICR1, .index = 12, .ack = 0, },
+ /*MCF_IRQ_TIMER2*/ { .icr = MCFSIM_ICR1, .index = 8, .ack = 0, },
+ /*MCF_IRQ_TIMER3*/ { .icr = MCFSIM_ICR1, .index = 4, .ack = 0, },
+ /*MCF_IRQ_TIMER4*/ { .icr = MCFSIM_ICR1, .index = 0, .ack = 0, },
+ /*MCF_IRQ_UART1*/ { .icr = MCFSIM_ICR2, .index = 28, .ack = 0, },
+ /*MCF_IRQ_UART2*/ { .icr = MCFSIM_ICR2, .index = 24, .ack = 0, },
+ /*MCF_IRQ_PLIP*/ { .icr = MCFSIM_ICR2, .index = 20, .ack = 0, },
+ /*MCF_IRQ_PLIA*/ { .icr = MCFSIM_ICR2, .index = 16, .ack = 0, },
+ /*MCF_IRQ_USB0*/ { .icr = MCFSIM_ICR2, .index = 12, .ack = 0, },
+ /*MCF_IRQ_USB1*/ { .icr = MCFSIM_ICR2, .index = 8, .ack = 0, },
+ /*MCF_IRQ_USB2*/ { .icr = MCFSIM_ICR2, .index = 4, .ack = 0, },
+ /*MCF_IRQ_USB3*/ { .icr = MCFSIM_ICR2, .index = 0, .ack = 0, },
+ /*MCF_IRQ_USB4*/ { .icr = MCFSIM_ICR3, .index = 28, .ack = 0, },
+ /*MCF_IRQ_USB5*/ { .icr = MCFSIM_ICR3, .index = 24, .ack = 0, },
+ /*MCF_IRQ_USB6*/ { .icr = MCFSIM_ICR3, .index = 20, .ack = 0, },
+ /*MCF_IRQ_USB7*/ { .icr = MCFSIM_ICR3, .index = 16, .ack = 0, },
+ /*MCF_IRQ_DMA*/ { .icr = MCFSIM_ICR3, .index = 12, .ack = 0, },
+ /*MCF_IRQ_ERX*/ { .icr = MCFSIM_ICR3, .index = 8, .ack = 0, },
+ /*MCF_IRQ_ETX*/ { .icr = MCFSIM_ICR3, .index = 4, .ack = 0, },
+ /*MCF_IRQ_ENTC*/ { .icr = MCFSIM_ICR3, .index = 0, .ack = 0, },
+ /*MCF_IRQ_QSPI*/ { .icr = MCFSIM_ICR4, .index = 28, .ack = 0, },
+ /*MCF_IRQ_EINT5*/ { .icr = MCFSIM_ICR4, .index = 24, .ack = 1, },
+ /*MCF_IRQ_EINT6*/ { .icr = MCFSIM_ICR4, .index = 20, .ack = 1, },
+ /*MCF_IRQ_SWTO*/ { .icr = MCFSIM_ICR4, .index = 16, .ack = 0, },
+};
+
+/*
+ * The act of masking the interrupt also has a side effect of 'ack'ing
+ * an interrupt on this irq (for the external irqs). So this mask function
+ * is also an ack_mask function.
+ */
+static void intc_irq_mask(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+ u32 v;
+ irq -= MCFINT_VECBASE;
+ v = 0x8 << intc_irqmap[irq].index;
+ writel(v, intc_irqmap[irq].icr);
+ }
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+ u32 v;
+ irq -= MCFINT_VECBASE;
+ v = 0xd << intc_irqmap[irq].index;
+ writel(v, intc_irqmap[irq].icr);
+ }
+}
+
+static void intc_irq_ack(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+
+ /* Only external interrupts are acked */
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+ irq -= MCFINT_VECBASE;
+ if (intc_irqmap[irq].ack) {
+ u32 v;
+ v = readl(intc_irqmap[irq].icr);
+ v &= (0x7 << intc_irqmap[irq].index);
+ v |= (0x8 << intc_irqmap[irq].index);
+ writel(v, intc_irqmap[irq].icr);
+ }
+ }
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ unsigned int irq = d->irq;
+
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+ irq -= MCFINT_VECBASE;
+ if (intc_irqmap[irq].ack) {
+ u32 v;
+ v = readl(MCFSIM_PITR);
+ if (type == IRQ_TYPE_EDGE_FALLING)
+ v &= ~(0x1 << (32 - irq));
+ else
+ v |= (0x1 << (32 - irq));
+ writel(v, MCFSIM_PITR);
+ }
+ }
+ return 0;
+}
+
+/*
+ * Simple flow handler to deal with the external edge triggered interrupts.
+ * We need to be careful with the masking/acking due to the side effects
+ * of masking an interrupt.
+ */
+static void intc_external_irq(unsigned int irq, struct irq_desc *desc)
+{
+ irq_desc_get_chip(desc)->irq_ack(&desc->irq_data);
+ handle_simple_irq(irq, desc);
+}
+
+static struct irq_chip intc_irq_chip = {
+ .name = "CF-INTC",
+ .irq_mask = intc_irq_mask,
+ .irq_unmask = intc_irq_unmask,
+ .irq_mask_ack = intc_irq_mask,
+ .irq_ack = intc_irq_ack,
+ .irq_set_type = intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+ int irq, edge;
+
+ /* Mask all interrupt sources */
+ writel(0x88888888, MCFSIM_ICR1);
+ writel(0x88888888, MCFSIM_ICR2);
+ writel(0x88888888, MCFSIM_ICR3);
+ writel(0x88888888, MCFSIM_ICR4);
+
+ for (irq = 0; (irq < NR_IRQS); irq++) {
+ irq_set_chip(irq, &intc_irq_chip);
+ edge = 0;
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX))
+ edge = intc_irqmap[irq - MCFINT_VECBASE].ack;
+ if (edge) {
+ irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+ irq_set_handler(irq, intc_external_irq);
+ } else {
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+ irq_set_handler(irq, handle_level_irq);
+ }
+ }
+}
+
diff --git a/arch/m68k/coldfire/intc-simr.c b/arch/m68k/coldfire/intc-simr.c
new file mode 100644
index 000000000000..7cf2c156f72d
--- /dev/null
+++ b/arch/m68k/coldfire/intc-simr.c
@@ -0,0 +1,199 @@
+/*
+ * intc-simr.c
+ *
+ * Interrupt controller code for the ColdFire 5208, 5207 & 532x parts.
+ *
+ * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ * The EDGE Port interrupts are the fixed 7 external interrupts.
+ * They need some special treatment, for example they need to be acked.
+ */
+#ifdef CONFIG_M520x
+/*
+ * The 520x parts only support a limited range of these external
+ * interrupts, only 1, 4 and 7 (as interrupts 65, 66 and 67).
+ */
+#define EINT0 64 /* Is not actually used, but spot reserved for it */
+#define EINT1 65 /* EDGE Port interrupt 1 */
+#define EINT4 66 /* EDGE Port interrupt 4 */
+#define EINT7 67 /* EDGE Port interrupt 7 */
+
+static unsigned int irqebitmap[] = { 0, 1, 4, 7 };
+static unsigned int inline irq2ebit(unsigned int irq)
+{
+ return irqebitmap[irq - EINT0];
+}
+
+#else
+
+/*
+ * Most of the ColdFire parts with the EDGE Port module just have
+ * a strait direct mapping of the 7 external interrupts. Although
+ * there is a bit reserved for 0, it is not used.
+ */
+#define EINT0 64 /* Is not actually used, but spot reserved for it */
+#define EINT1 65 /* EDGE Port interrupt 1 */
+#define EINT7 71 /* EDGE Port interrupt 7 */
+
+static unsigned int inline irq2ebit(unsigned int irq)
+{
+ return irq - EINT0;
+}
+
+#endif
+
+/*
+ * There maybe one, two or three interrupt control units, each has 64
+ * interrupts. If there is no second or third unit then MCFINTC1_* or
+ * MCFINTC2_* defines will be 0 (and code for them optimized away).
+ */
+
+static void intc_irq_mask(struct irq_data *d)
+{
+ unsigned int irq = d->irq - MCFINT_VECBASE;
+
+ if (MCFINTC2_SIMR && (irq > 128))
+ __raw_writeb(irq - 128, MCFINTC2_SIMR);
+ else if (MCFINTC1_SIMR && (irq > 64))
+ __raw_writeb(irq - 64, MCFINTC1_SIMR);
+ else
+ __raw_writeb(irq, MCFINTC0_SIMR);
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+ unsigned int irq = d->irq - MCFINT_VECBASE;
+
+ if (MCFINTC2_CIMR && (irq > 128))
+ __raw_writeb(irq - 128, MCFINTC2_CIMR);
+ else if (MCFINTC1_CIMR && (irq > 64))
+ __raw_writeb(irq - 64, MCFINTC1_CIMR);
+ else
+ __raw_writeb(irq, MCFINTC0_CIMR);
+}
+
+static void intc_irq_ack(struct irq_data *d)
+{
+ unsigned int ebit = irq2ebit(d->irq);
+
+ __raw_writeb(0x1 << ebit, MCFEPORT_EPFR);
+}
+
+static unsigned int intc_irq_startup(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+
+ if ((irq >= EINT1) && (irq <= EINT7)) {
+ unsigned int ebit = irq2ebit(irq);
+ u8 v;
+
+#if defined(MCFEPORT_EPDDR)
+ /* Set EPORT line as input */
+ v = __raw_readb(MCFEPORT_EPDDR);
+ __raw_writeb(v & ~(0x1 << ebit), MCFEPORT_EPDDR);
+#endif
+
+ /* Set EPORT line as interrupt source */
+ v = __raw_readb(MCFEPORT_EPIER);
+ __raw_writeb(v | (0x1 << ebit), MCFEPORT_EPIER);
+ }
+
+ irq -= MCFINT_VECBASE;
+ if (MCFINTC2_ICR0 && (irq > 128))
+ __raw_writeb(5, MCFINTC2_ICR0 + irq - 128);
+ else if (MCFINTC1_ICR0 && (irq > 64))
+ __raw_writeb(5, MCFINTC1_ICR0 + irq - 64);
+ else
+ __raw_writeb(5, MCFINTC0_ICR0 + irq);
+
+ intc_irq_unmask(d);
+ return 0;
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ unsigned int ebit, irq = d->irq;
+ u16 pa, tb;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ tb = 0x1;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ tb = 0x2;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ tb = 0x3;
+ break;
+ default:
+ /* Level triggered */
+ tb = 0;
+ break;
+ }
+
+ if (tb)
+ irq_set_handler(irq, handle_edge_irq);
+
+ ebit = irq2ebit(irq) * 2;
+ pa = __raw_readw(MCFEPORT_EPPAR);
+ pa = (pa & ~(0x3 << ebit)) | (tb << ebit);
+ __raw_writew(pa, MCFEPORT_EPPAR);
+
+ return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+ .name = "CF-INTC",
+ .irq_startup = intc_irq_startup,
+ .irq_mask = intc_irq_mask,
+ .irq_unmask = intc_irq_unmask,
+};
+
+static struct irq_chip intc_irq_chip_edge_port = {
+ .name = "CF-INTC-EP",
+ .irq_startup = intc_irq_startup,
+ .irq_mask = intc_irq_mask,
+ .irq_unmask = intc_irq_unmask,
+ .irq_ack = intc_irq_ack,
+ .irq_set_type = intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+ int irq, eirq;
+
+ /* Mask all interrupt sources */
+ __raw_writeb(0xff, MCFINTC0_SIMR);
+ if (MCFINTC1_SIMR)
+ __raw_writeb(0xff, MCFINTC1_SIMR);
+ if (MCFINTC2_SIMR)
+ __raw_writeb(0xff, MCFINTC2_SIMR);
+
+ eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0) +
+ (MCFINTC2_ICR0 ? 64 : 0);
+ for (irq = MCFINT_VECBASE; (irq < eirq); irq++) {
+ if ((irq >= EINT1) && (irq <= EINT7))
+ irq_set_chip(irq, &intc_irq_chip_edge_port);
+ else
+ irq_set_chip(irq, &intc_irq_chip);
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+ irq_set_handler(irq, handle_level_irq);
+ }
+}
+
diff --git a/arch/m68k/coldfire/intc.c b/arch/m68k/coldfire/intc.c
new file mode 100644
index 000000000000..cce257420388
--- /dev/null
+++ b/arch/m68k/coldfire/intc.c
@@ -0,0 +1,150 @@
+/*
+ * intc.c -- support for the old ColdFire interrupt controller
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/traps.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/*
+ * The mapping of irq number to a mask register bit is not one-to-one.
+ * The irq numbers are either based on "level" of interrupt or fixed
+ * for an autovector-able interrupt. So we keep a local data structure
+ * that maps from irq to mask register. Not all interrupts will have
+ * an IMR bit.
+ */
+unsigned char mcf_irq2imr[NR_IRQS];
+
+/*
+ * Define the miniumun and maximum external interrupt numbers.
+ * This is also used as the "level" interrupt numbers.
+ */
+#define EIRQ1 25
+#define EIRQ7 31
+
+/*
+ * In the early version 2 core ColdFire parts the IMR register was 16 bits
+ * in size. Version 3 (and later version 2) core parts have a 32 bit
+ * sized IMR register. Provide some size independent methods to access the
+ * IMR register.
