c6x: remove architecture

The c6x architecture was added to the kernel in 2011 at a time when
running Linux on DSPs was widely seen as the logical evolution.
It appears the trend has gone back to running Linux on Arm based SoCs
with DSP, using a better supported software ecosystem, and having better
real-time behavior for the DSP code. An example of this is TI's own
Keystone2 platform.

The upstream kernel port appears to no longer have any users. Mark
Salter remained avaialable to review patches, but mentioned that
he no longer has access to working hardware himself. Without any
users, it's best to just remove the code completely to reduce the
work for cross-architecture code changes.

Many thanks to Mark for maintaining the code for the past ten years.

Link: https://lore.kernel.org/lkml/41dc7795afda9f776d8cd0d3075f776cf586e97c.camel@redhat.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 736 deletions

diff --git a/arch/c6x/kernel/entry.S b/arch/c6x/kernel/entry.S
deleted file mode 100644
index fb154d19625b..000000000000
--- a/arch/c6x/kernel/entry.S
+++ /dev/null
@@ -1,736 +0,0 @@
-; SPDX-License-Identifier: GPL-2.0-only
-;
-;  Port on Texas Instruments TMS320C6x architecture
-;
-;  Copyright (C) 2004-2011 Texas Instruments Incorporated
-;  Author: Aurelien Jacquiot (aurelien.jacquiot@virtuallogix.com)
-;  Updated for 2.6.34: Mark Salter <msalter@redhat.com>
-;
-
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-
-; Registers naming
-#define DP	B14
-#define SP	B15
-
-#ifndef CONFIG_PREEMPTION
-#define resume_kernel restore_all
-#endif
-
-	.altmacro
-
-	.macro MASK_INT reg
-	MVC	.S2	CSR,reg
-	CLR	.S2	reg,0,0,reg
-	MVC	.S2	reg,CSR
-	.endm
-
-	.macro UNMASK_INT reg
-	MVC	.S2	CSR,reg
-	SET	.S2	reg,0,0,reg
-	MVC	.S2	reg,CSR
-	.endm
-
-	.macro GET_THREAD_INFO reg
-	SHR	.S1X	SP,THREAD_SHIFT,reg
-	SHL	.S1	reg,THREAD_SHIFT,reg
-	.endm
-
-	;;
-	;;  This defines the normal kernel pt_regs layout.
-	;;
-	.macro SAVE_ALL __rp __tsr
-	STW	.D2T2	B0,*SP--[2]		; save original B0
-	MVKL	.S2	current_ksp,B0
-	MVKH	.S2	current_ksp,B0
-	LDW	.D2T2	*B0,B1			; KSP
-
-	NOP	3
