diff options
| author | Kevin Hilman <khilman@linaro.org> | 2015-06-24 21:32:15 -0700 |
|---|---|---|
| committer | Kevin Hilman <khilman@linaro.org> | 2015-06-24 21:32:15 -0700 |
| commit | 39e79b873e1bafc5637a1a704495b01edbe469b1 (patch) | |
| tree | adc6a52bbb4d15eca8cdff567d3a44db6ce24c0c /arch/arm | |
| parent | 03fa626774a30145bdb97ce1bc909a0cfd419ce6 (diff) | |
| parent | 58c179674329b4d03a9d22df55d95cb0a8da5d85 (diff) | |
| download | linux-39e79b873e1bafc5637a1a704495b01edbe469b1.tar.bz2 | |
Merge tag 'armsoc-dt' into test-merge
ARM: SoC: DT updates for v4.2
As usual, quite a few device-tree updates in ARM land. There was ome
minor churn in DTs due to relicensing under a dual-license, and lots
of little additions of new peripherals, features etc, but nothing
really exciting to call to your attention. Some higlights, focsuing
on support for new SoCs and boards:
- AT91: new boards: Overkiz, Acme Systems' Arietta G25
- tegra: HDA support
- bcm: new platforms: Buffalo WXR-1900DHP, SmartRG SR400ac, ASUS RT-AC87U
- mvebu: new platforms: Compulab CM-A510, Armada 385-based Linksys
boards, DLink DNS-327L
- OMAP: new platforms: Baltos IR5221, LogicPD Torpedo, Toby-Churchill SL50
- ARM: added support for Juno r1 board
- sunxi: A33 SoC support; new boards: A23 EVB, SinA33, GA10H-A33, Mele A1000G
- imx: i.MX7D SoC support; new boards: Armadeus Systems APF6,
Gateworks GW5510, and aristainetos2 boards
- hisilicon: hi6220 SoC support; new boards: 96boards hikey
Conflicts: None
# gpg: Signature made Wed Jun 24 21:32:14 2015 PDT using RSA key ID D3FBC665
# gpg: Good signature from "Kevin Hilman <khilman@deeprootsystems.com>"
# gpg: aka "Kevin Hilman <khilman@linaro.org>"
# gpg: aka "Kevin Hilman <khilman@kernel.org>"
Diffstat (limited to 'arch/arm')
356 files changed, 27991 insertions, 9005 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c52002c802f8..246473a244f6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -20,9 +20,9 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ tny_a9263.dtb \ usb_a9263.dtb \ at91-foxg20.dtb \ + at91-kizbox.dtb \ at91sam9g20ek.dtb \ at91sam9g20ek_2mmc.dtb \ - kizbox.dtb \ tny_a9g20.dtb \ usb_a9g20.dtb \ usb_a9g20_lpw.dtb \ @@ -31,13 +31,16 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ at91sam9n12ek.dtb \ at91sam9rlek.dtb \ at91-ariag25.dtb \ + at91-ariettag25.dtb \ at91-cosino_mega2560.dtb \ + at91-kizboxmini.dtb \ at91sam9g15ek.dtb \ at91sam9g25ek.dtb \ at91sam9g35ek.dtb \ at91sam9x25ek.dtb \ at91sam9x35ek.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ + at91-kizbox2.dtb \ at91-sama5d3_xplained.dtb \ sama5d31ek.dtb \ sama5d33ek.dtb \ @@ -56,13 +59,18 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b.dtb \ bcm2835-rpi-b-plus.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4708-asus-rt-ac56u.dtb \ + bcm4708-asus-rt-ac68u.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ bcm4708-luxul-xwc-1000.dtb \ bcm4708-netgear-r6250.dtb \ bcm4708-netgear-r6300-v2.dtb \ + bcm4708-smartrg-sr400ac.dtb \ bcm47081-asus-rt-n18u.dtb \ bcm47081-buffalo-wzr-600dhp2.dtb \ bcm47081-buffalo-wzr-900dhp.dtb \ + bcm4709-asus-rt-ac87u.dtb \ + bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-netgear-r8000.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ bcm963138dvt.dtb @@ -113,6 +121,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ exynos5422-odroidxu3.dtb \ + exynos5422-odroidxu3-lite.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb @@ -201,6 +210,9 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-ts219-6282.dtb \ kirkwood-ts419-6281.dtb \ kirkwood-ts419-6282.dtb +dtb-$(CONFIG_ARCH_LPC18XX) += \ + lpc4350-hitex-eval.dtb \ + lpc4357-ea4357-devkit.dtb dtb-$(CONFIG_ARCH_LPC32XX) += \ ea3250.dtb phy3250.dtb dtb-$(CONFIG_MACH_MESON6) += \ @@ -254,14 +266,18 @@ dtb-$(CONFIG_SOC_IMX53) += \ imx53-tx53-x13x.dtb \ imx53-voipac-bsb.dtb dtb-$(CONFIG_SOC_IMX6Q) += \ + imx6dl-apf6dev.dtb \ imx6dl-aristainetos_4.dtb \ imx6dl-aristainetos_7.dtb \ + imx6dl-aristainetos2_4.dtb \ + imx6dl-aristainetos2_7.dtb \ imx6dl-cubox-i.dtb \ imx6dl-dfi-fs700-m60.dtb \ imx6dl-gw51xx.dtb \ imx6dl-gw52xx.dtb \ imx6dl-gw53xx.dtb \ imx6dl-gw54xx.dtb \ + imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ imx6dl-nitrogen6x.dtb \ @@ -277,6 +293,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-udoo.dtb \ imx6dl-wandboard.dtb \ imx6dl-wandboard-revb1.dtb \ + imx6q-apf6dev.dtb \ imx6q-arm2.dtb \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ @@ -288,6 +305,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw53xx.dtb \ imx6q-gw5400-a.dtb \ imx6q-gw54xx.dtb \ + imx6q-gw551x.dtb \ imx6q-gw552x.dtb \ imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ @@ -313,12 +331,15 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sabreauto.dtb \ imx6sx-sdb-reva.dtb \ imx6sx-sdb.dtb +dtb-$(CONFIG_SOC_IMX7D) += \ + imx7d-sdb.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-qds.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ vf610-colibri-eval-v3.dtb \ + vf610m4-colibri.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += \ @@ -360,6 +381,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ am3517-craneboard.dtb \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ + logicpd-torpedo-37xx-devkit.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ omap3-beagle-xm.dtb \ @@ -406,9 +428,11 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ dtb-$(CONFIG_SOC_TI81XX) += \ dm8168-evm.dtb dtb-$(CONFIG_SOC_AM33XX) += \ + am335x-baltos-ir5221.dtb \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-sl50.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ am335x-nano.dtb \ @@ -496,7 +520,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ - socfpga_arria10_socdk.dtb \ + socfpga_arria10_socdk_sdmmc.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ @@ -520,32 +544,39 @@ dtb-$(CONFIG_ARCH_STI) += \ stih416-b2020.dtb \ stih416-b2020e.dtb \ stih418-b2199.dtb +dtb-$(CONFIG_ARCH_STM32)+= stm32f429-disco.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ sun4i-a10-chuwi-v7-cw0825.dtb \ sun4i-a10-cubieboard.dtb \ + sun4i-a10-gemei-g9.dtb \ + sun4i-a10-hackberry.dtb \ + sun4i-a10-hyundai-a7hd.dtb \ + sun4i-a10-inet97fv2.dtb \ + sun4i-a10-jesurun-q5.dtb \ sun4i-a10-marsboard.dtb \ sun4i-a10-mini-xplus.dtb \ sun4i-a10-mk802.dtb \ sun4i-a10-mk802ii.dtb \ - sun4i-a10-hackberry.dtb \ - sun4i-a10-hyundai-a7hd.dtb \ - sun4i-a10-inet97fv2.dtb \ sun4i-a10-olinuxino-lime.dtb \ sun4i-a10-pcduino.dtb dtb-$(CONFIG_MACH_SUN5I) += \ + sun5i-a10s-auxtek-t004.dtb \ sun5i-a10s-mk802.dtb \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ sun5i-a13-hsg-h702.dtb \ sun5i-a13-olinuxino.dtb \ - sun5i-a13-olinuxino-micro.dtb + sun5i-a13-olinuxino-micro.dtb \ + sun5i-a13-utoo-p66.dtb dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ sun6i-a31-hummingbird.dtb \ + sun6i-a31-i7.dtb \ sun6i-a31-m9.dtb \ + sun6i-a31-mele-a1000g-quad.dtb \ sun6i-a31s-cs908.dtb dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapi.dtb \ @@ -555,15 +586,25 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-m3.dtb \ + sun7i-a20-mk808c.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ - sun7i-a20-pcduino3.dtb + sun7i-a20-orangepi.dtb \ + sun7i-a20-orangepi-mini.dtb \ + sun7i-a20-pcduino3.dtb \ + sun7i-a20-pcduino3-nano.dtb \ + sun7i-a20-wexler-tab7200.dtb dtb-$(CONFIG_MACH_SUN8I) += \ + sun8i-a23-evb.dtb \ sun8i-a23-ippo-q8h-v5.dtb \ - sun8i-a23-ippo-q8h-v1.2.dtb + sun8i-a23-ippo-q8h-v1.2.dtb \ + sun8i-a33-et-q8-v1.6.dtb \ + sun8i-a33-ga10h-v1.1.dtb \ + sun8i-a33-sinlinx-sina33.dtb dtb-$(CONFIG_MACH_SUN9I) += \ - sun9i-a80-optimus.dtb + sun9i-a80-optimus.dtb \ + sun9i-a80-cubieboard4.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-harmony.dtb \ tegra20-iris-512.dtb \ @@ -600,6 +641,11 @@ dtb-$(CONFIG_ARCH_U8500) += \ ste-hrefv60plus-tvk.dtb \ ste-ccu8540.dtb \ ste-ccu9540.dtb +dtb-$(CONFIG_ARCH_UNIPHIER) += \ + uniphier-ph1-sld3-ref.dtb \ + uniphier-ph1-ld4-ref.dtb \ + uniphier-ph1-pro4-ref.dtb \ + uniphier-ph1-sld8-ref.dtb dtb-$(CONFIG_ARCH_VERSATILE) += \ versatile-ab.dtb \ versatile-pb.dtb @@ -624,6 +670,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zybo.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-db.dtb \ + armada-370-dlink-dns327l.dtb \ armada-370-mirabox.dtb \ armada-370-netgear-rn102.dtb \ armada-370-netgear-rn104.dtb \ @@ -633,6 +680,8 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-385-db-ap.dtb \ + armada-385-linksys-caiman.dtb \ + armada-385-linksys-cobra.dtb \ armada-388-db.dtb \ armada-388-gp.dtb \ armada-388-rd.dtb @@ -649,12 +698,12 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-openblocks-ax3-4.dtb \ armada-xp-synology-ds414.dtb dtb-$(CONFIG_MACH_DOVE) += \ - dove-cm-a510.dtb \ dove-cubox.dtb \ dove-cubox-es.dtb \ dove-d2plug.dtb \ dove-d3plug.dtb \ - dove-dove-db.dtb + dove-dove-db.dtb \ + dove-sbc-a510.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt6589-aquaris5.dtb \ mt6592-evb.dtb \ diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts new file mode 100644 index 000000000000..7d36601697da --- /dev/null +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -0,0 +1,532 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am33xx.dtsi" +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "OnRISC Baltos iR 5221"; + compatible = "vscom,onrisc", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + wl12xx_vmmc: fixedregulator@2 { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 8 0>; + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&am33xx_pinmux { + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x020 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */ + 0x024 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */ + 0x028 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */ + 0x02c (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */ + 0x080 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */ + 0x084 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */ + 0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */ + >; + }; + + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + 0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ + >; + }; + + tps65910_pins: pinmux_tps65910_pins { + pinctrl-single,pins = < + 0x078 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */ + >; + }; + + tca6416_pins: pinmux_tca6416_pins { + pinctrl-single,pins = < + 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x158 0x2a /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */ + 0x15c 0x2a /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */ + >; + }; + + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + 0x168 0x0a /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */ + 0x16c 0x2a /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x180 0x28 /* uart1_rxd, INPUT | MODE0 */ + 0x184 0x28 /* uart1_txd, INPUT | MODE0 */ + /*0x178 0x28*/ /* uart1_ctsn, INPUT | MODE0 */ + /*0x17c 0x08*/ /* uart1_rtsn, OUTPUT | MODE0 */ + 0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */ + 0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */ + 0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ + 0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ + 0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ + 0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x150 0x29 /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */ + 0x154 0x09 /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */ + /*0x188 0x2a*/ /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */ + /*0x18c 0x2a*/ /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */ + 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */ + 0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */ + 0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ + 0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ + 0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ + 0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */ + + 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */ + + + /* Slave 2 */ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + /* Slave 2 reset value*/ + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + nandflash_pins_s0: nandflash_pins_s0 { + pinctrl-single,pins = < + 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins_s0>; + ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + status = "okay"; + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <8>; + ti,nand-ecc-opt = "bch8"; + ti,nand-xfer-type = "polled"; + + gpmc,device-nand = "true"; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + elm_id = <&elm>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <28 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tps65910_pins>; + }; + + at24@50 { + compatible = "at24,24c02"; + pagesize = <8>; + reg = <0x50>; + }; + + tca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <20 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tca6416_pins>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1 { + status = "okay"; + dr_mode = "otg"; +}; + +&cppi41dma { + status = "okay"; +}; + +#include "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + ti,en-ck32k-xtal = <1>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + dual_emac = <1>; + + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <7>; + phy-mode = "rgmii-txid"; + dual_emac_res_vlan = <2>; +}; + +&phy_sel { + rmii-clock-ext = <1>; +}; + +&mmc1 { + vmmc-supply = <&vmmc_reg>; + status = "okay"; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&wl12xx_vmmc>; + ti,non-removable; + bus-width = <4>; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&gpio0 { + ti,no-reset-on-init; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index dbb3f4d2bf84..fec78349c1f3 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -81,6 +81,13 @@ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ @@ -218,8 +225,67 @@ reg = <0x24>; }; + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + cape_eeprom0: cape_eeprom0@54 { + compatible = "at,24c256"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + cape0_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom1: cape_eeprom1@55 { + compatible = "at,24c256"; + reg = <0x55>; + #address-cells = <1>; + #size-cells = <1>; + cape1_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom2: cape_eeprom2@56 { + compatible = "at,24c256"; + reg = <0x56>; + #address-cells = <1>; + #size-cells = <1>; + cape2_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom3: cape_eeprom3@57 { + compatible = "at,24c256"; + reg = <0x57>; + #address-cells = <1>; + #size-cells = <1>; + cape3_data: cape_data@0 { + reg = <0 0x100>; + }; + }; }; + /include/ "tps65217.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 66342515df20..765be2766eb0 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "TI AM335x EVM"; @@ -38,6 +39,20 @@ regulator-boot-on; }; + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WLAN_EN GPIO for this board - Bank1, pin16 */ + gpio = <&gpio1 16 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; + matrix_keypad: matrix_keypad@0 { compatible = "gpio-matrix-keypad"; debounce-delay-ms = <5>; @@ -176,6 +191,15 @@ >; }; + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + >; + }; + clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ @@ -266,6 +290,25 @@ >; }; + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */ + 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */ + 0x4C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */ + 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */ + 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */ + 0x8C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */ + >; + }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */ + 0x19C (PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ + 0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */ + >; + }; + lcd_pins_s0: lcd_pins_s0 { pinctrl-single,pins = < 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ @@ -323,6 +366,13 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -665,6 +715,37 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; +&mmc3 { + /* these are on the crossbar and are outlined in the + xbar-event-map element */ + dmas = <&edma 12 + &edma 13>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wlan_pins>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio3>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&edma { + ti,edma-xbar-event-map = /bits/ 16 <1 12 + 2 13>; +}; + &sham { status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts new file mode 100644 index 000000000000..3303c281697b --- /dev/null +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -0,0 +1,482 @@ +/* + * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + model = "Toby Churchill SL50 Series"; + compatible = "tcl,am335x-sl50", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led@0 { + label = "sl50:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@1 { + label = "sl50:red:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@2 { + label = "sl50:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@3 { + label = "sl50:red:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + backlight0: disp0 { + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 500000 0>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; + default-brightness-level = <6>; + }; + + backlight1: disp1 { + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 1 500000 0>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; + default-brightness-level = <6>; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "AM335x-SL50"; + ti,audio-codec = <&audio_codec>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1R", "Line In", + "LINE1L", "Line In"; + }; + + emmc_pwrseq: pwrseq@0 { + compatible = "mmc-pwrseq-emmc"; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pwrseq_pins>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&lwb_pins>; + + led_pins: pinmux_led_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ + AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rxd.i2c1_sda */ + AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_txdi2c1_scl */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a4.gpio1_20 */ + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; + + audio_pins: pinmux_audio_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ + AM33XX_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + >; + }; + + ehrpwm1_pins: pinmux_ehrpwm1a_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.ehrpwm1b */ + >; + }; + + lwb_pins: pinmux_lwb_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) /* SoundPA_en - mcasp0_fsr.gpio3_19 */ + AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* nKbdOnC - gpmc_ad10.gpio0_26 */ + AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */ + AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* nDispReset - gpmc_ad14.gpio1_14 */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */ + /* AVR Programming - SPI Bus (bit bang) - Screen and Keyboard */ + AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattMOSI spi0_d0.gpio0_3 */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattMISO spi0_d1.gpio0_4 */ + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattSCLK spi0_clk.gpio0_2 */ + /* PDI Bus - Battery system */ + AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */ + AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */ + >; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + eeprom: eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <400000>; + + audio_codec: tlv320aic3106@1b { + status = "okay"; + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + + AVDD-supply = <&ldo4_reg>; + IOVDD-supply = <&ldo4_reg>; + DRVDD-supply = <&ldo4_reg>; + DVDD-supply = <&ldo3_reg>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + bus-width = <4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + vmmc-supply = <&vmmcsd_fixed>; + mmc-pwrseq = <&emmc_pwrseq>; +}; + +&mcasp0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_pins>; + + op-mode = <0>; /* MCASP_ISS_MODE */ + tdm-slots = <2>; + serial-dir = < + 2 0 1 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; +}; + +#include "tps65217.dtsi" + +&tps { + ti,pmic-shutdown-controller; + + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + regulators { + dcdc1_reg: regulator@0 { + /* VDDS_DDR */ + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + /* VRTC / VIO / VDDS*/ + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2_reg: regulator@4 { + /* VDD_3V3AUX */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3_reg: regulator@5 { + /* VDD_1V8 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + /* VDD_3V3A */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; +}; + +&mac { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; +}; + +&davinci_mdio { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&ehrpwm1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ehrpwm1_pins>; +}; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index f164dce08755..5e3f5e86ffcf 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -60,6 +60,17 @@ dma-names = "tx", "rx"; clock-frequency = <48000000>; }; + + omap3_pmx_core2: pinmux@480025d8 { + compatible = "ti,omap3-padconf", "pinctrl-single"; + reg = <0x480025d8 0x24>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xff1f>; + }; }; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 26956cb50835..84aa30c3235a 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -21,6 +21,7 @@ aliases { display0 = &lcd0; + serial3 = &uart3; }; vmmcsd_fixed: fixedregulator-sd { @@ -42,6 +43,15 @@ gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; }; + vmmcwl_fixed: fixedregulator-mmcwl { + compatible = "regulator-fixed"; + regulator-name = "vmmcwl_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; @@ -106,9 +116,21 @@ }; }; }; + + /* fixed 12MHz oscillator */ + refclk: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + }; &am43xx_pinmux { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wlan_pins_default>; + pinctrl-1 = <&wlan_pins_sleep>; + i2c0_pins: i2c0_pins { pinctrl-single,pins = < 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ @@ -340,6 +362,53 @@ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ >; }; + + mmc3_pins_default: pinmux_mmc3_pins_default { + pinctrl-single,pins = < + 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ + 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ + 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ + 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ + 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */ + >; + }; + + mmc3_pins_sleep: pinmux_mmc3_pins_sleep { + pinctrl-single,pins = < + 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */ + 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */ + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */ + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */ + 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */ + >; + }; + + wlan_pins_default: pinmux_wlan_pins_default { + pinctrl-single,pins = < + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ + 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ + >; + }; + + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ + 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ + 0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ + >; + }; + + uart3_pins: uart3_pins { + pinctrl-single,pins = < + 0x228 (PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */ + 0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */ + 0x230 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */ + 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */ + >; + }; }; &i2c0 { @@ -403,6 +472,21 @@ regulator-always-on; }; }; + + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + + clocks = <&refclk 0>; + clock-names = "xvclk"; + + port { + ov2659_0: endpoint { + remote-endpoint = <&vpfe1_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; }; &i2c1 { @@ -422,6 +506,21 @@ touchscreen-size-x = <1024>; touchscreen-size-y = <600>; }; + + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + + clocks = <&refclk 0>; + clock-names = "xvclk"; + + port { + ov2659_1: endpoint { + remote-endpoint = <&vpfe0_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; }; &epwmss0 { @@ -446,6 +545,10 @@ status = "okay"; }; +&gpio1 { + status = "okay"; +}; + &gpio3 { status = "okay"; }; @@ -468,6 +571,43 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; +&mmc3 { + status = "okay"; + /* these are on the crossbar and are outlined in the + xbar-event-map element */ + dmas = <&edma 30 + &edma 31>; + dma-names = "tx", "rx"; + vmmc-supply = <&vmmcwl_fixed>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc3_pins_default>; + pinctrl-1 = <&mmc3_pins_sleep>; + cap-power-off-card; + keep-power-in-suspend; + ti,non-removable; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&edma { + ti,edma-xbar-event-map = /bits/ 16 <1 30 + 2 31>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + &usb2_phy1 { status = "okay"; }; @@ -625,7 +765,7 @@ port { vpfe0_ep: endpoint { - /* remote-endpoint = <&sensor>; add once we have it */ + remote-endpoint = <&ov2659_1>; ti,am437x-vpfe-interface = <0>; bus-width = <8>; hsync-active = <0>; @@ -642,7 +782,7 @@ port { vpfe1_ep: endpoint { - /* remote-endpoint = <&sensor>; add once we have it */ + remote-endpoint = <&ov2659_0>; ti,am437x-vpfe-interface = <0>; bus-width = <8>; hsync-active = <0>; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 19f3bf271915..03542f7b5b94 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -162,7 +162,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l25635e"; + compatible = "mx25l25635e", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <50000000>; }; diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts new file mode 100644 index 000000000000..af4dc548c1c0 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts @@ -0,0 +1,357 @@ +/* + * Device Tree file for D-Link DNS-327L + * + * Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* Remaining unsolved: + * There's still some unknown device on i2c address 0x13 + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "armada-370.dtsi" + +/ { + model = "D-Link DNS-327L"; + compatible = "dlink,dns327l", + "marvell,armada370", + "marvell,armada-370-xp"; + + chosen { + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MiB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + + internal-regs { + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + usb@50000 { + status = "okay"; + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "u-boot"; + /* 1.0 MiB */ + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + /* 128 KiB */ + reg = <0x100000 0x20000>; + read-only; + }; + + partition@120000 { + label = "uImage"; + /* 7 MiB */ + reg = <0x120000 0x700000>; + }; + + partition@820000 { + label = "ubifs"; + /* ~ 84 MiB */ + reg = <0x820000 0x54e0000>; + }; + + /* Hardcoded into stock bootloader */ + partition@5d00000 { + label = "failsafe-uImage"; + /* 5 MiB */ + reg = <0x5d00000 0x500000>; + }; + + partition@6200000 { + label = "failsafe-fs"; + /* 29 MiB */ + reg = <0x6200000 0x1d00000>; + }; + + partition@7f00000 { + label = "bbt"; + /* 1 MiB for BBT */ + reg = <0x7f00000 0x100000>; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = < + &backup_button_pin + &power_button_pin + &reset_button_pin>; + pinctrl-names = "default"; + + power-button { + label = "Power Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + backup-button { + label = "Backup Button"; + linux,code = <KEY_COPY>; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + }; + + reset-button { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = < + &sata_l_amber_pin + &sata_r_amber_pin + &backup_led_pin + /* Ensure these are managed by hardware */ + &sata_l_white_pin + &sata_r_white_pin>; + + pinctrl-names = "default"; + + sata-r-amber-pin { + label = "dns327l:amber:sata-r"; + gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + sata-l-amber-pin { + label = "dns327l:amber:sata-l"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + backup-led-pin { + label = "dns327l:white:usb"; + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-0 = <&xhci_pwr_pin>; + pinctrl-names = "default"; + regulator-name = "USB3.0 Port Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + + sata_r_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-0 = <&sata_r_pwr_pin>; + pinctrl-names = "default"; + regulator-name = "SATA-R Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <2000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + }; + + sata_l_power: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-0 = <&sata_l_pwr_pin>; + pinctrl-names = "default"; + regulator-name = "SATA-L Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <4000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + sata_l_white_pin: sata-l-white-pin { + marvell,pins = "mpp57"; + marvell,function = "sata0"; + }; + + sata_r_white_pin: sata-r-white-pin { + marvell,pins = "mpp55"; + marvell,function = "sata1"; + }; + + sata_r_amber_pin: sata-r-amber-pin { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + + sata_l_amber_pin: sata-l-amber-pin { + marvell,pins = "mpp53"; + marvell,function = "gpio"; + }; + + backup_led_pin: backup-led-pin { + marvell,pins = "mpp61"; + marvell,function = "gpo"; + }; + + xhci_pwr_pin: xhci-pwr-pin { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + sata_r_pwr_pin: sata-r-pwr-pin { + marvell,pins = "mpp54"; + marvell,function = "gpio"; + }; + + sata_l_pwr_pin: sata-l-pwr-pin { + marvell,pins = "mpp56"; + marvell,function = "gpio"; + }; + + uart1_pins: uart1-pins { + marvell,pins = "mpp60", "mpp61"; + marvell,function = "uart1"; + }; + + power_button_pin: power-button-pin { + marvell,pins = "mpp65"; + marvell,function = "gpio"; + }; + + backup_button_pin: backup-button-pin { + marvell,pins = "mpp63"; + marvell,function = "gpio"; + }; + + reset_button_pin: reset-button-pin { + marvell,pins = "mpp64"; + marvell,function = "gpio"; + }; +}; + +/* Serial console */ +&uart0 { + status = "okay"; +}; + +/* Connected to Weltrend MCU */ +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + marvell,reg-init = <0x0 0x16 0x0 0x0002>, + <0x0 0x19 0x0 0x0077>, + <0x0 0x18 0x0 0x5747>; + }; +}; + +ð1 { + phy = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&i2c0 { + compatible = "marvell,mv64xxx-i2c"; + clock-frequency = <100000>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index b42b767763aa..4f4924362bf0 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -92,7 +92,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q064"; + compatible = "micron,n25q064", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <20000000>; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index ec96f0b36346..7f0252c580e4 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -149,7 +149,6 @@ }; spi0: spi@10600 { - compatible = "marvell,armada-370-spi", "marvell,orion-spi"; reg = <0x10600 0x28>; #address-cells = <1>; #size-cells = <0>; @@ -160,7 +159,6 @@ }; spi1: spi@10680 { - compatible = "marvell,armada-370-spi", "marvell,orion-spi"; reg = <0x10680 0x28>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 00b50db57c9c..3f036bd635f4 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -139,11 +139,15 @@ * board level if a different configuration is used. */ spi0: spi@10600 { + compatible = "marvell,armada-370-spi", + "marvell,orion-spi"; pinctrl-0 = <&spi0_pins1>; pinctrl-names = "default"; }; spi1: spi@10680 { + compatible = "marvell,armada-370-spi", + "marvell,orion-spi"; pinctrl-0 = <&spi1_pins>; pinctrl-names = "default"; }; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 4eabc9c21f8d..5711b97e876c 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -81,7 +81,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q128a13"; + compatible = "n25q128a13", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <108000000>; }; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index f076ff856d8b..67a0ab0f71e0 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -238,7 +238,8 @@ }; spi0: spi@10600 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-375-spi", + "marvell,orion-spi"; reg = <0x10600 0x50>; #address-cells = <1>; #size-cells = <0>; @@ -249,7 +250,8 @@ }; spi1: spi@10680 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-375-spi", + "marvell,orion-spi"; reg = <0x10680 0x50>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 7219ac3a3d90..89f5a95954ed 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -70,7 +70,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p128"; + compatible = "st,m25p128", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <54000000>; }; diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts new file mode 100644 index 000000000000..f3cee918d285 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts @@ -0,0 +1,114 @@ +/* + * Device Tree include for the Linksys WRT1200AC (Caiman) + * + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-385-linksys.dtsi" + +/ { + model = "Linksys WRT1200AC"; + compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + + soc { + internal-regs{ + i2c@11000 { + + pca9635@68 { + #address-cells = <1>; + #size-cells = <0>; + + wan_amber@0 { + label = "caiman:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "caiman:white:wan"; + reg = <0x1>; + }; + + wlan_2g@2 { + label = "caiman:white:wlan_2g"; + reg = <0x2>; + }; + + wlan_5g@3 { + label = "caiman:white:wlan_5g"; + reg = <0x3>; + }; + + usb2@5 { + label = "caiman:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "caiman:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "caiman:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "caiman:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "caiman:amber:wps"; + reg = <0x9>; + }; + }; + }; + }; + }; + + gpio-leds { + power { + label = "caiman:white:power"; + }; + + sata { + label = "caiman:white:sata"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts new file mode 100644 index 000000000000..111071860559 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts @@ -0,0 +1,114 @@ +/* + * Device Tree file for the Linksys WRT1900ACv2 (Cobra) + * + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-385-linksys.dtsi" + +/ { + model = "Linksys WRT1900ACv2"; + compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + + soc { + internal-regs{ + i2c@11000 { + + pca9635@68 { + #address-cells = <1>; + #size-cells = <0>; + + wan_amber@0 { + label = "cobra:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "cobra:white:wan"; + reg = <0x1>; + }; + + wlan_2g@2 { + label = "cobra:white:wlan_2g"; + reg = <0x2>; + }; + + wlan_5g@3 { + label = "cobra:white:wlan_5g"; + reg = <0x3>; + }; + + usb2@5 { + label = "cobra:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "cobra:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "cobra:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "cobra:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "cobra:amber:wps"; + reg = <0x9>; + }; + }; + }; + }; + }; + + gpio-leds { + power { + label = "cobra:white:power"; + }; + + sata { + label = "cobra:white:sata"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi new file mode 100644 index 000000000000..74a9c6b54fa7 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -0,0 +1,332 @@ +/* + * Device Tree include file for Armada 385 based Linksys boards + * + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-385.dtsi" + +/ { + model = "Linksys boards based on Armada 385"; + compatible = "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + + spi@10600 { + status = "disabled"; + }; + + i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + pca9635@68 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9635"; + reg = <0x68>; + }; + }; + + /* J10: VCC, NC, RX, NC, TX, GND */ + serial@12000 { + status = "okay"; + }; + + ethernet@70000 { + status = "okay"; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + ethernet@34000 { + status = "okay"; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + mdio { + status = "okay"; + }; + + sata@a8000 { + status = "okay"; + }; + + /* USB part of the eSATA/USB 2.0 port */ + usb@50000 { + status = "okay"; + }; + + usb3@f8000 { + status = "okay"; + usb-phy = <&usb3_phy>; + }; + + flash@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x200000 0x40000>; /* 256KB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x240000 0x40000>; /* 256KB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x2200000>; /* 34MB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MB */ + }; + + partition@3800000 { + label = "rootfs2"; + reg = <0x3800000 0x2200000>; /* 34MB */ + }; + + /* + * 38MB, last MB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x280000 0x680000>; /* 6.5MB */ + }; + }; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + /* Marvell 88W8864, 5GHz-only */ + status = "okay"; + }; + + pcie@2,0 { + /* Marvell 88W8864, 2GHz-only */ + status = "okay"; + }; + }; + }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_xhci0_vbus>; + }; + + reg_xhci0_vbus: xhci0-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&xhci0_vbus_pins>; + regulator-name = "xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&keys_pin>; + pinctrl-names = "default"; + + button@1 { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + button@2 { + label = "Factory Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&power_led_pin &sata_led_pin>; + pinctrl-names = "default"; + + power { + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + sata { + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + dsa@0 { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð2>; + dsa,mii-bus = <&mdio>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + }; + }; +}; + +&pinctrl { + keys_pin: keys-pin { + marvell,pins = "mpp24", "mpp47"; + marvell,function = "gpio"; + }; + + power_led_pin: power-led-pin { + marvell,pins = "mpp55"; + marvell,function = "gpio"; + }; + + sata_led_pin: sata-led-pin { + marvell,pins = "mpp54"; + marvell,function = "gpio"; + }; + + xhci0_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp50"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 51d1623de53e..91ac8c118f37 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -73,7 +73,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "w25q32"; + compatible = "w25q32", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <108000000>; }; diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 78514ab0b47a..fd4f6fd8a2e8 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -69,7 +69,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p128"; + compatible = "st,m25p128", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <50000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index 1dc6e2341cc2..b657b1687e5f 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -74,7 +74,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p128"; + compatible = "st,m25p128", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <108000000>; }; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 218a2acd36e5..04ecfe6e2bc6 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -167,7 +167,8 @@ }; spi0: spi@10600 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; reg = <0x10600 0x50>; #address-cells = <1>; #size-cells = <0>; @@ -178,7 +179,8 @@ }; spi1: spi@10680 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; reg = <0x10680 0x50>; #address-cells = <1>; #size-cells = <0>; @@ -495,7 +497,7 @@ status = "disabled"; }; - mdio@72004 { + mdio: mdio@72004 { #address-cells = <1>; #size-cells = <0>; compatible = "marvell,orion-mdio"; diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts index bbf83756c43c..788c3badb681 100644 --- a/arch/arm/boot/dts/armada-398-db.dts +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -73,7 +73,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <0>; - compatible = "n25q128a13"; + compatible = "n25q128a13", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <108000000>; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index ecd1318109ba..fc9864f85fc2 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -128,7 +128,8 @@ }; spi0: spi@10600 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-390-spi", + "marvell,orion-spi"; reg = <0x10600 0x50>; #address-cells = <1>; #size-cells = <0>; @@ -139,7 +140,8 @@ }; spi1: spi@10680 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-390-spi", + "marvell,orion-spi"; reg = <0x10680 0x50>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index dfd782b44e50..60bbfe32bb80 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -140,7 +140,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q128a13"; + compatible = "n25q128a13", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <108000000>; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 103782407618..7dd900f158be 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -222,7 +222,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p64"; + compatible = "m25p64", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <20000000>; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 565227eacf06..bf724ca96a33 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -227,7 +227,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q128a13"; + compatible = "n25q128a13", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <108000000>; }; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 6063428fa6a0..20267ad2f61e 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -114,7 +114,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q064"; + compatible = "micron,n25q064", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <20000000>; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 013d63f69e36..e78ce4ab6b75 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -85,10 +85,18 @@ }; spi0: spi@10600 { + compatible = "marvell,armada-xp-spi", + "marvell,orion-spi"; pinctrl-0 = <&spi0_pins>; pinctrl-names = "default"; }; + spi1: spi@10680 { + compatible = "marvell,armada-xp-spi", + "marvell,orion-spi"; + }; + + i2c0: i2c@11000 { compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; reg = <0x11000 0x100>; diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi index 5a660d0faf42..b1ad7cf6ac02 100644 --- a/arch/arm/boot/dts/armv7-m.dtsi +++ b/arch/arm/boot/dts/armv7-m.dtsi @@ -8,6 +8,12 @@ reg = <0xe000e100 0xc00>; }; + systick: timer@e000e010 { + compatible = "arm,armv7m-systick"; + reg = <0xe000e010 0x10>; + status = "disabled"; + }; + soc { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts new file mode 100644 index 000000000000..c514502081d2 --- /dev/null +++ b/arch/arm/boot/dts/at91-ariettag25.dts @@ -0,0 +1,79 @@ +/* + * Device Tree file for Arietta G25 + * This device tree is minimal, to activate more peripherals, see: + * http://dts.acmesystems.it/arietta/ + */ +/dts-v1/; +#include "at91sam9g25.dtsi" +/ { + model = "Acme Systems Arietta G25"; + compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9"; + + aliases { + serial0 = &dbgu; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; + }; + + usb2: gadget@f803c000 { + status = "okay"; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + rtc@fffffeb0 { + status = "okay"; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <3>; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + arietta_led { + label = "arietta_led"; + gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */ + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts new file mode 100644 index 000000000000..bf18ece0c027 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -0,0 +1,159 @@ +/* + * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board + * + * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com> + * 2014-2015 Gaël PORTAY <g.portay@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9g20.dtsi" +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Overkiz Kizbox"; + compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x2000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + macb0: ethernet@fffc4000 { + phy-mode = "mii"; + pinctrl-0 = <&pinctrl_macb_rmii + &pinctrl_macb_rmii_mii_alt>; + status = "okay"; + }; + + usart3: serial@fffd0000 { + status = "okay"; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + watchdog@fffffd40 { + timeout-sec = <15>; + atmel,max-heartbeat-sec = <16>; + atmel,min-heartbeat-sec = <0>; + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <1>; + status = "okay"; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + status = "okay"; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + reset { + label = "PB_RST"; + gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + + user { + label = "PB_USER"; + gpios = <&pioB 31 GPIO_ACTIVE_HIGH>; + linux,code = <0x101>; + gpio-key,wakeup; + }; + }; + + i2c@0 { + status = "okay"; + + rtc: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + pwm_leds { + compatible = "pwm-leds"; + + network_green { + label = "pwm:green:network"; + pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + network_red { + label = "pwm:red:network"; + pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + user_green { + label = "pwm:green:user"; + pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + user_red { + label = "pwm:red:user"; + pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; + + tcb_pwm: pwm { + compatible = "atmel,tcb-pwm"; + #pwm-cells = <3>; + tc-block = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tcb1_tioa0 + &pinctrl_tcb1_tioa1 + &pinctrl_tcb1_tioa2 + &pinctrl_tcb1_tiob0>; + }; +}; diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts new file mode 100644 index 000000000000..f0b1563cb3f1 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox2.dts @@ -0,0 +1,216 @@ +/* + * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board + * + * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d31.dtsi" +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Overkiz Kizbox 2"; + compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + i2c1: i2c@f0018000 { + status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "okay"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG1 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vddana_reg: LDO_REG2 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vled_reg: LDO_REG3 { + regulator-name = "VLED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v3v8_rf_reg: LDO_REG4 { + regulator-name = "V3V8_RF"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-always-on; + }; + }; + }; + }; + + usart0: serial@f001c000 { + status = "okay"; + }; + + usart1: serial@f0020000 { + status = "okay"; + }; + + pwm0: pwm@f002c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwmh0_1 + &pinctrl_pwm0_pwmh1_1 + &pinctrl_pwm0_pwmh2_0>; + status = "okay"; + }; + + adc0: adc@f8018000 { + atmel,adc-vref = <3333>; + status = "okay"; + }; + + usart2: serial@f8020000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + dbgu: serial@ffffee00 { + status = "okay"; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + usb1: ohci@00600000 { + status = "okay"; + }; + + usb2: ehci@00700000 { + status = "okay"; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + prog { + label = "PB_PROG"; + gpios = <&pioE 27 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + gpio-key,wakeup; + }; + + reset { + label = "PB_RST"; + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + + user { + label = "PB_USER"; + gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; + linux,code = <0x101>; + gpio-key,wakeup; + }; + }; + + pwm_leds { + compatible = "pwm-leds"; + + blue { + label = "pwm:blue:user"; + pwms = <&pwm0 2 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + green { + label = "pwm:green:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + red { + label = "pwm:red:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts new file mode 100644 index 000000000000..9f72b4932634 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizboxmini.dts @@ -0,0 +1,129 @@ +/* + * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board + * + * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9g25.dtsi" +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Overkiz Kizbox mini"; + compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + usart0: serial@f801c000 { + status = "okay"; + }; + + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + pwm0: pwm@f8034000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm0_1 + &pinctrl_pwm0_pwm1_1>; + status = "okay"; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + usb0: ohci@00600000 { + num-ports = <1>; + status = "okay"; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + prog { + label = "PB_PROG"; + gpios = <&pioC 17 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + gpio-key,wakeup; + }; + + reset { + label = "PB_RST"; + gpios = <&pioC 16 GPIO_ACTIVE_LOW>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + }; + + pwm_leds { + compatible = "pwm-leds"; + + green { + label = "pwm:green:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + red { + label = "pwm:red:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 9991240b7438..d81474e0bcd6 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -14,7 +14,7 @@ compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5"; chosen { - bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; memory { @@ -35,6 +35,8 @@ apb { mmc0: mmc@f0000000 { pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; + vmmc-supply = <&vcc_mmc0_reg>; + vqmmc-supply = <&vcc_3v3_reg>; status = "okay"; slot@0 { reg = <0>; @@ -43,6 +45,17 @@ }; }; + mmc1: mmc@f8000000 { + vmmc-supply = <&vcc_3v3_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + status = "disabled"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>; + }; + }; + spi0: spi@f0004000 { cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; status = "okay"; @@ -105,7 +118,13 @@ macb0: ethernet@f0028000 { phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; + + ethernet-phy@7 { + reg = <0x7>; + }; }; pwm0: pwm@f002c000 { @@ -215,12 +234,6 @@ }; }; }; - - pmc: pmc@fffffc00 { - main: mainck { - clock-frequency = <12000000>; - }; - }; }; nand0: nand@60000000 { @@ -284,6 +297,14 @@ }; }; + vcc_mmc0_reg: fixedregulator@0 { + compatible = "regulator-fixed"; + gpio = <&pioE 2 GPIO_ACTIVE_LOW>; + regulator-name = "mmc0-card-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + gpio_keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index c740e1a2a3a5..22ad7c959103 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -50,7 +50,8 @@ compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5"; chosen { - bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk"; + bootargs = "ignore_loglevel earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -106,6 +107,8 @@ mmc1: mmc@fc000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + vmmc-supply = <&vcc_mmc1_reg>; + vqmmc-supply = <&vcc_3v3_reg>; status = "okay"; slot@0 { reg = <0>; @@ -122,6 +125,11 @@ status = "okay"; }; + spi1: spi@fc018000 { + cs-gpios = <&pioB 21 0>; + status = "okay"; + }; + adc0: adc@fc034000 { atmel,adc-vref = <3300>; status = "okay"; @@ -238,4 +246,22 @@ linux,default-trigger = "heartbeat"; }; }; + + vcc_3v3_reg: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VCC 3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_mmc1_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + gpio = <&pioE 4 GPIO_ACTIVE_LOW>; + regulator-name = "VDD MCI1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_reg>; + }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 89ef4a540db5..d782f2926b73 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -50,7 +50,8 @@ compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5"; chosen { - bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk"; + bootargs = "ignore_loglevel earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -108,8 +109,8 @@ mmc0: mmc@f8000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; - slot@1 { - reg = <1>; + slot@0 { + reg = <0>; bus-width = <4>; cd-gpios = <&pioE 5 0>; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 6d0fa9b87f46..e3cfb9972f54 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -940,8 +940,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 2a5d21247d7e..8dab4b75ca97 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -12,6 +12,10 @@ model = "Atmel AT91RM9200 evaluation kit"; compatible = "atmel,at91rm9200ek", "atmel,at91rm9200"; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index d88fe62a2b2e..4bc347549102 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -1008,8 +1008,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index bf8d1856a55a..b2c44a07a3d0 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -75,8 +75,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&ohci_clk>, <&hclk0>, <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&ohci_clk>, <&hclk0>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index f4a765729c7a..2e92ac020f23 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -13,7 +13,8 @@ compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9"; chosen { - bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw"; + bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 111889b556cf..e36d966ef5e8 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -1010,8 +1010,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 5cf93eecd8f1..23381276ffb8 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -13,7 +13,8 @@ compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9"; chosen { - bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index dfaacb113f2e..57548a2c5a1e 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -10,7 +10,8 @@ / { chosen { - bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 70e59c5ceb2f..d260ba779ae5 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1291,8 +1291,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1300,8 +1300,8 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; - clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck"; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 33ce7ca2c404..1375d3362603 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -15,7 +15,8 @@ compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9"; chosen { - bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; + bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index a9e35dfc12d9..5c2a8c8c8bd4 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -949,9 +949,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, - <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 6e067c8a3502..eab17fcace6d 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -14,7 +14,8 @@ compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9"; chosen { - bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; + bootargs = "root=/dev/mtdblock1 rw rootfstype=jffs2"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index ebfd5ce9cb38..c9920c64791c 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -1065,13 +1065,6 @@ }; }; - rtc@fffffeb0 { - compatible = "atmel,at91rm9200-rtc"; - reg = <0xfffffeb0 0x40>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - status = "disabled"; - }; - rtc@fffffd20 { compatible = "atmel,at91sam9260-rtt"; reg = <0xfffffd20 0x10>; @@ -1085,6 +1078,14 @@ reg = <0xfffffd60 0x10>; status = "disabled"; }; + + rtc@fffffe00 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffe00 0x40>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 9be5b540eebf..558c9f220bed 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -13,7 +13,8 @@ compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9"; chosen { - bootargs = "console=ttyS0,115200 rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw"; + bootargs = "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw"; + stdout-path = "serial0:115200n8"; }; memory { @@ -181,13 +182,11 @@ }; }; - pmc: pmc@fffffc00 { - main: mainck { - clock-frequency = <12000000>; - }; + watchdog@fffffd40 { + status = "okay"; }; - watchdog@fffffd40 { + rtc@fffffe00 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 3aa56ae3410a..7521bdf17ef2 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -505,7 +505,7 @@ pinctrl_usart1_sck: usart1_sck-0 { atmel,pins = - <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */ + <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */ }; }; @@ -694,6 +694,52 @@ }; }; + pwm0 { + pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 { + atmel,pins = + <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 { + atmel,pins = + <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 { + atmel,pins = + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 { + atmel,pins = + <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 { + atmel,pins = + <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 { + atmel,pins = + <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 { + atmel,pins = + <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 { + atmel,pins = + <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 { + atmel,pins = + <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + }; + tcb0 { pinctrl_tcb0_tclk0: tcb0_tclk0-0 { atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; @@ -1176,8 +1222,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1185,8 +1231,8 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; - clock-names = "usb_clk", "ehci_clk", "uhpck"; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index cc83a37a7311..d237c462dfc6 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -13,7 +13,8 @@ compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + stdout-path = "serial0:115200n8"; }; ahb { diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index c20cf537f5a5..24c935c72e5e 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 7b52c33ea69a..e1ac07a16f92 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -212,6 +212,18 @@ status = "disabled"; }; + nand: nand@18046000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; + reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; + gic: interrupt-controller@19021000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index e479515099c3..668442b1bda5 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -1,5 +1,5 @@ /dts-v1/; -/include/ "bcm2835-rpi.dtsi" +#include "bcm2835-rpi.dtsi" / { compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; @@ -25,6 +25,6 @@ /* I2S interface */ i2s_alt0: i2s_alt0 { brcm,pins = <18 19 20 21>; - brcm,function = <4>; /* alt0 */ + brcm,function = <BCM2835_FSEL_ALT0>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index bafa46fc226a..ee89b79426cf 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -1,5 +1,5 @@ /dts-v1/; -/include/ "bcm2835-rpi.dtsi" +#include "bcm2835-rpi.dtsi" / { compatible = "raspberrypi,model-b", "brcm,bcm2835"; @@ -18,6 +18,6 @@ /* I2S interface */ i2s_alt2: i2s_alt2 { brcm,pins = <28 29 30 31>; - brcm,function = <6>; /* alt2 */ + brcm,function = <BCM2835_FSEL_ALT2>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index c7064487017d..46780bb48bbf 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -1,4 +1,4 @@ -/include/ "bcm2835.dtsi" +#include "bcm2835.dtsi" / { memory { @@ -21,17 +21,17 @@ gpioout: gpioout { brcm,pins = <6>; - brcm,function = <1>; /* GPIO out */ + brcm,function = <BCM2835_FSEL_GPIO_OUT>; }; alt0: alt0 { brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>; - brcm,function = <4>; /* alt0 */ + brcm,function = <BCM2835_FSEL_ALT0>; }; alt3: alt3 { brcm,pins = <48 49 50 51 52 53>; - brcm,function = <7>; /* alt3 */ + brcm,function = <BCM2835_FSEL_ALT3>; }; }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 3342cb1407bc..301c73f4ca33 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -1,4 +1,5 @@ -/include/ "skeleton.dtsi" +#include <dt-bindings/pinctrl/bcm2835.h> +#include "skeleton.dtsi" / { compatible = "brcm,bcm2835"; @@ -14,6 +15,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x7e000000 0x20000000 0x02000000>; + dma-ranges = <0x40000000 0x00000000 0x20000000>; timer@7e003000 { compatible = "brcm,bcm2835-system-timer"; @@ -60,6 +62,13 @@ reg = <0x7e104000 0x10>; }; + mailbox: mailbox@7e00b800 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7e00b880 0x40>; + interrupts = <0 1>; + #mbox-cells = <0>; + }; + gpio: gpio@7e200000 { compatible = "brcm,bcm2835-gpio"; reg = <0x7e200000 0xb4>; @@ -112,7 +121,7 @@ status = "disabled"; }; - i2c0: i2c@20205000 { + i2c0: i2c@7e205000 { compatible = "brcm,bcm2835-i2c"; reg = <0x7e205000 0x1000>; interrupts = <2 21>; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts new file mode 100644 index 000000000000..112a5a834ddc --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -0,0 +1,97 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Asus RT-AC56U + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "asus,rt-ac56u", "brcm,bcm4708"; + model = "Asus RT-AC56U (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + wan { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + all { + label = "bcm53xx:blue:all"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts new file mode 100644 index 000000000000..3600f56f46f4 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -0,0 +1,84 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Asus RT-AC68U + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "asus,rt-ac68u", "brcm,bcm4708"; + model = "Asus RT-AC68U (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + logo { + label = "bcm53xx:white:logo"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + brightness { + label = "Backlight"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index b359c1e6178e..24f0ab59bf1b 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708"; @@ -47,6 +48,12 @@ leds { compatible = "gpio-leds"; + usb { + label = "bcm53xx:blue:usb"; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + power0 { label = "bcm53xx:red:power"; gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 946c728c4eb7..f03939311717 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "luxul,xwc-1000", "brcm,bcm4708"; @@ -23,12 +24,8 @@ reg = <0x00000000 0x08000000>; }; - axi@18000000 { - nand@28000 { - reg = <0x00028000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - + nand: nand@18028000 { + nandcs@0 { partition@0 { label = "ubi"; reg = <0x00000000 0x08000000>; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 2ed9e5794785..326ce8f4e49c 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "netgear,r6250v1", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 39910428246a..3a94606d042b 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "netgear,r6300v2", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts new file mode 100644 index 000000000000..d6a033b97c70 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -0,0 +1,120 @@ +/* + * Broadcom BCM470X / BCM5301X arm platform code. + * DTS for SmartRG SR400ac + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "smartrg,sr400ac", "brcm,bcm4708"; + model = "SmartRG SR400ac"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + usb3-green { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + status-red { + label = "bcm53xx:red:status"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + status-green { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + status-blue { + label = "bcm53xx:blue:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan-red { + label = "bcm53xx:red:wan"; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 0ee85ea10bb2..71b98cfaf944 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm47081.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index db9131e03268..bb0cb0bfafaf 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm47081.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 7d6868acb1c6..184fd9214110 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm47081.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts new file mode 100644 index 000000000000..aedf3c426e1f --- /dev/null +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -0,0 +1,65 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Asus RT-AC87U + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708"; + model = "Asus RT-AC87U"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + wan { + label = "bcm53xx:red:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts new file mode 100644 index 000000000000..2a92e8d5ab34 --- /dev/null +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -0,0 +1,128 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WXR-1900DHP + * + * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708"; + model = "Buffalo WXR-1900DHP"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + usb { + label = "bcm53xx:green:usb"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router-amber { + label = "bcm53xx:amber:router"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + router-white { + label = "bcm53xx:white:router"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wireless-amber { + label = "bcm53xx:amber:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wireless-white { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + power { + label = "Power"; + linux,code = <KEY_POWER>; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + + aoss { + label = "AOSS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + }; + + /* Commit mode set by switch? */ + mode { + label = "Mode"; + linux,code = <KEY_SETUP>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + + /* Switch: AP mode */ + sw_ap { + label = "AP"; + linux,code = <BTN_0>; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + + eject { + label = "USB eject"; + linux,code = <KEY_EJECTCD>; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index ea26dd3ec03a..446c586cd473 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi new file mode 100644 index 000000000000..d10781e36f54 --- /dev/null +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi @@ -0,0 +1,24 @@ +/* + * Broadcom BCM470X / BCM5301X Nand chip defaults. + * + * This should be included if the NAND controller is on chip select 0 + * and uses 8 bit ECC. + * + * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/ { + nand@18028000 { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 78aec6270c2f..21fefd4cdc25 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -108,6 +108,30 @@ /* ChipCommon */ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + /* PCIe Controller 0 */ + <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + + /* PCIe Controller 1 */ + <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + + /* PCIe Controller 2 */ + <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + /* USB 2.0 Controller */ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, @@ -143,4 +167,16 @@ #gpio-cells = <2>; }; }; + + nand: nand@18028000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; + reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; }; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index f46329c8ad75..34cd64051250 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -26,6 +26,7 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0>; + enable-method = "brcm,bcm63138"; }; cpu@1 { @@ -33,6 +34,8 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <1>; + enable-method = "brcm,bcm63138"; + resets = <&pmb0 4 1>; }; }; @@ -105,6 +108,18 @@ reg = <0x1e620 0x20>; interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>; }; + + pmb0: reset-controller@4800c0 { + compatible = "brcm,bcm63138-pmb"; + reg = <0x4800c0 0x10>; + #reset-cells = <2>; + }; + + pmb1: reset-controller@4800e0 { + compatible = "brcm,bcm63138-pmb"; + reg = <0x4800e0 0x10>; + #reset-cells = <2>; + }; }; /* Legacy UBUS base */ @@ -114,6 +129,11 @@ #size-cells = <1>; ranges = <0 0xfffe8000 0x8100>; + timer: timer@80 { + compatible = "brcm,bcm6328-timer", "syscon"; + reg = <0x80 0x3c>; + }; + serial0: serial@600 { compatible = "brcm,bcm6345-uart"; reg = <0x600 0x1b>; @@ -131,5 +151,28 @@ clock-names = "periph"; status = "disabled"; }; + + nand: nand@2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand"; + reg = <0x2000 0x600>, <0xf0 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + interrupts = <GIC_SPI 38 0>; + interrupt-names = "nand"; + }; + + bootlut: bootlut@8000 { + compatible = "brcm,bcm63138-bootlut"; + reg = <0x8000 0x50>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&timer>; + offset = <0x34>; + mask = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts index 9eec2ac1112f..0bb8d17e4c2d 100644 --- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts +++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts @@ -12,3 +12,26 @@ <0x00 0x80000000 0x00 0x40000000>; }; }; + +&nand { + status = "okay"; + + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <1>; + nand-ecc-step-size = <512>; + nand-ecc-strength = <8>; + nand-on-flash-bbt; + + #size-cells = <2>; + #address-cells = <2>; + + flash1.rootfs0@0 { + reg = <0x0 0x0 0x0 0x80000000>; + }; + + flash1.rootfs1@80000000 { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 39ac7840d7ee..58dcd666257c 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -108,6 +108,65 @@ brcm,int-map-mask = <0x25c>, <0x7000000>; brcm,int-fwd-mask = <0x70000>; }; + + hif_intr2_intc: interrupt-controller@3e1000 { + compatible = "brcm,l2-intc"; + reg = <0x3e1000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 0x20 0x0>; + interrupt-parent = <&gic>; + interrupt-names = "hif"; + }; + + nand: nand@3e2800 { + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg-names = "nand", "flash-dma"; + reg = <0x3e2800 0x600>, <0x3e3000 0x2c>; + interrupt-parent = <&hif_intr2_intc>; + interrupts = <24>, <4>; + interrupt-names = "nand_ctlrdy", "flash_dma_done"; + }; + + sata@45a000 { + compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x45a000 0xa9c>, <0x458040 0x24>; + interrupts = <GIC_SPI 30 0>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy1>; + }; + }; + + sata_phy: sata-phy@458100 { + compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; + reg = <0x458100 0x1f00>; + reg-names = "phy"; + #address-cells = <0x1>; + #size-cells = <0x0>; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + sata_phy1: sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; }; smpboot { diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts index c9eb8565eac5..2f63052f9d48 100644 --- a/arch/arm/boot/dts/bcm958300k.dts +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -58,4 +58,20 @@ uart3: serial@18023000 { status = "okay"; }; + + nand: nand@18046000 { + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index 69c93395ecd2..370aa2cfddf2 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -28,3 +28,15 @@ &serial1 { status = "okay"; }; + +&nand { + status = "okay"; + + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + brcm,nand-oob-sectors-size = <16>; + }; +}; diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts index 86d85d8896a3..5c99fb3a4d10 100644 --- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts +++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts @@ -3,9 +3,37 @@ * * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 63d00a63cfa6..da9adf8f69da 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -6,9 +6,37 @@ * based on GPL'ed 2.6 kernel sources * (c) Marvell International Ltd. * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts index 30270be4d0c9..772165ad0a52 100644 --- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts +++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts @@ -3,9 +3,37 @@ * * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 81b670ac494a..cb2a97cb9579 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -6,9 +6,37 @@ * based on GPL'ed 2.6 kernel sources * (c) Marvell International Ltd. * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index a98ac1bd8f65..4a749e5b3b44 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -1,9 +1,37 @@ /* * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index be5397288d24..703ce384e0d7 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -1,9 +1,37 @@ /* * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/berlin2q.h> diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi index 490c08075e67..af333261d046 100644 --- a/arch/arm/boot/dts/cx92755.dtsi +++ b/arch/arm/boot/dts/cx92755.dtsi @@ -82,6 +82,12 @@ clocks = <&main_clk>; }; + rtc@f0000c30 { + compatible = "cnxt,cx92755-rtc"; + reg = <0xf0000c30 0x18>; + interrupts = <25>; + }; + uc_regs: syscon@f00003a0 { compatible = "cnxt,cx92755-uc", "syscon"; reg = <0xf00003a0 0x10>; @@ -110,4 +116,15 @@ interrupts = <46>; status = "disabled"; }; + + i2c: i2c@f0000120 { + compatible = "cnxt,cx92755-i2c"; + reg = <0xf0000120 0x10>; + interrupts = <28>; + clocks = <&main_clk>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts index f33bf5635d47..90d52cc416dc 100644 --- a/arch/arm/boot/dts/cx92755_equinox.dts +++ b/arch/arm/boot/dts/cx92755_equinox.dts @@ -72,3 +72,7 @@ &uart0 { status = "okay"; }; + +&i2c { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts deleted file mode 100644 index 50c0d6904497..000000000000 --- a/arch/arm/boot/dts/dove-cm-a510.dts +++ /dev/null @@ -1,38 +0,0 @@ -/dts-v1/; - -#include "dove.dtsi" - -/ { - model = "Compulab CM-A510"; - compatible = "compulab,cm-a510", "marvell,dove"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x40000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - }; -}; - -&uart0 { status = "okay"; }; -&uart1 { status = "okay"; }; -&sdio0 { status = "okay"; }; -&sdio1 { status = "okay"; }; -&sata0 { status = "okay"; }; - -&spi0 { - status = "okay"; - - /* spi0.0: 4M Flash Winbond W25Q32BV */ - spi-flash@0 { - compatible = "st,w25q32"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&i2c0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi new file mode 100644 index 000000000000..59b4056b478f --- /dev/null +++ b/arch/arm/boot/dts/dove-cm-a510.dtsi @@ -0,0 +1,195 @@ +/* + * Device Tree include for Compulab CM-A510 System-on-Module + * + * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * The CM-A510 comes with several optional components: + * + * Memory options: + * D512: 512M + * D1024: 1G + * + * NAND options: + * N512: 512M NAND + * + * Ethernet options: + * E1: PHY RTL8211D on internal GbE (SMI address 0x03) + * E2: Additional ethernet NIC RTL8111D on PCIe1 + * + * Audio options: + * A: TI TLV320AIC23b audio codec (I2C address 0x1a) + * + * Touchscreen options: + * I: TI TSC2046 touchscreen controller (on SPI1) + * + * USB options: + * U2: 2 dual-role USB2.0 ports + * U4: 2 additional USB2.0 host ports (via USB1) + * + * WiFi options: + * W: Broadcom BCM4319 802.11b/g/n (USI WM-N-BM-01 on SDIO1) + * + * GPIOs used on CM-A510: + * 1 GbE PHY reset (active low) + * 3 WakeUp + * 8 PowerOff (active low) + * 13 Touchscreen pen irq (active low) + * 65 System LED (active high) + * 69 USB Hub reset (active low) + * 70 WLAN reset (active low) + * 71 WLAN regulator (active high) + */ + +#include "dove.dtsi" + +/ { + model = "Compulab CM-A510"; + compatible = "compulab,cm-a510", "marvell,dove"; + + /* + * Set the minimum memory size here and let the + * bootloader set the real size. + */ + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + /* Set upper NAND data bit to GPO */ + pinctrl-0 = <&pmx_nand_gpo>; + pinctrl-names = "default"; + + system { + label = "cm-a510:system:green"; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + wifi_power: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "WiFi Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* Optional RTL8211D GbE PHY on SMI address 0x03 */ +ðphy { + reg = <3>; + status = "disabled"; +}; + +&i2c0 { + /* Optional TI TLV320AIC23b audio codec */ + opt_audio: audio@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + status = "disabled"; + }; +}; + +/* Optional RTL8111D GbE NIC on PCIe1 */ +&pcie { status = "disabled"; }; + +&pcie1 { + pinctrl-0 = <&pmx_pcie1_clkreq>; + pinctrl-names = "default"; + status = "disabled"; +}; + +&pinctrl { + pmx_uart2: pmx-uart2 { + marvell,pins = "mpp14", "mpp15"; + marvell,function = "uart2"; + }; +}; + +/* Optional Broadcom BCM4319 802.11b/g/n WiFi module */ +&sdio1 { + non-removable; + vmmc-supply = <&wifi_power>; + reset-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&spi0 { + status = "okay"; + + /* 1M Flash Winbond W25Q80BL */ + flash@0 { + compatible = "winbond,w25q80"; + spi-max-frequency = <80000000>; + reg = <0>; + }; +}; + +&spi1 { + pinctrl-0 = <&pmx_spi1_20_23>; + pinctrl-names = "default"; + status = "disabled"; + + /* Optional TI TSC2046 touchscreen controller */ + opt_touch: touchscreen@0 { + compatible = "ti,tsc2046"; + spi-max-frequency = <2500000>; + reg = <0>; + pinctrl-0 = <&pmx_gpio_13>; + pinctrl-names = "default"; + interrupts-extended = <&gpio0 13 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&uart2 { + pinctrl-0 = <&pmx_uart2>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/dove-sbc-a510.dts new file mode 100644 index 000000000000..288e707dea99 --- /dev/null +++ b/arch/arm/boot/dts/dove-sbc-a510.dts @@ -0,0 +1,182 @@ +/* + * Device Tree file for Compulab SBC-A510 Single Board Computer + * + * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * SBC-A510 comprises a PCA9555 I2C GPIO expander its GPIO lines connected to + * + * 0.0 USB0 VBUS_EN (active high) + * 0.1 USB0 VBUS_GOOD + * 0.2 DVI transmitter TI TFP410 MSEN + * 0.3 DVI transmitter TI TFP410 PD# (active low power down) + * 0.4 LVDS transmitter DS90C365 PD# (active low power down) + * 0.5 LCD nRST (active low reset) + * 0.6 PCIe0 nRST (active low reset) + * 0.7 mini-PCIe slot W_DISABLE# + * + * 1.0 MMC WP + * 1.1 Camera Input FPC FLASH_STB and P21.5 + * 1.2 Camera Input FPC WE and P21.22 + * 1.3 MMC VCC_EN (active high) and P21.7 + * 1.4 Camera Input FPC AFTR_RST and P21.17 + * 1.5 Camera Input FPC OE and P21.19 + * 1.6 Camera Input FPC SNPSHT and P21.6 + * 1.7 Camera Input FPC SHTR and P21.10 + */ + +/dts-v1/; + +#include "dove-cm-a510.dtsi" + +/ { + model = "Compulab SBC-A510"; + compatible = "compulab,sbc-a510", "compulab,cm-a510", "marvell,dove"; + + chosen { + stdout-path = &uart0; + }; + + regulators { + usb0_power: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>; + }; + + mmc_power: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "MMC Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* Ethernet0 depends on CM-A510 option E1 */ +&mdio { status = "disabled"; }; +ð { status = "disabled"; }; +ðphy { status = "disabled"; }; + +/* + * USB port 0 can be powered and monitored by I2C GPIO expander: + * VBUS_ENABLE on GPIO0, VBUS_GOOD on GPIO1 + */ +&ehci0 { + status = "okay"; + vbus-supply = <&usb0_power>; +}; + +/* USB port 1 (and ports 2, 3 if CM-A510 has U4 option) */ +&ehci1 { status = "okay"; }; + +/* + * I2C bus layout: + * i2c0: + * - Audio Codec, 0x1a (option from CM-A510) + * - DVI transmitter TI TFP410, 0x39 + * - HDMI/DVI DDC channel + * i2c1: + * - GPIO expander, NXP PCA9555, 0x20 + * - VGA DDC channel + */ +&i2c { + pinctrl-0 = <&pmx_i2c1>; + pinctrl-names = "default"; +}; + +&i2c0 { + /* TI TFP410 DVI transmitter */ + dvi: video@39 { + compatible = "ti,tfp410"; + reg = <0x39>; + powerdown-gpio = <&gpio_ext 3 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c1 { + status = "okay"; + + /* NXP PCA9555 GPIO expander */ + gpio_ext: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #gpio-cells = <2>; + }; +}; + +&pcie { status = "okay"; }; + +/* + * PCIe0 can be configured by Jumper E1 to be either connected to + * a mini-PCIe slot or a Pericom PI7C9X111 PCIe-to-PCI bridge. + */ +&pcie0 { + status = "okay"; + pinctrl-0 = <&pmx_pcie0_clkreq>; + pinctrl-names = "default"; + reset-gpios = <&gpio_ext 6 GPIO_ACTIVE_LOW>; +}; + +/* Ethernet1 depends on CM-A510 option E2 */ +&pcie1 { status = "disabled"; }; + +/* SATA connector */ +&sata0 { status = "okay"; }; + +/* + * SDIO0 is connected to a MMC/SD/SDIO socket, I2C GPIO expander has + * VCC_MMC_ENABLE on GPIO13, MMC_WP on GPIO10 + */ +&sdio0 { + vmmc-supply = <&mmc_power>; + wp-gpios = <&gpio_ext 10 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* UART0 on RS232 mini-connector */ +&uart0 { status = "okay"; }; +/* UART2 on pin headers */ +&uart2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 9ad829523a13..38b1f7e6004e 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -33,6 +33,42 @@ marvell,tauros2-cache-features = <0>; }; + i2c-mux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&i2c>; + + pinctrl-names = "i2c0", "i2c1", "i2c2"; + pinctrl-0 = <&pmx_i2cmux_0>; + pinctrl-1 = <&pmx_i2cmux_1>; + pinctrl-2 = <&pmx_i2cmux_2>; + + i2c0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; + + i2c1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + /* Requires pmx_i2c1 on i2c controller node */ + status = "disabled"; + }; + + i2c2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + /* Requires pmx_i2c2 on i2c controller node */ + status = "disabled"; + }; + }; + mbus { compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus"; #address-cells = <2>; @@ -123,7 +159,7 @@ status = "disabled"; }; - i2c0: i2c-ctrl@11000 { + i2c: i2c-ctrl@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; @@ -132,7 +168,7 @@ clock-frequency = <400000>; timeout-ms = <1000>; clocks = <&core_clk 0>; - status = "disabled"; + status = "okay"; }; uart0: serial@12000 { diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 19446273e4a7..1dee0aa4f40c 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -81,7 +81,7 @@ regulator-boot-on; }; - lan9220@20000000 { + ethernet@20000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x20000000 0x10000>; phy-mode = "mii"; @@ -96,7 +96,7 @@ }; &pfc { - uart1_pins: uart@e1030000 { + uart1_pins: serial@e1030000 { renesas,groups = "uart1_ctrl", "uart1_data"; renesas,function = "uart1"; }; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 1d483c1c8b48..a5863acc5fff 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -16,6 +16,7 @@ #include "exynos3250.