diff options
author | Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> | 2014-01-16 09:10:31 +0100 |
---|---|---|
committer | Jason Cooper <jason@lakedaemon.net> | 2014-01-16 16:31:26 +0000 |
commit | f28d7de6bd4d41774744e011141945affa127da4 (patch) | |
tree | 6608781b5d4058e4de70eb9cce4e4d5ed8578034 /arch/arm | |
parent | f8b94beb7e6a374cb0de531b72377c49857b35ca (diff) | |
download | linux-f28d7de6bd4d41774744e011141945affa127da4.tar.bz2 |
ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER
DT-enabled Marvell Kirkwood and Dove SoCs make use of an irqchip
driver. As expected for irqchip drivers, it uses a C-style
interrupt handler and therefore selects MULTI_IRQ_HANDLER.
Now, compiling a kernel with both non-DT and DT support enabled,
selecting MULTI_IRQ_HANDLER will break ASM irq handler used by
non-DT boards.
Therefore, we provide a C-style irq handler even for non-DT boards,
if MULTI_IRQ_HANDLER is set. By installing the C-style irq handler
in orion_irq_init this is transparent to all non-DT board files.
While the regression report was filed on Marvell Kirkwood, also
Marvell Dove non-DT boards are affected and fixed by this patch.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Reported-by: Ian Campbell <ijc@hellion.org.uk>
Cc: <stable@vger.kernel.org> # v3.12+
Fixes: 2326f04321a9 ("ARM: kirkwood: convert to DT irqchip and clocksource")
Fixes: f07d73e33d0e ("ARM: dove: convert to DT irqchip and clocksource")
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/plat-orion/irq.c | 47 |
1 files changed, 47 insertions, 0 deletions
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index c492e1b3dfdb..807df142444b 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -15,8 +15,51 @@ #include <linux/io.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <asm/exception.h> #include <plat/irq.h> #include <plat/orion-gpio.h> +#include <mach/bridge-regs.h> + +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + * + * Notes: + * - this is prepared for Kirkwood and Dove only, update + * accordingly if you add Orion5x or MV78x00. + * - Orion5x uses different macro names and has only one + * set of CAUSE/MASK registers. + * - MV78x00 uses the same macro names but has a third + * set of CAUSE/MASK registers. + * + */ + +static void __iomem *orion_irq_base = IRQ_VIRT_BASE; + +asmlinkage void +__exception_irq_entry orion_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_LOW_OFF); + stat &= readl_relaxed(orion_irq_base + IRQ_MASK_LOW_OFF); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } + stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_HIGH_OFF); + stat &= readl_relaxed(orion_irq_base + IRQ_MASK_HIGH_OFF); + if (stat) { + unsigned int hwirq = 32 + __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) { @@ -35,6 +78,10 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) ct->chip.irq_unmask = irq_gc_mask_set_bit; irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); + +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(orion_legacy_handle_irq); +#endif } #ifdef CONFIG_OF |