-	STW	.D2T2	B1,*+SP[1]		; save original B1
-	XOR	.D2	SP,B1,B0		; (SP ^ KSP)
-	LDW	.D2T2	*+SP[1],B1		; restore B0/B1
-	LDW	.D2T2	*++SP[2],B0
-	SHR	.S2	B0,THREAD_SHIFT,B0	; 0 if already using kstack
-  [B0]	STDW	.D2T2	SP:DP,*--B1[1]		; user: save user sp/dp kstack
-  [B0]	MV	.S2	B1,SP			;    and switch to kstack
-||[!B0] STDW	.D2T2	SP:DP,*--SP[1]		; kernel: save on current stack
-
-	SUBAW	.D2	SP,2,SP
-
-	ADD	.D1X	SP,-8,A15
- ||	STDW	.D2T1	A15:A14,*SP--[16]	; save A15:A14
-
-	STDW	.D2T2	B13:B12,*SP--[1]
- ||	STDW	.D1T1	A13:A12,*A15--[1]
- ||	MVC	.S2	__rp,B13
-
-	STDW	.D2T2	B11:B10,*SP--[1]
- ||	STDW	.D1T1	A11:A10,*A15--[1]
- ||	MVC	.S2	CSR,B12
-
-	STDW	.D2T2	B9:B8,*SP--[1]
- ||	STDW	.D1T1	A9:A8,*A15--[1]
- ||	MVC	.S2	RILC,B11
-	STDW	.D2T2	B7:B6,*SP--[1]
- ||	STDW	.D1T1	A7:A6,*A15--[1]
- ||	MVC	.S2	ILC,B10
-
-	STDW	.D2T2	B5:B4,*SP--[1]
- ||	STDW	.D1T1	A5:A4,*A15--[1]
-
-	STDW	.D2T2	B3:B2,*SP--[1]
- ||	STDW	.D1T1	A3:A2,*A15--[1]
- ||	MVC	.S2	__tsr,B5
-
-	STDW	.D2T2	B1:B0,*SP--[1]
- ||	STDW	.D1T1	A1:A0,*A15--[1]
- ||	MV	.S1X	B5,A5
-
-	STDW	.D2T2	B31:B30,*SP--[1]
- ||	STDW	.D1T1	A31:A30,*A15--[1]
-	STDW	.D2T2	B29:B28,*SP--[1]
- ||	STDW	.D1T1	A29:A28,*A15--[1]
-	STDW	.D2T2	B27:B26,*SP--[1]
- ||	STDW	.D1T1	A27:A26,*A15--[1]
-	STDW	.D2T2	B25:B24,*SP--[1]
- ||	STDW	.D1T1	A25:A24,*A15--[1]
-	STDW	.D2T2	B23:B22,*SP--[1]
- ||	STDW	.D1T1	A23:A22,*A15--[1]
-	STDW	.D2T2	B21:B20,*SP--[1]
- ||	STDW	.D1T1	A21:A20,*A15--[1]
-	STDW	.D2T2	B19:B18,*SP--[1]
- ||	STDW	.D1T1	A19:A18,*A15--[1]
-	STDW	.D2T2	B17:B16,*SP--[1]
- ||	STDW	.D1T1	A17:A16,*A15--[1]
-
-	STDW	.D2T2	B13:B12,*SP--[1]	; save PC and CSR
-
-	STDW	.D2T2	B11:B10,*SP--[1]	; save RILC and ILC
-	STDW	.D2T1	A5:A4,*SP--[1]		; save TSR and orig A4
-
-	;; We left an unused word on the stack just above pt_regs.
-	;; It is used to save whether or not this frame is due to
-	;; a syscall. It is cleared here, but the syscall handler
-	;; sets it to a non-zero value.
-	MVK	.L2	0,B1
-	STW	.D2T2	B1,*+SP(REGS__END+8)	; clear syscall flag
-	.endm
-
-	.macro RESTORE_ALL __rp __tsr
-	LDDW	.D2T2	*++SP[1],B9:B8		; get TSR (B9)
