Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.1
- new board: G12a-based x96 max
- G12a: add peripheral clock controller and clock measure support
- s400: fix SD/eMMC max rate issues
- s400: audio: add sp/dif in support
- GX: support simplefb

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson: add g12a x96 max board
  dt-bindings: arm: amlogic: add amediatech x96-max bindings
  arm64: dts: meson: g12a: add peripheral clock controller
  arm64: dts: meson: g12a: add clk measure support
  arm64: dts: meson: axg: add clk measure support
  arm64: dts: meson: fix g12a buses
  arm64: dts: meson-axg: add efuse device
  arm64: dts: meson: s400: fix emmc maximum rate
  arm64: dts: meson: s400: enable sdr104 on sdio
  arm64: dts: meson-gx: add support for simplefb
  dt-bindings: meson: add specific simplefb bindings
  arm64: dts: meson-gx: Add canvas provider node to the vpu
  arm64: dts: meson-axg: s400: add spdifin to the sound card
  arm64: dts: meson-axg: s400: add spdif-dir codec
  arm64: dts: meson-axg: add spdifin

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

8 files changed, 157 insertions, 24 deletions

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index f12efa27c636..0821fed4c074 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 824eba98db2c..75fe1a2c49d0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -95,6 +95,13 @@
 		sound-name-prefix = "MIC";
 	};
 
+	spdif_dir: audio-codec-4 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+		status = "okay";
+		sound-name-prefix = "DIR";
+	};
+
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
@@ -249,6 +256,9 @@
 				"TODDR_A IN 2", "TDMIN_C OUT",
 				"TODDR_B IN 2", "TDMIN_C OUT",
 				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 3", "SPDIFIN Capture",
+				"TODDR_B IN 3", "SPDIFIN Capture",
+				"TODDR_C IN 3", "SPDIFIN Capture",
 				"TODDR_A IN 4", "PDM Capture",
 				"TODDR_B IN 4", "PDM Capture",
 				"TODDR_C IN 4", "PDM Capture",
@@ -326,6 +336,14 @@
 		};
 
 		dai-link-8 {
+			sound-dai = <&spdifin>;
+
+			codec {
+				sound-dai = <&spdif_dir>;
+			};
+		};
+
+		dai-link-9 {
 			sound-dai = <&pdm>;
 
 			codec {
@@ -446,7 +464,8 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	max-frequency = <100000000>;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
 	non-removable;
 	disable-wp;
 
@@ -469,9 +488,8 @@
 	pinctrl-names = "default", "clk-gate";
 
 	bus-width = <8>;
-	cap-sd-highspeed;
 	cap-mmc-highspeed;
-	max-frequency = <180000000>;
+	max-frequency = <200000000>;
 	non-removable;
 	disable-wp;
 	mmc-ddr-1_8v;
@@ -483,6 +501,12 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
+&spdifin {
+	pinctrl-0 = <&spdif_in_a19_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &spdifout {
 	pinctrl-0 = <&spdif_out_a20_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 1b69efabd49a..34704fecf756 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -111,6 +111,14 @@
 		compatible = "amlogic,meson-gxbb-sm";
 	};
 
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		clocks = <&clkc CLKID_EFUSE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		read-only;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -1260,6 +1268,18 @@
 				status = "disabled";
 			};
 
+			spdifin: audio-controller@400 {
+				compatible = "amlogic,axg-spdifin";
+				reg = <0x0 0x400 0x0 0x30>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "SPDIFIN";
+				interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+					 <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+				clock-names = "pclk", "refclk";
+				status = "disabled";
+			};
+
 			spdifout: audio-controller@480 {
 				compatible = "amlogic,axg-spdifout";
 				reg = <0x0 0x480 0x0 0x50>;
@@ -1590,6 +1610,11 @@
 				status = "disabled";
 			};
 
+			clk_msr: clock-measure@18000 {
+				compatible = "amlogic,meson-axg-clk-measure";
+				reg = <0x0 0x18000 0x0 0x10>;
+			};
+
 			i2c3: i2c@1c000 {
 				compatible = "amlogic,meson-axg-i2c";
 				reg = <0x0 0x1c000 0x0 0x20>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
new file mode 100644
index 000000000000..c62d3d5706ff
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+
+/ {
+	compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a";
+	model = "Shenzhen Amediatech Technology Co., Ltd X96 Max";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 10418e4b048a..17c6217f8a84 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -78,20 +78,41 @@
 		#size-cells = <2>;
 		ranges;
 
-		periphs: periphs@ff634000 {
+		apb: bus@ff600000 {
 			compatible = "simple-bus";
-			reg = <0x0 0xff634000 0x0 0x2000>;
+			reg = <0x0 0xff600000 0x0 0x200000>;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
-		};
+			ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>;
+
+			periphs: bus@34400 {
+				compatible = "simple-bus";
+				reg = <0x0 0x34400 0x0 0x400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>;
+			};
 
-		hiubus: bus@ff63c000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xff63c000 0x0 0x1c00>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+			hiu: bus@3c000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x3c000 0x0 0x1400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>;
+
+				hhi: system-controller@0 {
+					compatible = "amlogic,meson-gx-hhi-sysctrl",
+						     "simple-mfd", "syscon";
+					reg = <0 0 0 0x400>;
+
+					clkc: clock-controller {
+						compatible = "amlogic,g12a-clkc";
+						#clock-cells = <1>;
+						clocks = <&xtal>;
+						clock-names = "xtal";
+					};
+				};
+			};
 		};
 
 		aobus: bus@ff800000 {
@@ -102,7 +123,8 @@
 			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
 
 			uart_AO: serial@3000 {
-				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				compatible = "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x3000 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>, <&xtal>, <&xtal>;
@@ -111,7 +133,8 @@
 			};
 
 			uart_AO_B: serial@4000 {
-				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				compatible = "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x4000 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>, <&xtal>, <&xtal>;
@@ -135,18 +158,15 @@
 
 		cbus: bus@ffd00000 {
 			compatible = "simple-bus";
-			reg = <0x0 0xffd00000 0x0 0x25000>;
+			reg = <0x0 0xffd00000 0x0 0x100000>;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
-		};
+			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>;
 
-		apb: apb@ffe00000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xffe00000 0x0 0x200000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+			clk_msr: clock-measure@18000 {
+				compatible = "amlogic,meson-g12a-clk-measure";
+				reg = <0x0 0x18000 0x0 0x10>;
+			};
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 3b63ead4f4ed..6772709b9e19 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -50,6 +50,28 @@
 		};
 	};
 
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		simplefb_cvbs: framebuffer-cvbs {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-cvbs";
+			power-domains = <&pwrc_vpu>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-hdmi";
+			power-domains = <&pwrc_vpu>;
+			status = "disabled";
+		};
+	};
+
 	cpus {
 		#address-cells = <0x2>;
 		#size-cells = <0x0>;
@@ -510,6 +532,7 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			amlogic,canvas = <&canvas>;
 
 			/* CVBS VDAC output port */
 			cvbs_vdac_port: port@0 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index a7b883ced0a8..a60d3652beee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -784,6 +784,12 @@
 	resets = <&reset RESET_SD_EMMC_C>;
 };
 
+&simplefb_hdmi {
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+};
+
 &spicc {
 	clocks = <&clkc CLKID_SPICC>;
 	clock-names = "core";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index d5c3d78aafeb..3093ae421b17 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -787,6 +787,12 @@
 	resets = <&reset RESET_SD_EMMC_C>;
 };
 
+&simplefb_hdmi {
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+};
+
 &spicc {
 	clocks = <&clkc CLKID_SPICC>;
 	clock-names = "core";