+ */
+#ifdef MCFSIM_IMR_IS_16BITS
+
+void mcf_setimr(int index)
+{
+ u16 imr;
+ imr = __raw_readw(MCFSIM_IMR);
+ __raw_writew(imr | (0x1 << index), MCFSIM_IMR);
+}
+
+void mcf_clrimr(int index)
+{
+ u16 imr;
+ imr = __raw_readw(MCFSIM_IMR);
+ __raw_writew(imr & ~(0x1 << index), MCFSIM_IMR);
+}
+
+void mcf_maskimr(unsigned int mask)
+{
+ u16 imr;
+ imr = __raw_readw(MCFSIM_IMR);
+ imr |= mask;
+ __raw_writew(imr, MCFSIM_IMR);
+}
+
+#else
+
+void mcf_setimr(int index)
+{
+ u32 imr;
+ imr = __raw_readl(MCFSIM_IMR);
+ __raw_writel(imr | (0x1 << index), MCFSIM_IMR);
+}
+
+void mcf_clrimr(int index)
+{
+ u32 imr;
+ imr = __raw_readl(MCFSIM_IMR);
+ __raw_writel(imr & ~(0x1 << index), MCFSIM_IMR);
+}
+
+void mcf_maskimr(unsigned int mask)
+{
+ u32 imr;
+ imr = __raw_readl(MCFSIM_IMR);
+ imr |= mask;
+ __raw_writel(imr, MCFSIM_IMR);
+}
+
+#endif
+
+/*
+ * Interrupts can be "vectored" on the ColdFire cores that support this old
+ * interrupt controller. That is, the device raising the interrupt can also
+ * supply the vector number to interrupt through. The AVR register of the
+ * interrupt controller enables or disables this for each external interrupt,
+ * so provide generic support for this. Setting this up is out-of-band for
+ * the interrupt system API's, and needs to be done by the driver that
+ * supports this device. Very few devices actually use this.
+ */
+void mcf_autovector(int irq)
+{
+#ifdef MCFSIM_AVR
+ if ((irq >= EIRQ1) && (irq <= EIRQ7)) {
+ u8 avec;
+ avec = __raw_readb(MCFSIM_AVR);
+ avec |= (0x1 << (irq - EIRQ1 + 1));
+ __raw_writeb(avec, MCFSIM_AVR);
+ }
+#endif
+}
+
+static void intc_irq_mask(struct irq_data *d)
+{
+ if (mcf_irq2imr[d->irq])
+ mcf_setimr(mcf_irq2imr[d->irq]);
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+ if (mcf_irq2imr[d->irq])
+ mcf_clrimr(mcf_irq2imr[d->irq]);
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+ .name = "CF-INTC",
+ .irq_mask = intc_irq_mask,
+ .irq_unmask = intc_irq_unmask,
+ .irq_set_type = intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+ int irq;
+
+ mcf_maskimr(0xffffffff);
+
+ for (irq = 0; (irq < NR_IRQS); irq++) {
+ irq_set_chip(irq, &intc_irq_chip);
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+ irq_set_handler(irq, handle_level_irq);
+ }
+}
+
diff --git a/arch/m68k/coldfire/m5206.c b/arch/m68k/coldfire/m5206.c
new file mode 100644
index 000000000000..0e55f449a88c
--- /dev/null
+++ b/arch/m68k/coldfire/m5206.c
@@ -0,0 +1,58 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/5206/config.c
+ *
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2000-2001, Lineo Inc. (www.lineo.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+ &clk_pll,
+ &clk_sys,
+ &clk_mcftmr0,
+ &clk_mcftmr1,
+ &clk_mcfuart0,
+ &clk_mcfuart1,
+ NULL
+};
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined(CONFIG_NETtel)
+ /* Copy command line from FLASH to local buffer... */
+ memcpy(commandp, (char *) 0xf0004000, size);
+ commandp[size-1] = 0;
+#endif /* CONFIG_NETtel */
+
+ mach_sched_init = hw_timer_init;
+
+ /* Only support the external interrupts on their primary level */
+ mcf_mapirq2imr(25, MCFINTC_EINT1);
+ mcf_mapirq2imr(28, MCFINTC_EINT4);
+ mcf_mapirq2imr(31, MCFINTC_EINT7);
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m520x.c b/arch/m68k/coldfire/m520x.c
new file mode 100644
index 000000000000..4040a3c93733
--- /dev/null
+++ b/arch/m68k/coldfire/m520x.c
@@ -0,0 +1,180 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/520x/config.c
+ *
+ * Copyright (C) 2005, Freescale (www.freescale.com)
+ * Copyright (C) 2005, Intec Automation (mike@steroidmicros.com)
+ * Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
+DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
+DEFINE_CLK(0, "edma", 17, MCF_CLK);
+DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
+DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
+DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
+
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
+DEFINE_CLK(0, "mcfeport.0", 34, MCF_CLK);
+DEFINE_CLK(0, "mcfwdt.0", 35, MCF_CLK);
+DEFINE_CLK(0, "pll.0", 36, MCF_CLK);
+DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
+DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
+DEFINE_CLK(0, "sdram.0", 42, MCF_CLK);
+
+struct clk *mcf_clks[] = {
+ &__clk_0_2, /* flexbus */
+ &__clk_0_12, /* fec.0 */
+ &__clk_0_17, /* edma */
+ &__clk_0_18, /* intc.0 */
+ &__clk_0_21, /* iack.0 */
+ &__clk_0_22, /* mcfi2c.0 */
+ &__clk_0_23, /* mcfqspi.0 */
+ &__clk_0_24, /* mcfuart.0 */
+ &__clk_0_25, /* mcfuart.1 */
+ &__clk_0_26, /* mcfuart.2 */
+ &__clk_0_28, /* mcftmr.0 */
+ &__clk_0_29, /* mcftmr.1 */
+ &__clk_0_30, /* mcftmr.2 */
+ &__clk_0_31, /* mcftmr.3 */
+
+ &__clk_0_32, /* mcfpit.0 */
+ &__clk_0_33, /* mcfpit.1 */
+ &__clk_0_34, /* mcfeport.0 */
+ &__clk_0_35, /* mcfwdt.0 */
+ &__clk_0_36, /* pll.0 */
+ &__clk_0_40, /* sys.0 */
+ &__clk_0_41, /* gpio.0 */
+ &__clk_0_42, /* sdram.0 */
+NULL,
+};
+
+static struct clk * const enable_clks[] __initconst = {
+ &__clk_0_2, /* flexbus */
+ &__clk_0_18, /* intc.0 */
+ &__clk_0_21, /* iack.0 */
+ &__clk_0_24, /* mcfuart.0 */
+ &__clk_0_25, /* mcfuart.1 */
+ &__clk_0_26, /* mcfuart.2 */
+
+ &__clk_0_32, /* mcfpit.0 */
+ &__clk_0_33, /* mcfpit.1 */
+ &__clk_0_34, /* mcfeport.0 */
+ &__clk_0_36, /* pll.0 */
+ &__clk_0_40, /* sys.0 */
+ &__clk_0_41, /* gpio.0 */
+ &__clk_0_42, /* sdram.0 */
+};
+
+static struct clk * const disable_clks[] __initconst = {
+ &__clk_0_12, /* fec.0 */
+ &__clk_0_17, /* edma */
+ &__clk_0_22, /* mcfi2c.0 */
+ &__clk_0_23, /* mcfqspi.0 */
+ &__clk_0_28, /* mcftmr.0 */
+ &__clk_0_29, /* mcftmr.1 */
+ &__clk_0_30, /* mcftmr.2 */
+ &__clk_0_31, /* mcftmr.3 */
+ &__clk_0_35, /* mcfwdt.0 */
+};
+
+
+static void __init m520x_clk_init(void)
+{
+ unsigned i;
+
+ /* make sure these clocks are enabled */
+ for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
+ __clk_init_enabled(enable_clks[i]);
+ /* make sure these clocks are disabled */
+ for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
+ __clk_init_disabled(disable_clks[i]);
+}
+
+/***************************************************************************/
+
+static void __init m520x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ u16 par;
+ /* setup Port QS for QSPI with gpio CS control */
+ writeb(0x3f, MCF_GPIO_PAR_QSPI);
+ /* make U1CTS and U2RTS gpio for cs_control */
+ par = readw(MCF_GPIO_PAR_UART);
+ par &= 0x00ff;
+ writew(par, MCF_GPIO_PAR_UART);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+/***************************************************************************/
+
+static void __init m520x_uarts_init(void)
+{
+ u16 par;
+ u8 par2;
+
+ /* UART0 and UART1 GPIO pin setup */
+ par = readw(MCF_GPIO_PAR_UART);
+ par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
+ par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
+ writew(par, MCF_GPIO_PAR_UART);
+
+ /* UART1 GPIO pin setup */
+ par2 = readb(MCF_GPIO_PAR_FECI2C);
+ par2 &= ~0x0F;
+ par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
+ MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
+ writeb(par2, MCF_GPIO_PAR_FECI2C);
+}
+
+/***************************************************************************/
+
+static void __init m520x_fec_init(void)
+{
+ u8 v;
+
+ /* Set multi-function pins to ethernet mode */
+ v = readb(MCF_GPIO_PAR_FEC);
+ writeb(v | 0xf0, MCF_GPIO_PAR_FEC);
+
+ v = readb(MCF_GPIO_PAR_FECI2C);
+ writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+ m520x_clk_init();
+ m520x_uarts_init();
+ m520x_fec_init();
+ m520x_qspi_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m523x.c b/arch/m68k/coldfire/m523x.c
new file mode 100644
index 000000000000..6b7135e6d5b4
--- /dev/null
+++ b/arch/m68k/coldfire/m523x.c
@@ -0,0 +1,86 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/523x/config.c
+ *
+ * Sub-architcture dependent initialization code for the Freescale
+ * 523x CPUs.
+ *
+ * Copyright (C) 1999-2005, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcfpit0, "mcfpit.0", MCF_CLK);
+DEFINE_CLK(mcfpit1, "mcfpit.1", MCF_CLK);
+DEFINE_CLK(mcfpit2, "mcfpit.2", MCF_CLK);
+DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
+DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+ &clk_pll,
+ &clk_sys,
+ &clk_mcfpit0,
+ &clk_mcfpit1,
+ &clk_mcfpit2,
+ &clk_mcfpit3,
+ &clk_mcfuart0,
+ &clk_mcfuart1,
+ &clk_mcfuart2,
+ &clk_mcfqspi0,
+ &clk_fec0,
+ NULL
+};
+
+/***************************************************************************/
+
+static void __init m523x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ u16 par;
+
+ /* setup QSPS pins for QSPI with gpio CS control */
+ writeb(0x1f, MCFGPIO_PAR_QSPI);
+ /* and CS2 & CS3 as gpio */
+ par = readw(MCFGPIO_PAR_TIMER);
+ par &= 0x3f3f;
+ writew(par, MCFGPIO_PAR_TIMER);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+/***************************************************************************/
+
+static void __init m523x_fec_init(void)
+{
+ /* Set multi-function pins to ethernet use */
+ writeb(readb(MCFGPIO_PAR_FECI2C) | 0xf0, MCFGPIO_PAR_FECI2C);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+ m523x_fec_init();
+ m523x_qspi_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m5249.c b/arch/m68k/coldfire/m5249.c
new file mode 100644
index 000000000000..f6253a3313b3
--- /dev/null
+++ b/arch/m68k/coldfire/m5249.c
@@ -0,0 +1,126 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/5249/config.c
+ *
+ * Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+ &clk_pll,
+ &clk_sys,
+ &clk_mcftmr0,
+ &clk_mcftmr1,
+ &clk_mcfuart0,
+ &clk_mcfuart1,
+ &clk_mcfqspi0,
+ NULL
+};
+
+/***************************************************************************/
+
+#ifdef CONFIG_M5249C3
+
+static struct resource m5249_smc91x_resources[] = {
+ {
+ .start = 0xe0000300,
+ .end = 0xe0000300 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MCF_IRQ_GPIO6,
+ .end = MCF_IRQ_GPIO6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device m5249_smc91x = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(m5249_smc91x_resources),
+ .resource = m5249_smc91x_resources,
+};
+
+#endif /* CONFIG_M5249C3 */
+
+static struct platform_device *m5249_devices[] __initdata = {
+#ifdef CONFIG_M5249C3
+ &m5249_smc91x,
+#endif
+};
+
+/***************************************************************************/
+
+static void __init m5249_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ /* QSPI irq setup */
+ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
+ MCFSIM_QSPIICR);
+ mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+/***************************************************************************/
+
+#ifdef CONFIG_M5249C3
+
+static void __init m5249_smc91x_init(void)
+{
+ u32 gpio;
+
+ /* Set the GPIO line as interrupt source for smc91x device */
+ gpio = readl(MCFSIM2_GPIOINTENABLE);
+ writel(gpio | 0x40, MCFSIM2_GPIOINTENABLE);
+
+ gpio = readl(MCFINTC2_INTPRI5);
+ writel(gpio | 0x04000000, MCFINTC2_INTPRI5);
+}
+
+#endif /* CONFIG_M5249C3 */
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+
+#ifdef CONFIG_M5249C3
+ m5249_smc91x_init();
+#endif
+ m5249_qspi_init();
+}
+
+/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+ platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
+ return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m525x.c b/arch/m68k/coldfire/m525x.c
new file mode 100644
index 000000000000..1adba3909035
--- /dev/null
+++ b/arch/m68k/coldfire/m525x.c
@@ -0,0 +1,88 @@
+/***************************************************************************/
+
+/*
+ * 525x.c
+ *
+ * Copyright (C) 2012, Steven King <sfking@fdwdc.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+ &clk_pll,
+ &clk_sys,
+ &clk_mcftmr0,
+ &clk_mcftmr1,
+ &clk_mcfuart0,
+ &clk_mcfuart1,
+ &clk_mcfqspi0,
+ NULL
+};
+
+/***************************************************************************/
+
+static void __init m525x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ /* set the GPIO function for the qspi cs gpios */
+ /* FIXME: replace with pinmux/pinctl support */
+ u32 f = readl(MCFSIM2_GPIOFUNC);
+ f |= (1 << MCFQSPI_CS2) | (1 << MCFQSPI_CS1) | (1 << MCFQSPI_CS0);
+ writel(f, MCFSIM2_GPIOFUNC);
+
+ /* QSPI irq setup */
+ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
+ MCFSIM_QSPIICR);
+ mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+static void __init m525x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_COLDFIRE)
+ u32 r;
+
+ /* first I2C controller uses regular irq setup */
+ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+ MCFSIM_I2CICR);
+ mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+
+ /* second I2C controller is completely different */
+ r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+ r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
+ r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
+ writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+#endif /* IS_ENABLED(CONFIG_I2C_COLDFIRE) */
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+
+ m525x_qspi_init();
+ m525x_i2c_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m5272.c b/arch/m68k/coldfire/m5272.c
new file mode 100644
index 000000000000..8a4d3cc322c6
--- /dev/null
+++ b/arch/m68k/coldfire/m5272.c
@@ -0,0 +1,135 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/5272/config.c
+ *
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+/*
+ * Some platforms need software versions of the GPIO data registers.