-	LDDW	.D2T2	*++SP[1],B11:B10	; get RILC (B11) and ILC (B10)
-	LDDW	.D2T2	*++SP[1],B13:B12	; get PC (B13) and CSR (B12)
-
-	ADDAW	.D1X	SP,30,A15
-
-	LDDW	.D1T1	*++A15[1],A17:A16
- ||	LDDW	.D2T2	*++SP[1],B17:B16
-	LDDW	.D1T1	*++A15[1],A19:A18
- ||	LDDW	.D2T2	*++SP[1],B19:B18
-	LDDW	.D1T1	*++A15[1],A21:A20
- ||	LDDW	.D2T2	*++SP[1],B21:B20
-	LDDW	.D1T1	*++A15[1],A23:A22
- ||	LDDW	.D2T2	*++SP[1],B23:B22
-	LDDW	.D1T1	*++A15[1],A25:A24
- ||	LDDW	.D2T2	*++SP[1],B25:B24
-	LDDW	.D1T1	*++A15[1],A27:A26
- ||	LDDW	.D2T2	*++SP[1],B27:B26
-	LDDW	.D1T1	*++A15[1],A29:A28
- ||	LDDW	.D2T2	*++SP[1],B29:B28
-	LDDW	.D1T1	*++A15[1],A31:A30
- ||	LDDW	.D2T2	*++SP[1],B31:B30
-
-	LDDW	.D1T1	*++A15[1],A1:A0
- ||	LDDW	.D2T2	*++SP[1],B1:B0
-
-	LDDW	.D1T1	*++A15[1],A3:A2
- ||	LDDW	.D2T2	*++SP[1],B3:B2
- ||	MVC	.S2	B9,__tsr
-	LDDW	.D1T1	*++A15[1],A5:A4
- ||	LDDW	.D2T2	*++SP[1],B5:B4
- ||	MVC	.S2	B11,RILC
-	LDDW	.D1T1	*++A15[1],A7:A6
- ||	LDDW	.D2T2	*++SP[1],B7:B6
- ||	MVC	.S2	B10,ILC
-
-	LDDW	.D1T1	*++A15[1],A9:A8
- ||	LDDW	.D2T2	*++SP[1],B9:B8
- ||	MVC	.S2	B13,__rp
-
-	LDDW	.D1T1	*++A15[1],A11:A10
- ||	LDDW	.D2T2	*++SP[1],B11:B10
- ||	MVC	.S2	B12,CSR
-
-	LDDW	.D1T1	*++A15[1],A13:A12
- ||	LDDW	.D2T2	*++SP[1],B13:B12
-
-	MV	.D2X	A15,SP
- ||	MVKL	.S1	current_ksp,A15
-	MVKH	.S1	current_ksp,A15
- ||	ADDAW	.D1X	SP,6,A14
-	STW	.D1T1	A14,*A15	; save kernel stack pointer
-
-	LDDW	.D2T1	*++SP[1],A15:A14
-
-	B	.S2	__rp		; return from interruption
-	LDDW	.D2T2	*+SP[1],SP:DP
-	NOP	4
-	.endm
-
-	.section .text
-
-	;;
-	;; Jump to schedule() then return to ret_from_exception
-	;;
-_reschedule:
-#ifdef CONFIG_C6X_BIG_KERNEL
-	MVKL	.S1	schedule,A0
-	MVKH	.S1	schedule,A0
-	B	.S2X	A0
-#else
-	B	.S1	schedule
-#endif
-	ADDKPC	.S2	ret_from_exception,B3,4
-
-	;;
-	;; Called before syscall handler when process is being debugged
-	;;
-tracesys_on:
-#ifdef CONFIG_C6X_BIG_KERNEL
-	MVKL	.S1	syscall_trace_entry,A0
-	MVKH	.S1	syscall_trace_entry,A0
-	B	.S2X	A0
-#else
-	B	.S1	syscall_trace_entry
-#endif
-	ADDKPC	.S2	ret_from_syscall_trace,B3,3
-	ADD	.S1X	8,SP,A4
-
-ret_from_syscall_trace:
-	;; tracing returns (possibly new) syscall number
-	MV	.D2X	A4,B0