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/samsung,s2mps11.h> / { model = "Samsung Monk board"; @@ -432,7 +433,7 @@ }; &rtc { - clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>; + clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; clock-names = "rtc", "rtc_src"; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 0b9906880c0c..031853b75528 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -16,6 +16,7 @@ #include "exynos3250.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/samsung,s2mps11.h> / { model = "Samsung Rinato board"; @@ -567,6 +568,10 @@ status = "okay"; }; +&jpeg { + status = "okay"; +}; + &mshc_0 { #address-cells = <1>; #size-cells = <0>; @@ -605,7 +610,7 @@ }; &rtc { - clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>; + clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; clock-names = "rtc", "rtc_src"; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index e3bfb11c6ef8..d7201333e3bc 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -189,7 +189,7 @@ }; rtc: rtc@10070000 { - compatible = "samsung,exynos3250-rtc"; + compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupts = <0 73 0>, <0 74 0>; interrupt-parent = <&pmu_system_controller>; @@ -243,6 +243,30 @@ interrupts = <0 240 0>; }; + jpeg: codec@11830000 { + compatible = "samsung,exynos3250-jpeg"; + reg = <0x11830000 0x1000>; + interrupts = <0 171 0>; + clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>; + clock-names = "jpeg", "sclk"; + power-domains = <&pd_cam>; + assigned-clocks = <&cmu CLK_MOUT_CAM_BLK>, <&cmu CLK_SCLK_JPEG>; + assigned-clock-rates = <0>, <150000000>; + assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>; + iommus = <&sysmmu_jpeg>; + status = "disabled"; + }; + + sysmmu_jpeg: sysmmu@11A60000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11a60000 0x1000>; + interrupts = <0 156 0>, <0 161 0>; + clock-names = "sysmmu", "master"; + clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; + fimd: fimd@11c00000 { compatible = "samsung,exynos3250-fimd"; reg = <0x11c00000 0x30000>; @@ -251,6 +275,7 @@ clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; power-domains = <&pd_lcd0>; + iommus = <&sysmmu_fimd0>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -270,6 +295,16 @@ status = "disabled"; }; + sysmmu_fimd0: sysmmu@11E20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11e20000 0x1000>; + interrupts = <0 80 0>, <0 81 0>; + clock-names = "sysmmu", "master"; + clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>; + power-domains = <&pd_lcd0>; + #iommu-cells = <0>; + }; + hsotg: hsotg@12480000 { compatible = "snps,dwc2"; reg = <0x12480000 0x20000>; @@ -364,9 +399,20 @@ clock-names = "mfc", "sclk_mfc"; clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>; power-domains = <&pd_mfc>; + iommus = <&sysmmu_mfc>; status = "disabled"; }; + sysmmu_mfc: sysmmu@13620000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13620000 0x1000>; + interrupts = <0 96 0>, <0 98 0>; + clock-names = "sysmmu", "master"; + clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>; + power-domains = <&pd_mfc>; + #iommu-cells = <0>; + }; + serial_0: serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index e20cdc24c3bb..f716e2b7d0b9 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -78,7 +78,6 @@ mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; - reg = <0x10020710 8>; #phy-cells = <1>; syscon = <&pmu_system_controller>; }; @@ -190,6 +189,7 @@ clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc0>; status = "disabled"; }; @@ -201,6 +201,7 @@ clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc1>; status = "disabled"; }; @@ -212,6 +213,7 @@ clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc2>; status = "disabled"; }; @@ -223,6 +225,7 @@ clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc3>; status = "disabled"; }; @@ -257,7 +260,7 @@ }; }; - watchdog@10060000 { + watchdog: watchdog@10060000 { compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; interrupts = <0 43 0>; @@ -266,7 +269,7 @@ status = "disabled"; }; - rtc@10070000 { + rtc: rtc@10070000 { compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupt-parent = <&pmu_system_controller>; @@ -276,7 +279,7 @@ status = "disabled"; }; - keypad@100A0000 { + keypad: keypad@100A0000 { compatible = "samsung,s5pv210-keypad"; reg = <0x100A0000 0x100>; interrupts = <0 109 0>; @@ -285,7 +288,7 @@ status = "disabled"; }; - sdhci@12510000 { + sdhci_0: sdhci@12510000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12510000 0x100>; interrupts = <0 73 0>; @@ -294,7 +297,7 @@ status = "disabled"; }; - sdhci@12520000 { + sdhci_1: sdhci@12520000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12520000 0x100>; interrupts = <0 74 0>; @@ -303,7 +306,7 @@ status = "disabled"; }; - sdhci@12530000 { + sdhci_2: sdhci@12530000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12530000 0x100>; interrupts = <0 75 0>; @@ -312,7 +315,7 @@ status = "disabled"; }; - sdhci@12540000 { + sdhci_3: sdhci@12540000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12540000 0x100>; interrupts = <0 76 0>; @@ -331,7 +334,7 @@ status = "disabled"; }; - hsotg@12480000 { + hsotg: hsotg@12480000 { compatible = "samsung,s3c6400-hsotg"; reg = <0x12480000 0x20000>; interrupts = <0 71 0>; @@ -342,7 +345,7 @@ status = "disabled"; }; - ehci@12580000 { + ehci: ehci@12580000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12580000 0x100>; interrupts = <0 70 0>; @@ -368,7 +371,7 @@ }; }; - ohci@12590000 { + ohci: ohci@12590000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12590000 0x100>; interrupts = <0 70 0>; @@ -417,6 +420,8 @@ power-domains = <&pd_mfc>; clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>; clock-names = "mfc", "sclk_mfc"; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; status = "disabled"; }; @@ -621,7 +626,7 @@ status = "disabled"; }; - pwm@139D0000 { + pwm: pwm@139D0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x139D0000 0x1000>; interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; @@ -681,6 +686,7 @@ clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; power-domains = <&pd_lcd0>; + iommus = <&sysmmu_fimd0>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -689,6 +695,15 @@ #include "exynos4412-tmu-sensor-conf.dtsi" }; + jpeg_codec: jpeg-codec@11840000 { + compatible = "samsung,exynos4210-jpeg"; + reg = <0x11840000 0x1000>; + interrupts = <0 88 0>; + clocks = <&clock CLK_JPEG>; + clock-names = "jpeg"; + power-domains = <&pd_cam>; + }; + hdmi: hdmi@12D00000 { compatible = "samsung,exynos4210-hdmi"; reg = <0x12D00000 0x70000>; @@ -709,6 +724,7 @@ interrupts = <0 91 0>; reg = <0x12C10000 0x2100>, <0x12c00000 0x300>; power-domains = <&pd_tv>; + iommus = <&sysmmu_tv>; status = "disabled"; }; @@ -819,4 +835,114 @@ clock-names = "ppmu"; status = "disabled"; }; + + sysmmu_mfc_l: sysmmu@13620000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13620000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; + power-domains = <&pd_mfc>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_r: sysmmu@13630000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13630000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; + power-domains = <&pd_mfc>; + #iommu-cells = <0>; + }; + + sysmmu_tv: sysmmu@12E20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12E20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>; + power-domains = <&pd_tv>; + #iommu-cells = <0>; + }; + + sysmmu_fimc0: sysmmu@11A20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; + + sysmmu_fimc1: sysmmu@11A30000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A30000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 3>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; + + sysmmu_fimc2: sysmmu@11A40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; + + sysmmu_fimc3: sysmmu@11A50000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A50000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg: sysmmu@11A60000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A60000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; + + sysmmu_rotator: sysmmu@12A30000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12A30000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; + power-domains = <&pd_lcd0>; + #iommu-cells = <0>; + }; + + sysmmu_fimd0: sysmmu@11E20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11E20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>; + power-domains = <&pd_lcd0>; + #iommu-cells = <0>; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index b81146141402..e0abfc3324d1 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -50,209 +50,6 @@ }; }; - watchdog@10060000 { - status = "okay"; - }; - - rtc@10070000 { - status = "okay"; - }; - - tmu@100C0000 { - status = "okay"; - }; - - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; - pinctrl-names = "default"; - vmmc-supply = <&mmc_reg>; - status = "okay"; - }; - - sdhci@12510000 { - bus-width = <4>; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; - pinctrl-names = "default"; - vmmc-supply = <&mmc_reg>; - status = "okay"; - }; - - g2d@12800000 { - status = "okay"; - }; - - codec@13400000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - - i2c@13860000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; - - max8997_pmic@66 { - compatible = "maxim,max8997-pmic"; - reg = <0x66>; - interrupt-parent = <&gpx0>; - interrupts = <4 0>, <3 0>; - - max8997,pmic-buck1-dvs-voltage = <1350000>; - max8997,pmic-buck2-dvs-voltage = <1100000>; - max8997,pmic-buck5-dvs-voltage = <1200000>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "VMIPI_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDD_RTC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD_AUD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VADC_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo9_reg: LDO9 { - regulator-name = "DVDD_SWB_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD_PLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD_AUD_3V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo14_reg: LDO14 { - regulator-name = "AVDD18_SWB_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "VDD_SWB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo21_reg: LDO21 { - regulator-name = "VDD_MIF_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - /* - * HACK: The real name is VDD_ARM_1.2V, - * but exynos-cpufreq does not support - * DT-based regulator lookup yet. - */ - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "VDD_INT_1.1V"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "VDD_G3D_1.1V"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDDQ_M1M2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "VDD_LCD_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; - }; - gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -314,12 +111,6 @@ }; }; - fimd@11c00000 { - pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; - pinctrl-names = "default"; - status = "okay"; - }; - display-timings { native-mode = <&timing0>; timing0: timing { @@ -335,3 +126,212 @@ }; }; }; + +&fimd { + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&g2d { + status = "okay"; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx0>; + interrupts = <4 0>, <3 0>; + + max8997,pmic-buck1-dvs-voltage = <1350000>; + max8997,pmic-buck2-dvs-voltage = <1100000>; + max8997,pmic-buck5-dvs-voltage = <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VMIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_RTC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_AUD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "DVDD_SWB_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_PLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_AUD_3V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "AVDD18_SWB_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDD_SWB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + /* + * HACK: The real name is VDD_ARM_1.2V, + * but exynos-cpufreq does not support + * DT-based regulator lookup yet. + */ + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_INT_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_G3D_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_LCD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; +}; + +&sdhci_0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; +}; + +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&tmu { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 86216fff1b4f..043b03caff8f 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -30,181 +30,181 @@ stdout-path = &serial_1; }; - sdhci@12530000 { - bus-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - status = "okay"; - }; + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <12000000>; + }; - g2d@12800000 { - status = "okay"; + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; }; +}; - codec@13400000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; - }; +&g2d { + status = "okay"; +}; - serial@13800000 { - status = "okay"; - }; +&i2c_0 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <100000>; + status = "okay"; - serial@13810000 { - status = "okay"; + eeprom@50 { + compatible = "samsung,24ad0xd1"; + reg = <0x50>; }; - serial@13820000 { - status = "okay"; + eeprom@52 { + compatible = "samsung,24ad0xd1"; + reg = <0x52>; }; +}; - serial@13830000 { - status = "okay"; +&keypad { + samsung,keypad-num-rows = <2>; + samsung,keypad-num-columns = <8>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_rows &keypad_cols>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <2>; }; - pinctrl@11000000 { - keypad_rows: keypad-rows { - samsung,pins = "gpx2-0", "gpx2-1"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - keypad_cols: keypad-cols { - samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", - "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; + key_2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <3>; }; - keypad@100A0000 { - samsung,keypad-num-rows = <2>; - samsung,keypad-num-columns = <8>; - linux,keypad-no-autorepeat; - linux,keypad-wakeup; - pinctrl-names = "default"; - pinctrl-0 = <&keypad_rows &keypad_cols>; - status = "okay"; + key_3 { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <4>; + }; - key_1 { - keypad,row = <0>; - keypad,column = <3>; - linux,code = <2>; - }; + key_4 { + keypad,row = <0>; + keypad,column = <6>; + linux,code = <5>; + }; - key_2 { - keypad,row = <0>; - keypad,column = <4>; - linux,code = <3>; - }; + key_5 { + keypad,row = <0>; + keypad,column = <7>; + linux,code = <6>; + }; - key_3 { - keypad,row = <0>; - keypad,column = <5>; - linux,code = <4>; - }; + key_a { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <30>; + }; - key_4 { - keypad,row = <0>; - keypad,column = <6>; - linux,code = <5>; - }; + key_b { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <48>; + }; - key_5 { - keypad,row = <0>; - keypad,column = <7>; - linux,code = <6>; - }; + key_c { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <46>; + }; - key_a { - keypad,row = <1>; - keypad,column = <3>; - linux,code = <30>; - }; + key_d { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <32>; + }; - key_b { - keypad,row = <1>; - keypad,column = <4>; - linux,code = <48>; - }; + key_e { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <18>; + }; +}; - key_c { - keypad,row = <1>; - keypad,column = <5>; - linux,code = <46>; - }; +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; +}; - key_d { - keypad,row = <1>; - keypad,column = <6>; - linux,code = <32>; - }; +&pinctrl_1 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; - key_e { - keypad,row = <1>; - keypad,column = <7>; - linux,code = <18>; - }; + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", + "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; +}; - i2c@13860000 { - #address-cells = <1>; - #size-cells = <0>; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <100000>; - status = "okay"; - - eeprom@50 { - compatible = "samsung,24ad0xd1"; - reg = <0x50>; - }; +&sdhci_2 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + status = "okay"; +}; - eeprom@52 { - compatible = "samsung,24ad0xd1"; - reg = <0x52>; - }; - }; +&serial_0 { + status = "okay"; +}; - spi_2: spi@13940000 { - cs-gpios = <&gpc1 2 0>; - status = "okay"; +&serial_1 { + status = "okay"; +}; - w25x80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "w25x80"; - reg = <0>; - spi-max-frequency = <1000000>; +&serial_2 { + status = "okay"; +}; - controller-data { - samsung,spi-feedback-delay = <0>; - }; +&serial_3 { + status = "okay"; +}; - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; - }; +&spi_2 { + cs-gpios = <&gpc1 2 0>; + status = "okay"; - partition@40000 { - label = "Kernel"; - reg = <0x40000 0xc0000>; - }; + w25x80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <1000000>; + + controller-data { + samsung,spi-feedback-delay = <0>; }; - }; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <12000000>; + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; }; - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; }; }; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 32c5fd8f6269..98f3ce65cb9a 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -89,42 +89,6 @@ }; }; - hsotg@12480000 { - vusb_d-supply = <&vusb_reg>; - vusb_a-supply = <&vusbdac_reg>; - dr_mode = "peripheral"; - status = "okay"; - }; - - sdhci_emmc: sdhci@12510000 { - bus-width = <8>; - non-removable; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; - pinctrl-names = "default"; - vmmc-supply = <&vemmc_reg>; - status = "okay"; - }; - - exynos-usbphy@125B0000 { - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - gpio-keys { compatible = "gpio-keys"; @@ -158,201 +122,6 @@ }; }; - i2c@13890000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <400000>; - pinctrl-0 = <&i2c3_bus>; - pinctrl-names = "default"; - status = "okay"; - - mms114-touchscreen@48 { - compatible = "melfas,mms114"; - reg = <0x48>; - interrupt-parent = <&gpx0>; - interrupts = <4 2>; - x-size = <720>; - y-size = <1280>; - avdd-supply = <&tsp_reg>; - vdd-supply = <&tsp_reg>; - }; - }; - - i2c@138B0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c5_bus>; - pinctrl-names = "default"; - status = "okay"; - - max8997_pmic@66 { - compatible = "maxim,max8997-pmic"; - - reg = <0x66>; - - max8997,pmic-buck1-uses-gpio-dvs; - max8997,pmic-buck2-uses-gpio-dvs; - max8997,pmic-buck5-uses-gpio-dvs; - - max8997,pmic-ignore-gpiodvs-side-effect; - max8997,pmic-buck125-default-dvs-idx = <0>; - - max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>, - <&gpx0 6 0>, - <&gpl0 0 0>; - - max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, - <1250000>, <1200000>, - <1150000>, <1100000>, - <1000000>, <950000>; - - max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, - <950000>, <900000>, - <1100000>, <1000000>, - <950000>, <900000>; - - max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; - - regulators { - valive_reg: LDO2 { - regulator-name = "VALIVE_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - vusb_reg: LDO3 { - regulator-name = "VUSB_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - vmipi_reg: LDO4 { - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vpda_reg: LDO6 { - regulator-name = "VCC_1.8V_PDA"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcam_reg: LDO7 { - regulator-name = "CAM_ISP_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vusbdac_reg: LDO8 { - regulator-name = "VUSB/VDAC_3.3V_C210"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vccpda_reg: LDO9 { - regulator-name = "VCC_2.8V_PDA"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - vpll_reg: LDO10 { - regulator-name = "VPLL_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - vtcam_reg: LDO12 { - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vcclcd_reg: LDO13 { - regulator-name = "VCC_3.3V_LCD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vlcd_reg: LDO15 { - regulator-name = "VLCD_2.2V"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - }; - - camsensor_reg: LDO16 { - regulator-name = "CAM_SENSOR_IO_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddq_reg: LDO21 { - regulator-name = "VDDQ_M1M2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - varm_breg: BUCK1 { - /* - * HACK: The real name is VARM_1.2V_C210, - * but exynos-cpufreq does not support - * DT-based regulator lookup yet. - */ - regulator-name = "vdd_arm"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - vint_breg: BUCK2 { - regulator-name = "VINT_1.1V_C210"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - camisp_breg: BUCK4 { - regulator-name = "CAM_ISP_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vmem_breg: BUCK5 { - regulator-name = "VMEM_1.2V_C210"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vccsub_breg: BUCK7 { - regulator-name = "VCC_SUB_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - safe1_sreg: ESAFEOUT1 { - regulator-name = "SAFEOUT1"; - regulator-always-on; - }; - - safe2_sreg: ESAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-boot-on; - }; - }; - }; - }; - fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -365,71 +134,6 @@ }; }; - dsi_0: dsi@11C80000 { - vddcore-supply = <&vusb_reg>; - vddio-supply = <&vmipi_reg>; - samsung,pll-clock-frequency = <24000000>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - remote-endpoint = <&dsi_in>; - samsung,burst-clock-frequency = <500000000>; - samsung,esc-clock-frequency = <20000000>; - }; - }; - }; - - panel@0 { - reg = <0>; - compatible = "samsung,s6e8aa0"; - vdd3-supply = <&vcclcd_reg>; - vci-supply = <&vlcd_reg>; - reset-gpios = <&gpy4 5 0>; - power-on-delay= <50>; - reset-delay = <100>; - init-delay = <100>; - flip-horizontal; - flip-vertical; - panel-width-mm = <58>; - panel-height-mm = <103>; - - display-timings { - timing-0 { - clock-frequency = <57153600>; - hactive = <720>; - vactive = <1280>; - hfront-porch = <5>; - hback-porch = <5>; - hsync-len = <5>; - vfront-porch = <13>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; - - port { - dsi_in: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; - }; - }; - - fimd@11c00000 { - status = "okay"; - }; - - tmu@100C0000 { - status = "okay"; - }; - thermal-zones { cpu_thermal: cpu-thermal { cooling-maps { @@ -483,3 +187,299 @@ }; }; }; + +&dsi_0 { + vddcore-supply = <&vusb_reg>; + vddio-supply = <&vmipi_reg>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&dsi_in>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + }; + }; + }; + + panel@0 { + reg = <0>; + compatible = "samsung,s6e8aa0"; + vdd3-supply = <&vcclcd_reg>; + vci-supply = <&vlcd_reg>; + reset-gpios = <&gpy4 5 0>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <58>; + panel-height-mm = <103>; + + display-timings { + timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + + port { + dsi_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&exynos_usbphy { + status = "okay"; +}; + +&fimd { + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&vusb_reg>; + vusb_a-supply = <&vusbdac_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpx0>; + interrupts = <4 2>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&tsp_reg>; + vdd-supply = <&tsp_reg>; + }; +}; + +&i2c_5 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; + status = "okay"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + + reg = <0x66>; + + max8997,pmic-buck1-uses-gpio-dvs; + max8997,pmic-buck2-uses-gpio-dvs; + max8997,pmic-buck5-uses-gpio-dvs; + + max8997,pmic-ignore-gpiodvs-side-effect; + max8997,pmic-buck125-default-dvs-idx = <0>; + + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>, + <&gpx0 6 0>, + <&gpl0 0 0>; + + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, + <950000>, <900000>, + <1100000>, <1000000>, + <950000>, <900000>; + + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + valive_reg: LDO2 { + regulator-name = "VALIVE_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vusb_reg: LDO3 { + regulator-name = "VUSB_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vmipi_reg: LDO4 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vpda_reg: LDO6 { + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcam_reg: LDO7 { + regulator-name = "CAM_ISP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vusbdac_reg: LDO8 { + regulator-name = "VUSB/VDAC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccpda_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vpll_reg: LDO10 { + regulator-name = "VPLL_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vtcam_reg: LDO12 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcclcd_reg: LDO13 { + regulator-name = "VCC_3.3V_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vlcd_reg: LDO15 { + regulator-name = "VLCD_2.2V"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + camsensor_reg: LDO16 { + regulator-name = "CAM_SENSOR_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddq_reg: LDO21 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + varm_breg: BUCK1 { + /* + * HACK: The real name is VARM_1.2V_C210, + * but exynos-cpufreq does not support + * DT-based regulator lookup yet. + */ + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vint_breg: BUCK2 { + regulator-name = "VINT_1.1V_C210"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + camisp_breg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vmem_breg: BUCK5 { + regulator-name = "VMEM_1.2V_C210"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vccsub_breg: BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-always-on; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; +}; + +&sdhci_0 { + bus-width = <8>; + non-removable; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; + pinctrl-names = "default"; + vmmc-supply = <&vemmc_reg>; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&tmu { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index be89f83f70e7..10d3c173396e 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -52,17 +52,7 @@ }; }; - pmu_system_controller: system-controller@10020000 { - clock-names = "clkout0", "clkout1", "clkout2", "clkout3", - "clkout4", "clkout8", "clkout9"; - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, - <&clock CLK_XUSBXTI>; - #clock-cells = <1>; - }; - - sysram@02020000 { + sysram: sysram@02020000 { compatible = "mmio-sram"; reg = <0x02020000 0x20000>; #address-cells = <1>; @@ -95,19 +85,7 @@ arm,data-latency = <2 2 1>; }; - gic: interrupt-controller@10490000 { - cpu-offset = <0x8000>; - }; - - combiner: interrupt-controller@10440000 { - samsung,combiner-nr = <16>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; - }; - - mct@10050000 { + mct: mct@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; interrupt-parent = <&mct_map>; @@ -189,12 +167,13 @@ }; }; - g2d@12800000 { + g2d: g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; interrupts = <0 89 0>; clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; clock-names = "sclk_fimg2d", "fimg2d"; + iommus = <&sysmmu_g2d>; status = "disabled"; }; @@ -244,4 +223,47 @@ clock-names = "ppmu"; status = "disabled"; }; + + sysmmu_g2d: sysmmu@12A20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12A20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 7>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + power-domains = <&pd_lcd0>; + #iommu-cells = <0>; + }; + + sysmmu_fimd1: sysmmu@12220000 { + compatible = "samsung,exynos-sysmmu"; + interrupt-parent = <&combiner>; + reg = <0x12220000 0x1000>; + interrupts = <5 3>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>; + power-domains = <&pd_lcd1>; + #iommu-cells = <0>; + }; +}; + +&gic { + cpu-offset = <0x8000>; +}; + +&combiner { + samsung,combiner-nr = <16>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; +}; + +&pmu_system_controller { + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; + #clock-cells = <1>; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index 5be03288f1ee..d9c8efeef208 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -41,12 +41,12 @@ reg = <0xA01>; }; }; +}; - combiner: interrupt-controller@10440000 { - samsung,combiner-nr = <18>; - }; +&combiner { + samsung,combiner-nr = <18>; +}; - gic: interrupt-controller@10490000 { - cpu-offset = <0x8000>; - }; +&gic { + cpu-offset = <0x8000>; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index d6b49e5b32e9..ca7d168d1dd6 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -38,16 +38,6 @@ }; }; - i2s0: i2s@03830000 { - pinctrl-0 = <&i2s0_bus>; - pinctrl-names = "default"; - status = "okay"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - }; - sound: sound { compatible = "simple-audio-card"; assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, @@ -83,427 +73,437 @@ reset-gpios = <&gpk1 2 1>; }; - mmc@12550000 { - pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; - pinctrl-names = "default"; - vmmc-supply = <&ldo20_reg &buck8_reg>; - mmc-pwrseq = <&emmc_pwrseq>; - status = "okay"; - - num-slots = <1>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - bus-width = <8>; - cap-mmc-highspeed; - }; - - watchdog@10060000 { - status = "okay"; - }; - - rtc@10070000 { - status = "okay"; - clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; - clock-names = "rtc", "rtc_src"; - }; - - g2d@10800000 { - status = "okay"; - }; - camera { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <>; + }; - fimc_0: fimc@11800000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC0>, - <&clock CLK_SCLK_FIMC0>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - }; - - fimc_1: fimc@11810000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC1>, - <&clock CLK_SCLK_FIMC1>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; }; - fimc_2: fimc@11820000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC2>, - <&clock CLK_SCLK_FIMC2>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; }; + }; - fimc_3: fimc@11830000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC3>, - <&clock CLK_SCLK_FIMC3>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; }; }; +}; - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&ldo4_reg &ldo21_reg>; - cd-gpios = <&gpk2 2 0>; - cd-inverted; - status = "okay"; - }; +/* RSTN signal for eMMC */ +&sd1_cd { + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; +}; - serial@13800000 { - status = "okay"; +&pinctrl_1 { + gpio_power_key: power_key { + samsung,pins = "gpx1-3"; + samsung,pin-pud = <0>; }; - serial@13810000 { - status = "okay"; + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <0>; - }; - - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; - }; + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <1>; }; +}; - i2c@13860000 { - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <400000>; - status = "okay"; +&ehci { + status = "okay"; +}; - usb3503: usb3503@08 { - compatible = "smsc,usb3503"; - reg = <0x08>; +&exynos_usbphy { + status = "okay"; +}; - intn-gpios = <&gpx3 0 0>; - connect-gpios = <&gpx3 4 0>; - reset-gpios = <&gpx3 5 0>; - initial-mode = <1>; - }; +&fimc_0 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; - max77686: pmic@09 { - compatible = "maxim,max77686"; - interrupt-parent = <&gpx3>; - interrupts = <2 0>; - pinctrl-names = "default"; - pinctrl-0 = <&max77686_irq>; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; +&fimc_1 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC1>, + <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; - ldo2_reg: LDO2 { - regulator-name = "VDDQ_M1_2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; +&fimc_2 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC2>, + <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; - ldo3_reg: LDO3 { - regulator-name = "VDDQ_EXT_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; +&fimc_3 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC3>, + <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; - ldo4_reg: LDO4 { - regulator-name = "VDDQ_MMC2_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; +&g2d { + status = "okay"; +}; - ldo5_reg: LDO5 { - regulator-name = "VDDQ_MMC1_3_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; +&hdmi { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + ddc = <&i2c_2>; + status = "okay"; +}; - ldo6_reg: LDO6 { - regulator-name = "VDD10_MPLL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; +&hsotg { + dr_mode = "peripheral"; + status = "okay"; + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; +}; - ldo7_reg: LDO7 { - regulator-name = "VDD10_XPLL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; +&i2c_0 { + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + status = "okay"; + + usb3503: usb3503@08 { + compatible = "smsc,usb3503"; + reg = <0x08>; + + intn-gpios = <&gpx3 0 0>; + connect-gpios = <&gpx3 4 0>; + reset-gpios = <&gpx3 5 0>; + initial-mode = <1>; + }; - ldo8_reg: ldo@8 { - regulator-compatible = "LDO8"; - regulator-name = "VDD10_HDMI_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; + max77686: pmic@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - ldo10_reg: ldo@10 { - regulator-compatible = "LDO10"; - regulator-name = "VDDQ_MIPIHSI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M1_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - ldo11_reg: LDO11 { - regulator-name = "VDD18_ABB1_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + ldo3_reg: LDO3 { + regulator-name = "VDDQ_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - ldo12_reg: LDO12 { - regulator-name = "VDD33_USB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; + ldo4_reg: LDO4 { + regulator-name = "VDDQ_MMC2_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; - ldo13_reg: LDO13 { - regulator-name = "VDDQ_C2C_W_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; + ldo5_reg: LDO5 { + regulator-name = "VDDQ_MMC1_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - ldo14_reg: LDO14 { - regulator-name = "VDD18_ABB0_2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - ldo15_reg: LDO15 { - regulator-name = "VDD10_HSIC_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - ldo16_reg: LDO16 { - regulator-name = "VDD18_HSIC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; + ldo8_reg: ldo@8 { + regulator-compatible = "LDO8"; + regulator-name = "VDD10_HDMI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; - ldo20_reg: LDO20 { - regulator-name = "LDO20_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; + ldo10_reg: ldo@10 { + regulator-compatible = "LDO10"; + regulator-name = "VDDQ_MIPIHSI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - ldo21_reg: LDO21 { - regulator-name = "LDO21_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - ldo25_reg: LDO25 { - regulator-name = "VDDQ_LCD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; + ldo12_reg: LDO12 { + regulator-name = "VDD33_USB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; + ldo15_reg: LDO15 { + regulator-name = "VDD10_HSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-microvolt-offset = <50000>; - }; + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - buck5_reg: BUCK5 { - regulator-name = "VDDQ_CKEM1_2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; + ldo20_reg: LDO20 { + regulator-name = "LDO20_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; - buck6_reg: BUCK6 { - regulator-name = "BUCK6_1.35V"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; + ldo21_reg: LDO21 { + regulator-name = "LDO21_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; - buck7_reg: BUCK7 { - regulator-name = "BUCK7_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; + ldo25_reg: LDO25 { + regulator-name = "VDDQ_LCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - buck8_reg: BUCK8 { - regulator-name = "BUCK8_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; }; - }; - }; - i2c@13870000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_bus>; - status = "okay"; - max98090: max98090@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - interrupt-parent = <&gpx0>; - interrupts = <0 0>; - clocks = <&i2s0 CLK_I2S_CDCLK>; - clock-names = "mclk"; - #sound-dai-cells = <0>; - }; - }; + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; - exynos-usbphy@125B0000 { - status = "okay"; - }; + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; - hsotg@12480000 { - dr_mode = "peripheral"; - status = "okay"; - vusb_d-supply = <&ldo15_reg>; - vusb_a-supply = <&ldo12_reg>; - }; + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-microvolt-offset = <50000>; + }; - ehci: ehci@12580000 { - status = "okay"; - }; + buck5_reg: BUCK5 { + regulator-name = "VDDQ_CKEM1_2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; - tmu@100C0000 { - vtmu-supply = <&ldo10_reg>; - status = "okay"; - }; + buck6_reg: BUCK6 { + regulator-name = "BUCK6_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>; - }; - }; + buck7_reg: BUCK7 { + regulator-name = "BUCK7_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "BUCK8_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; }; }; +}; - mixer: mixer@12C10000 { - status = "okay"; +&i2c_1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + status = "okay"; + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpx0>; + interrupts = <0 0>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + clock-names = "mclk"; + #sound-dai-cells = <0>; }; +}; - hdmi@12D00000 { - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd>; - vdd-supply = <&ldo8_reg>; - vdd_osc-supply = <&ldo10_reg>; - vdd_pll-supply = <&ldo8_reg>; - ddc = <&hdmi_ddc>; - status = "okay"; - }; +&i2c_2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; +}; - hdmi_ddc: i2c@13880000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_bus>; - }; +&i2c_8 { + status = "okay"; +}; - i2c@138E0000 { - status = "okay"; - }; +&i2s0 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; }; -/* RSTN signal for eMMC */ -&sd1_cd { - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; +&mixer { + status = "okay"; }; -&pinctrl_1 { - gpio_power_key: power_key { - samsung,pins = "gpx1-3"; - samsung,pin-pud = <0>; - }; +&mshc_0 { + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + vmmc-supply = <&ldo20_reg &buck8_reg>; + mmc-pwrseq = <&emmc_pwrseq>; + status = "okay"; + + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + bus-width = <8>; + cap-mmc-highspeed; +}; - max77686_irq: max77686-irq { - samsung,pins = "gpx3-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; - hdmi_hpd: hdmi-hpd { - samsung,pins = "gpx3-7"; - samsung,pin-pud = <1>; - }; +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo4_reg &ldo21_reg>; + cd-gpios = <&gpk2 2 0>; + cd-inverted; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&tmu { + vtmu-supply = <&ldo10_reg>; + status = "okay"; +}; + +&watchdog { + status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index cb1cfe7239c4..679ac103ebf6 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -38,14 +38,6 @@ }; }; - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - gpio_keys { pinctrl-0 = <&gpio_power_key &gpio_home_key>; @@ -83,3 +75,11 @@ samsung,pin-pud = <0>; }; }; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index bd8b73077d41..84c76310b312 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -50,485 +50,485 @@ }; }; - watchdog@10060000 { - status = "okay"; - }; - - rtc@10070000 { - status = "okay"; + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <47500000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <64>; + hback-porch = <16>; + hsync-len = <48>; + vback-porch = <64>; + vfront-porch = <16>; + vsync-len = <3>; + }; }; - pinctrl@11000000 { - keypad_rows: keypad-rows { - samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; }; - keypad_cols: keypad-cols { - samsung,pins = "gpx1-0", "gpx1-1"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; }; }; +}; - keypad@100A0000 { - samsung,keypad-num-rows = <3>; - samsung,keypad-num-columns = <2>; - linux,keypad-no-autorepeat; - linux,keypad-wakeup; - pinctrl-0 = <&keypad_rows &keypad_cols>; - pinctrl-names = "default"; - status = "okay"; - - key_home { - keypad,row = <0>; - keypad,column = <0>; - linux,code = <KEY_HOME>; - }; +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; +}; - key_down { - keypad,row = <0>; - keypad,column = <1>; - linux,code = <KEY_DOWN>; - }; +&g2d { + status = "okay"; +}; - key_up { - keypad,row = <1>; - keypad,column = <0>; - linux,code = <KEY_UP>; - }; +&i2c_0 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck-default-dvs-idx = <3>; + + s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>, + <&gpx2 4 0>, + <&gpx2 5 0>; + + s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>, + <&gpm3 6 0>, + <&gpm3 7 0>; + + s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; - key_menu { - keypad,row = <1>; - keypad,column = <1>; - linux,code = <KEY_MENU>; - }; + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; - key_back { - keypad,row = <2>; - keypad,column = <0>; - linux,code = <KEY_BACK>; - }; + ldo3_reg: LDO3 { + regulator-name = "VDDIOAP_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo4_reg: LDO4 { + regulator-name = "VDDQ_PRE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD18_2M"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD10_MIPI"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD33_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD18_MIPI"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD33_UOTG"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDIOPERI_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB02"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_USH"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo17_reg: LDO17 { + regulator-name = "VDDIOAP_MMC012_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo18_reg: LDO18 { + regulator-name = "VDDIOPERI_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo19_reg: LDO19 { + regulator-name = "DVDD25"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo20_reg: LDO20 { + regulator-name = "VDD28_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD28_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo22_reg: LDO22 { + regulator-name = "VDDA28_2M"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; - key_enter { - keypad,row = <2>; - keypad,column = <1>; - linux,code = <KEY_ENTER>; + ldo23_reg: LDO23 { + regulator-name = "VDD28_TF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo24_reg: LDO24 { + regulator-name = "VDD33_A31"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo25_reg: LDO25 { + regulator-name = "VDD18_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo26_reg: LDO26 { + regulator-name = "VDD18_A31"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo27_reg: LDO27 { + regulator-name = "GPS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo28_reg: LDO28 { + regulator-name = "DVDD12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_m12"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd12_5m"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck9_reg: BUCK9 { + regulator-name = "vddf28_emmc"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; }; }; +}; - g2d@10800000 { - status = "okay"; +&keypad { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <2>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; + status = "okay"; + + key_home { + keypad,row = <0>; + keypad,column = <0>; + linux,code = <KEY_HOME>; }; - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; - pinctrl-names = "default"; - vmmc-supply = <&mmc_reg>; - status = "okay"; + key_down { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <KEY_DOWN>; }; - mmc@12550000 { - pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; - pinctrl-names = "default"; - status = "okay"; - - num-slots = <1>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - bus-width = <8>; - cap-mmc-highspeed; + key_up { + keypad,row = <1>; + keypad,column = <0>; + linux,code = <KEY_UP>; }; - codec@13400000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; + key_menu { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <KEY_MENU>; }; - fimd@11c00000 { - pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; - pinctrl-names = "default"; - status = "okay"; + key_back { + keypad,row = <2>; + keypad,column = <0>; + linux,code = <KEY_BACK>; }; - display-timings { - native-mode = <&timing0>; - timing0: timing { - clock-frequency = <47500000>; - hactive = <1024>; - vactive = <600>; - hfront-porch = <64>; - hback-porch = <16>; - hsync-len = <48>; - vback-porch = <64>; - vfront-porch = <16>; - vsync-len = <3>; - }; + key_enter { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <KEY_ENTER>; }; +}; - serial@13800000 { - status = "okay"; - }; +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; +}; - serial@13810000 { - status = "okay"; - }; +&mshc_0 { + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + status = "okay"; + + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + bus-width = <8>; + cap-mmc-highspeed; +}; - serial@13820000 { - status = "okay"; +&pinctrl_1 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; }; - serial@13830000 { - status = "okay"; + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; +}; - i2c@13860000 { - #address-cells = <1>; - #size-cells = <0>; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; - status = "okay"; - - s5m8767_pmic@66 { - compatible = "samsung,s5m8767-pmic"; - reg = <0x66>; - - s5m8767,pmic-buck-default-dvs-idx = <3>; - - s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>, - <&gpx2 4 0>, - <&gpx2 5 0>; - - s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>, - <&gpm3 6 0>, - <&gpm3 7 0>; - - s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; - - s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, - <1100000>, <1100000>, - <1100000>, <1100000>, - <1100000>, <1100000>; - - s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_M12"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo3_reg: LDO3 { - regulator-name = "VDDIOAP_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo4_reg: LDO4 { - regulator-name = "VDDQ_PRE"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo5_reg: LDO5 { - regulator-name = "VDD18_2M"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD10_MPLL"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD10_XPLL"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo8_reg: LDO8 { - regulator-name = "VDD10_MIPI"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo9_reg: LDO9 { - regulator-name = "VDD33_LCD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD18_MIPI"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD18_ABB1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD33_UOTG"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo13_reg: LDO13 { - regulator-name = "VDDIOPERI_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo14_reg: LDO14 { - regulator-name = "VDD18_ABB02"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo15_reg: LDO15 { - regulator-name = "VDD10_USH"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo16_reg: LDO16 { - regulator-name = "VDD18_HSIC"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo17_reg: LDO17 { - regulator-name = "VDDIOAP_MMC012_28"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo18_reg: LDO18 { - regulator-name = "VDDIOPERI_28"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo19_reg: LDO19 { - regulator-name = "DVDD25"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo20_reg: LDO20 { - regulator-name = "VDD28_CAM"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo21_reg: LDO21 { - regulator-name = "VDD28_AF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo22_reg: LDO22 { - regulator-name = "VDDA28_2M"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo23_reg: LDO23 { - regulator-name = "VDD28_TF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo24_reg: LDO24 { - regulator-name = "VDD33_A31"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo25_reg: LDO25 { - regulator-name = "VDD18_CAM"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo26_reg: LDO26 { - regulator-name = "VDD18_A31"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo27_reg: LDO27 { - regulator-name = "GPS_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo28_reg: LDO28 { - regulator-name = "DVDD12"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck5_reg: BUCK5 { - regulator-name = "vdd_m12"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck6_reg: BUCK6 { - regulator-name = "vdd12_5m"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck9_reg: BUCK9 { - regulator-name = "vddf28_emmc"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - }; - }; - }; +&rtc { + status = "okay"; +}; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <0>; - }; +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; +}; - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; - }; - }; +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&watchdog { + status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index b9256afbcc68..c2421df1fa43 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -28,135 +28,135 @@ stdout-path = &serial_1; }; - g2d@10800000 { - status = "okay"; - }; - - pinctrl@11000000 { - keypad_rows: keypad-rows { - samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; }; - keypad_cols: keypad-cols { - samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", - "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; }; }; +}; - keypad@100A0000 { - samsung,keypad-num-rows = <3>; - samsung,keypad-num-columns = <8>; - linux,keypad-no-autorepeat; - linux,keypad-wakeup; - pinctrl-0 = <&keypad_rows &keypad_cols>; - pinctrl-names = "default"; - status = "okay"; - - key_1 { - keypad,row = <1>; - keypad,column = <3>; - linux,code = <2>; - }; - - key_2 { - keypad,row = <1>; - keypad,column = <4>; - linux,code = <3>; - }; - - key_3 { - keypad,row = <1>; - keypad,column = <5>; - linux,code = <4>; - }; - - key_4 { - keypad,row = <1>; - keypad,column = <6>; - linux,code = <5>; - }; +&g2d { + status = "okay"; +}; - key_5 { - keypad,row = <1>; - keypad,column = <7>; - linux,code = <6>; - }; +&keypad { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <8>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; + status = "okay"; + + key_1 { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <2>; + }; - key_A { - keypad,row = <2>; - keypad,column = <6>; - linux,code = <30>; - }; + key_2 { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <3>; + }; - key_B { - keypad,row = <2>; - keypad,column = <7>; - linux,code = <48>; - }; + key_3 { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <4>; + }; - key_C { - keypad,row = <0>; - keypad,column = <5>; - linux,code = <46>; - }; + key_4 { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <5>; + }; - key_D { - keypad,row = <2>; - keypad,column = <5>; - linux,code = <32>; - }; + key_5 { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <6>; + }; - key_E { - keypad,row = <0>; - keypad,column = <7>; - linux,code = <18>; - }; + key_A { + keypad,row = <2>; + keypad,column = <6>; + linux,code = <30>; }; - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; - pinctrl-names = "default"; - status = "okay"; + key_B { + keypad,row = <2>; + keypad,column = <7>; + linux,code = <48>; }; - codec@13400000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; + key_C { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <46>; }; - serial@13800000 { - status = "okay"; + key_D { + keypad,row = <2>; + keypad,column = <5>; + linux,code = <32>; }; - serial@13810000 { - status = "okay"; + key_E { + keypad,row = <0>; + keypad,column = <7>; + linux,code = <18>; }; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; +}; - serial@13820000 { - status = "okay"; +&pinctrl_1 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; }; - serial@13830000 { - status = "okay"; + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", + "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; +}; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <0>; - }; +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + status = "okay"; +}; - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; - }; - }; +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index d46fd4c2aeaa..525684ca8dc0 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -56,33 +56,6 @@ }; }; - rtc@10070000 { - status = "okay"; - }; - - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -95,3 +68,30 @@ }; }; }; + +&rtc { + status = "okay"; +}; + +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 792394dd0f2a..afc199d78cb9 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -16,6 +16,7 @@ #include "exynos4412.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/maxim,max77686.h> / { model = "Samsung Trats 2 based on Exynos4412"; @@ -130,411 +131,6 @@ }; }; - adc: adc@126C0000 { - vdd-supply = <&ldo3_reg>; - status = "okay"; - }; - - i2c@13890000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <400000>; - pinctrl-0 = <&i2c3_bus>; - pinctrl-names = "default"; - status = "okay"; - - mms114-touchscreen@48 { - compatible = "melfas,mms114"; - reg = <0x48>; - interrupt-parent = <&gpm2>; - interrupts = <3 2>; - x-size = <720>; - y-size = <1280>; - avdd-supply = <&ldo23_reg>; - vdd-supply = <&ldo24_reg>; - }; - }; - - i2c_0: i2c@13860000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <400000>; - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; - status = "okay"; - - s5c73m3@3c { - compatible = "samsung,s5c73m3"; - reg = <0x3c>; - standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ - xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ - vdd-int-supply = <&buck9_reg>; - vddio-cis-supply = <&ldo9_reg>; - vdda-supply = <&ldo17_reg>; - vddio-host-supply = <&ldo18_reg>; - vdd-af-supply = <&cam_af_reg>; - vdd-reg-supply = <&cam_io_reg>; - clock-frequency = <24000000>; - /* CAM_A_CLKOUT */ - clocks = <&camera 0>; - clock-names = "cis_extclk"; - port { - s5c73m3_ep: endpoint { - remote-endpoint = <&csis0_ep>; - data-lanes = <1 2 3 4>; - }; - }; - }; - }; - - i2c@138A0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c4_bus>; - pinctrl-names = "default"; - status = "okay"; - - wm1811: wm1811@1a { - compatible = "wlf,wm1811"; - reg = <0x1a>; - clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; - DCVDD-supply = <&ldo3_reg>; - DBVDD1-supply = <&ldo3_reg>; - wlf,ldo1ena = <&gpj0 4 0>; - }; - }; - - i2c@138D0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c7_bus>; - pinctrl-names = "default"; - status = "okay"; - - max77686_pmic@09 { - compatible = "maxim,max77686"; - interrupt-parent = <&gpx0>; - interrupts = <7 0>; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: ldo1 { - regulator-compatible = "LDO1"; - regulator-name = "VALIVE_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: ldo2 { - regulator-compatible = "LDO2"; - regulator-name = "VM1M2_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo3_reg: ldo3 { - regulator-compatible = "LDO3"; - regulator-name = "VCC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: ldo4 { - regulator-compatible = "LDO4"; - regulator-name = "VCC_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo5_reg: ldo5 { - regulator-compatible = "LDO5"; - regulator-name = "VCC_1.8V_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: ldo6 { - regulator-compatible = "LDO6"; - regulator-name = "VMPLL_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo7_reg: ldo7 { - regulator-compatible = "LDO7"; - regulator-name = "VPLL_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo8_reg: ldo8 { - regulator-compatible = "LDO8"; - regulator-name = "VMIPI_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo9_reg: ldo9 { - regulator-compatible = "LDO9"; - regulator-name = "CAM_ISP_MIPI_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo10_reg: ldo10 { - regulator-compatible = "LDO10"; - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo11_reg: ldo11 { - regulator-compatible = "LDO11"; - regulator-name = "VABB1_1.95V"; - regulator-min-microvolt = <1950000>; - regulator-max-microvolt = <1950000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo12_reg: ldo12 { - regulator-compatible = "LDO12"; - regulator-name = "VUOTG_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo13_reg: ldo13 { - regulator-compatible = "LDO13"; - regulator-name = "NFC_AVDD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo14_reg: ldo14 { - regulator-compatible = "LDO14"; - regulator-name = "VABB2_1.95V"; - regulator-min-microvolt = <1950000>; - regulator-max-microvolt = <1950000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo15_reg: ldo15 { - regulator-compatible = "LDO15"; - regulator-name = "VHSIC_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo16_reg: ldo16 { - regulator-compatible = "LDO16"; - regulator-name = "VHSIC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo17_reg: ldo17 { - regulator-compatible = "LDO17"; - regulator-name = "CAM_SENSOR_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo18_reg: ldo18 { - regulator-compatible = "LDO18"; - regulator-name = "CAM_ISP_SEN_IO_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: ldo19 { - regulator-compatible = "LDO19"; - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo20_reg: ldo20 { - regulator-compatible = "LDO20"; - regulator-name = "VDDQ_PRE_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo21_reg: ldo21 { - regulator-compatible = "LDO21"; - regulator-name = "VTF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; - }; - - ldo22_reg: ldo22 { - regulator-compatible = "LDO22"; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; - }; - - ldo23_reg: ldo23 { - regulator-compatible = "LDO23"; - regulator-name = "TSP_AVDD_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo24_reg: ldo24 { - regulator-compatible = "LDO24"; - regulator-name = "TSP_VDD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo25_reg: ldo25 { - regulator-compatible = "LDO25"; - regulator-name = "LCD_VCC_3.3V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo26_reg: ldo26 { - regulator-compatible = "LDO26"; - regulator-name = "MOTOR_VCC_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - buck1_reg: buck1 { - regulator-compatible = "BUCK1"; - regulator-name = "vdd_mif"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck2_reg: buck2 { - regulator-compatible = "BUCK2"; - regulator-name = "vdd_arm"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - buck3_reg: buck3 { - regulator-compatible = "BUCK3"; - regulator-name = "vdd_int"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck4_reg: buck4 { - regulator-compatible = "BUCK4"; - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck5_reg: buck5 { - regulator-compatible = "BUCK5"; - regulator-name = "VMEM_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck6_reg: buck6 { - regulator-compatible = "BUCK6"; - regulator-name = "VCC_SUB_1.35V"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - buck7_reg: buck7 { - regulator-compatible = "BUCK7"; - regulator-name = "VCC_SUB_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck8_reg: buck8 { - regulator-compatible = "BUCK8"; - regulator-name = "VMEM_VDDF_3.0V"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; - }; - - buck9_reg: buck9 { - regulator-compatible = "BUCK9"; - regulator-name = "CAM_ISP_CORE_1.2V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1200000>; - maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; - }; - }; - }; - }; - i2c_max77693: i2c-gpio-1 { compatible = "i2c-gpio"; gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; @@ -597,54 +193,6 @@ }; }; - mmc@12550000 { - num-slots = <1>; - broken-cd; - non-removable; - card-detect-delay = <200>; - vmmc-supply = <&ldo22_reg>; - clock-frequency = <400000000>; - samsung,dw-mshc-ciu-div = <0>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; - pinctrl-names = "default"; - status = "okay"; - bus-width = <8>; - cap-mmc-highspeed; - }; - - sdhci@12530000 { - bus-width = <4>; - cd-gpios = <&gpx3 4 0>; - cd-inverted; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&ldo21_reg>; - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - - tmu@100C0000 { - vtmu-supply = <&ldo10_reg>; - status = "okay"; - }; - i2c_ak8975: i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&gpy2 4 0>, <&gpy2 5 0>; @@ -676,90 +224,6 @@ }; }; - spi_1: spi@13930000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_bus>; - cs-gpios = <&gpb 5 0>; - status = "okay"; - - s5c73m3_spi: s5c73m3 { - compatible = "samsung,s5c73m3"; - spi-max-frequency = <50000000>; - reg = <0>; - controller-data { - samsung,spi-feedback-delay = <2>; - }; - }; - }; - - pwm: pwm@139D0000 { - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; - samsung,pwm-outputs = <0>; - status = "okay"; - }; - - dsi_0: dsi@11C80000 { - vddcore-supply = <&ldo8_reg>; - vddio-supply = <&ldo10_reg>; - samsung,pll-clock-frequency = <24000000>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - remote-endpoint = <&dsi_in>; - samsung,burst-clock-frequency = <500000000>; - samsung,esc-clock-frequency = <20000000>; - }; - }; - }; - - panel@0 { - compatible = "samsung,s6e8aa0"; - reg = <0>; - vdd3-supply = <&lcd_vdd3_reg>; - vci-supply = <&ldo25_reg>; - reset-gpios = <&gpy4 5 0>; - power-on-delay= <50>; - reset-delay = <100>; - init-delay = <100>; - flip-horizontal; - flip-vertical; - panel-width-mm = <58>; - panel-height-mm = <103>; - - display-timings { - timing-0 { - clock-frequency = <57153600>; - hactive = <720>; - vactive = <1280>; - hfront-porch = <5>; - hback-porch = <5>; - hsync-len = <5>; - vfront-porch = <13>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; - - port { - dsi_in: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; - }; - }; - - fimd@11c00000 { - status = "okay"; - }; - camera: camera { pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; @@ -769,124 +233,7 @@ assigned-clock-parents = <&clock CLK_XUSBXTI>, <&clock CLK_XUSBXTI>; - fimc_0: fimc@11800000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC0>, - <&clock CLK_SCLK_FIMC0>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - }; - - fimc_1: fimc@11810000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC1>, - <&clock CLK_SCLK_FIMC1>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - }; - - fimc_2: fimc@11820000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC2>, - <&clock CLK_SCLK_FIMC2>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - }; - - fimc_3: fimc@11830000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC3>, - <&clock CLK_SCLK_FIMC3>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - }; - - csis_0: csis@11880000 { - status = "okay"; - vddcore-supply = <&ldo8_reg>; - vddio-supply = <&ldo10_reg>; - assigned-clocks = <&clock CLK_MOUT_CSIS0>, - <&clock CLK_SCLK_CSIS0>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - - /* Camera C (3) MIPI CSI-2 (CSIS0) */ - port@3 { - reg = <3>; - csis0_ep: endpoint { - remote-endpoint = <&s5c73m3_ep>; - data-lanes = <1 2 3 4>; - samsung,csis-hs-settle = <12>; - }; - }; - }; - - csis_1: csis@11890000 { - status = "okay"; - vddcore-supply = <&ldo8_reg>; - vddio-supply = <&ldo10_reg>; - assigned-clocks = <&clock CLK_MOUT_CSIS1>, - <&clock CLK_SCLK_CSIS1>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - - /* Camera D (4) MIPI CSI-2 (CSIS1) */ - port@4 { - reg = <4>; - csis1_ep: endpoint { - remote-endpoint = <&is_s5k6a3_ep>; - data-lanes = <1>; - samsung,csis-hs-settle = <18>; - samsung,csis-wclk; - }; - }; - }; - - fimc_lite_0: fimc-lite@12390000 { - status = "okay"; - }; - - fimc_lite_1: fimc-lite@123A0000 { - status = "okay"; - }; - fimc-is@12000000 { - pinctrl-0 = <&fimc_is_uart>; - pinctrl-names = "default"; - status = "okay"; - - i2c1_isp: i2c-isp@12140000 { - pinctrl-0 = <&fimc_is_i2c1>; - pinctrl-names = "default"; - - s5k6a3@10 { - compatible = "samsung,s5k6a3"; - reg = <0x10>; - svdda-supply = <&cam_io_reg>; - svddio-supply = <&ldo19_reg>; - afvdd-supply = <&ldo19_reg>; - clock-frequency = <24000000>; - /* CAM_B_CLKOUT */ - clocks = <&camera 1>; - clock-names = "extclk"; - samsung,camclk-out = <1>; - gpios = <&gpm1 6 0>; - - port { - is_s5k6a3_ep: endpoint { - remote-endpoint = <&csis1_ep>; - data-lanes = <1>; - }; - }; - }; - }; - }; - }; - - i2s0: i2s@03830000 { - pinctrl-0 = <&i2s0_bus>; - pinctrl-names = "default"; - status = "okay"; }; sound { @@ -901,17 +248,6 @@ "SPK", "SPKOUTRP"; }; - exynos-usbphy@125B0000 { - status = "okay"; - }; - - hsotg@12480000 { - vusb_d-supply = <&ldo15_reg>; - vusb_a-supply = <&ldo12_reg>; - dr_mode = "peripheral"; - status = "okay"; - }; - thermistor-ap@0 { compatible = "ntc,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ @@ -944,6 +280,619 @@ }; }; +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; +}; + +&csis_0 { + status = "okay"; + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + assigned-clocks = <&clock CLK_MOUT_CSIS0>, + <&clock CLK_SCLK_CSIS0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + + /* Camera C (3) MIPI CSI-2 (CSIS0) */ + port@3 { + reg = <3>; + csis0_ep: endpoint { + remote-endpoint = <&s5c73m3_ep>; + data-lanes = <1 2 3 4>; + samsung,csis-hs-settle = <12>; + }; + }; +}; + +&csis_1 { + status = "okay"; + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + assigned-clocks = <&clock CLK_MOUT_CSIS1>, + <&clock CLK_SCLK_CSIS1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + + /* Camera D (4) MIPI CSI-2 (CSIS1) */ + port@4 { + reg = <4>; + csis1_ep: endpoint { + remote-endpoint = <&is_s5k6a3_ep>; + data-lanes = <1>; + samsung,csis-hs-settle = <18>; + samsung,csis-wclk; + }; + }; +}; + +&dsi_0 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&dsi_in>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + }; + }; + }; + + panel@0 { + compatible = "samsung,s6e8aa0"; + reg = <0>; + vdd3-supply = <&lcd_vdd3_reg>; + vci-supply = <&ldo25_reg>; + reset-gpios = <&gpy4 5 0>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <58>; + panel-height-mm = <103>; + + display-timings { + timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + + port { + dsi_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&exynos_usbphy { + status = "okay"; +}; + +&fimc_0 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_1 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC1>, + <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_2 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC2>, + <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_3 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC3>, + <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_is { + pinctrl-0 = <&fimc_is_uart>; + pinctrl-names = "default"; + status = "okay"; + + i2c1_isp: i2c-isp@12140000 { + pinctrl-0 = <&fimc_is_i2c1>; + pinctrl-names = "default"; + + s5k6a3@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + svdda-supply = <&cam_io_reg>; + svddio-supply = <&ldo19_reg>; + afvdd-supply = <&ldo19_reg>; + clock-frequency = <24000000>; + /* CAM_B_CLKOUT */ + clocks = <&camera 1>; + clock-names = "extclk"; + samsung,camclk-out = <1>; + gpios = <&gpm1 6 0>; + + port { + is_s5k6a3_ep: endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; +}; + +&fimc_lite_0 { + status = "okay"; +}; + +&fimc_lite_1 { + status = "okay"; +}; + +&fimd { + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c_0 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5c73m3@3c { + compatible = "samsung,s5c73m3"; + reg = <0x3c>; + standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ + xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ + vdd-int-supply = <&buck9_reg>; + vddio-cis-supply = <&ldo9_reg>; + vdda-supply = <&ldo17_reg>; + vddio-host-supply = <&ldo18_reg>; + vdd-af-supply = <&cam_af_reg>; + vdd-reg-supply = <&cam_io_reg>; + clock-frequency = <24000000>; + /* CAM_A_CLKOUT */ + clocks = <&camera 0>; + clock-names = "cis_extclk"; + port { + s5c73m3_ep: endpoint { + remote-endpoint = <&csis0_ep>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpm2>; + interrupts = <3 2>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&ldo23_reg>; + vdd-supply = <&ldo24_reg>; + }; +}; + +&i2c_4 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c4_bus>; + pinctrl-names = "default"; + status = "okay"; + + wm1811: wm1811@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + clocks = <&pmu_system_controller 0>; + clock-names = "MCLK1"; + DCVDD-supply = <&ldo3_reg>; + DBVDD1-supply = <&ldo3_reg>; + wlf,ldo1ena = <&gpj0 4 0>; + }; +}; + +&i2c_7 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + status = "okay"; + + max77686: max77686_pmic@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx0>; + interrupts = <7 0>; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "VALIVE_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "VM1M2_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo3_reg: ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "VCC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-compatible = "LDO4"; + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "VCC_1.8V_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "VMPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo7_reg: ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "VPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo8_reg: ldo8 { + regulator-compatible = "LDO8"; + regulator-name = "VMIPI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: ldo9 { + regulator-compatible = "LDO9"; + regulator-name = "CAM_ISP_MIPI_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo10_reg: ldo10 { + regulator-compatible = "LDO10"; + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo11_reg: ldo11 { + regulator-compatible = "LDO11"; + regulator-name = "VABB1_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: ldo12 { + regulator-compatible = "LDO12"; + regulator-name = "VUOTG_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo13_reg: ldo13 { + regulator-compatible = "LDO13"; + regulator-name = "NFC_AVDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo14_reg: ldo14 { + regulator-compatible = "LDO14"; + regulator-name = "VABB2_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: ldo15 { + regulator-compatible = "LDO15"; + regulator-name = "VHSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo16_reg: ldo16 { + regulator-compatible = "LDO16"; + regulator-name = "VHSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo17_reg: ldo17 { + regulator-compatible = "LDO17"; + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo18_reg: ldo18 { + regulator-compatible = "LDO18"; + regulator-name = "CAM_ISP_SEN_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: ldo19 { + regulator-compatible = "LDO19"; + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: ldo20 { + regulator-compatible = "LDO20"; + regulator-name = "VDDQ_PRE_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: ldo21 { + regulator-compatible = "LDO21"; + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; + }; + + ldo22_reg: ldo22 { + regulator-compatible = "LDO22"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + ldo23_reg: ldo23 { + regulator-compatible = "LDO23"; + regulator-name = "TSP_AVDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo24_reg: ldo24 { + regulator-compatible = "LDO24"; + regulator-name = "TSP_VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo25_reg: ldo25 { + regulator-compatible = "LDO25"; + regulator-name = "LCD_VCC_3.3V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo26_reg: ldo26 { + regulator-compatible = "LDO26"; + regulator-name = "MOTOR_VCC_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + buck1_reg: buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "vdd_mif"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck2_reg: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + buck3_reg: buck3 { + regulator-compatible = "BUCK3"; + regulator-name = "vdd_int"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck4_reg: buck4 { + regulator-compatible = "BUCK4"; + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck5_reg: buck5 { + regulator-compatible = "BUCK5"; + regulator-name = "VMEM_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck6_reg: buck6 { + regulator-compatible = "BUCK6"; + regulator-name = "VCC_SUB_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: buck7 { + regulator-compatible = "BUCK7"; + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: buck8 { + regulator-compatible = "BUCK8"; + regulator-name = "VMEM_VDDF_3.0V"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + buck9_reg: buck9 { + regulator-compatible = "BUCK9"; + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; + }; + }; + }; +}; + +&i2s0 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mshc_0 { + num-slots = <1>; + broken-cd; + non-removable; + card-detect-delay = <200>; + vmmc-supply = <&ldo22_reg>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <0>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + status = "okay"; + bus-width = <8>; + cap-mmc-highspeed; +}; + &pmu_system_controller { assigned-clocks = <&pmu_system_controller 0>; assigned-clock-parents = <&clock CLK_XUSBXTI>; @@ -1304,3 +1253,63 @@ PIN_SLP(gpv4-0, INPUT, DOWN); }; }; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; + status = "okay"; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&sdhci_2 { + bus-width = <4>; + cd-gpios = <&gpx3 4 0>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo21_reg>; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&spi_1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + cs-gpios = <&gpb 5 0>; + status = "okay"; + + s5c73m3_spi: s5c73m3 { + compatible = "samsung,s5c73m3"; + spi-max-frequency = <50000000>; + reg = <0>; + controller-data { + samsung,spi-feedback-delay = <2>; + }; + }; +}; + +&tmu { + vtmu-supply = <&ldo10_reg>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 68ad43b391ae..b78ada70bd05 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -54,19 +54,19 @@ }; }; - combiner: interrupt-controller@10440000 { - samsung,combiner-nr = <20>; - }; - pmu { interrupts = <2 2>, <3 2>, <18 2>, <19 2>; }; +}; - gic: interrupt-controller@10490000 { - cpu-offset = <0x4000>; - }; +&pmu_system_controller { + compatible = "samsung,exynos4412-pmu", "syscon"; +}; - pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos4412-pmu", "syscon"; - }; +&combiner { + samsung,combiner-nr = <20>; +}; + +&gic { + cpu-offset = <0x4000>; }; diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi index 5caea996e090..ad764842fff5 100644 --- a/arch/arm/boot/dts/exynos4415.dtsi +++ b/arch/arm/boot/dts/exynos4415.dtsi @@ -124,8 +124,8 @@ mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; - reg = <0x10020710 8>; #phy-cells = <1>; + syscon = <&pmu_system_controller>; }; pd_cam: cam-power-domain@10024000 { @@ -177,7 +177,7 @@ }; rtc: rtc@10070000 { - compatible = "samsung,exynos3250-rtc"; + compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupts = <0 73 0>, <0 74 0>; status = "disabled"; @@ -249,6 +249,7 @@ clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; samsung,power-domain = <&pd_lcd0>; + iommus = <&sysmmu_fimd0>; samsung,sysreg = <&sysreg_system_controller>; status = "disabled"; }; @@ -268,6 +269,16 @@ status = "disabled"; }; + sysmmu_fimd0: sysmmu@11E20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11e20000 0x1000>; + interrupts = <0 80 0>, <0 81 0>; + clock-names = "sysmmu", "master"; + clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>; + power-domains = <&pd_lcd0>; + #iommu-cells = <0>; + }; + hsotg: hsotg@12480000 { compatible = "samsung,s3c6400-hsotg"; reg = <0x12480000 0x20000>; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index c141931378e7..bac25c672789 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -29,7 +29,7 @@ } / { - pinctrl@11400000 { + pinctrl_0: pinctrl@11400000 { gpa0: gpa0 { gpio-controller; #gpio-cells = <2>; @@ -441,7 +441,7 @@ }; }; - pinctrl@11000000 { + pinctrl_1: pinctrl@11000000 { gpk0: gpk0 { gpio-controller; #gpio-cells = <2>; @@ -887,7 +887,7 @@ }; }; - pinctrl@03860000 { + pinctrl_2: pinctrl@03860000 { gpz: gpz { gpio-controller; #gpio-cells = <2>; @@ -913,7 +913,7 @@ }; }; - pinctrl@106E0000 { + pinctrl_3: pinctrl@106E0000 { gpv0: gpv0 { gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 6a6abe14fd9b..b77dac61ffb5 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -96,32 +96,6 @@ }; }; - combiner: interrupt-controller@10440000 { - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>; - }; - - pinctrl_0: pinctrl@11400000 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <0 47 0>; - }; - - pinctrl_1: pinctrl@11000000 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11000000 0x1000>; - interrupts = <0 46 0>; - - wakup_eint: wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <0 32 0>; - }; - }; - adc: adc@126C0000 { compatible = "samsung,exynos-adc-v1"; reg = <0x126C0000 0x100>; @@ -135,36 +109,13 @@ status = "disabled"; }; - pinctrl_2: pinctrl@03860000 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x03860000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <10 0>; - }; - - pinctrl_3: pinctrl@106E0000 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x106E0000 0x1000>; - interrupts = <0 72 0>; - }; - - pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos4212-pmu", "syscon"; - clock-names = "clkout0", "clkout1", "clkout2", "clkout3", - "clkout4", "clkout8", "clkout9"; - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, - <&clock CLK_XUSBXTI>; - #clock-cells = <1>; - }; - - g2d@10800000 { + g2d: g2d@10800000 { compatible = "samsung,exynos4212-g2d"; reg = <0x10800000 0x1000>; interrupts = <0 89 0>; clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; clock-names = "sclk_fimg2d", "fimg2d"; + iommus = <&sysmmu_g2d>; status = "disabled"; }; @@ -173,40 +124,7 @@ <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; - fimc_0: fimc@11800000 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,cam-if; - }; - - fimc_1: fimc@11810000 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,cam-if; - }; - - fimc_2: fimc@11820000 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,lcd-wb; - samsung,cam-if; - }; - - fimc_3: fimc@11830000 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <1920 8192 1366 1920>; - samsung,rotators = <0>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,lcd-wb; - }; - + /* fimc_[0-3] are configured outside, under phandles */ fimc_lite_0: fimc-lite@12390000 { compatible = "samsung,exynos4212-fimc-lite"; reg = <0x12390000 0x1000>; @@ -214,6 +132,7 @@ power-domains = <&pd_isp>; clocks = <&clock CLK_FIMC_LITE0>; clock-names = "flite"; + iommus = <&sysmmu_fimc_lite0>; status = "disabled"; }; @@ -224,6 +143,7 @@ power-domains = <&pd_isp>; clocks = <&clock CLK_FIMC_LITE1>; clock-names = "flite"; + iommus = <&sysmmu_fimc_lite1>; status = "disabled"; }; @@ -252,6 +172,9 @@ "mcuispdiv1", "uart", "aclk200", "div_aclk200", "aclk400mcuisp", "div_aclk400mcuisp"; + iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, + <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; + iommu-names = "isp", "drc", "fd", "mcuctl"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -284,29 +207,192 @@ status = "disabled"; }; - exynos-usbphy@125B0000 { - compatible = "samsung,exynos4x12-usb2-phy"; - samsung,sysreg-phandle = <&sys_reg>; + sysmmu_g2d: sysmmu@10A40000{ + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 7>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; }; - tmu@100C0000 { - compatible = "samsung,exynos4412-tmu"; + sysmmu_fimc_isp: sysmmu@12260000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12260000 0x1000>; interrupt-parent = <&combiner>; - interrupts = <2 4>; - reg = <0x100C0000 0x100>; - clocks = <&clock 383>; - clock-names = "tmu_apbif"; - status = "disabled"; + interrupts = <16 2>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_ISP>; + #iommu-cells = <0>; }; - hdmi: hdmi@12D00000 { - compatible = "samsung,exynos4212-hdmi"; + sysmmu_fimc_drc: sysmmu@12270000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12270000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 3>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_DRC>; + #iommu-cells = <0>; }; - mixer: mixer@12C10000 { - compatible = "samsung,exynos4212-mixer"; - clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; - clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, - <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; + sysmmu_fimc_fd: sysmmu@122A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122A0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 4>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FD>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_mcuctl: sysmmu@122B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 5>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_ISPCX>; + #iommu-cells = <0>; }; + + sysmmu_fimc_lite0: sysmmu@123B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 0>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite1: sysmmu@123C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 1>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>; + #iommu-cells = <0>; + }; +}; + +&combiner { + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>; +}; + +&exynos_usbphy { + compatible = "samsung,exynos4x12-usb2-phy"; + samsung,sysreg-phandle = <&sys_reg>; +}; + +&fimc_0 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; +}; + +&fimc_1 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; +}; + +&fimc_2 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; + samsung,cam-if; +}; + +&fimc_3 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <1920 8192 1366 1920>; + samsung,rotators = <0>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; +}; + +&hdmi { + compatible = "samsung,exynos4212-hdmi"; +}; + +&jpeg_codec { + compatible = "samsung,exynos4212-jpeg"; +}; + +&mixer { + compatible = "samsung,exynos4212-mixer"; + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; +}; + +&pinctrl_0 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; +}; + +&pinctrl_1 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <0 46 0>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; +}; + +&pinctrl_2 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x03860000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 0>; +}; + +&pinctrl_3 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x106E0000 0x1000>; + interrupts = <0 72 0>; +}; + +&pmu_system_controller { + compatible = "samsung,exynos4212-pmu", "syscon"; + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; + #clock-cells = <1>; +}; + +&tmu { + compatible = "samsung,exynos4412-tmu"; + interrupt-parent = <&combiner>; + interrupts = <2 4>; + reg = <0x100C0000 0x100>; + clocks = <&clock 383>; + clock-names = "tmu_apbif"; + status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index a0cc0b6f8f96..110dbd4fb884 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -81,14 +81,14 @@ interrupts = <0 54 0>; }; - rtc@101E0000 { + rtc: rtc@101E0000 { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; interrupts = <0 43 0>, <0 44 0>; status = "disabled"; }; - fimd@14400000 { + fimd: fimd@14400000 { compatible = "samsung,exynos5250-fimd"; interrupt-parent = <&combiner>; reg = <0x14400000 0x40000>; @@ -98,7 +98,7 @@ status = "disabled"; }; - dp-controller@145B0000 { + dp: dp-controller@145B0000 { compatible = "samsung,exynos5-dp"; reg = <0x145B0000 0x1000>; interrupts = <10 3>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index bc27cc2558fe..4fe186d01f8a 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -131,6 +131,9 @@ reg = <0x09>; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; voltage-regulators { ldo1_reg: LDO1 { @@ -410,3 +413,12 @@ }; }; }; + +&pinctrl_0 { + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 1eca97ee4bd6..b7f4122df456 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -177,30 +177,6 @@ }; }; - i2c@12CD0000 { - ptn3460: lvds-bridge@20 { - compatible = "nxp,ptn3460"; - reg = <0x20>; - powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; - edid-emulation = <5>; - - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - - port@1 { - bridge_in: endpoint { - remote-endpoint = <&dp_out>; - }; - }; - }; - }; - }; - sound { compatible = "google,snow-audio-max98095"; @@ -507,6 +483,28 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + ptn3460: lvds-bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; + edid-emulation = <5>; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; + max98095: codec@11 { compatible = "maxim,max98095"; reg = <0x11>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 257e2f10525d..bf9bee67c416 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -230,6 +230,7 @@ interrupts = <0 91 0>; clocks = <&clock CLK_G2D>; clock-names = "fimg2d"; + iommus = <&sysmmu_g2d>; }; mfc: codec@11000000 { @@ -239,13 +240,8 @@ power-domains = <&pd_mfc>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; - }; - - rtc: rtc@101E0000 { - clocks = <&clock CLK_RTC>; - clock-names = "rtc"; - interrupt-parent = <&pmu_system_controller>; - status = "disabled"; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; }; tmu: tmu@10060000 { @@ -276,26 +272,6 @@ }; }; - serial@12C00000 { - clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - }; - - serial@12C10000 { - clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; - clock-names = "uart", "clk_uart_baud0"; - }; - - serial@12C20000 { - clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; - clock-names = "uart", "clk_uart_baud0"; - }; - - serial@12C30000 { - clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; - clock-names = "uart", "clk_uart_baud0"; - }; - sata: sata@122F0000 { compatible = "snps,dwc-ahci"; samsung,sata-freq = <66>; @@ -720,6 +696,7 @@ power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; + iommu = <&sysmmu_gsc0>; }; gsc_1: gsc@13e10000 { @@ -729,6 +706,7 @@ power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; + iommu = <&sysmmu_gsc1>; }; gsc_2: gsc@13e20000 { @@ -738,6 +716,7 @@ power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL2>; clock-names = "gscl"; + iommu = <&sysmmu_gsc2>; }; gsc_3: gsc@13e30000 { @@ -747,6 +726,7 @@ power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL3>; clock-names = "gscl"; + iommu = <&sysmmu_gsc3>; }; hdmi: hdmi { @@ -770,6 +750,7 @@ clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "hdmi", "sclk_hdmi"; + iommus = <&sysmmu_tv>; }; dp_phy: video-phy@10040720 { @@ -778,20 +759,6 @@ #phy-cells = <0>; }; - dp: dp-controller@145B0000 { - power-domains = <&pd_disp1>; - clocks = <&clock CLK_DP>; - clock-names = "dp"; - phys = <&dp_phy>; - phy-names = "dp"; - }; - - fimd: fimd@14400000 { - power-domains = <&pd_disp1>; - clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; - clock-names = "sclk_fimd", "fimd"; - }; - adc: adc@12D10000 { compatible = "samsung,exynos-adc-v1"; reg = <0x12D10000 0x100>; @@ -811,4 +778,287 @@ clocks = <&clock CLK_SSS>; clock-names = "secss"; }; + + sysmmu_g2d: sysmmu@10A60000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A60000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <24 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_r: sysmmu@11200000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11200000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <6 2>; + power-domains = <&pd_mfc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_l: sysmmu@11210000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11210000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <8 5>; + power-domains = <&pd_mfc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; + #iommu-cells = <0>; + }; + + sysmmu_rotator: sysmmu@11D40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11D40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg: sysmmu@11F20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11F20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 2>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_isp: sysmmu@13260000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13260000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_ISP>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_drc: sysmmu@13270000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13270000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <11 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_DRC>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_fd: sysmmu@132A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132A0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 0>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_FD>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_scc: sysmmu@13280000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13280000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 2>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_SCC>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_scp: sysmmu@13290000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13290000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_SCP>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_mcuctl: sysmmu@132B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 4>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_MCU>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_odc: sysmmu@132C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <11 0>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_ODC>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_dis0: sysmmu@132D0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132D0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 4>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_DIS0>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_dis1: sysmmu@132E0000{ + compatible = "samsung,exynos-sysmmu"; + reg = <0x132E0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <9 4>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_DIS1>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_3dnr: sysmmu@132F0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132F0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_3DNR>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite0: sysmmu@13C40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13C40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 4>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite1: sysmmu@13C50000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13C50000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <24 1>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>; + #iommu-cells = <0>; + }; + + sysmmu_gsc0: sysmmu@13E80000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E80000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 0>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; + #iommu-cells = <0>; + }; + + sysmmu_gsc1: sysmmu@13E90000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E90000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 2>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; + #iommu-cells = <0>; + }; + + sysmmu_gsc2: sysmmu@13EA0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13EA0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 4>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>; + #iommu-cells = <0>; + }; + + sysmmu_gsc3: sysmmu@13EB0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13EB0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 6>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>; + #iommu-cells = <0>; + }; + + sysmmu_fimd1: sysmmu@14640000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14640000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 2>; + power-domains = <&pd_disp1>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>; + #iommu-cells = <0>; + }; + + sysmmu_tv: sysmmu@14650000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14650000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <7 4>; + power-domains = <&pd_disp1>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>; + #iommu-cells = <0>; + }; +}; + +&dp { + power-domains = <&pd_disp1>; + clocks = <&clock CLK_DP>; + clock-names = "dp"; + phys = <&dp_phy>; + phy-names = "dp"; +}; + +&fimd { + power-domains = <&pd_disp1>; + clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; + clock-names = "sclk_fimd", "fimd"; + iommus = <&sysmmu_fimd1>; +}; + +&rtc { + clocks = <&clock CLK_RTC>; + clock-names = "rtc"; + interrupt-parent = <&pmu_system_controller>; + status = "disabled"; +}; + +&serial_0 { + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_1 { + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_2 { + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_3 { + clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; + clock-names = "uart", "clk_uart_baud0"; }; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index b82b6fa15f48..eeb4ac22cfce 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -13,6 +13,7 @@ #include "exynos5420.dtsi" #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/clock/samsung,s2mps11.h> / { model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; @@ -38,325 +39,6 @@ }; }; - rtc@101E0000 { - status = "okay"; - }; - - codec@11000000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - }; - - mmc@12200000 { - status = "okay"; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - vmmc-supply = <&ldo10_reg>; - bus-width = <8>; - cap-mmc-highspeed; - }; - - mmc@12220000 { - status = "okay"; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - vmmc-supply = <&ldo19_reg>; - vqmmc-supply = <&ldo13_reg>; - bus-width = <4>; - cap-sd-highspeed; - }; - - hsi2c_4: i2c@12CA0000 { - status = "okay"; - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - s2mps11,buck2-ramp-delay = <12>; - s2mps11,buck34-ramp-delay = <12>; - s2mps11,buck16-ramp-delay = <12>; - s2mps11,buck6-ramp-enable = <1>; - s2mps11,buck2-ramp-enable = <1>; - s2mps11,buck3-ramp-enable = <1>; - s2mps11,buck4-ramp-enable = <1>; - - interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; - - s2mps11_osc: clocks { - #clock-cells = <1>; - clock-output-names = "s2mps11_ap", - "s2mps11_cp", "s2mps11_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "PVDD_ALIVE_1V0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "PVDD_APIO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo3_reg: LDO3 { - regulator-name = "PVDD_APIO_MMCON_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "PVDD_ADC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo5_reg: LDO5 { - regulator-name = "PVDD_PLL_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "PVDD_ANAIP_1V0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo7_reg: LDO7 { - regulator-name = "PVDD_ANAIP_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo8_reg: LDO8 { - regulator-name = "PVDD_ABB_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo9_reg: LDO9 { - regulator-name = "PVDD_USB_3V3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "PVDD_PRE_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "PVDD_USB_1V0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "PVDD_HSIC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo13_reg: LDO13 { - regulator-name = "PVDD_APIO_MMCOFF_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo15_reg: LDO15 { - regulator-name = "PVDD_PERI_2V8"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo16_reg: LDO16 { - regulator-name = "PVDD_PERI_3V3"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - }; - - ldo18_reg: LDO18 { - regulator-name = "PVDD_EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: LDO19 { - regulator-name = "PVDD_TFLASH_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo20_reg: LDO20 { - regulator-name = "PVDD_BTWIFI_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo21_reg: LDO21 { - regulator-name = "PVDD_CAM1IO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo23_reg: LDO23 { - regulator-name = "PVDD_MIFS_1V1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ldo24_reg: LDO24 { - regulator-name = "PVDD_CAM1_AVDD_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo26_reg: LDO26 { - regulator-name = "PVDD_CAM0_AF_2V8"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo27_reg: LDO27 { - regulator-name = "PVDD_G3DS_1V0"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo28_reg: LDO28 { - regulator-name = "PVDD_TSP_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo29_reg: LDO29 { - regulator-name = "PVDD_AUDIO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo31_reg: LDO31 { - regulator-name = "PVDD_PERI_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo32_reg: LDO32 { - regulator-name = "PVDD_LCD_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo33_reg: LDO33 { - regulator-name = "PVDD_CAM0IO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo35_reg: LDO35 { - regulator-name = "PVDD_CAM0_DVDD_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo38_reg: LDO38 { - regulator-name = "PVDD_CAM0_AVDD_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "PVDD_MIF_1V1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "PVDD_INT_1V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "PVDD_G3D_1V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; - }; - - buck5_reg: BUCK5 { - regulator-name = "PVDD_LPDDR3_1V2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "PVDD_KFC_1V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "VIN_LLDO_1V4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "VIN_MLDO_2V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "VIN_HLDO_3V5"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "PVDD_EMMCF_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - }; - }; - }; - gpio_keys { compatible = "gpio-keys"; @@ -376,3 +58,335 @@ &cci { status = "disabled"; }; + +&hsi2c_4 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + s2mps11,buck2-ramp-delay = <12>; + s2mps11,buck34-ramp-delay = <12>; + s2mps11,buck16-ramp-delay = <12>; + s2mps11,buck6-ramp-enable = <1>; + s2mps11,buck2-ramp-enable = <1>; + s2mps11,buck3-ramp-enable = <1>; + s2mps11,buck4-ramp-enable = <1>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&s2mps11_irq>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "PVDD_ALIVE_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "PVDD_APIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo3_reg: LDO3 { + regulator-name = "PVDD_APIO_MMCON_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "PVDD_ADC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "PVDD_PLL_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "PVDD_ANAIP_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "PVDD_ANAIP_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "PVDD_ABB_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "PVDD_USB_3V3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "PVDD_PRE_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "PVDD_USB_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "PVDD_HSIC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "PVDD_APIO_MMCOFF_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "PVDD_PERI_2V8"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "PVDD_PERI_3V3"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "PVDD_EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "PVDD_TFLASH_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "PVDD_BTWIFI_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: LDO21 { + regulator-name = "PVDD_CAM1IO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "PVDD_MIFS_1V1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "PVDD_CAM1_AVDD_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "PVDD_CAM0_AF_2V8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "PVDD_G3DS_1V0"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "PVDD_TSP_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "PVDD_AUDIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo31_reg: LDO31 { + regulator-name = "PVDD_PERI_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo32_reg: LDO32 { + regulator-name = "PVDD_LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "PVDD_CAM0IO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "PVDD_CAM0_DVDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo38_reg: LDO38 { + regulator-name = "PVDD_CAM0_AVDD_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "PVDD_MIF_1V1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "PVDD_INT_1V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "PVDD_G3D_1V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "PVDD_LPDDR3_1V2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "PVDD_KFC_1V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VIN_LLDO_1V4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "VIN_MLDO_2V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "VIN_HLDO_3V5"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "PVDD_EMMCF_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; + vmmc-supply = <&ldo10_reg>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + vmmc-supply = <&ldo19_reg>; + vqmmc-supply = <&ldo13_reg>; + bus-width = <4>; + cap-sd-highspeed; +}; + +&pinctrl_0 { + s2mps11_irq: s2mps11-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 146e71118a72..8f4d76c5e11c 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -1027,7 +1027,7 @@ }; }; -&uart_3 { +&serial_3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 9103f2381a6d..98871f972c8a 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -64,105 +64,6 @@ }; }; - rtc@101E0000 { - status = "okay"; - }; - - codec@11000000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - }; - - mmc@12200000 { - status = "okay"; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - samsung,dw-mshc-hs400-timing = <0 2>; - samsung,read-strobe-delay = <90>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 - &sd0_rclk>; - bus-width = <8>; - cap-mmc-highspeed; - }; - - mmc@12220000 { - status = "okay"; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - bus-width = <4>; - cap-sd-highspeed; - }; - - dp-controller@145B0000 { - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; - status = "okay"; - }; - - fimd@14400000 { - status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing@0 { - clock-frequency = <50000>; - hactive = <2560>; - vactive = <1600>; - hfront-porch = <48>; - hback-porch = <80>; - hsync-len = <32>; - vback-porch = <16>; - vfront-porch = <8>; - vsync-len = <6>; - }; - }; - }; - - pinctrl@13400000 { - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; - }; - }; - - pinctrl@14000000 { - usb300_vbus_en: usb300-vbus-en { - samsung,pins = "gpg0-5"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - usb301_vbus_en: usb301-vbus-en { - samsung,pins = "gpg1-4"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - }; - - hdmi@14530000 { - status = "okay"; - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - }; - usb300_vbus_reg: regulator-usb300 { compatible = "regulator-fixed"; regulator-name = "VBUS0"; @@ -185,238 +86,338 @@ enable-active-high; }; - phy@12100000 { - vbus-supply = <&usb300_vbus_reg>; - }; +}; - phy@12500000 { - vbus-supply = <&usb301_vbus_reg>; +&dp { + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + status = "okay"; +}; + +&fimd { + status = "okay"; + display-timings { + native-mode = <&timing0>; + timing0: timing@0 { + clock-frequency = <50000>; + hactive = <2560>; + vactive = <1600>; + hfront-porch = <48>; + hback-porch = <80>; + hsync-len = <32>; + vback-porch = <16>; + vfront-porch = <8>; + vsync-len = <6>; + }; }; +}; - i2c_2: i2c@12C80000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - status = "okay"; +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; +}; - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; +&hsi2c_4 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + s2mps11,buck2-ramp-delay = <12>; + s2mps11,buck34-ramp-delay = <12>; + s2mps11,buck16-ramp-delay = <12>; + s2mps11,buck6-ramp-enable = <1>; + s2mps11,buck2-ramp-enable = <1>; + s2mps11,buck3-ramp-enable = <1>; + s2mps11,buck4-ramp-enable = <1>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; }; - }; - hsi2c_4: i2c@12CA0000 { - status = "okay"; - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - s2mps11,buck2-ramp-delay = <12>; - s2mps11,buck34-ramp-delay = <12>; - s2mps11,buck16-ramp-delay = <12>; - s2mps11,buck6-ramp-enable = <1>; - s2mps11,buck2-ramp-enable = <1>; - s2mps11,buck3-ramp-enable = <1>; - s2mps11,buck4-ramp-enable = <1>; - - s2mps11_osc: clocks { - #clock-cells = <1>; - clock-output-names = "s2mps11_ap", - "s2mps11_cp", "s2mps11_bt"; + regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_ldo6"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; }; - regulators { - ldo1_reg: LDO1 { - regulator-name = "vdd_ldo1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "vdd_ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo5_reg: LDO5 { - regulator-name = "vdd_ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "vdd_ldo6"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "vdd_ldo7"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "vdd_ldo8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo9_reg: LDO9 { - regulator-name = "vdd_ldo9"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "vdd_ldo10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "vdd_ldo11"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "vdd_ldo12"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "vdd_ldo13"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo15_reg: LDO15 { - regulator-name = "vdd_ldo15"; - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - regulator-always-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "vdd_ldo16"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "tsp_avdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo19_reg: LDO19 { - regulator-name = "vdd_sd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo24_reg: LDO24 { - regulator-name = "tsp_io"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "vdd_mem"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "vdd_kfc"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "vdd_1.0v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "vdd_1.8v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "vdd_2.8v_ldo"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3750000>; - regulator-always-on; - regulator-boot-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "vdd_vmem"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-boot-on; - }; + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "vdd_ldo16"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "tsp_avdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo19_reg: LDO19 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "tsp_io"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_mem"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1.0v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_1.8v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2.8v_ldo"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3750000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_vmem"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; }; }; }; }; + +&i2c_2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + status = "okay"; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 + &sd0_rclk>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; +}; + +&pinctrl_0 { + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_2 { + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gpg0-5"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gpg1-4"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; +}; + +&usbdrd_phy0 { + vbus-supply = <&usb300_vbus_reg>; +}; + +&usbdrd_phy1 { + vbus-supply = <&usb301_vbus_reg>; +}; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 45317538bbae..534f27ceb10b 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -179,6 +179,8 @@ clocks = <&clock CLK_MFC>; clock-names = "mfc"; power-domains = <&mfc_pd>; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; }; mmc_0: mmc@12200000 { @@ -264,9 +266,8 @@ mfc_pd: power-domain@10044060 { compatible = "samsung,exynos4210-pd"; reg = <0x10044060 0x20>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, - <&clock CLK_MOUT_USER_ACLK333>; - clock-names = "oscclk", "pclk0", "clk0"; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>; + clock-names = "oscclk", "clk0"; #power-domain-cells = <0>; }; @@ -280,16 +281,12 @@ compatible = "samsung,exynos4210-pd"; reg = <0x100440C0 0x20>; #power-domain-cells = <0>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK200>, + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK200_DISP1>, - <&clock CLK_MOUT_SW_ACLK300>, <&clock CLK_MOUT_USER_ACLK300_DISP1>, - <&clock CLK_MOUT_SW_ACLK400>, <&clock CLK_MOUT_USER_ACLK400_DISP1>, <&clock CLK_FIMD1>, <&clock CLK_MIXER>; - clock-names = "oscclk", "pclk0", "clk0", - "pclk1", "clk1", "pclk2", "clk2", - "asb0", "asb1"; + clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1"; }; pinctrl_0: pinctrl@13400000 { @@ -328,13 +325,6 @@ interrupts = <0 47 0>; }; - rtc: rtc@101E0000 { - clocks = <&clock CLK_RTC>; - clock-names = "rtc"; - interrupt-parent = <&pmu_system_controller>; - status = "disabled"; - }; - amba { #address-cells = <1>; #size-cells = <1>; @@ -416,6 +406,9 @@ <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_SCLK_I2S>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk0"; + #sound-dai-cells = <1>; samsung,idma-addr = <0x03000000>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; @@ -430,6 +423,9 @@ dma-names = "tx", "rx"; clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>; clock-names = "iis", "i2s_opclk0"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk1"; + #sound-dai-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&i2s1_bus>; status = "disabled"; @@ -443,6 +439,9 @@ dma-names = "tx", "rx"; clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>; clock-names = "iis", "i2s_opclk0"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk2"; + #sound-dai-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&i2s2_bus>; status = "disabled"; @@ -496,26 +495,6 @@ status = "disabled"; }; - uart_0: serial@12C00000 { - clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - }; - - uart_1: serial@12C10000 { - clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; - clock-names = "uart", "clk_uart_baud0"; - }; - - uart_2: serial@12C20000 { - clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; - clock-names = "uart", "clk_uart_baud0"; - }; - - uart_3: serial@12C30000 { - clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; - clock-names = "uart", "clk_uart_baud0"; - }; - pwm: pwm@12dd0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x12dd0000 0x100>; @@ -531,17 +510,9 @@ #phy-cells = <0>; }; - dp: dp-controller@145B0000 { - clocks = <&clock CLK_DP1>; - clock-names = "dp"; - phys = <&dp_phy>; - phy-names = "dp"; - power-domains = <&disp_pd>; - }; - mipi_phy: video-phy@10040714 { compatible = "samsung,s5pv210-mipi-video-phy"; - reg = <0x10040714 12>; + syscon = <&pmu_system_controller>; #phy-cells = <1>; }; @@ -558,12 +529,6 @@ status = "disabled"; }; - fimd: fimd@14400000 { - clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; - clock-names = "sclk_fimd", "fimd"; - power-domains = <&disp_pd>; - }; - adc: adc@12D10000 { compatible = "samsung,exynos-adc-v2"; reg = <0x12D10000 0x100>; @@ -750,6 +715,7 @@ <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "hdmi", "sclk_hdmi"; power-domains = <&disp_pd>; + iommus = <&sysmmu_tv>; }; gsc_0: video-scaler@13e00000 { @@ -759,6 +725,7 @@ clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; power-domains = <&gsc_pd>; + iommus = <&sysmmu_gscl0>; }; gsc_1: video-scaler@13e10000 { @@ -768,6 +735,25 @@ clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; power-domains = <&gsc_pd>; + iommus = <&sysmmu_gscl1>; + }; + + jpeg_0: jpeg@11F50000 { + compatible = "samsung,exynos5420-jpeg"; + reg = <0x11F50000 0x1000>; + interrupts = <0 89 0>; + clock-names = "jpeg"; + clocks = <&clock CLK_JPEG>; + iommus = <&sysmmu_jpeg0>; + }; + + jpeg_1: jpeg@11F60000 { + compatible = "samsung,exynos5420-jpeg"; + reg = <0x11F60000 0x1000>; + interrupts = <0 168 0>; + clock-names = "jpeg"; + clocks = <&clock CLK_JPEG2>; + iommus = <&sysmmu_jpeg1>; }; pmu_system_controller: system-controller@10040000 { @@ -962,4 +948,221 @@ samsung,sysreg-phandle = <&sysreg_system_controller>; samsung,pmureg-phandle = <&pmu_system_controller>; }; + + sysmmu_g2dr: sysmmu@0x10A60000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A60000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <24 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_g2dw: sysmmu@0x10A70000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A70000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <22 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_tv: sysmmu@0x14650000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14650000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <7 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>; + power-domains = <&disp_pd>; + #iommu-cells = <0>; + }; + + sysmmu_gscl0: sysmmu@0x13E80000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E80000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; + power-domains = <&gsc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_gscl1: sysmmu@0x13E90000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E90000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; + power-domains = <&gsc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_scaler0r: sysmmu@0x12880000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12880000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <22 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; + #iommu-cells = <0>; + }; + + sysmmu_scaler1r: sysmmu@0x12890000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12890000 0x1000>; + interrupts = <0 186 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; + #iommu-cells = <0>; + }; + + sysmmu_scaler2r: sysmmu@0x128A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128A0000 0x1000>; + interrupts = <0 188 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; + #iommu-cells = <0>; + }; + + sysmmu_scaler0w: sysmmu@0x128C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <27 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; + #iommu-cells = <0>; + }; + + sysmmu_scaler1w: sysmmu@0x128D0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128D0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <22 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; + #iommu-cells = <0>; + }; + + sysmmu_scaler2w: sysmmu@0x128E0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128E0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <19 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg0: sysmmu@0x11F10000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11F10000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg1: sysmmu@0x11F20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11F20000 0x1000>; + interrupts = <0 169 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_l: sysmmu@0x11200000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11200000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <6 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; + power-domains = <&mfc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_r: sysmmu@0x11210000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11210000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <8 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; + power-domains = <&mfc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_fimd1_0: sysmmu@0x14640000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14640000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>; + power-domains = <&disp_pd>; + #iommu-cells = <0>; + }; + + sysmmu_fimd1_1: sysmmu@0x14680000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14680000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>; + power-domains = <&disp_pd>; + #iommu-cells = <0>; + }; +}; + +&dp { + clocks = <&clock CLK_DP1>; + clock-names = "dp"; + phys = <&dp_phy>; + phy-names = "dp"; + power-domains = <&disp_pd>; +}; + +&fimd { + clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; + clock-names = "sclk_fimd", "fimd"; + power-domains = <&disp_pd>; + iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>; + iommu-names = "m0", "m1"; +}; + +&rtc { + clocks = <&clock CLK_RTC>; + clock-names = "rtc"; + interrupt-parent = <&pmu_system_controller>; + status = "disabled"; +}; + +&serial_0 { + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_1 { + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_2 { + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_3 { + clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; + clock-names = "uart", "clk_uart_baud0"; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi new file mode 100644 index 000000000000..8adf455744e9 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -0,0 +1,479 @@ +/* + * Hardkernel Odroid XU3 board device tree source + * + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/samsung-i2s.h> +#include "exynos5800.dtsi" + +/ { + memory { + reg = <0x40000000 0x7EA00000>; + }; + + chosen { + linux,stdout-path = &serial_2; + }; + + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + emmc_pwrseq: pwrseq { + pinctrl-0 = <&emmc_nrst_pin>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpd1 0 1>; + }; + + pwmleds { + compatible = "pwm-leds"; + + greenled { + label = "green:mmc0"; + pwms = <&pwm 1 2000000 0>; + pwm-names = "pwm1"; + /* + * Green LED is much brighter than the others + * so limit its max brightness + */ + max_brightness = <127>; + linux,default-trigger = "mmc0"; + }; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpioleds { + compatible = "gpio-leds"; + redled { + label = "red:microSD"; + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + }; + + sound: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "Odroid-XU3"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speakers", "Speakers"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Headphone Jack", "MICBIAS", + "IN1", "Headphone Jack", + "Speakers", "SPKL", + "Speakers", "SPKR"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + + simple-audio-card,cpu { + sound-dai = <&i2s0 0>; + system-clock-frequency = <19200000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&max98090>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + }; + }; +}; + +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FIN_PLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, + <0>, + <19200000>; +}; + +&fimd { + status = "okay"; +}; + + +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + + vdd_osc-supply = <&ldo7_reg>; + vdd_pll-supply = <&ldo6_reg>; + vdd-supply = <&ldo6_reg>; +}; + +&hsi2c_4 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + s2mps11,buck2-ramp-delay = <12>; + s2mps11,buck34-ramp-delay = <12>; + s2mps11,buck16-ramp-delay = <12>; + s2mps11,buck6-ramp-enable = <1>; + s2mps11,buck2-ramp-enable = <1>; + s2mps11,buck3-ramp-enable = <1>; + s2mps11,buck4-ramp-enable = <1>; + + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&s2mps11_irq>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_ldo6"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "vdd_ldo16"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "tsp_avdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo19_reg: LDO19 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "tsp_io"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo26_reg: LDO26 { + regulator-name = "vdd_ldo26"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_mem"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1.0v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_1.8v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2.8v_ldo"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3750000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_vmem"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&hsi2c_5 { + status = "okay"; + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&i2c_2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + status = "okay"; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + mmc-pwrseq = <&emmc_pwrseq>; + cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>; + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; +}; + +&pinctrl_0 { + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + s2mps11_irq: s2mps11-irq { + samsung,pins = "gpx0-4"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + emmc_nrst_pin: emmc-nrst { + samsung,pins = "gpd1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pwm { + /* + * PWM 0 -- fan + * PWM 1 -- Green LED + * PWM 2 -- Blue LED + * PWM 3 -- on MIPI connector for backlight + */ + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "otg"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts new file mode 100644 index 000000000000..c06882bbb822 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -0,0 +1,20 @@ +/* + * Hardkernel Odroid XU3-Lite board device tree source + * + * Copyright (c) 2015 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5422-odroidxu3-common.dtsi" + +/ { + model = "Hardkernel Odroid XU3 Lite"; + compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index edc25cf1d717..78e6a502f320 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -11,348 +11,11 @@ */ /dts-v1/; -#include "exynos5800.dtsi" +#include "exynos5422-odroidxu3-common.dtsi" / { model = "Hardkernel Odroid XU3"; compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; - - memory { - reg = <0x40000000 0x7EA00000>; - }; - - chosen { - linux,stdout-path = &serial_2; - }; - - fimd@14400000 { - status = "okay"; - }; - - firmware@02073000 { - compatible = "samsung,secure-firmware"; - reg = <0x02073000 0x1000>; - }; - - fixed-rate-clocks { - oscclk { - compatible = "samsung,exynos5420-oscclk"; - clock-frequency = <24000000>; - }; - }; - - hsi2c_4: i2c@12CA0000 { - status = "okay"; - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - s2mps11,buck2-ramp-delay = <12>; - s2mps11,buck34-ramp-delay = <12>; - s2mps11,buck16-ramp-delay = <12>; - s2mps11,buck6-ramp-enable = <1>; - s2mps11,buck2-ramp-enable = <1>; - s2mps11,buck3-ramp-enable = <1>; - s2mps11,buck4-ramp-enable = <1>; - - s2mps11_osc: clocks { - #clock-cells = <1>; - clock-output-names = "s2mps11_ap", - "s2mps11_cp", "s2mps11_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "vdd_ldo1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "vdd_ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo5_reg: LDO5 { - regulator-name = "vdd_ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "vdd_ldo6"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "vdd_ldo7"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "vdd_ldo8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo9_reg: LDO9 { - regulator-name = "vdd_ldo9"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "vdd_ldo10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "vdd_ldo11"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "vdd_ldo12"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "vdd_ldo13"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo15_reg: LDO15 { - regulator-name = "vdd_ldo15"; - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - regulator-always-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "vdd_ldo16"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "tsp_avdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo19_reg: LDO19 { - regulator-name = "vdd_sd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo24_reg: LDO24 { - regulator-name = "tsp_io"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo26_reg: LDO26 { - regulator-name = "vdd_ldo26"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "vdd_mem"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "vdd_kfc"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "vdd_1.0v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "vdd_1.8v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "vdd_2.8v_ldo"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3750000>; - regulator-always-on; - regulator-boot-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "vdd_vmem"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; - }; - - emmc_pwrseq: pwrseq { - pinctrl-0 = <&emmc_nrst_pin>; - pinctrl-names = "default"; - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpd1 0 1>; - }; - - i2c_2: i2c@12C80000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - status = "okay"; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; - }; - - rtc@101E0000 { - status = "okay"; - }; -}; - -&hdmi { - status = "okay"; - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - - vdd_osc-supply = <&ldo7_reg>; - vdd_pll-supply = <&ldo6_reg>; - vdd-supply = <&ldo6_reg>; -}; - -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; -}; - -&mmc_0 { - status = "okay"; - mmc-pwrseq = <&emmc_pwrseq>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - bus-width = <8>; - cap-mmc-highspeed; -}; - -&mmc_2 { - status = "okay"; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - bus-width = <4>; - cap-sd-highspeed; -}; - -&pinctrl_0 { - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; - }; -}; - -&pinctrl_1 { - emmc_nrst_pin: emmc-nrst { - samsung,pins = "gpd1-0"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; -}; - -&usbdrd_dwc3_0 { - dr_mode = "host"; -}; - -&usbdrd_dwc3_1 { - dr_mode = "otg"; }; &i2c_0 { diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts index 268609a42b2c..a98501bab6fc 100644 --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -27,13 +27,13 @@ }; }; - gmac: ethernet@00230000 { - fixed_phy; - phy_addr = <1>; - }; - spi { status = "disabled"; }; }; + +&gmac { + fixed_phy; + phy_addr = <1>; +}; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index ff55dac6e219..e4443f4e6572 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -20,59 +20,58 @@ bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; - spi_0: spi@D0000 { - - flash: w25q128@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128"; - spi-max-frequency = <15625000>; - reg = <0>; - controller-data { - samsung,spi-feedback-delay = <0>; - }; + fixed-rate-clocks { + xtal { + compatible = "samsung,clock-xtal"; + clock-frequency = <50000000>; + }; + }; +}; - partition@00000 { - label = "BootLoader"; - reg = <0x60000 0x80000>; - read-only; - }; +&pcie_0 { + reset-gpio = <&pin_ctrl 5 0>; + status = "okay"; +}; - partition@e0000 { - label = "Recovery-Kernel"; - reg = <0xe0000 0x300000>; - read-only; - }; +&pcie_1 { + reset-gpio = <&pin_ctrl 22 0>; + status = "okay"; +}; - partition@3e0000 { - label = "CRAM-FS"; - reg = <0x3e0000 0x700000>; - read-only; - }; +&spi_0 { + flash: w25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128"; + spi-max-frequency = <15625000>; + reg = <0>; + controller-data { + samsung,spi-feedback-delay = <0>; + }; - partition@ae0000 { - label = "User-Data"; - reg = <0xae0000 0x520000>; - }; + partition@00000 { + label = "BootLoader"; + reg = <0x60000 0x80000>; + read-only; + }; + partition@e0000 { + label = "Recovery-Kernel"; + reg = <0xe0000 0x300000>; + read-only; }; - }; + partition@3e0000 { + label = "CRAM-FS"; + reg = <0x3e0000 0x700000>; + read-only; + }; - fixed-rate-clocks { - xtal { - compatible = "samsung,clock-xtal"; - clock-frequency = <50000000>; + partition@ae0000 { + label = "User-Data"; + reg = <0xae0000 0x520000>; }; - }; - pcie@290000 { - reset-gpio = <&pin_ctrl 5 0>; - status = "okay"; }; - pcie@2a0000 { - reset-gpio = <&pin_ctrl 22 0>; - status = "okay"; - }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 59d9416b3b03..f18b51f2eeaa 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -279,7 +279,7 @@ clock-names = "usbhost"; }; - pcie@290000 { + pcie_0: pcie@290000 { compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; reg = <0x290000 0x1000 0x270000 0x1000 @@ -300,7 +300,7 @@ status = "disabled"; }; - pcie@2a0000 { + pcie_1: pcie@2a0000 { compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; reg = <0x2a0000 0x1000 0x272000 0x1000 diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 02eb8b15374f..7d5b386b5ae6 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -990,7 +990,7 @@ }; }; -&uart_3 { +&serial_3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 82045398bf1f..a8b1c53ebe46 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -74,6 +74,12 @@ status = "okay"; }; + i2c: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_b>; + status = "okay"; + }; + duart: serial@80070000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index bbcfb5a19c77..c892d58e8dad 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -308,6 +308,39 @@ fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; + + i2c_pins_a: i2c@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_I2C_SCL__I2C_SCL + MX23_PAD_I2C_SDA__I2C_SDA + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + i2c_pins_b: i2c@1 { + reg = <1>; + fsl,pinmux-ids = < + MX23_PAD_LCD_ENABLE__I2C_SCL + MX23_PAD_LCD_HSYNC__I2C_SDA + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + i2c_pins_c: i2c@2 { + reg = <2>; + fsl,pinmux-ids = < + MX23_PAD_SSP1_DATA1__I2C_SCL + MX23_PAD_SSP1_DATA2__I2C_SDA + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; }; digctl@8001c000 { @@ -444,8 +477,13 @@ status = "disabled"; }; - i2c@80058000 { + i2c: i2c@80058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx23-i2c"; reg = <0x80058000 0x2000>; + interrupts = <27>; + clock-frequency = <100000>; dmas = <&dma_apbx 3>; dma-names = "rx-tx"; status = "disabled"; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index b04b6b8850a7..570aa339a05e 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -99,6 +99,9 @@ solomon,height = <32>; solomon,width = <128>; solomon,page-offset = <0>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts new file mode 100644 index 000000000000..df26e542ab3a --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-apf6dev.dts @@ -0,0 +1,60 @@ +/* + * Copyright 2015 Armadeus Systems + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-apf6.dtsi" +#include "imx6qdl-apf6dev.dtsi" + +/ { + model = "Armadeus APF6 Solo Module on APF6Dev Board"; + compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts new file mode 100644 index 000000000000..bb92f309c191 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts @@ -0,0 +1,159 @@ +/* + * support for the imx6 based aristainetos2 board + * + * Copyright (C) 2015 Heiko Schocher <hs@denx.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-aristainetos2.dtsi" + +/ { + model = "aristainetos2 i.MX6 Dual Lite Board 4"; + compatible = "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + display0: display@di0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp>; + + port@0 { + reg = <0>; + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&ecspi1 { + lcd_panel: display@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lg,lg4573"; + spi-max-frequency = <10000000>; + reg = <0>; + power-on-delay = <10>; + + display-timings { + 480x800p57 { + native-mode; + clock-frequency = <27000027>; + hactive = <480>; + vactive = <800>; + hfront-porch = <10>; + hback-porch = <59>; + hsync-len = <10>; + vback-porch = <15>; + vfront-porch = <15>; + vsync-len = <15>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; +}; + +&i2c3 { + touch: touch@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpio2>; + interrupts = <9 8>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&iomuxc { + pinctrl_ipu_disp: ipudisp1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xE1 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xE1 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xE1 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xE1 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xE1 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xE1 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xE1 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xE1 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xE1 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xE1 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xE1 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xE1 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xE1 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xE1 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xE1 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xe1 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xE1 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xE1 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xE1 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xE1 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xE1 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xE1 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xE1 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xE1 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xE1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts new file mode 100644 index 000000000000..3d5ad2cc7e22 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts @@ -0,0 +1,97 @@ +/* + * support for the imx6 based aristainetos2 board + * + * Copyright (C) 2015 Heiko Schocher <hs@denx.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-aristainetos2.dtsi" + +/ { + model = "aristainetos2 i.MX6 Dual Lite Board 7"; + compatible = "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + panel: panel { + compatible = "lg,lb070wv8"; + backlight = <&backlight>; + enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&i2c3 { + touch: touch@4d { + compatible = "atmel,maxtouch"; + reg = <0x4d>; + interrupt-parent = <&gpio2>; + interrupts = <9 8>; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + status = "okay"; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&ipu1_di0_lvds0>; + }; + }; + + port@4 { + reg = <4>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts index e0b7fe8e18f8..2a43917d048e 100644 --- a/arch/arm/boot/dts/imx6dl-cubox-i.dts +++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts @@ -7,9 +7,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/arch/arm/boot/dts/imx6dl-gw551x.dts b/arch/arm/boot/dts/imx6dl-gw551x.dts new file mode 100644 index 000000000000..82d5f85722ea --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw551x.dts @@ -0,0 +1,55 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-gw551x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X"; + compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 7369d2d7da3e..d5c966031962 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -8,9 +8,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index f94bf72832af..4b0ec0703825 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -106,6 +106,10 @@ }; }; +&gpt { + compatible = "fsl,imx6dl-gpt", "fsl,imx6q-gpt"; +}; + &hdmi { compatible = "fsl,imx6dl-hdmi"; }; diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts new file mode 100644 index 000000000000..4e4de821d9e5 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-apf6dev.dts @@ -0,0 +1,64 @@ +/* + * Copyright 2015 Armadeus Systems + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-apf6.dtsi" +#include "imx6qdl-apf6dev.dtsi" + +/ { + model = "Armadeus APF6 Quad / Dual Module on APF6Dev Board"; + compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts index 670bd8c4c847..353425edcdf4 100644 --- a/arch/arm/boot/dts/imx6q-cubox-i.dts +++ b/arch/arm/boot/dts/imx6q-cubox-i.dts @@ -7,9 +7,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/arch/arm/boot/dts/imx6q-gw551x.dts b/arch/arm/boot/dts/imx6q-gw551x.dts new file mode 100644 index 000000000000..2c7feeef1b0e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw551x.dts @@ -0,0 +1,55 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-gw551x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW551X"; + compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts index 0f6044553a24..1884c16784e2 100644 --- a/arch/arm/boot/dts/imx6q-hummingboard.dts +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -8,9 +8,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi new file mode 100644 index 000000000000..1ebf29f43a24 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi @@ -0,0 +1,158 @@ +/* + * Copyright 2015 Armadeus Systems + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-duration = <10>; + phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* Bluetooth */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* Wi-Fi */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + non-removable; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + tcxo-clock-frequency = <38400000>; + }; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +&iomuxc { + apf6 { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x130b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x13030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1f030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1f030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b0 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b0 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b0 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x130b0 /* BT_EN */ + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* WL_EN */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* WL_IRQ */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi new file mode 100644 index 000000000000..e26ebeb5b45c --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -0,0 +1,479 @@ +/* + * Copyright 2015 Armadeus Systems + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + chosen { + stdout-path = &uart4; + }; + + display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_disp1>; + + display-timings { + lw700 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + port { + display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + user-button { + label = "User button"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + gpio-key,wakeup; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + user-led { + label = "User LED"; + gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; + + sound { + compatible = "fsl,imx6-armadeus-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6-armadeus-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, + <&gpio4 10 GPIO_ACTIVE_LOW>, + <&gpio4 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + touchscreen@48 { + compatible = "semtech,sx8654"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio6>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display_in>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +/* GPS */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* GSM */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +/* console */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + phy_type = "utmi"; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + dr_mode = "otg"; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + no-1-8-v; + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpios>; + + apf6dev { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0 + >; + }; + + pinctrl_gpios: gpiosgrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 + >; + }; + + pinctrl_gsm: gsmgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + >; + }; + + pinctrl_ipu1_disp1: ipu1disp1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; + + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi new file mode 100644 index 000000000000..1d85de2befb3 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -0,0 +1,633 @@ +/* + * support for the imx6 based aristainetos2 board + * + * Copyright (C) 2015 Heiko Schocher <hs@denx.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/imx6qdl-clock.h> + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>; + }; + + regulators { + compatible = "simple-bus"; + + reg_2p5v: 2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: usb-otg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH + &gpio4 10 GPIO_ACTIVE_HIGH + &gpio4 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; +}; + +&ecspi2 { + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&ecspi4 { + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + status = "okay"; + + flash: m25p80@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11"; + spi-max-frequency = <20000000>; + reg = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <04 0x8>; + + regulators { + bcore1 { + regulator-name = "bcore1"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + bcore2 { + regulator-name = "bcore2"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + bpro { + regulator-name = "bpro"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + bperi { + regulator-name = "bperi"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + bmem { + regulator-name = "bmem"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1800000>; + }; + + ldo3 { + regulator-name = "ldo3"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4 { + regulator-name = "ldo4"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5 { + regulator-name = "ldo5"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6 { + regulator-name = "ldo6"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "ldo7"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo8 { + regulator-name = "ldo8"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9 { + regulator-name = "ldo9"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo10 { + regulator-name = "ldo10"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo11 { + regulator-name = "ldo11"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + bio { + regulator-name = "bio"; + regulator-always-on = <1>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + + tmp103: tmp103@71 { + compatible = "ti,tmp103"; + reg = <0x71>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + expander: tca6416@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + }; + + rtc@68 { + compatible = "dallas,m41t00"; + reg = <0x68>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + eeprom@50{ + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@57{ + compatible = "atmel,24c64"; + reg = <0x57>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_HIGH>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&pcie { + reset-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usbotg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + no-1-8-v; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio>; + + pinctrl_audmux: audmux { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */ + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */ + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 /* SS0# */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 /* SS1# */ + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */ + MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0 + MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* led enable */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* LCD power enable */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* led yellow */ + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 /* led red */ + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 /* led green */ + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 /* led blue */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* Profibus IRQ */ + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* FPGA IRQ */ + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 /* spi bus #2 SS driver enable */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/ + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b0b0 /* USB_OTG_ID = GPIO1_24*/ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* Touchscreen IRQ */ + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b0 /* PCIe reset */ + >; + }; + + pinctrl_gpmi_nand: gpmi-nand { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0 + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 /* backlight enable */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus { + fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>; + }; + + pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus { + fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 /* SD1 card detect input */ + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* SD1 write protect input */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 /* SD2 level shifter output enable */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 /* SD2 card detect input */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SD2 write protect input */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index d033bb182060..59e5d15e3ec4 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -7,9 +7,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi new file mode 100644 index 000000000000..d1866a0a2f13 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -0,0 +1,314 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + nand = &gpmi; + ssi0 = &ssi1; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + chosen { + bootargs = "console=ttymxc1,115200"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_5p0v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_h1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + gpio_exp: pca9555@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw51xx { + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 151a3db2aea9..62a82f3eba88 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -7,9 +7,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -192,6 +191,12 @@ >; }; + pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset { + fsl,pins = < + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1 + >; + }; + pinctrl_hummingboard_pwm1: pwm1grp { fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>; }; @@ -245,6 +250,13 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>; + reset-gpio = <&gpio3 4 0>; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_pwm1>; @@ -263,7 +275,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index 4a1820309cdb..469ef58ce4bc 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -10,9 +10,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index 349f82be816e..6d4069cc9419 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -7,9 +7,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -39,15 +38,98 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/gpio/gpio.h> +/ { + clk_sdio: sdio-clock { + compatible = "gpio-gate-clock"; + #clock-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_osc>; + enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + }; + + regulators { + compatible = "simple-bus"; + + reg_brcm: brcm-reg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_reg>; + regulator-name = "brcm_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; + }; + }; + + usdhc1_pwrseq: usdhc1_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>, + <&gpio6 0 GPIO_ACTIVE_LOW>; + clocks = <&clk_sdio>; + clock-names = "ext_clock"; + }; +}; &iomuxc { microsom { + pinctrl_microsom_brcm_bt: microsom-brcm-bt { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070 + MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x40013070 + MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070 + >; + }; + + pinctrl_microsom_brcm_osc: microsom-brcm-osc { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070 + >; + }; + + pinctrl_microsom_brcm_reg: microsom-brcm-reg { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x40013070 + >; + }; + + pinctrl_microsom_brcm_wifi: microsom-brcm-wifi { + fsl,pins = < + MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x40013070 + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070 + MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x40013070 + >; + }; + pinctrl_microsom_uart1: microsom-uart1 { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; + + pinctrl_microsom_uart4: microsom-uart4 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_microsom_usdhc1: microsom-usdhc1 { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + >; + }; }; }; @@ -56,3 +138,23 @@ pinctrl-0 = <&pinctrl_microsom_uart1>; status = "okay"; }; + +/* UART4 - Connected to optional BRCM Wifi/BT/FM */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>; + bus-width = <4>; + mmc-pwrseq = <&usdhc1_pwrseq>; + keep-power-in-suspend; + non-removable; + vmmc-supply = <®_brcm>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 08218120e770..3af16dfe417b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -122,7 +122,7 @@ status = "okay"; }; - backlight_lvds { + backlight_lvds: backlight_lvds { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -130,6 +130,17 @@ power-supply = <®_3p3v>; status = "okay"; }; + + panel { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; }; &audmux { @@ -379,18 +390,11 @@ fsl,data-width = <18>; status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 0b28a9d5241e..e00c44f6a0df 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -121,7 +121,7 @@ status = "okay"; }; - backlight_lvds { + backlight_lvds: backlight_lvds { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -129,6 +129,17 @@ power-supply = <®_3p3v>; status = "okay"; }; + + panel { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; }; &audmux { @@ -374,18 +385,11 @@ fsl,data-width = <18>; status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index f74a8ded515f..e6d13592080d 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -119,6 +119,34 @@ status = "disabled"; }; + hdmi: hdmi@0120000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00120000 0x9000>; + interrupts = <0 115 0x04>; + gpr = <&gpr>; + clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>, + <&clks IMX6QDL_CLK_HDMI_ISFR>; + clock-names = "iahb", "isfr"; + status = "disabled"; + + port@0 { + reg = <0>; + + hdmi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_hdmi>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_hdmi>; + }; + }; + }; + timer@00a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; @@ -343,6 +371,7 @@ clocks = <&clks IMX6QDL_CLK_VPU_AXI>, <&clks IMX6QDL_CLK_MMDC_CH0_AXI>; clock-names = "per", "ahb"; + power-domains = <&gpc 1>; resets = <&src 1>; iram = <&ocram>; }; @@ -778,34 +807,6 @@ }; }; - hdmi: hdmi@0120000 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x00120000 0x9000>; - interrupts = <0 115 0x04>; - gpr = <&gpr>; - clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>, - <&clks IMX6QDL_CLK_HDMI_ISFR>; - clock-names = "iahb", "isfr"; - status = "disabled"; - - port@0 { - reg = <0>; - - hdmi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_hdmi>; - }; - }; - - port@1 { - reg = <1>; - - hdmi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_hdmi>; - }; - }; - }; - dcic1: dcic@020e4000 { reg = <0x020e4000 0x4000>; interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 64f7decf1fdc..0da906bd8df2 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -58,40 +58,6 @@ reg = <0x80000000 0x20000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 0 0>; - enable-active-high; - }; - - reg_usb_otg2_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 2 0>; - enable-active-high; - }; - - reg_1p8v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - usdhc3_pwrseq: usdhc3_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ @@ -121,14 +87,13 @@ }; &usbotg1 { - vbus-supply = <®_usb_otg1_vbus>; - dr_mode = "host"; + dr_mode = "peripheral"; disable-over-current; status = "okay"; }; &usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; disable-over-current; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h new file mode 100644 index 000000000000..a8d81497edb3 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -0,0 +1,1038 @@ +/* + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX7D_PINFUNC_H +#define __DTS_IMX7D_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ + +#define MX7D_PAD_EPDC_DATA00__EPDC_DATA0 0x0034 0x02A4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD 0x0034 0x02A4 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x0034 0x02A4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA00__KPP_ROW3 0x0034 0x02A4 0x0620 0x3 0x0 +#define MX7D_PAD_EPDC_DATA00__EIM_AD0 0x0034 0x02A4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x0034 0x02A4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA00__LCD_DATA0 0x0034 0x02A4 0x0638 0x6 0x0 +#define MX7D_PAD_EPDC_DATA00__LCD_CLK 0x0034 0x02A4 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA01__EPDC_DATA1 0x0038 0x02A8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA01__SIM1_PORT2_CLK 0x0038 0x02A8 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x0038 0x02A8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA01__KPP_COL3 0x0038 0x02A8 0x0600 0x3 0x0 +#define MX7D_PAD_EPDC_DATA01__EIM_AD1 0x0038 0x02A8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x0038 0x02A8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA01__LCD_DATA1 0x0038 0x02A8 0x063C 0x6 0x0 +#define MX7D_PAD_EPDC_DATA01__LCD_ENABLE 0x0038 0x02A8 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA02__EPDC_DATA2 0x003C 0x02AC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA02__SIM1_PORT2_RST_B 0x003C 0x02AC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x003C 0x02AC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA02__KPP_ROW2 0x003C 0x02AC 0x061C 0x3 0x0 +#define MX7D_PAD_EPDC_DATA02__EIM_AD2 0x003C 0x02AC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x003C 0x02AC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA02__LCD_DATA2 0x003C 0x02AC 0x0640 0x6 0x0 +#define MX7D_PAD_EPDC_DATA02__LCD_VSYNC 0x003C 0x02AC 0x0698 0x7 0x0 +#define MX7D_PAD_EPDC_DATA03__EPDC_DATA3 0x0040 0x02B0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA03__SIM1_PORT2_SVEN 0x0040 0x02B0 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x0040 0x02B0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA03__KPP_COL2 0x0040 0x02B0 0x05FC 0x3 0x0 +#define MX7D_PAD_EPDC_DATA03__EIM_AD3 0x0040 0x02B0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x0040 0x02B0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA03__LCD_DATA3 0x0040 0x02B0 0x0644 0x6 0x0 +#define MX7D_PAD_EPDC_DATA03__LCD_HSYNC 0x0040 0x02B0 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA04__EPDC_DATA4 0x0044 0x02B4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA04__SIM1_PORT2_PD 0x0044 0x02B4 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA04__QSPI_A_DQS 0x0044 0x02B4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA04__KPP_ROW1 0x0044 0x02B4 0x0618 0x3 0x0 +#define MX7D_PAD_EPDC_DATA04__EIM_AD4 0x0044 0x02B4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x0044 0x02B4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA04__LCD_DATA4 0x0044 0x02B4 0x0648 0x6 0x0 +#define MX7D_PAD_EPDC_DATA04__JTAG_FAIL 0x0044 0x02B4 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA05__EPDC_DATA5 0x0048 0x02B8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA05__SIM2_PORT2_TRXD 0x0048 0x02B8 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x0048 0x02B8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA05__KPP_COL1 0x0048 0x02B8 0x05F8 0x3 0x0 +#define MX7D_PAD_EPDC_DATA05__EIM_AD5 0x0048 0x02B8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x0048 0x02B8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA05__LCD_DATA5 0x0048 0x02B8 0x064C 0x6 0x0 +#define MX7D_PAD_EPDC_DATA05__JTAG_ACTIVE 0x0048 0x02B8 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA06__EPDC_DATA6 0x004C 0x02BC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA06__SIM2_PORT2_CLK 0x004C 0x02BC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x004C 0x02BC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA06__KPP_ROW0 0x004C 0x02BC 0x0614 0x3 0x0 +#define MX7D_PAD_EPDC_DATA06__EIM_AD6 0x004C 0x02BC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x004C 0x02BC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA06__LCD_DATA6 0x004C 0x02BC 0x0650 0x6 0x0 +#define MX7D_PAD_EPDC_DATA06__JTAG_DE_B 0x004C 0x02BC 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA07__EPDC_DATA7 0x0050 0x02C0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA07__SIM2_PORT2_RST_B 0x0050 0x02C0 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B 0x0050 0x02C0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA07__KPP_COL0 0x0050 0x02C0 0x05F4 0x3 0x0 +#define MX7D_PAD_EPDC_DATA07__EIM_AD7 0x0050 0x02C0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x0050 0x02C0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA07__LCD_DATA7 0x0050 0x02C0 0x0654 0x6 0x0 +#define MX7D_PAD_EPDC_DATA07__JTAG_DONE 0x0050 0x02C0 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA08__EPDC_DATA8 0x0054 0x02C4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA08__SIM1_PORT1_TRXD 0x0054 0x02C4 0x06E4 0x1 0x0 +#define MX7D_PAD_EPDC_DATA08__QSPI_B_DATA0 0x0054 0x02C4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x0054 0x02C4 0x071C 0x3 0x0 +#define MX7D_PAD_EPDC_DATA08__UART6_DTE_TX 0x0054 0x02C4 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA08__EIM_OE 0x0054 0x02C4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x0054 0x02C4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA08__LCD_DATA8 0x0054 0x02C4 0x0658 0x6 0x0 +#define MX7D_PAD_EPDC_DATA08__LCD_BUSY 0x0054 0x02C4 0x0634 0x7 0x0 +#define MX7D_PAD_EPDC_DATA08__EPDC_SDCLK 0x0054 0x02C4 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA09__EPDC_DATA9 0x0058 0x02C8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA09__SIM1_PORT1_CLK 0x0058 0x02C8 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA09__QSPI_B_DATA1 0x0058 0x02C8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x0058 0x02C8 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA09__UART6_DTE_RX 0x0058 0x02C8 0x071C 0x3 0x1 +#define MX7D_PAD_EPDC_DATA09__EIM_RW 0x0058 0x02C8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x0058 0x02C8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA09__LCD_DATA9 0x0058 0x02C8 0x065C 0x6 0x0 +#define MX7D_PAD_EPDC_DATA09__LCD_DATA0 0x0058 0x02C8 0x0638 0x7 0x1 +#define MX7D_PAD_EPDC_DATA09__EPDC_SDLE 0x0058 0x02C8 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA10__EPDC_DATA10 0x005C 0x02CC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA10__SIM1_PORT1_RST_B 0x005C 0x02CC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA10__QSPI_B_DATA2 0x005C 0x02CC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x005C 0x02CC 0x0718 0x3 0x0 +#define MX7D_PAD_EPDC_DATA10__UART6_DTE_CTS 0x005C 0x02CC 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA10__EIM_CS0_B 0x005C 0x02CC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x005C 0x02CC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA10__LCD_DATA10 0x005C 0x02CC 0x0660 0x6 0x0 +#define MX7D_PAD_EPDC_DATA10__LCD_DATA9 0x005C 0x02CC 0x065C 0x7 0x1 +#define MX7D_PAD_EPDC_DATA10__EPDC_SDOE 