+ */
+unsigned short ppdata;
+unsigned char ledbank = 0xff;
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
+DEFINE_CLK(mcftmr2, "mcftmr.2", MCF_BUSCLK);
+DEFINE_CLK(mcftmr3, "mcftmr.3", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+ &clk_pll,
+ &clk_sys,
+ &clk_mcftmr0,
+ &clk_mcftmr1,
+ &clk_mcftmr2,
+ &clk_mcftmr3,
+ &clk_mcfuart0,
+ &clk_mcfuart1,
+ &clk_mcfqspi0,
+ &clk_fec0,
+ NULL
+};
+
+/***************************************************************************/
+
+static void __init m5272_uarts_init(void)
+{
+ u32 v;
+
+ /* Enable the output lines for the serial ports */
+ v = readl(MCFSIM_PBCNT);
+ v = (v & ~0x000000ff) | 0x00000055;
+ writel(v, MCFSIM_PBCNT);
+
+ v = readl(MCFSIM_PDCNT);
+ v = (v & ~0x000003fc) | 0x000002a8;
+ writel(v, MCFSIM_PDCNT);
+}
+
+/***************************************************************************/
+
+static void m5272_cpu_reset(void)
+{
+ local_irq_disable();
+ /* Set watchdog to reset, and enabled */
+ __raw_writew(0, MCFSIM_WIRR);
+ __raw_writew(1, MCFSIM_WRRR);
+ __raw_writew(0, MCFSIM_WCR);
+ for (;;)
+ /* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined (CONFIG_MOD5272)
+ /* Set base of device vectors to be 64 */
+ writeb(0x40, MCFSIM_PIVR);
+#endif
+
+#if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
+ /* Copy command line from FLASH to local buffer... */
+ memcpy(commandp, (char *) 0xf0004000, size);
+ commandp[size-1] = 0;
+#elif defined(CONFIG_CANCam)
+ /* Copy command line from FLASH to local buffer... */
+ memcpy(commandp, (char *) 0xf0010000, size);
+ commandp[size-1] = 0;
+#endif
+
+ mach_reset = m5272_cpu_reset;
+ mach_sched_init = hw_timer_init;
+}
+
+/***************************************************************************/
+
+/*
+ * Some 5272 based boards have the FEC ethernet diectly connected to
+ * an ethernet switch. In this case we need to use the fixed phy type,
+ * and we need to declare it early in boot.
+ */
+static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
+ .link = 1,
+ .speed = 100,
+ .duplex = 0,
+};
+
+/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+ m5272_uarts_init();
+ fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
+ return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m527x.c b/arch/m68k/coldfire/m527x.c
new file mode 100644
index 000000000000..62d81ef016f1
--- /dev/null
+++ b/arch/m68k/coldfire/m527x.c
@@ -0,0 +1,126 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/527x/config.c
+ *
+ * Sub-architcture dependent initialization code for the Freescale
+ * 5270/5271 CPUs.
+ *
+ * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcfpit0, "mcfpit.0", MCF_CLK);
+DEFINE_CLK(mcfpit1, "mcfpit.1", MCF_CLK);
+DEFINE_CLK(mcfpit2, "mcfpit.2", MCF_CLK);
+DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
+DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
+DEFINE_CLK(fec1, "fec.1", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+ &clk_pll,
+ &clk_sys,
+ &clk_mcfpit0,
+ &clk_mcfpit1,
+ &clk_mcfpit2,
+ &clk_mcfpit3,
+ &clk_mcfuart0,
+ &clk_mcfuart1,
+ &clk_mcfuart2,
+ &clk_mcfqspi0,
+ &clk_fec0,
+ &clk_fec1,
+ NULL
+};
+
+/***************************************************************************/
+
+static void __init m527x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+#if defined(CONFIG_M5271)
+ u16 par;
+
+ /* setup QSPS pins for QSPI with gpio CS control */
+ writeb(0x1f, MCFGPIO_PAR_QSPI);
+ /* and CS2 & CS3 as gpio */
+ par = readw(MCFGPIO_PAR_TIMER);
+ par &= 0x3f3f;
+ writew(par, MCFGPIO_PAR_TIMER);
+#elif defined(CONFIG_M5275)
+ /* setup QSPS pins for QSPI with gpio CS control */
+ writew(0x003e, MCFGPIO_PAR_QSPI);
+#endif
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+/***************************************************************************/
+
+static void __init m527x_uarts_init(void)
+{
+ u16 sepmask;
+
+ /*
+ * External Pin Mask Setting & Enable External Pin for Interface
+ */
+ sepmask = readw(MCFGPIO_PAR_UART);
+ sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
+ writew(sepmask, MCFGPIO_PAR_UART);
+}
+
+/***************************************************************************/
+
+static void __init m527x_fec_init(void)
+{
+ u16 par;
+ u8 v;
+
+ /* Set multi-function pins to ethernet mode for fec0 */
+#if defined(CONFIG_M5271)
+ v = readb(MCFGPIO_PAR_FECI2C);
+ writeb(v | 0xf0, MCFGPIO_PAR_FECI2C);
+#else
+ par = readw(MCFGPIO_PAR_FECI2C);
+ writew(par | 0xf00, MCFGPIO_PAR_FECI2C);
+ v = readb(MCFGPIO_PAR_FEC0HL);
+ writeb(v | 0xc0, MCFGPIO_PAR_FEC0HL);
+
+ /* Set multi-function pins to ethernet mode for fec1 */
+ par = readw(MCFGPIO_PAR_FECI2C);
+ writew(par | 0xa0, MCFGPIO_PAR_FECI2C);
+ v = readb(MCFGPIO_PAR_FEC1HL);
+ writeb(v | 0xc0, MCFGPIO_PAR_FEC1HL);
+#endif
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+ m527x_uarts_init();
+ m527x_fec_init();
+ m527x_qspi_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m528x.c b/arch/m68k/coldfire/m528x.c
new file mode 100644
index 000000000000..21cd161d36f1
--- /dev/null
+++ b/arch/m68k/coldfire/m528x.c
@@ -0,0 +1,132 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/528x/config.c
+ *
+ * Sub-architcture dependent initialization code for the Freescale
+ * 5280, 5281 and 5282 CPUs.
+ *
+ * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcfpit0, "mcfpit.0", MCF_CLK);
+DEFINE_CLK(mcfpit1, "mcfpit.1", MCF_CLK);
+DEFINE_CLK(mcfpit2, "mcfpit.2", MCF_CLK);
+DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
+DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
+DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+ &clk_pll,
+ &clk_sys,
+ &clk_mcfpit0,
+ &clk_mcfpit1,
+ &clk_mcfpit2,
+ &clk_mcfpit3,
+ &clk_mcfuart0,
+ &clk_mcfuart1,
+ &clk_mcfuart2,
+ &clk_mcfqspi0,
+ &clk_fec0,
+ NULL
+};
+
+/***************************************************************************/
+
+static void __init m528x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ /* setup Port QS for QSPI with gpio CS control */
+ __raw_writeb(0x07, MCFGPIO_PQSPAR);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+/***************************************************************************/
+
+static void __init m528x_uarts_init(void)
+{
+ u8 port;
+
+ /* make sure PUAPAR is set for UART0 and UART1 */
+ port = readb(MCFGPIO_PUAPAR);
+ port |= 0x03 | (0x03 << 2);
+ writeb(port, MCFGPIO_PUAPAR);
+}
+
+/***************************************************************************/
+
+static void __init m528x_fec_init(void)
+{
+ u16 v16;
+
+ /* Set multi-function pins to ethernet mode for fec0 */
+ v16 = readw(MCFGPIO_PASPAR);
+ writew(v16 | 0xf00, MCFGPIO_PASPAR);
+ writeb(0xc0, MCFGPIO_PEHLPAR);
+}
+
+/***************************************************************************/
+
+#ifdef CONFIG_WILDFIRE
+void wildfire_halt(void)
+{
+ writeb(0, 0x30000007);
+ writeb(0x2, 0x30000007);
+}
+#endif
+
+#ifdef CONFIG_WILDFIREMOD
+void wildfiremod_halt(void)
+{
+ printk(KERN_INFO "WildFireMod hibernating...\n");
+
+ /* Set portE.5 to Digital IO */
+ MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
+
+ /* Make portE.5 an output */
+ MCF5282_GPIO_DDRE |= (1 << 5);
+
+ /* Now toggle portE.5 from low to high */
+ MCF5282_GPIO_PORTE &= ~(1 << 5);
+ MCF5282_GPIO_PORTE |= (1 << 5);
+
+ printk(KERN_EMERG "Failed to hibernate. Halting!\n");
+}
+#endif
+
+void __init config_BSP(char *commandp, int size)
+{
+#ifdef CONFIG_WILDFIRE
+ mach_halt = wildfire_halt;
+#endif
+#ifdef CONFIG_WILDFIREMOD
+ mach_halt = wildfiremod_halt;
+#endif
+ mach_sched_init = hw_timer_init;
+ m528x_uarts_init();
+ m528x_fec_init();
+ m528x_qspi_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m5307.c b/arch/m68k/coldfire/m5307.c
new file mode 100644
index 000000000000..887435361386
--- /dev/null
+++ b/arch/m68k/coldfire/m5307.c
@@ -0,0 +1,78 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/5307/config.c
+ *
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2000, Lineo (www.lineo.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfwdebug.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+/*
+ * Some platforms need software versions of the GPIO data registers.
+ */
+unsigned short ppdata;
+unsigned char ledbank = 0xff;
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+ &clk_pll,
+ &clk_sys,
+ &clk_mcftmr0,
+ &clk_mcftmr1,
+ &clk_mcfuart0,
+ &clk_mcfuart1,
+ NULL
+};
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined(CONFIG_NETtel) || \
+ defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
+ /* Copy command line from FLASH to local buffer... */
+ memcpy(commandp, (char *) 0xf0004000, size);
+ commandp[size-1] = 0;
+#endif
+
+ mach_sched_init = hw_timer_init;
+
+ /* Only support the external interrupts on their primary level */
+ mcf_mapirq2imr(25, MCFINTC_EINT1);
+ mcf_mapirq2imr(27, MCFINTC_EINT3);
+ mcf_mapirq2imr(29, MCFINTC_EINT5);
+ mcf_mapirq2imr(31, MCFINTC_EINT7);
+
+#ifdef CONFIG_BDM_DISABLE
+ /*
+ * Disable the BDM clocking. This also turns off most of the rest of
+ * the BDM device. This is good for EMC reasons. This option is not
+ * incompatible with the memory protection option.
