diff options
| author | Douglas Anderson <dianders@chromium.org> | 2022-08-29 09:49:49 -0700 |
|---|---|---|
| committer | Bjorn Andersson <andersson@kernel.org> | 2022-10-17 13:19:08 -0500 |
| commit | a4543e21ae363f4f094fb3c3503d77029e0c5d90 (patch) | |
| tree | 1391a8cc9641be5ccfaa49a669dc1c758763dc3b /arch/arm64 | |
| parent | 09a1710b3e12e7ac8d871506bc395a9e8a0f63d6 (diff) | |
| download | linux-a4543e21ae363f4f094fb3c3503d77029e0c5d90.tar.bz2 | |
arm64: dts: qcom: sc8280xp-crd: Specify which LDO modes are allowed
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes".
Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
get_optimum_mode(), not set_load()") the above meant that we were able
to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
be stuck at the initial mode. Discussion of this has resulted in the
decision that the old dts files were wrong and should be fixed to
fully restore old functionality.
Let's re-enable the old functionality by fixing the dts.
[1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220829094903.v2.3.Ie7d2c50d2b42ef2d364f3a0c8e300e5ce1875b79@changeid
Diffstat (limited to 'arch/arm64')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index fea7d8273ccd..5e30349efd20 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -124,6 +124,9 @@ regulator-max-microvolt = <2504000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l13c: ldo13 { @@ -146,6 +149,9 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = + <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l4d: ldo4 { |