0x005C 0x02CC 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA11__EPDC_DATA11 0x0060 0x02D0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA11__SIM1_PORT1_SVEN 0x0060 0x02D0 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA11__QSPI_B_DATA3 0x0060 0x02D0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x0060 0x02D0 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA11__UART6_DTE_RTS 0x0060 0x02D0 0x0718 0x3 0x1 +#define MX7D_PAD_EPDC_DATA11__EIM_BCLK 0x0060 0x02D0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x0060 0x02D0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA11__LCD_DATA11 0x0060 0x02D0 0x0664 0x6 0x0 +#define MX7D_PAD_EPDC_DATA11__LCD_DATA1 0x0060 0x02D0 0x063C 0x7 0x1 +#define MX7D_PAD_EPDC_DATA11__EPDC_SDCE0 0x0060 0x02D0 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA12__EPDC_DATA12 0x0064 0x02D4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA12__SIM1_PORT1_PD 0x0064 0x02D4 0x06E0 0x1 0x0 +#define MX7D_PAD_EPDC_DATA12__QSPI_B_DQS 0x0064 0x02D4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x0064 0x02D4 0x0724 0x3 0x0 +#define MX7D_PAD_EPDC_DATA12__UART7_DTE_TX 0x0064 0x02D4 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA12__EIM_LBA_B 0x0064 0x02D4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x0064 0x02D4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA12__LCD_DATA12 0x0064 0x02D4 0x0668 0x6 0x0 +#define MX7D_PAD_EPDC_DATA12__LCD_DATA21 0x0064 0x02D4 0x068C 0x7 0x0 +#define MX7D_PAD_EPDC_DATA12__EPDC_GDCLK 0x0064 0x02D4 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA13__EPDC_DATA13 0x0068 0x02D8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA13__SIM2_PORT1_TRXD 0x0068 0x02D8 0x06EC 0x1 0x0 +#define MX7D_PAD_EPDC_DATA13__QSPI_B_SCLK 0x0068 0x02D8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x0068 0x02D8 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA13__UART7_DTE_RX 0x0068 0x02D8 0x0724 0x3 0x1 +#define MX7D_PAD_EPDC_DATA13__EIM_WAIT 0x0068 0x02D8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x0068 0x02D8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA13__LCD_DATA13 0x0068 0x02D8 0x066C 0x6 0x0 +#define MX7D_PAD_EPDC_DATA13__LCD_CS 0x0068 0x02D8 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA13__EPDC_GDOE 0x0068 0x02D8 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA14__EPDC_DATA14 0x006C 0x02DC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA14__SIM2_PORT1_CLK 0x006C 0x02DC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA14__QSPI_B_SS0_B 0x006C 0x02DC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS 0x006C 0x02DC 0x0720 0x3 0x0 +#define MX7D_PAD_EPDC_DATA14__UART7_DTE_CTS 0x006C 0x02DC 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA14__EIM_EB_B0 0x006C 0x02DC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x006C 0x02DC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA14__LCD_DATA14 0x006C 0x02DC 0x0670 0x6 0x0 +#define MX7D_PAD_EPDC_DATA14__LCD_DATA22 0x006C 0x02DC 0x0690 0x7 0x0 +#define MX7D_PAD_EPDC_DATA14__EPDC_GDSP 0x006C 0x02DC 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA15__EPDC_DATA15 0x0070 0x02E0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA15__SIM2_PORT1_RST_B 0x0070 0x02E0 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA15__QSPI_B_SS1_B 0x0070 0x02E0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS 0x0070 0x02E0 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA15__UART7_DTE_RTS 0x0070 0x02E0 0x0720 0x3 0x1 +#define MX7D_PAD_EPDC_DATA15__EIM_CS1_B 0x0070 0x02E0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x0070 0x02E0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA15__LCD_DATA15 0x0070 0x02E0 0x0674 0x6 0x0 +#define MX7D_PAD_EPDC_DATA15__LCD_WR_RWN 0x0070 0x02E0 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA15__EPDC_PWR_COM 0x0070 0x02E0 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_SDCLK__EPDC_SDCLK 0x0074 0x02E4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCLK__SIM2_PORT2_SVEN 0x0074 0x02E4 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x0074 0x02E4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDCLK__KPP_ROW4 0x0074 0x02E4 0x0624 0x3 0x0 +#define MX7D_PAD_EPDC_SDCLK__EIM_AD10 0x0074 0x02E4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x0074 0x02E4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCLK__LCD_CLK 0x0074 0x02E4 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_SDCLK__LCD_DATA20 0x0074 0x02E4 0x0688 0x7 0x0 +#define MX7D_PAD_EPDC_SDLE__EPDC_SDLE 0x0078 0x02E8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDLE__SIM2_PORT2_PD 0x0078 0x02E8 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x0078 0x02E8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDLE__KPP_COL4 0x0078 0x02E8 0x0604 0x3 0x0 +#define MX7D_PAD_EPDC_SDLE__EIM_AD11 0x0078 0x02E8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x0078 0x02E8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDLE__LCD_DATA16 0x0078 0x02E8 0x0678 0x6 0x0 +#define MX7D_PAD_EPDC_SDLE__LCD_DATA8 0x0078 0x02E8 0x0658 0x7 0x1 +#define MX7D_PAD_EPDC_SDOE__EPDC_SDOE 0x007C 0x02EC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDOE__FLEXTIMER1_CH0 0x007C 0x02EC 0x0584 0x1 0x0 +#define MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x007C 0x02EC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDOE__KPP_COL5 0x007C 0x02EC 0x0608 0x3 0x1 +#define MX7D_PAD_EPDC_SDOE__EIM_AD12 0x007C 0x02EC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x007C 0x02EC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDOE__LCD_DATA17 0x007C 0x02EC 0x067C 0x6 0x0 +#define MX7D_PAD_EPDC_SDOE__LCD_DATA23 0x007C 0x02EC 0x0694 0x7 0x0 +#define MX7D_PAD_EPDC_SDSHR__EPDC_SDSHR 0x0080 0x02F0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDSHR__FLEXTIMER1_CH1 0x0080 0x02F0 0x0588 0x1 0x0 +#define MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x0080 0x02F0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDSHR__KPP_ROW5 0x0080 0x02F0 0x0628 0x3 0x1 +#define MX7D_PAD_EPDC_SDSHR__EIM_AD13 0x0080 0x02F0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x0080 0x02F0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDSHR__LCD_DATA18 0x0080 0x02F0 0x0680 0x6 0x0 +#define MX7D_PAD_EPDC_SDSHR__LCD_DATA10 0x0080 0x02F0 0x0660 0x7 0x1 +#define MX7D_PAD_EPDC_SDCE0__EPDC_SDCE0 0x0084 0x02F4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCE0__FLEXTIMER1_CH2 0x0084 0x02F4 0x058C 0x1 0x0 +#define MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x0084 0x02F4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDCE0__EIM_AD14 0x0084 0x02F4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x0084 0x02F4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCE0__LCD_DATA19 0x0084 0x02F4 0x0684 0x6 0x0 +#define MX7D_PAD_EPDC_SDCE0__LCD_DATA5 0x0084 0x02F4 0x064C 0x7 0x1 +#define MX7D_PAD_EPDC_SDCE1__EPDC_SDCE1 0x0088 0x02F8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCE1__FLEXTIMER1_CH3 0x0088 0x02F8 0x0590 0x1 0x0 +#define MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x0088 0x02F8 0x0578 0x2 0x0 +#define MX7D_PAD_EPDC_SDCE1__ENET2_RX_ER 0x0088 0x02F8 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_SDCE1__EIM_AD15 0x0088 0x02F8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x0088 0x02F8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCE1__LCD_DATA20 0x0088 0x02F8 0x0688 0x6 0x1 +#define MX7D_PAD_EPDC_SDCE1__LCD_DATA4 0x0088 0x02F8 0x0648 0x7 0x1 +#define MX7D_PAD_EPDC_SDCE2__EPDC_SDCE2 0x008C 0x02FC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCE2__SIM2_PORT1_SVEN 0x008C 0x02FC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x008C 0x02FC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDCE2__KPP_COL6 0x008C 0x02FC 0x060C 0x3 0x1 +#define MX7D_PAD_EPDC_SDCE2__EIM_ADDR16 0x008C 0x02FC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x008C 0x02FC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCE2__LCD_DATA21 0x008C 0x02FC 0x068C 0x6 0x1 +#define MX7D_PAD_EPDC_SDCE2__LCD_DATA3 0x008C 0x02FC 0x0644 0x7 0x1 +#define MX7D_PAD_EPDC_SDCE3__EPDC_SDCE3 0x0090 0x0300 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCE3__SIM2_PORT1_PD 0x0090 0x0300 0x06E8 0x1 0x0 +#define MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x0090 0x0300 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDCE3__KPP_ROW6 0x0090 0x0300 0x062C 0x3 0x1 +#define MX7D_PAD_EPDC_SDCE3__EIM_ADDR17 0x0090 0x0300 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x0090 0x0300 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCE3__LCD_DATA22 0x0090 0x0300 0x0690 0x6 0x1 +#define MX7D_PAD_EPDC_SDCE3__LCD_DATA2 0x0090 0x0300 0x0640 0x7 0x1 +#define MX7D_PAD_EPDC_GDCLK__EPDC_GDCLK 0x0094 0x0304 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_GDCLK__FLEXTIMER2_CH0 0x0094 0x0304 0x05AC 0x1 0x0 +#define MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x0094 0x0304 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_GDCLK__KPP_COL7 0x0094 0x0304 0x0610 0x3 0x0 +#define MX7D_PAD_EPDC_GDCLK__EIM_ADDR18 0x0094 0x0304 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x0094 0x0304 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_GDCLK__LCD_DATA23 0x0094 0x0304 0x0694 0x6 0x1 +#define MX7D_PAD_EPDC_GDCLK__LCD_DATA16 0x0094 0x0304 0x0678 0x7 0x1 +#define MX7D_PAD_EPDC_GDOE__EPDC_GDOE 0x0098 0x0308 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_GDOE__FLEXTIMER2_CH1 0x0098 0x0308 0x05B0 0x1 0x0 +#define MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x0098 0x0308 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_GDOE__KPP_ROW7 0x0098 0x0308 0x0630 0x3 0x0 +#define MX7D_PAD_EPDC_GDOE__EIM_ADDR19 0x0098 0x0308 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x0098 0x0308 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_GDOE__LCD_WR_RWN 0x0098 0x0308 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_GDOE__LCD_DATA18 0x0098 0x0308 0x0680 0x7 0x1 +#define MX7D_PAD_EPDC_GDRL__EPDC_GDRL 0x009C 0x030C 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_GDRL__FLEXTIMER2_CH2 0x009C 0x030C 0x05B4 0x1 0x0 +#define MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x009C 0x030C 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_GDRL__EIM_ADDR20 0x009C 0x030C 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x009C 0x030C 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_GDRL__LCD_RD_E 0x009C 0x030C 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_GDRL__LCD_DATA19 0x009C 0x030C 0x0684 0x7 0x1 +#define MX7D_PAD_EPDC_GDSP__EPDC_GDSP 0x00A0 0x0310 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_GDSP__FLEXTIMER2_CH3 0x00A0 0x0310 0x05B8 0x1 0x0 +#define MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x00A0 0x0310 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_GDSP__ENET2_TX_ER 0x00A0 0x0310 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_GDSP__EIM_ADDR21 0x00A0 0x0310 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x00A0 0x0310 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_GDSP__LCD_BUSY 0x00A0 0x0310 0x0634 0x6 0x1 +#define MX7D_PAD_EPDC_GDSP__LCD_DATA17 0x00A0 0x0310 0x067C 0x7 0x1 +#define MX7D_PAD_EPDC_BDR0__EPDC_BDR0 0x00A4 0x0314 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_BDR0__ENET2_TX_CLK 0x00A4 0x0314 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_BDR0__CCM_ENET_REF_CLK2 0x00A4 0x0314 0x0570 0x3 0x1 +#define MX7D_PAD_EPDC_BDR0__EIM_ADDR22 0x00A4 0x0314 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x00A4 0x0314 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_BDR0__LCD_CS 0x00A4 0x0314 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_BDR0__LCD_DATA7 0x00A4 0x0314 0x0654 0x7 0x1 +#define MX7D_PAD_EPDC_BDR1__EPDC_BDR1 0x00A8 0x0318 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_BDR1__EPDC_SDCLKN 0x00A8 0x0318 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_BDR1__ENET2_RX_CLK 0x00A8 0x0318 0x0578 0x2 0x1 +#define MX7D_PAD_EPDC_BDR1__EIM_AD8 0x00A8 0x0318 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x00A8 0x0318 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_BDR1__LCD_ENABLE 0x00A8 0x0318 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_BDR1__LCD_DATA6 0x00A8 0x0318 0x0650 0x7 0x1 +#define MX7D_PAD_EPDC_PWR_COM__EPDC_PWR_COM 0x00AC 0x031C 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_PWR_COM__FLEXTIMER2_PHA 0x00AC 0x031C 0x05CC 0x1 0x0 +#define MX7D_PAD_EPDC_PWR_COM__ENET2_CRS 0x00AC 0x031C 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_PWR_COM__EIM_AD9 0x00AC 0x031C 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x00AC 0x031C 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_PWR_COM__LCD_HSYNC 0x00AC 0x031C 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_PWR_COM__LCD_DATA11 0x00AC 0x031C 0x0664 0x7 0x1 +#define MX7D_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT 0x00B0 0x0320 0x0580 0x0 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__FLEXTIMER2_PHB 0x00B0 0x0320 0x05D0 0x1 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__ENET2_COL 0x00B0 0x0320 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__EIM_EB_B1 0x00B0 0x0320 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x00B0 0x0320 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__LCD_VSYNC 0x00B0 0x0320 0x0698 0x6 0x1 +#define MX7D_PAD_EPDC_PWR_STAT__LCD_DATA12 0x00B0 0x0320 0x0668 0x7 0x1 +#define MX7D_PAD_LCD_CLK__LCD_CLK 0x00B4 0x0324 0x0000 0x0 0x0 +#define MX7D_PAD_LCD_CLK__ECSPI4_MISO 0x00B4 0x0324 0x0558 0x1 0x0 +#define MX7D_PAD_LCD_CLK__ENET1_1588_EVENT2_IN 0x00B4 0x0324 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_CLK__CSI_DATA16 0x00B4 0x0324 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_CLK__UART2_DCE_RX 0x00B4 0x0324 0x06FC 0x4 0x0 +#define MX7D_PAD_LCD_CLK__UART2_DTE_TX 0x00B4 0x0324 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_CLK__GPIO3_IO0 0x00B4 0x0324 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x00B8 0x0328 0x0000 0x0 0x0 +#define MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI 0x00B8 0x0328 0x055C 0x1 0x0 +#define MX7D_PAD_LCD_ENABLE__ENET1_1588_EVENT3_IN 0x00B8 0x0328 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_ENABLE__CSI_DATA17 0x00B8 0x0328 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_ENABLE__UART2_DCE_TX 0x00B8 0x0328 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_ENABLE__UART2_DTE_RX 0x00B8 0x0328 0x06FC 0x4 0x1 +#define MX7D_PAD_LCD_ENABLE__GPIO3_IO1 0x00B8 0x0328 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x00BC 0x032C 0x0000 0x0 0x0 +#define MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK 0x00BC 0x032C 0x0554 0x1 0x0 +#define MX7D_PAD_LCD_HSYNC__ENET2_1588_EVENT2_IN 0x00BC 0x032C 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_HSYNC__CSI_DATA18 0x00BC 0x032C 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_HSYNC__UART2_DCE_RTS 0x00BC 0x032C 0x06F8 0x4 0x0 +#define MX7D_PAD_LCD_HSYNC__UART2_DTE_CTS 0x00BC 0x032C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_HSYNC__GPIO3_IO2 0x00BC 0x032C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x00C0 0x0330 0x0698 0x0 0x2 +#define MX7D_PAD_LCD_VSYNC__ECSPI4_SS0 0x00C0 0x0330 0x0560 0x1 0x0 +#define MX7D_PAD_LCD_VSYNC__ENET2_1588_EVENT3_IN 0x00C0 0x0330 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_VSYNC__CSI_DATA19 0x00C0 0x0330 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_VSYNC__UART2_DCE_CTS 0x00C0 0x0330 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_VSYNC__UART2_DTE_RTS 0x00C0 0x0330 0x06F8 0x4 0x1 +#define MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x00C0 0x0330 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_RESET__LCD_RESET 0x00C4 0x0334 0x0000 0x0 0x0 +#define MX7D_PAD_LCD_RESET__GPT1_COMPARE1 0x00C4 0x0334 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_RESET__ARM_PLATFORM_EVENTI 0x00C4 0x0334 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_RESET__CSI_FIELD 0x00C4 0x0334 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_RESET__EIM_DTACK_B 0x00C4 0x0334 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_RESET__GPIO3_IO4 0x00C4 0x0334 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA00__LCD_DATA0 0x00C8 0x0338 0x0638 0x0 0x2 +#define MX7D_PAD_LCD_DATA00__GPT1_COMPARE2 0x00C8 0x0338 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA00__CSI_DATA20 0x00C8 0x0338 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA00__EIM_DATA0 0x00C8 0x0338 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA00__GPIO3_IO5 0x00C8 0x0338 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA00__SRC_BOOT_CFG0 0x00C8 0x0338 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA01__LCD_DATA1 0x00CC 0x033C 0x063C 0x0 0x2 +#define MX7D_PAD_LCD_DATA01__GPT1_COMPARE3 0x00CC 0x033C 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA01__CSI_DATA21 0x00CC 0x033C 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA01__EIM_DATA1 0x00CC 0x033C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA01__GPIO3_IO6 0x00CC 0x033C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA01__SRC_BOOT_CFG1 0x00CC 0x033C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA02__LCD_DATA2 0x00D0 0x0340 0x0640 0x0 0x2 +#define MX7D_PAD_LCD_DATA02__GPT1_CLK 0x00D0 0x0340 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA02__CSI_DATA22 0x00D0 0x0340 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA02__EIM_DATA2 0x00D0 0x0340 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA02__GPIO3_IO7 0x00D0 0x0340 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA02__SRC_BOOT_CFG2 0x00D0 0x0340 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA03__LCD_DATA3 0x00D4 0x0344 0x0644 0x0 0x2 +#define MX7D_PAD_LCD_DATA03__GPT1_CAPTURE1 0x00D4 0x0344 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA03__CSI_DATA23 0x00D4 0x0344 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA03__EIM_DATA3 0x00D4 0x0344 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA03__GPIO3_IO8 0x00D4 0x0344 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA03__SRC_BOOT_CFG3 0x00D4 0x0344 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA04__LCD_DATA4 0x00D8 0x0348 0x0648 0x0 0x2 +#define MX7D_PAD_LCD_DATA04__GPT1_CAPTURE2 0x00D8 0x0348 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA04__CSI_VSYNC 0x00D8 0x0348 0x0520 0x3 0x0 +#define MX7D_PAD_LCD_DATA04__EIM_DATA4 0x00D8 0x0348 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA04__GPIO3_IO9 0x00D8 0x0348 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA04__SRC_BOOT_CFG4 0x00D8 0x0348 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA05__LCD_DATA5 0x00DC 0x034C 0x064C 0x0 0x2 +#define MX7D_PAD_LCD_DATA05__CSI_HSYNC 0x00DC 0x034C 0x0518 0x3 0x0 +#define MX7D_PAD_LCD_DATA05__EIM_DATA5 0x00DC 0x034C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA05__GPIO3_IO10 0x00DC 0x034C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA05__SRC_BOOT_CFG5 0x00DC 0x034C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA06__LCD_DATA6 0x00E0 0x0350 0x0650 0x0 0x2 +#define MX7D_PAD_LCD_DATA06__CSI_PIXCLK 0x00E0 0x0350 0x051C 0x3 0x0 +#define MX7D_PAD_LCD_DATA06__EIM_DATA6 0x00E0 0x0350 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA06__GPIO3_IO11 0x00E0 0x0350 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA06__SRC_BOOT_CFG6 0x00E0 0x0350 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA07__LCD_DATA7 0x00E4 0x0354 0x0654 0x0 0x2 +#define MX7D_PAD_LCD_DATA07__CSI_MCLK 0x00E4 0x0354 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA07__EIM_DATA7 0x00E4 0x0354 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA07__GPIO3_IO12 0x00E4 0x0354 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA07__SRC_BOOT_CFG7 0x00E4 0x0354 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA08__LCD_DATA8 0x00E8 0x0358 0x0658 0x0 0x2 +#define MX7D_PAD_LCD_DATA08__CSI_DATA9 0x00E8 0x0358 0x0514 0x3 0x0 +#define MX7D_PAD_LCD_DATA08__EIM_DATA8 0x00E8 0x0358 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA08__GPIO3_IO13 0x00E8 0x0358 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA08__SRC_BOOT_CFG8 0x00E8 0x0358 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA09__LCD_DATA9 0x00EC 0x035C 0x065C 0x0 0x2 +#define MX7D_PAD_LCD_DATA09__CSI_DATA8 0x00EC 0x035C 0x0510 0x3 0x0 +#define MX7D_PAD_LCD_DATA09__EIM_DATA9 0x00EC 0x035C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA09__GPIO3_IO14 0x00EC 0x035C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA09__SRC_BOOT_CFG9 0x00EC 0x035C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA10__LCD_DATA10 0x00F0 0x0360 0x0660 0x0 0x2 +#define MX7D_PAD_LCD_DATA10__CSI_DATA7 0x00F0 0x0360 0x050C 0x3 0x0 +#define MX7D_PAD_LCD_DATA10__EIM_DATA10 0x00F0 0x0360 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA10__GPIO3_IO15 0x00F0 0x0360 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA10__SRC_BOOT_CFG10 0x00F0 0x0360 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA11__LCD_DATA11 0x00F4 0x0364 0x0664 0x0 0x2 +#define MX7D_PAD_LCD_DATA11__CSI_DATA6 0x00F4 0x0364 0x0508 0x3 0x0 +#define MX7D_PAD_LCD_DATA11__EIM_DATA11 0x00F4 0x0364 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA11__GPIO3_IO16 0x00F4 0x0364 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA11__SRC_BOOT_CFG11 0x00F4 0x0364 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA12__LCD_DATA12 0x00F8 0x0368 0x0668 0x0 0x2 +#define MX7D_PAD_LCD_DATA12__CSI_DATA5 0x00F8 0x0368 0x0504 0x3 0x0 +#define MX7D_PAD_LCD_DATA12__EIM_DATA12 0x00F8 0x0368 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA12__GPIO3_IO17 0x00F8 0x0368 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA12__SRC_BOOT_CFG12 0x00F8 0x0368 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA13__LCD_DATA13 0x00FC 0x036C 0x066C 0x0 0x1 +#define MX7D_PAD_LCD_DATA13__CSI_DATA4 0x00FC 0x036C 0x0500 0x3 0x0 +#define MX7D_PAD_LCD_DATA13__EIM_DATA13 0x00FC 0x036C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA13__GPIO3_IO18 0x00FC 0x036C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA13__SRC_BOOT_CFG13 0x00FC 0x036C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA14__LCD_DATA14 0x0100 0x0370 0x0670 0x0 0x1 +#define MX7D_PAD_LCD_DATA14__CSI_DATA3 0x0100 0x0370 0x04FC 0x3 0x0 +#define MX7D_PAD_LCD_DATA14__EIM_DATA14 0x0100 0x0370 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA14__GPIO3_IO19 0x0100 0x0370 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA14__SRC_BOOT_CFG14 0x0100 0x0370 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA15__LCD_DATA15 0x0104 0x0374 0x0674 0x0 0x1 +#define MX7D_PAD_LCD_DATA15__CSI_DATA2 0x0104 0x0374 0x04F8 0x3 0x0 +#define MX7D_PAD_LCD_DATA15__EIM_DATA15 0x0104 0x0374 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA15__GPIO3_IO20 0x0104 0x0374 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA15__SRC_BOOT_CFG15 0x0104 0x0374 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA16__LCD_DATA16 0x0108 0x0378 0x0678 0x0 0x2 +#define MX7D_PAD_LCD_DATA16__FLEXTIMER1_CH4 0x0108 0x0378 0x0594 0x1 0x0 +#define MX7D_PAD_LCD_DATA16__CSI_DATA1 0x0108 0x0378 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA16__EIM_CRE 0x0108 0x0378 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA16__GPIO3_IO21 0x0108 0x0378 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA16__SRC_BOOT_CFG16 0x0108 0x0378 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA17__LCD_DATA17 0x010C 0x037C 0x067C 0x0 0x2 +#define MX7D_PAD_LCD_DATA17__FLEXTIMER1_CH5 0x010C 0x037C 0x0598 0x1 0x0 +#define MX7D_PAD_LCD_DATA17__CSI_DATA0 0x010C 0x037C 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA17__EIM_ACLK_FREERUN 0x010C 0x037C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA17__GPIO3_IO22 0x010C 0x037C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA17__SRC_BOOT_CFG17 0x010C 0x037C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA18__LCD_DATA18 0x0110 0x0380 0x0680 0x0 0x2 +#define MX7D_PAD_LCD_DATA18__FLEXTIMER1_CH6 0x0110 0x0380 0x059C 0x1 0x0 +#define MX7D_PAD_LCD_DATA18__ARM_PLATFORM_EVENTO 0x0110 0x0380 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA18__CSI_DATA15 0x0110 0x0380 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA18__EIM_CS2_B 0x0110 0x0380 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x0110 0x0380 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA18__SRC_BOOT_CFG18 0x0110 0x0380 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA19__EIM_CS3_B 0x0114 0x0384 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x0114 0x0384 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA19__SRC_BOOT_CFG19 0x0114 0x0384 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA19__LCD_DATA19 0x0114 0x0384 0x0684 0x0 0x2 +#define MX7D_PAD_LCD_DATA19__FLEXTIMER1_CH7 0x0114 0x0384 0x05A0 0x1 0x0 +#define MX7D_PAD_LCD_DATA19__CSI_DATA14 0x0114 0x0384 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA20__EIM_ADDR23 0x0118 0x0388 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x0118 0x0388 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA20__I2C3_SCL 0x0118 0x0388 0x05E4 0x6 0x1 +#define MX7D_PAD_LCD_DATA20__LCD_DATA20 0x0118 0x0388 0x0688 0x0 0x2 +#define MX7D_PAD_LCD_DATA20__FLEXTIMER2_CH4 0x0118 0x0388 0x05BC 0x1 0x0 +#define MX7D_PAD_LCD_DATA20__ENET1_1588_EVENT2_OUT 0x0118 0x0388 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA20__CSI_DATA13 0x0118 0x0388 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA21__LCD_DATA21 0x011C 0x038C 0x068C 0x0 0x2 +#define MX7D_PAD_LCD_DATA21__FLEXTIMER2_CH5 0x011C 0x038C 0x05C0 0x1 0x0 +#define MX7D_PAD_LCD_DATA21__ENET1_1588_EVENT3_OUT 0x011C 0x038C 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA21__CSI_DATA12 0x011C 0x038C 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA21__EIM_ADDR24 0x011C 0x038C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x011C 0x038C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA21__I2C3_SDA 0x011C 0x038C 0x05E8 0x6 0x1 +#define MX7D_PAD_LCD_DATA22__LCD_DATA22 0x0120 0x0390 0x0690 0x0 0x2 +#define MX7D_PAD_LCD_DATA22__FLEXTIMER2_CH6 0x0120 0x0390 0x05C4 0x1 0x0 +#define MX7D_PAD_LCD_DATA22__ENET2_1588_EVENT2_OUT 0x0120 0x0390 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA22__CSI_DATA11 0x0120 0x0390 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA22__EIM_ADDR25 0x0120 0x0390 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x0120 0x0390 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA22__I2C4_SCL 0x0120 0x0390 0x05EC 0x6 0x1 +#define MX7D_PAD_LCD_DATA23__LCD_DATA23 0x0124 0x0394 0x0694 0x0 0x2 +#define MX7D_PAD_LCD_DATA23__FLEXTIMER2_CH7 0x0124 0x0394 0x05C8 0x1 0x0 +#define MX7D_PAD_LCD_DATA23__ENET2_1588_EVENT3_OUT 0x0124 0x0394 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA23__CSI_DATA10 0x0124 0x0394 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA23__EIM_ADDR26 0x0124 0x0394 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x0124 0x0394 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA23__I2C4_SDA 0x0124 0x0394 0x05F0 0x6 0x1 +#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0128 0x0398 0x0000 0x0 0x0 +#define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0128 0x0398 0x0000 0x0 0x0 +#define MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x0128 0x0398 0x05D4 0x1 0x0 +#define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY 0x0128 0x0398 0x0000 0x2 0x0 +#define MX7D_PAD_UART1_RX_DATA__ECSPI1_SS1 0x0128 0x0398 0x0000 0x3 0x0 +#define MX7D_PAD_UART1_RX_DATA__ENET2_1588_EVENT0_IN 0x0128 0x0398 0x0000 0x4 0x0 +#define MX7D_PAD_UART1_RX_DATA__GPIO4_IO0 0x0128 0x0398 0x0000 0x5 0x0 +#define MX7D_PAD_UART1_RX_DATA__ENET1_MDIO 0x0128 0x0398 0x0000 0x6 0x0 +#define MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x012C 0x039C 0x0000 0x0 0x0 +#define MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x012C 0x039C 0x06F4 0x0 0x1 +#define MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x012C 0x039C 0x05D8 0x1 0x0 +#define MX7D_PAD_UART1_TX_DATA__SAI3_MCLK 0x012C 0x039C 0x0000 0x2 0x0 +#define MX7D_PAD_UART1_TX_DATA__ECSPI1_SS2 0x012C 0x039C 0x0000 0x3 0x0 +#define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT 0x012C 0x039C 0x0000 0x4 0x0 +#define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x012C 0x039C 0x0000 0x5 0x0 +#define MX7D_PAD_UART1_TX_DATA__ENET1_MDC 0x012C 0x039C 0x0000 0x6 0x0 +#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0130 0x03A0 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x0130 0x03A0 0x05DC 0x1 0x0 +#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x0000 0x2 0x0 +#define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3 0x0130 0x03A0 0x0000 0x3 0x0 +#define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN 0x0130 0x03A0 0x0000 0x4 0x0 +#define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0 +#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0000 0x6 0x0 +#define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0134 0x03A4 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x0134 0x03A4 0x05E0 0x1 0x0 +#define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0 0x0134 0x03A4 0x06C8 0x2 0x0 +#define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY 0x0134 0x03A4 0x0000 0x3 0x0 +#define MX7D_PAD_UART2_TX_DATA__ENET2_1588_EVENT1_OUT 0x0134 0x03A4 0x0000 0x4 0x0 +#define MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x0134 0x03A4 0x0000 0x5 0x0 +#define MX7D_PAD_UART2_TX_DATA__ENET2_MDC 0x0134 0x03A4 0x0000 0x6 0x0 +#define MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x0138 0x03A8 0x0704 0x0 0x2 +#define MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x0138 0x03A8 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_RX_DATA__USB_OTG1_OC 0x0138 0x03A8 0x072C 0x1 0x0 +#define MX7D_PAD_UART3_RX_DATA__SAI3_RX_SYNC 0x0138 0x03A8 0x06CC 0x2 0x0 +#define MX7D_PAD_UART3_RX_DATA__ECSPI1_MISO 0x0138 0x03A8 0x0528 0x3 0x0 +#define MX7D_PAD_UART3_RX_DATA__ENET1_1588_EVENT0_IN 0x0138 0x03A8 0x0000 0x4 0x0 +#define MX7D_PAD_UART3_RX_DATA__GPIO4_IO4 0x0138 0x03A8 0x0000 0x5 0x0 +#define MX7D_PAD_UART3_RX_DATA__SD1_LCTL 0x0138 0x03A8 0x0000 0x6 0x0 +#define MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x013C 0x03AC 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x013C 0x03AC 0x0704 0x0 0x3 +#define MX7D_PAD_UART3_TX_DATA__USB_OTG1_PWR 0x013C 0x03AC 0x0000 0x1 0x0 +#define MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x013C 0x03AC 0x06D0 0x2 0x0 +#define MX7D_PAD_UART3_TX_DATA__ECSPI1_MOSI 0x013C 0x03AC 0x052C 0x3 0x0 +#define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT 0x013C 0x03AC 0x0000 0x4 0x0 +#define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x013C 0x03AC 0x0000 0x5 0x0 +#define MX7D_PAD_UART3_TX_DATA__SD2_LCTL 0x013C 0x03AC 0x0000 0x6 0x0 +#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x0140 0x03B0 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS 0x0140 0x03B0 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x0140 0x03B0 0x0728 0x1 0x0 +#define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x0140 0x03B0 0x0000 0x2 0x0 +#define MX7D_PAD_UART3_RTS_B__ECSPI1_SCLK 0x0140 0x03B0 0x0000 0x3 0x0 +#define MX7D_PAD_UART3_RTS_B__ENET1_1588_EVENT1_IN 0x0140 0x03B0 0x0000 0x4 0x0 +#define MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x0140 0x03B0 0x0000 0x5 0x0 +#define MX7D_PAD_UART3_RTS_B__SD3_LCTL 0x0140 0x03B0 0x0000 0x6 0x0 +#define MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x0144 0x03B4 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_CTS_B__UART3_DTE_RTS 0x0144 0x03B4 0x0700 0x0 0x3 +#define MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR 0x0144 0x03B4 0x0000 0x1 0x0 +#define MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x0144 0x03B4 0x06D4 0x2 0x0 +#define MX7D_PAD_UART3_CTS_B__ECSPI1_SS0 0x0144 0x03B4 0x0530 0x3 0x0 +#define MX7D_PAD_UART3_CTS_B__ENET1_1588_EVENT1_OUT 0x0144 0x03B4 0x0000 0x4 0x0 +#define MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x0144 0x03B4 0x0000 0x5 0x0 +#define MX7D_PAD_UART3_CTS_B__SD1_VSELECT 0x0144 0x03B4 0x0000 0x6 0x0 +#define MX7D_PAD_I2C1_SCL__I2C1_SCL 0x0148 0x03B8 0x05D4 0x0 0x1 +#define MX7D_PAD_I2C1_SCL__UART4_DCE_CTS 0x0148 0x03B8 0x0000 0x1 0x0 +#define MX7D_PAD_I2C1_SCL__UART4_DTE_RTS 0x0148 0x03B8 0x0708 0x1 0x0 +#define MX7D_PAD_I2C1_SCL__FLEXCAN1_RX 0x0148 0x03B8 0x04DC 0x2 0x1 +#define MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x0148 0x03B8 0x0548 0x3 0x0 +#define MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x0148 0x03B8 0x0000 0x5 0x0 +#define MX7D_PAD_I2C1_SCL__SD2_VSELECT 0x0148 0x03B8 0x0000 0x6 0x0 +#define MX7D_PAD_I2C1_SDA__I2C1_SDA 0x014C 0x03BC 0x05D8 0x0 0x1 +#define MX7D_PAD_I2C1_SDA__UART4_DCE_RTS 0x014C 0x03BC 0x0708 0x1 0x1 +#define MX7D_PAD_I2C1_SDA__UART4_DTE_CTS 0x014C 0x03BC 0x0000 0x1 0x0 +#define MX7D_PAD_I2C1_SDA__FLEXCAN1_TX 0x014C 0x03BC 0x0000 0x2 0x0 +#define MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x014C 0x03BC 0x054C 0x3 0x0 +#define MX7D_PAD_I2C1_SDA__CCM_ENET_REF_CLK1 0x014C 0x03BC 0x0564 0x4 0x1 +#define MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x014C 0x03BC 0x0000 0x5 0x0 +#define MX7D_PAD_I2C1_SDA__SD3_VSELECT 0x014C 0x03BC 0x0000 0x6 0x0 +#define MX7D_PAD_I2C2_SCL__I2C2_SCL 0x0150 0x03C0 0x05DC 0x0 0x1 +#define MX7D_PAD_I2C2_SCL__UART4_DCE_RX 0x0150 0x03C0 0x070C 0x1 0x0 +#define MX7D_PAD_I2C2_SCL__UART4_DTE_TX 0x0150 0x03C0 0x0000 0x1 0x0 +#define MX7D_PAD_I2C2_SCL__WDOG3_WDOG_B 0x0150 0x03C0 0x0000 0x2 0x0 +#define MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x0150 0x03C0 0x0544 0x3 0x0 +#define MX7D_PAD_I2C2_SCL__CCM_ENET_REF_CLK2 0x0150 0x03C0 0x0570 0x4 0x2 +#define MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x0150 0x03C0 0x0000 0x5 0x0 +#define MX7D_PAD_I2C2_SCL__SD3_CD_B 0x0150 0x03C0 0x0738 0x6 0x1 +#define MX7D_PAD_I2C2_SDA__I2C2_SDA 0x0154 0x03C4 0x05E0 0x0 0x1 +#define MX7D_PAD_I2C2_SDA__UART4_DCE_TX 0x0154 0x03C4 0x0000 0x1 0x0 +#define MX7D_PAD_I2C2_SDA__UART4_DTE_RX 0x0154 0x03C4 0x070C 0x1 0x1 +#define MX7D_PAD_I2C2_SDA__WDOG3_WDOG_RST_B_DEB 0x0154 0x03C4 0x0000 0x2 0x0 +#define MX7D_PAD_I2C2_SDA__ECSPI3_SS0 0x0154 0x03C4 0x0550 0x3 0x0 +#define MX7D_PAD_I2C2_SDA__CCM_ENET_REF_CLK3 0x0154 0x03C4 0x0000 0x4 0x0 +#define MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x0154 0x03C4 0x0000 0x5 0x0 +#define MX7D_PAD_I2C2_SDA__SD3_WP 0x0154 0x03C4 0x073C 0x6 0x1 +#define MX7D_PAD_I2C3_SCL__I2C3_SCL 0x0158 0x03C8 0x05E4 0x0 0x2 +#define MX7D_PAD_I2C3_SCL__UART5_DCE_CTS 0x0158 0x03C8 0x0000 0x1 0x0 +#define MX7D_PAD_I2C3_SCL__UART5_DTE_RTS 0x0158 0x03C8 0x0710 0x1 0x0 +#define MX7D_PAD_I2C3_SCL__FLEXCAN2_RX 0x0158 0x03C8 0x04E0 0x2 0x1 +#define MX7D_PAD_I2C3_SCL__CSI_VSYNC 0x0158 0x03C8 0x0520 0x3 0x1 +#define MX7D_PAD_I2C3_SCL__SDMA_EXT_EVENT0 0x0158 0x03C8 0x06D8 0x4 0x1 +#define MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x0158 0x03C8 0x0000 0x5 0x0 +#define MX7D_PAD_I2C3_SCL__EPDC_BDR0 0x0158 0x03C8 0x0000 0x6 0x0 +#define MX7D_PAD_I2C3_SDA__I2C3_SDA 0x015C 0x03CC 0x05E8 0x0 0x2 +#define MX7D_PAD_I2C3_SDA__UART5_DCE_RTS 0x015C 0x03CC 0x0710 0x1 0x1 +#define MX7D_PAD_I2C3_SDA__UART5_DTE_CTS 0x015C 0x03CC 0x0000 0x1 0x0 +#define MX7D_PAD_I2C3_SDA__FLEXCAN2_TX 0x015C 0x03CC 0x0000 0x2 0x0 +#define MX7D_PAD_I2C3_SDA__CSI_HSYNC 0x015C 0x03CC 0x0518 0x3 0x1 +#define MX7D_PAD_I2C3_SDA__SDMA_EXT_EVENT1 0x015C 0x03CC 0x06DC 0x4 0x1 +#define MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x015C 0x03CC 0x0000 0x5 0x0 +#define MX7D_PAD_I2C3_SDA__EPDC_BDR1 0x015C 0x03CC 0x0000 0x6 0x0 +#define MX7D_PAD_I2C4_SCL__I2C4_SCL 0x0160 0x03D0 0x05EC 0x0 0x2 +#define MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x0160 0x03D0 0x0714 0x1 0x0 +#define MX7D_PAD_I2C4_SCL__UART5_DTE_TX 0x0160 0x03D0 0x0000 0x1 0x0 +#define MX7D_PAD_I2C4_SCL__WDOG4_WDOG_B 0x0160 0x03D0 0x0000 0x2 0x0 +#define MX7D_PAD_I2C4_SCL__CSI_PIXCLK 0x0160 0x03D0 0x051C 0x3 0x1 +#define MX7D_PAD_I2C4_SCL__USB_OTG1_ID 0x0160 0x03D0 0x0734 0x4 0x1 +#define MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x0160 0x03D0 0x0000 0x5 0x0 +#define MX7D_PAD_I2C4_SCL__EPDC_VCOM0 0x0160 0x03D0 0x0000 0x6 0x0 +#define MX7D_PAD_I2C4_SDA__I2C4_SDA 0x0164 0x03D4 0x05F0 0x0 0x2 +#define MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x0164 0x03D4 0x0000 0x1 0x0 +#define MX7D_PAD_I2C4_SDA__UART5_DTE_RX 0x0164 0x03D4 0x0714 0x1 0x1 +#define MX7D_PAD_I2C4_SDA__WDOG4_WDOG_RST_B_DEB 0x0164 0x03D4 0x0000 0x2 0x0 +#define MX7D_PAD_I2C4_SDA__CSI_MCLK 0x0164 0x03D4 0x0000 0x3 0x0 +#define MX7D_PAD_I2C4_SDA__USB_OTG2_ID 0x0164 0x03D4 0x0730 0x4 0x1 +#define MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x0164 0x03D4 0x0000 0x5 0x0 +#define MX7D_PAD_I2C4_SDA__EPDC_VCOM1 0x0164 0x03D4 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x0168 0x03D8 0x0524 0x0 0x1 +#define MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x0168 0x03D8 0x071C 0x1 0x2 +#define MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX 0x0168 0x03D8 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI1_SCLK__SD2_DATA4 0x0168 0x03D8 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI1_SCLK__CSI_DATA2 0x0168 0x03D8 0x04F8 0x3 0x1 +#define MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x0168 0x03D8 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI1_SCLK__EPDC_PWR_COM 0x0168 0x03D8 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x016C 0x03DC 0x052C 0x0 0x1 +#define MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x016C 0x03DC 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX 0x016C 0x03DC 0x071C 0x1 0x3 +#define MX7D_PAD_ECSPI1_MOSI__SD2_DATA5 0x016C 0x03DC 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI1_MOSI__CSI_DATA3 0x016C 0x03DC 0x04FC 0x3 0x1 +#define MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x016C 0x03DC 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI1_MOSI__EPDC_PWR_STAT 0x016C 0x03DC 0x0580 0x6 0x1 +#define MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x0170 0x03E0 0x0528 0x0 0x1 +#define MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x0170 0x03E0 0x0718 0x1 0x2 +#define MX7D_PAD_ECSPI1_MISO__UART6_DTE_CTS 0x0170 0x03E0 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI1_MISO__SD2_DATA6 0x0170 0x03E0 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI1_MISO__CSI_DATA4 0x0170 0x03E0 0x0500 0x3 0x1 +#define MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x0170 0x03E0 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI1_MISO__EPDC_PWR_IRQ 0x0170 0x03E0 0x057C 0x6 0x0 +#define MX7D_PAD_ECSPI1_SS0__ECSPI1_SS0 0x0174 0x03E4 0x0530 0x0 0x1 +#define MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x0174 0x03E4 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI1_SS0__UART6_DTE_RTS 0x0174 0x03E4 0x0718 0x1 0x3 +#define MX7D_PAD_ECSPI1_SS0__SD2_DATA7 0x0174 0x03E4 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI1_SS0__CSI_DATA5 0x0174 0x03E4 0x0504 0x3 0x1 +#define MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x0174 0x03E4 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI1_SS0__EPDC_PWR_CTRL3 0x0174 0x03E4 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x0178 0x03E8 0x0534 0x0 0x0 +#define MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX 0x0178 0x03E8 0x0724 0x1 0x2 +#define MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX 0x0178 0x03E8 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI2_SCLK__SD1_DATA4 0x0178 0x03E8 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI2_SCLK__CSI_DATA6 0x0178 0x03E8 0x0508 0x3 0x1 +#define MX7D_PAD_ECSPI2_SCLK__LCD_DATA13 0x0178 0x03E8 0x066C 0x4 0x2 +#define MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x0178 0x03E8 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI2_SCLK__EPDC_PWR_CTRL0 0x0178 0x03E8 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x017C 0x03EC 0x053C 0x0 0x0 +#define MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX 0x017C 0x03EC 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX 0x017C 0x03EC 0x0724 0x1 0x3 +#define MX7D_PAD_ECSPI2_MOSI__SD1_DATA5 0x017C 0x03EC 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI2_MOSI__CSI_DATA7 0x017C 0x03EC 0x050C 0x3 0x1 +#define MX7D_PAD_ECSPI2_MOSI__LCD_DATA14 0x017C 0x03EC 0x0670 0x4 0x2 +#define MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x017C 0x03EC 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI2_MOSI__EPDC_PWR_CTRL1 0x017C 0x03EC 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x0180 0x03F0 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI2_MISO__EPDC_PWR_CTRL2 0x0180 0x03F0 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x0180 0x03F0 0x0538 0x0 0x0 +#define MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS 0x0180 0x03F0 0x0720 0x1 0x2 +#define MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS 0x0180 0x03F0 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI2_MISO__SD1_DATA6 0x0180 0x03F0 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI2_MISO__CSI_DATA8 0x0180 0x03F0 0x0510 0x3 0x1 +#define MX7D_PAD_ECSPI2_MISO__LCD_DATA15 0x0180 0x03F0 0x0674 0x4 0x2 +#define MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0 0x0184 0x03F4 0x0540 0x0 0x0 +#define MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS 0x0184 0x03F4 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS 0x0184 0x03F4 0x0720 0x1 0x3 +#define MX7D_PAD_ECSPI2_SS0__SD1_DATA7 0x0184 0x03F4 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI2_SS0__CSI_DATA9 0x0184 0x03F4 0x0514 0x3 0x1 +#define MX7D_PAD_ECSPI2_SS0__LCD_RESET 0x0184 0x03F4 0x0000 0x4 0x0 +#define MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x0184 0x03F4 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI2_SS0__EPDC_PWR_WAKE 0x0184 0x03F4 0x0000 0x6 0x0 +#define MX7D_PAD_SD1_CD_B__SD1_CD_B 0x0188 0x03F8 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_CD_B__UART6_DCE_RX 0x0188 0x03F8 0x071C 0x2 0x4 +#define MX7D_PAD_SD1_CD_B__UART6_DTE_TX 0x0188 0x03F8 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_CD_B__ECSPI4_MISO 0x0188 0x03F8 0x0558 0x3 0x1 +#define MX7D_PAD_SD1_CD_B__FLEXTIMER1_CH0 0x0188 0x03F8 0x0584 0x4 0x1 +#define MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x0188 0x03F8 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_CD_B__CCM_CLKO1 0x0188 0x03F8 0x0000 0x6 0x0 +#define MX7D_PAD_SD1_WP__SD1_WP 0x018C 0x03FC 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_WP__UART6_DCE_TX 0x018C 0x03FC 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_WP__UART6_DTE_RX 0x018C 0x03FC 0x071C 0x2 0x5 +#define MX7D_PAD_SD1_WP__ECSPI4_MOSI 0x018C 0x03FC 0x055C 0x3 0x1 +#define MX7D_PAD_SD1_WP__FLEXTIMER1_CH1 0x018C 0x03FC 0x0588 0x4 0x1 +#define MX7D_PAD_SD1_WP__GPIO5_IO1 0x018C 0x03FC 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_WP__CCM_CLKO2 0x018C 0x03FC 0x0000 0x6 0x0 +#define MX7D_PAD_SD1_RESET_B__SD1_RESET_B 0x0190 0x0400 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_RESET_B__SAI3_MCLK 0x0190 0x0400 0x0000 0x1 0x0 +#define MX7D_PAD_SD1_RESET_B__UART6_DCE_RTS 0x0190 0x0400 0x0718 0x2 0x4 +#define MX7D_PAD_SD1_RESET_B__UART6_DTE_CTS 0x0190 0x0400 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_RESET_B__ECSPI4_SCLK 0x0190 0x0400 0x0554 0x3 0x1 +#define MX7D_PAD_SD1_RESET_B__FLEXTIMER1_CH2 0x0190 0x0400 0x058C 0x4 0x1 +#define MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x0190 0x0400 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_CLK__SD1_CLK 0x0194 0x0404 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_CLK__SAI3_RX_SYNC 0x0194 0x0404 0x06CC 0x1 0x1 +#define MX7D_PAD_SD1_CLK__UART6_DCE_CTS 0x0194 0x0404 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_CLK__UART6_DTE_RTS 0x0194 0x0404 0x0718 0x2 0x5 +#define MX7D_PAD_SD1_CLK__ECSPI4_SS0 0x0194 0x0404 0x0560 0x3 0x1 +#define MX7D_PAD_SD1_CLK__FLEXTIMER1_CH3 0x0194 0x0404 0x0590 0x4 0x1 +#define MX7D_PAD_SD1_CLK__GPIO5_IO3 0x0194 0x0404 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_CMD__SD1_CMD 0x0198 0x0408 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_CMD__SAI3_RX_BCLK 0x0198 0x0408 0x06C4 0x1 0x1 +#define MX7D_PAD_SD1_CMD__ECSPI4_SS1 0x0198 0x0408 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_CMD__FLEXTIMER2_CH0 0x0198 0x0408 0x05AC 0x4 0x1 +#define MX7D_PAD_SD1_CMD__GPIO5_IO4 0x0198 0x0408 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA0__SD1_DATA0 0x019C 0x040C 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_DATA0__SAI3_RX_DATA0 0x019C 0x040C 0x06C8 0x1 0x1 +#define MX7D_PAD_SD1_DATA0__UART7_DCE_RX 0x019C 0x040C 0x0724 0x2 0x4 +#define MX7D_PAD_SD1_DATA0__UART7_DTE_TX 0x019C 0x040C 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_DATA0__ECSPI4_SS2 0x019C 0x040C 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_DATA0__FLEXTIMER2_CH1 0x019C 0x040C 0x05B0 0x4 0x1 +#define MX7D_PAD_SD1_DATA0__GPIO5_IO5 0x019C 0x040C 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA0__CCM_EXT_CLK1 0x019C 0x040C 0x04E4 0x6 0x1 +#define MX7D_PAD_SD1_DATA1__SD1_DATA1 0x01A0 0x0410 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK 0x01A0 0x0410 0x06D0 0x1 0x1 +#define MX7D_PAD_SD1_DATA1__UART7_DCE_TX 0x01A0 0x0410 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_DATA1__UART7_DTE_RX 0x01A0 0x0410 0x0724 0x2 0x5 +#define MX7D_PAD_SD1_DATA1__ECSPI4_SS3 0x01A0 0x0410 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_DATA1__FLEXTIMER2_CH2 0x01A0 0x0410 0x05B4 0x4 0x1 +#define MX7D_PAD_SD1_DATA1__GPIO5_IO6 0x01A0 0x0410 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA1__CCM_EXT_CLK2 0x01A0 0x0410 0x04E8 0x6 0x1 +#define MX7D_PAD_SD1_DATA2__SD1_DATA2 0x01A4 0x0414 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC 0x01A4 0x0414 0x06D4 0x1 0x1 +#define MX7D_PAD_SD1_DATA2__UART7_DCE_CTS 0x01A4 0x0414 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_DATA2__UART7_DTE_RTS 0x01A4 0x0414 0x0720 0x2 0x4 +#define MX7D_PAD_SD1_DATA2__ECSPI4_RDY 0x01A4 0x0414 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_DATA2__FLEXTIMER2_CH3 0x01A4 0x0414 0x05B8 0x4 0x1 +#define MX7D_PAD_SD1_DATA2__GPIO5_IO7 0x01A4 0x0414 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA2__CCM_EXT_CLK3 0x01A4 0x0414 0x04EC 0x6 0x1 +#define MX7D_PAD_SD1_DATA3__SD1_DATA3 0x01A8 0x0418 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0 0x01A8 0x0418 0x0000 0x1 0x0 +#define MX7D_PAD_SD1_DATA3__UART7_DCE_RTS 0x01A8 0x0418 0x0720 0x2 0x5 +#define MX7D_PAD_SD1_DATA3__UART7_DTE_CTS 0x01A8 0x0418 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_DATA3__ECSPI3_SS1 0x01A8 0x0418 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_DATA3__FLEXTIMER1_PHA 0x01A8 0x0418 0x05A4 0x4 0x1 +#define MX7D_PAD_SD1_DATA3__GPIO5_IO8 0x01A8 0x0418 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA3__CCM_EXT_CLK4 0x01A8 0x0418 0x04F0 0x6 0x1 +#define MX7D_PAD_SD2_CD_B__SD2_CD_B 0x01AC 0x041C 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x01AC 0x041C 0x0568 0x1 0x2 +#define MX7D_PAD_SD2_CD_B__ENET2_MDIO 0x01AC 0x041C 0x0574 0x2 0x2 +#define MX7D_PAD_SD2_CD_B__ECSPI3_SS2 0x01AC 0x041C 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_CD_B__FLEXTIMER1_PHB 0x01AC 0x041C 0x05A8 0x4 0x1 +#define MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x01AC 0x041C 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_CD_B__SDMA_EXT_EVENT0 0x01AC 0x041C 0x06D8 0x6 0x2 +#define MX7D_PAD_SD2_WP__SD2_WP 0x01B0 0x0420 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_WP__ENET1_MDC 0x01B0 0x0420 0x0000 0x1 0x0 +#define MX7D_PAD_SD2_WP__ENET2_MDC 0x01B0 0x0420 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_WP__ECSPI3_SS3 0x01B0 0x0420 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_WP__USB_OTG1_ID 0x01B0 0x0420 0x0734 0x4 0x2 +#define MX7D_PAD_SD2_WP__GPIO5_IO10 0x01B0 0x0420 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_WP__SDMA_EXT_EVENT1 0x01B0 0x0420 0x06DC 0x6 0x2 +#define MX7D_PAD_SD2_RESET_B__SD2_RESET_B 0x01B4 0x0424 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_RESET_B__SAI2_MCLK 0x01B4 0x0424 0x0000 0x1 0x0 +#define MX7D_PAD_SD2_RESET_B__SD2_RESET 0x01B4 0x0424 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_RESET_B__ECSPI3_RDY 0x01B4 0x0424 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_RESET_B__USB_OTG2_ID 0x01B4 0x0424 0x0730 0x4 0x2 +#define MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x01B4 0x0424 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_CLK__SD2_CLK 0x01B8 0x0428 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_CLK__SAI2_RX_SYNC 0x01B8 0x0428 0x06B8 0x1 0x0 +#define MX7D_PAD_SD2_CLK__MQS_RIGHT 0x01B8 0x0428 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_CLK__GPT4_CLK 0x01B8 0x0428 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_CLK__GPIO5_IO12 0x01B8 0x0428 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_CMD__SD2_CMD 0x01BC 0x042C 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_CMD__SAI2_RX_BCLK 0x01BC 0x042C 0x06B0 0x1 0x0 +#define MX7D_PAD_SD2_CMD__MQS_LEFT 0x01BC 0x042C 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_CMD__GPT4_CAPTURE1 0x01BC 0x042C 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_CMD__SIM2_PORT1_TRXD 0x01BC 0x042C 0x06EC 0x4 0x1 +#define MX7D_PAD_SD2_CMD__GPIO5_IO13 0x01BC 0x042C 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_DATA0__SD2_DATA0 0x01C0 0x0430 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_DATA0__SAI2_RX_DATA0 0x01C0 0x0430 0x06B4 0x1 0x0 +#define MX7D_PAD_SD2_DATA0__UART4_DCE_RX 0x01C0 0x0430 0x070C 0x2 0x2 +#define MX7D_PAD_SD2_DATA0__UART4_DTE_TX 0x01C0 0x0430 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_DATA0__GPT4_CAPTURE2 0x01C0 0x0430 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_DATA0__SIM2_PORT1_CLK 0x01C0 0x0430 0x0000 0x4 0x0 +#define MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x01C0 0x0430 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_DATA1__SD2_DATA1 0x01C4 0x0434 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_DATA1__SAI2_TX_BCLK 0x01C4 0x0434 0x06BC 0x1 0x0 +#define MX7D_PAD_SD2_DATA1__UART4_DCE_TX 0x01C4 0x0434 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_DATA1__UART4_DTE_RX 0x01C4 0x0434 0x070C 0x2 0x3 +#define MX7D_PAD_SD2_DATA1__GPT4_COMPARE1 0x01C4 0x0434 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_DATA1__SIM2_PORT1_RST_B 0x01C4 0x0434 0x0000 0x4 0x0 +#define MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x01C4 0x0434 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_DATA2__SD2_DATA2 0x01C8 0x0438 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_DATA2__SAI2_TX_SYNC 0x01C8 0x0438 0x06C0 0x1 0x0 +#define MX7D_PAD_SD2_DATA2__UART4_DCE_CTS 0x01C8 0x0438 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_DATA2__UART4_DTE_RTS 0x01C8 0x0438 0x0708 0x2 0x2 +#define MX7D_PAD_SD2_DATA2__GPT4_COMPARE2 0x01C8 0x0438 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_DATA2__SIM2_PORT1_SVEN 0x01C8 0x0438 0x0000 0x4 0x0 +#define MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x01C8 0x0438 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_DATA3__SD2_DATA3 0x01CC 0x043C 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_DATA3__SAI2_TX_DATA0 0x01CC 0x043C 0x0000 0x1 0x0 +#define MX7D_PAD_SD2_DATA3__UART4_DCE_RTS 0x01CC 0x043C 0x0708 0x2 0x3 +#define MX7D_PAD_SD2_DATA3__UART4_DTE_CTS 0x01CC 0x043C 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_DATA3__GPT4_COMPARE3 0x01CC 0x043C 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_DATA3__SIM2_PORT1_PD 0x01CC 0x043C 0x06E8 0x4 0x1 +#define MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x01CC 0x043C 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_CLK__SD3_CLK 0x01D0 0x0440 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_CLK__NAND_CLE 0x01D0 0x0440 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_CLK__ECSPI4_MISO 0x01D0 0x0440 0x0558 0x2 0x2 +#define MX7D_PAD_SD3_CLK__SAI3_RX_SYNC 0x01D0 0x0440 0x06CC 0x3 0x2 +#define MX7D_PAD_SD3_CLK__GPT3_CLK 0x01D0 0x0440 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_CLK__GPIO6_IO0 0x01D0 0x0440 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_CMD__SD3_CMD 0x01D4 0x0444 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_CMD__NAND_ALE 0x01D4 0x0444 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_CMD__ECSPI4_MOSI 0x01D4 0x0444 0x055C 0x2 0x2 +#define MX7D_PAD_SD3_CMD__SAI3_RX_BCLK 0x01D4 0x0444 0x06C4 0x3 0x2 +#define MX7D_PAD_SD3_CMD__GPT3_CAPTURE1 0x01D4 0x0444 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_CMD__GPIO6_IO1 0x01D4 0x0444 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA0__SD3_DATA0 0x01D8 0x0448 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA0__NAND_DATA00 0x01D8 0x0448 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA0__ECSPI4_SS0 0x01D8 0x0448 0x0560 0x2 0x2 +#define MX7D_PAD_SD3_DATA0__SAI3_RX_DATA0 0x01D8 0x0448 0x06C8 0x3 0x2 +#define MX7D_PAD_SD3_DATA0__GPT3_CAPTURE2 0x01D8 0x0448 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA0__GPIO6_IO2 0x01D8 0x0448 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA1__SD3_DATA1 0x01DC 0x044C 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA1__NAND_DATA01 0x01DC 0x044C 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA1__ECSPI4_SCLK 0x01DC 0x044C 0x0554 0x2 0x2 +#define MX7D_PAD_SD3_DATA1__SAI3_TX_BCLK 0x01DC 0x044C 0x06D0 0x3 0x2 +#define MX7D_PAD_SD3_DATA1__GPT3_COMPARE1 0x01DC 0x044C 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA1__GPIO6_IO3 0x01DC 0x044C 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA2__SD3_DATA2 0x01E0 0x0450 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA2__NAND_DATA02 0x01E0 0x0450 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA2__I2C3_SDA 0x01E0 0x0450 0x05E8 0x2 0x3 +#define MX7D_PAD_SD3_DATA2__SAI3_TX_SYNC 0x01E0 0x0450 0x06D4 0x3 0x2 +#define MX7D_PAD_SD3_DATA2__GPT3_COMPARE2 0x01E0 0x0450 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA2__GPIO6_IO4 0x01E0 0x0450 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA3__SD3_DATA3 0x01E4 0x0454 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA3__NAND_DATA03 0x01E4 0x0454 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA3__I2C3_SCL 0x01E4 0x0454 0x05E4 0x2 0x3 +#define MX7D_PAD_SD3_DATA3__SAI3_TX_DATA0 0x01E4 0x0454 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA3__GPT3_COMPARE3 0x01E4 0x0454 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA3__GPIO6_IO5 0x01E4 0x0454 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA4__SD3_DATA4 0x01E8 0x0458 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA4__NAND_DATA04 0x01E8 0x0458 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA4__UART3_DCE_RX 0x01E8 0x0458 0x0704 0x3 0x4 +#define MX7D_PAD_SD3_DATA4__UART3_DTE_TX 0x01E8 0x0458 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA4__FLEXCAN2_RX 0x01E8 0x0458 0x04E0 0x4 0x2 +#define MX7D_PAD_SD3_DATA4__GPIO6_IO6 0x01E8 0x0458 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA5__SD3_DATA5 0x01EC 0x045C 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA5__NAND_DATA05 0x01EC 0x045C 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA5__UART3_DCE_TX 0x01EC 0x045C 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA5__UART3_DTE_RX 0x01EC 0x045C 0x0704 0x3 0x5 +#define MX7D_PAD_SD3_DATA5__FLEXCAN1_TX 0x01EC 0x045C 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA5__GPIO6_IO7 0x01EC 0x045C 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA6__SD3_DATA6 0x01F0 0x0460 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA6__NAND_DATA06 0x01F0 0x0460 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA6__SD3_WP 0x01F0 0x0460 0x073C 0x2 0x2 +#define MX7D_PAD_SD3_DATA6__UART3_DCE_RTS 0x01F0 0x0460 0x0700 0x3 0x4 +#define MX7D_PAD_SD3_DATA6__UART3_DTE_CTS 0x01F0 0x0460 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA6__FLEXCAN2_TX 0x01F0 0x0460 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA6__GPIO6_IO8 0x01F0 0x0460 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA7__SD3_DATA7 0x01F4 0x0464 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA7__NAND_DATA07 0x01F4 0x0464 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA7__SD3_CD_B 0x01F4 0x0464 0x0738 0x2 0x2 +#define MX7D_PAD_SD3_DATA7__UART3_DCE_CTS 0x01F4 0x0464 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA7__UART3_DTE_RTS 0x01F4 0x0464 0x0700 0x3 0x5 +#define MX7D_PAD_SD3_DATA7__FLEXCAN1_RX 0x01F4 0x0464 0x04DC 0x4 0x2 +#define MX7D_PAD_SD3_DATA7__GPIO6_IO9 0x01F4 0x0464 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_STROBE__SD3_STROBE 0x01F8 0x0468 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_STROBE__NAND_RE_B 0x01F8 0x0468 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_STROBE__GPIO6_IO10 0x01F8 0x0468 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x01FC 0x046C 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x01FC 0x046C 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_RESET_B__SD3_RESET 0x01FC 0x046C 0x0000 0x2 0x0 +#define MX7D_PAD_SD3_RESET_B__SAI3_MCLK 0x01FC 0x046C 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x01FC 0x046C 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x0200 0x0470 0x06A0 0x0 0x0 +#define MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B 0x0200 0x0470 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x0200 0x0470 0x0714 0x2 0x2 +#define MX7D_PAD_SAI1_RX_DATA__UART5_DTE_TX 0x0200 0x0470 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX 0x0200 0x0470 0x04DC 0x3 0x3 +#define MX7D_PAD_SAI1_RX_DATA__SIM1_PORT1_TRXD 0x0200 0x0470 0x06E4 0x4 0x1 +#define MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x0200 0x0470 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_RX_DATA__SRC_ANY_PU_RESET 0x0200 0x0470 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x0204 0x0474 0x06A8 0x0 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x0204 0x0474 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x0204 0x0474 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__UART5_DTE_RX 0x0204 0x0474 0x0714 0x2 0x3 +#define MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX 0x0204 0x0474 0x0000 0x3 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__SIM1_PORT1_CLK 0x0204 0x0474 0x0000 0x4 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x0204 0x0474 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__SRC_EARLY_RESET 0x0204 0x0474 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x0208 0x0478 0x06AC 0x0 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__NAND_DQS 0x0208 0x0478 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x0208 0x0478 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__UART5_DTE_RTS 0x0208 0x0478 0x0710 0x2 0x2 +#define MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX 0x0208 0x0478 0x04E0 0x3 0x3 +#define MX7D_PAD_SAI1_TX_SYNC__SIM1_PORT1_RST_B 0x0208 0x0478 0x0000 0x4 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x0208 0x0478 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__SRC_INT_BOOT 0x0208 0x0478 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x020C 0x047C 0x0000 0x0 0x0 +#define MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x020C 0x047C 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x020C 0x047C 0x0710 0x2 0x3 +#define MX7D_PAD_SAI1_TX_DATA__UART5_DTE_CTS 0x020C 0x047C 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX 0x020C 0x047C 0x0000 0x3 0x0 +#define MX7D_PAD_SAI1_TX_DATA__SIM1_PORT1_SVEN 0x020C 0x047C 0x0000 0x4 0x0 +#define MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x020C 0x047C 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_TX_DATA__SRC_SYSTEM_RESET 0x020C 0x047C 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__SAI1_RX_SYNC 0x0210 0x0480 0x06A4 0x0 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B 0x0210 0x0480 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC 0x0210 0x0480 0x06B8 0x2 0x1 +#define MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x0210 0x0480 0x05EC 0x3 0x3 +#define MX7D_PAD_SAI1_RX_SYNC__SIM1_PORT1_PD 0x0210 0x0480 0x06E0 0x4 0x1 +#define MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x0210 0x0480 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__MQS_RIGHT 0x0210 0x0480 0x0000 0x6 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__SRC_CA7_RESET_B0 0x0210 0x0480 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK 0x0214 0x0484 0x069C 0x0 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B 0x0214 0x0484 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__SAI2_RX_BCLK 0x0214 0x0484 0x06B0 0x2 0x1 +#define MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x0214 0x0484 0x05F0 0x3 0x3 +#define MX7D_PAD_SAI1_RX_BCLK__FLEXTIMER2_PHA 0x0214 0x0484 0x05CC 0x4 0x1 +#define MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x0214 0x0484 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__MQS_LEFT 0x0214 0x0484 0x0000 0x6 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__SRC_CA7_RESET_B1 0x0214 0x0484 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x0218 0x0488 0x0000 0x0 0x0 +#define MX7D_PAD_SAI1_MCLK__NAND_WP_B 0x0218 0x0488 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_MCLK__SAI2_MCLK 0x0218 0x0488 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_MCLK__CCM_PMIC_READY 0x0218 0x0488 0x04F4 0x3 0x3 +#define MX7D_PAD_SAI1_MCLK__FLEXTIMER2_PHB 0x0218 0x0488 0x05D0 0x4 0x1 +#define MX7D_PAD_SAI1_MCLK__GPIO6_IO18 0x0218 0x0488 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_MCLK__SRC_TESTER_ACK 0x0218 0x0488 0x0000 0x7 0x0 +#define MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x021C 0x048C 0x06C0 0x0 0x1 +#define MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x021C 0x048C 0x0548 0x1 0x1 +#define MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x021C 0x048C 0x070C 0x2 0x4 +#define MX7D_PAD_SAI2_TX_SYNC__UART4_DTE_TX 0x021C 0x048C 0x0000 0x2 0x0 +#define MX7D_PAD_SAI2_TX_SYNC__UART1_DCE_CTS 0x021C 0x048C 0x0000 0x3 0x0 +#define MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x021C 0x048C 0x06F0 0x3 0x0 +#define MX7D_PAD_SAI2_TX_SYNC__FLEXTIMER2_CH4 0x021C 0x048C 0x05BC 0x4 0x1 +#define MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19 0x021C 0x048C 0x0000 0x5 0x0 +#define MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x0220 0x0490 0x06BC 0x0 0x1 +#define MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x0220 0x0490 0x054C 0x1 0x1 +#define MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x0220 0x0490 0x0000 0x2 0x0 +#define MX7D_PAD_SAI2_TX_BCLK__UART4_DTE_RX 0x0220 0x0490 0x070C 0x2 0x5 +#define MX7D_PAD_SAI2_TX_BCLK__UART1_DCE_RTS 0x0220 0x0490 0x06F0 0x3 0x1 +#define MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x0220 0x0490 0x0000 0x3 0x0 +#define MX7D_PAD_SAI2_TX_BCLK__FLEXTIMER2_CH5 0x0220 0x0490 0x05C0 0x4 0x1 +#define MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20 0x0220 0x0490 0x0000 0x5 0x0 +#define MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x0224 0x0494 0x06B4 0x0 0x1 +#define MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x0224 0x0494 0x0544 0x1 0x1 +#define MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS 0x0224 0x0494 0x0000 0x2 0x0 +#define MX7D_PAD_SAI2_RX_DATA__UART4_DTE_RTS 0x0224 0x0494 0x0708 0x2 0x4 +#define MX7D_PAD_SAI2_RX_DATA__UART2_DCE_CTS 0x0224 0x0494 0x0000 0x3 0x0 +#define MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x0224 0x0494 0x06F8 0x3 0x2 +#define MX7D_PAD_SAI2_RX_DATA__FLEXTIMER2_CH6 0x0224 0x0494 0x05C4 0x4 0x1 +#define MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x0224 0x0494 0x0000 0x5 0x0 +#define MX7D_PAD_SAI2_RX_DATA__KPP_COL7 0x0224 0x0494 0x0610 0x6 0x1 +#define MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x0228 0x0498 0x0000 0x0 0x0 +#define MX7D_PAD_SAI2_TX_DATA__ECSPI3_SS0 0x0228 0x0498 0x0550 0x1 0x1 +#define MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS 0x0228 0x0498 0x0708 0x2 0x5 +#define MX7D_PAD_SAI2_TX_DATA__UART4_DTE_CTS 0x0228 0x0498 0x0000 0x2 0x0 +#define MX7D_PAD_SAI2_TX_DATA__UART2_DCE_RTS 0x0228 0x0498 0x06F8 0x3 0x3 +#define MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x0228 0x0498 0x0000 0x3 0x0 +#define MX7D_PAD_SAI2_TX_DATA__FLEXTIMER2_CH7 0x0228 0x0498 0x05C8 0x4 0x1 +#define MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22 0x0228 0x0498 0x0000 0x5 0x0 +#define MX7D_PAD_SAI2_TX_DATA__KPP_ROW7 0x0228 0x0498 0x0630 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x022C 0x049C 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__PWM1_OUT 0x022C 0x049C 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL 0x022C 0x049C 0x05E4 0x2 0x4 +#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DCE_CTS 0x022C 0x049C 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DTE_RTS 0x022C 0x049C 0x06F0 0x3 0x2 +#define MX7D_PAD_ENET1_RGMII_RD0__EPDC_VCOM0 0x022C 0x049C 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0 0x022C 0x049C 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__KPP_ROW3 0x022C 0x049C 0x0620 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x0230 0x04A0 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__PWM2_OUT 0x0230 0x04A0 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA 0x0230 0x04A0 0x05E8 0x2 0x4 +#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DCE_RTS 0x0230 0x04A0 0x06F0 0x3 0x3 +#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DTE_CTS 0x0230 0x04A0 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__EPDC_VCOM1 0x0230 0x04A0 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x0230 0x04A0 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__KPP_COL3 0x0230 0x04A0 0x0600 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x0234 0x04A4 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x0234 0x04A4 0x04DC 0x1 0x4 +#define MX7D_PAD_ENET1_RGMII_RD2__ECSPI2_SCLK 0x0234 0x04A4 0x0534 0x2 0x1 +#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DCE_RX 0x0234 0x04A4 0x06F4 0x3 0x2 +#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DTE_TX 0x0234 0x04A4 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_RD2__EPDC_SDCE4 0x0234 0x04A4 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x0234 0x04A4 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RD2__KPP_ROW2 0x0234 0x04A4 0x061C 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x0238 0x04A8 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x0238 0x04A8 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__ECSPI2_MOSI 0x0238 0x04A8 0x053C 0x2 0x1 +#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DCE_TX 0x0238 0x04A8 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DTE_RX 0x0238 0x04A8 0x06F4 0x3 0x3 +#define MX7D_PAD_ENET1_RGMII_RD3__EPDC_SDCE5 0x0238 0x04A8 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x0238 0x04A8 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__KPP_COL2 0x0238 0x04A8 0x05FC 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x023C 0x04AC 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__ECSPI2_SS1 0x023C 0x04AC 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__EPDC_SDCE6 0x023C 0x04AC 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4 0x023C 0x04AC 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__KPP_ROW1 0x023C 0x04AC 0x0618 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x0240 0x04B0 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x0240 0x04B0 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__ECSPI2_SS2 0x0240 0x04B0 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__EPDC_SDCE7 0x0240 0x04B0 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5 0x0240 0x04B0 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__KPP_COL1 0x0240 0x04B0 0x0000 0x6 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x0244 0x04B4 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__PWM3_OUT 0x0244 0x04B4 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__ECSPI2_SS3 0x0244 0x04B4 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__EPDC_SDCE8 0x0244 0x04B4 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6 0x0244 0x04B4 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__KPP_ROW0 0x0244 0x04B4 0x0614 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x0248 0x04B8 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__PWM4_OUT 0x0248 0x04B8 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__ECSPI2_RDY 0x0248 0x04B8 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__EPDC_SDCE9 0x0248 0x04B8 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7 0x0248 0x04B8 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__KPP_COL0 0x0248 0x04B8 0x05F4 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x024C 0x04BC 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TD2__FLEXCAN2_RX 0x024C 0x04BC 0x04E0 0x1 0x4 +#define MX7D_PAD_ENET1_RGMII_TD2__ECSPI2_MISO 0x024C 0x04BC 0x0538 0x2 0x1 +#define MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x024C 0x04BC 0x05EC 0x3 0x4 +#define MX7D_PAD_ENET1_RGMII_TD2__EPDC_SDOED 0x024C 0x04BC 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8 0x024C 0x04BC 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x0250 0x04C0 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__FLEXCAN2_TX 0x0250 0x04C0 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__ECSPI2_SS0 0x0250 0x04C0 0x0540 0x2 0x1 +#define MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x0250 0x04C0 0x05F0 0x3 0x4 +#define MX7D_PAD_ENET1_RGMII_TD3__EPDC_SDOEZ 0x0250 0x04C0 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 0x0250 0x04C0 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS 0x0250 0x04C0 0x0000 0x7 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x0254 0x04C4 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC 0x0254 0x04C4 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1 0x0254 0x04C4 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2 0x0254 0x04C4 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0254 0x04C4 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x0258 0x04C8 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER 0x0258 0x04C8 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK 0x0258 0x04C8 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2 0x0258 0x04C8 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3 0x0258 0x04C8 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x0258 0x04C8 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x025C 0x04CC 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_TX_CLK__CCM_ENET_REF_CLK1 0x025C 0x04CC 0x0564 0x1 0x2 +#define MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x025C 0x04CC 0x06A0 0x2 0x1 +#define MX7D_PAD_ENET1_TX_CLK__GPT2_COMPARE3 0x025C 0x04CC 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_TX_CLK__EPDC_PWR_IRQ 0x025C 0x04CC 0x057C 0x4 0x1 +#define MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x025C 0x04CC 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1 0x025C 0x04CC 0x04E4 0x6 0x2 +#define MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0 0x025C 0x04CC 0x0000 0x7 0x0 +#define MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK 0x0260 0x04D0 0x056C 0x0 0x0 +#define MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B 0x0260 0x04D0 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x0260 0x04D0 0x06A8 0x2 0x1 +#define MX7D_PAD_ENET1_RX_CLK__GPT2_CLK 0x0260 0x04D0 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RX_CLK__EPDC_PWR_WAKE 0x0260 0x04D0 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13 0x0260 0x04D0 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RX_CLK__CCM_EXT_CLK2 0x0260 0x04D0 0x04E8 0x6 0x2 +#define MX7D_PAD_ENET1_RX_CLK__CSU_ALARM_AUT1 0x0260 0x04D0 0x0000 0x7 0x0 +#define MX7D_PAD_ENET1_CRS__ENET1_CRS 0x0264 0x04D4 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_CRS__WDOG2_WDOG_RST_B_DEB 0x0264 0x04D4 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x0264 0x04D4 0x06AC 0x2 0x1 +#define MX7D_PAD_ENET1_CRS__GPT2_CAPTURE1 0x0264 0x04D4 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_CRS__EPDC_PWR_CTRL0 0x0264 0x04D4 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x0264 0x04D4 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_CRS__CCM_EXT_CLK3 0x0264 0x04D4 0x04EC 0x6 0x2 +#define MX7D_PAD_ENET1_CRS__CSU_ALARM_AUT2 0x0264 0x04D4 0x0000 0x7 0x0 +#define MX7D_PAD_ENET1_COL__ENET1_COL 0x0268 0x04D8 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY 0x0268 0x04D8 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x0268 0x04D8 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_COL__GPT2_CAPTURE2 0x0268 0x04D8 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_COL__EPDC_PWR_CTRL1 0x0268 0x04D8 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_COL__GPIO7_IO15 0x0268 0x04D8 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_COL__CCM_EXT_CLK4 0x0268 0x04D8 0x04F0 0x6 0x2 +#define MX7D_PAD_ENET1_COL__CSU_INT_DEB 0x0268 0x04D8 0x0000 0x7 0x0 + +#endif /* __DTS_IMX7D_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts new file mode 100644 index 000000000000..4d1a4b977d84 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -0,0 +1,408 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "imx7d.dtsi" + +/ { + model = "Freescale i.MX7 SabreSD Board"; + compatible = "fsl,imx7d-sdb", "fsl,imx7d"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can2_3v3: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "can2-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + reg_vref_1v8: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze3000@08 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* use sw1c_reg to align with pfuze100/pfuze200 */ + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + codec: wm8960@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clock-names = "mclk"; + wlf,shared-lrclk; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio5 0 0>; + wp-gpios = <&gpio5 1 0>; + enable-sdio-wakeup; + keep-power-in-suspend; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx7d-sdb { + pinctrl_hog: hoggrp { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f + MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f + >; + }; + + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79 + MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79 + MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79 + MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79 + MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79 + MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79 + MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59 /* WL_REG_ON */ + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp_100mhz { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x5a + MX7D_PAD_SD2_CLK__SD2_CLK 0x1a + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp_200mhz { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x5b + MX7D_PAD_SD2_CLK__SD2_CLK 0x1b + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b + >; + }; + + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b + >; + }; + + }; +}; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi new file mode 100644 index 000000000000..c42cf8db0451 --- /dev/null +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -0,0 +1,486 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/imx7d-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx7d-pinfunc.h" +#include "skeleton.dtsi" + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + operating-points = < + /* KHz uV */ + 996000 1075000 + 792000 975000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>, + <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>; + clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + intc: interrupt-controller@31001000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x31001000 0x1000>, + <0x31002000 0x1000>, + <0x31004000 0x2000>, + <0x31006000 0x2000>; + }; + + ckil: clock-cki { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + aips1: aips-bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x400000>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */ + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@30250000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30250000 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@30260000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30260000 0x10000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpt1: gpt@302d0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x302d0000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT1_ROOT_CLK>; + clock-names = "ipg", "per"; + }; + + gpt2: gpt@302e0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x302e0000 0x10000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt3: gpt@302f0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x302f0000 0x10000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt4: gpt@30300000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x30300000 0x10000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + iomuxc: iomuxc@30330000 { + compatible = "fsl,imx7d-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + gpr: iomuxc-gpr@30340000 { + compatible = "fsl,imx7d-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + ocotp: ocotp-ctrl@30350000 { + compatible = "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clks IMX7D_CLK_DUMMY>; + status = "disabled"; + }; + + anatop: anatop@30360000 { + compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x30360000 0x10000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + reg_1p0d: regulator-vdd1p0d@210 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p0d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + anatop-reg-offset = <0x210>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <8>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1200000>; + anatop-enable-bit = <31>; + }; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x30370000 0x10000>; + + snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + clks: ccm@30380000 { + compatible = "fsl,imx7d-ccm"; + reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>; + clock-names = "ckil", "osc"; + }; + + src: src@30390000 { + compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon"; + reg = <0x30390000 0x10000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + }; + + aips3: aips-bus@30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30800000 0x400000>; + ranges; + + uart1: serial@30860000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART1_ROOT_CLK>, + <&clks IMX7D_UART1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@30870000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30870000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART2_ROOT_CLK>, + <&clks IMX7D_UART2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART3_ROOT_CLK>, + <&clks IMX7D_UART3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c@30a20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a20000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C1_ROOT_CLK>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a30000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C2_ROOT_CLK>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C3_ROOT_CLK>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a50000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C4_ROOT_CLK>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART4_ROOT_CLK>, + <&clks IMX7D_UART4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart5: serial@30a70000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a70000 0x10000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART5_ROOT_CLK>, + <&clks IMX7D_UART5_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart6: serial@30a80000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a80000 0x10000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART6_ROOT_CLK>, + <&clks IMX7D_UART6_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart7: serial@30a90000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a90000 0x10000>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART7_ROOT_CLK>, + <&clks IMX7D_UART7_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + usdhc1: usdhc@30b40000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_USDHC1_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@30b50000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_USDHC2_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: usdhc@30b60000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b60000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_USDHC3_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts index 560d62150ade..50c83c21d911 100644 --- a/arch/arm/boot/dts/k2e-evm.dts +++ b/arch/arm/boot/dts/k2e-evm.dts @@ -141,6 +141,7 @@ }; &mdio { + status = "ok"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/k2e-netcp.dtsi b/arch/arm/boot/dts/k2e-netcp.dtsi new file mode 100644 index 000000000000..b13b3c94e7fc --- /dev/null +++ b/arch/arm/boot/dts/k2e-netcp.dtsi @@ -0,0 +1,206 @@ +/* + * Device Tree Source for Keystone 2 Edison Netcp driver + * + * Copyright 2015 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +qmss: qmss@2a40000 { + compatible = "ti,keystone-navigator-qmss"; + dma-coherent; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&chipclk13>; + ranges; + queue-range = <0 0x2000>; + linkram0 = <0x100000 0x4000>; + linkram1 = <0 0x10000>; + + qmgrs { + #address-cells = <1>; + #size-cells = <1>; + ranges; + qmgr0 { + managed-queues = <0 0x2000>; + reg = <0x2a40000 0x20000>, + <0x2a06000 0x400>, + <0x2a02000 0x1000>, + <0x2a03000 0x1000>, + <0x23a80000 0x20000>, + <0x2a80000 0x20000>; + reg-names = "peek", "status", "config", + "region", "push", "pop"; + }; + }; + queue-pools { + qpend { + qpend-0 { + qrange = <658 8>; + interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; + }; + qpend-1 { + qrange = <528 16>; + interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04 + 0 51 0xf04 0 52 0xf04 0 53 0xf04 + 0 54 0xf04 0 55 0xf04 0 56 0xf04 + 0 57 0xf04 0 58 0xf04 0 59 0xf04 + 0 60 0xf04 0 61 0xf04 0 62 0xf04 + 0 63 0xf04>; + qalloc-by-id; + }; + qpend-2 { + qrange = <544 16>; + interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04 + 0 59 0xf04 0 68 0xf04 0 69 0xf04 + 0 70 0xf04 0 71 0xf04 0 72 0xf04 + 0 73 0xf04 0 74 0xf04 0 75 0xf04 + 0 76 0xf04 0 77 0xf04 0 78 0xf04 + 0 79 0xf04>; + }; + }; + general-purpose { + gp-0 { + qrange = <4000 64>; + }; + netcp-tx { + qrange = <896 128>; + qalloc-by-id; + }; + }; + }; + descriptor-regions { + #address-cells = <1>; + #size-cells = <1>; + ranges; + region-12 { + id = <12>; + region-spec = <8192 128>; /* num_desc desc_size */ + link-index = <0x4000>; + }; + }; +}; /* qmss */ + +knav_dmas: knav_dmas@0 { + compatible = "ti,keystone-navigator-dma"; + clocks = <&papllclk>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,navigator-cloud-address = <0x23a80000 0x23a90000 + 0x23a80000 0x23a90000>; + + dma_gbe: dma_gbe@0 { + reg = <0x24186000 0x100>, + <0x24187000 0x2a0>, + <0x24188000 0xb60>, + <0x24186100 0x80>, + <0x24189000 0x1000>; + reg-names = "global", "txchan", "rxchan", + "txsched", "rxflow"; + }; +}; + +netcp: netcp@24000000 { + reg = <0x2620110 0x8>; + reg-names = "efuse"; + compatible = "ti,netcp-1.0"; + #address-cells = <1>; + #size-cells = <1>; + + /* NetCP address range */ + ranges = <0 0x24000000 0x1000000>; + + clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + dma-coherent; + + ti,navigator-dmas = <&dma_gbe 0>, + <&dma_gbe 8>, + <&dma_gbe 0>; + ti,navigator-dma-names = "netrx0", "netrx1", "nettx"; + + netcp-devices { + #address-cells = <1>; + #size-cells = <1>; + ranges; + gbe@200000 { /* ETHSS */ + label = "netcp-gbe"; + compatible = "ti,netcp-gbe-9"; + reg = <0x200000 0x900>, <0x220000 0x20000>; + /* enable-ale; */ + tx-queue = <896>; + tx-channel = "nettx"; + + interfaces { + gbe0: interface-0 { + slave-port = <0>; + link-interface = <1>; + phy-handle = <ðphy0>; + }; + gbe1: interface-1 { + slave-port = <1>; + link-interface = <1>; + phy-handle = <ðphy1>; + }; + }; + + secondary-slave-ports { + port-2 { + slave-port = <2>; + link-interface = <2>; + }; + port-3 { + slave-port = <3>; + link-interface = <2>; + }; + port-4 { + slave-port = <4>; + link-interface = <2>; + }; + port-5 { + slave-port = <5>; + link-interface = <2>; + }; + port-6 { + slave-port = <6>; + link-interface = <2>; + }; + port-7 { + slave-port = <7>; + link-interface = <2>; + }; + }; + }; + }; + + netcp-interfaces { + interface-0 { + rx-channel = "netrx0"; + rx-pool = <1024 12>; + tx-pool = <1024 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <528>; + tx-completion-queue = <530>; + efuse-mac = <1>; + netcp-gbe = <&gbe0>; + + }; + interface-1 { + rx-channel = "netrx1"; + rx-pool = <1024 12>; + tx-pool = <1024 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <529>; + tx-completion-queue = <531>; + efuse-mac = <0>; + local-mac-address = [02 18 31 7e 3e 00]; + netcp-gbe = <&gbe1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 5fc14683d6df..50e555eab50d 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -130,6 +130,7 @@ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>; }; }; + /include/ "k2e-netcp.dtsi" }; }; diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts index 3223cc152a85..660ebf58d547 100644 --- a/arch/arm/boot/dts/k2hk-evm.dts +++ b/arch/arm/boot/dts/k2hk-evm.dts @@ -169,6 +169,7 @@ }; &mdio { + status = "ok"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/k2hk-netcp.dtsi b/arch/arm/boot/dts/k2hk-netcp.dtsi new file mode 100644 index 000000000000..77a32c3c17e4 --- /dev/null +++ b/arch/arm/boot/dts/k2hk-netcp.dtsi @@ -0,0 +1,208 @@ +/* + * Device Tree Source for Keystone 2 Hawking Netcp driver + * + * Copyright 2015 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +qmss: qmss@2a40000 { + compatible = "ti,keystone-navigator-qmss"; + dma-coherent; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&chipclk13>; + ranges; + queue-range = <0 0x4000>; + linkram0 = <0x100000 0x8000>; + linkram1 = <0x0 0x10000>; + + qmgrs { + #address-cells = <1>; + #size-cells = <1>; + ranges; + qmgr0 { + managed-queues = <0 0x2000>; + reg = <0x2a40000 0x20000>, + <0x2a06000 0x400>, + <0x2a02000 0x1000>, + <0x2a03000 0x1000>, + <0x23a80000 0x20000>, + <0x2a80000 0x20000>; + reg-names = "peek", "status", "config", + "region", "push", "pop"; + }; + + qmgr1 { + managed-queues = <0x2000 0x2000>; + reg = <0x2a60000 0x20000>, + <0x2a06400 0x400>, + <0x2a04000 0x1000>, + <0x2a05000 0x1000>, + <0x23aa0000 0x20000>, + <0x2aa0000 0x20000>; + reg-names = "peek", "status", "config", + "region", "push", "pop"; + }; + }; + queue-pools { + qpend { + qpend-0 { + qrange = <658 8>; + interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; + }; + qpend-1 { + qrange = <8704 16>; + interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04 + 0 51 0xf04 0 52 0xf04 0 53 0xf04 + 0 54 0xf04 0 55 0xf04 0 56 0xf04 + 0 57 0xf04 0 58 0xf04 0 59 0xf04 + 0 60 0xf04 0 61 0xf04 0 62 0xf04 + 0 63 0xf04>; + qalloc-by-id; + }; + qpend-2 { + qrange = <8720 16>; + interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04 + 0 59 0xf04 0 68 0xf04 0 69 0xf04 + 0 70 0xf04 0 71 0xf04 0 72 0xf04 + 0 73 0xf04 0 74 0xf04 0 75 0xf04 + 0 76 0xf04 0 77 0xf04 0 78 0xf04 + 0 79 0xf04>; + }; + }; + general-purpose { + gp-0 { + qrange = <4000 64>; + }; + netcp-tx { + qrange = <640 9>; + qalloc-by-id; + }; + netcpx-tx { + qrange = <8752 8>; + qalloc-by-id; + }; + }; + }; + descriptor-regions { + #address-cells = <1>; + #size-cells = <1>; + ranges; + region-12 { + id = <12>; + region-spec = <8192 128>; /* num_desc desc_size */ + link-index = <0x4000>; + }; + }; +}; /* qmss */ + +knav_dmas: knav_dmas@0 { + compatible = "ti,keystone-navigator-dma"; + clocks = <&papllclk>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,navigator-cloud-address = <0x23a80000 0x23a90000 + 0x23aa0000 0x23ab0000>; + + dma_gbe: dma_gbe@0 { + reg = <0x2004000 0x100>, + <0x2004400 0x120>, + <0x2004800 0x300>, + <0x2004c00 0x120>, + <0x2005000 0x400>; + reg-names = "global", "txchan", "rxchan", + "txsched", "rxflow"; + }; +}; + +netcp: netcp@2000000 { + reg = <0x2620110 0x8>; + reg-names = "efuse"; + compatible = "ti,netcp-1.0"; + #address-cells = <1>; + #size-cells = <1>; + + /* NetCP address range */ + ranges = <0 0x2000000 0x100000>; + + clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + dma-coherent; + + ti,navigator-dmas = <&dma_gbe 22>, + <&dma_gbe 23>, + <&dma_gbe 8>; + ti,navigator-dma-names = "netrx0", "netrx1", "nettx"; + + netcp-devices { + ranges; + #address-cells = <1>; + #size-cells = <1>; + gbe@90000 { /* ETHSS */ + #address-cells = <1>; + #size-cells = <1>; + label = "netcp-gbe"; + compatible = "ti,netcp-gbe"; + reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>; + /* enable-ale; */ + tx-queue = <648>; + tx-channel = "nettx"; + + interfaces { + gbe0: interface-0 { + slave-port = <0>; + link-interface = <1>; + phy-handle = <ðphy0>; + }; + gbe1: interface-1 { + slave-port = <1>; + link-interface = <1>; + phy-handle = <ðphy1>; + }; + }; + + secondary-slave-ports { + port-2 { + slave-port = <2>; + link-interface = <2>; + }; + port-3 { + slave-port = <3>; + link-interface = <2>; + }; + }; + }; + }; + + netcp-interfaces { + interface-0 { + rx-channel = "netrx0"; + rx-pool = <1024 12>; + tx-pool = <1024 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <8704>; + tx-completion-queue = <8706>; + efuse-mac = <1>; + netcp-gbe = <&gbe0>; + + }; + interface-1 { + rx-channel = "netrx1"; + rx-pool = <1024 12>; + tx-pool = <1024 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <8705>; + tx-completion-queue = <8707>; + efuse-mac = <0>; + local-mac-address = [02 18 31 7e 3e 6f]; + netcp-gbe = <&gbe1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi index d721f4b737f7..ae6472407b22 100644 --- a/arch/arm/boot/dts/k2hk.dtsi +++ b/arch/arm/boot/dts/k2hk.dtsi @@ -98,5 +98,6 @@ #gpio-cells = <2>; gpio,syscon-dev = <&devctrl 0x25c>; }; + /include/ "k2hk-netcp.dtsi" }; }; diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts index 85cc7f2872d7..9a69a6b55374 100644 --- a/arch/arm/boot/dts/k2l-evm.dts +++ b/arch/arm/boot/dts/k2l-evm.dts @@ -118,6 +118,7 @@ }; &mdio { + status = "ok"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/k2l-netcp.dtsi new file mode 100644 index 000000000000..6b95284d11d4 --- /dev/null +++ b/arch/arm/boot/dts/k2l-netcp.dtsi @@ -0,0 +1,189 @@ +/* + * Device Tree Source for Keystone 2 Lamarr Netcp driver + * + * Copyright 2015 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +qmss: qmss@2a40000 { + compatible = "ti,keystone-navigator-qmss"; + dma-coherent; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&chipclk13>; + ranges; + queue-range = <0 0x2000>; + linkram0 = <0x100000 0x4000>; + linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */ + + qmgrs { + #address-cells = <1>; + #size-cells = <1>; + ranges; + qmgr0 { + managed-queues = <0 0x2000>; + reg = <0x2a40000 0x20000>, + <0x2a06000 0x400>, + <0x2a02000 0x1000>, + <0x2a03000 0x1000>, + <0x23a80000 0x20000>, + <0x2a80000 0x20000>; + reg-names = "peek", "status", "config", + "region", "push", "pop"; + }; + }; + queue-pools { + qpend { + qpend-0 { + qrange = <658 8>; + interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; + }; + qpend-1 { + qrange = <528 16>; + interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04 + 0 51 0xf04 0 52 0xf04 0 53 0xf04 + 0 54 0xf04 0 55 0xf04 0 56 0xf04 + 0 57 0xf04 0 58 0xf04 0 59 0xf04 + 0 60 0xf04 0 61 0xf04 0 62 0xf04 + 0 63 0xf04>; + qalloc-by-id; + }; + qpend-2 { + qrange = <544 16>; + interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04 + 0 59 0xf04 0 68 0xf04 0 69 0xf04 + 0 70 0xf04 0 71 0xf04 0 72 0xf04 + 0 73 0xf04 0 74 0xf04 0 75 0xf04 + 0 76 0xf04 0 77 0xf04 0 78 0xf04 + 0 79 0xf04>; + }; + }; + general-purpose { + gp-0 { + qrange = <4000 64>; + }; + netcp-tx { + qrange = <896 128>; + qalloc-by-id; + }; + }; + }; + descriptor-regions { + #address-cells = <1>; + #size-cells = <1>; + ranges; + region-12 { + id = <12>; + region-spec = <8192 128>; /* num_desc desc_size */ + link-index = <0x4000>; + }; + }; +}; /* qmss */ + +knav_dmas: knav_dmas@0 { + compatible = "ti,keystone-navigator-dma"; + clocks = <&papllclk>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,navigator-cloud-address = <0x23a80000 0x23a90000>; + + dma_gbe: dma_gbe@0 { + reg = <0x26186000 0x100>, + <0x26187000 0x2a0>, + <0x26188000 0xb60>, + <0x26186100 0x80>, + <0x26189000 0x1000>; + reg-names = "global", "txchan", "rxchan", + "txsched", "rxflow"; + }; +}; + +netcp: netcp@26000000 { + reg = <0x2620110 0x8>; + reg-names = "efuse"; + compatible = "ti,netcp-1.0"; + #address-cells = <1>; + #size-cells = <1>; + + /* NetCP address range */ + ranges = <0 0x26000000 0x1000000>; + + clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + dma-coherent; + + ti,navigator-dmas = <&dma_gbe 0>, + <&dma_gbe 8>, + <&dma_gbe 0>; + ti,navigator-dma-names = "netrx0", "netrx1", "nettx"; + + netcp-devices { + #address-cells = <1>; + #size-cells = <1>; + ranges; + gbe@200000 { /* ETHSS */ + label = "netcp-gbe"; + compatible = "ti,netcp-gbe-5"; + reg = <0x200000 0x900>, <0x220000 0x20000>; + /* enable-ale; */ + tx-queue = <896>; + tx-channel = "nettx"; + + interfaces { + gbe0: interface-0 { + slave-port = <0>; + link-interface = <1>; + phy-handle = <ðphy0>; + }; + gbe1: interface-1 { + slave-port = <1>; + link-interface = <1>; + phy-handle = <ðphy1>; + }; + }; + + secondary-slave-ports { + port-2 { + slave-port = <2>; + link-interface = <2>; + }; + port-3 { + slave-port = <3>; + link-interface = <2>; + }; + }; + }; + }; + + netcp-interfaces { + interface-0 { + rx-channel = "netrx0"; + rx-pool = <1024 12>; + tx-pool = <1024 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <528>; + tx-completion-queue = <530>; + efuse-mac = <1>; + netcp-gbe = <&gbe0>; + + }; + interface-1 { + rx-channel = "netrx1"; + rx-pool = <1024 12>; + tx-pool = <1024 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <529>; + tx-completion-queue = <531>; + efuse-mac = <0>; + local-mac-address = [02 18 31 7e 3e 7f]; + netcp-gbe = <&gbe1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi index e32c3baa77b8..0e007483615e 100644 --- a/arch/arm/boot/dts/k2l.dtsi +++ b/arch/arm/boot/dts/k2l.dtsi @@ -79,6 +79,7 @@ #gpio-cells = <2>; gpio,syscon-dev = <&devctrl 0x24c>; }; + /include/ "k2l-netcp.dtsi" }; }; diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index c9247f8672ae..d2936ad3af1d 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -74,7 +74,7 @@ m25p16@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p16"; + compatible = "st,m25p16", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index ab6ab4933e6b..7ec76566acf2 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -42,7 +42,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l4005a"; + compatible = "mxicy,mx25l4005a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index 786959ee9cbe..0473fcc260f7 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -93,7 +93,7 @@ m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l12805d"; + compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 6467c7924195..e2abc8246bf3 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -42,7 +42,7 @@ m25p40@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l1606e"; + compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 53484474df1f..1d6528d82969 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -74,7 +74,7 @@ m25p40@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p40"; + compatible = "m25p40", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index f82827d6fcff..b7e7d78c484e 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -65,7 +65,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l12805d"; + compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi index b0cfb7cd30b9..1508b12147df 100644 --- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi @@ -33,7 +33,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l4005a"; + compatible = "mxicy,mx25l4005a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index fe6c0246db1a..e832b6320264 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -29,7 +29,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l4005a"; + compatible = "mxicy,mx25l4005a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts index 35a29dee8dd8..e0b959396ca2 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts @@ -61,7 +61,7 @@ m25p128@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p128"; + compatible = "st,m25p128", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 8be5b2e4626e..04015c174b99 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -217,7 +217,7 @@ m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p80"; + compatible = "st,m25p80", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts index 610ec0f95858..ed956b849a71 100644 --- a/arch/arm/boot/dts/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/kirkwood-t5325.dts @@ -88,7 +88,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p80"; + compatible = "st,m25p80", "jedec,spi-nor"; spi-max-frequency = <86000000>; reg = <0>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index df7f15276575..c56ab6bbfe3c 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -49,7 +49,7 @@ m25p128@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p128"; + compatible = "m25p128", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts deleted file mode 100644 index e83e4f9310b8..000000000000 --- a/arch/arm/boot/dts/kizbox.dts +++ /dev/null @@ -1,150 +0,0 @@ -/* - * kizbox.dts - Device Tree file for Overkiz Kizbox board - * - * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com> - * - * Licensed under GPLv2. - */ -/dts-v1/; -#include "at91sam9g20.dtsi" - -/ { - - model = "Overkiz kizbox"; - compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9"; - - chosen { - bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root"; - }; - - memory { - reg = <0x20000000 0x2000000>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - - main_xtal { - clock-frequency = <18432000>; - }; - }; - - ahb { - apb { - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@fffb0000 { - status = "okay"; - }; - - usart1: serial@fffb4000 { - status = "okay"; - }; - - macb0: ethernet@fffc4000 { - phy-mode = "mii"; - pinctrl-0 = <&pinctrl_macb_rmii - &pinctrl_macb_rmii_mii_alt>; - status = "okay"; - }; - - watchdog@fffffd40 { - timeout-sec = <15>; - atmel,max-heartbeat-sec = <16>; - atmel,min-heartbeat-sec = <0>; - status = "okay"; - }; - }; - - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - status = "okay"; - - bootloaderkernel@0 { - label = "bootloader-kernel"; - reg = <0x0 0xc0000>; - }; - - ubi@c0000 { - label = "ubi"; - reg = <0xc0000 0x7f40000>; - }; - - }; - - usb0: ohci@00500000 { - num-ports = <1>; - status = "okay"; - }; - }; - - i2c@0 { - status = "okay"; - - pcf8563@51 { - /* nxp pcf8563 rtc */ - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - }; - - leds { - compatible = "gpio-leds"; - - led1g { - label = "led1:green"; - gpios = <&pioB 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - - led1r { - label = "led1:red"; - gpios = <&pioB 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - - led2g { - label = "led2:green"; - gpios = <&pioB 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - default-state = "on"; - }; - - led2r { - label = "led2:red"; - gpios = <&pioB 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - reset { - label = "reset"; - gpios = <&pioB 30 GPIO_ACTIVE_LOW>; - linux,code = <0x100>; - gpio-key,wakeup; - }; - - mode { - label = "mode"; - gpios = <&pioB 31 GPIO_ACTIVE_LOW>; - linux,code = <0x101>; - gpio-key,wakeup; - }; - }; -}; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts new file mode 100644 index 000000000000..91146c318798 --- /dev/null +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -0,0 +1,157 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "omap36xx.dtsi" +#include "logicpd-torpedo-som.dtsi" +#include "omap-gpmc-smsc9221.dtsi" + +/ { + model = "LogicPD Zoom DM3730 Torpedo Development Kit"; + compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx"; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>; + + sysboot2 { + label = "sysboot2"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */ + linux,code = <BTN_0>; + gpio-key,wakeup; + }; + + sysboot5 { + label = "sysboot5"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */ + linux,code = <BTN_1>; + gpio-key,wakeup; + }; + + gpio1 { + label = "gpio1"; + gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */ + linux,code = <BTN_2>; + gpio-key,wakeup; + }; + + gpio2 { + label = "gpio2"; + gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */ + linux,code = <BTN_3>; + gpio-key,wakeup; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led1 { + label = "led1"; + gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */ + linux,default-trigger = "cpu0"; + }; + + led2 { + label = "led2"; + gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */ + linux,default-trigger = "none"; + }; + }; +}; + +&charger { + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; +}; + +&gpmc { + ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + + ethernet@gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&lan9221_pins>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */ + reg = <1 0 0xff>; + }; +}; + +&mmc1 { + interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins &mmc1_cd>; + cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>; /* gpio127 */ + vmmc-supply = <&vmmc1>; + bus-width = <4>; + cap-power-off-card; +}; + +&omap3_pmx_core { + gpio_key_pins: pinmux_gpio_key_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */ + >; + }; + + led_pins: pinmux_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; +}; + +&omap3_pmx_wkup { + gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */ + OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */ + >; + }; + + lan9221_pins: pinmux_lan9221_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ + >; + }; + + mmc1_cd: pinmux_mmc1_cd { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */ + >; + }; +}; + +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi new file mode 100644 index 000000000000..36387b11451d --- /dev/null +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -0,0 +1,162 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + leds { + compatible = "gpio-leds"; + user0 { + label = "user0"; + gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */ + linux,default-trigger = "none"; + }; + }; + + wl12xx_vmmc: wl12xx_vmmc { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 29 0>; /* gpio157 */ + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&vmmc2>; + }; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + linux,mtd-name = "micron,mt29f4g16abbda3w"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + /* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */ + + x-loader@0 { + label = "x-loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "u-boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "u-boot-env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "fs"; + reg = <0x680000 0>; /* 0 = MTDPART_SIZ_FULL */ + }; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/* + * Only found on the wireless SOM. For the SOM without wireless, the pins for + * MMC3 can be routed with jumpers to the second MMC slot on the devkit and + * gpio157 is not connected. So this should be OK to keep common for now, + * probably device tree overlays is the way to go with the various SOM and + * jumpering combinations for the long run. + */ +&mmc3 { + interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; + pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>; + pinctrl-names = "default"; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1283"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + ref-clock-frequency = <26000000>; + }; +}; + +&omap3_pmx_core { + mmc3_pins: pinmux_mm3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */ + >; + }; +}; + +&omap3_pmx_core2 { + mmc3_core2_pins: pinmux_mmc3_core2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ + OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ + >; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&twl { + twl_power: power { + compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle"; + ti,use_poweroff; + }; +}; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi new file mode 100644 index 000000000000..204da5b52ef9 --- /dev/null +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -0,0 +1,114 @@ +/* + * Common base for NXP LPC18xx and LPC43xx devices. + * + * Copyright 2015 Joachim Eastwood <manabian@gmail.com> + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ + +#include "armv7-m.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-m3"; + device_type = "cpu"; + reg = <0x0>; + }; + }; + + clocks { + xtal: xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + /* Temporary hardcode PLL1 until clk drivers are merged */ + pll1: pll1 { + compatible = "fixed-factor-clock"; + clocks = <&xtal>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <12>; + }; + }; + + soc { + uart0: serial@40081000 { + compatible = "ns16550a"; + reg = <0x40081000 0x1000>; + reg-shift = <2>; + interrupts = <24>; + clocks = <&pll1>; + status = "disabled"; + }; + + uart1: serial@40082000 { + compatible = "ns16550a"; + reg = <0x40082000 0x1000>; + reg-shift = <2>; + interrupts = <25>; + clocks = <&pll1>; + status = "disabled"; + }; + + timer0: timer@40084000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40084000 0x1000>; + interrupts = <12>; + clocks = <&pll1>; + clock-names = "timerclk"; + }; + + timer1: timer@40085000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40085000 0x1000>; + interrupts = <13>; + clocks = <&pll1>; + clock-names = "timerclk"; + }; + + uart2: serial@400c1000 { + compatible = "ns16550a"; + reg = <0x400c1000 0x1000>; + reg-shift = <2>; + interrupts = <26>; + clocks = <&pll1>; + status = "disabled"; + }; + + uart3: serial@400c2000 { + compatible = "ns16550a"; + reg = <0x400c2000 0x1000>; + reg-shift = <2>; + interrupts = <27>; + clocks = <&pll1>; + status = "disabled"; + }; + + timer2: timer@400c3000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x400c3000 0x1000>; + interrupts = <14>; + clocks = <&pll1>; + clock-names = "timerclk"; + }; + + timer3: timer@400c4000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x400c4000 0x1000>; + interrupts = <15>; + clocks = <&pll1>; + clock-names = "timerclk"; + }; + }; +}; diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts new file mode 100644 index 000000000000..d04072f40817 --- /dev/null +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -0,0 +1,45 @@ +/* + * Hitex LPC4350 Evaluation Board + * + * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com> + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ +/dts-v1/; + +#include "lpc18xx.dtsi" +#include "lpc4350.dtsi" + +/ { + model = "Hitex LPC4350 Evaluation Board"; + compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x28000000 0x800000>; /* 8 MB */ + }; +}; + +&pll1 { + clock-mult = <15>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lpc4350.dtsi b/arch/arm/boot/dts/lpc4350.dtsi new file mode 100644 index 000000000000..c4422f587055 --- /dev/null +++ b/arch/arm/boot/dts/lpc4350.dtsi @@ -0,0 +1,39 @@ +/* + * NXP LPC4350 and LPC4330 SoC + * + * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com> + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ + +/ { + compatible = "nxp,lpc4350", "nxp,lpc4330"; + + cpus { + cpu@0 { + compatible = "arm,cortex-m4"; + }; + }; + + soc { + sram0: sram@10000000 { + compatible = "mmio-sram"; + reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */ + }; + + sram1: sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */ + }; + + sram2: sram@20000000 { + compatible = "mmio-sram"; + reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */ + }; + }; +}; diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts new file mode 100644 index 000000000000..08a6f757f924 --- /dev/null +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -0,0 +1,41 @@ +/* + * Embedded Artist LPC4357 Developer's Kit + * + * Copyright 2015 Joachim Eastwood <manabian@gmail.com> + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ +/dts-v1/; + +#include "lpc18xx.dtsi" +#include "lpc4357.dtsi" + +/ { + model = "Embedded Artists' LPC4357 Developer's Kit"; + compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x28000000 0x2000000>; /* 32 MB */ + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lpc4357.dtsi b/arch/arm/boot/dts/lpc4357.dtsi new file mode 100644 index 000000000000..fb9ecc754e8d --- /dev/null +++ b/arch/arm/boot/dts/lpc4357.dtsi @@ -0,0 +1,39 @@ +/* + * NXP LPC435x, LPC433x, LPC4327, LPC4325, LPC4317 and LPC4315 SoC + * + * Copyright 2015 Joachim Eastwood <manabian@gmail.com> + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ + +/ { + compatible = "nxp,lpc4357"; + + cpus { + cpu@0 { + compatible = "arm,cortex-m4"; + }; + }; + + soc { + sram0: sram@10000000 { + compatible = "mmio-sram"; + reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */ + }; + + sram1: sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */ + }; + + sram2: sram@20000000 { + compatible = "mmio-sram"; + reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */ + }; + }; +}; diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi index aaa786233d93..ca3402e8240b 100644 --- a/arch/arm/boot/dts/mt8127.dtsi +++ b/arch/arm/boot/dts/mt8127.dtsi @@ -107,7 +107,7 @@ <0 0x10216000 0 0x2000>; }; - uart0: serial@11006000 { + uart0: serial@11002000 { compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; @@ -115,7 +115,7 @@ status = "disabled"; }; - uart1: serial@11007000 { + uart1: serial@11003000 { compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x400>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; @@ -123,7 +123,7 @@ status = "disabled"; }; - uart2: serial@11008000 { + uart2: serial@11004000 { compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x400>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; @@ -131,7 +131,7 @@ status = "disabled"; }; - uart3: serial@11009000 { + uart3: serial@11005000 { compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; reg = <0 0x11005000 0 0x400>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/mt8135-pinfunc.h b/arch/arm/boot/dts/mt8135-pinfunc.h new file mode 100644 index 000000000000..5a609875cb18 --- /dev/null +++ b/arch/arm/boot/dts/mt8135-pinfunc.h @@ -0,0 +1,1302 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DTS_MT8135_PINFUNC_H +#define __DTS_MT8135_PINFUNC_H + +#include <dt-bindings/pinctrl/mt65xx.h> + +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(0) | 1) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_EINT49 (MTK_PIN_NO(0) | 2) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_I2SOUT_DAT (MTK_PIN_NO(0) | 3) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_DAC_DAT_OUT (MTK_PIN_NO(0) | 4) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_PCM1_DO (MTK_PIN_NO(0) | 5) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_SPI1_MO (MTK_PIN_NO(0) | 6) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_NALE (MTK_PIN_NO(0) | 7) + +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(1) | 1) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_EINT48 (MTK_PIN_NO(1) | 2) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_I2SIN_WS (MTK_PIN_NO(1) | 3) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_DAC_WS (MTK_PIN_NO(1) | 4) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_PCM1_WS (MTK_PIN_NO(1) | 5) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_SPI1_CSN (MTK_PIN_NO(1) | 6) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_NCLE (MTK_PIN_NO(1) | 7) + +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(2) | 1) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_EINT47 (MTK_PIN_NO(2) | 2) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_I2SIN_CK (MTK_PIN_NO(2) | 3) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_DAC_CK (MTK_PIN_NO(2) | 4) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_PCM1_CK (MTK_PIN_NO(2) | 5) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_SPI1_CLK (MTK_PIN_NO(2) | 6) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(2) | 7) + +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(3) | 1) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_EINT46 (MTK_PIN_NO(3) | 2) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_A_FUNC_CK (MTK_PIN_NO(3) | 3) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_LSCE1B_2X (MTK_PIN_NO(3) | 6) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_NLD5 (MTK_PIN_NO(3) | 7) + +#define MT8135_PIN_4_MSDC0_CMD__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(4) | 1) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_EINT41 (MTK_PIN_NO(4) | 2) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_A_FUNC_DOUT_0 (MTK_PIN_NO(4) | 3) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_USB_TEST_IO_0 (MTK_PIN_NO(4) | 5) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_LRSTB_2X (MTK_PIN_NO(4) | 6) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_NRNB (MTK_PIN_NO(4) | 7) + +#define MT8135_PIN_5_MSDC0_CLK__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(5) | 1) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_EINT40 (MTK_PIN_NO(5) | 2) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_A_FUNC_DOUT_1 (MTK_PIN_NO(5) | 3) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_USB_TEST_IO_1 (MTK_PIN_NO(5) | 5) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_LPTE (MTK_PIN_NO(5) | 6) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_NREB (MTK_PIN_NO(5) | 7) + +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(6) | 1) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_EINT45 (MTK_PIN_NO(6) | 2) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_A_FUNC_DOUT_2 (MTK_PIN_NO(6) | 3) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_USB_TEST_IO_2 (MTK_PIN_NO(6) | 5) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_LSCE0B_2X (MTK_PIN_NO(6) | 6) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_NLD7 (MTK_PIN_NO(6) | 7) + +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(7) | 1) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_EINT44 (MTK_PIN_NO(7) | 2) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_A_FUNC_DOUT_3 (MTK_PIN_NO(7) | 3) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_USB_TEST_IO_3 (MTK_PIN_NO(7) | 5) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_LSA0_2X (MTK_PIN_NO(7) | 6) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_NLD14 (MTK_PIN_NO(7) | 7) + +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(8) | 1) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_EINT43 (MTK_PIN_NO(8) | 2) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_USB_TEST_IO_4 (MTK_PIN_NO(8) | 5) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_LSCK_2X (MTK_PIN_NO(8) | 6) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_NLD11 (MTK_PIN_NO(8) | 7) + +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(9) | 1) +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_EINT42 (MTK_PIN_NO(9) | 2) +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_USB_TEST_IO_5 (MTK_PIN_NO(9) | 5) +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_LSDA_2X (MTK_PIN_NO(9) | 6) + +#define MT8135_PIN_10_NCEB0__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define MT8135_PIN_10_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(10) | 1) +#define MT8135_PIN_10_NCEB0__FUNC_EINT139 (MTK_PIN_NO(10) | 2) +#define MT8135_PIN_10_NCEB0__FUNC_TESTA_OUT4 (MTK_PIN_NO(10) | 7) + +#define MT8135_PIN_11_NCEB1__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define MT8135_PIN_11_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(11) | 1) +#define MT8135_PIN_11_NCEB1__FUNC_EINT140 (MTK_PIN_NO(11) | 2) +#define MT8135_PIN_11_NCEB1__FUNC_USB_DRVVBUS (MTK_PIN_NO(11) | 6) +#define MT8135_PIN_11_NCEB1__FUNC_TESTA_OUT5 (MTK_PIN_NO(11) | 7) + +#define MT8135_PIN_12_NRNB__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define MT8135_PIN_12_NRNB__FUNC_NRNB (MTK_PIN_NO(12) | 1) +#define MT8135_PIN_12_NRNB__FUNC_EINT141 (MTK_PIN_NO(12) | 2) +#define MT8135_PIN_12_NRNB__FUNC_A_FUNC_DOUT_4 (MTK_PIN_NO(12) | 3) +#define MT8135_PIN_12_NRNB__FUNC_TESTA_OUT6 (MTK_PIN_NO(12) | 7) + +#define MT8135_PIN_13_NCLE__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define MT8135_PIN_13_NCLE__FUNC_NCLE (MTK_PIN_NO(13) | 1) +#define MT8135_PIN_13_NCLE__FUNC_EINT142 (MTK_PIN_NO(13) | 2) +#define MT8135_PIN_13_NCLE__FUNC_A_FUNC_DOUT_5 (MTK_PIN_NO(13) | 3) +#define MT8135_PIN_13_NCLE__FUNC_CM2PDN_1X (MTK_PIN_NO(13) | 4) +#define MT8135_PIN_13_NCLE__FUNC_NALE (MTK_PIN_NO(13) | 6) +#define MT8135_PIN_13_NCLE__FUNC_TESTA_OUT7 (MTK_PIN_NO(13) | 7) + +#define MT8135_PIN_14_NALE__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define MT8135_PIN_14_NALE__FUNC_NALE (MTK_PIN_NO(14) | 1) +#define MT8135_PIN_14_NALE__FUNC_EINT143 (MTK_PIN_NO(14) | 2) +#define MT8135_PIN_14_NALE__FUNC_A_FUNC_DOUT_6 (MTK_PIN_NO(14) | 3) +#define MT8135_PIN_14_NALE__FUNC_CM2MCLK_1X (MTK_PIN_NO(14) | 4) +#define MT8135_PIN_14_NALE__FUNC_IRDA_RXD (MTK_PIN_NO(14) | 5) +#define MT8135_PIN_14_NALE__FUNC_NCLE (MTK_PIN_NO(14) | 6) +#define MT8135_PIN_14_NALE__FUNC_TESTA_OUT8 (MTK_PIN_NO(14) | 7) + +#define MT8135_PIN_15_NREB__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define MT8135_PIN_15_NREB__FUNC_NREB (MTK_PIN_NO(15) | 1) +#define MT8135_PIN_15_NREB__FUNC_EINT144 (MTK_PIN_NO(15) | 2) +#define MT8135_PIN_15_NREB__FUNC_A_FUNC_DOUT_7 (MTK_PIN_NO(15) | 3) +#define MT8135_PIN_15_NREB__FUNC_CM2RST_1X (MTK_PIN_NO(15) | 4) +#define MT8135_PIN_15_NREB__FUNC_IRDA_TXD (MTK_PIN_NO(15) | 5) +#define MT8135_PIN_15_NREB__FUNC_TESTA_OUT9 (MTK_PIN_NO(15) | 7) + +#define MT8135_PIN_16_NWEB__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) +#define MT8135_PIN_16_NWEB__FUNC_NWEB (MTK_PIN_NO(16) | 1) +#define MT8135_PIN_16_NWEB__FUNC_EINT145 (MTK_PIN_NO(16) | 2) +#define MT8135_PIN_16_NWEB__FUNC_A_FUNC_DIN_0 (MTK_PIN_NO(16) | 3) +#define MT8135_PIN_16_NWEB__FUNC_CM2PCLK_1X (MTK_PIN_NO(16) | 4) +#define MT8135_PIN_16_NWEB__FUNC_IRDA_PDN (MTK_PIN_NO(16) | 5) +#define MT8135_PIN_16_NWEB__FUNC_TESTA_OUT10 (MTK_PIN_NO(16) | 7) + +#define MT8135_PIN_17_NLD0__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) +#define MT8135_PIN_17_NLD0__FUNC_NLD0 (MTK_PIN_NO(17) | 1) +#define MT8135_PIN_17_NLD0__FUNC_EINT146 (MTK_PIN_NO(17) | 2) +#define MT8135_PIN_17_NLD0__FUNC_A_FUNC_DIN_1 (MTK_PIN_NO(17) | 3) +#define MT8135_PIN_17_NLD0__FUNC_CM2DAT_1X_0 (MTK_PIN_NO(17) | 4) +#define MT8135_PIN_17_NLD0__FUNC_I2SIN_CK (MTK_PIN_NO(17) | 5) +#define MT8135_PIN_17_NLD0__FUNC_DAC_CK (MTK_PIN_NO(17) | 6) +#define MT8135_PIN_17_NLD0__FUNC_TESTA_OUT11 (MTK_PIN_NO(17) | 7) + +#define MT8135_PIN_18_NLD1__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define MT8135_PIN_18_NLD1__FUNC_NLD1 (MTK_PIN_NO(18) | 1) +#define MT8135_PIN_18_NLD1__FUNC_EINT147 (MTK_PIN_NO(18) | 2) +#define MT8135_PIN_18_NLD1__FUNC_A_FUNC_DIN_2 (MTK_PIN_NO(18) | 3) +#define MT8135_PIN_18_NLD1__FUNC_CM2DAT_1X_1 (MTK_PIN_NO(18) | 4) +#define MT8135_PIN_18_NLD1__FUNC_I2SIN_WS (MTK_PIN_NO(18) | 5) +#define MT8135_PIN_18_NLD1__FUNC_DAC_WS (MTK_PIN_NO(18) | 6) +#define MT8135_PIN_18_NLD1__FUNC_TESTA_OUT12 (MTK_PIN_NO(18) | 7) + +#define MT8135_PIN_19_NLD2__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define MT8135_PIN_19_NLD2__FUNC_NLD2 (MTK_PIN_NO(19) | 1) +#define MT8135_PIN_19_NLD2__FUNC_EINT148 (MTK_PIN_NO(19) | 2) +#define MT8135_PIN_19_NLD2__FUNC_A_FUNC_DIN_3 (MTK_PIN_NO(19) | 3) +#define MT8135_PIN_19_NLD2__FUNC_CM2DAT_1X_2 (MTK_PIN_NO(19) | 4) +#define MT8135_PIN_19_NLD2__FUNC_I2SOUT_DAT (MTK_PIN_NO(19) | 5) +#define MT8135_PIN_19_NLD2__FUNC_DAC_DAT_OUT (MTK_PIN_NO(19) | 6) +#define MT8135_PIN_19_NLD2__FUNC_TESTA_OUT13 (MTK_PIN_NO(19) | 7) + +#define MT8135_PIN_20_NLD3__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define MT8135_PIN_20_NLD3__FUNC_NLD3 (MTK_PIN_NO(20) | 1) +#define MT8135_PIN_20_NLD3__FUNC_EINT149 (MTK_PIN_NO(20) | 2) +#define MT8135_PIN_20_NLD3__FUNC_A_FUNC_DIN_4 (MTK_PIN_NO(20) | 3) +#define MT8135_PIN_20_NLD3__FUNC_CM2DAT_1X_3 (MTK_PIN_NO(20) | 4) +#define MT8135_PIN_20_NLD3__FUNC_TESTA_OUT14 (MTK_PIN_NO(20) | 7) + +#define MT8135_PIN_21_NLD4__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define MT8135_PIN_21_NLD4__FUNC_NLD4 (MTK_PIN_NO(21) | 1) +#define MT8135_PIN_21_NLD4__FUNC_EINT150 (MTK_PIN_NO(21) | 2) +#define MT8135_PIN_21_NLD4__FUNC_A_FUNC_DIN_5 (MTK_PIN_NO(21) | 3) +#define MT8135_PIN_21_NLD4__FUNC_CM2DAT_1X_4 (MTK_PIN_NO(21) | 4) +#define MT8135_PIN_21_NLD4__FUNC_TESTA_OUT15 (MTK_PIN_NO(21) | 7) + +#define MT8135_PIN_22_NLD5__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define MT8135_PIN_22_NLD5__FUNC_NLD5 (MTK_PIN_NO(22) | 1) +#define MT8135_PIN_22_NLD5__FUNC_EINT151 (MTK_PIN_NO(22) | 2) +#define MT8135_PIN_22_NLD5__FUNC_A_FUNC_DIN_6 (MTK_PIN_NO(22) | 3) +#define MT8135_PIN_22_NLD5__FUNC_CM2DAT_1X_5 (MTK_PIN_NO(22) | 4) +#define MT8135_PIN_22_NLD5__FUNC_TESTA_OUT16 (MTK_PIN_NO(22) | 7) + +#define MT8135_PIN_23_NLD6__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define MT8135_PIN_23_NLD6__FUNC_NLD6 (MTK_PIN_NO(23) | 1) +#define MT8135_PIN_23_NLD6__FUNC_EINT152 (MTK_PIN_NO(23) | 2) +#define MT8135_PIN_23_NLD6__FUNC_A_FUNC_DIN_7 (MTK_PIN_NO(23) | 3) +#define MT8135_PIN_23_NLD6__FUNC_CM2DAT_1X_6 (MTK_PIN_NO(23) | 4) +#define MT8135_PIN_23_NLD6__FUNC_TESTA_OUT17 (MTK_PIN_NO(23) | 7) + +#define MT8135_PIN_24_NLD7__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define MT8135_PIN_24_NLD7__FUNC_NLD7 (MTK_PIN_NO(24) | 1) +#define MT8135_PIN_24_NLD7__FUNC_EINT153 (MTK_PIN_NO(24) | 2) +#define MT8135_PIN_24_NLD7__FUNC_A_FUNC_DIN_8 (MTK_PIN_NO(24) | 3) +#define MT8135_PIN_24_NLD7__FUNC_CM2DAT_1X_7 (MTK_PIN_NO(24) | 4) +#define MT8135_PIN_24_NLD7__FUNC_TESTA_OUT18 (MTK_PIN_NO(24) | 7) + +#define MT8135_PIN_25_NLD8__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define MT8135_PIN_25_NLD8__FUNC_NLD8 (MTK_PIN_NO(25) | 1) +#define MT8135_PIN_25_NLD8__FUNC_EINT154 (MTK_PIN_NO(25) | 2) +#define MT8135_PIN_25_NLD8__FUNC_CM2DAT_1X_8 (MTK_PIN_NO(25) | 4) + +#define MT8135_PIN_26_NLD9__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define MT8135_PIN_26_NLD9__FUNC_NLD9 (MTK_PIN_NO(26) | 1) +#define MT8135_PIN_26_NLD9__FUNC_EINT155 (MTK_PIN_NO(26) | 2) +#define MT8135_PIN_26_NLD9__FUNC_CM2DAT_1X_9 (MTK_PIN_NO(26) | 4) +#define MT8135_PIN_26_NLD9__FUNC_PWM1 (MTK_PIN_NO(26) | 5) + +#define MT8135_PIN_27_NLD10__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define MT8135_PIN_27_NLD10__FUNC_NLD10 (MTK_PIN_NO(27) | 1) +#define MT8135_PIN_27_NLD10__FUNC_EINT156 (MTK_PIN_NO(27) | 2) +#define MT8135_PIN_27_NLD10__FUNC_CM2VSYNC_1X (MTK_PIN_NO(27) | 4) +#define MT8135_PIN_27_NLD10__FUNC_PWM2 (MTK_PIN_NO(27) | 5) + +#define MT8135_PIN_28_NLD11__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define MT8135_PIN_28_NLD11__FUNC_NLD11 (MTK_PIN_NO(28) | 1) +#define MT8135_PIN_28_NLD11__FUNC_EINT157 (MTK_PIN_NO(28) | 2) +#define MT8135_PIN_28_NLD11__FUNC_CM2HSYNC_1X (MTK_PIN_NO(28) | 4) +#define MT8135_PIN_28_NLD11__FUNC_PWM3 (MTK_PIN_NO(28) | 5) + +#define MT8135_PIN_29_NLD12__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define MT8135_PIN_29_NLD12__FUNC_NLD12 (MTK_PIN_NO(29) | 1) +#define MT8135_PIN_29_NLD12__FUNC_EINT158 (MTK_PIN_NO(29) | 2) +#define MT8135_PIN_29_NLD12__FUNC_I2SIN_CK (MTK_PIN_NO(29) | 3) +#define MT8135_PIN_29_NLD12__FUNC_DAC_CK (MTK_PIN_NO(29) | 4) +#define MT8135_PIN_29_NLD12__FUNC_PCM1_CK (MTK_PIN_NO(29) | 5) + +#define MT8135_PIN_30_NLD13__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) +#define MT8135_PIN_30_NLD13__FUNC_NLD13 (MTK_PIN_NO(30) | 1) +#define MT8135_PIN_30_NLD13__FUNC_EINT159 (MTK_PIN_NO(30) | 2) +#define MT8135_PIN_30_NLD13__FUNC_I2SIN_WS (MTK_PIN_NO(30) | 3) +#define MT8135_PIN_30_NLD13__FUNC_DAC_WS (MTK_PIN_NO(30) | 4) +#define MT8135_PIN_30_NLD13__FUNC_PCM1_WS (MTK_PIN_NO(30) | 5) + +#define MT8135_PIN_31_NLD14__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) +#define MT8135_PIN_31_NLD14__FUNC_NLD14 (MTK_PIN_NO(31) | 1) +#define MT8135_PIN_31_NLD14__FUNC_EINT160 (MTK_PIN_NO(31) | 2) +#define MT8135_PIN_31_NLD14__FUNC_I2SOUT_DAT (MTK_PIN_NO(31) | 3) +#define MT8135_PIN_31_NLD14__FUNC_DAC_DAT_OUT (MTK_PIN_NO(31) | 4) +#define MT8135_PIN_31_NLD14__FUNC_PCM1_DO (MTK_PIN_NO(31) | 5) + +#define MT8135_PIN_32_NLD15__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) +#define MT8135_PIN_32_NLD15__FUNC_NLD15 (MTK_PIN_NO(32) | 1) +#define MT8135_PIN_32_NLD15__FUNC_EINT161 (MTK_PIN_NO(32) | 2) +#define MT8135_PIN_32_NLD15__FUNC_DISP_PWM (MTK_PIN_NO(32) | 3) +#define MT8135_PIN_32_NLD15__FUNC_PWM4 (MTK_PIN_NO(32) | 4) +#define MT8135_PIN_32_NLD15__FUNC_PCM1_DI (MTK_PIN_NO(32) | 5) + +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(33) | 1) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_EINT50 (MTK_PIN_NO(33) | 2) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_I2SIN_DAT (MTK_PIN_NO(33) | 3) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_PCM1_DI (MTK_PIN_NO(33) | 5) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_SPI1_MI (MTK_PIN_NO(33) | 6) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_NLD10 (MTK_PIN_NO(33) | 7) + +#define MT8135_PIN_34_IDDIG__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define MT8135_PIN_34_IDDIG__FUNC_IDDIG (MTK_PIN_NO(34) | 1) +#define MT8135_PIN_34_IDDIG__FUNC_EINT34 (MTK_PIN_NO(34) | 2) + +#define MT8135_PIN_35_SCL3__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define MT8135_PIN_35_SCL3__FUNC_SCL3 (MTK_PIN_NO(35) | 1) +#define MT8135_PIN_35_SCL3__FUNC_EINT96 (MTK_PIN_NO(35) | 2) +#define MT8135_PIN_35_SCL3__FUNC_CLKM6 (MTK_PIN_NO(35) | 3) +#define MT8135_PIN_35_SCL3__FUNC_PWM6 (MTK_PIN_NO(35) | 4) + +#define MT8135_PIN_36_SDA3__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define MT8135_PIN_36_SDA3__FUNC_SDA3 (MTK_PIN_NO(36) | 1) +#define MT8135_PIN_36_SDA3__FUNC_EINT97 (MTK_PIN_NO(36) | 2) + +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_AUD_CLK (MTK_PIN_NO(37) | 1) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_ADC_CK (MTK_PIN_NO(37) | 2) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_HDMI_SDATA0 (MTK_PIN_NO(37) | 3) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_EINT19 (MTK_PIN_NO(37) | 4) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_USB_TEST_IO_6 (MTK_PIN_NO(37) | 5) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_TESTA_OUT19 (MTK_PIN_NO(37) | 7) + +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(38) | 1) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_ADC_WS (MTK_PIN_NO(38) | 2) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MISO (MTK_PIN_NO(38) | 3) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_EINT21 (MTK_PIN_NO(38) | 4) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_USB_TEST_IO_7 (MTK_PIN_NO(38) | 5) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_TESTA_OUT20 (MTK_PIN_NO(38) | 7) + +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MISO (MTK_PIN_NO(39) | 1) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_ADC_DAT_IN (MTK_PIN_NO(39) | 2) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(39) | 3) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_EINT20 (MTK_PIN_NO(39) | 4) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_USB_TEST_IO_8 (MTK_PIN_NO(39) | 5) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_TESTA_OUT21 (MTK_PIN_NO(39) | 7) + +#define MT8135_PIN_40_DAC_CLK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define MT8135_PIN_40_DAC_CLK__FUNC_DAC_CK (MTK_PIN_NO(40) | 1) +#define MT8135_PIN_40_DAC_CLK__FUNC_EINT22 (MTK_PIN_NO(40) | 2) +#define MT8135_PIN_40_DAC_CLK__FUNC_HDMI_SDATA1 (MTK_PIN_NO(40) | 3) +#define MT8135_PIN_40_DAC_CLK__FUNC_USB_TEST_IO_9 (MTK_PIN_NO(40) | 5) +#define MT8135_PIN_40_DAC_CLK__FUNC_TESTA_OUT22 (MTK_PIN_NO(40) | 7) + +#define MT8135_PIN_41_DAC_WS__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define MT8135_PIN_41_DAC_WS__FUNC_DAC_WS (MTK_PIN_NO(41) | 1) +#define MT8135_PIN_41_DAC_WS__FUNC_EINT24 (MTK_PIN_NO(41) | 2) +#define MT8135_PIN_41_DAC_WS__FUNC_HDMI_SDATA2 (MTK_PIN_NO(41) | 3) +#define MT8135_PIN_41_DAC_WS__FUNC_USB_TEST_IO_10 (MTK_PIN_NO(41) | 5) +#define MT8135_PIN_41_DAC_WS__FUNC_TESTA_OUT23 (MTK_PIN_NO(41) | 7) + +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(42) | 1) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_EINT23 (MTK_PIN_NO(42) | 2) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_HDMI_SDATA3 (MTK_PIN_NO(42) | 3) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_USB_TEST_IO_11 (MTK_PIN_NO(42) | 5) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_TESTA_OUT24 (MTK_PIN_NO(42) | 7) + +#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(43) | 1) +#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_EINT29 (MTK_PIN_NO(43) | 2) + +#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(44) | 1) +#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_EINT28 (MTK_PIN_NO(44) | 2) + +#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(45) | 1) +#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_EINT27 (MTK_PIN_NO(45) | 2) + +#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(46) | 1) +#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_EINT26 (MTK_PIN_NO(46) | 2) + +#define MT8135_PIN_47_PWRAP_EVENT__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define MT8135_PIN_47_PWRAP_EVENT__FUNC_PWRAP_EVENT_IN (MTK_PIN_NO(47) | 1) +#define MT8135_PIN_47_PWRAP_EVENT__FUNC_EINT25 (MTK_PIN_NO(47) | 2) +#define MT8135_PIN_47_PWRAP_EVENT__FUNC_TESTA_OUT2 (MTK_PIN_NO(47) | 7) + +#define MT8135_PIN_48_RTC32K_CK__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define MT8135_PIN_48_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(48) | 1) + +#define MT8135_PIN_49_WATCHDOG__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define MT8135_PIN_49_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(49) | 1) +#define MT8135_PIN_49_WATCHDOG__FUNC_EINT36 (MTK_PIN_NO(49) | 2) + +#define MT8135_PIN_50_SRCLKENA__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) +#define MT8135_PIN_50_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(50) | 1) +#define MT8135_PIN_50_SRCLKENA__FUNC_EINT38 (MTK_PIN_NO(50) | 2) + +#define MT8135_PIN_51_SRCVOLTEN__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) +#define MT8135_PIN_51_SRCVOLTEN__FUNC_SRCVOLTEN (MTK_PIN_NO(51) | 1) +#define MT8135_PIN_51_SRCVOLTEN__FUNC_EINT37 (MTK_PIN_NO(51) | 2) + +#define MT8135_PIN_52_EINT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) +#define MT8135_PIN_52_EINT0__FUNC_EINT0 (MTK_PIN_NO(52) | 1) +#define MT8135_PIN_52_EINT0__FUNC_PWM1 (MTK_PIN_NO(52) | 2) +#define MT8135_PIN_52_EINT0__FUNC_CLKM0 (MTK_PIN_NO(52) | 3) +#define MT8135_PIN_52_EINT0__FUNC_SPDIF_OUT (MTK_PIN_NO(52) | 4) +#define MT8135_PIN_52_EINT0__FUNC_USB_TEST_IO_12 (MTK_PIN_NO(52) | 5) +#define MT8135_PIN_52_EINT0__FUNC_USB_SCL (MTK_PIN_NO(52) | 7) + +#define MT8135_PIN_53_URXD2__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define MT8135_PIN_53_URXD2__FUNC_URXD2 (MTK_PIN_NO(53) | 1) +#define MT8135_PIN_53_URXD2__FUNC_EINT83 (MTK_PIN_NO(53) | 2) +#define MT8135_PIN_53_URXD2__FUNC_HDMI_LRCK (MTK_PIN_NO(53) | 4) +#define MT8135_PIN_53_URXD2__FUNC_CLKM3 (MTK_PIN_NO(53) | 5) +#define MT8135_PIN_53_URXD2__FUNC_UTXD2 (MTK_PIN_NO(53) | 7) + +#define MT8135_PIN_54_UTXD2__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define MT8135_PIN_54_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(54) | 1) +#define MT8135_PIN_54_UTXD2__FUNC_EINT82 (MTK_PIN_NO(54) | 2) +#define MT8135_PIN_54_UTXD2__FUNC_HDMI_BCK_OUT (MTK_PIN_NO(54) | 4) +#define MT8135_PIN_54_UTXD2__FUNC_CLKM2 (MTK_PIN_NO(54) | 5) +#define MT8135_PIN_54_UTXD2__FUNC_URXD2 (MTK_PIN_NO(54) | 7) + +#define MT8135_PIN_55_UCTS2__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define MT8135_PIN_55_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(55) | 1) +#define MT8135_PIN_55_UCTS2__FUNC_EINT84 (MTK_PIN_NO(55) | 2) +#define MT8135_PIN_55_UCTS2__FUNC_PWM1 (MTK_PIN_NO(55) | 5) +#define MT8135_PIN_55_UCTS2__FUNC_URTS2 (MTK_PIN_NO(55) | 7) + +#define MT8135_PIN_56_URTS2__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define MT8135_PIN_56_URTS2__FUNC_URTS2 (MTK_PIN_NO(56) | 1) +#define MT8135_PIN_56_URTS2__FUNC_EINT85 (MTK_PIN_NO(56) | 2) +#define MT8135_PIN_56_URTS2__FUNC_PWM2 (MTK_PIN_NO(56) | 5) +#define MT8135_PIN_56_URTS2__FUNC_UCTS2 (MTK_PIN_NO(56) | 7) + +#define MT8135_PIN_57_JTCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT8135_PIN_57_JTCK__FUNC_JTCK (MTK_PIN_NO(57) | 1) +#define MT8135_PIN_57_JTCK__FUNC_EINT188 (MTK_PIN_NO(57) | 2) +#define MT8135_PIN_57_JTCK__FUNC_DSP1_ICK (MTK_PIN_NO(57) | 3) + +#define MT8135_PIN_58_JTDO__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT8135_PIN_58_JTDO__FUNC_JTDO (MTK_PIN_NO(58) | 1) +#define MT8135_PIN_58_JTDO__FUNC_EINT190 (MTK_PIN_NO(58) | 2) +#define MT8135_PIN_58_JTDO__FUNC_DSP2_IMS (MTK_PIN_NO(58) | 3) + +#define MT8135_PIN_59_JTRST_B__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) +#define MT8135_PIN_59_JTRST_B__FUNC_JTRST_B (MTK_PIN_NO(59) | 1) +#define MT8135_PIN_59_JTRST_B__FUNC_EINT0 (MTK_PIN_NO(59) | 2) +#define MT8135_PIN_59_JTRST_B__FUNC_DSP2_ICK (MTK_PIN_NO(59) | 3) + +#define MT8135_PIN_60_JTDI__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) +#define MT8135_PIN_60_JTDI__FUNC_JTDI (MTK_PIN_NO(60) | 1) +#define MT8135_PIN_60_JTDI__FUNC_EINT189 (MTK_PIN_NO(60) | 2) +#define MT8135_PIN_60_JTDI__FUNC_DSP1_IMS (MTK_PIN_NO(60) | 3) + +#define MT8135_PIN_61_JRTCK__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) +#define MT8135_PIN_61_JRTCK__FUNC_JRTCK (MTK_PIN_NO(61) | 1) +#define MT8135_PIN_61_JRTCK__FUNC_EINT187 (MTK_PIN_NO(61) | 2) +#define MT8135_PIN_61_JRTCK__FUNC_DSP1_ID (MTK_PIN_NO(61) | 3) + +#define MT8135_PIN_62_JTMS__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) +#define MT8135_PIN_62_JTMS__FUNC_JTMS (MTK_PIN_NO(62) | 1) +#define MT8135_PIN_62_JTMS__FUNC_EINT191 (MTK_PIN_NO(62) | 2) +#define MT8135_PIN_62_JTMS__FUNC_DSP2_ID (MTK_PIN_NO(62) | 3) + +#define MT8135_PIN_63_MSDC1_INSI__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_MSDC1_INSI (MTK_PIN_NO(63) | 1) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_SCL5 (MTK_PIN_NO(63) | 3) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_PWM6 (MTK_PIN_NO(63) | 4) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_CLKM5 (MTK_PIN_NO(63) | 5) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_TESTB_OUT6 (MTK_PIN_NO(63) | 7) + +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_MSDC1_SDWPI (MTK_PIN_NO(64) | 1) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_EINT58 (MTK_PIN_NO(64) | 2) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_SDA5 (MTK_PIN_NO(64) | 3) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_PWM7 (MTK_PIN_NO(64) | 4) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_CLKM6 (MTK_PIN_NO(64) | 5) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_TESTB_OUT7 (MTK_PIN_NO(64) | 7) + +#define MT8135_PIN_65_MSDC2_INSI__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) +#define MT8135_PIN_65_MSDC2_INSI__FUNC_MSDC2_INSI (MTK_PIN_NO(65) | 1) +#define MT8135_PIN_65_MSDC2_INSI__FUNC_USB_TEST_IO_27 (MTK_PIN_NO(65) | 5) +#define MT8135_PIN_65_MSDC2_INSI__FUNC_TESTA_OUT3 (MTK_PIN_NO(65) | 7) + +#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_GPIO66 (MTK_PIN_NO(66) | 0) +#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_MSDC2_SDWPI (MTK_PIN_NO(66) | 1) +#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_EINT66 (MTK_PIN_NO(66) | 2) +#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_USB_TEST_IO_28 (MTK_PIN_NO(66) | 5) + +#define MT8135_PIN_67_URXD4__FUNC_GPIO67 (MTK_PIN_NO(67) | 0) +#define MT8135_PIN_67_URXD4__FUNC_URXD4 (MTK_PIN_NO(67) | 1) +#define MT8135_PIN_67_URXD4__FUNC_EINT89 (MTK_PIN_NO(67) | 2) +#define MT8135_PIN_67_URXD4__FUNC_URXD1 (MTK_PIN_NO(67) | 3) +#define MT8135_PIN_67_URXD4__FUNC_UTXD4 (MTK_PIN_NO(67) | 6) +#define MT8135_PIN_67_URXD4__FUNC_TESTB_OUT10 (MTK_PIN_NO(67) | 7) + +#define MT8135_PIN_68_UTXD4__FUNC_GPIO68 (MTK_PIN_NO(68) | 0) +#define MT8135_PIN_68_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(68) | 1) +#define MT8135_PIN_68_UTXD4__FUNC_EINT88 (MTK_PIN_NO(68) | 2) +#define MT8135_PIN_68_UTXD4__FUNC_UTXD1 (MTK_PIN_NO(68) | 3) +#define MT8135_PIN_68_UTXD4__FUNC_URXD4 (MTK_PIN_NO(68) | 6) +#define MT8135_PIN_68_UTXD4__FUNC_TESTB_OUT11 (MTK_PIN_NO(68) | 7) + +#define MT8135_PIN_69_URXD1__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) +#define MT8135_PIN_69_URXD1__FUNC_URXD1 (MTK_PIN_NO(69) | 1) +#define MT8135_PIN_69_URXD1__FUNC_EINT79 (MTK_PIN_NO(69) | 2) +#define MT8135_PIN_69_URXD1__FUNC_URXD4 (MTK_PIN_NO(69) | 3) +#define MT8135_PIN_69_URXD1__FUNC_UTXD1 (MTK_PIN_NO(69) | 6) +#define MT8135_PIN_69_URXD1__FUNC_TESTB_OUT24 (MTK_PIN_NO(69) | 7) + +#define MT8135_PIN_70_UTXD1__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) +#define MT8135_PIN_70_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(70) | 1) +#define MT8135_PIN_70_UTXD1__FUNC_EINT78 (MTK_PIN_NO(70) | 2) +#define MT8135_PIN_70_UTXD1__FUNC_UTXD4 (MTK_PIN_NO(70) | 3) +#define MT8135_PIN_70_UTXD1__FUNC_URXD1 (MTK_PIN_NO(70) | 6) +#define MT8135_PIN_70_UTXD1__FUNC_TESTB_OUT25 (MTK_PIN_NO(70) | 7) + +#define MT8135_PIN_71_UCTS1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) +#define MT8135_PIN_71_UCTS1__FUNC_UCTS1 (MTK_PIN_NO(71) | 1) +#define MT8135_PIN_71_UCTS1__FUNC_EINT80 (MTK_PIN_NO(71) | 2) +#define MT8135_PIN_71_UCTS1__FUNC_CLKM0 (MTK_PIN_NO(71) | 5) +#define MT8135_PIN_71_UCTS1__FUNC_URTS1 (MTK_PIN_NO(71) | 6) +#define MT8135_PIN_71_UCTS1__FUNC_TESTB_OUT31 (MTK_PIN_NO(71) | 7) + +#define MT8135_PIN_72_URTS1__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define MT8135_PIN_72_URTS1__FUNC_URTS1 (MTK_PIN_NO(72) | 1) +#define MT8135_PIN_72_URTS1__FUNC_EINT81 (MTK_PIN_NO(72) | 2) +#define MT8135_PIN_72_URTS1__FUNC_CLKM1 (MTK_PIN_NO(72) | 5) +#define MT8135_PIN_72_URTS1__FUNC_UCTS1 (MTK_PIN_NO(72) | 6) +#define MT8135_PIN_72_URTS1__FUNC_TESTB_OUT21 (MTK_PIN_NO(72) | 7) + +#define MT8135_PIN_73_PWM1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define MT8135_PIN_73_PWM1__FUNC_PWM1 (MTK_PIN_NO(73) | 1) +#define MT8135_PIN_73_PWM1__FUNC_EINT73 (MTK_PIN_NO(73) | 2) +#define MT8135_PIN_73_PWM1__FUNC_USB_DRVVBUS (MTK_PIN_NO(73) | 5) +#define MT8135_PIN_73_PWM1__FUNC_DISP_PWM (MTK_PIN_NO(73) | 6) +#define MT8135_PIN_73_PWM1__FUNC_TESTB_OUT8 (MTK_PIN_NO(73) | 7) + +#define MT8135_PIN_74_PWM2__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define MT8135_PIN_74_PWM2__FUNC_PWM2 (MTK_PIN_NO(74) | 1) +#define MT8135_PIN_74_PWM2__FUNC_EINT74 (MTK_PIN_NO(74) | 2) +#define MT8135_PIN_74_PWM2__FUNC_DPI33_CK (MTK_PIN_NO(74) | 3) +#define MT8135_PIN_74_PWM2__FUNC_PWM5 (MTK_PIN_NO(74) | 4) +#define MT8135_PIN_74_PWM2__FUNC_URXD2 (MTK_PIN_NO(74) | 5) +#define MT8135_PIN_74_PWM2__FUNC_DISP_PWM (MTK_PIN_NO(74) | 6) +#define MT8135_PIN_74_PWM2__FUNC_TESTB_OUT9 (MTK_PIN_NO(74) | 7) + +#define MT8135_PIN_75_PWM3__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define MT8135_PIN_75_PWM3__FUNC_PWM3 (MTK_PIN_NO(75) | 1) +#define MT8135_PIN_75_PWM3__FUNC_EINT75 (MTK_PIN_NO(75) | 2) +#define MT8135_PIN_75_PWM3__FUNC_DPI33_D0 (MTK_PIN_NO(75) | 3) +#define MT8135_PIN_75_PWM3__FUNC_PWM6 (MTK_PIN_NO(75) | 4) +#define MT8135_PIN_75_PWM3__FUNC_UTXD2 (MTK_PIN_NO(75) | 5) +#define MT8135_PIN_75_PWM3__FUNC_DISP_PWM (MTK_PIN_NO(75) | 6) +#define MT8135_PIN_75_PWM3__FUNC_TESTB_OUT12 (MTK_PIN_NO(75) | 7) + +#define MT8135_PIN_76_PWM4__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define MT8135_PIN_76_PWM4__FUNC_PWM4 (MTK_PIN_NO(76) | 1) +#define MT8135_PIN_76_PWM4__FUNC_EINT76 (MTK_PIN_NO(76) | 2) +#define MT8135_PIN_76_PWM4__FUNC_DPI33_D1 (MTK_PIN_NO(76) | 3) +#define MT8135_PIN_76_PWM4__FUNC_PWM7 (MTK_PIN_NO(76) | 4) +#define MT8135_PIN_76_PWM4__FUNC_DISP_PWM (MTK_PIN_NO(76) | 6) +#define MT8135_PIN_76_PWM4__FUNC_TESTB_OUT13 (MTK_PIN_NO(76) | 7) + +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(77) | 1) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_EINT63 (MTK_PIN_NO(77) | 2) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DSP2_IMS (MTK_PIN_NO(77) | 4) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DPI33_D6 (MTK_PIN_NO(77) | 6) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_TESTA_OUT25 (MTK_PIN_NO(77) | 7) + +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(78) | 1) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_EINT64 (MTK_PIN_NO(78) | 2) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DSP2_ID (MTK_PIN_NO(78) | 4) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DPI33_D7 (MTK_PIN_NO(78) | 6) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_TESTA_OUT26 (MTK_PIN_NO(78) | 7) + +#define MT8135_PIN_79_MSDC2_CMD__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(79) | 1) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_EINT60 (MTK_PIN_NO(79) | 2) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_DSP1_IMS (MTK_PIN_NO(79) | 4) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_PCM1_WS (MTK_PIN_NO(79) | 5) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_DPI33_D3 (MTK_PIN_NO(79) | 6) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_TESTA_OUT0 (MTK_PIN_NO(79) | 7) + +#define MT8135_PIN_80_MSDC2_CLK__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(80) | 1) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_EINT59 (MTK_PIN_NO(80) | 2) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_DSP1_ICK (MTK_PIN_NO(80) | 4) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_PCM1_CK (MTK_PIN_NO(80) | 5) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_DPI33_D2 (MTK_PIN_NO(80) | 6) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_TESTA_OUT1 (MTK_PIN_NO(80) | 7) + +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(81) | 1) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_EINT62 (MTK_PIN_NO(81) | 2) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DSP2_ICK (MTK_PIN_NO(81) | 4) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_PCM1_DO (MTK_PIN_NO(81) | 5) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DPI33_D5 (MTK_PIN_NO(81) | 6) + +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(82) | 1) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_EINT61 (MTK_PIN_NO(82) | 2) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DSP1_ID (MTK_PIN_NO(82) | 4) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_PCM1_DI (MTK_PIN_NO(82) | 5) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DPI33_D4 (MTK_PIN_NO(82) | 6) + +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(83) | 1) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_EINT53 (MTK_PIN_NO(83) | 2) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_SCL1 (MTK_PIN_NO(83) | 3) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_PWM2 (MTK_PIN_NO(83) | 4) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_CLKM1 (MTK_PIN_NO(83) | 5) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_TESTB_OUT2 (MTK_PIN_NO(83) | 7) + +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(84) | 1) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_EINT54 (MTK_PIN_NO(84) | 2) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_SDA1 (MTK_PIN_NO(84) | 3) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_PWM3 (MTK_PIN_NO(84) | 4) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_CLKM2 (MTK_PIN_NO(84) | 5) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_TESTB_OUT3 (MTK_PIN_NO(84) | 7) + +#define MT8135_PIN_85_MSDC1_CMD__FUNC_GPIO85 (MTK_PIN_NO(85) | 0) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(85) | 1) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_EINT52 (MTK_PIN_NO(85) | 2) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_SDA0 (MTK_PIN_NO(85) | 3) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_PWM1 (MTK_PIN_NO(85) | 4) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_CLKM0 (MTK_PIN_NO(85) | 5) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_TESTB_OUT1 (MTK_PIN_NO(85) | 7) + +#define MT8135_PIN_86_MSDC1_CLK__FUNC_GPIO86 (MTK_PIN_NO(86) | 0) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(86) | 1) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_EINT51 (MTK_PIN_NO(86) | 2) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_SCL0 (MTK_PIN_NO(86) | 3) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_DISP_PWM (MTK_PIN_NO(86) | 4) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_TESTB_OUT0 (MTK_PIN_NO(86) | 7) + +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_GPIO87 (MTK_PIN_NO(87) | 0) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(87) | 1) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_EINT55 (MTK_PIN_NO(87) | 2) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_SCL4 (MTK_PIN_NO(87) | 3) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_PWM4 (MTK_PIN_NO(87) | 4) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_CLKM3 (MTK_PIN_NO(87) | 5) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_TESTB_OUT4 (MTK_PIN_NO(87) | 7) + +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_GPIO88 (MTK_PIN_NO(88) | 0) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(88) | 1) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_EINT56 (MTK_PIN_NO(88) | 2) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_SDA4 (MTK_PIN_NO(88) | 3) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_PWM5 (MTK_PIN_NO(88) | 4) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_CLKM4 (MTK_PIN_NO(88) | 5) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_TESTB_OUT5 (MTK_PIN_NO(88) | 7) + +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_GPIO89 (MTK_PIN_NO(89) | 0) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_MSDC4_DAT0 (MTK_PIN_NO(89) | 1) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EINT133 (MTK_PIN_NO(89) | 2) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(89) | 4) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_USB_DRVVBUS (MTK_PIN_NO(89) | 5) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_A_FUNC_DIN_9 (MTK_PIN_NO(89) | 6) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_LPTE (MTK_PIN_NO(89) | 7) + +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_GPIO90 (MTK_PIN_NO(90) | 0) +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_MSDC4_DAT1 (MTK_PIN_NO(90) | 1) +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_EINT134 (MTK_PIN_NO(90) | 2) +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_A_FUNC_DIN_10 (MTK_PIN_NO(90) | 6) +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_LRSTB_1X (MTK_PIN_NO(90) | 7) + +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_GPIO91 (MTK_PIN_NO(91) | 0) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_MSDC4_DAT5 (MTK_PIN_NO(91) | 1) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_EINT136 (MTK_PIN_NO(91) | 2) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_I2SIN_WS (MTK_PIN_NO(91) | 3) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_DAC_WS (MTK_PIN_NO(91) | 4) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_PCM1_WS (MTK_PIN_NO(91) | 5) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_A_FUNC_DIN_11 (MTK_PIN_NO(91) | 6) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_SPI1_CSN (MTK_PIN_NO(91) | 7) + +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_GPIO92 (MTK_PIN_NO(92) | 0) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_MSDC4_DAT6 (MTK_PIN_NO(92) | 1) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_EINT137 (MTK_PIN_NO(92) | 2) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_I2SOUT_DAT (MTK_PIN_NO(92) | 3) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_DAC_DAT_OUT (MTK_PIN_NO(92) | 4) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_PCM1_DO (MTK_PIN_NO(92) | 5) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_A_FUNC_DIN_12 (MTK_PIN_NO(92) | 6) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_SPI1_MO (MTK_PIN_NO(92) | 7) + +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_GPIO93 (MTK_PIN_NO(93) | 0) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_MSDC4_DAT7 (MTK_PIN_NO(93) | 1) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_EINT138 (MTK_PIN_NO(93) | 2) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_I2SIN_DAT (MTK_PIN_NO(93) | 3) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_PCM1_DI (MTK_PIN_NO(93) | 5) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_A_FUNC_DIN_13 (MTK_PIN_NO(93) | 6) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_SPI1_MI (MTK_PIN_NO(93) | 7) + +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_GPIO94 (MTK_PIN_NO(94) | 0) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_MSDC4_DAT4 (MTK_PIN_NO(94) | 1) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_EINT135 (MTK_PIN_NO(94) | 2) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_I2SIN_CK (MTK_PIN_NO(94) | 3) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_DAC_CK (MTK_PIN_NO(94) | 4) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_PCM1_CK (MTK_PIN_NO(94) | 5) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_A_FUNC_DIN_14 (MTK_PIN_NO(94) | 6) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_SPI1_CLK (MTK_PIN_NO(94) | 7) + +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_GPIO95 (MTK_PIN_NO(95) | 0) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_MSDC4_DAT2 (MTK_PIN_NO(95) | 1) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_EINT131 (MTK_PIN_NO(95) | 2) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_I2SIN_WS (MTK_PIN_NO(95) | 3) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_CM2PDN_2X (MTK_PIN_NO(95) | 4) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_DAC_WS (MTK_PIN_NO(95) | 5) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_PCM1_WS (MTK_PIN_NO(95) | 6) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_LSCE0B_1X (MTK_PIN_NO(95) | 7) + +#define MT8135_PIN_96_MSDC4_CLK__FUNC_GPIO96 (MTK_PIN_NO(96) | 0) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_MSDC4_CLK (MTK_PIN_NO(96) | 1) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_EINT129 (MTK_PIN_NO(96) | 2) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_DPI1_CK_2X (MTK_PIN_NO(96) | 3) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_CM2PCLK_2X (MTK_PIN_NO(96) | 4) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_PWM4 (MTK_PIN_NO(96) | 5) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_PCM1_DI (MTK_PIN_NO(96) | 6) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_LSCK_1X (MTK_PIN_NO(96) | 7) + +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_GPIO97 (MTK_PIN_NO(97) | 0) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_MSDC4_DAT3 (MTK_PIN_NO(97) | 1) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_EINT132 (MTK_PIN_NO(97) | 2) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_I2SOUT_DAT (MTK_PIN_NO(97) | 3) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_CM2RST_2X (MTK_PIN_NO(97) | 4) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_DAC_DAT_OUT (MTK_PIN_NO(97) | 5) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_PCM1_DO (MTK_PIN_NO(97) | 6) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_LSCE1B_1X (MTK_PIN_NO(97) | 7) + +#define MT8135_PIN_98_MSDC4_CMD__FUNC_GPIO98 (MTK_PIN_NO(98) | 0) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_MSDC4_CMD (MTK_PIN_NO(98) | 1) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_EINT128 (MTK_PIN_NO(98) | 2) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_DPI1_DE_2X (MTK_PIN_NO(98) | 3) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_PWM3 (MTK_PIN_NO(98) | 5) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_LSDA_1X (MTK_PIN_NO(98) | 7) + +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_GPIO99 (MTK_PIN_NO(99) | 0) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_MSDC4_RSTB (MTK_PIN_NO(99) | 1) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_EINT130 (MTK_PIN_NO(99) | 2) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_I2SIN_CK (MTK_PIN_NO(99) | 3) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_CM2MCLK_2X (MTK_PIN_NO(99) | 4) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_DAC_CK (MTK_PIN_NO(99) | 5) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_PCM1_CK (MTK_PIN_NO(99) | 6) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_LSA0_1X (MTK_PIN_NO(99) | 7) + +#define MT8135_PIN_100_SDA0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) +#define MT8135_PIN_100_SDA0__FUNC_SDA0 (MTK_PIN_NO(100) | 1) +#define MT8135_PIN_100_SDA0__FUNC_EINT91 (MTK_PIN_NO(100) | 2) +#define MT8135_PIN_100_SDA0__FUNC_CLKM1 (MTK_PIN_NO(100) | 3) +#define MT8135_PIN_100_SDA0__FUNC_PWM1 (MTK_PIN_NO(100) | 4) +#define MT8135_PIN_100_SDA0__FUNC_A_FUNC_DIN_15 (MTK_PIN_NO(100) | 7) + +#define MT8135_PIN_101_SCL0__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define MT8135_PIN_101_SCL0__FUNC_SCL0 (MTK_PIN_NO(101) | 1) +#define MT8135_PIN_101_SCL0__FUNC_EINT90 (MTK_PIN_NO(101) | 2) +#define MT8135_PIN_101_SCL0__FUNC_CLKM0 (MTK_PIN_NO(101) | 3) +#define MT8135_PIN_101_SCL0__FUNC_DISP_PWM (MTK_PIN_NO(101) | 4) +#define MT8135_PIN_101_SCL0__FUNC_A_FUNC_DIN_16 (MTK_PIN_NO(101) | 7) + +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_EINT10 (MTK_PIN_NO(102) | 1) +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_USB_TEST_IO_16 (MTK_PIN_NO(102) | 5) +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_TESTB_OUT16 (MTK_PIN_NO(102) | 6) +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_A_FUNC_DIN_17 (MTK_PIN_NO(102) | 7) + +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_EINT11 (MTK_PIN_NO(103) | 1) +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_USB_TEST_IO_17 (MTK_PIN_NO(103) | 5) +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_TESTB_OUT17 (MTK_PIN_NO(103) | 6) +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_A_FUNC_DIN_18 (MTK_PIN_NO(103) | 7) + +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_EINT16 (MTK_PIN_NO(104) | 1) +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_USB_TEST_IO_18 (MTK_PIN_NO(104) | 5) +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_TESTB_OUT18 (MTK_PIN_NO(104) | 6) +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_A_FUNC_DIN_19 (MTK_PIN_NO(104) | 7) + +#define MT8135_PIN_105_I2S_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define MT8135_PIN_105_I2S_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(105) | 1) +#define MT8135_PIN_105_I2S_CLK__FUNC_EINT10 (MTK_PIN_NO(105) | 2) +#define MT8135_PIN_105_I2S_CLK__FUNC_DAC_CK (MTK_PIN_NO(105) | 3) +#define MT8135_PIN_105_I2S_CLK__FUNC_PCM1_CK (MTK_PIN_NO(105) | 4) +#define MT8135_PIN_105_I2S_CLK__FUNC_USB_TEST_IO_19 (MTK_PIN_NO(105) | 5) +#define MT8135_PIN_105_I2S_CLK__FUNC_TESTB_OUT19 (MTK_PIN_NO(105) | 6) +#define MT8135_PIN_105_I2S_CLK__FUNC_A_FUNC_DIN_20 (MTK_PIN_NO(105) | 7) + +#define MT8135_PIN_106_I2S_WS__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define MT8135_PIN_106_I2S_WS__FUNC_I2SIN_WS (MTK_PIN_NO(106) | 1) +#define MT8135_PIN_106_I2S_WS__FUNC_EINT13 (MTK_PIN_NO(106) | 2) +#define MT8135_PIN_106_I2S_WS__FUNC_DAC_WS (MTK_PIN_NO(106) | 3) +#define MT8135_PIN_106_I2S_WS__FUNC_PCM1_WS (MTK_PIN_NO(106) | 4) +#define MT8135_PIN_106_I2S_WS__FUNC_USB_TEST_IO_20 (MTK_PIN_NO(106) | 5) +#define MT8135_PIN_106_I2S_WS__FUNC_TESTB_OUT20 (MTK_PIN_NO(106) | 6) +#define MT8135_PIN_106_I2S_WS__FUNC_A_FUNC_DIN_21 (MTK_PIN_NO(106) | 7) + +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_I2SIN_DAT (MTK_PIN_NO(107) | 1) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_EINT11 (MTK_PIN_NO(107) | 2) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_PCM1_DI (MTK_PIN_NO(107) | 4) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_USB_TEST_IO_21 (MTK_PIN_NO(107) | 5) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_TESTB_OUT22 (MTK_PIN_NO(107) | 6) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_A_FUNC_DIN_22 (MTK_PIN_NO(107) | 7) + +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_I2SOUT_DAT (MTK_PIN_NO(108) | 1) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_EINT12 (MTK_PIN_NO(108) | 2) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(108) | 3) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_PCM1_DO (MTK_PIN_NO(108) | 4) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_USB_TEST_IO_22 (MTK_PIN_NO(108) | 5) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_TESTB_OUT23 (MTK_PIN_NO(108) | 6) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_A_FUNC_DIN_23 (MTK_PIN_NO(108) | 7) + +#define MT8135_PIN_109_EINT5__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define MT8135_PIN_109_EINT5__FUNC_EINT5 (MTK_PIN_NO(109) | 1) +#define MT8135_PIN_109_EINT5__FUNC_PWM5 (MTK_PIN_NO(109) | 2) +#define MT8135_PIN_109_EINT5__FUNC_CLKM3 (MTK_PIN_NO(109) | 3) +#define MT8135_PIN_109_EINT5__FUNC_GPU_JTRSTB (MTK_PIN_NO(109) | 4) +#define MT8135_PIN_109_EINT5__FUNC_USB_TEST_IO_23 (MTK_PIN_NO(109) | 5) +#define MT8135_PIN_109_EINT5__FUNC_TESTB_OUT26 (MTK_PIN_NO(109) | 6) +#define MT8135_PIN_109_EINT5__FUNC_A_FUNC_DIN_24 (MTK_PIN_NO(109) | 7) + +#define MT8135_PIN_110_EINT6__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define MT8135_PIN_110_EINT6__FUNC_EINT6 (MTK_PIN_NO(110) | 1) +#define MT8135_PIN_110_EINT6__FUNC_PWM6 (MTK_PIN_NO(110) | 2) +#define MT8135_PIN_110_EINT6__FUNC_CLKM4 (MTK_PIN_NO(110) | 3) +#define MT8135_PIN_110_EINT6__FUNC_GPU_JTMS (MTK_PIN_NO(110) | 4) +#define MT8135_PIN_110_EINT6__FUNC_USB_TEST_IO_24 (MTK_PIN_NO(110) | 5) +#define MT8135_PIN_110_EINT6__FUNC_TESTB_OUT27 (MTK_PIN_NO(110) | 6) +#define MT8135_PIN_110_EINT6__FUNC_A_FUNC_DIN_25 (MTK_PIN_NO(110) | 7) + +#define MT8135_PIN_111_EINT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define MT8135_PIN_111_EINT7__FUNC_EINT7 (MTK_PIN_NO(111) | 1) +#define MT8135_PIN_111_EINT7__FUNC_PWM7 (MTK_PIN_NO(111) | 2) +#define MT8135_PIN_111_EINT7__FUNC_CLKM5 (MTK_PIN_NO(111) | 3) +#define MT8135_PIN_111_EINT7__FUNC_GPU_JTDO (MTK_PIN_NO(111) | 4) +#define MT8135_PIN_111_EINT7__FUNC_USB_TEST_IO_25 (MTK_PIN_NO(111) | 5) +#define MT8135_PIN_111_EINT7__FUNC_TESTB_OUT28 (MTK_PIN_NO(111) | 6) +#define MT8135_PIN_111_EINT7__FUNC_A_FUNC_DIN_26 (MTK_PIN_NO(111) | 7) + +#define MT8135_PIN_112_EINT8__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define MT8135_PIN_112_EINT8__FUNC_EINT8 (MTK_PIN_NO(112) | 1) +#define MT8135_PIN_112_EINT8__FUNC_DISP_PWM (MTK_PIN_NO(112) | 2) +#define MT8135_PIN_112_EINT8__FUNC_CLKM6 (MTK_PIN_NO(112) | 3) +#define MT8135_PIN_112_EINT8__FUNC_GPU_JTDI (MTK_PIN_NO(112) | 4) +#define MT8135_PIN_112_EINT8__FUNC_USB_TEST_IO_26 (MTK_PIN_NO(112) | 5) +#define MT8135_PIN_112_EINT8__FUNC_TESTB_OUT29 (MTK_PIN_NO(112) | 6) +#define MT8135_PIN_112_EINT8__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(112) | 7) + +#define MT8135_PIN_113_EINT9__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define MT8135_PIN_113_EINT9__FUNC_EINT9 (MTK_PIN_NO(113) | 1) +#define MT8135_PIN_113_EINT9__FUNC_GPU_JTCK (MTK_PIN_NO(113) | 4) +#define MT8135_PIN_113_EINT9__FUNC_USB_DRVVBUS (MTK_PIN_NO(113) | 5) +#define MT8135_PIN_113_EINT9__FUNC_TESTB_OUT30 (MTK_PIN_NO(113) | 6) +#define MT8135_PIN_113_EINT9__FUNC_A_FUNC_DIN_27 (MTK_PIN_NO(113) | 7) + +#define MT8135_PIN_114_LPCE1B__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define MT8135_PIN_114_LPCE1B__FUNC_LPCE1B (MTK_PIN_NO(114) | 1) +#define MT8135_PIN_114_LPCE1B__FUNC_EINT127 (MTK_PIN_NO(114) | 2) +#define MT8135_PIN_114_LPCE1B__FUNC_PWM2 (MTK_PIN_NO(114) | 5) +#define MT8135_PIN_114_LPCE1B__FUNC_TESTB_OUT14 (MTK_PIN_NO(114) | 6) +#define MT8135_PIN_114_LPCE1B__FUNC_A_FUNC_DIN_28 (MTK_PIN_NO(114) | 7) + +#define MT8135_PIN_115_LPCE0B__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define MT8135_PIN_115_LPCE0B__FUNC_LPCE0B (MTK_PIN_NO(115) | 1) +#define MT8135_PIN_115_LPCE0B__FUNC_EINT126 (MTK_PIN_NO(115) | 2) +#define MT8135_PIN_115_LPCE0B__FUNC_PWM1 (MTK_PIN_NO(115) | 5) +#define MT8135_PIN_115_LPCE0B__FUNC_TESTB_OUT15 (MTK_PIN_NO(115) | 6) +#define MT8135_PIN_115_LPCE0B__FUNC_A_FUNC_DIN_29 (MTK_PIN_NO(115) | 7) + +#define MT8135_PIN_116_DISP_PWM__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define MT8135_PIN_116_DISP_PWM__FUNC_DISP_PWM (MTK_PIN_NO(116) | 1) +#define MT8135_PIN_116_DISP_PWM__FUNC_EINT77 (MTK_PIN_NO(116) | 2) +#define MT8135_PIN_116_DISP_PWM__FUNC_LSDI (MTK_PIN_NO(116) | 3) +#define