- ||	MVK	.S2	__NR_syscalls,B1
-	CMPLTU	.L2	B0,B1,B1
-
- [!B1]	BNOP	.S2	ret_from_syscall_function,5
- ||	MVK	.S1	-ENOSYS,A4
-
-	;; reload syscall args from (possibly modified) stack frame
-	;; and get syscall handler addr from sys_call_table:
-	LDW	.D2T2	*+SP(REGS_B4+8),B4
- ||	MVKL	.S2	sys_call_table,B1
-	LDW	.D2T1	*+SP(REGS_A6+8),A6
- ||	MVKH	.S2	sys_call_table,B1
-	LDW	.D2T2	*+B1[B0],B0
- ||	MVKL	.S2	ret_from_syscall_function,B3
-	LDW	.D2T2	*+SP(REGS_B6+8),B6
- ||	MVKH	.S2	ret_from_syscall_function,B3
-	LDW	.D2T1	*+SP(REGS_A8+8),A8
-	LDW	.D2T2	*+SP(REGS_B8+8),B8
-	NOP
-	; B0 = sys_call_table[__NR_*]
-	BNOP	.S2	B0,5			; branch to syscall handler
- ||	LDW	.D2T1	*+SP(REGS_ORIG_A4+8),A4
-
-syscall_exit_work:
-	AND	.D1	_TIF_SYSCALL_TRACE,A2,A0
- [!A0]	BNOP	.S1	work_pending,5
- [A0]	B	.S2	syscall_trace_exit
-	ADDKPC	.S2	resume_userspace,B3,1
-	MVC	.S2	CSR,B1
-	SET	.S2	B1,0,0,B1
-	MVC	.S2	B1,CSR		; enable ints
-
-work_pending:
-	AND	.D1	_TIF_NEED_RESCHED,A2,A0
- [!A0]	BNOP	.S1	work_notifysig,5
-
-work_resched:
-#ifdef CONFIG_C6X_BIG_KERNEL
-	MVKL	.S1	schedule,A1
-	MVKH	.S1	schedule,A1
-	B	.S2X	A1
-#else
-	B	.S2	schedule
-#endif
-	ADDKPC	.S2	work_rescheduled,B3,4
-work_rescheduled:
-	;; make sure we don't miss an interrupt setting need_resched or
-	;; sigpending between sampling and the rti
-	MASK_INT B2
-	GET_THREAD_INFO A12
-	LDW	.D1T1	*+A12(THREAD_INFO_FLAGS),A2
-	MVK	.S1	_TIF_WORK_MASK,A1
-	MVK	.S1	_TIF_NEED_RESCHED,A3
-	NOP	2
-	AND	.D1	A1,A2,A0
- ||	AND	.S1	A3,A2,A1
- [!A0]	BNOP	.S1	restore_all,5
- [A1]	BNOP	.S1	work_resched,5
-
-work_notifysig:
-	;; enable interrupts for do_notify_resume()
-	UNMASK_INT B2
-	B	.S2	do_notify_resume
-	LDW	.D2T1	*+SP(REGS__END+8),A6 ; syscall flag
-	ADDKPC	.S2	resume_userspace,B3,1
-	ADD	.S1X	8,SP,A4		; pt_regs pointer is first arg
-	MV	.D2X	A2,B4		; thread_info flags is second arg
-
-	;;
-	;; On C64x+, the return way from exception and interrupt
-	;; is a little bit different
-	;;
-ENTRY(ret_from_exception)
-#ifdef CONFIG_PREEMPTION
-	MASK_INT B2
-#endif
-
-ENTRY(ret_from_interrupt)
-	;;
-	;; Check if we are comming from user mode.