+ */
+ wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
+#endif
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m53xx.c b/arch/m68k/coldfire/m53xx.c
new file mode 100644
index 000000000000..80879a7fe3d5
--- /dev/null
+++ b/arch/m68k/coldfire/m53xx.c
@@ -0,0 +1,588 @@
+/***************************************************************************/
+
+/*
+ * m53xx.c -- platform support for ColdFire 53xx based boards
+ *
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2000, Lineo (www.lineo.com)
+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
+ * Copyright Freescale Semiconductor, Inc 2006
+ * Copyright (c) 2006, emlix, Sebastian Hess <shess@hessware.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfdma.h>
+#include <asm/mcfwdebug.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
+DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
+DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
+DEFINE_CLK(0, "edma", 17, MCF_CLK);
+DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
+DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
+DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
+DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
+
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.2", 34, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.3", 35, MCF_CLK);
+DEFINE_CLK(0, "mcfpwm.0", 36, MCF_CLK);
+DEFINE_CLK(0, "mcfeport.0", 37, MCF_CLK);
+DEFINE_CLK(0, "mcfwdt.0", 38, MCF_CLK);
+DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
+DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfrtc.0", 42, MCF_CLK);
+DEFINE_CLK(0, "mcflcd.0", 43, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-otg.0", 44, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-host.0", 45, MCF_CLK);
+DEFINE_CLK(0, "sdram.0", 46, MCF_CLK);
+DEFINE_CLK(0, "ssi.0", 47, MCF_CLK);
+DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
+
+DEFINE_CLK(1, "mdha.0", 32, MCF_CLK);
+DEFINE_CLK(1, "skha.0", 33, MCF_CLK);
+DEFINE_CLK(1, "rng.0", 34, MCF_CLK);
+
+struct clk *mcf_clks[] = {
+ &__clk_0_2, /* flexbus */
+ &__clk_0_8, /* mcfcan.0 */
+ &__clk_0_12, /* fec.0 */
+ &__clk_0_17, /* edma */
+ &__clk_0_18, /* intc.0 */
+ &__clk_0_19, /* intc.1 */
+ &__clk_0_21, /* iack.0 */
+ &__clk_0_22, /* mcfi2c.0 */
+ &__clk_0_23, /* mcfqspi.0 */
+ &__clk_0_24, /* mcfuart.0 */
+ &__clk_0_25, /* mcfuart.1 */
+ &__clk_0_26, /* mcfuart.2 */
+ &__clk_0_28, /* mcftmr.0 */
+ &__clk_0_29, /* mcftmr.1 */
+ &__clk_0_30, /* mcftmr.2 */
+ &__clk_0_31, /* mcftmr.3 */
+
+ &__clk_0_32, /* mcfpit.0 */
+ &__clk_0_33, /* mcfpit.1 */
+ &__clk_0_34, /* mcfpit.2 */
+ &__clk_0_35, /* mcfpit.3 */
+ &__clk_0_36, /* mcfpwm.0 */
+ &__clk_0_37, /* mcfeport.0 */
+ &__clk_0_38, /* mcfwdt.0 */
+ &__clk_0_40, /* sys.0 */
+ &__clk_0_41, /* gpio.0 */
+ &__clk_0_42, /* mcfrtc.0 */
+ &__clk_0_43, /* mcflcd.0 */
+ &__clk_0_44, /* mcfusb-otg.0 */
+ &__clk_0_45, /* mcfusb-host.0 */
+ &__clk_0_46, /* sdram.0 */
+ &__clk_0_47, /* ssi.0 */
+ &__clk_0_48, /* pll.0 */
+
+ &__clk_1_32, /* mdha.0 */
+ &__clk_1_33, /* skha.0 */
+ &__clk_1_34, /* rng.0 */
+ NULL,
+};
+
+static struct clk * const enable_clks[] __initconst = {
+ &__clk_0_2, /* flexbus */
+ &__clk_0_18, /* intc.0 */
+ &__clk_0_19, /* intc.1 */
+ &__clk_0_21, /* iack.0 */
+ &__clk_0_24, /* mcfuart.0 */
+ &__clk_0_25, /* mcfuart.1 */
+ &__clk_0_26, /* mcfuart.2 */
+ &__clk_0_28, /* mcftmr.0 */
+ &__clk_0_29, /* mcftmr.1 */
+ &__clk_0_32, /* mcfpit.0 */
+ &__clk_0_33, /* mcfpit.1 */
+ &__clk_0_37, /* mcfeport.0 */
+ &__clk_0_40, /* sys.0 */
+ &__clk_0_41, /* gpio.0 */
+ &__clk_0_46, /* sdram.0 */
+ &__clk_0_48, /* pll.0 */
+};
+
+static struct clk * const disable_clks[] __initconst = {
+ &__clk_0_8, /* mcfcan.0 */
+ &__clk_0_12, /* fec.0 */
+ &__clk_0_17, /* edma */
+ &__clk_0_22, /* mcfi2c.0 */
+ &__clk_0_23, /* mcfqspi.0 */
+ &__clk_0_30, /* mcftmr.2 */
+ &__clk_0_31, /* mcftmr.3 */
+ &__clk_0_34, /* mcfpit.2 */
+ &__clk_0_35, /* mcfpit.3 */
+ &__clk_0_36, /* mcfpwm.0 */
+ &__clk_0_38, /* mcfwdt.0 */
+ &__clk_0_42, /* mcfrtc.0 */
+ &__clk_0_43, /* mcflcd.0 */
+ &__clk_0_44, /* mcfusb-otg.0 */
+ &__clk_0_45, /* mcfusb-host.0 */
+ &__clk_0_47, /* ssi.0 */
+ &__clk_1_32, /* mdha.0 */
+ &__clk_1_33, /* skha.0 */
+ &__clk_1_34, /* rng.0 */
+};
+
+
+static void __init m53xx_clk_init(void)
+{
+ unsigned i;
+
+ /* make sure these clocks are enabled */
+ for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
+ __clk_init_enabled(enable_clks[i]);
+ /* make sure these clocks are disabled */
+ for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
+ __clk_init_disabled(disable_clks[i]);
+}
+
+/***************************************************************************/
+
+static void __init m53xx_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ /* setup QSPS pins for QSPI with gpio CS control */
+ writew(0x01f0, MCFGPIO_PAR_QSPI);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+/***************************************************************************/
+
+static void __init m53xx_uarts_init(void)
+{
+ /* UART GPIO initialization */
+ writew(readw(MCFGPIO_PAR_UART) | 0x0FFF, MCFGPIO_PAR_UART);
+}
+
+/***************************************************************************/
+
+static void __init m53xx_fec_init(void)
+{
+ u8 v;
+
+ /* Set multi-function pins to ethernet mode for fec0 */
+ v = readb(MCFGPIO_PAR_FECI2C);
+ v |= MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
+ MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO;
+ writeb(v, MCFGPIO_PAR_FECI2C);
+
+ v = readb(MCFGPIO_PAR_FEC);
+ v = MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC | MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC;
+ writeb(v, MCFGPIO_PAR_FEC);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if !defined(CONFIG_BOOTPARAM)
+ /* Copy command line from FLASH to local buffer... */
+ memcpy(commandp, (char *) 0x4000, 4);
+ if(strncmp(commandp, "kcl ", 4) == 0){
+ memcpy(commandp, (char *) 0x4004, size);
+ commandp[size-1] = 0;
+ } else {
+ memset(commandp, 0, size);
+ }
+#endif
+ mach_sched_init = hw_timer_init;
+ m53xx_clk_init();
+ m53xx_uarts_init();
+ m53xx_fec_init();
+ m53xx_qspi_init();
+
+#ifdef CONFIG_BDM_DISABLE
+ /*
+ * Disable the BDM clocking. This also turns off most of the rest of
+ * the BDM device. This is good for EMC reasons. This option is not
+ * incompatible with the memory protection option.
+ */
+ wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
+#endif
+}
+
+/***************************************************************************/
+/* Board initialization */
+/***************************************************************************/
+/*
+ * PLL min/max specifications
+ */
+#define MAX_FVCO 500000 /* KHz */
+#define MAX_FSYS 80000 /* KHz */
+#define MIN_FSYS 58333 /* KHz */
+#define FREF 16000 /* KHz */
+
+
+#define MAX_MFD 135 /* Multiplier */
+#define MIN_MFD 88 /* Multiplier */
+#define BUSDIV 6 /* Divider */
+
+/*
+ * Low Power Divider specifications
+ */
+#define MIN_LPD (1 << 0) /* Divider (not encoded) */
+#define MAX_LPD (1 << 15) /* Divider (not encoded) */
+#define DEFAULT_LPD (1 << 1) /* Divider (not encoded) */
+
+#define SYS_CLK_KHZ 80000
+#define SYSTEM_PERIOD 12.5
+/*
+ * SDRAM Timing Parameters
+ */
+#define SDRAM_BL 8 /* # of beats in a burst */
+#define SDRAM_TWR 2 /* in clocks */
+#define SDRAM_CASL 2.5 /* CASL in clocks */
+#define SDRAM_TRCD 2 /* in clocks */
+#define SDRAM_TRP 2 /* in clocks */
+#define SDRAM_TRFC 7 /* in clocks */
+#define SDRAM_TREFI 7800 /* in ns */
+
+#define EXT_SRAM_ADDRESS (0xC0000000)
+#define FLASH_ADDRESS (0x00000000)
+#define SDRAM_ADDRESS (0x40000000)
+
+#define NAND_FLASH_ADDRESS (0xD0000000)
+
+int sys_clk_khz = 0;
+int sys_clk_mhz = 0;
+
+void wtm_init(void);
+void scm_init(void);
+void gpio_init(void);
+void fbcs_init(void);
+void sdramc_init(void);
+int clock_pll (int fsys, int flags);
+int clock_limp (int);
+int clock_exit_limp (void);
+int get_sys_clock (void);
+
+asmlinkage void __init sysinit(void)
+{
+ sys_clk_khz = clock_pll(0, 0);
+ sys_clk_mhz = sys_clk_khz/1000;
+
+ wtm_init();
+ scm_init();
+ gpio_init();
+ fbcs_init();
+ sdramc_init();
+}
+
+void wtm_init(void)
+{
+ /* Disable watchdog timer */
+ writew(0, MCF_WTM_WCR);
+}
+
+#define MCF_SCM_BCR_GBW (0x00000100)
+#define MCF_SCM_BCR_GBR (0x00000200)
+
+void scm_init(void)
+{
+ /* All masters are trusted */
+ writel(0x77777777, MCF_SCM_MPR);
+
+ /* Allow supervisor/user, read/write, and trusted/untrusted
+ access to all slaves */
+ writel(0, MCF_SCM_PACRA);
+ writel(0, MCF_SCM_PACRB);
+ writel(0, MCF_SCM_PACRC);
+ writel(0, MCF_SCM_PACRD);
+ writel(0, MCF_SCM_PACRE);
+ writel(0, MCF_SCM_PACRF);
+
+ /* Enable bursts */
+ writel(MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW, MCF_SCM_BCR);
+}
+
+
+void fbcs_init(void)
+{
+ writeb(0x3E, MCFGPIO_PAR_CS);
+
+ /* Latch chip select */
+ writel(0x10080000, MCF_FBCS1_CSAR);
+
+ writel(0x002A3780, MCF_FBCS1_CSCR);
+ writel(MCF_FBCS_CSMR_BAM_2M | MCF_FBCS_CSMR_V, MCF_FBCS1_CSMR);
+
+ /* Initialize latch to drive signals to inactive states */
+ writew(0xffff, 0x10080000);
+
+ /* External SRAM */
+ writel(EXT_SRAM_ADDRESS, MCF_FBCS1_CSAR);
+ writel(MCF_FBCS_CSCR_PS_16 |
+ MCF_FBCS_CSCR_AA |
+ MCF_FBCS_CSCR_SBM |
+ MCF_FBCS_CSCR_WS(1),
+ MCF_FBCS1_CSCR);
+ writel(MCF_FBCS_CSMR_BAM_512K | MCF_FBCS_CSMR_V, MCF_FBCS1_CSMR);
+
+ /* Boot Flash connected to FBCS0 */
+ writel(FLASH_ADDRESS, MCF_FBCS0_CSAR);
+ writel(MCF_FBCS_CSCR_PS_16 |
+ MCF_FBCS_CSCR_BEM |
+ MCF_FBCS_CSCR_AA |
+ MCF_FBCS_CSCR_SBM |
+ MCF_FBCS_CSCR_WS(7),
+ MCF_FBCS0_CSCR);
+ writel(MCF_FBCS_CSMR_BAM_32M | MCF_FBCS_CSMR_V, MCF_FBCS0_CSMR);
+}
+
+void sdramc_init(void)
+{
+ /*
+ * Check to see if the SDRAM has already been initialized
+ * by a run control tool
+ */
+ if (!(readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)) {
+ /* SDRAM chip select initialization */
+
+ /* Initialize SDRAM chip select */
+ writel(MCF_SDRAMC_SDCS_BA(SDRAM_ADDRESS) |
+ MCF_SDRAMC_SDCS_CSSZ(MCF_SDRAMC_SDCS_CSSZ_32MBYTE),
+ MCF_SDRAMC_SDCS0);
+
+ /*
+ * Basic configuration and initialization
+ */
+ writel(MCF_SDRAMC_SDCFG1_SRD2RW((int)((SDRAM_CASL + 2) + 0.5)) |
+ MCF_SDRAMC_SDCFG1_SWT2RD(SDRAM_TWR + 1) |
+ MCF_SDRAMC_SDCFG1_RDLAT((int)((SDRAM_CASL * 2) + 2)) |
+ MCF_SDRAMC_SDCFG1_ACT2RW((int)(SDRAM_TRCD + 0.5)) |
+ MCF_SDRAMC_SDCFG1_PRE2ACT((int)(SDRAM_TRP + 0.5)) |
+ MCF_SDRAMC_SDCFG1_REF2ACT((int)(SDRAM_TRFC + 0.5)) |
+ MCF_SDRAMC_SDCFG1_WTLAT(3),
+ MCF_SDRAMC_SDCFG1);
+ writel(MCF_SDRAMC_SDCFG2_BRD2PRE(SDRAM_BL / 2 + 1) |
+ MCF_SDRAMC_SDCFG2_BWT2RW(SDRAM_BL / 2 + SDRAM_TWR) |
+ MCF_SDRAMC_SDCFG2_BRD2WT((int)((SDRAM_CASL + SDRAM_BL / 2 - 1.0) + 0.5)) |
+ MCF_SDRAMC_SDCFG2_BL(SDRAM_BL - 1),
+ MCF_SDRAMC_SDCFG2);
+
+
+ /*
+ * Precharge and enable write to SDMR
+ */
+ writel(MCF_SDRAMC_SDCR_MODE_EN |
+ MCF_SDRAMC_SDCR_CKE |
+ MCF_SDRAMC_SDCR_DDR |
+ MCF_SDRAMC_SDCR_MUX(1) |
+ MCF_SDRAMC_SDCR_RCNT((int)(((SDRAM_TREFI / (SYSTEM_PERIOD * 64)) - 1) + 0.5)) |
+ MCF_SDRAMC_SDCR_PS_16 |
+ MCF_SDRAMC_SDCR_IPALL,
+ MCF_SDRAMC_SDCR);
+
+ /*
+ * Write extended mode register
+ */
+ writel(MCF_SDRAMC_SDMR_BNKAD_LEMR |
+ MCF_SDRAMC_SDMR_AD(0x0) |
+ MCF_SDRAMC_SDMR_CMD,
+ MCF_SDRAMC_SDMR);
+
+ /*
+ * Write mode register and reset DLL
+ */
+ writel(MCF_SDRAMC_SDMR_BNKAD_LMR |
+ MCF_SDRAMC_SDMR_AD(0x163) |
+ MCF_SDRAMC_SDMR_CMD,
+ MCF_SDRAMC_SDMR);
+
+ /*
+ * Execute a PALL command
+ */
+ writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IPALL, MCF_SDRAMC_SDCR);
+
+ /*
+ * Perform two REF cycles
+ */
+ writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IREF, MCF_SDRAMC_SDCR);
+ writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IREF, MCF_SDRAMC_SDCR);
+
+ /*
+ * Write mode register and clear reset DLL
+ */
+ writel(MCF_SDRAMC_SDMR_BNKAD_LMR |
+ MCF_SDRAMC_SDMR_AD(0x063) |
+ MCF_SDRAMC_SDMR_CMD,
+ MCF_SDRAMC_SDMR);
+
+ /*
+ * Enable auto refresh and lock SDMR
+ */
+ writel(readl(MCF_SDRAMC_SDCR) & ~MCF_SDRAMC_SDCR_MODE_EN,
+ MCF_SDRAMC_SDCR);
+ writel(MCF_SDRAMC_SDCR_REF | MCF_SDRAMC_SDCR_DQS_OE(0xC),
+ MCF_SDRAMC_SDCR);
+ }
+}
+
+void gpio_init(void)
+{
+ /* Enable UART0 pins */
+ writew(MCF_GPIO_PAR_UART_PAR_URXD0 | MCF_GPIO_PAR_UART_PAR_UTXD0,
+ MCFGPIO_PAR_UART);
+
+ /*
+ * Initialize TIN3 as a GPIO output to enable the write
+ * half of the latch.
