diff options
author | Arnd Bergmann <arnd@arndb.de> | 2019-09-04 17:01:12 +0200 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2019-09-04 17:01:12 +0200 |
commit | 3563b7830f2826dd77d611fa32b30f763964fcfc (patch) | |
tree | c11ac30cce88030c2b6f4b1802dfc363bc12efd8 /arch/arm64 | |
parent | ffcd65a55011ecc8126cc657c002cd801412fa5b (diff) | |
parent | 1dd70853f8131f1674c4496b1d24de7251cad42c (diff) | |
download | linux-3563b7830f2826dd77d611fa32b30f763964fcfc.tar.bz2 |
Merge tag 'qcom-arm64-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 Updates for v5.4
* Add Lenovo Miix 630, HP Envy x2, and Asus Novago TP370QL support
* Assorted cleanups for SDM845 nodes
* Add video nodes, cpu coefficients, adsp, csdp, and
fastrpc nodes for SDM845
* Add coresight for MSM8996, SDM845, and MSM8998
* Misc cleanups on QCS404 and PMS405
* Update memory map for QCS404
* Add wifi rails, update WCSS clocks, and add ADS unit names on QCS404
* Add Longcheer and Samsung Galaxy A3U/A5U support
* Add initial support for SM8150 and PM8150
* tag 'qcom-arm64-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits)
arm64: dts: sdm845: Add parent clock for rpmhcc
arm64: dts: qcom: sm8150: Add apps shared nodes
arm64: dts: qcom: sm8150: Add reserved-memory regions
arm64: dts: qcom: sm8150-mtp: Add regulators
arm64: dts: qcom: sm8150-mtp: Add base dts file
arm64: dts: qcom: pm8150l: Add base dts file
arm64: dts: qcom: pm8150b: Add base dts file
arm64: dts: qcom: pm8150: Add base dts file
arm64: dts: qcom: sm8150: Add base dts file
arm64: sdm845: add adsp and cdsp fastrpc nodes
arm64: dts: sdm845: Add dynamic CPU power coefficients
arm64: dts: qcom: qcs404: Update memory map to v3
arm64: dts: qcom: qcs404-evb: Mark WCSS clocks protected
arm64: dts: qcom: Add device tree for Longcheer L8150
arm64: dts: qcom: Add device tree for Samsung Galaxy A3U/A5U
dt-bindings: qcom: Document bindings for new MSM8916 devices
dt-bindings: vendor-prefixes: Add Longcheer Technology Co., Ltd.
arm64: dts: qcom: msm8996: Add Venus video codec DT node
arm64: dts: qcom: Extend AOSS QMP node
arm64: dts: qcom: msm8996: Add Coresight support
...
Diffstat (limited to 'arch/arm64')
22 files changed, 3725 insertions, 209 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 0a7e5dfce6f7..085d4c31b143 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -3,14 +3,21 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts new file mode 100644 index 000000000000..2b28e383fd0b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916.dtsi" +#include "pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Longcheer L8150"; + compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + sdhci@7824000 { + status = "okay"; + + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + }; + + sdhci@7864000 { + status = "okay"; + + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + non-removable; + }; + + serial@78b0000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + + usb@78d9000 { + status = "okay"; + dr_mode = "peripheral"; + extcon = <&usb_vbus>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy { + extcon = <&usb_vbus>; + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; + }; + }; + }; + + /* + * Attempting to enable these devices causes a "synchronous + * external abort". Suspected cause is that the debug power + * domain is not enabled by default on this device. + * Disable these devices for now to avoid the crash. + * + * See: https://lore.kernel.org/linux-arm-msm/20190618202623.GA53651@gerhold.net/ + */ + tpiu@820000 { status = "disabled"; }; + funnel@821000 { status = "disabled"; }; + replicator@824000 { status = "disabled"; }; + etf@825000 { status = "disabled"; }; + etr@826000 { status = "disabled"; }; + funnel@841000 { status = "disabled"; }; + debug@850000 { status = "disabled"; }; + debug@852000 { status = "disabled"; }; + debug@854000 { status = "disabled"; }; + debug@856000 { status = "disabled"; }; + etm@85c000 { status = "disabled"; }; + etm@85d000 { status = "disabled"; }; + etm@85e000 { status = "disabled"; }; + etm@85f000 { status = "disabled"; }; + }; + + // FIXME: Use extcon device provided by charger driver when available + usb_vbus: usb-vbus { + compatible = "linux,extcon-usb-gpio"; + vbus-gpio = <&msmgpio 62 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_vbus_default>; + }; +}; + +&msmgpio { + usb_vbus_default: usb-vbus-default { + pinmux { + function = "gpio"; + pins = "gpio62"; + }; + pinconf { + pins = "gpio62"; + bias-pull-up; + }; + }; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1300000>; + }; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1287500>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi new file mode 100644 index 000000000000..e675ff48fdd2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916.dtsi" +#include "pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + sdhci@7824000 { + status = "okay"; + + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + }; + + sdhci@7864000 { + status = "okay"; + + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + }; + + serial@78b0000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + + usb@78d9000 { + status = "okay"; + extcon = <&muic>, <&muic>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy { + extcon = <&muic>; + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; + }; + }; + }; + + /* + * Attempting to enable these devices causes a "synchronous + * external abort". Suspected cause is that the debug power + * domain is not enabled by default on this device. + * Disable these devices for now to avoid the crash. + * + * See: https://lore.kernel.org/linux-arm-msm/20190618202623.GA53651@gerhold.net/ + */ + tpiu@820000 { status = "disabled"; }; + funnel@821000 { status = "disabled"; }; + replicator@824000 { status = "disabled"; }; + etf@825000 { status = "disabled"; }; + etr@826000 { status = "disabled"; }; + funnel@841000 { status = "disabled"; }; + debug@850000 { status = "disabled"; }; + debug@852000 { status = "disabled"; }; + debug@854000 { status = "disabled"; }; + debug@856000 { status = "disabled"; }; + etm@85c000 { status = "disabled"; }; + etm@85d000 { status = "disabled"; }; + etm@85e000 { status = "disabled"; }; + etm@85f000 { status = "disabled"; }; + }; + + i2c-muic { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + #address-cells = <1>; + #size-cells = <0>; + + muic: sm5502@25 { + compatible = "siliconmitus,sm5502-muic"; + + reg = <0x25>; + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default>; + }; + }; +}; + +&msmgpio { + muic_int_default: muic_int_default { + pinmux { + function = "gpio"; + pins = "gpio12"; + }; + pinconf { + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + }; + }; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1300000>; + }; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1287500>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts new file mode 100644 index 000000000000..d10f7ac5089f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-a2015-common.dtsi" + +/ { + model = "Samsung Galaxy A3U (EUR)"; + compatible = "samsung,a3u-eur", "qcom,msm8916"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts new file mode 100644 index 000000000000..1aa59da98495 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-a2015-common.dtsi" + +/ { + model = "Samsung Galaxy A5U (EUR)"; + compatible = "samsung,a5u-eur", "qcom,msm8916"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 96c0a481f454..87f4d9c1b0d4 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -633,6 +633,474 @@ reg = <0x300000 0x90000>; }; + stm@3002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x3002000 0x1000>, + <0x8280000 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = + <&funnel0_in>; + }; + }; + }; + }; + + tpiu@3020000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x3020000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = + <&replicator_out1>; + }; + }; + }; + }; + + funnel@3021000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3021000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in: endpoint { + remote-endpoint = + <&stm_out>; + }; + }; + }; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + }; + + funnel@3022000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3022000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + funnel1_in: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; + }; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = + <&merge_funnel_in1>; + }; + }; + }; + }; + + funnel@3023000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3023000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = + <&merge_funnel_in2>; + }; + }; + }; + }; + + funnel@3025000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3025000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = + <&funnel1_out>; + }; + }; + + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = + <&funnel2_out>; + }; + }; + }; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = + <&etf_in>; + }; + }; + }; + }; + + replicator@3026000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x3026000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = + <&etf_out>; + }; + }; + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = + <&etr_in>; + }; + }; + + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = + <&tpiu_in>; + }; + }; + }; + }; + + etf@3027000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x3027000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + }; + + etr@3028000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x3028000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out0>; + }; + }; + }; + }; + + debug@3810000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3810000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + }; + + etm@3840000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3840000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel0_in0>; + }; + }; + }; + }; + + debug@3910000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3910000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + }; + + etm@3940000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3940000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel0_in1>; + }; + }; + }; + }; + + funnel@39b0000 { /* APSS Funnel 0 