-	;;
-	LDW	.D2T2	*+SP(REGS_TSR+8),B0
-	MVK	.S2	0x40,B1
-	NOP	3
-	AND	.D2	B0,B1,B0
- [!B0]	BNOP	.S2	resume_kernel,5
-
-resume_userspace:
-	;; make sure we don't miss an interrupt setting need_resched or
-	;; sigpending between sampling and the rti
-	MASK_INT B2
-	GET_THREAD_INFO A12
-	LDW	.D1T1	*+A12(THREAD_INFO_FLAGS),A2
-	MVK	.S1	_TIF_WORK_MASK,A1
-	MVK	.S1	_TIF_NEED_RESCHED,A3
-	NOP	2
-	AND	.D1	A1,A2,A0
- [A0]	BNOP	.S1	work_pending,5
-	BNOP	.S1	restore_all,5
-
-	;;
-	;; System call handling
-	;; B0 = syscall number (in sys_call_table)
-	;; A4,B4,A6,B6,A8,B8 = arguments of the syscall function
-	;; A4 is the return value register
-	;;
-system_call_saved:
-	MVK	.L2	1,B2
-	STW	.D2T2	B2,*+SP(REGS__END+8)	; set syscall flag
-	MVC	.S2	B2,ECR			; ack the software exception
-
-	UNMASK_INT B2			; re-enable global IT
-
-system_call_saved_noack:
-	;; Check system call number
-	MVK	.S2	__NR_syscalls,B1
-#ifdef CONFIG_C6X_BIG_KERNEL
- ||	MVKL	.S1	sys_ni_syscall,A0
-#endif
-	CMPLTU	.L2	B0,B1,B1
-#ifdef CONFIG_C6X_BIG_KERNEL
- ||	MVKH	.S1	sys_ni_syscall,A0
-#endif
-
-	;; Check for ptrace
-	GET_THREAD_INFO A12
-
-#ifdef CONFIG_C6X_BIG_KERNEL
- [!B1]	B	.S2X	A0
-#else
- [!B1]	B	.S2	sys_ni_syscall
-#endif
- [!B1]	ADDKPC	.S2	ret_from_syscall_function,B3,4
-
-	;; Get syscall handler addr from sys_call_table
-	;; call tracesys_on or call syscall handler
-	LDW	.D1T1	*+A12(THREAD_INFO_FLAGS),A2
- ||	MVKL	.S2	sys_call_table,B1
-	MVKH	.S2	sys_call_table,B1
-	LDW	.D2T2	*+B1[B0],B0
-	NOP	2
-	; A2 = thread_info flags
-	AND	.D1	_TIF_SYSCALL_TRACE,A2,A2
- [A2]	BNOP	.S1	tracesys_on,5
-	;; B0 = _sys_call_table[__NR_*]
-	B	.S2	B0
-	ADDKPC	.S2	ret_from_syscall_function,B3,4
-
-ret_from_syscall_function:
-	STW	.D2T1	A4,*+SP(REGS_A4+8)	; save return value in A4
-						; original A4 is in orig_A4
-syscall_exit:
-	;; make sure we don't miss an interrupt setting need_resched or
-	;; sigpending between sampling and the rti
-	MASK_INT B2
-	LDW	.D1T1	*+A12(THREAD_INFO_FLAGS),A2
-	MVK	.S1	_TIF_ALLWORK_MASK,A1
-	NOP	3
-	AND	.D1	A1,A2,A2 ; check for work to do
- [A2]	BNOP	.S1	syscall_exit_work,5
-
-restore_all:
-	RESTORE_ALL NRP,NTSR
-
-	;;
-	;; After a fork we jump here directly from resume,
-	;; so that A4 contains the previous task structure.
-	;;
-ENTRY(ret_from_fork)
-#ifdef CONFIG_C6X_BIG_KERNEL