+ */
+ writeb(0x00, MCFGPIO_PAR_TIMER);
+ writeb(0x08, MCFGPIO_PDDR_TIMER);
+ writeb(0x00, MCFGPIO_PCLRR_TIMER);
+}
+
+int clock_pll(int fsys, int flags)
+{
+ int fref, temp, fout, mfd;
+ u32 i;
+
+ fref = FREF;
+
+ if (fsys == 0) {
+ /* Return current PLL output */
+ mfd = readb(MCF_PLL_PFDR);
+
+ return (fref * mfd / (BUSDIV * 4));
+ }
+
+ /* Check bounds of requested system clock */
+ if (fsys > MAX_FSYS)
+ fsys = MAX_FSYS;
+ if (fsys < MIN_FSYS)
+ fsys = MIN_FSYS;
+
+ /* Multiplying by 100 when calculating the temp value,
+ and then dividing by 100 to calculate the mfd allows
+ for exact values without needing to include floating
+ point libraries. */
+ temp = 100 * fsys / fref;
+ mfd = 4 * BUSDIV * temp / 100;
+
+ /* Determine the output frequency for selected values */
+ fout = (fref * mfd / (BUSDIV * 4));
+
+ /*
+ * Check to see if the SDRAM has already been initialized.
+ * If it has then the SDRAM needs to be put into self refresh
+ * mode before reprogramming the PLL.
+ */
+ if (readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)
+ /* Put SDRAM into self refresh mode */
+ writel(readl(MCF_SDRAMC_SDCR) & ~MCF_SDRAMC_SDCR_CKE,
+ MCF_SDRAMC_SDCR);
+
+ /*
+ * Initialize the PLL to generate the new system clock frequency.
+ * The device must be put into LIMP mode to reprogram the PLL.
+ */
+
+ /* Enter LIMP mode */
+ clock_limp(DEFAULT_LPD);
+
+ /* Reprogram PLL for desired fsys */
+ writeb(MCF_PLL_PODR_CPUDIV(BUSDIV/3) | MCF_PLL_PODR_BUSDIV(BUSDIV),
+ MCF_PLL_PODR);
+
+ writeb(mfd, MCF_PLL_PFDR);
+
+ /* Exit LIMP mode */
+ clock_exit_limp();
+
+ /*
+ * Return the SDRAM to normal operation if it is in use.
+ */
+ if (readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)
+ /* Exit self refresh mode */
+ writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_CKE,
+ MCF_SDRAMC_SDCR);
+
+ /* Errata - workaround for SDRAM opeartion after exiting LIMP mode */
+ writel(MCF_SDRAMC_REFRESH, MCF_SDRAMC_LIMP_FIX);
+
+ /* wait for DQS logic to relock */
+ for (i = 0; i < 0x200; i++)
+ ;
+
+ return fout;
+}
+
+int clock_limp(int div)
+{
+ u32 temp;
+
+ /* Check bounds of divider */
+ if (div < MIN_LPD)
+ div = MIN_LPD;
+ if (div > MAX_LPD)
+ div = MAX_LPD;
+
+ /* Save of the current value of the SSIDIV so we don't
+ overwrite the value*/
+ temp = readw(MCF_CCM_CDR) & MCF_CCM_CDR_SSIDIV(0xF);
+
+ /* Apply the divider to the system clock */
+ writew(MCF_CCM_CDR_LPDIV(div) | MCF_CCM_CDR_SSIDIV(temp), MCF_CCM_CDR);
+
+ writew(readw(MCF_CCM_MISCCR) | MCF_CCM_MISCCR_LIMP, MCF_CCM_MISCCR);
+
+ return (FREF/(3*(1 << div)));
+}
+
+int clock_exit_limp(void)
+{
+ int fout;
+
+ /* Exit LIMP mode */
+ writew(readw(MCF_CCM_MISCCR) & ~MCF_CCM_MISCCR_LIMP, MCF_CCM_MISCCR);
+
+ /* Wait for PLL to lock */
+ while (!(readw(MCF_CCM_MISCCR) & MCF_CCM_MISCCR_PLL_LOCK))
+ ;
+
+ fout = get_sys_clock();
+
+ return fout;
+}
+
+int get_sys_clock(void)
+{
+ int divider;
+
+ /* Test to see if device is in LIMP mode */
+ if (readw(MCF_CCM_MISCCR) & MCF_CCM_MISCCR_LIMP) {
+ divider = readw(MCF_CCM_CDR) & MCF_CCM_CDR_LPDIV(0xF);
+ return (FREF/(2 << divider));
+ }
+ else
+ return (FREF * readb(MCF_PLL_PFDR)) / (BUSDIV * 4);
+}
diff --git a/arch/m68k/coldfire/m5407.c b/arch/m68k/coldfire/m5407.c
new file mode 100644
index 000000000000..2fb3cdbfde30
--- /dev/null
+++ b/arch/m68k/coldfire/m5407.c
@@ -0,0 +1,53 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/5407/config.c
+ *
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2000, Lineo (www.lineo.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
+DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+ &clk_pll,
+ &clk_sys,
+ &clk_mcftmr0,
+ &clk_mcftmr1,
+ &clk_mcfuart0,
+ &clk_mcfuart1,
+ NULL
+};
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+
+ /* Only support the external interrupts on their primary level */
+ mcf_mapirq2imr(25, MCFINTC_EINT1);
+ mcf_mapirq2imr(27, MCFINTC_EINT3);
+ mcf_mapirq2imr(29, MCFINTC_EINT5);
+ mcf_mapirq2imr(31, MCFINTC_EINT7);
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/m5441x.c b/arch/m68k/coldfire/m5441x.c
new file mode 100644
index 000000000000..98a13cce93d8
--- /dev/null
+++ b/arch/m68k/coldfire/m5441x.c
@@ -0,0 +1,261 @@
+/*
+ * m5441x.c -- support for Coldfire m5441x processors
+ *
+ * (C) Copyright Steven King <sfking@fdwdc.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfdma.h>
+#include <asm/mcfclk.h>
+
+DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
+DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
+DEFINE_CLK(0, "mcfcan.1", 9, MCF_CLK);
+DEFINE_CLK(0, "mcfi2c.1", 14, MCF_CLK);
+DEFINE_CLK(0, "mcfdspi.1", 15, MCF_CLK);
+DEFINE_CLK(0, "edma", 17, MCF_CLK);
+DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
+DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
+DEFINE_CLK(0, "intc.2", 20, MCF_CLK);
+DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "mcfdspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.3", 27, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.2", 34, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.3", 35, MCF_CLK);
+DEFINE_CLK(0, "mcfeport.0", 37, MCF_CLK);
+DEFINE_CLK(0, "mcfadc.0", 38, MCF_CLK);
+DEFINE_CLK(0, "mcfdac.0", 39, MCF_CLK);
+DEFINE_CLK(0, "mcfrtc.0", 42, MCF_CLK);
+DEFINE_CLK(0, "mcfsim.0", 43, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-otg.0", 44, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-host.0", 45, MCF_CLK);
+DEFINE_CLK(0, "mcfddr-sram.0", 46, MCF_CLK);
+DEFINE_CLK(0, "mcfssi.0", 47, MCF_CLK);
+DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
+DEFINE_CLK(0, "mcfrng.0", 49, MCF_CLK);
+DEFINE_CLK(0, "mcfssi.1", 50, MCF_CLK);
+DEFINE_CLK(0, "mcfsdhc.0", 51, MCF_CLK);
+DEFINE_CLK(0, "enet-fec.0", 53, MCF_CLK);
+DEFINE_CLK(0, "enet-fec.1", 54, MCF_CLK);
+DEFINE_CLK(0, "switch.0", 55, MCF_CLK);
+DEFINE_CLK(0, "switch.1", 56, MCF_CLK);
+DEFINE_CLK(0, "nand.0", 63, MCF_CLK);
+
+DEFINE_CLK(1, "mcfow.0", 2, MCF_CLK);
+DEFINE_CLK(1, "mcfi2c.2", 4, MCF_CLK);
+DEFINE_CLK(1, "mcfi2c.3", 5, MCF_CLK);
+DEFINE_CLK(1, "mcfi2c.4", 6, MCF_CLK);
+DEFINE_CLK(1, "mcfi2c.5", 7, MCF_CLK);
+DEFINE_CLK(1, "mcfuart.4", 24, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.5", 25, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.6", 26, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.7", 27, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.8", 28, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.9", 29, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfpwm.0", 34, MCF_BUSCLK);
+DEFINE_CLK(1, "sys.0", 36, MCF_BUSCLK);
+DEFINE_CLK(1, "gpio.0", 37, MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+ &__clk_0_2,
+ &__clk_0_8,
+ &__clk_0_9,
+ &__clk_0_14,
+ &__clk_0_15,
+ &__clk_0_17,
+ &__clk_0_18,
+ &__clk_0_19,
+ &__clk_0_20,
+ &__clk_0_22,
+ &__clk_0_23,
+ &__clk_0_24,
+ &__clk_0_25,
+ &__clk_0_26,
+ &__clk_0_27,
+ &__clk_0_28,
+ &__clk_0_29,
+ &__clk_0_30,
+ &__clk_0_31,
+ &__clk_0_32,
+ &__clk_0_33,
+ &__clk_0_34,
+ &__clk_0_35,
+ &__clk_0_37,
+ &__clk_0_38,
+ &__clk_0_39,
+ &__clk_0_42,
+ &__clk_0_43,
+ &__clk_0_44,
+ &__clk_0_45,
+ &__clk_0_46,
+ &__clk_0_47,
+ &__clk_0_48,
+ &__clk_0_49,
+ &__clk_0_50,
+ &__clk_0_51,
+ &__clk_0_53,
+ &__clk_0_54,
+ &__clk_0_55,
+ &__clk_0_56,
+ &__clk_0_63,
+
+ &__clk_1_2,
+ &__clk_1_4,
+ &__clk_1_5,
+ &__clk_1_6,
+ &__clk_1_7,
+ &__clk_1_24,
+ &__clk_1_25,
+ &__clk_1_26,
+ &__clk_1_27,
+ &__clk_1_28,
+ &__clk_1_29,
+ &__clk_1_34,
+ &__clk_1_36,
+ &__clk_1_37,
+ NULL,
+};
+
+
+static struct clk * const enable_clks[] __initconst = {
+ /* make sure these clocks are enabled */
+ &__clk_0_18, /* intc0 */
+ &__clk_0_19, /* intc0 */
+ &__clk_0_20, /* intc0 */
+ &__clk_0_24, /* uart0 */
+ &__clk_0_25, /* uart1 */
+ &__clk_0_26, /* uart2 */
+ &__clk_0_27, /* uart3 */
+
+ &__clk_0_33, /* pit.1 */
+ &__clk_0_37, /* eport */
+ &__clk_0_48, /* pll */
+
+ &__clk_1_36, /* CCM/reset module/Power management */
+ &__clk_1_37, /* gpio */
+};
+static struct clk * const disable_clks[] __initconst = {
+ &__clk_0_8, /* can.0 */
+ &__clk_0_9, /* can.1 */
+ &__clk_0_14, /* i2c.1 */
+ &__clk_0_15, /* dspi.1 */
+ &__clk_0_17, /* eDMA */
+ &__clk_0_22, /* i2c.0 */
+ &__clk_0_23, /* dspi.0 */
+ &__clk_0_28, /* tmr.1 */
+ &__clk_0_29, /* tmr.2 */
+ &__clk_0_30, /* tmr.2 */
+ &__clk_0_31, /* tmr.3 */
+ &__clk_0_32, /* pit.0 */
+ &__clk_0_34, /* pit.2 */
+ &__clk_0_35, /* pit.3 */
+ &__clk_0_38, /* adc */
+ &__clk_0_39, /* dac */
+ &__clk_0_44, /* usb otg */
+ &__clk_0_45, /* usb host */
+ &__clk_0_47, /* ssi.0 */
+ &__clk_0_49, /* rng */
+ &__clk_0_50, /* ssi.1 */
+ &__clk_0_51, /* eSDHC */
+ &__clk_0_53, /* enet-fec */
+ &__clk_0_54, /* enet-fec */
+ &__clk_0_55, /* switch.0 */
+ &__clk_0_56, /* switch.1 */
+
+ &__clk_1_2, /* 1-wire */
+ &__clk_1_4, /* i2c.2 */
+ &__clk_1_5, /* i2c.3 */
+ &__clk_1_6, /* i2c.4 */
+ &__clk_1_7, /* i2c.5 */
+ &__clk_1_24, /* uart 4 */
+ &__clk_1_25, /* uart 5 */
+ &__clk_1_26, /* uart 6 */
+ &__clk_1_27, /* uart 7 */
+ &__clk_1_28, /* uart 8 */
+ &__clk_1_29, /* uart 9 */
+};
+
+static void __init m5441x_clk_init(void)
+{
+ unsigned i;
+
+ for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
+ __clk_init_enabled(enable_clks[i]);
+ /* make sure these clocks are disabled */
+ for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
+ __clk_init_disabled(disable_clks[i]);
+}
+
+static void __init m5441x_uarts_init(void)
+{
+ __raw_writeb(0x0f, MCFGPIO_PAR_UART0);
+ __raw_writeb(0x00, MCFGPIO_PAR_UART1);
+ __raw_writeb(0x00, MCFGPIO_PAR_UART2);
+}
+
+static void __init m5441x_fec_init(void)
+{
+ __raw_writeb(0x03, MCFGPIO_PAR_FEC);
+}
+
+void __init config_BSP(char *commandp, int size)
+{
+ m5441x_clk_init();