MT8135_PIN_116_DISP_PWM__FUNC_PWM1 (MTK_PIN_NO(116) | 4) +#define MT8135_PIN_116_DISP_PWM__FUNC_PWM2 (MTK_PIN_NO(116) | 5) +#define MT8135_PIN_116_DISP_PWM__FUNC_PWM3 (MTK_PIN_NO(116) | 7) + +#define MT8135_PIN_117_EINT1__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define MT8135_PIN_117_EINT1__FUNC_EINT1 (MTK_PIN_NO(117) | 1) +#define MT8135_PIN_117_EINT1__FUNC_PWM2 (MTK_PIN_NO(117) | 2) +#define MT8135_PIN_117_EINT1__FUNC_CLKM1 (MTK_PIN_NO(117) | 3) +#define MT8135_PIN_117_EINT1__FUNC_USB_TEST_IO_13 (MTK_PIN_NO(117) | 5) +#define MT8135_PIN_117_EINT1__FUNC_USB_SDA (MTK_PIN_NO(117) | 7) + +#define MT8135_PIN_118_EINT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define MT8135_PIN_118_EINT2__FUNC_EINT2 (MTK_PIN_NO(118) | 1) +#define MT8135_PIN_118_EINT2__FUNC_PWM3 (MTK_PIN_NO(118) | 2) +#define MT8135_PIN_118_EINT2__FUNC_CLKM2 (MTK_PIN_NO(118) | 3) +#define MT8135_PIN_118_EINT2__FUNC_USB_TEST_IO_14 (MTK_PIN_NO(118) | 5) +#define MT8135_PIN_118_EINT2__FUNC_SRCLKENAI2 (MTK_PIN_NO(118) | 6) +#define MT8135_PIN_118_EINT2__FUNC_A_FUNC_DIN_30 (MTK_PIN_NO(118) | 7) + +#define MT8135_PIN_119_EINT3__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define MT8135_PIN_119_EINT3__FUNC_EINT3 (MTK_PIN_NO(119) | 1) +#define MT8135_PIN_119_EINT3__FUNC_USB_TEST_IO_15 (MTK_PIN_NO(119) | 5) +#define MT8135_PIN_119_EINT3__FUNC_SRCLKENAI1 (MTK_PIN_NO(119) | 6) +#define MT8135_PIN_119_EINT3__FUNC_EXT_26M_CK (MTK_PIN_NO(119) | 7) + +#define MT8135_PIN_120_EINT4__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define MT8135_PIN_120_EINT4__FUNC_EINT4 (MTK_PIN_NO(120) | 1) +#define MT8135_PIN_120_EINT4__FUNC_PWM4 (MTK_PIN_NO(120) | 2) +#define MT8135_PIN_120_EINT4__FUNC_USB_DRVVBUS (MTK_PIN_NO(120) | 5) +#define MT8135_PIN_120_EINT4__FUNC_A_FUNC_DIN_31 (MTK_PIN_NO(120) | 7) + +#define MT8135_PIN_121_DPIDE__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define MT8135_PIN_121_DPIDE__FUNC_DPI0_DE (MTK_PIN_NO(121) | 1) +#define MT8135_PIN_121_DPIDE__FUNC_EINT100 (MTK_PIN_NO(121) | 2) +#define MT8135_PIN_121_DPIDE__FUNC_I2SOUT_DAT (MTK_PIN_NO(121) | 3) +#define MT8135_PIN_121_DPIDE__FUNC_DAC_DAT_OUT (MTK_PIN_NO(121) | 4) +#define MT8135_PIN_121_DPIDE__FUNC_PCM1_DO (MTK_PIN_NO(121) | 5) +#define MT8135_PIN_121_DPIDE__FUNC_IRDA_TXD (MTK_PIN_NO(121) | 6) + +#define MT8135_PIN_122_DPICK__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define MT8135_PIN_122_DPICK__FUNC_DPI0_CK (MTK_PIN_NO(122) | 1) +#define MT8135_PIN_122_DPICK__FUNC_EINT101 (MTK_PIN_NO(122) | 2) +#define MT8135_PIN_122_DPICK__FUNC_I2SIN_DAT (MTK_PIN_NO(122) | 3) +#define MT8135_PIN_122_DPICK__FUNC_PCM1_DI (MTK_PIN_NO(122) | 5) +#define MT8135_PIN_122_DPICK__FUNC_IRDA_PDN (MTK_PIN_NO(122) | 6) + +#define MT8135_PIN_123_DPIG4__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define MT8135_PIN_123_DPIG4__FUNC_DPI0_G4 (MTK_PIN_NO(123) | 1) +#define MT8135_PIN_123_DPIG4__FUNC_EINT114 (MTK_PIN_NO(123) | 2) +#define MT8135_PIN_123_DPIG4__FUNC_CM2DAT_2X_0 (MTK_PIN_NO(123) | 4) +#define MT8135_PIN_123_DPIG4__FUNC_DSP2_ID (MTK_PIN_NO(123) | 5) + +#define MT8135_PIN_124_DPIG5__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define MT8135_PIN_124_DPIG5__FUNC_DPI0_G5 (MTK_PIN_NO(124) | 1) +#define MT8135_PIN_124_DPIG5__FUNC_EINT115 (MTK_PIN_NO(124) | 2) +#define MT8135_PIN_124_DPIG5__FUNC_CM2DAT_2X_1 (MTK_PIN_NO(124) | 4) +#define MT8135_PIN_124_DPIG5__FUNC_DSP2_ICK (MTK_PIN_NO(124) | 5) + +#define MT8135_PIN_125_DPIR3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define MT8135_PIN_125_DPIR3__FUNC_DPI0_R3 (MTK_PIN_NO(125) | 1) +#define MT8135_PIN_125_DPIR3__FUNC_EINT121 (MTK_PIN_NO(125) | 2) +#define MT8135_PIN_125_DPIR3__FUNC_CM2DAT_2X_7 (MTK_PIN_NO(125) | 4) + +#define MT8135_PIN_126_DPIG1__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define MT8135_PIN_126_DPIG1__FUNC_DPI0_G1 (MTK_PIN_NO(126) | 1) +#define MT8135_PIN_126_DPIG1__FUNC_EINT111 (MTK_PIN_NO(126) | 2) +#define MT8135_PIN_126_DPIG1__FUNC_DSP1_ICK (MTK_PIN_NO(126) | 5) + +#define MT8135_PIN_127_DPIVSYNC__FUNC_GPIO127 (MTK_PIN_NO(127) | 0) +#define MT8135_PIN_127_DPIVSYNC__FUNC_DPI0_VSYNC (MTK_PIN_NO(127) | 1) +#define MT8135_PIN_127_DPIVSYNC__FUNC_EINT98 (MTK_PIN_NO(127) | 2) +#define MT8135_PIN_127_DPIVSYNC__FUNC_I2SIN_CK (MTK_PIN_NO(127) | 3) +#define MT8135_PIN_127_DPIVSYNC__FUNC_DAC_CK (MTK_PIN_NO(127) | 4) +#define MT8135_PIN_127_DPIVSYNC__FUNC_PCM1_CK (MTK_PIN_NO(127) | 5) + +#define MT8135_PIN_128_DPIHSYNC__FUNC_GPIO128 (MTK_PIN_NO(128) | 0) +#define MT8135_PIN_128_DPIHSYNC__FUNC_DPI0_HSYNC (MTK_PIN_NO(128) | 1) +#define MT8135_PIN_128_DPIHSYNC__FUNC_EINT99 (MTK_PIN_NO(128) | 2) +#define MT8135_PIN_128_DPIHSYNC__FUNC_I2SIN_WS (MTK_PIN_NO(128) | 3) +#define MT8135_PIN_128_DPIHSYNC__FUNC_DAC_WS (MTK_PIN_NO(128) | 4) +#define MT8135_PIN_128_DPIHSYNC__FUNC_PCM1_WS (MTK_PIN_NO(128) | 5) +#define MT8135_PIN_128_DPIHSYNC__FUNC_IRDA_RXD (MTK_PIN_NO(128) | 6) + +#define MT8135_PIN_129_DPIB0__FUNC_GPIO129 (MTK_PIN_NO(129) | 0) +#define MT8135_PIN_129_DPIB0__FUNC_DPI0_B0 (MTK_PIN_NO(129) | 1) +#define MT8135_PIN_129_DPIB0__FUNC_EINT102 (MTK_PIN_NO(129) | 2) +#define MT8135_PIN_129_DPIB0__FUNC_SCL0 (MTK_PIN_NO(129) | 4) +#define MT8135_PIN_129_DPIB0__FUNC_DISP_PWM (MTK_PIN_NO(129) | 5) + +#define MT8135_PIN_130_DPIB1__FUNC_GPIO130 (MTK_PIN_NO(130) | 0) +#define MT8135_PIN_130_DPIB1__FUNC_DPI0_B1 (MTK_PIN_NO(130) | 1) +#define MT8135_PIN_130_DPIB1__FUNC_EINT103 (MTK_PIN_NO(130) | 2) +#define MT8135_PIN_130_DPIB1__FUNC_CLKM0 (MTK_PIN_NO(130) | 3) +#define MT8135_PIN_130_DPIB1__FUNC_SDA0 (MTK_PIN_NO(130) | 4) +#define MT8135_PIN_130_DPIB1__FUNC_PWM1 (MTK_PIN_NO(130) | 5) + +#define MT8135_PIN_131_DPIB2__FUNC_GPIO131 (MTK_PIN_NO(131) | 0) +#define MT8135_PIN_131_DPIB2__FUNC_DPI0_B2 (MTK_PIN_NO(131) | 1) +#define MT8135_PIN_131_DPIB2__FUNC_EINT104 (MTK_PIN_NO(131) | 2) +#define MT8135_PIN_131_DPIB2__FUNC_CLKM1 (MTK_PIN_NO(131) | 3) +#define MT8135_PIN_131_DPIB2__FUNC_SCL1 (MTK_PIN_NO(131) | 4) +#define MT8135_PIN_131_DPIB2__FUNC_PWM2 (MTK_PIN_NO(131) | 5) + +#define MT8135_PIN_132_DPIB3__FUNC_GPIO132 (MTK_PIN_NO(132) | 0) +#define MT8135_PIN_132_DPIB3__FUNC_DPI0_B3 (MTK_PIN_NO(132) | 1) +#define MT8135_PIN_132_DPIB3__FUNC_EINT105 (MTK_PIN_NO(132) | 2) +#define MT8135_PIN_132_DPIB3__FUNC_CLKM2 (MTK_PIN_NO(132) | 3) +#define MT8135_PIN_132_DPIB3__FUNC_SDA1 (MTK_PIN_NO(132) | 4) +#define MT8135_PIN_132_DPIB3__FUNC_PWM3 (MTK_PIN_NO(132) | 5) + +#define MT8135_PIN_133_DPIB4__FUNC_GPIO133 (MTK_PIN_NO(133) | 0) +#define MT8135_PIN_133_DPIB4__FUNC_DPI0_B4 (MTK_PIN_NO(133) | 1) +#define MT8135_PIN_133_DPIB4__FUNC_EINT106 (MTK_PIN_NO(133) | 2) +#define MT8135_PIN_133_DPIB4__FUNC_CLKM3 (MTK_PIN_NO(133) | 3) +#define MT8135_PIN_133_DPIB4__FUNC_SCL2 (MTK_PIN_NO(133) | 4) +#define MT8135_PIN_133_DPIB4__FUNC_PWM4 (MTK_PIN_NO(133) | 5) + +#define MT8135_PIN_134_DPIB5__FUNC_GPIO134 (MTK_PIN_NO(134) | 0) +#define MT8135_PIN_134_DPIB5__FUNC_DPI0_B5 (MTK_PIN_NO(134) | 1) +#define MT8135_PIN_134_DPIB5__FUNC_EINT107 (MTK_PIN_NO(134) | 2) +#define MT8135_PIN_134_DPIB5__FUNC_CLKM4 (MTK_PIN_NO(134) | 3) +#define MT8135_PIN_134_DPIB5__FUNC_SDA2 (MTK_PIN_NO(134) | 4) +#define MT8135_PIN_134_DPIB5__FUNC_PWM5 (MTK_PIN_NO(134) | 5) + +#define MT8135_PIN_135_DPIB6__FUNC_GPIO135 (MTK_PIN_NO(135) | 0) +#define MT8135_PIN_135_DPIB6__FUNC_DPI0_B6 (MTK_PIN_NO(135) | 1) +#define MT8135_PIN_135_DPIB6__FUNC_EINT108 (MTK_PIN_NO(135) | 2) +#define MT8135_PIN_135_DPIB6__FUNC_CLKM5 (MTK_PIN_NO(135) | 3) +#define MT8135_PIN_135_DPIB6__FUNC_SCL3 (MTK_PIN_NO(135) | 4) +#define MT8135_PIN_135_DPIB6__FUNC_PWM6 (MTK_PIN_NO(135) | 5) + +#define MT8135_PIN_136_DPIB7__FUNC_GPIO136 (MTK_PIN_NO(136) | 0) +#define MT8135_PIN_136_DPIB7__FUNC_DPI0_B7 (MTK_PIN_NO(136) | 1) +#define MT8135_PIN_136_DPIB7__FUNC_EINT109 (MTK_PIN_NO(136) | 2) +#define MT8135_PIN_136_DPIB7__FUNC_CLKM6 (MTK_PIN_NO(136) | 3) +#define MT8135_PIN_136_DPIB7__FUNC_SDA3 (MTK_PIN_NO(136) | 4) +#define MT8135_PIN_136_DPIB7__FUNC_PWM7 (MTK_PIN_NO(136) | 5) + +#define MT8135_PIN_137_DPIG0__FUNC_GPIO137 (MTK_PIN_NO(137) | 0) +#define MT8135_PIN_137_DPIG0__FUNC_DPI0_G0 (MTK_PIN_NO(137) | 1) +#define MT8135_PIN_137_DPIG0__FUNC_EINT110 (MTK_PIN_NO(137) | 2) +#define MT8135_PIN_137_DPIG0__FUNC_DSP1_ID (MTK_PIN_NO(137) | 5) + +#define MT8135_PIN_138_DPIG2__FUNC_GPIO138 (MTK_PIN_NO(138) | 0) +#define MT8135_PIN_138_DPIG2__FUNC_DPI0_G2 (MTK_PIN_NO(138) | 1) +#define MT8135_PIN_138_DPIG2__FUNC_EINT112 (MTK_PIN_NO(138) | 2) +#define MT8135_PIN_138_DPIG2__FUNC_DSP1_IMS (MTK_PIN_NO(138) | 5) + +#define MT8135_PIN_139_DPIG3__FUNC_GPIO139 (MTK_PIN_NO(139) | 0) +#define MT8135_PIN_139_DPIG3__FUNC_DPI0_G3 (MTK_PIN_NO(139) | 1) +#define MT8135_PIN_139_DPIG3__FUNC_EINT113 (MTK_PIN_NO(139) | 2) +#define MT8135_PIN_139_DPIG3__FUNC_DSP2_IMS (MTK_PIN_NO(139) | 5) + +#define MT8135_PIN_140_DPIG6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0) +#define MT8135_PIN_140_DPIG6__FUNC_DPI0_G6 (MTK_PIN_NO(140) | 1) +#define MT8135_PIN_140_DPIG6__FUNC_EINT116 (MTK_PIN_NO(140) | 2) +#define MT8135_PIN_140_DPIG6__FUNC_CM2DAT_2X_2 (MTK_PIN_NO(140) | 4) + +#define MT8135_PIN_141_DPIG7__FUNC_GPIO141 (MTK_PIN_NO(141) | 0) +#define MT8135_PIN_141_DPIG7__FUNC_DPI0_G7 (MTK_PIN_NO(141) | 1) +#define MT8135_PIN_141_DPIG7__FUNC_EINT117 (MTK_PIN_NO(141) | 2) +#define MT8135_PIN_141_DPIG7__FUNC_CM2DAT_2X_3 (MTK_PIN_NO(141) | 4) + +#define MT8135_PIN_142_DPIR0__FUNC_GPIO142 (MTK_PIN_NO(142) | 0) +#define MT8135_PIN_142_DPIR0__FUNC_DPI0_R0 (MTK_PIN_NO(142) | 1) +#define MT8135_PIN_142_DPIR0__FUNC_EINT118 (MTK_PIN_NO(142) | 2) +#define MT8135_PIN_142_DPIR0__FUNC_CM2DAT_2X_4 (MTK_PIN_NO(142) | 4) + +#define MT8135_PIN_143_DPIR1__FUNC_GPIO143 (MTK_PIN_NO(143) | 0) +#define MT8135_PIN_143_DPIR1__FUNC_DPI0_R1 (MTK_PIN_NO(143) | 1) +#define MT8135_PIN_143_DPIR1__FUNC_EINT119 (MTK_PIN_NO(143) | 2) +#define MT8135_PIN_143_DPIR1__FUNC_CM2DAT_2X_5 (MTK_PIN_NO(143) | 4) + +#define MT8135_PIN_144_DPIR2__FUNC_GPIO144 (MTK_PIN_NO(144) | 0) +#define MT8135_PIN_144_DPIR2__FUNC_DPI0_R2 (MTK_PIN_NO(144) | 1) +#define MT8135_PIN_144_DPIR2__FUNC_EINT120 (MTK_PIN_NO(144) | 2) +#define MT8135_PIN_144_DPIR2__FUNC_CM2DAT_2X_6 (MTK_PIN_NO(144) | 4) + +#define MT8135_PIN_145_DPIR4__FUNC_GPIO145 (MTK_PIN_NO(145) | 0) +#define MT8135_PIN_145_DPIR4__FUNC_DPI0_R4 (MTK_PIN_NO(145) | 1) +#define MT8135_PIN_145_DPIR4__FUNC_EINT122 (MTK_PIN_NO(145) | 2) +#define MT8135_PIN_145_DPIR4__FUNC_CM2DAT_2X_8 (MTK_PIN_NO(145) | 4) + +#define MT8135_PIN_146_DPIR5__FUNC_GPIO146 (MTK_PIN_NO(146) | 0) +#define MT8135_PIN_146_DPIR5__FUNC_DPI0_R5 (MTK_PIN_NO(146) | 1) +#define MT8135_PIN_146_DPIR5__FUNC_EINT123 (MTK_PIN_NO(146) | 2) +#define MT8135_PIN_146_DPIR5__FUNC_CM2DAT_2X_9 (MTK_PIN_NO(146) | 4) + +#define MT8135_PIN_147_DPIR6__FUNC_GPIO147 (MTK_PIN_NO(147) | 0) +#define MT8135_PIN_147_DPIR6__FUNC_DPI0_R6 (MTK_PIN_NO(147) | 1) +#define MT8135_PIN_147_DPIR6__FUNC_EINT124 (MTK_PIN_NO(147) | 2) +#define MT8135_PIN_147_DPIR6__FUNC_CM2VSYNC_2X (MTK_PIN_NO(147) | 4) + +#define MT8135_PIN_148_DPIR7__FUNC_GPIO148 (MTK_PIN_NO(148) | 0) +#define MT8135_PIN_148_DPIR7__FUNC_DPI0_R7 (MTK_PIN_NO(148) | 1) +#define MT8135_PIN_148_DPIR7__FUNC_EINT125 (MTK_PIN_NO(148) | 2) +#define MT8135_PIN_148_DPIR7__FUNC_CM2HSYNC_2X (MTK_PIN_NO(148) | 4) + +#define MT8135_PIN_149_TDN3__FUNC_GPIO149 (MTK_PIN_NO(149) | 0) +#define MT8135_PIN_149_TDN3__FUNC_EINT36 (MTK_PIN_NO(149) | 2) + +#define MT8135_PIN_150_TDP3__FUNC_GPIO150 (MTK_PIN_NO(150) | 0) +#define MT8135_PIN_150_TDP3__FUNC_EINT35 (MTK_PIN_NO(150) | 2) + +#define MT8135_PIN_151_TDN2__FUNC_GPIO151 (MTK_PIN_NO(151) | 0) +#define MT8135_PIN_151_TDN2__FUNC_EINT169 (MTK_PIN_NO(151) | 2) + +#define MT8135_PIN_152_TDP2__FUNC_GPIO152 (MTK_PIN_NO(152) | 0) +#define MT8135_PIN_152_TDP2__FUNC_EINT168 (MTK_PIN_NO(152) | 2) + +#define MT8135_PIN_153_TCN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0) +#define MT8135_PIN_153_TCN__FUNC_EINT163 (MTK_PIN_NO(153) | 2) + +#define MT8135_PIN_154_TCP__FUNC_GPIO154 (MTK_PIN_NO(154) | 0) +#define MT8135_PIN_154_TCP__FUNC_EINT162 (MTK_PIN_NO(154) | 2) + +#define MT8135_PIN_155_TDN1__FUNC_GPIO155 (MTK_PIN_NO(155) | 0) +#define MT8135_PIN_155_TDN1__FUNC_EINT167 (MTK_PIN_NO(155) | 2) + +#define MT8135_PIN_156_TDP1__FUNC_GPIO156 (MTK_PIN_NO(156) | 0) +#define MT8135_PIN_156_TDP1__FUNC_EINT166 (MTK_PIN_NO(156) | 2) + +#define MT8135_PIN_157_TDN0__FUNC_GPIO157 (MTK_PIN_NO(157) | 0) +#define MT8135_PIN_157_TDN0__FUNC_EINT165 (MTK_PIN_NO(157) | 2) + +#define MT8135_PIN_158_TDP0__FUNC_GPIO158 (MTK_PIN_NO(158) | 0) +#define MT8135_PIN_158_TDP0__FUNC_EINT164 (MTK_PIN_NO(158) | 2) + +#define MT8135_PIN_159_RDN3__FUNC_GPIO159 (MTK_PIN_NO(159) | 0) +#define MT8135_PIN_159_RDN3__FUNC_EINT18 (MTK_PIN_NO(159) | 2) + +#define MT8135_PIN_160_RDP3__FUNC_GPIO160 (MTK_PIN_NO(160) | 0) +#define MT8135_PIN_160_RDP3__FUNC_EINT30 (MTK_PIN_NO(160) | 2) + +#define MT8135_PIN_161_RDN2__FUNC_GPIO161 (MTK_PIN_NO(161) | 0) +#define MT8135_PIN_161_RDN2__FUNC_EINT31 (MTK_PIN_NO(161) | 2) + +#define MT8135_PIN_162_RDP2__FUNC_GPIO162 (MTK_PIN_NO(162) | 0) +#define MT8135_PIN_162_RDP2__FUNC_EINT32 (MTK_PIN_NO(162) | 2) + +#define MT8135_PIN_163_RCN__FUNC_GPIO163 (MTK_PIN_NO(163) | 0) +#define MT8135_PIN_163_RCN__FUNC_EINT33 (MTK_PIN_NO(163) | 2) + +#define MT8135_PIN_164_RCP__FUNC_GPIO164 (MTK_PIN_NO(164) | 0) +#define MT8135_PIN_164_RCP__FUNC_EINT39 (MTK_PIN_NO(164) | 2) + +#define MT8135_PIN_165_RDN1__FUNC_GPIO165 (MTK_PIN_NO(165) | 0) + +#define MT8135_PIN_166_RDP1__FUNC_GPIO166 (MTK_PIN_NO(166) | 0) + +#define MT8135_PIN_167_RDN0__FUNC_GPIO167 (MTK_PIN_NO(167) | 0) + +#define MT8135_PIN_168_RDP0__FUNC_GPIO168 (MTK_PIN_NO(168) | 0) + +#define MT8135_PIN_169_RDN1_A__FUNC_GPIO169 (MTK_PIN_NO(169) | 0) +#define MT8135_PIN_169_RDN1_A__FUNC_CMDAT6 (MTK_PIN_NO(169) | 1) +#define MT8135_PIN_169_RDN1_A__FUNC_EINT175 (MTK_PIN_NO(169) | 2) + +#define MT8135_PIN_170_RDP1_A__FUNC_GPIO170 (MTK_PIN_NO(170) | 0) +#define MT8135_PIN_170_RDP1_A__FUNC_CMDAT7 (MTK_PIN_NO(170) | 1) +#define MT8135_PIN_170_RDP1_A__FUNC_EINT174 (MTK_PIN_NO(170) | 2) + +#define MT8135_PIN_171_RCN_A__FUNC_GPIO171 (MTK_PIN_NO(171) | 0) +#define MT8135_PIN_171_RCN_A__FUNC_CMDAT8 (MTK_PIN_NO(171) | 1) +#define MT8135_PIN_171_RCN_A__FUNC_EINT171 (MTK_PIN_NO(171) | 2) + +#define MT8135_PIN_172_RCP_A__FUNC_GPIO172 (MTK_PIN_NO(172) | 0) +#define MT8135_PIN_172_RCP_A__FUNC_CMDAT9 (MTK_PIN_NO(172) | 1) +#define MT8135_PIN_172_RCP_A__FUNC_EINT170 (MTK_PIN_NO(172) | 2) + +#define MT8135_PIN_173_RDN0_A__FUNC_GPIO173 (MTK_PIN_NO(173) | 0) +#define MT8135_PIN_173_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(173) | 1) +#define MT8135_PIN_173_RDN0_A__FUNC_EINT173 (MTK_PIN_NO(173) | 2) + +#define MT8135_PIN_174_RDP0_A__FUNC_GPIO174 (MTK_PIN_NO(174) | 0) +#define MT8135_PIN_174_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(174) | 1) +#define MT8135_PIN_174_RDP0_A__FUNC_EINT172 (MTK_PIN_NO(174) | 2) + +#define MT8135_PIN_175_RDN1_B__FUNC_GPIO175 (MTK_PIN_NO(175) | 0) +#define MT8135_PIN_175_RDN1_B__FUNC_CMDAT2 (MTK_PIN_NO(175) | 1) +#define MT8135_PIN_175_RDN1_B__FUNC_EINT181 (MTK_PIN_NO(175) | 2) +#define MT8135_PIN_175_RDN1_B__FUNC_CMCSD2 (MTK_PIN_NO(175) | 3) + +#define MT8135_PIN_176_RDP1_B__FUNC_GPIO176 (MTK_PIN_NO(176) | 0) +#define MT8135_PIN_176_RDP1_B__FUNC_CMDAT3 (MTK_PIN_NO(176) | 1) +#define MT8135_PIN_176_RDP1_B__FUNC_EINT180 (MTK_PIN_NO(176) | 2) +#define MT8135_PIN_176_RDP1_B__FUNC_CMCSD3 (MTK_PIN_NO(176) | 3) + +#define MT8135_PIN_177_RCN_B__FUNC_GPIO177 (MTK_PIN_NO(177) | 0) +#define MT8135_PIN_177_RCN_B__FUNC_CMDAT4 (MTK_PIN_NO(177) | 1) +#define MT8135_PIN_177_RCN_B__FUNC_EINT177 (MTK_PIN_NO(177) | 2) + +#define MT8135_PIN_178_RCP_B__FUNC_GPIO178 (MTK_PIN_NO(178) | 0) +#define MT8135_PIN_178_RCP_B__FUNC_CMDAT5 (MTK_PIN_NO(178) | 1) +#define MT8135_PIN_178_RCP_B__FUNC_EINT176 (MTK_PIN_NO(178) | 2) + +#define MT8135_PIN_179_RDN0_B__FUNC_GPIO179 (MTK_PIN_NO(179) | 0) +#define MT8135_PIN_179_RDN0_B__FUNC_CMDAT0 (MTK_PIN_NO(179) | 1) +#define MT8135_PIN_179_RDN0_B__FUNC_EINT179 (MTK_PIN_NO(179) | 2) +#define MT8135_PIN_179_RDN0_B__FUNC_CMCSD0 (MTK_PIN_NO(179) | 3) + +#define MT8135_PIN_180_RDP0_B__FUNC_GPIO180 (MTK_PIN_NO(180) | 0) +#define MT8135_PIN_180_RDP0_B__FUNC_CMDAT1 (MTK_PIN_NO(180) | 1) +#define MT8135_PIN_180_RDP0_B__FUNC_EINT178 (MTK_PIN_NO(180) | 2) +#define MT8135_PIN_180_RDP0_B__FUNC_CMCSD1 (MTK_PIN_NO(180) | 3) + +#define MT8135_PIN_181_CMPCLK__FUNC_GPIO181 (MTK_PIN_NO(181) | 0) +#define MT8135_PIN_181_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(181) | 1) +#define MT8135_PIN_181_CMPCLK__FUNC_EINT182 (MTK_PIN_NO(181) | 2) +#define MT8135_PIN_181_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(181) | 3) +#define MT8135_PIN_181_CMPCLK__FUNC_CM2MCLK_4X (MTK_PIN_NO(181) | 4) +#define MT8135_PIN_181_CMPCLK__FUNC_TS_AUXADC_SEL_3 (MTK_PIN_NO(181) | 5) +#define MT8135_PIN_181_CMPCLK__FUNC_VENC_TEST_CK (MTK_PIN_NO(181) | 6) +#define MT8135_PIN_181_CMPCLK__FUNC_TESTA_OUT27 (MTK_PIN_NO(181) | 7) + +#define MT8135_PIN_182_CMMCLK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0) +#define MT8135_PIN_182_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(182) | 1) +#define MT8135_PIN_182_CMMCLK__FUNC_EINT183 (MTK_PIN_NO(182) | 2) +#define MT8135_PIN_182_CMMCLK__FUNC_TS_AUXADC_SEL_2 (MTK_PIN_NO(182) | 5) +#define MT8135_PIN_182_CMMCLK__FUNC_TESTA_OUT28 (MTK_PIN_NO(182) | 7) + +#define MT8135_PIN_183_CMRST__FUNC_GPIO183 (MTK_PIN_NO(183) | 0) +#define MT8135_PIN_183_CMRST__FUNC_CMRST (MTK_PIN_NO(183) | 1) +#define MT8135_PIN_183_CMRST__FUNC_EINT185 (MTK_PIN_NO(183) | 2) +#define MT8135_PIN_183_CMRST__FUNC_TS_AUXADC_SEL_1 (MTK_PIN_NO(183) | 5) +#define MT8135_PIN_183_CMRST__FUNC_TESTA_OUT30 (MTK_PIN_NO(183) | 7) + +#define MT8135_PIN_184_CMPDN__FUNC_GPIO184 (MTK_PIN_NO(184) | 0) +#define MT8135_PIN_184_CMPDN__FUNC_CMPDN (MTK_PIN_NO(184) | 1) +#define MT8135_PIN_184_CMPDN__FUNC_EINT184 (MTK_PIN_NO(184) | 2) +#define MT8135_PIN_184_CMPDN__FUNC_TS_AUXADC_SEL_0 (MTK_PIN_NO(184) | 5) +#define MT8135_PIN_184_CMPDN__FUNC_TESTA_OUT29 (MTK_PIN_NO(184) | 7) + +#define MT8135_PIN_185_CMFLASH__FUNC_GPIO185 (MTK_PIN_NO(185) | 0) +#define MT8135_PIN_185_CMFLASH__FUNC_CMFLASH (MTK_PIN_NO(185) | 1) +#define MT8135_PIN_185_CMFLASH__FUNC_EINT186 (MTK_PIN_NO(185) | 2) +#define MT8135_PIN_185_CMFLASH__FUNC_CM2MCLK_3X (MTK_PIN_NO(185) | 3) +#define MT8135_PIN_185_CMFLASH__FUNC_MFG_TEST_CK_1 (MTK_PIN_NO(185) | 6) +#define MT8135_PIN_185_CMFLASH__FUNC_TESTA_OUT31 (MTK_PIN_NO(185) | 7) + +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_GPIO186 (MTK_PIN_NO(186) | 0) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_MRG_I2S_P_CLK (MTK_PIN_NO(186) | 1) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_EINT14 (MTK_PIN_NO(186) | 2) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(186) | 3) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_PCM0_CK (MTK_PIN_NO(186) | 4) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_DSP2_ICK (MTK_PIN_NO(186) | 5) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_IMG_TEST_CK (MTK_PIN_NO(186) | 6) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_USB_SCL (MTK_PIN_NO(186) | 7) + +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_GPIO187 (MTK_PIN_NO(187) | 0) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_MRG_I2S_SYNC (MTK_PIN_NO(187) | 1) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_EINT16 (MTK_PIN_NO(187) | 2) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_I2SIN_WS (MTK_PIN_NO(187) | 3) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_PCM0_WS (MTK_PIN_NO(187) | 4) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_DISP_TEST_CK (MTK_PIN_NO(187) | 6) + +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_GPIO188 (MTK_PIN_NO(188) | 0) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MRG_I2S_PCM_RX (MTK_PIN_NO(188) | 1) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_EINT15 (MTK_PIN_NO(188) | 2) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_I2SIN_DAT (MTK_PIN_NO(188) | 3) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_PCM0_DI (MTK_PIN_NO(188) | 4) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_DSP2_ID (MTK_PIN_NO(188) | 5) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MFG_TEST_CK (MTK_PIN_NO(188) | 6) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_USB_SDA (MTK_PIN_NO(188) | 7) + +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_GPIO189 (MTK_PIN_NO(189) | 0) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_MRG_I2S_PCM_TX (MTK_PIN_NO(189) | 1) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_EINT17 (MTK_PIN_NO(189) | 2) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_I2SOUT_DAT (MTK_PIN_NO(189) | 3) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_PCM0_DO (MTK_PIN_NO(189) | 4) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_VDEC_TEST_CK (MTK_PIN_NO(189) | 6) + +#define MT8135_PIN_190_SRCLKENAI__FUNC_GPIO190 (MTK_PIN_NO(190) | 0) +#define MT8135_PIN_190_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(190) | 1) + +#define MT8135_PIN_191_URXD3__FUNC_GPIO191 (MTK_PIN_NO(191) | 0) +#define MT8135_PIN_191_URXD3__FUNC_URXD3 (MTK_PIN_NO(191) | 1) +#define MT8135_PIN_191_URXD3__FUNC_EINT87 (MTK_PIN_NO(191) | 2) +#define MT8135_PIN_191_URXD3__FUNC_UTXD3 (MTK_PIN_NO(191) | 3) +#define MT8135_PIN_191_URXD3__FUNC_TS_AUX_ST (MTK_PIN_NO(191) | 5) +#define MT8135_PIN_191_URXD3__FUNC_PWM4 (MTK_PIN_NO(191) | 6) + +#define MT8135_PIN_192_UTXD3__FUNC_GPIO192 (MTK_PIN_NO(192) | 0) +#define MT8135_PIN_192_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(192) | 1) +#define MT8135_PIN_192_UTXD3__FUNC_EINT86 (MTK_PIN_NO(192) | 2) +#define MT8135_PIN_192_UTXD3__FUNC_URXD3 (MTK_PIN_NO(192) | 3) +#define MT8135_PIN_192_UTXD3__FUNC_TS_AUX_CS_B (MTK_PIN_NO(192) | 5) +#define MT8135_PIN_192_UTXD3__FUNC_PWM3 (MTK_PIN_NO(192) | 6) + +#define MT8135_PIN_193_SDA2__FUNC_GPIO193 (MTK_PIN_NO(193) | 0) +#define MT8135_PIN_193_SDA2__FUNC_SDA2 (MTK_PIN_NO(193) | 1) +#define MT8135_PIN_193_SDA2__FUNC_EINT95 (MTK_PIN_NO(193) | 2) +#define MT8135_PIN_193_SDA2__FUNC_CLKM5 (MTK_PIN_NO(193) | 3) +#define MT8135_PIN_193_SDA2__FUNC_PWM5 (MTK_PIN_NO(193) | 4) +#define MT8135_PIN_193_SDA2__FUNC_TS_AUX_PWDB (MTK_PIN_NO(193) | 5) + +#define MT8135_PIN_194_SCL2__FUNC_GPIO194 (MTK_PIN_NO(194) | 0) +#define MT8135_PIN_194_SCL2__FUNC_SCL2 (MTK_PIN_NO(194) | 1) +#define MT8135_PIN_194_SCL2__FUNC_EINT94 (MTK_PIN_NO(194) | 2) +#define MT8135_PIN_194_SCL2__FUNC_CLKM4 (MTK_PIN_NO(194) | 3) +#define MT8135_PIN_194_SCL2__FUNC_PWM4 (MTK_PIN_NO(194) | 4) +#define MT8135_PIN_194_SCL2__FUNC_TS_AUXADC_TEST_CK (MTK_PIN_NO(194) | 5) + +#define MT8135_PIN_195_SDA1__FUNC_GPIO195 (MTK_PIN_NO(195) | 0) +#define MT8135_PIN_195_SDA1__FUNC_SDA1 (MTK_PIN_NO(195) | 1) +#define MT8135_PIN_195_SDA1__FUNC_EINT93 (MTK_PIN_NO(195) | 2) +#define MT8135_PIN_195_SDA1__FUNC_CLKM3 (MTK_PIN_NO(195) | 3) +#define MT8135_PIN_195_SDA1__FUNC_PWM3 (MTK_PIN_NO(195) | 4) +#define MT8135_PIN_195_SDA1__FUNC_TS_AUX_SCLK_PWDB (MTK_PIN_NO(195) | 5) + +#define MT8135_PIN_196_SCL1__FUNC_GPIO196 (MTK_PIN_NO(196) | 0) +#define MT8135_PIN_196_SCL1__FUNC_SCL1 (MTK_PIN_NO(196) | 1) +#define MT8135_PIN_196_SCL1__FUNC_EINT92 (MTK_PIN_NO(196) | 2) +#define MT8135_PIN_196_SCL1__FUNC_CLKM2 (MTK_PIN_NO(196) | 3) +#define MT8135_PIN_196_SCL1__FUNC_PWM2 (MTK_PIN_NO(196) | 4) +#define MT8135_PIN_196_SCL1__FUNC_TS_AUX_DIN (MTK_PIN_NO(196) | 5) + +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_GPIO197 (MTK_PIN_NO(197) | 0) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(197) | 1) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_EINT71 (MTK_PIN_NO(197) | 2) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_SCL6 (MTK_PIN_NO(197) | 3) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_PWM5 (MTK_PIN_NO(197) | 4) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_CLKM4 (MTK_PIN_NO(197) | 5) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MFG_TEST_CK_2 (MTK_PIN_NO(197) | 6) + +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_GPIO198 (MTK_PIN_NO(198) | 0) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(198) | 1) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_EINT72 (MTK_PIN_NO(198) | 2) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_SDA6 (MTK_PIN_NO(198) | 3) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_PWM6 (MTK_PIN_NO(198) | 4) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_CLKM5 (MTK_PIN_NO(198) | 5) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MFG_TEST_CK_3 (MTK_PIN_NO(198) | 6) + +#define MT8135_PIN_199_MSDC3_CMD__FUNC_GPIO199 (MTK_PIN_NO(199) | 0) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(199) | 1) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_EINT68 (MTK_PIN_NO(199) | 2) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_SDA2 (MTK_PIN_NO(199) | 3) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_PWM2 (MTK_PIN_NO(199) | 4) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_CLKM1 (MTK_PIN_NO(199) | 5) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_MFG_TEST_CK_4 (MTK_PIN_NO(199) | 6) + +#define MT8135_PIN_200_MSDC3_CLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(200) | 1) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_EINT67 (MTK_PIN_NO(200) | 2) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_SCL2 (MTK_PIN_NO(200) | 3) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_PWM1 (MTK_PIN_NO(200) | 4) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_CLKM0 (MTK_PIN_NO(200) | 5) + +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_GPIO201 (MTK_PIN_NO(201) | 0) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(201) | 1) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_EINT70 (MTK_PIN_NO(201) | 2) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_SDA3 (MTK_PIN_NO(201) | 3) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_PWM4 (MTK_PIN_NO(201) | 4) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_CLKM3 (MTK_PIN_NO(201) | 5) + +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_GPIO202 (MTK_PIN_NO(202) | 0) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(202) | 1) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_EINT69 (MTK_PIN_NO(202) | 2) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_SCL3 (MTK_PIN_NO(202) | 3) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_PWM3 (MTK_PIN_NO(202) | 4) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_CLKM2 (MTK_PIN_NO(202) | 5) + +#endif /* __DTS_MT8135_PINFUNC_H */ diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index a161e99ffcc4..0aba9eb28e2b 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton64.dtsi" +#include "mt8135-pinfunc.h" / { compatible = "mediatek,mt8135"; @@ -101,6 +102,29 @@ compatible = "simple-bus"; ranges; + /* + * Pinctrl access register at 0x10005000 and 0x1020c000 through + * regmap. Register 0x1000b000 is used by EINT. + */ + pio: pinctrl@10005000 { + compatible = "mediatek,mt8135-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + }; + + syscfg_pctl_a: syscfg_pctl_a@10005000 { + compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + timer: timer@10008000 { compatible = "mediatek,mt8135-timer", "mediatek,mt6577-timer"; @@ -119,6 +143,11 @@ reg = <0 0x10200030 0 0x1c>; }; + syscfg_pctl_b: syscfg_pctl_b@1020c000 { + compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon"; + reg = <0 0x1020c000 0 0x1000>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 921de6605f07..be2297116a14 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -157,3 +157,44 @@ }; }; }; + +&gpmc { + ranges = <6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */ + + ethernet@0,0 { + compatible = "davicom,dm9000"; + reg = <6 0x000 2 + 6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ + bank-width = <2>; + interrupt-parent = <&gpio1>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + davicom,no-eeprom; + + gpmc,mux-add-data = <0>; + gpmc,device-width = <1>; + gpmc,wait-pin = <0>; + gpmc,cycle2cycle-samecsen = <1>; + gpmc,cycle2cycle-diffcsen = <1>; + + gpmc,cs-on-ns = <6>; + gpmc,cs-rd-off-ns = <180>; + gpmc,cs-wr-off-ns = <180>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <18>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <144>; + gpmc,page-burst-access-ns = <24>; + gpmc,bus-turnaround-ns = <90>; + gpmc,cycle2cycle-delay-ns = <90>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,wr-access-ns = <0>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 346552b94d9f..b2589f96d5f7 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -96,6 +96,7 @@ }; &mmc1 { + interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; bus-width = <8>; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index b9f68817bd6e..7166d8876ea8 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -48,6 +48,28 @@ ti,mcbsp = <&mcbsp2>; }; + /* GSM audio */ + sound_telephony { + compatible = "simple-audio-card"; + simple-audio-card,name = "GTA04 voice"; + simple-audio-card,bitclock-master = <&telephony_link_master>; + simple-audio-card,frame-master = <&telephony_link_master>; + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&mcbsp4>; + }; + + telephony_link_master: simple-audio-card,codec { + sound-dai = <>m601_codec>; + }; + }; + + gtm601_codec: gsm_codec { + compatible = "option,gtm601"; + #sound-dai-cells = <0>; + }; + spi_lcd { compatible = "spi-gpio"; #address-cells = <0x1>; @@ -200,6 +222,12 @@ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ >; }; + + hdq_pins: hdq_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ + >; + }; }; &omap3_pmx_core2 { @@ -517,3 +545,12 @@ &mcbsp2 { status = "okay"; }; + +&hdqw1w { + pinctrl-names = "default"; + pinctrl-0 = <&hdq_pins>; +}; + +&mcbsp4 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index b699bc48f242..bd6e6769c7ce 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -34,63 +34,63 @@ key_enter { label = "enter"; gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */ - linux,code = <0x0107001c>; /* KEY_ENTER */ + linux,code = <KEY_ENTER>; gpio-key,wakeup; }; key_f1 { label = "f1"; gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */ - linux,code = <0x0303003b>; /* KEY_F1 */ + linux,code = <KEY_F1>; gpio-key,wakeup; }; key_f2 { label = "f2"; gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */ - linux,code = <0x0403003c>; /* KEY_F2 */ + linux,code = <KEY_F2>; gpio-key,wakeup; }; key_f3 { label = "f3"; gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */ - linux,code = <0x0503003d>; /* KEY_F3 */ + linux,code = <KEY_F3>; gpio-key,wakeup; }; key_f4 { label = "f4"; gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */ - linux,code = <0x0704003e>; /* KEY_F4 */ + linux,code = <KEY_F4>; gpio-key,wakeup; }; key_left { label = "left"; gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */ - linux,code = <0x04070069>; /* KEY_LEFT */ + linux,code = <KEY_LEFT>; gpio-key,wakeup; }; key_right { label = "right"; gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */ - linux,code = <0x0507006a>; /* KEY_RIGHT */ + linux,code = <KEY_RIGHT>; gpio-key,wakeup; }; key_up { label = "up"; gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */ - linux,code = <0x06070067>; /* KEY_UP */ + linux,code = <KEY_UP>; gpio-key,wakeup; }; key_down { label = "down"; gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */ - linux,code = <0x0707006c>; /* KEY_DOWN */ + linux,code = <KEY_DOWN>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 74777a6e200a..275618f19a43 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -597,18 +597,20 @@ }; &uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; }; &uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <&omap5_pmx_core 0x19c>; }; &uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; }; &cpu0 { diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 80fc5d7e9ef9..90b99714ad80 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -1,6 +1,6 @@ /* The pxa3xx skeleton simply augments the 2xx version */ #include "pxa2xx.dtsi" -#include "dt-bindings/clock/pxa2xx-clock.h" +#include "dt-bindings/clock/pxa-clock.h" / { model = "Marvell PXA27x familiy SoC"; @@ -12,28 +12,61 @@ marvell,intc-nr-irqs = <34>; }; + gpio: gpio@40e00000 { + compatible = "intel,pxa27x-gpio"; + clocks = <&clks CLK_NONE>; + }; + pwm0: pwm@40b00000 { compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; reg = <0x40b00000 0x10>; #pwm-cells = <1>; + clocks = <&clks CLK_PWM0>; }; pwm1: pwm@40b00010 { compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; reg = <0x40b00010 0x10>; #pwm-cells = <1>; + clocks = <&clks CLK_PWM1>; }; pwm2: pwm@40c00000 { compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; reg = <0x40c00000 0x10>; #pwm-cells = <1>; + clocks = <&clks CLK_PWM0>; }; pwm3: pwm@40c00010 { compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; reg = <0x40c00010 0x10>; #pwm-cells = <1>; + clocks = <&clks CLK_PWM1>; + }; + + pwri2c: i2c@40f000180 { + compatible = "mrvl,pxa-i2c"; + reg = <0x40f00180 0x24>; + interrupts = <6>; + clocks = <&clks CLK_PWRI2C>; + status = "disabled"; + }; + + pxa27x_udc: udc@40600000 { + compatible = "marvell,pxa270-udc"; + reg = <0x40600000 0x10000>; + interrupts = <11>; + clocks = <&clks CLK_USB>; + status = "disabled"; + }; + + keypad: keypad@41500000 { + compatible = "marvell,pxa27x-keypad"; + reg = <0x41500000 0x4c>; + interrupts = <4>; + clocks = <&clks CLK_KEYPAD>; + status = "disabled"; }; }; @@ -46,11 +79,18 @@ #size-cells = <1>; ranges; - pxa2xx_clks: pxa2xx_clks@41300004 { - compatible = "marvell,pxa-clocks"; + clks: pxa2xx_clks@41300004 { + compatible = "marvell,pxa270-clocks"; #clock-cells = <1>; status = "okay"; }; }; + timer@40a00000 { + compatible = "marvell,pxa-timer"; + reg = <0x40a00000 0x20>; + interrupts = <26>; + clocks = <&clks CLK_OSTIMER>; + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index c08f84629aa9..71a0cd7388d1 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -6,7 +6,8 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include "dt-bindings/clock/pxa-clock.h" / { model = "Marvell PXA2xx family SoC"; @@ -79,6 +80,7 @@ compatible = "mrvl,pxa-uart"; reg = <0x40100000 0x30>; interrupts = <22>; + clocks = <&clks CLK_FFUART>; status = "disabled"; }; @@ -86,6 +88,7 @@ compatible = "mrvl,pxa-uart"; reg = <0x40200000 0x30>; interrupts = <21>; + clocks = <&clks CLK_BTUART>; status = "disabled"; }; @@ -93,6 +96,7 @@ compatible = "mrvl,pxa-uart"; reg = <0x40700000 0x30>; interrupts = <20>; + clocks = <&clks CLK_STUART>; status = "disabled"; }; @@ -107,6 +111,7 @@ compatible = "mrvl,pxa-i2c"; reg = <0x40301680 0x30>; interrupts = <18>; + clocks = <&clks CLK_I2C>; #address-cells = <0x1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index 83bb0eff697b..7ad0b1771098 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -1,5 +1,5 @@ /* The pxa3xx skeleton simply augments the 2xx version */ -/include/ "pxa2xx.dtsi" +#include "pxa2xx.dtsi" / { model = "Marvell PXA3xx familiy SoC"; @@ -10,6 +10,7 @@ compatible = "mrvl,pwri2c"; reg = <0x40f500c0 0x30>; interrupts = <6>; + clocks = <&clks CLK_PWRI2C>; #address-cells = <0x1>; #size-cells = <0>; status = "disabled"; @@ -19,6 +20,7 @@ compatible = "marvell,pxa3xx-nand"; reg = <0x43100000 90>; interrupts = <45>; + clocks = <&clks CLK_NAND>; #address-cells = <1>; #size-cells = <1>; status = "disabled"; @@ -32,6 +34,7 @@ gpio: gpio@40e00000 { compatible = "intel,pxa3xx-gpio"; reg = <0x40e00000 0x10000>; + clocks = <&clks CLK_GPIO>; interrupt-names = "gpio0", "gpio1", "gpio_mux"; interrupts = <8 9 10>; gpio-controller; @@ -40,4 +43,28 @@ #interrupt-cells = <0x2>; }; }; + + clocks { + /* + * The muxing of external clocks/internal dividers for osc* clock + * sources has been hidden under the carpet by now. + */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clks: pxa3xx_clks@41300004 { + compatible = "marvell,pxa300-clocks"; + #clock-cells = <1>; + status = "okay"; + }; + }; + + timer@40a00000 { + compatible = "marvell,pxa-timer"; + reg = <0x40a00000 0x20>; + interrupts = <26>; + clocks = <&clks CLK_OSTIMER>; + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 5d75666f7f6c..71512b3ca444 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -14,6 +14,67 @@ }; }; + rpm@108000 { + regulators { + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + }; + }; + gsbi@12440000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; @@ -40,6 +101,45 @@ }; }; + /* OTG */ + usb1_phy: phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + usb3_phy: phy@12520000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + usb4_phy: phy@12530000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + gadget1: gadget@12500000 { + status = "ok"; + }; + + /* OTG */ + usb1: usb@12500000 { + status = "ok"; + }; + + usb3: usb@12520000 { + status = "okay"; + }; + + usb4: usb@12530000 { + status = "okay"; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index e641001ca2a7..a7c939ba8873 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -5,15 +5,12 @@ model = "Qualcomm APQ8064/IFC6410"; compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; + aliases { + serial0 = &gsbi7_serial; + }; + soc { pinctrl@800000 { - i2c1_pins: i2c1 { - mux { - pins = "gpio20", "gpio21"; - function = "gsbi1"; - }; - }; - card_detect: card_detect { mux { pins = "gpio26"; @@ -23,6 +20,83 @@ }; }; + rpm@108000 { + regulators { + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + }; + }; + + gsbi3: gsbi@16200000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c3: i2c@16280000 { + status = "okay"; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + }; + }; + gsbi@12440000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; @@ -49,6 +123,54 @@ }; }; + sata_phy0: phy@1b400000 { + status = "okay"; + }; + + sata0: sata@29000000 { + status = "okay"; + target-supply = <&pm8921_s4>; + }; + + /* OTG */ + usb1_phy: phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + usb3_phy: phy@12520000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + usb4_phy: phy@12530000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + gadget1: gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb1: usb@12500000 { + status = "okay"; + }; + + usb3: usb@12520000 { + status = "okay"; + }; + + usb4: usb@12530000 { + status = "okay"; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 6c1511263a55..df2061ec630d 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -2,6 +2,7 @@ #include "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/reset/qcom,gcc-msm8960.h> #include <dt-bindings/clock/qcom,mmcc-msm8960.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -112,6 +113,20 @@ function = "ps_hold"; }; }; + + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + + i2c3_pins: i2c3 { + mux { + pins = "gpio8", "gpio9"; + function = "gsbi3"; + }; + }; }; intc: interrupt-controller@2000000 { @@ -225,6 +240,26 @@ }; }; + gsbi3: gsbi@16200000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16200000 0x100>; + clocks = <&gcc GSBI3_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c3: i2c@16280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16280000 0x1000>; + interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI3_QUP_CLK>, + <&gcc GSBI3_H_CLK>; + clock-names = "core", "iface"; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; @@ -235,10 +270,9 @@ #address-cells = <1>; #size-cells = <1>; ranges; - syscon-tcsr = <&tcsr>; - serial@16640000 { + gsbi7_serial: serial@16640000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, <0x16600000 0x1000>; @@ -276,6 +310,143 @@ #reset-cells = <1>; }; + l2cc: clock-controller@2011000 { + compatible = "syscon"; + reg = <0x2011000 0x1000>; + }; + + rpm@108000 { + compatible = "qcom,rpm-apq8064"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; + + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + + pm8921_hdmi_switch: hdmi-switch { + bias-pull-down; + }; + }; + }; + + usb1_phy: phy@12500000 { + compatible = "qcom,usb-otg-ci"; + reg = <0x12500000 0x400>; + interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>; + status = "disabled"; + dr_mode = "host"; + + clocks = <&gcc USB_HS1_XCVR_CLK>, + <&gcc USB_HS1_H_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc USB_HS1_RESET>; + reset-names = "link"; + }; + + usb3_phy: phy@12520000 { + compatible = "qcom,usb-otg-ci"; + reg = <0x12520000 0x400>; + interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; + status = "disabled"; + dr_mode = "host"; + + clocks = <&gcc USB_HS3_XCVR_CLK>, + <&gcc USB_HS3_H_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc USB_HS3_RESET>; + reset-names = "link"; + }; + + usb4_phy: phy@12530000 { + compatible = "qcom,usb-otg-ci"; + reg = <0x12530000 0x400>; + interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>; + status = "disabled"; + dr_mode = "host"; + + clocks = <&gcc USB_HS4_XCVR_CLK>, + <&gcc USB_HS4_H_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc USB_HS4_RESET>; + reset-names = "link"; + }; + + gadget1: gadget@12500000 { + compatible = "qcom,ci-hdrc"; + reg = <0x12500000 0x400>; + status = "disabled"; + dr_mode = "peripheral"; + interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>; + usb-phy = <&usb1_phy>; + }; + + usb1: usb@12500000 { + compatible = "qcom,ehci-host"; + reg = <0x12500000 0x400>; + interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>; + status = "disabled"; + usb-phy = <&usb1_phy>; + }; + + usb3: usb@12520000 { + compatible = "qcom,ehci-host"; + reg = <0x12520000 0x400>; + interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; + status = "disabled"; + usb-phy = <&usb3_phy>; + }; + + usb4: usb@12530000 { + compatible = "qcom,ehci-host"; + reg = <0x12530000 0x400>; + interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>; + status = "disabled"; + usb-phy = <&usb4_phy>; + }; + + sata_phy0: phy@1b400000 { + compatible = "qcom,apq8064-sata-phy"; + status = "disabled"; + reg = <0x1b400000 0x200>; + reg-names = "phy_mem"; + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + #phy-cells = <0>; + }; + + sata0: sata@29000000 { + compatible = "generic-ahci"; + status = "disabled"; + reg = <0x29000000 0x180>; + interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_iface", + "iface", + "bus", + "rxoob", + "core_pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy0>; + phy-names = "sata-phy"; + }; + /* Temporary fixed regulator */ vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 20bbd19b996e..e0b2ce2910e0 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -37,6 +37,11 @@ }; }; + cpu-pmu { + compatible = "qcom,scorpion-mp-pmu"; + interrupts = <1 9 0x304>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi index 73813cc118f9..8f1a0b162017 100644 --- a/arch/arm/boot/dts/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -1,3 +1,4 @@ +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { @@ -7,6 +8,23 @@ reg = <0x4 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8841_mpps: mpps@a000 { + compatible = "qcom,pm8841-mpp"; + reg = <0xa000 0x400>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <4 0xa0 0 IRQ_TYPE_NONE>, + <4 0xa1 0 IRQ_TYPE_NONE>, + <4 0xa2 0 IRQ_TYPE_NONE>, + <4 0xa3 0 IRQ_TYPE_NONE>; + }; + + temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>; + }; }; usid5: pm8841@5 { diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 24c5088acea2..aa774e685018 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -1,3 +1,5 @@ +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { @@ -7,12 +9,141 @@ reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000 0x100>, + <0x6100 0x100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pwrkey@800 { + compatible = "qcom,pm8941-pwrkey"; + reg = <0x800 0x100>; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; + + pm8941_gpios: gpios@c000 { + compatible = "qcom,pm8941-gpio"; + reg = <0xc000 0x2400>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>, + <0 0xcc 0 IRQ_TYPE_NONE>, + <0 0xcd 0 IRQ_TYPE_NONE>, + <0 0xce 0 IRQ_TYPE_NONE>, + <0 0xcf 0 IRQ_TYPE_NONE>, + <0 0xd0 0 IRQ_TYPE_NONE>, + <0 0xd1 0 IRQ_TYPE_NONE>, + <0 0xd2 0 IRQ_TYPE_NONE>, + <0 0xd3 0 IRQ_TYPE_NONE>, + <0 0xd4 0 IRQ_TYPE_NONE>, + <0 0xd5 0 IRQ_TYPE_NONE>, + <0 0xd6 0 IRQ_TYPE_NONE>, + <0 0xd7 0 IRQ_TYPE_NONE>, + <0 0xd8 0 IRQ_TYPE_NONE>, + <0 0xd9 0 IRQ_TYPE_NONE>, + <0 0xda 0 IRQ_TYPE_NONE>, + <0 0xdb 0 IRQ_TYPE_NONE>, + <0 0xdc 0 IRQ_TYPE_NONE>, + <0 0xdd 0 IRQ_TYPE_NONE>, + <0 0xde 0 IRQ_TYPE_NONE>, + <0 0xdf 0 IRQ_TYPE_NONE>, + <0 0xe0 0 IRQ_TYPE_NONE>, + <0 0xe1 0 IRQ_TYPE_NONE>, + <0 0xe2 0 IRQ_TYPE_NONE>, + <0 0xe3 0 IRQ_TYPE_NONE>; + }; + + pm8941_mpps: mpps@a000 { + compatible = "qcom,pm8941-mpp"; + reg = <0xa000 0x800>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>, + <0 0xa4 0 IRQ_TYPE_NONE>, + <0 0xa5 0 IRQ_TYPE_NONE>, + <0 0xa6 0 IRQ_TYPE_NONE>, + <0 0xa7 0 IRQ_TYPE_NONE>; + }; + + pm8941_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8941_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8941_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100 0x100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + die_temp { + reg = <VADC_DIE_TEMP>; + }; + ref_625mv { + reg = <VADC_REF_625MV>; + }; + ref_1250v { + reg = <VADC_REF_1250MV>; + }; + ref_gnd { + reg = <VADC_GND_REF>; + }; + ref_vdd { + reg = <VADC_VDD_VADC>; + }; + }; + + pm8941_iadc: iadc@3600 { + compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; + reg = <0x3600 0x100>, + <0x12f1 0x1>; + interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; + qcom,external-resistor-micro-ohms = <10000>; + }; }; usid1: pm8941@1 { - compatible ="qcom,spmi-pmic"; + compatible = "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + wled@d800 { + compatible = "qcom,pm8941-wled"; + reg = <0xd800 0x100>; + label = "backlight"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index a5a4fe695a46..5e240ccc08b7 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -1,3 +1,5 @@ +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { @@ -7,6 +9,96 @@ reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000 0x100>, + <0x6100 0x100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pma8084_gpios: gpios@c000 { + compatible = "qcom,pma8084-gpio"; + reg = <0xc000 0x1600>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>, + <0 0xcc 0 IRQ_TYPE_NONE>, + <0 0xcd 0 IRQ_TYPE_NONE>, + <0 0xce 0 IRQ_TYPE_NONE>, + <0 0xcf 0 IRQ_TYPE_NONE>, + <0 0xd0 0 IRQ_TYPE_NONE>, + <0 0xd1 0 IRQ_TYPE_NONE>, + <0 0xd2 0 IRQ_TYPE_NONE>, + <0 0xd3 0 IRQ_TYPE_NONE>, + <0 0xd4 0 IRQ_TYPE_NONE>, + <0 0xd5 0 IRQ_TYPE_NONE>; + }; + + pma8084_mpps: mpps@a000 { + compatible = "qcom,pma8084-mpp"; + reg = <0xa000 0x800>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>, + <0 0xa4 0 IRQ_TYPE_NONE>, + <0 0xa5 0 IRQ_TYPE_NONE>, + <0 0xa6 0 IRQ_TYPE_NONE>, + <0 0xa7 0 IRQ_TYPE_NONE>; + }; + + pma8084_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; + io-channels = <&pma8084_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + }; + + pma8084_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100 0x100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + io-channel-ranges; + + die_temp { + reg = <VADC_DIE_TEMP>; + }; + ref_625mv { + reg = <VADC_REF_625MV>; + }; + ref_1250v { + reg = <VADC_REF_1250MV>; + }; + ref_buf_625mv { + reg = <VADC_SPARE1>; + }; + ref_gnd { + reg = <VADC_GND_REF>; + }; + ref_vdd { + reg = <VADC_VDD_VADC>; + }; + }; }; usid1: pma8084@1 { diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 81a38ceee098..a4c425923c05 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -147,7 +147,7 @@ &i2c5 { status = "okay"; - vdd_dvfs: max8973@1b { + vdd_dvfs: regulator@1b { compatible = "maxim,max8973"; reg = <0x1b>; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 0fd889f88109..7ee22a41c6c9 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -163,6 +163,7 @@ <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>, <0 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A73A4_CLK_IRQC>; power-domains = <&pd_c4>; }; @@ -197,6 +198,7 @@ <0 55 IRQ_TYPE_LEVEL_HIGH>, <0 56 IRQ_TYPE_LEVEL_HIGH>, <0 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A73A4_CLK_IRQC>; power-domains = <&pd_c4>; }; @@ -724,15 +726,16 @@ mstp4_clks: mstp4_clks@e6150140 { compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_HP>, + clocks = <&main_div2_clk>, <&main_div2_clk>, + <&cpg_clocks R8A73A4_CLK_HP>, <&cpg_clocks R8A73A4_CLK_HP>; #clock-cells = <1>; clock-indices = < - R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4 - R8A73A4_CLK_IIC3 + R8A73A4_CLK_IRQC R8A73A4_CLK_IIC5 + R8A73A4_CLK_IIC4 R8A73A4_CLK_IIC3 >; clock-output-names = - "iic5", "iic4", "iic3"; + "irqc", "iic5", "iic4", "iic3"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 9bd0cb439f44..2e31d8c01cbf 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -208,7 +208,7 @@ gpios = <&pfc 166 GPIO_ACTIVE_LOW>; }; - wm8978: wm8978@1a { + wm8978: codec@1a { #sound-dai-cells = <0>; compatible = "wlf,wm8978"; reg = <0x1a>; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 83c1c3ca1b8f..d84714468cce 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -67,7 +67,7 @@ }; /* irqpin0: IRQ0 - IRQ7 */ - irqpin0: irqpin@e6900000 { + irqpin0: interrupt-controller@e6900000 { compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -89,7 +89,7 @@ }; /* irqpin1: IRQ8 - IRQ15 */ - irqpin1: irqpin@e6900004 { + irqpin1: interrupt-controller@e6900004 { compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -111,7 +111,7 @@ }; /* irqpin2: IRQ16 - IRQ23 */ - irqpin2: irqpin@e6900008 { + irqpin2: interrupt-controller@e6900008 { compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -133,7 +133,7 @@ }; /* irqpin3: IRQ24 - IRQ31 */ - irqpin3: irqpin@e690000c { + irqpin3: interrupt-controller@e690000c { compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -275,7 +275,7 @@ status = "disabled"; }; - scifb8: serial@e6c30000 { + scifb: serial@e6c30000 { compatible = "renesas,scifb-r8a7740", "renesas,scifb"; reg = <0xe6c30000 0x100>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index 04c0c37bb784..dffa6ff30360 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -119,7 +119,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl008k"; + compatible = "spansion,s25fl008k", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 787fa6f9f46d..90543b12d7e2 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -85,7 +85,7 @@ &i2c0 { status = "okay"; - ak4643: sound-codec@12 { + ak4643: codec@12 { compatible = "asahi-kasei,ak4643"; #sound-dai-cells = <0>; reg = <0x12>; @@ -186,7 +186,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl008k"; + compatible = "spansion,s25fl008k", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 868f97309533..7ce9f5fd5865 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -68,7 +68,7 @@ }; /* irqpin: IRQ0 - IRQ3 */ - irqpin: irqpin@fe78001c { + irqpin: interrupt-controller@fe78001c { compatible = "renesas,intc-irqpin-r8a7778", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 540756cdf391..20afea6f06ef 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -42,10 +42,10 @@ regulator-always-on; }; - lan0@18000000 { + ethernet@18000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x18000000 0x100>; - pinctrl-0 = <&lan0_pins>; + pinctrl-0 = <ðernet_pins>; pinctrl-names = "default"; phy-mode = "mii"; @@ -176,7 +176,7 @@ }; }; - lan0_pins: lan0 { + ethernet_pins: ethernet { intc { renesas,groups = "intc_irq1_b"; renesas,function = "intc"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 5c2219b9f3eb..5c8071e87ae9 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -148,7 +148,7 @@ interrupt-controller; }; - irqpin0: irqpin@fe780010 { + irqpin0: interrupt-controller@fe780010 { compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin"; #interrupt-cells = <2>; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index aaa4f258e279..2eb8a995ae9f 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -429,7 +429,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl512s"; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; spi-tx-bus-width = <4>; @@ -525,7 +525,7 @@ clock-frequency = <100000>; - ak4643: sound-codec@12 { + ak4643: codec@12 { compatible = "asahi-kasei,ak4643"; #sound-dai-cells = <0>; reg = <0x12>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 4bb2f4c17321..51ab8865ea37 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -252,6 +252,7 @@ <0 1 IRQ_TYPE_LEVEL_HIGH>, <0 2 IRQ_TYPE_LEVEL_HIGH>, <0 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7790_CLK_IRQC>; }; dmac0: dma-controller@e6700000 { @@ -370,6 +371,28 @@ dma-channels = <13>; }; + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH + 0 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH + 0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>; + #dma-cells = <1>; + dma-channels = <2>; + }; + i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -467,6 +490,7 @@ dma-names = "tx", "rx"; reg-io-width = <4>; status = "disabled"; + max-frequency = <97500000>; }; mmcif1: mmc@ee220000 { @@ -478,6 +502,7 @@ dma-names = "tx", "rx"; reg-io-width = <4>; status = "disabled"; + max-frequency = <97500000>; }; pfc: pfc@e6060000 { @@ -531,6 +556,8 @@ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -540,6 +567,8 @@ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -549,6 +578,8 @@ interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -558,6 +589,8 @@ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -567,6 +600,8 @@ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -576,6 +611,8 @@ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -585,6 +622,8 @@ interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_SCIF0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -594,6 +633,8 @@ interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_SCIF1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -603,6 +644,8 @@ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -612,6 +655,8 @@ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -650,6 +695,9 @@ renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb"; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; status = "disabled"; }; @@ -1158,6 +1206,14 @@ "iic0", "pciec", "iic1", "ssusb", "cmt1", "usbdmac0", "usbdmac1"; }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&cp_clk>; + #clock-cells = <1>; + clock-indices = <R8A7790_CLK_IRQC>; + clock-output-names = "irqc"; + }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; @@ -1273,7 +1329,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; @@ -1285,7 +1341,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; @@ -1297,7 +1353,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; @@ -1309,7 +1365,7 @@ msiof3: spi@e6c90000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>; + reg = <0 0xe6c90000 0 0x0064>; interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; dmas = <&dmac0 0x45>, <&dmac0 0x46>; @@ -1442,7 +1498,7 @@ status = "disabled"; }; - rcar_sound: rcar_sound@ec500000 { + rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required * diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index e33e4047b0b0..655d1804e5e9 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -226,7 +226,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl512s"; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; spi-tx-bus-width = <4>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 824ddab9c3ad..cffe33ff4d16 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -474,7 +474,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl512s"; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; spi-tx-bus-width = <4>; @@ -522,7 +522,7 @@ status = "okay"; clock-frequency = <100000>; - ak4643: sound-codec@12 { + ak4643: codec@12 { compatible = "asahi-kasei,ak4643"; #sound-dai-cells = <0>; reg = <0x12>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 4696062f6dde..dc1cd3f16606 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -239,6 +239,7 @@ <0 15 IRQ_TYPE_LEVEL_HIGH>, <0 16 IRQ_TYPE_LEVEL_HIGH>, <0 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7791_CLK_IRQC>; }; dmac0: dma-controller@e6700000 { @@ -357,6 +358,28 @@ dma-channels = <13>; }; + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH + 0 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH + 0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>; + #dma-cells = <1>; + dma-channels = <2>; + }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; @@ -471,6 +494,7 @@ dma-names = "tx", "rx"; reg-io-width = <4>; status = "disabled"; + max-frequency = <97500000>; }; sdhi0: sd@ee100000 { @@ -509,6 +533,8 @@ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -518,6 +544,8 @@ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -527,6 +555,8 @@ interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -536,6 +566,8 @@ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -545,6 +577,8 @@ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -554,6 +588,8 @@ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>; clock-names = "sci_ick"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -563,6 +599,8 @@ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -572,6 +610,8 @@ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -581,6 +621,8 @@ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -590,6 +632,8 @@ interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -599,6 +643,8 @@ interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -608,6 +654,8 @@ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -617,6 +665,8 @@ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF3>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -626,6 +676,8 @@ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF4>; clock-names = "sci_ick"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -635,6 +687,8 @@ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF5>; clock-names = "sci_ick"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -644,6 +698,8 @@ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -653,6 +709,8 @@ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -662,6 +720,8 @@ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -700,6 +760,9 @@ renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb"; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; status = "disabled"; }; @@ -1160,6 +1223,14 @@ "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1", "usbdmac0", "usbdmac1"; }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&cp_clk>; + #clock-cells = <1>; + clock-indices = <R8A7791_CLK_IRQC>; + clock-output-names = "irqc"; + }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; @@ -1288,7 +1359,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; @@ -1300,7 +1371,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; @@ -1312,7 +1383,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; @@ -1485,7 +1556,7 @@ status = "disabled"; }; - rcar_sound: rcar_sound@ec500000 { + rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required * diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 7a3ffa51a8bf..b73819423311 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -105,6 +105,7 @@ <0 15 IRQ_TYPE_LEVEL_HIGH>, <0 16 IRQ_TYPE_LEVEL_HIGH>, <0 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7794_CLK_IRQC>; }; dmac0: dma-controller@e6700000 { @@ -173,6 +174,8 @@ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -182,6 +185,8 @@ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -191,6 +196,8 @@ interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -200,6 +207,8 @@ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -209,6 +218,8 @@ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -218,6 +229,8 @@ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; clock-names = "sci_ick"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -227,6 +240,8 @@ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -236,6 +251,8 @@ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -245,6 +262,8 @@ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -254,6 +273,8 @@ interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -263,6 +284,8 @@ interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -272,6 +295,8 @@ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -281,6 +306,8 @@ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF3>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -290,6 +317,8 @@ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF4>; clock-names = "sci_ick"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -299,6 +328,8 @@ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF5>; clock-names = "sci_ick"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -308,6 +339,8 @@ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -317,6 +350,8 @@ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -326,6 +361,8 @@ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -625,6 +662,14 @@ "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1", "usbdmac0", "usbdmac1"; }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&cp_clk>; + #clock-cells = <1>; + clock-indices = <R8A7794_CLK_IRQC>; + clock-output-names = "irqc"; + }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index baf21ac6ce7f..b299b26926d4 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -2,15 +2,43 @@ * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 41ffd4951ef3..d32229b8a996 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -2,15 +2,43 @@ * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index bdf85701987d..42faa19edb7e 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -1,15 +1,43 @@ /* * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -152,6 +180,7 @@ compatible = "active-semi,act8846"; reg = <0x5a>; status = "okay"; + system-power-controller; pinctrl-names = "default"; pinctrl-0 = <&act8846_dvs0_ctl>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 1d4d79c6688d..0f23aedf9349 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -2,15 +2,43 @@ * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 1687e8336994..43949a6771f0 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -1,13 +1,41 @@ /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index f62ea78754a9..18eb6cb495f4 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -1,13 +1,41 @@ /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 4a457518d861..844a6fb64658 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -1,13 +1,41 @@ /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/pwm/pwm.h> @@ -112,6 +140,23 @@ regulator-always-on; regulator-boot-on; }; + + /* + * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from + * vcc_io directly. Those boards won't be able to power cycle SD cards + * but it shouldn't hurt to toggle this pin there anyway. + */ + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; }; &emmc { @@ -141,6 +186,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; status = "okay"; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; }; &i2c0 { @@ -232,6 +279,10 @@ sdmmc_cmd: sdmmc-cmd { rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; }; + + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; usb { diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index b54dd78580c1..0b42372e4379 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -246,6 +246,14 @@ pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; system-power-controller; + vp1-supply = <&vcc_sys>; + vp2-supply = <&vcc_sys>; + vp3-supply = <&vcc_sys>; + vp4-supply = <&vcc_sys>; + inl1-supply = <&vcc_sys>; + inl2-supply = <&vcc_sys>; + inl3-supply = <&vcc_20>; + regulators { vcc_ddr: REG1 { regulator-name = "vcc_ddr"; @@ -457,6 +465,12 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index d081f0e0da36..d582811fbd7b 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -406,6 +406,12 @@ }; }; +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + &vopb { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-thermal.dtsi b/arch/arm/boot/dts/rk3288-thermal.dtsi index 2695200c0af7..340406652186 100644 --- a/arch/arm/boot/dts/rk3288-thermal.dtsi +++ b/arch/arm/boot/dts/rk3288-thermal.dtsi @@ -3,9 +3,43 @@ * * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/thermal/thermal.h> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 165968d51d8f..22316d00493e 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1,13 +1,41 @@ /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -44,6 +72,14 @@ spi2 = &spi2; }; + arm-pmu { + compatible = "arm,cortex-a12-pmu"; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -434,6 +470,7 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_USBHOST1>; clock-names = "otg"; + dr_mode = "host"; phys = <&usbphy2>; phy-names = "usb2-phy"; status = "disabled"; @@ -446,6 +483,11 @@ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_OTG0>; clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <275>; + g-tx-fifo-size = <256 128 128 64 64 32>; + g-use-dma; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index c54a9715dcfa..a2ae9f32464d 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -2,15 +2,43 @@ * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index ea92fd69529a..f257926c13b7 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -31,55 +31,55 @@ #clock-cells = <0>; }; }; +}; - serial@50000000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_data>, <&uart0_fctl>; - }; +&rtc { + status = "okay"; +}; - serial@50004000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_data>, <&uart1_fctl>; - }; +&sdhci_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, + <&sd1_bus1>, <&sd1_bus4>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; - serial@50008000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_data>; - }; +&sdhci_1 { + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, + <&sd0_bus1>, <&sd0_bus4>; + bus-width = <4>; + cd-gpios = <&gpf 1 0>; + cd-inverted; + status = "okay"; +}; - serial@5000C000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_data>; - }; +&uart_0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data>, <&uart0_fctl>; +}; - watchdog@53000000 { - status = "okay"; - }; +&uart_1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>, <&uart1_fctl>; +}; - rtc@57000000 { - status = "okay"; - }; +&uart_2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data>; +}; - sdhci@4AC00000 { - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, - <&sd0_bus1>, <&sd0_bus4>; - bus-width = <4>; - cd-gpios = <&gpf 1 0>; - cd-inverted; - status = "okay"; - }; +&uart_3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_data>; +}; - sdhci@4A800000 { - pinctrl-names = "default"; - pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, - <&sd1_bus1>, <&sd1_bus4>; - bus-width = <4>; - broken-cd; - status = "okay"; - }; +&watchdog { + status = "okay"; }; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 30b8f7e47454..a5184ff56933 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -17,7 +17,7 @@ compatible = "samsung,s3c2416"; aliases { - serial3 = &uart3; + serial3 = &uart_3; }; cpus { @@ -48,7 +48,7 @@ clock-names = "timers"; }; - serial@50000000 { + uart_0: serial@50000000 { compatible = "samsung,s3c2440-uart"; clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; @@ -56,7 +56,7 @@ <&clocks SCLK_UART>; }; - serial@50004000 { + uart_1: serial@50004000 { compatible = "samsung,s3c2440-uart"; clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; @@ -64,7 +64,7 @@ <&clocks SCLK_UART>; }; - serial@50008000 { + uart_2: serial@50008000 { compatible = "samsung,s3c2440-uart"; clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; @@ -72,7 +72,7 @@ <&clocks SCLK_UART>; }; - uart3: serial@5000C000 { + uart_3: serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; @@ -83,7 +83,7 @@ status = "disabled"; }; - sdhci@4AC00000 { + sdhci_1: sdhci@4AC00000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; @@ -94,7 +94,7 @@ status = "disabled"; }; - sdhci@4A800000 { + sdhci_0: sdhci@4A800000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; @@ -105,13 +105,13 @@ status = "disabled"; }; - watchdog@53000000 { + watchdog: watchdog@53000000 { interrupts = <1 9 27 3>; clocks = <&clocks PCLK_WDT>; clock-names = "watchdog"; }; - rtc@57000000 { + rtc: rtc@57000000 { compatible = "samsung,s3c2416-rtc"; clocks = <&clocks PCLK_RTC>; clock-names = "rtc"; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 57ab8587f7b9..5ab7548e04e1 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1439,9 +1439,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, - <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1449,8 +1448,8 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; - clock-names = "usb_clk", "ehci_clk", "uhpck"; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -1478,7 +1477,7 @@ #address-cells = <1>; #size-cells = <1>; reg = < - 0x70000000 0x10000000 /* NFC Command Registers */ + 0x70000000 0x08000000 /* NFC Command Registers */ 0xffffc000 0x00000070 /* NFC HSMC regs */ 0x00200000 0x00100000 /* NFC SRAM banks */ >; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 7d6babdab039..2cf9c3611db6 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -11,7 +11,8 @@ compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; chosen { - bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs"; + bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs"; + stdout-path = "serial0:115200n8"; }; memory { @@ -67,12 +68,6 @@ rxd3-skew-ps = <400>; }; }; - - pmc: pmc@fffffc00 { - main: mainck { - clock-frequency = <12000000>; - }; - }; }; nand0: nand@60000000 { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 6b1bb58f9c0b..653a1f851f2b 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -59,6 +59,10 @@ serial0 = &usart3; serial1 = &usart4; serial2 = &usart2; + serial3 = &usart0; + serial4 = &usart1; + serial5 = &uart0; + serial6 = &uart1; gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; @@ -254,9 +258,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, - <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -264,8 +267,8 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; - clock-names = "usb_clk", "ehci_clk", "uhpck"; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -299,7 +302,7 @@ #address-cells = <1>; #size-cells = <1>; reg = < - 0x90000000 0x10000000 /* NFC Command Registers */ + 0x90000000 0x08000000 /* NFC Command Registers */ 0xfc05c000 0x00000070 /* NFC HSMC regs */ 0x00100000 0x00100000 /* NFC SRAM banks */ >; @@ -847,6 +850,24 @@ clock-names = "mci_clk"; }; + uart0: serial@f8004000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8004000 0x100>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(22))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(23))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + ssc0: ssc@f8008000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf8008000 0x4000>; @@ -977,6 +998,42 @@ reg = <0xf8028000 0x60>; }; + usart0: serial@f802c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf802c000 0x100>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(36))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(37))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>; + clocks = <&usart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart1: serial@f8030000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8030000 0x100>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(38))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(39))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>; + clocks = <&usart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + mmc1: mmc@fc000000 { compatible = "atmel,hsmci"; reg = <0xfc000000 0x600>; @@ -994,6 +1051,24 @@ clock-names = "mci_clk"; }; + uart1: serial@fc004000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfc004000 0x100>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(24))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(25))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + usart2: serial@fc008000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; @@ -1066,6 +1141,46 @@ status = "disabled"; }; + spi1: spi@fc018000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfc018000 0x100>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(12))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(13))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + spi2: spi@fc01c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfc01c000 0x100>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(14))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(15))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + clocks = <&spi2_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + tcb1: timer@fc020000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xfc020000 0x100>; @@ -1125,10 +1240,10 @@ compatible = "atmel,at91sam9g46-aes"; reg = <0xfc044000 0x100>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(41)>, - <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(40)>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(41))>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(40))>; dma-names = "tx", "rx"; clocks = <&aes_clk>; clock-names = "aes_clk"; @@ -1139,10 +1254,10 @@ compatible = "atmel,at91sam9g46-tdes"; reg = <0xfc04c000 0x100>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(42)>, - <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(43)>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(42))>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(43))>; dma-names = "tx", "rx"; clocks = <&tdes_clk>; clock-names = "tdes_clk"; @@ -1153,8 +1268,8 @@ compatible = "atmel,at91sam9g46-sha"; reg = <0xfc050000 0x100>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>; - dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(44)>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(44))>; dma-names = "tx"; clocks = <&sha_clk>; clock-names = "sha_clk"; @@ -1232,7 +1347,8 @@ #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; - ranges = <0xfc06a000 0xfc06a000 0x4000>; + ranges = <0xfc068000 0xfc068000 0x100 + 0xfc06a000 0xfc06a000 0x4000>; /* WARNING: revisit as pin spec has changed */ atmel,mux-mask = < /* A B C */ @@ -1623,6 +1739,74 @@ }; }; + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MISO */ + AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MOSI */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_SPCK */ + >; + }; + }; + + spi2 { + pinctrl_spi2: spi2-0 { + atmel,pins = + <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MISO conflicts with RTS0 */ + AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MOSI conflicts with TXD0 */ + AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_SPCK conflicts with RTS1 */ + >; + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */ + AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_NONE /* RXD */ + AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + }; + + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */ + AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */ + AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + usart2 { pinctrl_usart2: usart2-0 { atmel,pins = diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 022ba505f573..24b4cd24dceb 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -147,6 +147,7 @@ gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; label = "SW1"; + gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 45b539ce4d35..11e17c5f26e2 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -90,7 +90,7 @@ status = "disabled"; }; - irqpin0: irqpin@e6900000 { + irqpin0: interrupt-controller@e6900000 { compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -112,7 +112,7 @@ control-parent; }; - irqpin1: irqpin@e6900004 { + irqpin1: interrupt-controller@e6900004 { compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -134,7 +134,7 @@ control-parent; }; - irqpin2: irqpin@e6900008 { + irqpin2: interrupt-controller@e6900008 { compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -156,7 +156,7 @@ control-parent; }; - irqpin3: irqpin@e690000c { + irqpin3: interrupt-controller@e690000c { compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -376,7 +376,7 @@ status = "disabled"; }; - scifb8: serial@e6c30000 { + scifb: serial@e6c30000 { compatible = "renesas,scifb-sh73a0", "renesas,scifb"; reg = <0xe6c30000 0x100>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index d9176e606173..80f924deed37 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -36,6 +36,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "altr,socfpga-smp"; cpu@0 { compatible = "arm,cortex-a9"; @@ -451,6 +452,14 @@ clk-phase = <0 135>; }; + sdmmc_clk_divided: sdmmc_clk_divided { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&sdmmc_clk>; + clk-gate = <0xa0 8>; + fixed-divider = <4>; + }; + nand_x_clk: nand_x_clk { #clock-cells = <0>; compatible = "altr,socfpga-gate-clk"; @@ -488,6 +497,8 @@ reset-names = "stmmaceth"; snps,multicast-filter-bins = <256>; snps,perfect-filter-entries = <128>; + tx-fifo-depth = <4096>; + rx-fifo-depth = <4096>; status = "disabled"; }; @@ -504,6 +515,8 @@ reset-names = "stmmaceth"; snps,multicast-filter-bins = <256>; snps,perfect-filter-entries = <128>; + tx-fifo-depth = <4096>; + rx-fifo-depth = <4096>; status = "disabled"; }; @@ -635,7 +648,7 @@ fifo-depth = <0x400>; #address-cells = <1>; #size-cells = <0>; - clocks = <&l4_mp_clk>, <&sdmmc_clk>; + clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>; clock-names = "biu", "ciu"; }; @@ -655,6 +668,11 @@ status = "disabled"; }; + scu: snoop-control-unit@fffec000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xfffec000 0x100>; + }; + spi1: spi@fff01000 { compatible = "snps,dw-apb-ssi"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 8a05c47fd57f..f5bebdd6d1be 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -21,21 +21,10 @@ #address-cells = <1>; #size-cells = <1>; - aliases { - ethernet0 = &gmac0; - ethernet1 = &gmac1; - ethernet2 = &gmac2; - serial0 = &uart0; - serial1 = &uart1; - timer0 = &timer0; - timer1 = &timer1; - timer2 = &timer2; - timer3 = &timer3; - }; - cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "altr,socfpga-a10-smp"; cpu@0 { compatible = "arm,cortex-a9"; @@ -98,6 +87,21 @@ #address-cells = <1>; #size-cells = <0>; + cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + cb_intosc_ls_clk: cb_intosc_ls_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + f2s_free_clk: f2s_free_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + osc1: osc1 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -107,47 +111,338 @@ #address-cells = <1>; #size-cells = <0>; #clock-cells = <0>; - compatible = "altr,socfpga-pll-clock"; - clocks = <&osc1>; + compatible = "altr,socfpga-a10-pll-clock"; + clocks = <&osc1>, <&cb_intosc_ls_clk>, + <&f2s_free_clk>; + reg = <0x40>; + + main_mpu_base_clk: main_mpu_base_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + div-reg = <0x140 0 11>; + }; + + main_noc_base_clk: main_noc_base_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + div-reg = <0x144 0 11>; + }; + + main_emaca_clk: main_emaca_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x68>; + }; + + main_emacb_clk: main_emacb_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x6C>; + }; + + main_emac_ptp_clk: main_emac_ptp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x70>; + }; + + main_gpio_db_clk: main_gpio_db_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x74>; + }; + + main_sdmmc_clk: main_sdmmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk" +; + clocks = <&main_pll>; + reg = <0x78>; + }; + + main_s2f_usr0_clk: main_s2f_usr0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x7C>; + }; + + main_s2f_usr1_clk: main_s2f_usr1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x80>; + }; + + main_hmc_pll_ref_clk: main_hmc_pll_ref_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x84>; + }; + + main_periph_ref_clk: main_periph_ref_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x9C>; + }; }; periph_pll: periph_pll { #address-cells = <1>; #size-cells = <0>; #clock-cells = <0>; - compatible = "altr,socfpga-pll-clock"; - clocks = <&osc1>; + compatible = "altr,socfpga-a10-pll-clock"; + clocks = <&osc1>, <&cb_intosc_ls_clk>, + <&f2s_free_clk>, <&main_periph_ref_clk>; + reg = <0xC0>; + + peri_mpu_base_clk: peri_mpu_base_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + div-reg = <0x140 16 11>; + }; + + peri_noc_base_clk: peri_noc_base_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + div-reg = <0x144 16 11>; + }; + + peri_emaca_clk: peri_emaca_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0xE8>; + }; + + peri_emacb_clk: peri_emacb_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0xEC>; + }; + + peri_emac_ptp_clk: peri_emac_ptp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0xF0>; + }; + + peri_gpio_db_clk: peri_gpio_db_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0xF4>; + }; + + peri_sdmmc_clk: peri_sdmmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0xF8>; + }; + + peri_s2f_usr0_clk: peri_s2f_usr0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0xFC>; + }; + + peri_s2f_usr1_clk: peri_s2f_usr1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0x100>; + }; + + peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0x104>; + }; + }; + + mpu_free_clk: mpu_free_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>, + <&osc1>, <&cb_intosc_hs_div2_clk>, + <&f2s_free_clk>; + reg = <0x60>; + }; + + noc_free_clk: noc_free_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>, + <&osc1>, <&cb_intosc_hs_div2_clk>, + <&f2s_free_clk>; + reg = <0x64>; + }; + + s2f_user1_free_clk: s2f_user1_free_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>, + <&osc1>, <&cb_intosc_hs_div2_clk>, + <&f2s_free_clk>; + reg = <0x104>; + }; + + sdmmc_free_clk: sdmmc_free_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>, + <&osc1>, <&cb_intosc_hs_div2_clk>, + <&f2s_free_clk>; + fixed-divider = <4>; + reg = <0xF8>; + }; + + l4_sys_free_clk: l4_sys_free_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&noc_free_clk>; + fixed-divider = <4>; + }; + + l4_main_clk: l4_main_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&noc_free_clk>; + div-reg = <0xA8 0 2>; + clk-gate = <0x48 1>; + }; + + l4_mp_clk: l4_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&noc_free_clk>; + div-reg = <0xA8 8 2>; + clk-gate = <0x48 2>; + }; + + l4_sp_clk: l4_sp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&noc_free_clk>; + div-reg = <0xA8 16 2>; + clk-gate = <0x48 3>; + }; + + mpu_periph_clk: mpu_periph_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&mpu_free_clk>; + fixed-divider = <4>; + clk-gate = <0x48 0>; + }; + + sdmmc_clk: sdmmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&sdmmc_free_clk>; + clk-gate = <0xC8 5>; + }; + + qspi_clk: qspi_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&l4_main_clk>; + clk-gate = <0xC8 11>; + }; + + nand_clk: nand_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&l4_mp_clk>; + clk-gate = <0xC8 10>; + }; + + spi_m_clk: spi_m_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&l4_main_clk>; + clk-gate = <0xC8 9>; + }; + + usb_clk: usb_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&l4_mp_clk>; + clk-gate = <0xC8 8>; + }; + + s2f_usr1_clk: s2f_usr1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&peri_s2f_usr1_clk>; + clk-gate = <0xC8 6>; }; }; }; gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; + altr,sysmgr-syscon = <&sysmgr 0x44 0>; reg = <0xff800000 0x2000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; /* Filled in by bootloader */ mac-address = [00 00 00 00 00 00]; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + tx-fifo-depth = <4096>; + rx-fifo-depth = <16384>; + clocks = <&l4_mp_clk>; + clock-names = "stmmaceth"; status = "disabled"; }; gmac1: ethernet@ff802000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; + altr,sysmgr-syscon = <&sysmgr 0x48 0>; reg = <0xff802000 0x2000>; interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; /* Filled in by bootloader */ mac-address = [00 00 00 00 00 00]; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + tx-fifo-depth = <4096>; + rx-fifo-depth = <16384>; + clocks = <&l4_mp_clk>; + clock-names = "stmmaceth"; status = "disabled"; }; gmac2: ethernet@ff804000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; + altr,sysmgr-syscon = <&sysmgr 0x4C 0>; reg = <0xff804000 0x2000>; interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; /* Filled in by bootloader */ mac-address = [00 00 00 00 00 00]; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + tx-fifo-depth = <4096>; + rx-fifo-depth = <16384>; + clocks = <&l4_mp_clk>; + clock-names = "stmmaceth"; status = "disabled"; }; @@ -268,6 +563,9 @@ reg = <0xff808000 0x1000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; fifo-depth = <0x400>; + clocks = <&l4_mp_clk>, <&sdmmc_free_clk>; + clock-names = "biu", "ciu"; + status = "disabled"; }; ocram: sram@ffe00000 { @@ -281,9 +579,15 @@ reg = <0xffd05000 0x100>; }; + scu: snoop-control-unit@ffffc000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xffffc000 0x100>; + }; + sysmgr: sysmgr@ffd06000 { compatible = "altr,sys-mgr", "syscon"; reg = <0xffd06000 0x300>; + cpu1-start-addr = <0xffd06230>; }; /* Local timer */ @@ -291,30 +595,39 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xffffc600 0x100>; interrupts = <1 13 0xf04>; + clocks = <&mpu_periph_clk>; }; timer0: timer0@ffc02700 { compatible = "snps,dw-apb-timer"; interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffc02700 0x100>; + clocks = <&l4_sp_clk>; + clock-names = "timer"; }; timer1: timer1@ffc02800 { compatible = "snps,dw-apb-timer"; interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffc02800 0x100>; + clocks = <&l4_sp_clk>; + clock-names = "timer"; }; timer2: timer2@ffd00000 { compatible = "snps,dw-apb-timer"; interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffd00000 0x100>; + clocks = <&l4_sys_free_clk>; + clock-names = "timer"; }; timer3: timer3@ffd00100 { compatible = "snps,dw-apb-timer"; interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffd01000 0x100>; + clocks = <&l4_sys_free_clk>; + clock-names = "timer"; }; uart0: serial0@ffc02000 { @@ -323,6 +636,7 @@ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; uart1: serial1@ffc02100 { @@ -331,6 +645,8 @@ interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + clocks = <&l4_sp_clk>; + status = "disabled"; }; usbphy0: usbphy@0 { @@ -343,6 +659,8 @@ compatible = "snps,dwc2"; reg = <0xffb00000 0xffff>; interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_clk>; + clock-names = "otg"; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; @@ -361,6 +679,7 @@ compatible = "snps,dw-wdt"; reg = <0xffd00200 0x100>; interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sys_free_clk>; status = "disabled"; }; @@ -368,6 +687,7 @@ compatible = "snps,dw-wdt"; reg = <0xffd00300 0x100>; interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sys_free_clk>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi new file mode 100644 index 000000000000..94a0709b2fe6 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2015 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "socfpga_arria10.dtsi" + +/ { + model = "Altera SOCFPGA Arria 10"; + compatible = "altr,socfpga-arria10", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200 rootwait"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; + + soc { + clkmgr@ffd04000 { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; + }; +}; + +&gmac0 { + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; /* probe for phy addr */ + + /* + * These skews assume the user's FPGA design is adding 600ps of delay + * for TX_CLK on Arria 10. + * + * All skews are offset since hardware skew values for the ksz9031 + * range from a negative skew to a positive skew. + * See the micrel-ksz90x1.txt Documentation file for details. + */ + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <1860>; /* 960ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + max-frame-size = <3800>; + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts index 3015ce8d3057..dbbb751ac1ba 100755..100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 Altera Corporation <www.altera.com> + * Copyright (C) 2014-2015 Altera Corporation <www.altera.