-	MVKL	.S1	schedule_tail,A0
-	MVKH	.S1	schedule_tail,A0
-	B	.S2X	A0
-#else
-	B	.S2	schedule_tail
-#endif
-	ADDKPC	.S2	ret_from_fork_2,B3,4
-ret_from_fork_2:
-	;; return 0 in A4 for child process
-	GET_THREAD_INFO A12
-	BNOP	.S2	syscall_exit,3
-	MVK	.L2	0,B0
-	STW	.D2T2	B0,*+SP(REGS_A4+8)
-ENDPROC(ret_from_fork)
-
-ENTRY(ret_from_kernel_thread)
-#ifdef CONFIG_C6X_BIG_KERNEL
-	MVKL	.S1	schedule_tail,A0
-	MVKH	.S1	schedule_tail,A0
-	B	.S2X	A0
-#else
-	B	.S2	schedule_tail
-#endif
-	LDW	.D2T2	*+SP(REGS_A0+8),B10 /* get fn  */
-	ADDKPC	.S2	0f,B3,3
-0:
-	B	.S2	B10		   /* call fn */
-	LDW	.D2T1	*+SP(REGS_A1+8),A4 /* get arg */
-	ADDKPC	.S2	ret_from_fork_2,B3,3
-ENDPROC(ret_from_kernel_thread)
-
-	;;
-	;; These are the interrupt handlers, responsible for calling c6x_do_IRQ()
-	;;
-	.macro SAVE_ALL_INT
-	SAVE_ALL IRP,ITSR
-	.endm
-
-	.macro CALL_INT int
-#ifdef CONFIG_C6X_BIG_KERNEL
-	MVKL	.S1	c6x_do_IRQ,A0
-	MVKH	.S1	c6x_do_IRQ,A0
-	BNOP	.S2X	A0,1
-	MVK	.S1	int,A4
-	ADDAW	.D2	SP,2,B4
-	MVKL	.S2	ret_from_interrupt,B3
-	MVKH	.S2	ret_from_interrupt,B3
-#else
-	CALLP   .S2	c6x_do_IRQ,B3
- ||	MVK	.S1	int,A4
- ||	ADDAW	.D2	SP,2,B4
-	B	.S1	ret_from_interrupt
-	NOP	5
-#endif
-	.endm
-
-ENTRY(_int4_handler)
-	SAVE_ALL_INT
-	CALL_INT 4
-ENDPROC(_int4_handler)
-
-ENTRY(_int5_handler)
-	SAVE_ALL_INT
-	CALL_INT 5
-ENDPROC(_int5_handler)
-
-ENTRY(_int6_handler)
-	SAVE_ALL_INT
-	CALL_INT 6
-ENDPROC(_int6_handler)
-
-ENTRY(_int7_handler)
-	SAVE_ALL_INT
-	CALL_INT 7
-ENDPROC(_int7_handler)
-
-ENTRY(_int8_handler)
-	SAVE_ALL_INT
-	CALL_INT 8
-ENDPROC(_int8_handler)
-
-ENTRY(_int9_handler)
-	SAVE_ALL_INT
-	CALL_INT 9
-ENDPROC(_int9_handler)
-
-ENTRY(_int10_handler)
-	SAVE_ALL_INT
-	CALL_INT 10
-ENDPROC(_int10_handler)
-
-ENTRY(_int11_handler)
-	SAVE_ALL_INT
-	CALL_INT 11
-ENDPROC(_int11_handler)
-
-ENTRY(_int12_handler)
-	SAVE_ALL_INT
-	CALL_INT 12
-ENDPROC(_int12_handler)
-
-ENTRY(_int13_handler)
-	SAVE_ALL_INT
-	CALL_INT 13
-ENDPROC(_int13_handler)
-
-ENTRY(_int14_handler)
-	SAVE_ALL_INT
-	CALL_INT 14
-ENDPROC(_int14_handler)
-
-ENTRY(_int15_handler)
-	SAVE_ALL_INT
-	CALL_INT 15
-ENDPROC(_int15_handler)
-
-	;;
-	;; Handler for uninitialized and spurious interrupts
-	;;
-ENTRY(_bad_interrupt)
-	B	.S2	IRP
-	NOP	5
-ENDPROC(_bad_interrupt)
-
-	;;
-	;; Entry for NMI/exceptions/syscall
-	;;