+ mach_sched_init = hw_timer_init;
+ m5441x_uarts_init();
+ m5441x_fec_init();
+}
+
+
+#if IS_ENABLED(CONFIG_RTC_DRV_M5441x)
+static struct resource m5441x_rtc_resources[] = {
+ {
+ .start = MCFRTC_BASE,
+ .end = MCFRTC_BASE + MCFRTC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MCF_IRQ_RTC,
+ .end = MCF_IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device m5441x_rtc = {
+ .name = "mcfrtc",
+ .id = 0,
+ .resource = m5441x_rtc_resources,
+ .num_resources = ARRAY_SIZE(m5441x_rtc_resources),
+};
+#endif
+
+static struct platform_device *m5441x_devices[] __initdata = {
+#if IS_ENABLED(CONFIG_RTC_DRV_M5441x)
+ &m5441x_rtc,
+#endif
+};
+
+static int __init init_BSP(void)
+{
+ platform_add_devices(m5441x_devices, ARRAY_SIZE(m5441x_devices));
+ return 0;
+}
+
+arch_initcall(init_BSP);
diff --git a/arch/m68k/coldfire/m54xx.c b/arch/m68k/coldfire/m54xx.c
new file mode 100644
index 000000000000..952da53aa0bc
--- /dev/null
+++ b/arch/m68k/coldfire/m54xx.c
@@ -0,0 +1,129 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/54xx/config.c
+ *
+ * Copyright (C) 2010, Philippe De Muyter <phdm@macqel.be>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/clk.h>
+#include <linux/bootmem.h>
+#include <asm/pgalloc.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/m54xxsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfclk.h>
+#include <asm/m54xxgpt.h>
+#include <asm/mcfclk.h>
+#ifdef CONFIG_MMU
+#include <asm/mmu_context.h>
+#endif
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+DEFINE_CLK(mcfslt0, "mcfslt.0", MCF_BUSCLK);
+DEFINE_CLK(mcfslt1, "mcfslt.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
+DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
+DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
+DEFINE_CLK(mcfuart3, "mcfuart.3", MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+ &clk_pll,
+ &clk_sys,
+ &clk_mcfslt0,
+ &clk_mcfslt1,
+ &clk_mcfuart0,
+ &clk_mcfuart1,
+ &clk_mcfuart2,
+ &clk_mcfuart3,
+ NULL
+};
+
+/***************************************************************************/
+
+static void __init m54xx_uarts_init(void)
+{
+ /* enable io pins */
+ __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD, MCFGPIO_PAR_PSC0);
+ __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS,
+ MCFGPIO_PAR_PSC1);
+ __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS |
+ MCF_PAR_PSC_CTS_CTS, MCFGPIO_PAR_PSC2);
+ __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD, MCFGPIO_PAR_PSC3);
+}
+
+/***************************************************************************/
+
+static void mcf54xx_reset(void)
+{
+ /* disable interrupts and enable the watchdog */
+ asm("movew #0x2700, %sr\n");
+ __raw_writel(0, MCF_GPT_GMS0);
+ __raw_writel(MCF_GPT_GCIR_CNT(1), MCF_GPT_GCIR0);
+ __raw_writel(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4),
+ MCF_GPT_GMS0);
+}
+
+/***************************************************************************/
+
+#ifdef CONFIG_MMU
+
+unsigned long num_pages;
+
+static void __init mcf54xx_bootmem_alloc(void)
+{
+ unsigned long start_pfn;
+ unsigned long memstart;
+
+ /* _rambase and _ramend will be naturally page aligned */
+ m68k_memory[0].addr = _rambase;
+ m68k_memory[0].size = _ramend - _rambase;
+
+ /* compute total pages in system */
+ num_pages = (_ramend - _rambase) >> PAGE_SHIFT;
+
+ /* page numbers */
+ memstart = PAGE_ALIGN(_ramstart);
+ min_low_pfn = _rambase >> PAGE_SHIFT;
+ start_pfn = memstart >> PAGE_SHIFT;
+ max_low_pfn = _ramend >> PAGE_SHIFT;
+ high_memory = (void *)_ramend;
+
+ m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
+ module_fixup(NULL, __start_fixup, __stop_fixup);
+
+ /* setup bootmem data */
+ m68k_setup_node(0);
+ memstart += init_bootmem_node(NODE_DATA(0), start_pfn,
+ min_low_pfn, max_low_pfn);
+ free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart);
+}
+
+#endif /* CONFIG_MMU */
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#ifdef CONFIG_MMU
+ mcf54xx_bootmem_alloc();
+ mmu_context_init();
+#endif
+ mach_reset = mcf54xx_reset;
+ mach_sched_init = hw_timer_init;
+ m54xx_uarts_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/mcf8390.c b/arch/m68k/coldfire/mcf8390.c
new file mode 100644
index 000000000000..23a6874a3248
--- /dev/null
+++ b/arch/m68k/coldfire/mcf8390.c
@@ -0,0 +1,38 @@
+/*
+ * mcf8390.c -- platform support for 8390 ethernet on many boards
+ *
+ * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/platform_device.h>
+#include <asm/mcf8390.h>
+
+static struct resource mcf8390_resources[] = {
+ {
+ .start = NE2000_ADDR,
+ .end = NE2000_ADDR + NE2000_ADDRSIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = NE2000_IRQ_VECTOR,
+ .end = NE2000_IRQ_VECTOR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static int __init mcf8390_platform_init(void)
+{
+ platform_device_register_simple("mcf8390", -1, mcf8390_resources,
+ ARRAY_SIZE(mcf8390_resources));
+ return 0;
+}
+
+arch_initcall(mcf8390_platform_init);
diff --git a/arch/m68k/coldfire/nettel.c b/arch/m68k/coldfire/nettel.c
new file mode 100644
index 000000000000..ddc48ec1b800
--- /dev/null
+++ b/arch/m68k/coldfire/nettel.c
@@ -0,0 +1,153 @@
+/***************************************************************************/
+
+/*
+ * nettel.c -- startup code support for the NETtel boards
+ *
+ * Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/nettel.h>
+
+/***************************************************************************/
+
+/*
+ * Define the IO and interrupt resources of the 2 SMC9196 interfaces.
+ */
+#define NETTEL_SMC0_ADDR 0x30600300
+#define NETTEL_SMC0_IRQ 29
+
+#define NETTEL_SMC1_ADDR 0x30600000
+#define NETTEL_SMC1_IRQ 27
+
+/*
+ * We need some access into the SMC9196 registers. Define those registers
+ * we will need here (including the smc91x.h doesn't seem to give us these
+ * in a simple form).
+ */
+#define SMC91xx_BANKSELECT 14
+#define SMC91xx_BASEADDR 2
+#define SMC91xx_BASEMAC 4
+
+/***************************************************************************/
+
+static struct resource nettel_smc91x_0_resources[] = {
+ {
+ .start = NETTEL_SMC0_ADDR,
+ .end = NETTEL_SMC0_ADDR + 0x20,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = NETTEL_SMC0_IRQ,
+ .end = NETTEL_SMC0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource nettel_smc91x_1_resources[] = {
+ {
+ .start = NETTEL_SMC1_ADDR,
+ .end = NETTEL_SMC1_ADDR + 0x20,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = NETTEL_SMC1_IRQ,
+ .end = NETTEL_SMC1_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device nettel_smc91x[] = {
+ {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(nettel_smc91x_0_resources),
+ .resource = nettel_smc91x_0_resources,
+ },
+ {
+ .name = "smc91x",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(nettel_smc91x_1_resources),
+ .resource = nettel_smc91x_1_resources,
+ },
+};
+
+static struct platform_device *nettel_devices[] __initdata = {
+ &nettel_smc91x[0],
+ &nettel_smc91x[1],
+};
+
+/***************************************************************************/
+
+static u8 nettel_macdefault[] __initdata = {
+ 0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01,
+};
+
+/*
+ * Set flash contained MAC address into SMC9196 core. Make sure the flash
+ * MAC address is sane, and not an empty flash. If no good use the Moreton
+ * Bay default MAC address instead.
+ */
+
+static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr)
+{
+ u16 *macp;
+
+ macp = (u16 *) flashaddr;
+ if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff))
+ macp = (u16 *) &nettel_macdefault[0];
+
+ writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+ writew(macp[0], ioaddr + SMC91xx_BASEMAC);
+ writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2);
+ writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4);
+}
+
+/***************************************************************************/
+
+/*
+ * Re-map the address space of at least one of the SMC ethernet
+ * parts. Both parts power up decoding the same address, so we
+ * need to move one of them first, before doing anything else.
+ */
+
+static void __init nettel_smc91x_init(void)
+{
+ writew(0x00ec, MCFSIM_PADDR);
+ mcf_setppdata(0, 0x0080);
+ writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+ writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
+ mcf_setppdata(0x0080, 0);
+
+ /* Set correct chip select timing for SMC9196 accesses */
+ writew(0x1180, MCFSIM_CSCR3);
+
+ /* Set the SMC interrupts to be auto-vectored */
+ mcf_autovector(NETTEL_SMC0_IRQ);
+ mcf_autovector(NETTEL_SMC1_IRQ);
+
+ /* Set MAC addresses from flash for both interfaces */
+ nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000);
+ nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006);
+}
+
+/***************************************************************************/
+
+static int __init init_nettel(void)
+{
+ nettel_smc91x_init();
+ platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices));
+ return 0;
+}
+
+arch_initcall(init_nettel);
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/pci.c b/arch/m68k/coldfire/pci.c
new file mode 100644
index 000000000000..df9679238b6d
--- /dev/null
+++ b/arch/m68k/coldfire/pci.c
@@ -0,0 +1,325 @@
+/*
+ * pci.c -- PCI bus support for ColdFire processors
+ *
+ * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/m54xxpci.h>
+
+/*
+ * Memory and IO mappings. We use a 1:1 mapping for local host memory to
+ * PCI bus memory (no reason not to really). IO space doesn't matter, we
+ * always use access functions for that. The device configuration space is
+ * mapped over the IO map space when we enable it in the PCICAR register.