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x39b0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel0_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel0_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + }; + + out-ports { + port { + apss_funnel0_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in0>; + }; + }; + }; + }; + + debug@3a10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3a10000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + }; + + etm@3a40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3a40000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel1_in0>; + }; + }; + }; + }; + + debug@3b10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3b10000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + }; + + etm@3b40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3b40000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel1_in1>; + }; + }; + }; + }; + + funnel@3bb0000 { /* APSS Funnel 1 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3bb0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel1_in0: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel1_in1: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + apss_funnel1_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in1>; + }; + }; + }; + }; + + funnel@3bc0000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3bc0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_merge_funnel_in0: endpoint { + remote-endpoint = + <&apss_funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_merge_funnel_in1: endpoint { + remote-endpoint = + <&apss_funnel1_out>; + }; + }; + }; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel1_in>; + }; + }; + }; + }; + kryocc: clock-controller@6400000 { compatible = "qcom,apcc-msm8996"; reg = <0x6400000 0x90000>; @@ -1163,7 +1631,7 @@ }; }; - vfe_smmu: arm,smmu@da0000 { + vfe_smmu: iommu@da0000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; reg = <0xda0000 0x10000>; @@ -1314,7 +1782,7 @@ }; }; - adreno_smmu: arm,smmu@b40000 { + adreno_smmu: iommu@b40000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; reg = <0xb40000 0x10000>; @@ -1331,7 +1799,7 @@ power-domains = <&mmcc GPU_GDSC>; }; - mdp_smmu: arm,smmu@d00000 { + mdp_smmu: iommu@d00000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; reg = <0xd00000 0x10000>; @@ -1347,7 +1815,7 @@ power-domains = <&mmcc MDSS_GDSC>; }; - lpass_q6_smmu: arm,smmu-lpass_q6@1600000 { + lpass_q6_smmu: iommu@1600000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; reg = <0x1600000 0x20000>; #iommu-cells = <1>; @@ -1794,6 +2262,74 @@ "ref"; }; }; + + venus_smmu: arm,smmu-venus@d40000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0xd40000 0x20000>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mmcc MMAGIC_VIDEO_GDSC>; + clocks = <&mmcc SMMU_VIDEO_AHB_CLK>, + <&mmcc SMMU_VIDEO_AXI_CLK>; + clock-names = "iface", "bus"; + #iommu-cells = <1>; + status = "okay"; + }; + + video-codec@c00000 { + compatible = "qcom,msm8996-venus"; + reg = <0x00c00000 0xff000>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mmcc VENUS_GDSC>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc VIDEO_MAXI_CLK>; + clock-names = "core", "iface", "bus", "mbus"; + iommus = <&venus_smmu 0x00>, + <&venus_smmu 0x01>, + <&venus_smmu 0x0a>, + <&venus_smmu 0x07>, + <&venus_smmu 0x0e>, + <&venus_smmu 0x0f>, + <&venus_smmu 0x08>, + <&venus_smmu 0x09>, + <&venus_smmu 0x0b>, + <&venus_smmu 0x0c>, + <&venus_smmu 0x0d>, + <&venus_smmu 0x10>, + <&venus_smmu 0x11>, + <&venus_smmu 0x21>, + <&venus_smmu 0x28>, + <&venus_smmu 0x29>, + <&venus_smmu 0x2b>, + <&venus_smmu 0x2c>, + <&venus_smmu 0x2d>, + <&venus_smmu 0x31>; + memory-region = <&venus_region>; + status = "okay"; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE1_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE1_GDSC>; + }; + }; }; sound: sound { diff --git a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts new file mode 100644 index 000000000000..db5821be1e2f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-clamshell.dtsi" + +/ { + model = "Asus NovaGo TP370QL"; + compatible = "asus,novago-tp370ql", "qcom,msm8998"; +}; + +&blsp1_i2c6 { + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + interrupt-parent = <&tlmm>; + interrupts = <0x7b IRQ_TYPE_LEVEL_LOW>; + reg = <0x15>; + hid-descr-addr = <0x0001>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchpad>; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + interrupt-parent = <&tlmm>; + interrupts = <0x25 IRQ_TYPE_LEVEL_LOW>; + reg = <0x3a>; + hid-descr-addr = <0x0001>; + }; +}; + +&sdhc2 { + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + touchpad: touchpad { + config { + pins = "gpio123"; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi new file mode 100644 index 000000000000..9682d4dd7496 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/* + * Common include for MSM8998 clamshell devices, ie the Lenovo Miix 630, + * Asus NovaGo TP370QL, and HP Envy x2. All three devices are basically the + * same, with differences in peripherals. + */ + +#include "msm8998.dtsi" +#include "pm8998.dtsi" +#include "pm8005.dtsi" + +/ { + chosen { + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vph_pwr>; + vdd_l10_l23_l25-supply = <&vph_pwr>; + vdd_l13_l19_l21-supply = <&vph_pwr>; + vdd_l16_l28-supply = <&vph_pwr>; + vdd_l18_l22-supply = <&vph_pwr>; + vdd_l20_l24-supply = <&vph_pwr>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-allow-set-load; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + vreg_15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + touchpad: touchpad { + config { + pins = "gpio123"; + bias-pull-up; /* pull up */ + }; + }; +}; + +&sdhc2 { + status = "okay"; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "host"; /* Force to host until we have Type-C hooked up */ +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts new file mode 100644 index 000000000000..24073127091f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-clamshell.dtsi" + +/ { + model = "HP Envy x2"; + compatible = "hp,envy-x2", "qcom,msm8998"; +}; + +&blsp1_i2c6 { + status = "okay"; + + keyboard@3a { + compatible = "hid-over-i2c"; + interrupt-parent = <&tlmm>; + interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>; + reg = <0x3a>; + hid-descr-addr = <0x0001>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchpad>; + }; +}; + +&sdhc2 { + cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts new file mode 100644 index 000000000000..407c6a32911c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-clamshell.dtsi" + +/ { + model = "Lenovo Miix 630"; + compatible = "lenovo,miix-630", "qcom,msm8998"; +}; + +&blsp1_i2c6 { + status = "okay"; + + keyboard@3a { + compatible = "hid-over-i2c"; + interrupt-parent = <&tlmm>; + interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>; + reg = <0x3a>; + hid-descr-addr = <0x0001>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchpad>; + }; +}; + +&sdhc2 { + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index c13ed7aeb1e0..c6f81431983e 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -787,14 +787,22 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; - rpm_msg_ram: memory@68000 { + gcc: clock-controller@100000 { + compatible = "qcom,gcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00100000 0xb0000>; + }; + + rpm_msg_ram: memory@778000 { compatible = "qcom,rpm-msg-ram"; - reg = <0x778000 0x7000>; + reg = <0x00778000 0x7000>; }; qfprom: qfprom@780000 { compatible = "qcom,qfprom"; - reg = <0x780000 0x621c>; + reg = <0x00780000 0x621c>; #address-cells = <1>; #size-cells = <1>; @@ -804,47 +812,10 @@ }; }; - gcc: clock-controller@100000 { - compatible = "qcom,gcc-msm8998"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0x100000 0xb0000>; - }; - - tlmm: pinctrl@3400000 { - compatible = "qcom,msm8998-pinctrl"; - reg = <0x3400000 0xc00000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <0x2>; - interrupt-controller; - #interrupt-cells = <0x2>; - }; - - spmi_bus: spmi@800f000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x800f000 0x1000>, - <0x8400000 0x1000000>, - <0x9400000 0x1000000>, - <0xa400000 0x220000>, - <0x800a000 0x3000>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - cell-index = <0>; - }; - tsens0: thermal@10ab000 { compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; - reg = <0x10ab000 0x1000>, /* TM */ - <0x10aa000 0x1000>; /* SROT */ + reg = <0x010ab000 0x1000>, /* TM */ + <0x010aa000 0x1000>; /* SROT */ #qcom,sensors = <14>; #thermal-sensor-cells = <1>; @@ -852,8 +823,8 @@ tsens1: thermal@10ae000 { compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; - reg = <0x10ae000 0x1000>, /* TM */ - <0x10ad000 0x1000>; /* SROT */ + reg = <0x010ae000 0x1000>, /* TM */ + <0x010ad000 0x1000>; /* SROT */ #qcom,sensors = <8>; #thermal-sensor-cells = <1>; @@ -943,16 +914,542 @@ }; }; + ufshc: ufshc@1da4000 { + compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x01da4000 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufsphy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + power-domains = <&gcc UFS_GDSC>; + #reset-cells = <1>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE1_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_LN_BB_CLK1>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + resets = <&gcc GCC_UFS_BCR>; + reset-names = "rst"; + }; + + ufsphy: phy@1da7000 { + compatible = "qcom,msm8998-qmp-ufs-phy"; + reg = <0x01da7000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock-names = + "ref", + "ref_aux"; + clocks = + <&gcc GCC_UFS_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_AUX_CLK>; + + reset-names = "ufsphy"; + resets = <&ufshc 0>; + + ufsphy_lanes: lanes@1da7400 { + reg = <0x01da7400 0x128>, + <0x01da7600 0x1fc>, + <0x01da7c00 0x1dc>, + <0x01da7800 0x128>, + <0x01da7a00 0x1fc>; + #phy-cells = <0>; + }; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; - reg = <0x1f40000 0x20000>; + reg = <0x01f40000 0x20000>; }; - apcs_glb: mailbox@9820000 { - compatible = "qcom,msm8998-apcs-hmss-global"; - reg = <0x17911000 0x1000>; + tlmm: pinctrl@3400000 { + compatible = "qcom,msm8998-pinctrl"; + reg = <0x03400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + }; - #mbox-cells = <1>; + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x06002000 0x1000>, + <0x16280000 0x180000>; + reg-names = "stm-base", "stm-data-base"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x06041000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x06042000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = + <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + funnel1_in6: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x06045000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = + <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = + <&funnel1_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x06046000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x06047000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x06048000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out>; + }; + }; + }; + }; + + etm@7840000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07840000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7940000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07940000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7a40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07a40000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7b40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07b40000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel_in3>; + }; + }; + }; + }; + + funnel@7b60000 { /* APSS Funnel */ + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07b60000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = + <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = + <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = + <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = + <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = + <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = + <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = + <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + funnel@7b70000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x07b70000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel1_in6>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = + <&apss_funnel_out>; + }; + }; + }; + }; + + etm@7c40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07c40000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU4>; + + port{ + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + + etm@7d40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07d40000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU5>; + + port{ + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + + etm@7e40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07e40000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU6>; + + port{ + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + + etm@7f40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07f40000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU7>; + + port{ + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + + spmi_bus: spmi@800f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0800f000 0x1000>, + <0x08400000 0x1000000>, + <0x09400000 0x1000000>, + <0x0a400000 0x220000>, + <0x0800a000 0x3000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; }; usb3: usb@a8f8800 { @@ -1044,7 +1541,7 @@ sdhc2: sdhci@c0a4900 { compatible = "qcom,sdhci-msm-v4"; - reg = <0xc0a4900 0x314>, <0xc0a4000 0x800>; + reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, @@ -1149,6 +1646,16 @@ #size-cells = <0>; }; + blsp2_uart1: serial@c1b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c1b0000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp2_i2c0: i2c@c1b5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b5000 0x600>; @@ -1239,14 +1746,11 @@ #size-cells = <0>; }; - blsp2_uart1: serial@c1b0000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xc1b0000 0x1000>; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; + apcs_glb: mailbox@17911000 { + compatible = "qcom,msm8998-apcs-hmss-global"; + reg = <0x17911000 0x1000>; + + #mbox-cells = <1>; }; timer@17920000 { @@ -1320,75 +1824,6 @@ redistributor-stride = <0x0 0x20000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; - - ufshc: ufshc@1da4000 { - compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0x01da4000 0x2500>; - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufsphy_lanes>; - phy-names = "ufsphy"; - lanes-per-direction = <2>; - power-domains = <&gcc UFS_GDSC>; - #reset-cells = <1>; - - clock-names = - "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; - clocks = - <&gcc GCC_UFS_AXI_CLK>, - <&gcc GCC_AGGRE1_UFS_AXI_CLK>, - <&gcc GCC_UFS_AHB_CLK>, - <&gcc GCC_UFS_UNIPRO_CORE_CLK>, - <&rpmcc RPM_SMD_LN_BB_CLK1>, - <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; - freq-table-hz = - <50000000 200000000>, - <0 0>, - <0 0>, - <37500000 150000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; - - resets = <&gcc GCC_UFS_BCR>; - reset-names = "rst"; - }; - - ufsphy: phy@1da7000 { - compatible = "qcom,msm8998-qmp-ufs-phy"; - reg = <0x01da7000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clock-names = - "ref", - "ref_aux"; - clocks = - <&gcc GCC_UFS_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_AUX_CLK>; - - reset-names = "ufsphy"; - resets = <&ufshc 0>; - - ufsphy_lanes: lanes@1da7400 { - reg = <0x01da7400 