summaryrefslogtreecommitdiffstats
path: root/arch/i386
diff options
context:
space:
mode:
authorAlan Cox <alan@lxorguk.ukuu.org.uk>2006-10-04 00:41:26 +0100
committerGreg Kroah-Hartman <gregkh@suse.de>2006-12-01 14:36:56 -0800
commit368c73d4f689dae0807d0a2aa74c61fd2b9b075f (patch)
tree4887ca05d1c02521d6194f88970f7c23d8aeb4ba /arch/i386
parentcc692a5f1e9816671b77da77c6d6c463156ba1c7 (diff)
downloadlinux-368c73d4f689dae0807d0a2aa74c61fd2b9b075f.tar.bz2
PCI: quirks: fix the festering mess that claims to handle IDE quirks
The number of permutations of crap we do is amazing and almost all of it has the wrong effect in 2.6. At the heart of this is the PCI SFF magic which says that compatibility mode PCI IDE controllers use ISA IRQ routing and hard coded addresses not the BAR values. The old quirks variously clears them, sets them, adjusts them and then IDE ignores the result. In order to drive all this garbage out and to do it portably we need to handle the SFF rules directly and properly. Because we know the device BAR 0-3 are not used in compatibility mode we load them with the values that are implied (and indeed which many controllers actually thoughtfully put there in this mode anyway). This removes special cases in the IDE layer and libata which now knows that bar 0/1/2/3 always contain the correct address. It means our resource allocation map is accurate from boot, not "mostly accurate" after ide is loaded, and it shoots lots of code. There is also lots more code and magic constant knowledge to shoot once this is in and settled. Been in my test tree for a while both with drivers/ide and with libata. Wants some -mm shakedown in case I've missed something dumb or there are corner cases lurking. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'arch/i386')
-rw-r--r--arch/i386/pci/fixup.c46
1 files changed, 0 insertions, 46 deletions
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
index c1949ff38d61..cde1170b01a1 100644
--- a/arch/i386/pci/fixup.c
+++ b/arch/i386/pci/fixup.c
@@ -74,52 +74,6 @@ static void __devinit pci_fixup_ncr53c810(struct pci_dev *d)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810);
-static void __devinit pci_fixup_ide_bases(struct pci_dev *d)
-{
- int i;
-
- /*
- * PCI IDE controllers use non-standard I/O port decoding, respect it.
- */
- if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
- return;
- DBG("PCI: IDE base address fixup for %s\n", pci_name(d));
- for(i=0; i<4; i++) {
- struct resource *r = &d->resource[i];
- if ((r->start & ~0x80) == 0x374) {
- r->start |= 2;
- r->end = r->start;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-static void __devinit pci_fixup_ide_trash(struct pci_dev *d)
-{
- int i;
-
- /*
- * Runs the fixup only for the first IDE controller
- * (Shai Fultheim - shai@ftcon.com)
- */
- static int called = 0;
- if (called)
- return;
- called = 1;
-
- /*
- * There exist PCI IDE controllers which have utter garbage
- * in first four base registers. Ignore that.
- */
- DBG("PCI: IDE base address trash cleared for %s\n", pci_name(d));
- for(i=0; i<4; i++)
- d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, pci_fixup_ide_trash);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_11, pci_fixup_ide_trash);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_9, pci_fixup_ide_trash);
-
static void __devinit pci_fixup_latency(struct pci_dev *d)
{
/*