-ENTRY(_nmi_handler)
-	SAVE_ALL NRP,NTSR
-
-	MVC	.S2	EFR,B2
-	CMPEQ	.L2	1,B2,B2
- ||	MVC	.S2	TSR,B1
-	CLR	.S2	B1,10,10,B1
-	MVC	.S2	B1,TSR
-#ifdef CONFIG_C6X_BIG_KERNEL
- [!B2]	MVKL	.S1	process_exception,A0
- [!B2]	MVKH	.S1	process_exception,A0
- [!B2]	B	.S2X	A0
-#else
- [!B2]	B	.S2	process_exception
-#endif
- [B2]	B	.S2	system_call_saved
- [!B2]	ADDAW	.D2	SP,2,B1
- [!B2]	MV	.D1X	B1,A4
-	ADDKPC	.S2	ret_from_trap,B3,2
-
-ret_from_trap:
-	MV	.D2X	A4,B0
- [!B0]	BNOP	.S2	ret_from_exception,5
-
-#ifdef CONFIG_C6X_BIG_KERNEL
-	MVKL	.S2	system_call_saved_noack,B3
-	MVKH	.S2	system_call_saved_noack,B3
-#endif
-	LDW	.D2T2	*+SP(REGS_B0+8),B0
-	LDW	.D2T1	*+SP(REGS_A4+8),A4
-	LDW	.D2T2	*+SP(REGS_B4+8),B4
-	LDW	.D2T1	*+SP(REGS_A6+8),A6
-	LDW	.D2T2	*+SP(REGS_B6+8),B6
-	LDW	.D2T1	*+SP(REGS_A8+8),A8
-#ifdef CONFIG_C6X_BIG_KERNEL
- ||	B	.S2	B3
-#else
- ||	B	.S2	system_call_saved_noack
-#endif
-	LDW	.D2T2	*+SP(REGS_B8+8),B8
-	NOP	4
-ENDPROC(_nmi_handler)
-
-	;;
-	;; Jump to schedule() then return to ret_from_isr
-	;;
-#ifdef	CONFIG_PREEMPTION
-resume_kernel:
-	GET_THREAD_INFO A12
-	LDW	.D1T1	*+A12(THREAD_INFO_PREEMPT_COUNT),A1
-	NOP	4
- [A1]	BNOP	.S2	restore_all,5
-
-preempt_schedule:
-	GET_THREAD_INFO A2
-	LDW	.D1T1	*+A2(THREAD_INFO_FLAGS),A1
-#ifdef CONFIG_C6X_BIG_KERNEL
-	MVKL	.S2	preempt_schedule_irq,B0
-	MVKH	.S2	preempt_schedule_irq,B0
-	NOP	2
-#else
-	NOP	4
-#endif
-	AND	.D1	_TIF_NEED_RESCHED,A1,A1
- [!A1]	BNOP	.S2	restore_all,5
-#ifdef CONFIG_C6X_BIG_KERNEL
-	B	.S2	B0
-#else
-	B	.S2	preempt_schedule_irq
-#endif
-	ADDKPC	.S2	preempt_schedule,B3,4
-#endif /* CONFIG_PREEMPTION */
-
-ENTRY(enable_exception)
-	DINT
-	MVC	.S2	TSR,B0
-	MVC	.S2	B3,NRP
-	MVK	.L2	0xc,B1
-	OR	.D2	B0,B1,B0
-	MVC	.S2	B0,TSR			;  Set GEE and XEN in TSR
-	B	.S2	NRP
-	NOP	5
-ENDPROC(enable_exception)
-
-	;;
-	;; Special system calls
-	;; return address is in B3
-	;;
-ENTRY(sys_rt_sigreturn)
-	ADD	.D1X	SP,8,A4
-#ifdef CONFIG_C6X_BIG_KERNEL
- ||	MVKL	.S1	do_rt_sigreturn,A0
-	MVKH	.S1	do_rt_sigreturn,A0
-	BNOP	.S2X	A0,5
-#else
- ||	B	.S2	do_rt_sigreturn
-	NOP	5
-#endif
-ENDPROC(sys_rt_sigreturn)
-
-ENTRY(sys_pread_c6x)
-	MV	.D2X	A8,B7
-#ifdef CONFIG_C6X_BIG_KERNEL
- ||	MVKL	.S1	sys_pread64,A0
-	MVKH	.S1	sys_pread64,A0
-	BNOP	.S2X	A0,5
-#else
- ||	B	.S2	sys_pread64
-	NOP	5
-#endif
-ENDPROC(sys_pread_c6x)
-