+ */
+#define PCI_MEM_PA 0xf0000000 /* Host physical address */
+#define PCI_MEM_BA 0xf0000000 /* Bus physical address */
+#define PCI_MEM_SIZE 0x08000000 /* 128 MB */
+#define PCI_MEM_MASK (PCI_MEM_SIZE - 1)
+
+#define PCI_IO_PA 0xf8000000 /* Host physical address */
+#define PCI_IO_BA 0x00000000 /* Bus physical address */
+#define PCI_IO_SIZE 0x00010000 /* 64k */
+#define PCI_IO_MASK (PCI_IO_SIZE - 1)
+
+static struct pci_bus *rootbus;
+static unsigned long iospace;
+
+/*
+ * We need to be carefull probing on bus 0 (directly connected to host
+ * bridge). We should only acccess the well defined possible devices in
+ * use, ignore aliases and the like.
+ */
+static unsigned char mcf_host_slot2sid[32] = {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 1, 2, 0, 3, 4, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+};
+
+static unsigned char mcf_host_irq[] = {
+ 0, 69, 69, 71, 71,
+};
+
+
+static inline void syncio(void)
+{
+ /* The ColdFire "nop" instruction waits for all bus IO to complete */
+ __asm__ __volatile__ ("nop");
+}
+
+/*
+ * Configuration space access functions. Configuration space access is
+ * through the IO mapping window, enabling it via the PCICAR register.
+ */
+static unsigned long mcf_mk_pcicar(int bus, unsigned int devfn, int where)
+{
+ return (bus << PCICAR_BUSN) | (devfn << PCICAR_DEVFNN) | (where & 0xfc);
+}
+
+static int mcf_pci_readconfig(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ unsigned long addr;
+
+ *value = 0xffffffff;
+
+ if (bus->number == 0) {
+ if (mcf_host_slot2sid[PCI_SLOT(devfn)] == 0)
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ syncio();
+ addr = mcf_mk_pcicar(bus->number, devfn, where);
+ __raw_writel(PCICAR_E | addr, PCICAR);
+ addr = iospace + (where & 0x3);
+
+ switch (size) {
+ case 1:
+ *value = __raw_readb(addr);
+ break;
+ case 2:
+ *value = le16_to_cpu(__raw_readw(addr));
+ break;
+ default:
+ *value = le32_to_cpu(__raw_readl(addr));
+ break;
+ }
+
+ syncio();
+ __raw_writel(0, PCICAR);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int mcf_pci_writeconfig(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ unsigned long addr;
+
+ if (bus->number == 0) {
+ if (mcf_host_slot2sid[PCI_SLOT(devfn)] == 0)
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ syncio();
+ addr = mcf_mk_pcicar(bus->number, devfn, where);
+ __raw_writel(PCICAR_E | addr, PCICAR);
+ addr = iospace + (where & 0x3);
+
+ switch (size) {
+ case 1:
+ __raw_writeb(value, addr);
+ break;
+ case 2:
+ __raw_writew(cpu_to_le16(value), addr);
+ break;
+ default:
+ __raw_writel(cpu_to_le32(value), addr);
+ break;
+ }
+
+ syncio();
+ __raw_writel(0, PCICAR);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops mcf_pci_ops = {
+ .read = mcf_pci_readconfig,
+ .write = mcf_pci_writeconfig,
+};
+
+/*
+ * IO address space access functions. Pretty strait forward, these are
+ * directly mapped in to the IO mapping window. And that is mapped into
+ * virtual address space.
+ */
+u8 mcf_pci_inb(u32 addr)
+{
+ return __raw_readb(iospace + (addr & PCI_IO_MASK));
+}
+EXPORT_SYMBOL(mcf_pci_inb);
+
+u16 mcf_pci_inw(u32 addr)
+{
+ return le16_to_cpu(__raw_readw(iospace + (addr & PCI_IO_MASK)));
+}
+EXPORT_SYMBOL(mcf_pci_inw);
+
+u32 mcf_pci_inl(u32 addr)
+{
+ return le32_to_cpu(__raw_readl(iospace + (addr & PCI_IO_MASK)));
+}
+EXPORT_SYMBOL(mcf_pci_inl);
+
+void mcf_pci_insb(u32 addr, u8 *buf, u32 len)
+{
+ for (; len; len--)
+ *buf++ = mcf_pci_inb(addr);
+}
+EXPORT_SYMBOL(mcf_pci_insb);
+
+void mcf_pci_insw(u32 addr, u16 *buf, u32 len)
+{
+ for (; len; len--)
+ *buf++ = mcf_pci_inw(addr);
+}
+EXPORT_SYMBOL(mcf_pci_insw);
+
+void mcf_pci_insl(u32 addr, u32 *buf, u32 len)
+{
+ for (; len; len--)
+ *buf++ = mcf_pci_inl(addr);
+}
+EXPORT_SYMBOL(mcf_pci_insl);
+
+void mcf_pci_outb(u8 v, u32 addr)
+{
+ __raw_writeb(v, iospace + (addr & PCI_IO_MASK));
+}
+EXPORT_SYMBOL(mcf_pci_outb);
+
+void mcf_pci_outw(u16 v, u32 addr)
+{
+ __raw_writew(cpu_to_le16(v), iospace + (addr & PCI_IO_MASK));
+}
+EXPORT_SYMBOL(mcf_pci_outw);
+
+void mcf_pci_outl(u32 v, u32 addr)
+{
+ __raw_writel(cpu_to_le32(v), iospace + (addr & PCI_IO_MASK));
+}
+EXPORT_SYMBOL(mcf_pci_outl);
+
+void mcf_pci_outsb(u32 addr, const u8 *buf, u32 len)
+{
+ for (; len; len--)
+ mcf_pci_outb(*buf++, addr);
+}
+EXPORT_SYMBOL(mcf_pci_outsb);
+
+void mcf_pci_outsw(u32 addr, const u16 *buf, u32 len)
+{
+ for (; len; len--)
+ mcf_pci_outw(*buf++, addr);
+}
+EXPORT_SYMBOL(mcf_pci_outsw);
+
+void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len)
+{
+ for (; len; len--)
+ mcf_pci_outl(*buf++, addr);
+}
+EXPORT_SYMBOL(mcf_pci_outsl);
+
+/*
+ * Initialize the PCI bus registers, and scan the bus.
+ */
+static struct resource mcf_pci_mem = {
+ .name = "PCI Memory space",
+ .start = PCI_MEM_PA,
+ .end = PCI_MEM_PA + PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource mcf_pci_io = {
+ .name = "PCI IO space",
+ .start = 0x400,
+ .end = 0x10000 - 1,
+ .flags = IORESOURCE_IO,
+};
+
+/*
+ * Interrupt mapping and setting.
+ */
+static int mcf_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int sid;
+
+ sid = mcf_host_slot2sid[slot];
+ if (sid)
+ return mcf_host_irq[sid];
+ return 0;
+}
+
+static int __init mcf_pci_init(void)
+{
+ pr_info("ColdFire: PCI bus initialization...\n");
+
+ /* Reset the external PCI bus */
+ __raw_writel(PCIGSCR_RESET, PCIGSCR);
+ __raw_writel(0, PCITCR);
+
+ request_resource(&iomem_resource, &mcf_pci_mem);
+ request_resource(&iomem_resource, &mcf_pci_io);
+
+ /* Configure PCI arbiter */
+ __raw_writel(PACR_INTMPRI | PACR_INTMINTE | PACR_EXTMPRI(0x1f) |
+ PACR_EXTMINTE(0x1f), PACR);
+
+ /* Set required multi-function pins for PCI bus use */
+ __raw_writew(0x3ff, MCFGPIO_PAR_PCIBG);
+ __raw_writew(0x3ff, MCFGPIO_PAR_PCIBR);
+
+ /* Set up config space for local host bus controller */
+ __raw_writel(PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+ PCI_COMMAND_INVALIDATE, PCISCR);
+ __raw_writel(PCICR1_LT(32) | PCICR1_CL(8), PCICR1);
+ __raw_writel(0, PCICR2);
+
+ /*
+ * Set up the initiator windows for memory and IO mapping.
+ * These give the CPU bus access onto the PCI bus. One for each of
+ * PCI memory and IO address spaces.
+ */
+ __raw_writel(WXBTAR(PCI_MEM_PA, PCI_MEM_BA, PCI_MEM_SIZE),
+ PCIIW0BTAR);
+ __raw_writel(WXBTAR(PCI_IO_PA, PCI_IO_BA, PCI_IO_SIZE),
+ PCIIW1BTAR);
+ __raw_writel(PCIIWCR_W0_MEM /*| PCIIWCR_W0_MRDL*/ | PCIIWCR_W0_E |
+ PCIIWCR_W1_IO | PCIIWCR_W1_E, PCIIWCR);
+
+ /*
+ * Set up the target windows for access from the PCI bus back to the
+ * CPU bus. All we need is access to system RAM (for mastering).
+ */
+ __raw_writel(CONFIG_RAMBASE, PCIBAR1);
+ __raw_writel(CONFIG_RAMBASE | PCITBATR1_E, PCITBATR1);
+
+ /* Keep a virtual mapping to IO/config space active */
+ iospace = (unsigned long) ioremap(PCI_IO_PA, PCI_IO_SIZE);
+ if (iospace == 0)
+ return -ENODEV;
+ pr_info("Coldfire: PCI IO/config window mapped to 0x%x\n",
+ (u32) iospace);
+
+ /* Turn of PCI reset, and wait for devices to settle */
+ __raw_writel(0, PCIGSCR);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(msecs_to_jiffies(200));
+
+ rootbus = pci_scan_bus(0, &mcf_pci_ops, NULL);
+ rootbus->resource[0] = &mcf_pci_io;
+ rootbus->resource[1] = &mcf_pci_mem;
+
+ pci_fixup_irqs(pci_common_swizzle, mcf_pci_map_irq);
+ pci_bus_size_bridges(rootbus);
+ pci_bus_assign_resources(rootbus);
+ return 0;
+}
+
+subsys_initcall(mcf_pci_init);
diff --git a/arch/m68k/coldfire/pit.c b/arch/m68k/coldfire/pit.c
new file mode 100644
index 000000000000..493b3111d4c1
--- /dev/null
+++ b/arch/m68k/coldfire/pit.c
@@ -0,0 +1,167 @@
+/***************************************************************************/
+
+/*
+ * pit.c -- Freescale ColdFire PIT timer. Currently this type of
+ * hardware timer only exists in the Freescale ColdFire
+ * 5270/5271, 5282 and 5208 CPUs. No doubt newer ColdFire
+ * family members will probably use it too.
+ *
+ * Copyright (C) 1999-2008, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfpit.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+/*
+ * By default use timer1 as the system clock timer.
+ */
+#define FREQ ((MCF_CLK / 2) / 64)
+#define TA(a) (MCFPIT_BASE1 + (a))
+#define PIT_CYCLES_PER_JIFFY (FREQ / HZ)
+
+static u32 pit_cnt;
+
+/*
+ * Initialize the PIT timer.
+ *
+ * This is also called after resume to bring the PIT into operation again.
+ */
+
+static void init_cf_pit_timer(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+
+ __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+ __raw_writew(PIT_CYCLES_PER_JIFFY, TA(MCFPIT_PMR));
+ __raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+ MCFPIT_PCSR_OVW | MCFPIT_PCSR_RLD | \
+ MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
+ break;
+
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+
+ __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+
+ __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+ __raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+ MCFPIT_PCSR_OVW | MCFPIT_PCSR_CLK64, \
+ TA(MCFPIT_PCSR));
+ break;
+
+ case CLOCK_EVT_MODE_RESUME:
+ /* Nothing to do here */
+ break;
+ }
+}
+
+/*
+ * Program the next event in oneshot mode
+ *
+ * Delta is given in PIT ticks
+ */
+static int cf_pit_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ __raw_writew(delta, TA(MCFPIT_PMR));
+ return 0;
+}
+
+struct clock_event_device cf_pit_clockevent = {
+ .name = "pit",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = init_cf_pit_timer,
+ .set_next_event = cf_pit_next_event,
+ .shift = 32,
+ .irq = MCF_IRQ_PIT1,
+};
+
+
+
+/***************************************************************************/
+
+static irqreturn_t pit_tick(int irq, void *dummy)
+{
+ struct clock_event_device *evt = &cf_pit_clockevent;
+ u16 pcsr;
+
+ /* Reset the ColdFire timer */
+ pcsr = __raw_readw(TA(MCFPIT_PCSR));
+ __raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR));
+
+ pit_cnt += PIT_CYCLES_PER_JIFFY;
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+/***************************************************************************/
+
+static struct irqaction pit_irq = {
+ .name = "timer",
+ .flags = IRQF_TIMER,
+ .handler = pit_tick,
+};
+
+/***************************************************************************/
+
+static cycle_t pit_read_clk(struct clocksource *cs)
+{
+ unsigned long flags;
+ u32 cycles;
+ u16 pcntr;
+
+ local_irq_save(flags);
+ pcntr = __raw_readw(TA(MCFPIT_PCNTR));
+ cycles = pit_cnt;
+ local_irq_restore(flags);
+
+ return cycles + PIT_CYCLES_PER_JIFFY - pcntr;
+}
+
+/***************************************************************************/
+
+static struct clocksource pit_clk = {
+ .name = "pit",
+ .rating = 100,
+ .read = pit_read_clk,
+ .mask = CLOCKSOURCE_MASK(32),
+};
+
+/***************************************************************************/
+
+void hw_timer_init(irq_handler_t handler)
+{
+ cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id());
+ cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
+ cf_pit_clockevent.max_delta_ns =
+ clockevent_delta2ns(0xFFFF, &cf_pit_clockevent);
+ cf_pit_clockevent.min_delta_ns =
+ clockevent_delta2ns(0x3f, &cf_pit_clockevent);
+ clockevents_register_device(&cf_pit_clockevent);
+
+ setup_irq(MCF_IRQ_PIT1, &pit_irq);
+
+ clocksource_register_hz(&pit_clk, FREQ);
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/reset.c b/arch/m68k/coldfire/reset.c
new file mode 100644
index 000000000000..f30952f0cbe6
--- /dev/null
+++ b/arch/m68k/coldfire/reset.c
@@ -0,0 +1,50 @@
+/*
+ * reset.c -- common ColdFire SoC reset support
+ *
+ * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/*
+ * There are 2 common methods amongst the ColdFure parts for reseting
+ * the CPU. But there are couple of exceptions, the 5272 and the 547x
+ * have something completely special to them, and we let their specific
+ * subarch code handle them.