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -16,33 +16,11 @@ */ /dts-v1/; -#include "socfpga_arria10.dtsi" +#include "socfpga_arria10_socdk.dtsi" -/ { - model = "Altera SOCFPGA Arria 10"; - compatible = "altr,socfpga-arria10", "altr,socfpga"; - - chosen { - bootargs = "console=ttyS0,115200 rootwait"; - }; - - memory { - name = "memory"; - device_type = "memory"; - reg = <0x0 0x40000000>; /* 1GB */ - }; - - soc { - clkmgr@ffd04000 { - clocks { - osc1 { - clock-frequency = <25000000>; - }; - }; - }; - - serial0@ffc02000 { - status = "okay"; - }; - }; +&mmc { + status = "okay"; + num-slots = <1>; + broken-cd; + bus-width = <4>; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index 16ea6f5f2ab8..71468a7eb28f 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -68,3 +68,19 @@ &usb1 { status = "okay"; }; + +&gpio2 { + status = "okay"; +}; + +&i2c1{ + status = "okay"; + + accel1: accel1@53{ + compatible = "adxl34x"; + reg = <0x53>; + + interrupt-parent = < &portc >; + interrupts = <3 2>; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index a1814b457450..019dd2fea208 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -30,12 +30,23 @@ device_type = "memory"; reg = <0x0 0x40000000>; /* 1GB */ }; + + leds: gpio-leds { + }; }; &gmac1 { status = "okay"; }; +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -45,6 +56,26 @@ }; }; +&leds { + compatible = "gpio-leds"; + + led@0 { + label = "led:green:heartbeat"; + gpios = <&porta 28 1>; + linux,default-trigger = "heartbeat"; + }; + + led@1 { + label = "led:green:D7"; + gpios = <&portb 19 1>; + }; + + led@2 { + label = "led:green:D8"; + gpios = <&portb 25 1>; + }; +}; + &mmc { status = "okay"; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 2201cd5da3bb..853684ad7773 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -22,6 +22,160 @@ interrupt-parent = <&intc>; ranges; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + }; + }; + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + ptm@801ae000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x801ae000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + cpu = <&CPU0>; + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; + }; + }; + + ptm@801af000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x801af000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + cpu = <&CPU1>; + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; + }; + }; + + funnel@801a6000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x801a6000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output ports */ + port@0 { + reg = <0>; + funnel_out_port: endpoint { + remote-endpoint = + <&replicator_in_port0>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ptm0_out_port>; + }; + }; + + port@2 { + reg = <1>; + funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&ptm1_out_port>; + }; + }; + }; + }; + + replicator { + compatible = "arm,coresight-replicator"; + clocks = <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etb_in_port>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&funnel_out_port>; + }; + }; + }; + }; + + tpiu@80190000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x80190000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + port { + tpiu_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + + etb@801a4000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0x801a4000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + port { + etb_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + intc: interrupt-controller@a0411000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -31,6 +185,20 @@ <0xa0410100 0x100>; }; + scu@a04100000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xa0410000 0x100>; + }; + + /* + * The backup RAM is used for retention during sleep + * and various things like spin tables + */ + backupram@80150000 { + compatible = "ste,dbx500-backupram"; + reg = <0x80150000 0x2000>; + }; + L2: l2-cache { compatible = "arm,pl310-cache"; reg = <0xa0412000 0x1000>; @@ -91,6 +259,13 @@ clocks = <&smp_twd_clk>; }; + watchdog@a0410620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0xa0410620 0x20>; + interrupts = <1 14 0x304>; + clocks = <&smp_twd_clk>; + }; + rtc@80154000 { compatible = "arm,rtc-pl031", "arm,primecell"; reg = <0x80154000 0x1000>; diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index 7d4f8184c522..78b75256c638 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -77,6 +77,34 @@ }; }; + /* Sensors mounted on this board variant */ + i2c@80128000 { + lis331dl@1c { + /* Accelerometer */ + compatible = "st,lis331dl-accel"; + st,drdy-int-pin = <1>; + reg = <0x1c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_stuib_mode>; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>, + <19 IRQ_TYPE_EDGE_RISING>; + }; + ak8974@0f { + /* Magnetometer */ + compatible = "asahi-kasei,ak8974"; + reg = <0x0f>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&magneto_stuib_mode>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + }; + }; + i2c@80110000 { bu21013_tp@5c { compatible = "rohm,bu21013_tp"; @@ -116,6 +144,28 @@ }; }; }; + accelerometer { + accel_stuib_mode: accel_stuib { + /* Accelerometer interrupt lines 1 & 2 */ + stuib_cfg { + pins = "GPIO82_C1", "GPIO83_D3"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + magnetometer { + magneto_stuib_mode: magneto_stuib { + /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ + stuib_cfg1 { + pins = "GPIO31_V3"; + ste,config = <&gpio_in_pu>; + }; + stuib_cfg2 { + pins = "GPIO32_V2"; + ste,config = <&gpio_in_pd>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 062c6aae3afa..0e1c96943d47 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -99,10 +99,13 @@ vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&accel_tvk_mode>; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>, + <19 IRQ_TYPE_EDGE_RISING>; }; - lsm303dlm@1e { + lsm303dlh@1e { /* Magnetometer */ - compatible = "st,lsm303dlm-magn"; + compatible = "st,lsm303dlh-magn"; reg = <0x1e>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index f182f6538e90..9a5f2ba139b7 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -722,8 +722,9 @@ reg = <0x1a>; }; lis3lv02dl@1d { - compatible = "st,lis3lv02dl"; - reg = <0x1d>; + /* Accelerometer */ + compatible = "st,lis3lv02dl-accel"; + reg = <0x1d>; }; }; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 1bc84ebdccaa..9edadc37719f 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -262,15 +262,19 @@ vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&accel_snowball_mode>; + interrupt-parent = <&gpio5>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */ + <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */ }; - lsm303dlm@1e { + lsm303dlh@1e { /* Magnetometer */ - compatible = "st,lsm303dlm-magn"; + compatible = "st,lsm303dlh-magn"; reg = <0x1e>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&magneto_snowball_mode>; + gpios = <&gpio5 5 0x4>; /* DRDY line */ }; l3g4200d@68 { /* Gyroscope */ @@ -279,6 +283,11 @@ reg = <0x68>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gyro_snowball_mode>; + gpios = <&gpio5 6 0x4>; /* DRDY line */ + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */ }; lsp001wm@5c { /* Barometer/pressure sensor */ @@ -489,6 +498,16 @@ }; }; }; + gyro { + gyro_snowball_mode: gyro_snowball { + snowball_cfg1 { + pins = + "GPIO166_A22", /* DRDY */ + "GPIO169_D22"; /* INT */ + ste,config = <&gpio_in_pu>; + }; + }; + }; magnetometer { magneto_snowball_mode: magneto_snowball { snowball_cfg1 { diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts index af487145cd89..6d93475be554 100644 --- a/arch/arm/boot/dts/stih407-b2120.dts +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -7,8 +7,8 @@ * published by the Free Software Foundation. */ /dts-v1/; -#include "stihxxx-b2120.dtsi" #include "stih407.dtsi" +#include "stihxxx-b2120.dtsi" / { model = "STiH407 B2120"; compatible = "st,stih407-b2120", "st,stih407"; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index c06a54681912..838b812cbda1 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -7,7 +7,10 @@ * publishhed by the Free Software Foundation. */ #include "stih407-pinctrl.dtsi" +#include <dt-bindings/mfd/st-lpc.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/reset-controller/stih407-resets.h> +#include <dt-bindings/interrupt-controller/irq-st.h> / { #address-cells = <1>; #size-cells = <1>; @@ -56,6 +59,12 @@ cache-level = <2>; }; + arm-pmu { + interrupt-parent = <&intc>; + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -63,6 +72,12 @@ ranges; compatible = "simple-bus"; + restart { + compatible = "st,stih407-restart"; + st,syscfg = <&syscfg_sbc_reg>; + status = "okay"; + }; + powerdown: powerdown-controller { compatible = "st,stih407-powerdown"; #reset-cells = <1>; @@ -113,6 +128,15 @@ reg = <0x94b5100 0x1000>; }; + irq-syscfg { + compatible = "st,stih407-irq-syscfg"; + st,syscfg = <&syscfg_core>; + st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, + <ST_IRQ_SYSCFG_PMU_1>; + st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, + <ST_IRQ_SYSCFG_DISABLED>; + }; + serial@9830000 { compatible = "st,asc"; reg = <0x9830000 0x2c>; @@ -280,7 +304,7 @@ #phy-cells = <0>; st,syscfg = <&syscfg_core 0x100 0xf4>; resets = <&softreset STIH407_PICOPHY_SOFTRESET>, - <&picophyreset STIH407_PICOPHY0_RESET>; + <&picophyreset STIH407_PICOPHY2_RESET>; reset-names = "global", "port"; }; @@ -336,5 +360,210 @@ resets = <&softreset STIH407_MIPHY2_SOFTRESET>; }; }; + + spi@9840000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9840000 0x110>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + pinctrl-0 = <&pinctrl_spi0_default>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi@9841000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9841000 0x110>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9842000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9842000 0x110>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9843000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9843000 0x110>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9844000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9844000 0x110>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + + status = "disabled"; + }; + + /* SBC SSC */ + spi@9540000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9540000 0x110>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9541000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9541000 0x110>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9542000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9542000 0x110>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; + + mmc0: sdhci@09060000 { + compatible = "st,sdhci-stih407", "st,sdhci"; + status = "disabled"; + reg = <0x09060000 0x7ff>, <0x9061008 0x20>; + reg-names = "mmc", "top-mmc-delay"; + interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0>; + clock-names = "mmc"; + clocks = <&clk_s_c0_flexgen CLK_MMC_0>; + bus-width = <8>; + non-removable; + }; + + mmc1: sdhci@09080000 { + compatible = "st,sdhci-stih407", "st,sdhci"; + status = "disabled"; + reg = <0x09080000 0x7ff>; + reg-names = "mmc"; + interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1>; + clock-names = "mmc"; + clocks = <&clk_s_c0_flexgen CLK_MMC_1>; + resets = <&softreset STIH407_MMC1_SOFTRESET>; + bus-width = <4>; + }; + + /* Watchdog and Real-Time Clock */ + lpc@8787000 { + compatible = "st,stih407-lpc"; + reg = <0x8787000 0x1000>; + interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + timeout-sec = <120>; + st,syscfg = <&syscfg_core>; + st,lpc-mode = <ST_LPC_MODE_WDT>; + }; + + lpc@8788000 { + compatible = "st,stih407-lpc"; + reg = <0x8788000 0x1000>; + interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>; + clocks = <&clk_s_d3_flexgen CLK_LPC_1>; + st,lpc-mode = <ST_LPC_MODE_RTC>; + }; + + sata0: sata@9b20000 { + compatible = "st,ahci"; + reg = <0x9b20000 0x1000>; + + interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>; + interrupt-names = "hostc"; + + phys = <&phy_port0 PHY_TYPE_SATA>; + phy-names = "ahci_phy"; + + resets = <&powerdown STIH407_SATA0_POWERDOWN>, + <&softreset STIH407_SATA0_SOFTRESET>, + <&softreset STIH407_SATA0_PWR_SOFTRESET>; + reset-names = "pwr-dwn", "sw-rst", "pwr-rst"; + + clock-names = "ahci_clk"; + clocks = <&clk_s_c0_flexgen CLK_ICN_REG>; + + status = "disabled"; + }; + + sata1: sata@9b28000 { + compatible = "st,ahci"; + reg = <0x9b28000 0x1000>; + + interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>; + interrupt-names = "hostc"; + + phys = <&phy_port1 PHY_TYPE_SATA>; + phy-names = "ahci_phy"; + + resets = <&powerdown STIH407_SATA1_POWERDOWN>, + <&softreset STIH407_SATA1_SOFTRESET>, + <&softreset STIH407_SATA1_PWR_SOFTRESET>; + reset-names = "pwr-dwn", + "sw-rst", + "pwr-rst"; + + clock-names = "ahci_clk"; + clocks = <&clk_s_c0_flexgen CLK_ICN_REG>; + + status = "disabled"; + }; + + st_dwc3: dwc3@8f94000 { + compatible = "st,stih407-dwc3"; + reg = <0x08f94000 0x1000>, <0x110 0x4>; + reg-names = "reg-glue", "syscfg-reg"; + st,syscfg = <&syscfg_core>; + resets = <&powerdown STIH407_USB3_POWERDOWN>, + <&softreset STIH407_MIPHY2_SOFTRESET>; + reset-names = "powerdown", "softreset"; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3>; + ranges; + + status = "disabled"; + + dwc3: dwc3@9900000 { + compatible = "snps,dwc3"; + reg = <0x09900000 0x100000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>; + dr_mode = "host"; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2_picophy0>, + <&phy_port2 PHY_TYPE_USB3>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 402844cb3152..0a754f275212 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -104,6 +104,7 @@ #interrupt-cells = <2>; reg = <0x5000 0x100>; st,bank-name = "PIO5"; + st,retime-pin-mask = <0x3f>; }; rc { @@ -519,6 +520,7 @@ #interrupt-cells = <2>; reg = <0x5000 0x100>; st,bank-name = "PIO35"; + st,retime-pin-mask = <0x7f>; }; i2c4 { diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 3efa3b2ebe90..2c560fc30503 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -147,5 +147,33 @@ }; }; }; + + /* COMMS PWM Module */ + pwm0: pwm@9810000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0x9810000 0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_chan0_default>; + clock-names = "pwm"; + clocks = <&clk_sysin>; + }; + + /* SBC PWM Module */ + pwm1: pwm@9510000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0x9510000 0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_chan0_default + &pinctrl_pwm1_chan1_default + &pinctrl_pwm1_chan2_default + &pinctrl_pwm1_chan3_default>; + clock-names = "pwm"; + clocks = <&clk_sysin>; + st,pwm-num-chan = <4>; + }; }; }; diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 2f61a9960dee..16f02c5e33a4 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -26,4 +26,14 @@ aliases { ttyAS0 = &sbc_serial0; }; + + soc { + + mmc0: sdhci@09060000 { + max-frequency = <200000000>; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; + }; + }; }; diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts index 961799e1dc51..f1ceee192a0e 100644 --- a/arch/arm/boot/dts/stih416-b2020e.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts @@ -51,5 +51,15 @@ sata0: sata@fe380000{ status = "okay"; }; + + /* SAS PWM Module */ + pwm0: pwm@fed10000 { + status = "okay"; + }; + + /* SBC PWM Module */ + pwm1: pwm@fe510000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index 9cccf2d6aa26..051fc16f3706 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -216,6 +216,29 @@ }; }; }; + + pwm1 { + pinctrl_pwm1_chan0_default: pwm1-0-default { + st,pins { + pwm-out = <&pio3 0 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan1_default: pwm1-1-default { + st,pins { + pwm-out = <&pio4 4 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan2_default: pwm1-2-default { + st,pins { + pwm-out = <&pio4 6 ALT3 OUT>; + }; + }; + pinctrl_pwm1_chan3_default: pwm1-3-default { + st,pins { + pwm-out = <&pio4 7 ALT3 OUT>; + }; + }; + }; }; pin-controller-front { @@ -310,6 +333,14 @@ st,bank-name = "PIO31"; }; + pwm0 { + pinctrl_pwm0_chan0_default: pwm0-0-default { + st,pins { + pwm-out = <&pio9 7 ALT2 OUT>; + }; + }; + }; + serial2-oe { pinctrl_serial2_oe: serial2-1 { st,pins { @@ -540,6 +571,25 @@ }; }; }; + + pwm0 { + pinctrl_pwm0_chan1_default: pwm0-1-default { + st,pins { + pwm-out = <&pio13 2 ALT2 OUT>; + }; + }; + pinctrl_pwm0_chan2_default: pwm0-2-default { + st,pins { + pwm-out = <&pio15 2 ALT4 OUT>; + }; + }; + pinctrl_pwm0_chan3_default: pwm0-3-default { + st,pins { + pwm-out = <&pio17 4 ALT1 OUT>; + }; + }; + }; + }; pin-controller-fvdp-fe { diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index eeb7afecbbe6..9dca173e694a 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset-controller/stih416-resets.h> +#include <dt-bindings/interrupt-controller/irq-st.h> / { L2: cache-controller { compatible = "arm,pl310-cache"; @@ -23,6 +24,12 @@ cache-level = <2>; }; + arm-pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -30,6 +37,12 @@ ranges; compatible = "simple-bus"; + restart { + compatible = "st,stih416-restart"; + st,syscfg = <&syscfg_sbc>; + status = "okay"; + }; + powerdown: powerdown-controller { #reset-cells = <1>; compatible = "st,stih416-powerdown"; @@ -86,6 +99,15 @@ reg = <0xfe4b5100 0x8>; }; + irq-syscfg { + compatible = "st,stih416-irq-syscfg"; + st,syscfg = <&syscfg_cpu>; + st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, + <ST_IRQ_SYSCFG_PMU_1>; + st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, + <ST_IRQ_SYSCFG_DISABLED>; + }; + serial2: serial@fed32000{ compatible = "st,asc"; status = "disabled"; @@ -104,7 +126,7 @@ interrupts = <0 210 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; - clocks = <&clk_sysin>; + clocks = <&clk_sysin>; }; i2c@fed40000 { @@ -445,5 +467,47 @@ <&softreset STIH416_USB3_SOFTRESET>; reset-names = "power", "softreset"; }; + + /* SAS PWM Module */ + pwm0: pwm@fed10000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0xfed10000 0x68>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_chan0_default + &pinctrl_pwm0_chan1_default + &pinctrl_pwm0_chan2_default + &pinctrl_pwm0_chan3_default>; + + clock-names = "pwm"; + clocks = <&clk_sysin>; + st,pwm-num-chan = <4>; + }; + + /* SBC PWM Module */ + pwm1: pwm@fe510000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0xfe510000 0x68>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_chan0_default + /* + * Shared with SBC_OBS_NOTRST. Don't + * enable unless you really know what + * you're doing. + * + * &pinctrl_pwm1_chan1_default + */ + &pinctrl_pwm1_chan2_default + &pinctrl_pwm1_chan3_default>; + + clock-names = "pwm"; + clocks = <&clk_sysin>; + st,pwm-num-chan = <3>; + }; }; }; diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index 926235c08e4d..82eee39ccb31 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -74,5 +74,32 @@ st,i2c-min-scl-pulse-width-us = <0>; st,i2c-min-sda-pulse-width-us = <5>; }; + + mmc1: sdhci@09080000 { + status = "okay"; + }; + + mmc0: sdhci@09060000 { + status = "okay"; + max-frequency = <200000000>; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; + }; + + miphy28lp_phy: miphy28lp@9b22000 { + + phy_port0: port@9b22000 { + st,osc-rdy; + }; + + phy_port1: port@9b2a000 { + st,osc-force-ext; + }; + }; + + st_dwc3: dwc3@8f94000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index c1d859092be7..f589fe487f13 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -47,6 +47,14 @@ status = "okay"; }; + mmc0: sdhci@09060000 { + status = "okay"; + }; + + mmc1: sdhci@09080000 { + status = "okay"; + }; + /* SSC11 to HDMI */ hdmiddc: i2c@9541000 { status = "okay"; @@ -66,5 +74,10 @@ st,osc-force-ext; }; }; + + st_dwc3: dwc3@8f94000 { + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts new file mode 100644 index 000000000000..6b9aa59d978a --- /dev/null +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -0,0 +1,71 @@ +/* + * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f429.dtsi" + +/ { + model = "STMicroelectronics STM32F429i-DISCO board"; + compatible = "st,stm32f429i-disco", "st,stm32f429"; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/ram rdinit=/linuxrc"; + linux,stdout-path = &usart1; + }; + + memory { + reg = <0x90000000 0x800000>; + }; + + aliases { + serial0 = &usart1; + }; +}; + +&usart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi new file mode 100644 index 000000000000..aa73b4f4172c --- /dev/null +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -0,0 +1,214 @@ +/* + * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armv7-m.dtsi" + +/ { + clocks { + clk_sysclk: clk-sysclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <180000000>; + }; + + clk_hclk: clk-hclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <180000000>; + }; + + clk_pclk1: clk-pclk1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <45000000>; + }; + + clk_pclk2: clk-pclk2 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <90000000>; + }; + + clk_pmtr1: clk-pmtr1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <90000000>; + }; + + clk_pmtr2: clk-pmtr2 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <180000000>; + }; + + clk_systick: clk-systick { + compatible = "fixed-factor-clock"; + clocks = <&clk_hclk>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + }; + }; + + soc { + timer2: timer@40000000 { + compatible = "st,stm32-timer"; + reg = <0x40000000 0x400>; + interrupts = <28>; + clocks = <&clk_pmtr1>; + status = "disabled"; + }; + + timer3: timer@40000400 { + compatible = "st,stm32-timer"; + reg = <0x40000400 0x400>; + interrupts = <29>; + clocks = <&clk_pmtr1>; + status = "disabled"; + }; + + timer4: timer@40000800 { + compatible = "st,stm32-timer"; + reg = <0x40000800 0x400>; + interrupts = <30>; + clocks = <&clk_pmtr1>; + status = "disabled"; + }; + + timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + clocks = <&clk_pmtr1>; + }; + + timer6: timer@40001000 { + compatible = "st,stm32-timer"; + reg = <0x40001000 0x400>; + interrupts = <54>; + clocks = <&clk_pmtr1>; + status = "disabled"; + }; + + timer7: timer@40001400 { + compatible = "st,stm32-timer"; + reg = <0x40001400 0x400>; + interrupts = <55>; + clocks = <&clk_pmtr1>; + status = "disabled"; + }; + + usart2: serial@40004400 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40004400 0x400>; + interrupts = <38>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart3: serial@40004800 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40004800 0x400>; + interrupts = <39>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart4: serial@40004c00 { + compatible = "st,stm32-uart"; + reg = <0x40004c00 0x400>; + interrupts = <52>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart5: serial@40005000 { + compatible = "st,stm32-uart"; + reg = <0x40005000 0x400>; + interrupts = <53>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart7: serial@40007800 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40007800 0x400>; + interrupts = <82>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart8: serial@40007c00 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40007c00 0x400>; + interrupts = <83>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart1: serial@40011000 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40011000 0x400>; + interrupts = <37>; + clocks = <&clk_pclk2>; + status = "disabled"; + }; + + usart6: serial@40011400 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40011400 0x400>; + interrupts = <71>; + clocks = <&clk_pclk2>; + status = "disabled"; + }; + }; +}; + +&systick { + clocks = <&clk_systick>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index b67e5be618cf..2630d78d9e04 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,101 +53,12 @@ model = "Mele A1000"; compatible = "mele,a1000", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - mdio@01c0b080 { - phy-supply = <®_emac_3v3>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - emac_power_pin_a1000: emac_power_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - led_pins_a1000: led_pins@0 { - allwinner,pins = "PH10", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; + aliases { + serial0 = &uart0; + }; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -181,12 +87,111 @@ enable-active-high; gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; }; +}; + +&ahci { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mdio { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + emac_power_pin_a1000: emac_power_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + led_pins_a1000: led_pins@0 { + allwinner,pins = "PH10", "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 490b77c9bb36..93d435670ef1 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -55,94 +50,104 @@ model = "BA10 tvbox"; compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - mdio@01c0b080 { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - usb2_vbus_pin_a: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; - reg_usb1_vbus: usb1-vbus { - status = "okay"; + interrupt-controller; + #interrupt-cells = <1>; }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mdio { + status = "okay"; - reg_usb2_vbus: usb2-vbus { - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; - status = "okay"; + phy1: ethernet-phy@1 { + reg = <1>; }; }; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + usb2_vbus_pin_a: usb2_vbus_pin@0 { + allwinner,pins = "PH12"; + }; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 58214f249598..5878a0b11f7b 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -49,10 +44,19 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Chuwi V7 CW0825"; compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci1 { @@ -74,6 +78,32 @@ }; }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@800 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <800000>; + }; + + button@1000 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <1000000>; + }; + + button@1200 { + label = "Back"; + linux,code = <KEY_BACK>; + channel = <0>; + voltage = <1200000>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 4260c2b47607..9afb4e018593 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -57,102 +52,12 @@ model = "Cubietech Cubieboard"; compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - mdio@01c0b080 { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - led_pins_cubieboard: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + aliases { + serial0 = &uart0; + }; - spi0: spi@01c05000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -171,26 +76,100 @@ linux,default-trigger = "heartbeat"; }; }; +}; - reg_ahci_5v: ahci-5v { - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; }; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mdio { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; }; }; -#include "axp209.dtsi" +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; -&cpu0 { - cpu-supply = <®_dcdc2>; +&ohci0 { + status = "okay"; }; +&ohci1 { + status = "okay"; +}; + +&pio { + led_pins_cubieboard: led_pins@0 { + allwinner,pins = "PH20", "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_ahci_5v { + status = "okay"; +}; + +#include "axp209.dtsi" + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -215,3 +194,30 @@ regulator-max-microvolt = <3000000>; regulator-name = "avcc"; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts new file mode 100644 index 000000000000..570754d8df67 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -0,0 +1,171 @@ +/* + * Copyright 2015 Priit Laes + * + * Priit Laes <plaes@plaes.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Gemei G9 Tablet"; + compatible = "gemei,g9", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +/* + * TODO: + * 2x cameras via CSI + * bma250 IRQs + * AXP battery management + * NAND + * OTG + * Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48 + */ + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + /* Accelerometer */ + bma250@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + + /* + * TODO: interrupt pins: + * int1 - PH00 + * int2 - PI10 + */ + }; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + + status = "okay"; + + button@158 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <158730>; + }; + + button@349 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <349206>; + }; + + button@1142 { + label = "Esc"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1142856>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */ + cd-inverted; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index d3f73ea25567..2b17c5199151 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,100 +53,12 @@ model = "Miniand Hackberry"; compatible = "miniand,hackberry", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy0>; - status = "okay"; - }; - - mdio@01c0b080 { - phy-supply = <®_emac_3v3>; - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pio: pinctrl@01c20800 { - pinctrl-names = "default"; - pinctrl-0 = <&hackberry_hogs>; - - hackberry_hogs: hogs@0 { - allwinner,pins = "PH19"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; reg_emac_3v3: emac-3v3 { @@ -162,14 +69,97 @@ enable-active-high; gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy0>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mdio { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; }; +}; - reg_usb2_vbus: usb2-vbus { - pinctrl-0 = <&usb2_vbus_pin_hackberry>; - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; - status = "okay"; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&hackberry_hogs>; + + hackberry_hogs: hogs@0 { + allwinner,pins = "PH19"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + pinctrl-0 = <&usb2_vbus_pin_hackberry>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index c88382aacc36..43f58fbe161c 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -53,6 +48,14 @@ / { model = "Hyundai A7HD"; compatible = "hyundai,a7hd", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci1 { diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 482914333bba..6c927a824ba2 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -61,66 +56,68 @@ serial0 = &uart0; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; }; }; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts new file mode 100644 index 000000000000..dc2f2aeaff07 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -0,0 +1,193 @@ +/* + * Copyright 2015 Gábor Nyers + * + * Gábor Nyers <gabor.nyers@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Jesurun Q5"; + compatible = "jesurun,q5", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_q5>; + + green { + label = "q5:green:usr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */ + }; + + }; + + reg_emac_3v3: emac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&emac_power_pin_q5>; + regulator-name = "emac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ + }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mdio { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + emac_power_pin_q5: emac_power_pin@0 { + allwinner,pins = "PH19"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_q5: led_pins@0 { + allwinner,pins = "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 9ee86a700c2b..02158bcd64ee 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -57,6 +52,14 @@ model = "HAOYU Electronics Marsboard A10"; compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -96,6 +99,10 @@ status = "okay"; }; +&emac_sram { + status = "okay"; +}; + &emac { pinctrl-names = "default"; pinctrl-0 = <&emac_pins_a>; @@ -166,7 +173,8 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index eb5fd6904a69..ebe2a04ef649 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,79 +53,83 @@ model = "PineRiver Mini X-Plus"; compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - ir0_pins_a: ir0@0 { - /* The ir receiver is not always populated */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + aliases { + serial0 = &uart0; }; - reg_usb1_vbus: usb1-vbus { - status = "okay"; + chosen { + stdout-path = "serial0:115200n8"; }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; }; }; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&ir0_rx_pins_a { + /* The ir receiver is not always populated */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index e9a6886f0d51..3c7eebe17088 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -53,6 +48,14 @@ / { model = "MK802"; compatible = "allwinner,mk802", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci0 { diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts index 802eda494d1c..c861fa7e356c 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -53,6 +48,14 @@ / { model = "MK802ii"; compatible = "allwinner,mk802ii", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci0 { diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 75742f8f96f3..b64aa4eb071e 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -56,136 +51,143 @@ model = "Olimex A10-OLinuXino-LIME"; compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; - cpus { - cpu0: cpu@0 { - /* - * The A10-Lime is known to be unstable - * when running at 1008 MHz - */ - operating-points = < - /* kHz uV */ - 912000 1350000 - 864000 1300000 - 624000 1250000 - >; - cooling-max-level = <2>; - }; + aliases { + serial0 = &uart0; }; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - mdio@01c0b080 { - status = "okay"; + chosen { + stdout-path = "serial0:115200n8"; + }; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; + green { + label = "a10-olinuxino-lime:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&cpu0 { + /* + * The A10-Lime is known to be unstable when running at 1008 MHz + */ + operating-points = < + /* kHz uV */ + 912000 1350000 + 864000 1300000 + 624000 1250000 + >; + cooling-max-level = <2>; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&emac_sram { + status = "okay"; +}; - pinctrl@01c20800 { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; +&mdio { + status = "okay"; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + phy1: ethernet-phy@1 { + reg = <1>; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxinolime>; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - green { - label = "a10-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; +&ohci0 { + status = "okay"; +}; - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; +&ohci1 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&pio { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 9d1e5482cf82..4e3e1b9d8217 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,90 +53,12 @@ model = "LinkSprite pcDuino"; compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - pinctrl@01c20800 { - led_pins_pcduino: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - key_pins_pcduino: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - mdio@01c0b080 { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; + aliases { + serial0 = &uart0; + }; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -185,12 +102,100 @@ gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; }; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&mdio { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + led_pins_pcduino: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + key_pins_pcduino: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index eebb7853e00b..61c03d1fe530 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -2,12 +2,43 @@ * Copyright 2012 Stefan Roese * Stefan Roese <sr@denx.de> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" @@ -30,7 +61,8 @@ ranges; framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; @@ -38,7 +70,8 @@ }; framebuffer@1 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>, <&ahb_gates 46>; @@ -74,11 +107,11 @@ clocks = <&cpu>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < - /* kHz uV */ + /* kHz uV */ 1008000 1400000 - 912000 1350000 - 864000 1300000 - 624000 1250000 + 912000 1350000 + 864000 1300000 + 624000 1250000 >; #cooling-cells = <2>; cooling-min-level = <0>; @@ -398,11 +431,12 @@ usb_clk: clk@01c200cc { #clock-cells = <1>; - #reset-cells = <1>; + #reset-cells = <1>; compatible = "allwinner,sun4i-a10-usb-clk"; reg = <0x01c200cc 0x4>; clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; + clock-output-names = "usb_ohci0", "usb_ohci1", + "usb_phy"; }; spi3_clk: clk@01c200d4 { @@ -420,6 +454,42 @@ #size-cells = <1>; ranges; + sram-controller@01c00000 { + compatible = "allwinner,sun4i-a10-sram-controller"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_a: sram@00000000 { + compatible = "mmio-sram"; + reg = <0x00000000 0xc000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0xc000>; + + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; + }; + + sram_d: sram@00010000 { + compatible = "mmio-sram"; + reg = <0x00010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00010000 0x1000>; + + otg_sram: sram-section@0000 { + compatible = "allwinner,sun4i-a10-sram-d"; + reg = <0x0000 0x1000>; + status = "disabled"; + }; + }; + }; + dma: dma-controller@01c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; @@ -461,6 +531,7 @@ reg = <0x01c0b000 0x1000>; interrupts = <55>; clocks = <&ahb_gates 17>; + allwinner,sram = <&emac_sram 1>; status = "disabled"; }; @@ -485,6 +556,8 @@ "sample"; interrupts = <32>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -500,6 +573,8 @@ "sample"; interrupts = <33>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -515,6 +590,8 @@ "sample"; interrupts = <34>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc3: mmc@01c12000 { @@ -530,6 +607,8 @@ "sample"; interrupts = <35>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; usbphy: phy@01c13400 { @@ -706,7 +785,8 @@ }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; allwinner,function = "mmc0"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; @@ -719,43 +799,85 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - ir0_pins_a: ir0@0 { - allwinner,pins = "PB3","PB4"; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; allwinner,function = "ir0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_pins_a: ir1@0 { - allwinner,pins = "PB22","PB23"; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; allwinner,function = "ir1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi0_pins_a: spi0@0 { - allwinner,pins = "PI10", "PI11", "PI12", "PI13"; + allwinner,pins = "PI11", "PI12", "PI13"; + allwinner,function = "spi0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi0_cs0_pins_a: spi0_cs0@0 { + allwinner,pins = "PI10"; allwinner,function = "spi0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi1_pins_a: spi1@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,pins = "PI17", "PI18", "PI19"; + allwinner,function = "spi1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi1_cs0_pins_a: spi1_cs0@0 { + allwinner,pins = "PI16"; allwinner,function = "spi1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PB14", "PB15", "PB16", "PB17"; + allwinner,pins = "PC20", "PC21", "PC22"; allwinner,function = "spi2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PC19", "PC20", "PC21", "PC22"; + allwinner,pins = "PB15", "PB16", "PB17"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_cs0_pins_a: spi2_cs0@0 { + allwinner,pins = "PC19"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_cs0_pins_b: spi2_cs0@1 { + allwinner,pins = "PB14"; allwinner,function = "spi2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts new file mode 100644 index 000000000000..2b3511ea2e5d --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -0,0 +1,154 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Auxtek t004 A10s hdmi tv-stick"; + compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_t004>; + + red { + label = "t004-tv-dongle:red:usr"; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ + default-state = "on"; + }; + }; + + reg_vmmc1: vmmc1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_vcc_en_pin_t004>; + regulator-name = "vmmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vmmc1>; + bus-width = <4>; + non-removable; + cap-sdio-irq; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_t004: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 { + allwinner,pins = "PB18"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_t004: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PG13"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts index b21af87d9eae..46ff9407826d 100644 --- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -54,6 +49,14 @@ model = "MK802-A10s"; compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 2bbc93b935ca..a7e19e4847f7 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -65,184 +60,191 @@ serial2 = &uart3; }; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - mdio@01c0b080 { - status = "okay"; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; - phy1: ethernet-phy@1 { - reg = <1>; - }; + green { + label = "a10s-olinuxino-micro:green:usr"; + gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - mmc1: mmc@01c10000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ - cd-inverted; - status = "okay"; - }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; +&emac_sram { + status = "okay"; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; - pinctrl@01c20800 { - mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PE3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; + at24@50 { + compatible = "at,24c16"; + pagesize = <16>; + reg = <0x50>; + read-only; + }; +}; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@191 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <191274>; - }; - - button@392 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <392644>; - }; - - button@601 { - label = "Menu"; - linux,code = <KEY_MENU>; - channel = <0>; - voltage = <601151>; - }; - - button@795 { - label = "Enter"; - linux,code = <KEY_ENTER>; - channel = <0>; - voltage = <795090>; - }; - - button@987 { - label = "Home"; - linux,code = <KEY_HOMEPAGE>; - channel = <0>; - voltage = <987387>; - }; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - uart2: serial@01c28800 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; - status = "okay"; - }; + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; - uart3: serial@01c28c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; - status = "okay"; - }; + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - at24@50 { - compatible = "at,24c16"; - pagesize = <16>; - reg = <0x50>; - read-only; - }; - }; + button@795 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <795090>; + }; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxino>; +&mdio { + status = "okay"; - green { - label = "a10s-olinuxino-micro:green:usr"; - gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; + phy1: ethernet-phy@1 { + reg = <1>; }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>; - gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; - status = "okay"; +&pio { + mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { + allwinner,pins = "PG13"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PE3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { + allwinner,pins = "PB10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>; + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; + status = "okay"; }; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 7deddfc9df8b..3b057983c74a 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -56,67 +51,12 @@ model = "R7 A10s hdmi tv-stick"; compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; - status = "okay"; - }; - - mmc1: mmc@01c10000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - non-removable; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc0_cd_pin_r7: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - led_pins_r7: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb1_vbus_pin_r7: usb1_vbus_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; + aliases { + serial0 = &uart0; + }; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -130,10 +70,71 @@ default-state = "on"; }; }; +}; + +&ehci0 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_r7>; - gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; - status = "okay"; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_r7: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + led_pins_r7: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb1_vbus_pin_r7: usb1_vbus_pin@0 { + allwinner,pins = "PG13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_r7>; + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 2fd8988f310c..f11efb722bbb 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -3,16 +3,49 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" +#include "sun5i.dtsi" + #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -29,7 +62,8 @@ ranges; framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; @@ -45,133 +79,23 @@ }; }; - cpus { - cpu@0 { - compatible = "arm,cortex-a8"; - }; - }; - - memory { - reg = <0x40000000 0x20000000>; - }; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-axi-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-output-names = "axi_dram"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>; - clock-output-names = "ahb"; - }; - ahb_gates: clk@01c20060 { #clock-cells = <1>; compatible = "allwinner,sun5i-a10s-ahb-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb>; - clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci", - "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", - "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram", - "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1", - "ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve", - "ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi", - "ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400"; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; + clock-output-names = "ahb_usbotg", "ahb_ehci", + "ahb_ohci", "ahb_ss", "ahb_dma", + "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_nand", + "ahb_sdram", "ahb_emac", "ahb_ts", + "ahb_spi0", "ahb_spi1", "ahb_spi2", + "ahb_gps", "ahb_stimer", "ahb_ve", + "ahb_tve", "ahb_lcd", "ahb_csi", + "ahb_hdmi", "ahb_de_be", + "ahb_de_fe", "ahb_iep", + "ahb_mali400"; }; apb0_gates: clk@01c20068 { @@ -179,16 +103,9 @@ compatible = "allwinner,sun5i-a10s-apb0-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb0>; - clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio", - "apb0_ir", "apb0_keypad"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; + clock-output-names = "apb0_codec", "apb0_iis", + "apb0_pio", "apb0_ir", + "apb0_keypad"; }; apb1_gates: clk@01c2006c { @@ -200,166 +117,15 @@ "apb1_i2c2", "apb1_uart0", "apb1_uart1", "apb1_uart2", "apb1_uart3"; }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_phy"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mbus"; - }; }; soc@01c00000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun4i-a10-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <27>; - clocks = <&ahb_gates 6>; - #dma-cells = <2>; - }; - - spi0: spi@01c05000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c05000 0x1000>; - interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 27>, - <&dma SUN4I_DMA_DEDICATED 26>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@01c06000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 9>, - <&dma SUN4I_DMA_DEDICATED 8>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - emac: ethernet@01c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; clocks = <&ahb_gates 17>; + allwinner,sram = <&emac_sram 1>; status = "disabled"; }; @@ -371,214 +137,6 @@ #size-cells = <0>; }; - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <32>; - status = "disabled"; - }; - - mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <33>; - status = "disabled"; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <34>; - status = "disabled"; - }; - - usbphy: phy@01c13400 { - #phy-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; - reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>; - clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>; - reset-names = "usb0_reset", "usb1_reset"; - status = "disabled"; - }; - - ehci0: usb@01c14000 { - compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci"; - reg = <0x01c14000 0x100>; - interrupts = <39>; - clocks = <&ahb_gates 1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci0: usb@01c14400 { - compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci"; - reg = <0x01c14400 0x100>; - interrupts = <40>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - spi2: spi@01c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; - interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 29>, - <&dma SUN4I_DMA_DEDICATED 28>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-a10-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - pio: pinctrl@01c20800 { - compatible = "allwinner,sun5i-a10s-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <28>; - clocks = <&apb0_gates 5>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - #size-cells = <0>; - #gpio-cells = <3>; - - uart0_pins_a: uart0@0 { - allwinner,pins = "PB19", "PB20"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - uart2_pins_a: uart2@0 { - allwinner,pins = "PC18", "PC19"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - uart3_pins_a: uart3@0 { - allwinner,pins = "PG9", "PG10"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0x90>; - interrupts = <22>; - clocks = <&osc24M>; - }; - - wdt: watchdog@01c20c90 { - compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; - - lradc: lradc@01c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = <31>; - status = "disabled"; - }; - - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10>; - }; - - rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-a10-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - #thermal-sensor-cells = <0>; - }; - uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -589,16 +147,6 @@ status = "disabled"; }; - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <2>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 17>; - status = "disabled"; - }; - uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; @@ -608,52 +156,57 @@ clocks = <&apb1_gates 18>; status = "disabled"; }; + }; +}; - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = <4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 19>; - status = "disabled"; - }; +&pio { + compatible = "allwinner,sun5i-a10s-pinctrl"; - i2c0: i2c@01c2ac00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <7>; - clocks = <&apb1_gates 0>; - status = "disabled"; - }; + uart0_pins_a: uart0@0 { + allwinner,pins = "PB19", "PB20"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - i2c1: i2c@01c2b000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <8>; - clocks = <&apb1_gates 1>; - status = "disabled"; - }; + uart2_pins_a: uart2@0 { + allwinner,pins = "PC18", "PC19"; + allwinner,function = "uart2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - i2c2: i2c@01c2b400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b400 0x400>; - interrupts = <9>; - clocks = <&apb1_gates 2>; - status = "disabled"; - }; + uart3_pins_a: uart3@0 { + allwinner,pins = "PG9", "PG10"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - timer@01c60000 { - compatible = "allwinner,sun5i-a13-hstimer"; - reg = <0x01c60000 0x1000>; - interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; - }; + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG3", "PG4", "PG5", + "PG6", "PG7", "PG8"; + allwinner,function = "mmc1"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&sram_a { + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 03aa04555630..990f9d61ae4d 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -60,81 +55,72 @@ serial0 = &uart1; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_ldo3>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc0_cd_pin_h702: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - }; - - uart1: serial@01c28400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; }; }; -#include "axp209.dtsi" - &cpu0 { cpu-supply = <®_dcdc2>; }; +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_h702: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +#include "axp209.dtsi" + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -165,3 +151,14 @@ regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi"; }; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 03deb84268ce..ad84fe4276c9 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -61,76 +56,8 @@ serial0 = &uart1; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - led_pins_olinuxinom: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - uart1: serial@01c28400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -144,10 +71,80 @@ default-state = "on"; }; }; +}; + +&ehci0 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; - gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; - status = "okay"; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + led_pins_olinuxinom: led_pins@0 { + allwinner,pins = "PG9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { + allwinner,pins = "PG11"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 6b24876ed462..42324005eb7c 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -63,141 +58,143 @@ serial0 = &uart1; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; - ehci0: usb@01c14000 { - status = "okay"; + power { + gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - pinctrl@01c20800 { - mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@191 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <191274>; - }; - - button@392 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <392644>; - }; - - button@601 { - label = "Menu"; - linux,code = <KEY_MENU>; - channel = <0>; - voltage = <601151>; - }; - - button@795 { - label = "Enter"; - linux,code = <KEY_ENTER>; - channel = <0>; - voltage = <795090>; - }; - - button@987 { - label = "Home"; - linux,code = <KEY_HOMEPAGE>; - channel = <0>; - voltage = <987387>; - }; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; - uart1: serial@01c28400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxino>; + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; - power { - gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; + button@795 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <795090>; + }; + + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PG9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxino>; - gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; - status = "okay"; + usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { + allwinner,pins = "PG11"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_olinuxino>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts new file mode 100644 index 000000000000..514f159a14d4 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -0,0 +1,226 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Utoo P66"; + compatible = "utoo,p66", "allwinner,sun5i-a13"; + + i2c_lcd: i2c@0 { + /* The lcd panel i2c interface is hooked up via gpios */ + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_lcd_pins>; + gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */ + <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */ + i2c-gpio,delay-us = <5>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + icn8318: touchscreen@40 { + compatible = "chipone,icn8318"; + reg = <0x40>; + interrupt-parent = <&pio>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_wake_pin_p66>; + wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; + + mmccard: mmccard@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; + +&pio { + mmc0_cd_pin_p66: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + i2c_lcd_pins: i2c_lcd_pin@0 { + allwinner,pins = "PG10", "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + ts_wake_pin_p66: ts_wake_pin@0 { + allwinner,pins = "PB3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb0_vbus { + gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 883cb4873688..976d4faa2179 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -3,20 +3,51 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" -#include <dt-bindings/thermal/thermal.h> +#include "sun5i.dtsi" -#include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -35,31 +66,6 @@ }; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a8"; - reg = <0x0>; - clocks = <&cpu>; - clock-latency = <244144>; /* 8 32k periods */ - operating-points = < - /* kHz uV */ - 1008000 1400000 - 912000 1350000 - 864000 1300000 - 624000 1200000 - 576000 1200000 - 432000 1200000 - >; - #cooling-cells = <2>; - cooling-min-level = <0>; - cooling-max-level = <5>; - }; - }; - thermal-zones { cpu_thermal { /* milliseconds */ @@ -92,126 +98,22 @@ }; }; - memory { - reg = <0x40000000 0x20000000>; - }; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-axi-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-output-names = "axi_dram"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>; - clock-output-names = "ahb"; - }; - ahb_gates: clk@01c20060 { #clock-cells = <1>; compatible = "allwinner,sun5i-a13-ahb-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb>; - clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci", - "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", - "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram", - "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer", - "ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be", - "ahb_de_fe", "ahb_iep", "ahb_mali400"; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; + clock-output-names = "ahb_usbotg", "ahb_ehci", + "ahb_ohci", "ahb_ss", "ahb_dma", + "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_nand", + "ahb_sdram", "ahb_spi0", + "ahb_spi1", "ahb_spi2", + "ahb_stimer", "ahb_ve", "ahb_lcd", + "ahb_csi", "ahb_de_be", + "ahb_de_fe", "ahb_iep", + "ahb_mali400"; }; apb0_gates: clk@01c20068 { @@ -219,15 +121,8 @@ compatible = "allwinner,sun5i-a13-apb0-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb0>; - clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; + clock-output-names = "apb0_codec", "apb0_pio", + "apb0_ir"; }; apb1_gates: clk@01c2006c { @@ -238,384 +133,39 @@ clock-output-names = "apb1_i2c0", "apb1_i2c1", "apb1_i2c2", "apb1_uart1", "apb1_uart3"; }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_phy"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mbus"; - }; }; +}; - soc@01c00000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun4i-a10-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <27>; - clocks = <&ahb_gates 6>; - #dma-cells = <2>; - }; - - spi0: spi@01c05000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c05000 0x1000>; - interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 27>, - <&dma SUN4I_DMA_DEDICATED 26>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@01c06000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 9>, - <&dma SUN4I_DMA_DEDICATED 8>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <32>; - status = "disabled"; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <34>; - status = "disabled"; - }; - - usbphy: phy@01c13400 { - #phy-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; - reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>; - clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>; - reset-names = "usb0_reset", "usb1_reset"; - status = "disabled"; - }; - - ehci0: usb@01c14000 { - compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; - reg = <0x01c14000 0x100>; - interrupts = <39>; - clocks = <&ahb_gates 1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci0: usb@01c14400 { - compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; - reg = <0x01c14400 0x100>; - interrupts = <40>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - spi2: spi@01c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; - interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 29>, - <&dma SUN4I_DMA_DEDICATED 28>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-a10-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - pio: pinctrl@01c20800 { - compatible = "allwinner,sun5i-a13-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <28>; - clocks = <&apb0_gates 5>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - #size-cells = <0>; - #gpio-cells = <3>; - - uart1_pins_a: uart1@0 { - allwinner,pins = "PE10", "PE11"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - uart1_pins_b: uart1@1 { - allwinner,pins = "PG3", "PG4"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0x90>; - interrupts = <22>; - clocks = <&osc24M>; - }; - - wdt: watchdog@01c20c90 { - compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; - - lradc: lradc@01c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = <31>; - status = "disabled"; - }; - - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10>; - }; - - rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-a10-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - #thermal-sensor-cells = <0>; - }; - - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <2>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 17>; - status = "disabled"; - }; - - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = <4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 19>; - status = "disabled"; - }; - - i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <7>; - clocks = <&apb1_gates 0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; +&cpu0 { + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1400000 + 912000 1350000 + 864000 1300000 + 624000 1200000 + 576000 1200000 + 432000 1200000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <5>; +}; - i2c1: i2c@01c2b000 { - compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <8>; - clocks = <&apb1_gates 1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; +&pio { + compatible = "allwinner,sun5i-a13-pinctrl"; - i2c2: i2c@01c2b400 { - compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b400 0x400>; - interrupts = <9>; - clocks = <&apb1_gates 2>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; + uart1_pins_a: uart1@0 { + allwinner,pins = "PE10", "PE11"; + allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - timer@01c60000 { - compatible = "allwinner,sun5i-a13-hstimer"; - reg = <0x01c60000 0x1000>; - interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; - }; + uart1_pins_b: uart1@1 { + allwinner,pins = "PG3", "PG4"; + allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi new file mode 100644 index 000000000000..54b097830434 --- /dev/null +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -0,0 +1,609 @@ +/* + * Copyright 2012-2015 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" + +#include <dt-bindings/dma/sun4i-a10.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0x0>; + clocks = <&cpu>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + osc24M: clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: clk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + pll1: clk@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + pll4: clk@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll4"; + }; + + pll5: clk@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: clk@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + + /* dummy is 200M */ + cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; + clock-output-names = "cpu"; + }; + + axi: axi@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + ahb: ahb@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun5i-a13-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>, <&cpu>, <&pll6 1>; + clock-output-names = "ahb"; + /* + * Use PLL6 as parent, instead of CPU/AXI + * which has rate changes due to cpufreq + */ + assigned-clocks = <&ahb>; + assigned-clock-parents = <&pll6 1>; + }; + + apb0: apb0@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + clock-output-names = "apb0"; + }; + + apb1: clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; + clock-output-names = "apb1"; + }; + + axi_gates: clk@01c2005c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-axi-gates-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&axi>; + clock-output-names = "axi_dram"; + }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun5i-a13-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&pll6 1>; + clock-output-names = "usb_ohci0", "usb_phy"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun5i-a13-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mbus"; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram-controller@01c00000 { + compatible = "allwinner,sun4i-a10-sram-controller"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_a: sram@00000000 { + compatible = "mmio-sram"; + reg = <0x00000000 0xc000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0xc000>; + }; + + sram_d: sram@00010000 { + compatible = "mmio-sram"; + reg = <0x00010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00010000 0x1000>; + + otg_sram: sram-section@0000 { + compatible = "allwinner,sun4i-a10-sram-d"; + reg = <0x0000 0x1000>; + status = "disabled"; + }; + }; + }; + + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + + spi0: spi@01c05000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <10>; + clocks = <&ahb_gates 20>, <&spi0_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 27>, + <&dma SUN4I_DMA_DEDICATED 26>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@01c06000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <11>; + clocks = <&ahb_gates 21>, <&spi1_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 9>, + <&dma SUN4I_DMA_DEDICATED 8>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <32>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <33>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <34>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usbphy: phy@01c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun5i-a13-usb-phy"; + reg = <0x01c13400 0x10 0x01c14800 0x4>; + reg-names = "phy_ctrl", "pmu1"; + clocks = <&usb_clk 8>; + clock-names = "usb_phy"; + resets = <&usb_clk 0>, <&usb_clk 1>; + reset-names = "usb0_reset", "usb1_reset"; + status = "disabled"; + }; + + ehci0: usb@01c14000 { + compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; + reg = <0x01c14000 0x100>; + interrupts = <39>; + clocks = <&ahb_gates 1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@01c14400 { + compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; + reg = <0x01c14400 0x100>; + interrupts = <40>; + clocks = <&usb_clk 6>, <&ahb_gates 2>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + spi2: spi@01c17000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c17000 0x1000>; + interrupts = <12>; + clocks = <&ahb_gates 22>, <&spi2_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 29>, + <&dma SUN4I_DMA_DEDICATED 28>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sun4i-a10-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pio: pinctrl@01c20800 { + reg = <0x01c20800 0x400>; + interrupts = <28>; + clocks = <&apb0_gates 5>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + #size-cells = <0>; + #gpio-cells = <3>; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB15", "PB16"; + allwinner,function = "i2c1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB17", "PB18"; + allwinner,function = "i2c2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", "PC13", + "PC14", "PC15"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <22>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-a10-wdt"; + reg = <0x01c20c90 0x10>; + }; + + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + + sid: eeprom@01c23800 { + compatible = "allwinner,sun4i-a10-sid"; + reg = <0x01c23800 0x10>; + }; + + rtp: rtp@01c25000 { + compatible = "allwinner,sun5i-a13-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + #thermal-sensor-cells = <0>; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 17>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 19>; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun4i-a10-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <7>; + clocks = <&apb1_gates 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <8>; + clocks = <&apb1_gates 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <9>; + clocks = <&apb1_gates 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + timer@01c60000 { + compatible = "allwinner,sun5i-a13-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <82>, <83>; + clocks = <&ahb_gates 28>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index be9f5ee6b59e..2f8cfab771e2 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,39 +53,41 @@ model = "Allwinner A31 APP4 EVB1 Evaluation Board"; compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31"; + aliases { + serial0 = &uart0; + }; + chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; +}; - soc@01c00000 { - pio: pinctrl@01c20800 { - usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; +&ehci0 { + status = "okay"; +}; - usbphy: phy@01c19400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; +&pio { + usb1_vbus_pin_a: usb1_vbus_pin@0 { + allwinner,pins = "PH27"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; - ehci0: usb@01c1a000 { - status = "okay"; - }; +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_a>; + gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_a>; - gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 84630e56acd7..0cf9926d1e93 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,79 +53,81 @@ model = "WITS A31 Colombus Evaluation Board"; compatible = "wits,colombus", "allwinner,sun6i-a31"; + aliases { + serial0 = &uart0; + }; + chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "fail"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c19400 { - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci1: usb@01c1b000 { - status = "okay"; - }; - - pio: pinctrl@01c20800 { - mmc0_pins_a: mmc0@0 { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - mmc0_cd_pin_colombus: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb2_vbus_pin_colombus: usb2_vbus_pin@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "fail"; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; +&mmc0_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&pio { + mmc0_cd_pin_colombus: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - reg_usb2_vbus: usb2-vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin_colombus>; - gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; - status = "okay"; + usb2_vbus_pin_colombus: usb2_vbus_pin@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb2_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_pin_colombus>; + gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 8b61b1b342e0..d0cfadac0691 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,8 +53,17 @@ model = "Merrii A31 Hummingbird"; compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31"; + aliases { + serial0 = &uart0; + }; + chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */ }; }; @@ -106,10 +110,16 @@ }; }; +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <&vcc_3v0>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ cd-inverted; @@ -121,6 +131,16 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>; + vmmc-supply = <&vcc_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + &ohci0 { status = "okay"; }; @@ -132,6 +152,80 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + wifi_reset_pin_hummingbird: wifi_reset_pin@0 { + allwinner,pins = "PG10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&p2wi { + status = "okay"; + + axp221: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + dcdc1-supply = <&vcc_3v0>; + dcdc5-supply = <&vcc_dram>; + + regulators { + x-powers,dcdc-freq = <3000>; + + vcc_3v0: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; + }; + + vdd_cpu: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; + }; + + vdd_gpu: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; + }; + + vdd_sys_dll: dcdc4 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys-dll"; + }; + + vcc_dram: dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; + }; + + vcc_wifi: aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_wifi"; + }; + + avcc: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; + }; + }; }; ®_usb1_vbus { diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts new file mode 100644 index 000000000000..e9185dad67ee --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -0,0 +1,149 @@ +/* + * Copyright 2015 Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Mele I7 Quad top set box"; + compatible = "mele,i7", "allwinner,sun6i-a31"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_i7>; + + blue { + label = "i7:blue:usr"; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + cd-inverted; + status = "okay"; +}; + +&pio { + led_pins_i7: led_pins@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_i7: mmc0_cd_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb1_vbus_pin_i7: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_i7>; + gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 139a21e6b695..6e0e5687a09c 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -53,100 +48,102 @@ #include <dt-bindings/pinctrl/sun4i-a10.h> / { - model = "Mele M9 / A1000G Quad top set box"; + model = "Mele M9 top set box"; compatible = "mele,m9", "allwinner,sun6i-a31"; + aliases { + serial0 = &uart0; + }; + chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m9>; - usbphy: phy@01c19400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; + blue { + label = "m9:blue:usr"; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; }; + }; +}; - ehci0: usb@01c1a000 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ehci1: usb@01c1b000 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - pio: pinctrl@01c20800 { - led_pins_m9: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_m9: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb1_vbus_pin_m9: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - gmac: ethernet@01c30000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + cd-inverted; + status = "okay"; +}; - ir@01f02000 { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; - status = "okay"; - }; +&pio { + led_pins_m9: led_pins@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m9>; - - blue { - label = "m9:blue:usr"; - gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; - }; + mmc0_cd_pin_m9: mmc0_cd_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - reg_usb1_vbus: usb1-vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_m9>; - gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; - status = "okay"; + usb1_vbus_pin_m9: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb1_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_m9>; + gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts new file mode 100644 index 000000000000..4404f37d132e --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -0,0 +1,149 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Mele A1000G Quad top set box"; + compatible = "mele,a1000g-quad", "allwinner,sun6i-a31"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m9>; + + blue { + label = "m9:blue:usr"; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + cd-inverted; + status = "okay"; +}; + +&pio { + led_pins_m9: led_pins@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_m9: mmc0_cd_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb1_vbus_pin_m9: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_m9>; + gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index fa2f403ccf28..008047a018cf 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -50,6 +45,7 @@ #include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -66,7 +62,8 @@ ranges; framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll6 0>; status = "disabled"; @@ -96,10 +93,22 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clocks = <&cpu>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <3>; }; cpu@1 { @@ -121,6 +130,38 @@ }; }; + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&rtp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + memory { reg = <0x40000000 0x80000000>; }; @@ -196,6 +237,14 @@ reg = <0x01c20054 0x4>; clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; clock-output-names = "ahb1"; + + /* + * Clock AHB1 from PLL6, instead of CPU/AXI which + * has rate changes due to cpufreq. Also the DMA + * controller requires AHB1 clocked from PLL6. + */ + assigned-clocks = <&ahb1>; + assigned-clock-parents = <&pll6 0>; }; ahb1_gates: clk@01c20060 { @@ -251,9 +300,10 @@ reg = <0x01c2006c 0x4>; clocks = <&apb2>; clock-output-names = "apb2_i2c0", "apb2_i2c1", - "apb2_i2c2", "apb2_i2c3", "apb2_uart0", - "apb2_uart1", "apb2_uart2", "apb2_uart3", - "apb2_uart4", "apb2_uart5"; + "apb2_i2c2", "apb2_i2c3", + "apb2_uart0", "apb2_uart1", + "apb2_uart2", "apb2_uart3", + "apb2_uart4", "apb2_uart5"; }; mmc0_clk: clk@01c20088 { @@ -330,7 +380,7 @@ usb_clk: clk@01c200cc { #clock-cells = <1>; - #reset-cells = <1>; + #reset-cells = <1>; compatible = "allwinner,sun6i-a31-usb-clk"; reg = <0x01c200cc 0x4>; clocks = <&osc24M>; @@ -340,10 +390,13 @@ }; /* - * The following two are dummy clocks, placeholders used in the gmac_tx - * clock. The gmac driver will choose one parent depending on the PHY - * interface mode, using clk_set_rate auto-reparenting. - * The actual TX clock rate is not controlled by the gmac_tx clock. + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. */ mii_phy_tx_clk: clk@1 { #clock-cells = <0>; @@ -381,10 +434,6 @@ clocks = <&ahb1_gates 6>; resets = <&ahb1_rst 6>; #dma-cells = <1>; - - /* DMA controller requires AHB1 clocked from PLL6 */ - assigned-clocks = <&ahb1>; - assigned-clock-parents = <&pll6 0>; }; mmc0: mmc@01c0f000 { @@ -402,6 +451,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -419,6 +470,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -436,6 +489,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc3: mmc@01c12000 { @@ -453,6 +508,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; usbphy: phy@01c19400 { @@ -575,12 +632,21 @@ }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; allwinner,function = "mmc0"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + allwinner,function = "mmc1"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + gmac_pins_mii_a: gmac_mii@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", @@ -805,7 +871,8 @@ }; timer@01c60000 { - compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; + compatible = "allwinner,sun6i-a31-hstimer", + "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, @@ -896,7 +963,8 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, + <&pll6 0>; clock-output-names = "ar100"; }; @@ -973,6 +1041,27 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + p2wi_pins: p2wi { + allwinner,pins = "PL0", "PL1"; + allwinner,function = "s_p2wi"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + p2wi: i2c@01f03400 { + compatible = "allwinner,sun6i-a31-p2wi"; + reg = <0x01f03400 0x400>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 3>; + clock-frequency = <100000>; + resets = <&apb0_rst 3>; + pinctrl-names = "default"; + pinctrl-0 = <&p2wi_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts index bc3734f67cf0..1e2411a2bcea 100644 --- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -53,10 +48,14 @@ / { model = "CSQ CS908 top set box"; compatible = "csq,cs908", "allwinner,sun6i-a31s"; -}; -&usbphy { - status = "okay"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci0 { @@ -67,25 +66,6 @@ status = "okay"; }; -&ohci1 { - status = "okay"; -}; - -&pio { - usb1_vbus_pin_csq908: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_pins_mii_a>; @@ -102,3 +82,17 @@ pinctrl-0 = <&ir_pins_a>; status = "okay"; }; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/sun6i-a31s.dtsi index eaf5ec8fd459..c17a32771b98 100644 --- a/arch/arm/boot/dts/sun6i-a31s.