-ENTRY(sys_pwrite_c6x)
-	MV	.D2X	A8,B7
-#ifdef CONFIG_C6X_BIG_KERNEL
- ||	MVKL	.S1	sys_pwrite64,A0
-	MVKH	.S1	sys_pwrite64,A0
-	BNOP	.S2X	A0,5
-#else
- ||	B	.S2	sys_pwrite64
-	NOP	5
-#endif
-ENDPROC(sys_pwrite_c6x)
-
-;; On Entry
-;;   A4 - path
-;;   B4 - offset_lo (LE), offset_hi (BE)
-;;   A6 - offset_lo (BE), offset_hi (LE)
-ENTRY(sys_truncate64_c6x)
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	MV	.S2	B4,B5
-	MV	.D2X	A6,B4
-#else
-	MV	.D2X	A6,B5
-#endif
-#ifdef CONFIG_C6X_BIG_KERNEL
- ||	MVKL	.S1	sys_truncate64,A0
-	MVKH	.S1	sys_truncate64,A0
-	BNOP	.S2X	A0,5
-#else
- ||	B	.S2	sys_truncate64
-	NOP	5
-#endif
-ENDPROC(sys_truncate64_c6x)
-
-;; On Entry
-;;   A4 - fd
-;;   B4 - offset_lo (LE), offset_hi (BE)
-;;   A6 - offset_lo (BE), offset_hi (LE)
-ENTRY(sys_ftruncate64_c6x)
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	MV	.S2	B4,B5
-	MV	.D2X	A6,B4
-#else
-	MV	.D2X	A6,B5
-#endif
-#ifdef CONFIG_C6X_BIG_KERNEL
- ||	MVKL	.S1	sys_ftruncate64,A0
-	MVKH	.S1	sys_ftruncate64,A0
-	BNOP	.S2X	A0,5
-#else
- ||	B	.S2	sys_ftruncate64
-	NOP	5
-#endif
-ENDPROC(sys_ftruncate64_c6x)
-
-;; On Entry
-;;   A4 - fd
-;;   B4 - offset_lo (LE), offset_hi (BE)
-;;   A6 - offset_lo (BE), offset_hi (LE)
-;;   B6 - len_lo (LE), len_hi (BE)
-;;   A8 - len_lo (BE), len_hi (LE)
-;;   B8 - advice
-ENTRY(sys_fadvise64_64_c6x)
-#ifdef CONFIG_C6X_BIG_KERNEL
-	MVKL	.S1	sys_fadvise64_64,A0
-	MVKH	.S1	sys_fadvise64_64,A0
-	BNOP	.S2X	A0,2
-#else
-	B	.S2	sys_fadvise64_64
-	NOP	2
-#endif
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	MV	.L2	B4,B5
- ||	MV	.D2X	A6,B4
-	MV	.L1	A8,A6
- ||	MV	.D1X	B6,A7
-#else
-	MV	.D2X	A6,B5
-	MV	.L1	A8,A7
- ||	MV	.D1X	B6,A6
-#endif
-	MV	.L2	B8,B6
-ENDPROC(sys_fadvise64_64_c6x)
-
-;; On Entry
-;;   A4 - fd
-;;   B4 - mode
-;;   A6 - offset_hi
-;;   B6 - offset_lo
-;;   A8 - len_hi
-;;   B8 - len_lo
-ENTRY(sys_fallocate_c6x)
-#ifdef CONFIG_C6X_BIG_KERNEL
-	MVKL	.S1	sys_fallocate,A0
-	MVKH	.S1	sys_fallocate,A0
-	BNOP	.S2X	A0,1
-#else
-	B	.S2	sys_fallocate
-	NOP
-#endif
-	MV	.D1	A6,A7
-	MV	.D1X	B6,A6
-	MV	.D2X	A8,B7
-	MV	.D2	B8,B6
-ENDPROC(sys_fallocate_c6x)
-
-	;; put this in .neardata for faster access when using DSBT mode
-	.section .neardata,"aw",@progbits
-	.global	current_ksp
-	.hidden	current_ksp
-current_ksp:
-	.word	init_thread_union + THREAD_START_SP