+ */
+
+#ifdef MCFSIM_SYPCR
+static void mcf_cpu_reset(void)
+{
+ local_irq_disable();
+ /* Set watchdog to soft reset, and enabled */
+ __raw_writeb(0xc0, MCFSIM_SYPCR);
+ for (;;)
+ /* wait for watchdog to timeout */;
+}
+#endif
+
+#ifdef MCF_RCR
+static void mcf_cpu_reset(void)
+{
+ local_irq_disable();
+ __raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
+}
+#endif
+
+static int __init mcf_setup_reset(void)
+{
+ mach_reset = mcf_cpu_reset;
+ return 0;
+}
+
+arch_initcall(mcf_setup_reset);
diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
new file mode 100644
index 000000000000..831a08cf6f40
--- /dev/null
+++ b/arch/m68k/coldfire/sltimers.c
@@ -0,0 +1,149 @@
+/***************************************************************************/
+
+/*
+ * sltimers.c -- generic ColdFire slice timer support.
+ *
+ * Copyright (C) 2009-2010, Philippe De Muyter <phdm@macqel.be>
+ * based on
+ * timers.c -- generic ColdFire hardware timer support.
+ * Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/clocksource.h>
+#include <asm/io.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfslt.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+#ifdef CONFIG_HIGHPROFILE
+
+/*
+ * By default use Slice Timer 1 as the profiler clock timer.
+ */
+#define PA(a) (MCFSLT_TIMER1 + (a))
+
+/*
+ * Choose a reasonably fast profile timer. Make it an odd value to
+ * try and get good coverage of kernel operations.
+ */
+#define PROFILEHZ 1013
+
+irqreturn_t mcfslt_profile_tick(int irq, void *dummy)
+{
+ /* Reset Slice Timer 1 */
+ __raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, PA(MCFSLT_SSR));
+ if (current->pid)
+ profile_tick(CPU_PROFILING);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction mcfslt_profile_irq = {
+ .name = "profile timer",
+ .flags = IRQF_TIMER,
+ .handler = mcfslt_profile_tick,
+};
+
+void mcfslt_profile_init(void)
+{
+ printk(KERN_INFO "PROFILE: lodging TIMER 1 @ %dHz as profile timer\n",
+ PROFILEHZ);
+
+ setup_irq(MCF_IRQ_PROFILER, &mcfslt_profile_irq);
+
+ /* Set up TIMER 2 as high speed profile clock */
+ __raw_writel(MCF_BUSCLK / PROFILEHZ - 1, PA(MCFSLT_STCNT));
+ __raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN,
+ PA(MCFSLT_SCR));
+
+}
+
+#endif /* CONFIG_HIGHPROFILE */
+
+/***************************************************************************/
+
+/*
+ * By default use Slice Timer 0 as the system clock timer.
+ */
+#define TA(a) (MCFSLT_TIMER0 + (a))
+
+static u32 mcfslt_cycles_per_jiffy;
+static u32 mcfslt_cnt;
+
+static irq_handler_t timer_interrupt;
+
+static irqreturn_t mcfslt_tick(int irq, void *dummy)
+{
+ /* Reset Slice Timer 0 */
+ __raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
+ mcfslt_cnt += mcfslt_cycles_per_jiffy;
+ return timer_interrupt(irq, dummy);
+}
+
+static struct irqaction mcfslt_timer_irq = {
+ .name = "timer",
+ .flags = IRQF_TIMER,
+ .handler = mcfslt_tick,
+};
+
+static cycle_t mcfslt_read_clk(struct clocksource *cs)
+{
+ unsigned long flags;
+ u32 cycles, scnt;
+
+ local_irq_save(flags);
+ scnt = __raw_readl(TA(MCFSLT_SCNT));
+ cycles = mcfslt_cnt;
+ if (__raw_readl(TA(MCFSLT_SSR)) & MCFSLT_SSR_TE) {
+ cycles += mcfslt_cycles_per_jiffy;
+ scnt = __raw_readl(TA(MCFSLT_SCNT));
+ }
+ local_irq_restore(flags);
+
+ /* subtract because slice timers count down */
+ return cycles + ((mcfslt_cycles_per_jiffy - 1) - scnt);
+}
+
+static struct clocksource mcfslt_clk = {
+ .name = "slt",
+ .rating = 250,
+ .read = mcfslt_read_clk,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void hw_timer_init(irq_handler_t handler)
+{
+ mcfslt_cycles_per_jiffy = MCF_BUSCLK / HZ;
+ /*
+ * The coldfire slice timer (SLT) runs from STCNT to 0 included,
+ * then STCNT again and so on. It counts thus actually
+ * STCNT + 1 steps for 1 tick, not STCNT. So if you want
+ * n cycles, initialize STCNT with n - 1.
+ */
+ __raw_writel(mcfslt_cycles_per_jiffy - 1, TA(MCFSLT_STCNT));
+ __raw_writel(MCFSLT_SCR_RUN | MCFSLT_SCR_IEN | MCFSLT_SCR_TEN,
+ TA(MCFSLT_SCR));
+ /* initialize mcfslt_cnt knowing that slice timers count down */
+ mcfslt_cnt = mcfslt_cycles_per_jiffy;
+
+ timer_interrupt = handler;
+ setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
+
+ clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
+
+#ifdef CONFIG_HIGHPROFILE
+ mcfslt_profile_init();
+#endif
+}
diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
new file mode 100644
index 000000000000..cd496a20fcc7
--- /dev/null
+++ b/arch/m68k/coldfire/timers.c
@@ -0,0 +1,195 @@
+/***************************************************************************/
+
+/*
+ * timers.c -- generic ColdFire hardware timer support.
+ *
+ * Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/clocksource.h>
+#include <asm/io.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcftimer.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+/*
+ * By default use timer1 as the system clock timer.
+ */
+#define FREQ (MCF_BUSCLK / 16)
+#define TA(a) (MCFTIMER_BASE1 + (a))
+
+/*
+ * These provide the underlying interrupt vector support.
+ * Unfortunately it is a little different on each ColdFire.
+ */
+void coldfire_profile_init(void);
+
+#if defined(CONFIG_M53xx) || defined(CONFIG_M5441x)
+#define __raw_readtrr __raw_readl
+#define __raw_writetrr __raw_writel
+#else
+#define __raw_readtrr __raw_readw
+#define __raw_writetrr __raw_writew
+#endif
+
+static u32 mcftmr_cycles_per_jiffy;
+static u32 mcftmr_cnt;
+
+static irq_handler_t timer_interrupt;
+
+/***************************************************************************/
+
+static void init_timer_irq(void)
+{
+#ifdef MCFSIM_ICR_AUTOVEC
+ /* Timer1 is always used as system timer */
+ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+ MCFSIM_TIMER1ICR);
+ mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
+
+#ifdef CONFIG_HIGHPROFILE
+ /* Timer2 is to be used as a high speed profile timer */
+ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+ MCFSIM_TIMER2ICR);
+ mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
+#endif
+#endif /* MCFSIM_ICR_AUTOVEC */
+}
+
+/***************************************************************************/
+
+static irqreturn_t mcftmr_tick(int irq, void *dummy)
+{
+ /* Reset the ColdFire timer */
+ __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
+
+ mcftmr_cnt += mcftmr_cycles_per_jiffy;
+ return timer_interrupt(irq, dummy);
+}
+
+/***************************************************************************/
+
+static struct irqaction mcftmr_timer_irq = {
+ .name = "timer",
+ .flags = IRQF_TIMER,
+ .handler = mcftmr_tick,
+};
+
+/***************************************************************************/
+
+static cycle_t mcftmr_read_clk(struct clocksource *cs)
+{
+ unsigned long flags;
+ u32 cycles;
+ u16 tcn;
+
+ local_irq_save(flags);
+ tcn = __raw_readw(TA(MCFTIMER_TCN));
+ cycles = mcftmr_cnt;
+ local_irq_restore(flags);
+
+ return cycles + tcn;
+}
+
+/***************************************************************************/
+
+static struct clocksource mcftmr_clk = {
+ .name = "tmr",
+ .rating = 250,
+ .read = mcftmr_read_clk,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/***************************************************************************/
+
+void hw_timer_init(irq_handler_t handler)
+{
+ __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
+ mcftmr_cycles_per_jiffy = FREQ / HZ;
+ /*
+ * The coldfire timer runs from 0 to TRR included, then 0
+ * again and so on. It counts thus actually TRR + 1 steps
+ * for 1 tick, not TRR. So if you want n cycles,
+ * initialize TRR with n - 1.
+ */
+ __raw_writetrr(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR));
+ __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+ MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
+
+ clocksource_register_hz(&mcftmr_clk, FREQ);
+
+ timer_interrupt = handler;
+ init_timer_irq();
+ setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
+
+#ifdef CONFIG_HIGHPROFILE
+ coldfire_profile_init();
+#endif
+}
+
+/***************************************************************************/
+#ifdef CONFIG_HIGHPROFILE
+/***************************************************************************/
+
+/*
+ * By default use timer2 as the profiler clock timer.
+ */
+#define PA(a) (MCFTIMER_BASE2 + (a))
+
+/*
+ * Choose a reasonably fast profile timer. Make it an odd value to
+ * try and get good coverage of kernel operations.
+ */
+#define PROFILEHZ 1013
+
+/*
+ * Use the other timer to provide high accuracy profiling info.
+ */
+irqreturn_t coldfire_profile_tick(int irq, void *dummy)
+{
+ /* Reset ColdFire timer2 */
+ __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
+ if (current->pid)
+ profile_tick(CPU_PROFILING);
+ return IRQ_HANDLED;
+}
+
+/***************************************************************************/
+
+static struct irqaction coldfire_profile_irq = {
+ .name = "profile timer",
+ .flags = IRQF_TIMER,
+ .handler = coldfire_profile_tick,
+};
+
+void coldfire_profile_init(void)
+{
+ printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
+ PROFILEHZ);
+
+ /* Set up TIMER 2 as high speed profile clock */
+ __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
+
+ __raw_writetrr(((MCF_BUSCLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
+ __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+ MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
+
+ setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq);
+}
+
+/***************************************************************************/
+#endif /* CONFIG_HIGHPROFILE */
+/***************************************************************************/
diff --git a/arch/m68k/coldfire/vectors.c b/arch/m68k/coldfire/vectors.c
new file mode 100644
index 000000000000..a4dbdecbec7a
--- /dev/null
+++ b/arch/m68k/coldfire/vectors.c
@@ -0,0 +1,70 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/coldfire/vectors.c
+ *
+ * Copyright (C) 1999-2007, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfwdebug.h>
+
+/***************************************************************************/
+
+#ifdef TRAP_DBG_INTERRUPT
+
+asmlinkage void dbginterrupt_c(struct frame *fp)
+{
+ extern void dump(struct pt_regs *fp);
+ printk(KERN_DEBUG "%s(%d): BUS ERROR TRAP\n", __FILE__, __LINE__);
+ dump((struct pt_regs *) fp);
+ asm("halt");
+}
+
+#endif
+
+/***************************************************************************/
+
+/* Assembler routines */
+asmlinkage void buserr(void);
+asmlinkage void trap(void);
+asmlinkage void system_call(void);
+asmlinkage void inthandler(void);
+
+void __init trap_init(void)
+{
+ int i;
+
+ /*
+ * There is a common trap handler and common interrupt
+ * handler that handle almost every vector. We treat
+ * the system call and bus error special, they get their
+ * own first level handlers.
+ */
+ for (i = 3; (i <= 23); i++)
+ _ramvec[i] = trap;
+ for (i = 33; (i <= 63); i++)
+ _ramvec[i] = trap;
+ for (i = 24; (i <= 31); i++)
+ _ramvec[i] = inthandler;
+ for (i = 64; (i < 255); i++)
+ _ramvec[i] = inthandler;
+ _ramvec[255] = 0;
+
+ _ramvec[2] = buserr;
+ _ramvec[32] = system_call;
+
+#ifdef TRAP_DBG_INTERRUPT
+ _ramvec[12] = dbginterrupt;
+#endif
+}
+
+/***************************************************************************/