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s.dtsi @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 5dd139e7792e..9f7b472e6725 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -65,160 +60,164 @@ serial2 = &uart7; }; - soc@01c00000 { - spi0: spi@01c05000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bananapi>; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; + green { + label = "bananapi:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; + }; - ehci0: usb@01c14000 { - status = "okay"; - }; + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_bananapi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; + }; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&ahci { + status = "okay"; +}; - ahci: sata@01c18000 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; - pinctrl@01c20800 { - mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - gmac_power_pin_bananapi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - led_pins_bananapi: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - uart3: serial@01c28c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_b>; - status = "okay"; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - uart7: serial@01c29c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; - status = "okay"; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; +&ohci0 { + status = "okay"; +}; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; +&ohci1 { + status = "okay"; +}; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - phy-supply = <®_gmac_3v3>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; +&pio { + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bananapi>; - - green { - label = "bananapi:green:usr"; - gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; - }; + gmac_power_pin_bananapi: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_usb1_vbus: usb1-vbus { - status = "okay"; + led_pins_bananapi: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; +®_usb1_vbus { + status = "okay"; +}; - reg_gmac_3v3: gmac-3v3 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_bananapi>; - regulator-name = "gmac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - enable-active-high; - gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; - }; +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>, + <&spi0_cs1_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_b>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index fb89fe7ed21b..18fcc87f4621 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -55,6 +50,16 @@ model = "LeMaker Banana Pro"; compatible = "lemaker,bananapro", "allwinner,sun7i-a20"; + aliases { + serial0 = &uart0; + serial1 = &uart4; + serial2 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -144,7 +149,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; @@ -233,7 +238,9 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>, + <&spi0_cs1_pins_a>; status = "okay"; }; @@ -243,9 +250,9 @@ status = "okay"; }; -&uart2 { +&uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart4_pins_b>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index c4ab6edb6f15..39a51d5143f7 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -59,94 +54,12 @@ model = "Cubietech Cubieboard2"; compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - led_pins_cubieboard2: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; + aliases { + serial0 = &uart0; + }; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -164,26 +77,94 @@ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; +}; - reg_ahci_5v: ahci-5v { - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; }; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; -#include "axp209.dtsi" +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; -&cpu0 { - cpu-supply = <®_dcdc2>; +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; }; +&ohci1 { + status = "okay"; +}; + +&pio { + led_pins_cubieboard2: led_pins@0 { + allwinner,pins = "PH20", "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_ahci_5v { + status = "okay"; +}; + +#include "axp209.dtsi" + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -208,3 +189,23 @@ regulator-max-microvolt = <3000000>; regulator-name = "avcc"; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 8f74a649576d..4611e2f5a99e 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -59,142 +54,12 @@ model = "Cubietech Cubietruck"; compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - mmc3: mmc@01c12000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc3_pins_a: mmc3@0 { - /* AP6210 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - vmmc3_pin_cubietruck: vmmc3_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - led_pins_cubietruck: led_pins@0 { - allwinner,pins = "PH7", "PH11", "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - pwm: pwm@01c20e00 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; - status = "okay"; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; - - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - status = "okay"; + aliases { + serial0 = &uart0; + }; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -223,26 +88,6 @@ }; }; - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_cubietruck>; - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - reg_usb0_vbus: usb0-vbus { - pinctrl-0 = <&usb0_vbus_pin_a>; - gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; - - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; - reg_vmmc3: vmmc3 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -255,12 +100,149 @@ }; }; -#include "axp209.dtsi" +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; &cpu0 { cpu-supply = <®_dcdc2>; }; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc3_pins_a { + /* AP6210 requires pull-up */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vmmc3_pin_cubietruck: vmmc3_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_cubietruck: led_pins@0 { + allwinner,pins = "PH7", "PH11", "PH20", "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PH17"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; + status = "okay"; +}; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_cubietruck>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +#include "axp209.dtsi" + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -285,3 +267,30 @@ regulator-max-microvolt = <3000000>; regulator-name = "avcc"; }; + +®_usb0_vbus { + pinctrl-0 = <&usb0_vbus_pin_a>; + gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 86a944ce19f8..37f4a5497452 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -3,12 +3,43 @@ * * Wills Wang <wills.wang.open@gmail.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -31,197 +62,8 @@ serial4 = &uart5; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - mmc3: mmc@01c12000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_mmc3_vdd>; - bus-width = <4>; - non-removable; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pio: pinctrl@01c20800 { - ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { - allwinner,pins = "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - pwm: pwm@01c20e00 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; - status = "okay"; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - uart2: serial@01c28800 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; - status = "okay"; - }; - - uart3: serial@01c28c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; - status = "okay"; - }; - - uart4: serial@01c29000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; - }; - - uart5: serial@01c29400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; - - i2c3: i2c@01c2b800 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; - status = "okay"; - }; - - spi2: spi@01c17000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_b>; - status = "okay"; - }; - - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - phy-supply = <®_gmac_vdd>; - /* phy reset config */ - snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ - snps,reset-active-low; - /* wait 1s after reset, otherwise fail to read phy id */ - snps,reset-delays-us = <0 10000 1000000>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - }; - - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; - gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ - status = "okay"; - }; - - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; - gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ - status = "okay"; - }; - - reg_usb2_vbus: usb2-vbus { - status = "okay"; + chosen { + stdout-path = "serial0:115200n8"; }; reg_mmc3_vdd: mmc3_vdd { @@ -246,3 +88,195 @@ gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */ }; }; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_vdd>; + /* phy reset config */ + snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ + snps,reset-active-low; + /* wait 1s after reset, otherwise fail to read phy id */ + snps,reset-delays-us = <0 10000 1000000>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_mmc3_vdd>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { + allwinner,pins = "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; +}; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; + gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ + status = "okay"; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_b>, + <&spi2_cs0_pins_b>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 06148b4d000f..f32f6f20d923 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -57,123 +52,12 @@ model = "I12 / Q5 / QT840A A20 tvbox"; compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - mmc3: mmc@01c12000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc3_pins_a: mmc3@0 { - /* AP6210 / AP6330 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - vmmc3_pin_i12_tvbox: vmmc3_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - gmac_power_pin_i12_tvbox: gmac_power_pin@0 { - allwinner,pins = "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - led_pins_i12_tvbox: led_pins@0 { - allwinner,pins = "PH9", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + aliases { + serial0 = &uart0; + }; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - phy-supply = <®_gmac_3v3>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -192,14 +76,6 @@ }; }; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; - - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; - reg_vmmc3: vmmc3 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -236,3 +112,136 @@ gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; }; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc3_pins_a { + /* AP6210 / AP6330 requires pull-up */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vmmc3_pin_i12_tvbox: vmmc3_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + gmac_power_pin_i12_tvbox: gmac_power_pin@0 { + allwinner,pins = "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_i12_tvbox: led_pins@0 { + allwinner,pins = "PH9", "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 5add9f243ec3..8d9ea48dd98c 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -59,114 +54,120 @@ model = "Mele M3"; compatible = "mele,m3", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; + aliases { + serial0 = &uart0; + }; - mmc2: mmc@01c11000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - non-removable; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m3>; - ehci0: usb@01c14000 { - status = "okay"; + blue { + label = "m3:blue:usr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; + }; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; - pinctrl@01c20800 { - led_pins_m3: led_pins@0 { - allwinner,pins = "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - }; +&ohci0 { + status = "okay"; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m3>; +&ohci1 { + status = "okay"; +}; - blue { - label = "m3:blue:usr"; - gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; - }; +&pio { + led_pins_m3: led_pins@0 { + allwinner,pins = "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +®_usb1_vbus { + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts new file mode 100644 index 000000000000..4f432f8ade77 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -0,0 +1,148 @@ +/* + * Copyright 2015 Marcus Cooper + * + * Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "mk808c"; + compatible = "allwinner,mk808c", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + serial1 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 12ded69d61eb..769726dfb046 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -19,11 +19,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -60,118 +55,124 @@ model = "Olimex A20-OLinuXino-LIME"; compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; + aliases { + serial0 = &uart0; + }; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - ehci0: usb@01c14000 { - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; - ohci0: usb@01c14400 { - status = "okay"; + green { + label = "a20-olinuxino-lime:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - pinctrl@01c20800 { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - }; +&ohci0 { + status = "okay"; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxinolime>; +&ohci1 { + status = "okay"; +}; - green { - label = "a20-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; +&pio { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; - status = "okay"; + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 260dbd3bf29d..8acff78272b7 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -57,176 +52,182 @@ model = "Olimex A20-OLinuXino-LIME2"; compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; + aliases { + serial0 = &uart0; + }; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - ehci0: usb@01c14000 { - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; - ohci0: usb@01c14400 { - status = "okay"; + green { + label = "a20-olinuxino-lime2:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; + reg_axp_ipsout: axp_ipsout { + compatible = "regulator-fixed"; + regulator-name = "axp-ipsout"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - pinctrl@01c20800 { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; - led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + + acin-supply = <®_axp_ipsout>; + vin2-supply = <®_axp_ipsout>; + vin3-supply = <®_axp_ipsout>; + ldo24in-supply = <®_axp_ipsout>; + ldo3in-supply = <®_axp_ipsout>; + + regulators { + vdd_rtc: ldo1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; }; - }; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + avcc: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - - acin-supply = <®_axp_ipsout>; - vin2-supply = <®_axp_ipsout>; - vin3-supply = <®_axp_ipsout>; - ldo24in-supply = <®_axp_ipsout>; - ldo3in-supply = <®_axp_ipsout>; - - regulators { - vdd_rtc: ldo1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - }; - - avcc: ldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vcc_csi0: ldo3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - - vcc_csi1: ldo4 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_cpu: dcdc2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <2275000>; - regulator-always-on; - }; - - vdd_int: dcdc3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - }; + vcc_csi0: ldo3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; }; - }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + vcc_csi1: ldo4 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - status = "okay"; + vdd_cpu: dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <2275000>; + regulator-always-on; + }; - phy1: ethernet-phy@1 { - reg = <1>; + vdd_int: dcdc3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; }; }; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxinolime>; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - green { - label = "a20-olinuxino-lime2:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; +&ohci0 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +&ohci1 { + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&pio { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_axp_ipsout: axp_ipsout { - compatible = "regulator-fixed"; - regulator-name = "axp-ipsout"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 714e15ac5416..00f8f25eccae 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -3,12 +3,43 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -32,216 +63,220 @@ spi1 = &spi2; }; - soc@01c00000 { - spi1: spi@01c06000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>; - status = "okay"; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - mmc3: mmc@01c12000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; + green { + label = "a20-olinuxino-micro:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - spi2: spi@01c17000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; - ehci1: usb@01c1c000 { - status = "okay"; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - pinctrl@01c20800 { - mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { - allwinner,pins = "PH11"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@191 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <191274>; - }; - - button@392 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <392644>; - }; - - button@601 { - label = "Menu"; - linux,code = <KEY_MENU>; - channel = <0>; - voltage = <601151>; - }; - - button@795 { - label = "Search"; - linux,code = <KEY_SEARCH>; - channel = <0>; - voltage = <795090>; - }; - - button@987 { - label = "Home"; - linux,code = <KEY_HOMEPAGE>; - channel = <0>; - voltage = <987387>; - }; - - button@1184 { - label = "Esc"; - linux,code = <KEY_ESC>; - channel = <0>; - voltage = <1184678>; - }; - - button@1398 { - label = "Enter"; - linux,code = <KEY_ENTER>; - channel = <0>; - voltage = <1398804>; - }; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - uart6: serial@01c29800 { - pinctrl-names = "default"; - pinctrl-0 = <&uart6_pins_a>; - status = "okay"; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - uart7: serial@01c29c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; - status = "okay"; - }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + button@795 { + label = "Search"; + linux,code = <KEY_SEARCH>; + channel = <0>; + voltage = <795090>; + }; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; + }; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; + button@1184 { + label = "Esc"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1184678>; + }; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; + button@1398 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <1398804>; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxino>; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - green { - label = "a20-olinuxino-micro:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + cd-inverted; + status = "okay"; +}; - reg_ahci_5v: ahci-5v { - status = "okay"; - }; +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&pio { + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_ahci_5v { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>, + <&spi1_cs0_pins_a>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>, + <&spi2_cs0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6_pins_a>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts new file mode 100644 index 000000000000..73cd81ee02e3 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -0,0 +1,250 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Orange Pi Mini"; + compatible = "xunlong,orangepi-mini", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_orangepi>; + + green { + label = "orangepi:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ + }; + + blue { + label = "orangepi:blue:usr"; + gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */ + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_orangepi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp209.dtsi" + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc3_cd_pin_orangepi: mmc3_cd_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + gmac_power_pin_orangepi: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_orangepi: led_pins@0 { + allwinner,pins = "PH24", "PH25"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { + allwinner,pins = "PH26"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_bananapro>; + gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ + status = "okay"; +}; + +®_usb2_vbus { + pinctrl-0 = <&usb2_vbus_pin_bananapro>; + gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts new file mode 100644 index 000000000000..55a06ceb80ec --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -0,0 +1,228 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Orange Pi"; + compatible = "xunlong,orangepi", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_orangepi>; + + green { + label = "orangepi:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_orangepi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp209.dtsi" + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + gmac_power_pin_orangepi: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_orangepi: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { + allwinner,pins = "PH26"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_bananapro>; + gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ + status = "okay"; +}; + +®_usb2_vbus { + pinctrl-0 = <&usb2_vbus_pin_bananapro>; + gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts new file mode 100644 index 000000000000..5361fce26b45 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -0,0 +1,194 @@ +/* + * Copyright 2015 Adam Sampson <ats@offog.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "LinkSprite pcDuino3 Nano"; + compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_pcduino3_nano>; + + /* Marked "LED3" on the PCB. */ + usr1 { + label = "pcduino3-nano:green:usr1"; + gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */ + }; + + /* Marked "LED4" on the PCB. */ + usr2 { + label = "pcduino3-nano:green:usr2"; + gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */ + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_pcduino3_nano: led_pins@0 { + allwinner,pins = "PH16", "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>; + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + status = "okay"; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>; + gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 0a2c2aeb4687..afc9ecebed21 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -59,103 +54,12 @@ model = "LinkSprite pcDuino3"; compatible = "linksprite,pcduino3", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - ahci_pwr_pin_a: ahci_pwr_pin@0 { - allwinner,pins = "PH2"; - }; - - led_pins_pcduino3: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - key_pins_pcduino3: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; + aliases { + serial0 = &uart0; + }; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -196,17 +100,114 @@ gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; }; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&ahci_pwr_pin_a { + allwinner,pins = "PH2"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&pio { + led_pins_pcduino3: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_ahci_5v: ahci-5v { - gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; - status = "okay"; + key_pins_pcduino3: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_ahci_5v { + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts new file mode 100644 index 000000000000..83c6d3f872ff --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -0,0 +1,183 @@ +/* + * Copyright 2015 Aleksei Mamlin + * Aleksei Mamlin <mamlinav@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Wexler TAB7200"; + compatible = "wexler,tab7200", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@571 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <571428>; + }; + + button@761 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <761904>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index fdd181792b4b..6a63f30c9a69 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -68,7 +63,8 @@ ranges; framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; @@ -104,14 +100,14 @@ clocks = <&cpu>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < - /* kHz uV */ - 960000 1400000 - 912000 1400000 - 864000 1300000 - 720000 1200000 - 528000 1100000 - 312000 1000000 - 144000 900000 + /* kHz uV */ + 960000 1400000 + 912000 1400000 + 864000 1300000 + 720000 1200000 + 528000 1100000 + 312000 1000000 + 144000 900000 >; #cooling-cells = <2>; cooling-min-level = <0>; @@ -224,7 +220,8 @@ compatible = "allwinner,sun4i-a10-pll6-clk"; reg = <0x01c20028 0x4>; clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; + clock-output-names = "pll6_sata", "pll6_other", "pll6", + "pll6_div_4"; }; pll8: clk@01c20040 { @@ -253,10 +250,16 @@ ahb: ahb@01c20054 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; + compatible = "allwinner,sun5i-a13-ahb-clk"; reg = <0x01c20054 0x4>; - clocks = <&axi>; + clocks = <&axi>, <&pll6 3>, <&pll6 1>; clock-output-names = "ahb"; + /* + * Use PLL6 as parent, instead of CPU/AXI + * which has rate changes due to cpufreq + */ + assigned-clocks = <&ahb>; + assigned-clock-parents = <&pll6 3>; }; ahb_gates: clk@01c20060 { @@ -441,11 +444,12 @@ usb_clk: clk@01c200cc { #clock-cells = <1>; - #reset-cells = <1>; + #reset-cells = <1>; compatible = "allwinner,sun4i-a10-usb-clk"; reg = <0x01c200cc 0x4>; clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; + clock-output-names = "usb_ohci0", "usb_ohci1", + "usb_phy"; }; spi3_clk: clk@01c200d4 { @@ -465,10 +469,13 @@ }; /* - * The following two are dummy clocks, placeholders used in the gmac_tx - * clock. The gmac driver will choose one parent depending on the PHY - * interface mode, using clk_set_rate auto-reparenting. - * The actual TX clock rate is not controlled by the gmac_tx clock. + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. */ mii_phy_tx_clk: clk@2 { #clock-cells = <0>; @@ -527,6 +534,42 @@ #size-cells = <1>; ranges; + sram-controller@01c00000 { + compatible = "allwinner,sun4i-a10-sram-controller"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_a: sram@00000000 { + compatible = "mmio-sram"; + reg = <0x00000000 0xc000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0xc000>; + + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; + }; + + sram_d: sram@00010000 { + compatible = "mmio-sram"; + reg = <0x00010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00010000 0x1000>; + + otg_sram: sram-section@0000 { + compatible = "allwinner,sun4i-a10-sram-d"; + reg = <0x0000 0x1000>; + status = "disabled"; + }; + }; + }; + nmi_intc: interrupt-controller@01c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; @@ -576,6 +619,7 @@ reg = <0x01c0b000 0x1000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 17>; + allwinner,sram = <&emac_sram 1>; status = "disabled"; }; @@ -600,6 +644,8 @@ "sample"; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -615,6 +661,8 @@ "sample"; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -630,6 +678,8 @@ "sample"; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc3: mmc@01c12000 { @@ -645,6 +695,8 @@ "sample"; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; usbphy: phy@01c13400 { @@ -795,6 +847,13 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + uart4_pins_b: uart4@1 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "uart4"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + uart5_pins_a: uart5@0 { allwinner,pins = "PI10", "PI11"; allwinner,function = "uart5"; @@ -896,35 +955,71 @@ }; spi0_pins_a: spi0@0 { - allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14"; + allwinner,pins = "PI11", "PI12", "PI13"; + allwinner,function = "spi0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi0_cs0_pins_a: spi0_cs0@0 { + allwinner,pins = "PI10"; + allwinner,function = "spi0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi0_cs1_pins_a: spi0_cs1@0 { + allwinner,pins = "PI14"; allwinner,function = "spi0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi1_pins_a: spi1@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,pins = "PI17", "PI18", "PI19"; + allwinner,function = "spi1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi1_cs0_pins_a: spi1_cs0@0 { + allwinner,pins = "PI16"; allwinner,function = "spi1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PC19", "PC20", "PC21", "PC22"; + allwinner,pins = "PC20", "PC21", "PC22"; allwinner,function = "spi2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PB14", "PB15", "PB16", "PB17"; + allwinner,pins = "PB15", "PB16", "PB17"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_cs0_pins_a: spi2_cs0@0 { + allwinner,pins = "PC19"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_cs0_pins_b: spi2_cs0@1 { + allwinner,pins = "PB14"; allwinner,function = "spi2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; allwinner,function = "mmc0"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; @@ -938,28 +1033,44 @@ }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11"; + allwinner,pins = "PC6", "PC7", "PC8", + "PC9", "PC10", "PC11"; allwinner,function = "mmc2"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; mmc3_pins_a: mmc3@0 { - allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; + allwinner,pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; allwinner,function = "mmc3"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir0_pins_a: ir0@0 { - allwinner,pins = "PB3","PB4"; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; allwinner,function = "ir0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_pins_a: ir1@0 { - allwinner,pins = "PB22","PB23"; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; allwinner,function = "ir1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; @@ -1042,7 +1153,7 @@ }; rtp: rtp@01c25000 { - compatible = "allwinner,sun4i-a10-ts"; + compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; #thermal-sensor-cells = <0>; @@ -1129,7 +1240,8 @@ }; i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 0>; @@ -1139,7 +1251,8 @@ }; i2c1: i2c@01c2b000 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 1>; @@ -1149,7 +1262,8 @@ }; i2c2: i2c@01c2b400 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 2>; @@ -1159,7 +1273,8 @@ }; i2c3: i2c@01c2b800 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2b800 0x400>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 3>; @@ -1169,7 +1284,8 @@ }; i2c4: i2c@01c2c000 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2c000 0x400>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 15>; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi new file mode 100644 index 000000000000..7abd0ae3143d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -0,0 +1,636 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + interrupt-parent = <&gic>; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@0 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll6 0>; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; + }; + + cpus { + enable-method = "allwinner,sun8i-a23"; + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + pll1: clk@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + /* dummy clock until actually implemented */ + pll5: pll5_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "pll5"; + }; + + pll6: clk@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun6i-a31-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6", "pll6x2"; + }; + + cpu: cpu_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20050 0x4>; + + /* + * PLL1 is listed twice here. + * While it looks suspicious, it's actually documented + * that way both in the datasheet and in the code from + * Allwinner. + */ + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; + clock-output-names = "cpu"; + }; + + axi: axi_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-axi-clk"; + reg = <0x01c20050 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + ahb1: ahb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-ahb1-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; + clock-output-names = "ahb1"; + }; + + apb1: apb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb1>; + clock-output-names = "apb1"; + }; + + ahb1_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb1>; + clock-output-names = "ahb1_mipidsi", "ahb1_dma", + "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", + "ahb1_nand", "ahb1_sdram", + "ahb1_hstimer", "ahb1_spi0", + "ahb1_spi1", "ahb1_otg", "ahb1_ehci", + "ahb1_ohci", "ahb1_ve", "ahb1_lcd", + "ahb1_csi", "ahb1_be", "ahb1_fe", + "ahb1_gpu", "ahb1_spinlock", + "ahb1_drc"; + }; + + apb1_gates: clk@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-apb1-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_codec", "apb1_pio", + "apb1_daudio0", "apb1_daudio1"; + }; + + apb2: clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; + clock-output-names = "apb2"; + }; + + apb2_gates: clk@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-apb2-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb2>; + clock-output-names = "apb2_i2c0", "apb2_i2c1", + "apb2_i2c2", "apb2_uart0", + "apb2_uart1", "apb2_uart2", + "apb2_uart3", "apb2_uart4"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; + }; + + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun8i-a23-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic", + "usb_hsic_12M", "usb_ohci0"; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dma: dma-controller@01c02000 { + compatible = "allwinner,sun8i-a23-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb1_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ahb1_rst 8>; + reset-names = "ahb"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb1_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ahb1_rst 9>; + reset-names = "ahb"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb1_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ahb1_rst 10>; + reset-names = "ahb"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + pio: pinctrl@01c20800 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01c20800 0x400>; + /* interrupts get set in SoC specific dtsi file */ + clocks = <&apb1_gates 5>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0", "PG1", "PG2", + "PG3", "PG4", "PG5"; + allwinner,function = "mmc1"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc2_8bit_pins: mmc2_8bit { + allwinner,pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PH2", "PH3"; + allwinner,function = "i2c0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "i2c1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PE12", "PE13"; + allwinner,function = "i2c2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + ahb1_rst: reset@01c202c0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202c0 0xc>; + }; + + apb1_rst: reset@01c202d0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d0 0x4>; + }; + + apb2_rst: reset@01c202d8 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d8 0x4>; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; + + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 16>; + resets = <&apb2_rst 16>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 17>; + resets = <&apb2_rst 17>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 18>; + resets = <&apb2_rst 18>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 19>; + resets = <&apb2_rst 19>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart4: serial@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 20>; + resets = <&apb2_rst 20>; + dmas = <&dma 10>, <&dma 10>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb2_gates 0>; + resets = <&apb2_rst 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb2_gates 1>; + resets = <&apb2_rst 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb2_gates 2>; + resets = <&apb2_rst 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + + prcm@01f01400 { + compatible = "allwinner,sun8i-a23-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun8i-a23-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun8i-a23-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_timer", + "apb0_rsb", "apb0_uart", + "apb0_i2c"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + }; + + cpucfg@01f01c00 { + compatible = "allwinner,sun8i-a23-cpuconfig"; + reg = <0x01f01c00 0x300>; + }; + + r_uart: serial@01f02800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01f02800 0x400>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb0_gates 4>; + resets = <&apb0_rst 4>; + status = "disabled"; + }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-a23-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 0>; + resets = <&apb0_rst 0>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + r_uart_pins_a: r_uart@0 { + allwinner,pins = "PL2", "PL3"; + allwinner,function = "s_uart"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/sun8i-a23-evb.dts new file mode 100644 index 000000000000..610786e635fa --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-evb.dts @@ -0,0 +1,134 @@ +/* + * Copyright 2015 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Allwinner A23 Evaluation Board"; + compatible = "allwinner,sun8i-a23-evb", "allwinner,sun8i-a23"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@190 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <190000>; + }; + + button@390 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <390000>; + }; + + button@600 { + label = "Home"; + linux,code = <KEY_HOME>; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_evb: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +/* + * The RX line has a non-populated resistance. In order to use it, you + * need to solder R207 on the back of the board in order to close the + * line and get a working UART. + */ +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts index dd31c53e2ab6..382d64c3b78e 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 623573e46080..95134c69cfc1 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -64,71 +59,69 @@ }; chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; +}; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; - }; - - pinctrl@01c20800 { - mmc0_cd_pin_q8h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + /* pull-ups and devices require PMIC regulator */ + status = "failed"; +}; - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; - }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - /* pull-ups and devices require PMIC regulator */ - status = "failed"; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; - r_uart: serial@01f02800 { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; - }; +&pio { + mmc0_cd_pin_q8h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; }; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 382ebd137ee4..8698f7aa31c7 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -47,206 +42,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - -#include <dt-bindings/interrupt-controller/arm-gic.h> - -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sun8i-a23-a33.dtsi" / { - interrupt-parent = <&gic>; - - chosen { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - framebuffer@0 { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll6 0>; - status = "disabled"; - }; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <0>; - }; - - cpu@1 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <1>; - }; - }; - memory { reg = <0x40000000 0x40000000>; }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - osc24M: osc24M_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: osc32k_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - /* dummy clock until actually implemented */ - pll5: pll5_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - clock-output-names = "pll5"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6", "pll6x2"; - }; - - cpu: cpu_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20050 0x4>; - - /* - * PLL1 is listed twice here. - * While it looks suspicious, it's actually documented - * that way both in the datasheet and in the code from - * Allwinner. - */ - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; - clock-output-names = "cpu"; - }; - - axi: axi_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-axi-clk"; - reg = <0x01c20050 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb1: ahb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-ahb1-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; - clock-output-names = "ahb1"; - }; - - apb1: apb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb1>; - clock-output-names = "apb1"; - }; - - ahb1_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb1>; - clock-output-names = "ahb1_mipidsi", "ahb1_dma", - "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", - "ahb1_nand", "ahb1_sdram", - "ahb1_hstimer", "ahb1_spi0", - "ahb1_spi1", "ahb1_otg", "ahb1_ehci", - "ahb1_ohci", "ahb1_ve", "ahb1_lcd", - "ahb1_csi", "ahb1_be", "ahb1_fe", - "ahb1_gpu", "ahb1_spinlock", - "ahb1_drc"; - }; - - apb1_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-apb1-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb1>; - clock-output-names = "apb1_codec", "apb1_pio", - "apb1_daudio0", "apb1_daudio1"; - }; - - apb2: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; - clock-output-names = "apb2"; - }; - - apb2_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-apb2-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb2>; - clock-output-names = "apb2_i2c0", "apb2_i2c1", - "apb2_i2c2", "apb2_uart0", - "apb2_uart1", "apb2_uart2", - "apb2_uart3", "apb2_uart4"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun8i-a23-mbus-clk"; @@ -255,357 +58,11 @@ clock-output-names = "mbus"; }; }; +}; - soc@01c00000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun8i-a23-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ahb1_gates 6>; - resets = <&ahb1_rst 6>; - #dma-cells = <1>; - }; - - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb1_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ahb1_rst 8>; - reset-names = "ahb"; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c10000 0x1000>; - clocks = <&ahb1_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ahb1_rst 9>; - reset-names = "ahb"; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ahb1_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ahb1_rst 10>; - reset-names = "ahb"; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - pio: pinctrl@01c20800 { - compatible = "allwinner,sun8i-a23-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 5>; - gpio-controller; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #gpio-cells = <3>; - - uart0_pins_a: uart0@0 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PH2", "PH3"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PE12", "PE13"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ahb1_rst: reset@01c202c0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202c0 0xc>; - }; - - apb1_rst: reset@01c202d0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d0 0x4>; - }; - - apb2_rst: reset@01c202d8 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d8 0x4>; - }; - - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0xa0>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc24M>; - }; - - wdt0: watchdog@01c20ca0 { - compatible = "allwinner,sun6i-a31-wdt"; - reg = <0x01c20ca0 0x20>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - }; - - lradc: lradc@01c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - uart0: serial@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 16>; - resets = <&apb2_rst 16>; - dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 17>; - resets = <&apb2_rst 17>; - dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart2: serial@01c28800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28800 0x400>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 18>; - resets = <&apb2_rst 18>; - dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 19>; - resets = <&apb2_rst 19>; - dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart4: serial@01c29000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c29000 0x400>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 20>; - resets = <&apb2_rst 20>; - dmas = <&dma 10>, <&dma 10>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb2_gates 0>; - resets = <&apb2_rst 0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c1: i2c@01c2b000 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb2_gates 1>; - resets = <&apb2_rst 1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c2: i2c@01c2b400 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b400 0x400>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb2_gates 2>; - resets = <&apb2_rst 2>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; - reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, - <0x01c84000 0x2000>, - <0x01c86000 0x2000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - rtc: rtc@01f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - }; - - prcm@01f01400 { - compatible = "allwinner,sun8i-a23-prcm"; - reg = <0x01f01400 0x200>; - - ar100: ar100_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "ar100"; - }; - - ahb0: ahb0_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&ar100>; - clock-output-names = "ahb0"; - }; - - apb0: apb0_clk { - compatible = "allwinner,sun8i-a23-apb0-clk"; - #clock-cells = <0>; - clocks = <&ahb0>; - clock-output-names = "apb0"; - }; - - apb0_gates: apb0_gates_clk { - compatible = "allwinner,sun8i-a23-apb0-gates-clk"; - #clock-cells = <1>; - clocks = <&apb0>; - clock-output-names = "apb0_pio", "apb0_timer", - "apb0_rsb", "apb0_uart", - "apb0_i2c"; - }; - - apb0_rst: apb0_rst { - compatible = "allwinner,sun6i-a31-clock-reset"; - #reset-cells = <1>; - }; - }; - - r_uart: serial@01f02800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01f02800 0x400>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb0_gates 4>; - resets = <&apb0_rst 4>; - status = "disabled"; - }; - - r_pio: pinctrl@01f02c00 { - compatible = "allwinner,sun8i-a23-r-pinctrl"; - reg = <0x01f02c00 0x400>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>; - resets = <&apb0_rst 0>; - gpio-controller; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #gpio-cells = <3>; - - r_uart_pins_a: r_uart@0 { - allwinner,pins = "PL2", "PL3"; - allwinner,function = "s_uart"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - }; +&pio { + compatible = "allwinner,sun8i-a23-pinctrl"; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts new file mode 100644 index 000000000000..19db844863bb --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts @@ -0,0 +1,88 @@ +/* + * Copyright 2015 Vishnu Patekar + * Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "ET Q8 Quad Core Tablet (v1.6)"; + compatible = "et,q8-v1.6", "allwinner,sun8i-a33"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts new file mode 100644 index 000000000000..866703355b9c --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts @@ -0,0 +1,125 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Allwinner GA10H Quad Core Tablet (v1.1)"; + compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33"; + + aliases { + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; + + button@600 { + label = "Back"; + linux,code = <KEY_BACK>; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_q8h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts new file mode 100644 index 000000000000..5788c29cb56a --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -0,0 +1,129 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Sinlinx SinA33"; + compatible = "sinlinx,sina33", "allwinner,sun8i-a33"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191011>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <391304>; + }; + + button@600 { + label = "Home"; + linux,code = <KEY_HOME>; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&mmc2_8bit_pins { + /* eMMC is missing pull-ups */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&pio { + mmc0_cd_pin_sina33: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi new file mode 100644 index 000000000000..85ee08098b7b --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -0,0 +1,97 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-a23-a33.dtsi" + +/ { + cpus { + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + clocks { + /* Dummy clock for pll11 (DDR1) until actually implemented */ + pll11: pll11_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "pll11"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5>, <&pll11>; + clock-output-names = "mbus"; + }; + }; +}; + +&pio { + compatible = "allwinner,sun8i-a33-pinctrl"; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + + uart0_pins_b: uart0@1 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + +}; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts new file mode 100644 index 000000000000..6484dcf69873 --- /dev/null +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -0,0 +1,99 @@ +/* + * Copyright 2015 Tyler Baker + * + * Tyler Baker <tyler.baker@linaro.org> + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun9i-a80.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Cubietech Cubieboard4"; + compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + +}; + +&pio { + mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { + allwinner,pins = "PH18"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index a3fed2bdf620..6ce4b5e8b615 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -64,7 +59,7 @@ }; chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; leds { @@ -86,6 +81,29 @@ gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; }; }; + + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_pin_optimus>; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; }; &i2c3 { @@ -99,6 +117,14 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; +&ohci0 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + &pio { led_pins_optimus: led-pins@0 { allwinner,pins = "PH0", "PH1"; @@ -113,6 +139,20 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + usb1_vbus_pin_optimus: usb1_vbus_pin@1 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb3_vbus_pin_optimus: usb3_vbus_pin@1 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; &mmc0 { @@ -134,6 +174,12 @@ status = "okay"; }; +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_optimus>; + gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -150,3 +196,17 @@ /* Enable internal pull-up */ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + +&usbphy1 { + phy-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; + +&usbphy3 { + phy-supply = <®_usb3_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index f0f6fb91f8c3..a43ad779ee2f 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -114,6 +109,16 @@ reg = <0 0x20000000 0x02 0>; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -137,6 +142,28 @@ clock-output-names = "osc32k"; }; + usb_mod_clk: clk@00a08000 { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun9i-a80-usb-mod-clk"; + reg = <0x00a08000 0x4>; + clocks = <&ahb1_gates 1>; + clock-output-names = "usb0_ahb", "usb_ohci0", + "usb1_ahb", "usb_ohci1", + "usb2_ahb", "usb_ohci2"; + }; + + usb_phy_clk: clk@00a08004 { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun9i-a80-usb-phy-clk"; + reg = <0x00a08004 0x4>; + clocks = <&ahb1_gates 1>; + clock-output-names = "usb_phy0", "usb_hsic1_480M", + "usb_phy1", "usb_hsic2_480M", + "usb_phy2", "usb_hsic_12M"; + }; + pll4: clk@0600000c { #clock-cells = <0>; compatible = "allwinner,sun9i-a80-pll4-clk"; @@ -257,7 +284,7 @@ "ahb0_ss", "ahb0_sd", "ahb0_nand1", "ahb0_nand0", "ahb0_sdram", "ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts", - "ahb0_spi0","ahb0_spi1", "ahb0_spi2", + "ahb0_spi0", "ahb0_spi1", "ahb0_spi2", "ahb0_spi3"; }; @@ -323,6 +350,98 @@ */ ranges = <0 0 0 0x20000000>; + ehci0: usb@00a00000 { + compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; + reg = <0x00a00000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_mod_clk 1>; + resets = <&usb_mod_clk 17>; + phys = <&usbphy1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@00a00400 { + compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; + reg = <0x00a00400 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>; + resets = <&usb_mod_clk 17>; + phys = <&usbphy1>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy1: phy@00a00800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a00800 0x4>; + clocks = <&usb_phy_clk 1>; + clock-names = "phy"; + resets = <&usb_phy_clk 17>; + reset-names = "phy"; + status = "disabled"; + #phy-cells = <0>; + }; + + ehci1: usb@00a01000 { + compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; + reg = <0x00a01000 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_mod_clk 3>; + resets = <&usb_mod_clk 18>; + phys = <&usbphy2>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy2: phy@00a01800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a01800 0x4>; + clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, + <&usb_phy_clk 3>; + clock-names = "hsic_480M", "hsic_12M", "phy"; + resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; + reset-names = "hsic", "phy"; + status = "disabled"; + #phy-cells = <0>; + /* usb1 is always used with HSIC */ + phy_type = "hsic"; + }; + + ehci2: usb@00a02000 { + compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; + reg = <0x00a02000 0x100>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_mod_clk 5>; + resets = <&usb_mod_clk 19>; + phys = <&usbphy3>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@00a02400 { + compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; + reg = <0x00a02400 0x100>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>; + resets = <&usb_mod_clk 19>; + phys = <&usbphy3>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy3: phy@00a02800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a02800 0x4>; + clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>, + <&usb_phy_clk 5>; + clock-names = "hsic_480M", "hsic_12M", "phy"; + resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>; + reset-names = "hsic", "phy"; + status = "disabled"; + #phy-cells = <0>; + }; + mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; @@ -333,6 +452,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -345,6 +466,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -357,6 +480,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc3: mmc@01c12000 { @@ -369,6 +494,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc_config_clk: clk@01c13000 { @@ -438,6 +565,12 @@ clocks = <&osc24M>; }; + wdt: watchdog@06000ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x06000ca0 0x20>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + }; + pio: pinctrl@06000800 { compatible = "allwinner,sun9i-a80-pinctrl"; reg = <0x06000800 0x400>; diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index e02baa66b33c..51cc8383f70f 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index ed8a8acd3d34..bd43ed6d6ec7 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1647,6 +1647,10 @@ target-12v-supply = <&vdd_12v0_sata>; }; + hda@0,70030000 { + status = "okay"; + }; + padctl@0,7009f000 { pinctrl-0 = <&padctl_default>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 5c3f7813360d..79e724bb7df7 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -899,6 +899,7 @@ sdhci@0,700b0600 { status = "okay"; bus-width = <8>; + non-removable; }; ahub@0,70300000 { @@ -1040,6 +1041,8 @@ compatible = "regulator-fixed"; reg = <5>; regulator-name = "+VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_mux>; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 4db9be02399e..01a9f742b08f 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -633,11 +633,11 @@ clocks = <&tegra_car TEGRA124_CLK_HDA>, <&tegra_car TEGRA124_CLK_HDA2HDMI>, <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>; - clock-names = "hda", "hda2hdmi", "hdacodec_2x"; + clock-names = "hda", "hda2hdmi", "hda2codec_2x"; resets = <&tegra_car 125>, /* hda */ <&tegra_car 128>, /* hda2hdmi */ <&tegra_car 111>; /* hda2codec_2x */ - reset-names = "hda", "hda2hdmi", "hdacodec_2x"; + reset-names = "hda", "hda2hdmi", "hda2codec_2x"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index e2fed2712249..aea8994b35f2 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -31,6 +31,7 @@ vdd-supply = <&hdmi_vdd_reg>; pll-supply = <&hdmi_pll_reg>; + hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) @@ -893,6 +894,17 @@ gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vdd_hdmi: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "VDDIO_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_reg>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index a1b682ea01bd..bb1ca158273c 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -1,3 +1,4 @@ +#include <dt-bindings/input/input.h> #include "tegra30.dtsi" /** @@ -12,7 +13,7 @@ * tegra30-cardhu-a04.dts. * The identification of board is done in two ways, by looking the sticker * on PCB and by reading board id eeprom. - * The stciker will have number like 600-81291-1000-002 C.3. In this 4th + * The sticker will have number like 600-81291-1000-002 C.3. In this 4th * number is the fab version like here it is 002 and hence fab version A02. * The (downstream internal) U-Boot of Cardhu display the board-id as * follows: @@ -615,4 +616,31 @@ <&tegra_car TEGRA30_CLK_EXTERN1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + interrupt-parent = <&pmic>; + interrupts = <2 0>; + linux,code = <KEY_POWER>; + debounce-interval = <100>; + gpio-key,wakeup; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <10>; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <10>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 60e205a0f63d..782b11b2af6a 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -654,6 +654,21 @@ reset-names = "fuse"; }; + hda@70030000 { + compatible = "nvidia,tegra30-hda"; + reg = <0x70030000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_HDA>, + <&tegra_car TEGRA30_CLK_HDA2HDMI>, + <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>; + clock-names = "hda", "hda2hdmi", "hda2codec_2x"; + resets = <&tegra_car 125>, /* hda */ + <&tegra_car 128>, /* hda2hdmi */ + <&tegra_car 111>; /* hda2codec_2x */ + reset-names = "hda", "hda2hdmi", "hda2codec_2x"; + status = "disabled"; + }; + ahub@70080000 { compatible = "nvidia,tegra30-ahub"; reg = <0x70080000 0x200 diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts new file mode 100644 index 000000000000..200b0c99ed34 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts @@ -0,0 +1,79 @@ +/* + * Device Tree Source for UniPhier PH1-LD4 Reference Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-ld4.dtsi" +/include/ "uniphier-support-card.dtsi" + +/ { + model = "UniPhier PH1-LD4 Reference Board"; + compatible = "socionext,ph1-ld4-ref", "socionext,ph1-ld4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serialsc; + }; + + aliases { + serial0 = &serialsc; + }; +}; + +&extbus { + ranges = <0 0x00000000 0x0f000000 0x01000000 + 1 0x00000000 0x00000000 0x08000000>; +}; + +&support_card { + ranges = <0x00000000 1 0x03f00000 0x00100000>; +}; + +&serialsc { + interrupts = <0 49 4>; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi new file mode 100644 index 000000000000..6a34c56e4693 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -0,0 +1,110 @@ +/* + * Device Tree Source for UniPhier PH1-LD4 SoC + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "socionext,ph1-ld4"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + }; + + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x104>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x104>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + }; + }; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts new file mode 100644 index 000000000000..d891135a70c2 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts @@ -0,0 +1,79 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 Reference Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-pro4.dtsi" +/include/ "uniphier-support-card.dtsi" + +/ { + model = "UniPhier PH1-Pro4 Reference Board"; + compatible = "socionext,ph1-pro4-ref", "socionext,ph1-pro4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serialsc; + }; + + aliases { + serial0 = &serialsc; + }; +}; + +&extbus { + ranges = <0 0x00000000 0x0f000000 0x01000000 + 1 0x00000000 0x00000000 0x08000000>; +}; + +&support_card { + ranges = <0x00000000 1 0x03f00000 0x00100000>; +}; + +&serialsc { + interrupts = <0 50 4>; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi new file mode 100644 index 000000000000..dc633603aed2 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -0,0 +1,117 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 SoC + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "socionext,ph1-pro4"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "socionext,uniphier-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x304>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + }; + }; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts new file mode 100644 index 000000000000..3ea64ae009e9 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts @@ -0,0 +1,80 @@ +/* + * Device Tree Source for UniPhier PH1-sLD3 Reference Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-sld3.dtsi" +/include/ "uniphier-support-card.dtsi" + +/ { + model = "UniPhier PH1-sLD3 Reference Board"; + compatible = "socionext,ph1-sld3-ref", "socionext,ph1-sld3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000 + 0xc0000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serialsc; + }; + + aliases { + serial0 = &serialsc; + }; +}; + +&extbus { + ranges = <0 0x00000000 0x0f000000 0x01000000 + 1 0x00000000 0x00000000 0x08000000>; +}; + +&support_card { + ranges = <0x00000000 1 0x03f00000 0x00100000>; +}; + +&serialsc { + interrupts = <0 49 4>; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi new file mode 100644 index 000000000000..248b1886834f --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi @@ -0,0 +1,117 @@ +/* + * Device Tree Source for UniPhier PH1-sLD3 SoC + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "socionext,ph1-sld3"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "socionext,uniphier-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + timer@20000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&arm_timer_clk>; + }; + + timer@20000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x20000600 0x20>; + interrupts = <1 13 0x304>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@20001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x20001000 0x1000>, + <0x20000100 0x100>; + }; + + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts new file mode 100644 index 000000000000..dcdc4f74387d --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts @@ -0,0 +1,79 @@ +/* + * Device Tree Source for UniPhier PH1-sLD8 Reference Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-sld8.dtsi" +/include/ "uniphier-support-card.dtsi" + +/ { + model = "UniPhier PH1-sLD8 Reference Board"; + compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serialsc; + }; + + aliases { + serial0 = &serialsc; + }; +}; + +&extbus { + ranges = <0 0x00000000 0x0f000000 0x01000000 + 1 0x00000000 0x00000000 0x08000000>; +}; + +&support_card { + ranges = <0x00000000 1 0x03f00000 0x00100000>; +}; + +&serialsc { + interrupts = <0 48 4>; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi new file mode 100644 index 000000000000..baa71e1febb8 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -0,0 +1,110 @@ +/* + * Device Tree Source for UniPhier PH1-sLD8 SoC + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "socionext,ph1-sld8"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + }; + + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x104>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x104>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + }; + }; +}; diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi new file mode 100644 index 000000000000..da271e3b922a --- /dev/null +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -0,0 +1,65 @@ +/* + * Device Tree Source for UniPhier Support Card (Expansion Board) + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&extbus { + support_card: support_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ethsc: ethernet@00000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x00000000 0x1000>; + phy-mode = "mii"; + reg-io-width = <4>; + }; + + serialsc: uart@000b0000 { + compatible = "ns16550a"; + reg = <0x000b0000 0x20>; + clock-frequency = <12288000>; + reg-shift = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index fbef0828e930..68ca125b56ea 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -140,7 +140,7 @@ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts index fd8758b639f5..5447f2594659 100644 --- a/arch/arm/boot/dts/vf610-cosmic.dts +++ b/arch/arm/boot/dts/vf610-cosmic.dts @@ -68,7 +68,7 @@ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/vf610-pinfunc.h index 1ee681f7ce2f..fcad7132c871 100644 --- a/arch/arm/boot/dts/vf610-pinfunc.h +++ b/arch/arm/boot/dts/vf610-pinfunc.h @@ -369,7 +369,7 @@ #define VF610_PAD_PTC11__MLB_DATA 0x0E0 0x358 ALT6 0x1 #define VF610_PAD_PTC11__DEBUG_OUT 0x0E0 0x000 ALT7 0x0 #define VF610_PAD_PTC12__GPIO_57 0x0E4 0x000 ALT0 0x0 -#define VF610_PAD_PTC12__ENET_RMII_RXD1 0x0E4 0x000 ALT1 0x0 +#define VF610_PAD_PTC12__ENET_RMII1_RXD1 0x0E4 0x000 ALT1 0x0 #define VF610_PAD_PTC12__ESAI_SDO1 0x0E4 0x318 ALT3 0x1 #define VF610_PAD_PTC12__SAI2_TX_BCLK 0x0E4 0x370 ALT5 0x1 #define VF610_PAD_PTC12__DEBUG_OUT3 0x0E4 0x000 ALT7 0x0 diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index f64fddce3e2a..375ab23ca743 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -221,7 +221,7 @@ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts new file mode 100644 index 000000000000..2931a80caccb --- /dev/null +++ b/arch/arm/boot/dts/vf610m4-colibri.dts @@ -0,0 +1,99 @@ +/* + * Device tree for Colibri VF61 Cortex-M4 support + * + * Copyright (C) 2015 Stefan Agner + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "vf610m4.dtsi" + +/ { + model = "VF610 Cortex-M4"; + compatible = "fsl,vf610m4"; + + chosen { + bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw"; + linux,stdout-path = "&uart2"; + }; + + memory { + reg = <0x8c000000 0x3000000>; + }; +}; + +&gpio0 { + status = "disabled"; +}; + +&gpio1 { + status = "disabled"; +}; + +&gpio2 { + status = "disabled"; +}; + +&gpio3 { + status = "disabled"; +}; + +&gpio4 { + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&iomuxc { + vf610-colibri { + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi new file mode 100644 index 000000000000..9ffe2eb68ed4 --- /dev/null +++ b/arch/arm/boot/dts/vf610m4.dtsi @@ -0,0 +1,50 @@ +/* + * Device tree for VF6xx Cortex-M4 support + * + * Copyright (C) 2015 Stefan Agner + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armv7-m.dtsi" +#include "vfxxx.dtsi" + +&mscm_ir { + interrupt-parent = <&nvic>; +}; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 9ea54b3dba09..06915080b875 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -193,7 +193,7 @@ }; gem0: ethernet@e000b000 { - compatible = "cdns,zynq-gem"; + compatible = "cdns,zynq-gem", "cdns,gem"; reg = <0xe000b000 0x1000>; status = "disabled"; interrupts = <0 22 4>; @@ -204,7 +204,7 @@ }; gem1: ethernet@e000c000 { - compatible = "cdns,zynq-gem"; + compatible = "cdns,zynq-gem", "cdns,gem"; reg = <0xe000c000 0x1000>; status = "disabled"; interrupts = <0 45 4>; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 174571232ea5..9efd16cb2859 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -23,14 +23,19 @@ model = "Adapteva Parallella Board"; compatible = "adapteva,parallella", "xlnx,zynq-7000"; + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + }; + memory { device_type = "memory"; reg = <0x0 0x40000000>; }; chosen { - bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; - linux,stdout-path = "/amba/serial@e0001000"; + bootargs = "earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; + stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 1fc1d3911e9b..fb59d34e8ee6 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -30,7 +30,8 @@ }; chosen { - bootargs = "console=ttyPS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 850518d9b8ac..abf5d238ae04 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -30,7 +30,8 @@ }; chosen { - bootargs = "console=ttyPS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; usb_phy0: phy0 { diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 5658bc8434de..b9f2522012e8 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -29,7 +29,8 @@ }; chosen { - bootargs = "console=ttyPS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; usb_phy0: phy0 { diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts index a9a12ce5023b..16c9cacd668d 100644 --- a/arch/arm/boot/dts/zynq-zybo.dts +++ b/arch/arm/boot/dts/zynq-zybo.dts @@ -18,13 +18,19 @@ model = "Zynq ZYBO Development Board"; compatible = "digilent,zynq-zybo", "xlnx,zynq-7000"; + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + }; + memory { device_type = "memory"; reg = <0x0 0x20000000>; }; chosen { - bootargs = "console=ttyPS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index af95a624fe71..f008930277ed 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -112,6 +112,7 @@ struct omap3_control_regs { u32 csirxfe; u32 iva2_bootaddr; u32 iva2_bootmod; + u32 wkup_ctrl; u32 debobs_0; u32 debobs_1; u32 debobs_2; @@ -455,6 +456,7 @@ void omap3_control_save_context(void) omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR); control_context.iva2_bootmod = omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD); + control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL); control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0)); control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1)); control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2)); @@ -512,6 +514,7 @@ void omap3_control_restore_context(void) OMAP343X_CONTROL_IVA2_BOOTADDR); omap_ctrl_writel(control_context.iva2_bootmod, OMAP343X_CONTROL_IVA2_BOOTMOD); + omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL); omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0)); omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1)); omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2)); diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index 80d2b7d8e36e..ec406bc2c6d4 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -231,6 +231,9 @@ #define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17) /* 34xx GENERAL_WKUP register offsets */ +#define OMAP34XX_CONTROL_WKUP_CTRL (OMAP343X_CONTROL_GENERAL_WKUP - 0x4) +#define OMAP36XX_GPIO_IO_PWRDNZ BIT(6) + #define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \ 0x008 + (i)) #define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008) diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index af11511dda50..821171cf6b7d 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -44,6 +44,27 @@ static void __init omap2420_n8x0_legacy_init(void) #endif #ifdef CONFIG_ARCH_OMAP3 +/* + * Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V + * mode for MMC1 in case bootloader did not configure things. + * Note that if the pins are used for MMC1, pbias-regulator + * manages the IO voltage. + */ +static void __init omap3_gpio126_127_129(void) +{ + u32 reg; + + reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE); + reg &= ~OMAP343X_PBIASLITEVMODE1; + reg |= OMAP343X_PBIASLITEPWRDNZ1; + omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE); + if (cpu_is_omap3630()) { + reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL); + reg |= OMAP36XX_GPIO_IO_PWRDNZ; + omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL); + } +} + static void __init hsmmc2_internal_input_clk(void) { u32 reg; @@ -356,6 +377,7 @@ static struct pdata_init pdata_quirks[] __initdata = { { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, }, { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, }, + { "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, }, { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, }, diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index 3b1ac463a494..125865daaf17 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -1,6 +1,7 @@ menuconfig ARCH_STI bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7 select ARM_GIC + select ST_IRQCHIP select ARM_GLOBAL_TIMER select PINCTRL select PINCTRL_ST |