0x128>, - <0x01da7600 0x1fc>, - <0x01da7c00 0x1dc>, - <0x01da7800 0x128>, - <0x01da7a00 0x1fc>; - #phy-cells = <0>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi new file mode 100644 index 000000000000..b6e304748a57 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> + +&spmi_bus { + pm8150_0: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon: power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + + status = "disabled"; + }; + }; + + pm8150_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + status = "disabled"; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + + status = "disabled"; + }; + + pm8150_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>, + <0x0 0xc1 0x0 IRQ_TYPE_NONE>, + <0x0 0xc2 0x0 IRQ_TYPE_NONE>, + <0x0 0xc3 0x0 IRQ_TYPE_NONE>, + <0x0 0xc4 0x0 IRQ_TYPE_NONE>, + <0x0 0xc5 0x0 IRQ_TYPE_NONE>, + <0x0 0xc6 0x0 IRQ_TYPE_NONE>, + <0x0 0xc7 0x0 IRQ_TYPE_NONE>, + <0x0 0xc8 0x0 IRQ_TYPE_NONE>, + <0x0 0xc9 0x0 IRQ_TYPE_NONE>, + <0x0 0xca 0x0 IRQ_TYPE_NONE>, + <0x0 0xcb 0x0 IRQ_TYPE_NONE>; + }; + }; + + pmic@1 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi new file mode 100644 index 000000000000..322379d5c31f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@2 { + compatible = "qcom,pm8150b", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + status = "disabled"; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + chg-temp@9 { + reg = <ADC5_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + }; + + pm8150b_gpios: gpio@c000 { + compatible = "qcom,pm8150b-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>, + <0x2 0xc1 0x0 IRQ_TYPE_NONE>, + <0x2 0xc2 0x0 IRQ_TYPE_NONE>, + <0x2 0xc3 0x0 IRQ_TYPE_NONE>, + <0x2 0xc4 0x0 IRQ_TYPE_NONE>, + <0x2 0xc5 0x0 IRQ_TYPE_NONE>, + <0x2 0xc6 0x0 IRQ_TYPE_NONE>, + <0x2 0xc7 0x0 IRQ_TYPE_NONE>, + <0x2 0xc8 0x0 IRQ_TYPE_NONE>, + <0x2 0xc9 0x0 IRQ_TYPE_NONE>, + <0x2 0xca 0x0 IRQ_TYPE_NONE>, + <0x2 0xcb 0x0 IRQ_TYPE_NONE>; + }; + }; + + pmic@3 { + compatible = "qcom,pm8150b", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi new file mode 100644 index 000000000000..eb0e9a090e42 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@4 { + compatible = "qcom,pm8150l", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + status = "disabled"; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pm8150l_gpios: gpio@c000 { + compatible = "qcom,pm8150l-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>, + <0x4 0xc1 0x0 IRQ_TYPE_NONE>, + <0x4 0xc2 0x0 IRQ_TYPE_NONE>, + <0x4 0xc3 0x0 IRQ_TYPE_NONE>, + <0x4 0xc4 0x0 IRQ_TYPE_NONE>, + <0x4 0xc5 0x0 IRQ_TYPE_NONE>, + <0x4 0xc6 0x0 IRQ_TYPE_NONE>, + <0x4 0xc7 0x0 IRQ_TYPE_NONE>, + <0x4 0xc8 0x0 IRQ_TYPE_NONE>, + <0x4 0xc9 0x0 IRQ_TYPE_NONE>, + <0x4 0xca 0x0 IRQ_TYPE_NONE>, + <0x4 0xcb 0x0 IRQ_TYPE_NONE>; + }; + }; + + pmic@5 { + compatible = "qcom,pm8150l", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 051a52df80f9..dc2ce23cde05 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -78,7 +78,7 @@ #size-cells = <0>; #io-channel-cells = <1>; - adc-chan@ADC5_DIE_TEMP { + adc-chan@6 { reg = <ADC5_DIE_TEMP>; label = "die_temp"; }; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index 14240fedd916..ff4005186895 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -88,41 +88,41 @@ #size-cells = <0>; #io-channel-cells = <1>; - ref_gnd { + ref_gnd@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; }; - vref_1p25 { + vref_1p25@1 { reg = <ADC5_1P25VREF>; qcom,pre-scaling = <1 1>; }; - pon_1: vph_pwr { + pon_1: vph_pwr@131 { reg = <ADC5_VPH_PWR>; qcom,pre-scaling = <1 3>; }; - die_temp { + die_temp@6 { reg = <ADC5_DIE_TEMP>; qcom,pre-scaling = <1 1>; }; - pa_therm1: thermistor1 { + pa_therm1: thermistor1@77 { reg = <ADC5_AMUX_THM1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; - pa_therm3: thermistor3 { + pa_therm3: thermistor3@79 { reg = <ADC5_AMUX_THM3_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; - xo_therm: xo_temp { + xo_therm: xo_temp@76 { reg = <ADC5_XO_THERM_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -141,8 +141,6 @@ pms405_1: pms405@1 { compatible = "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; pms405_spmi_regulators: regulators { compatible = "qcom,pms405-regulators"; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 11c0a7137823..501a7330dbc8 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -61,7 +61,9 @@ protected-clocks = <GCC_BIMC_CDSP_CLK>, <GCC_CDSP_CFG_AHB_CLK>, <GCC_CDSP_BIMC_CLK_SRC>, - <GCC_CDSP_TBU_CLK>; + <GCC_CDSP_TBU_CLK>, + <141>, /* GCC_WCSS_Q6_AHB_CLK */ + <142>; /* GCC_WCSS_Q6_AXIM_CLK */ }; &pms405_spmi_regulators { @@ -270,6 +272,9 @@ &wifi { status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>; + vdd-1.8-xo-supply = <&vreg_l5_1p8>; + vdd-1.3-rfa-supply = <&vreg_l1_1p3>; }; /* PINCTRL - additions to nodes defined in qcs404.dtsi */ diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 3d0789775009..a97eeb4569c0 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -111,8 +111,13 @@ #size-cells = <2>; ranges; - memory@85600000 { - reg = <0 0x85600000 0 0x90000>; + tz_apps_mem: memory@85900000 { + reg = <0 0x85900000 0 0x500000>; + no-map; + }; + + xbl_mem: memory@85e00000 { + reg = <0 0x85e00000 0 0x100000>; no-map; }; @@ -121,28 +126,33 @@ no-map; }; - memory@86100000 { + tz_mem: memory@86100000 { reg = <0 0x86100000 0 0x300000>; no-map; }; wlan_fw_mem: memory@86400000 { - reg = <0 0x86400000 0 0x1c00000>; + reg = <0 0x86400000 0 0x1100000>; + no-map; + }; + + adsp_fw_mem: memory@87500000 { + reg = <0 0x87500000 0 0x1a00000>; no-map; }; - adsp_fw_mem: memory@88000000 { - reg = <0 0x88000000 0 0x1a00000>; + cdsp_fw_mem: memory@88f00000 { + reg = <0 0x88f00000 0 0x600000>; no-map; }; - cdsp_fw_mem: memory@89a00000 { - reg = <0 0x89a00000 0 0x600000>; + wlan_msa_mem: memory@89500000 { + reg = <0 0x89500000 0 0x100000>; no-map; }; - wlan_msa_mem: memory@8a000000 { - reg = <0 0x8a000000 0 0x100000>; + uefi_mem: memory@9f800000 { + reg = <0 0x9f800000 0 0x800000>; no-map; }; }; @@ -1077,7 +1087,7 @@ thermal-sensors = <&tsens 0>; trips { - aoss_alert0: trip-point@0 { + aoss_alert0: trip-point0 { temperature = <105000>; hysteresis = <2000>; type = "hot"; @@ -1092,7 +1102,7 @@ thermal-sensors = <&tsens 1>; trips { - q6_hvx_alert0: trip-point@0 { + q6_hvx_alert0: trip-point0 { temperature = <105000>; hysteresis = <2000>; type = "hot"; @@ -1107,7 +1117,7 @@ thermal-sensors = <&tsens 2>; trips { - lpass_alert0: trip-point@0 { + lpass_alert0: trip-point0 { temperature = <105000>; hysteresis = <2000>; type = "hot"; @@ -1122,7 +1132,7 @@ thermal-sensors = <&tsens 3>; trips { - wlan_alert0: trip-point@0 { + wlan_alert0: trip-point0 { temperature = <105000>; hysteresis = <2000>; type = "hot"; @@ -1137,12 +1147,12 @@ thermal-sensors = <&tsens 4>; trips { - cluster_alert0: trip-point@0 { + cluster_alert0: trip-point0 { temperature = <95000>; hysteresis = <2000>; type = "hot"; }; - cluster_alert1: trip-point@1 { + cluster_alert1: trip-point1 { temperature = <105000>; hysteresis = <2000>; type = "passive"; @@ -1171,12 +1181,12 @@ thermal-sensors = <&tsens 5>; trips { - cpu0_alert0: trip-point@0 { + cpu0_alert0: trip-point0 { temperature = <95000>; hysteresis = <2000>; type = "hot"; }; - cpu0_alert1: trip-point@1 { + cpu0_alert1: trip-point1 { temperature = <105000>; hysteresis = <2000>; type = "passive"; @@ -1205,12 +1215,12 @@ thermal-sensors = <&tsens 6>; trips { - cpu1_alert0: trip-point@0 { + cpu1_alert0: trip-point0 { temperature = <95000>; hysteresis = <2000>; type = "hot"; }; - cpu1_alert1: trip-point@1 { + cpu1_alert1: trip-point1 { temperature = <105000>; hysteresis = <2000>; type = "passive"; @@ -1239,12 +1249,12 @@ thermal-sensors = <&tsens 7>; trips { - cpu2_alert0: trip-point@0 { + cpu2_alert0: trip-point0 { temperature = <95000>; hysteresis = <2000>; type = "hot"; }; - cpu2_alert1: trip-point@1 { + cpu2_alert1: trip-point1 { temperature = <105000>; hysteresis = <2000>; type = "passive"; @@ -1273,12 +1283,12 @@ thermal-sensors = <&tsens 8>; trips { - cpu3_alert0: trip-point@0 { + cpu3_alert0: trip-point0 { temperature = <95000>; hysteresis = <2000>; type = "hot"; }; - cpu3_alert1: trip-point@1 { + cpu3_alert1: trip-point1 { temperature = <105000>; hysteresis = <2000>; type = "passive"; @@ -1307,7 +1317,7 @@ thermal-sensors = <&tsens 9>; trips { - gpu_alert0: trip-point@0 { + gpu_alert0: trip-point0 { temperature = <95000>; hysteresis = <2000>; type = "hot"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 1ebbd568dfd7..34881c0113cb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -745,7 +745,7 @@ ap_ts_i2c: &i2c14 { * All the hardware muxes would allow us to hook things up in different * ways to some potential benefit for static configurations (you could * achieve extra USB2 bandwidth by using two different ports for the - * two conenctors or possibly even get USB3 peripheral mode), but in + * two connectors or possibly even get USB3 peripheral mode), but in * each case you end up forcing to disconnect/reconnect an in-use * USB session in some cases depending on what you hotplug into the * other connector. Thus hardcoding this as peripheral makes sense. @@ -963,27 +963,27 @@ ap_ts_i2c: &i2c14 { }; &pm8998_adc { - adc-chan@ADC5_AMUX_THM1_100K_PU { + adc-chan@4d { reg = <ADC5_AMUX_THM1_100K_PU>; label = "sdm_temp"; }; - adc-chan@ADC5_AMUX_THM2_100K_PU { + adc-chan@4e { reg = <ADC5_AMUX_THM2_100K_PU>; label = "quiet_temp"; }; - adc-chan@ADC5_AMUX_THM3_100K_PU { + adc-chan@4f { reg = <ADC5_AMUX_THM3_100K_PU>; label = "lte_temp_1"; }; - adc-chan@ADC5_AMUX_THM4_100K_PU { + adc-chan@50 { reg = <ADC5_AMUX_THM4_100K_PU>; label = "lte_temp_2"; }; - adc-chan@ADC5_AMUX_THM5_100K_PU { + adc-chan@51 { reg = <ADC5_AMUX_THM5_100K_PU>; label = "charger_temp"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 4babff5f19b5..f406a4340b05 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -194,6 +194,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; + dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_0>; @@ -215,6 +216,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; + dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_100>; @@ -233,6 +235,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; + dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_200>; @@ -251,6 +254,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; + dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_300>; @@ -269,6 +273,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; + dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_400>; @@ -287,6 +292,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; + dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_500>; @@ -305,6 +311,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; + dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_600>; @@ -323,6 +330,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; + dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_700>; @@ -483,6 +491,25 @@ label = "lpass"; qcom,remote-pid = <2>; mboxes = <&apss_shared 8>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1823 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1824 0x0>; + }; + }; }; }; @@ -512,6 +539,61 @@ label = "turing"; qcom,remote-pid = <5>; mboxes = <&apss_shared 4>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1401 0x30>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1402 0x30>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1403 0x30>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1404 0x30>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1405 0x30>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1406 0x30>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1407 0x30>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1408 0x30>; + }; + }; }; }; @@ -620,7 +702,7 @@ method = "smc"; }; - soc: soc { + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; ranges = <0 0 0 0 0x10 0>; @@ -1275,6 +1357,13 @@ }; }; + cache-controller@1100000 { + compatible = "qcom,sdm845-llcc"; + reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -1815,6 +1904,457 @@ clock-names = "xo"; }; + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = + <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6043000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06043000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = + <&merge_funnel_in2>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@5 { + reg = <5>; + funnel2_in5: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = + <&funnel2_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06047000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = + <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = + <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = + <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = + <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = + <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = + <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = + <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel2_in5>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = + <&apss_funnel_out>; + }; + }; + }; + }; + sdhc_2: sdhci@8804000 { compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -2027,6 +2567,36 @@ }; }; + video-codec@aa00000 { + compatible = "qcom,sdm845-venus"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&videocc VENUS_GDSC>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>; + clock-names = "core", "iface", "bus"; + iommus = <&apps_smmu 0x10a0 0x8>, + <&apps_smmu 0x10b0 0x0>; + memory-region = <&venus_mem>; + + video-core0 { + compatible = "venus-decoder"; + clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC0_GDSC>; + }; + + video-core1 { + compatible = "venus-encoder"; + clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC1_GDSC>; + }; + }; + videocc: clock-controller@ab00000 { compatible = "qcom,sdm845-videocc"; reg = <0 0x0ab00000 0 0x10000>; @@ -2131,9 +2701,6 @@ status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -2198,9 +2765,6 @@ status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -2411,6 +2975,14 @@ #clock-cells = <0>; #power-domain-cells = <1>; + + cx_cdev: cx { + #cooling-cells = <2>; + }; + + ebi_cdev: ebi { + #cooling-cells = <2>; + }; }; spmi_bus: spmi@c440000 { @@ -2538,6 +3110,8 @@ rpmhcc: clock-controller { compatible = "qcom,sdm845-rpmh-clk"; #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; }; rpmhpd: power-controller { @@ -2718,13 +3292,13 @@ thermal-sensors = <&tsens0 1>; trips { - cpu0_alert0: trip-point@0 { + cpu0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu0_alert1: trip-point@1 { + cpu0_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2762,13 +3336,13 @@ thermal-sensors = <&tsens0 2>; trips { - cpu1_alert0: trip-point@0 { + cpu1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu1_alert1: trip-point@1 { + cpu1_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2806,13 +3380,13 @@ thermal-sensors = <&tsens0 3>; trips { - cpu2_alert0: trip-point@0 { + cpu2_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu2_alert1: trip-point@1 { + cpu2_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2850,13 +3424,13 @@ thermal-sensors = <&tsens0 4>; trips { - cpu3_alert0: trip-point@0 { + cpu3_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu3_alert1: trip-point@1 { + cpu3_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2894,13 +3468,13 @@ thermal-sensors = <&tsens0 7>; trips { - cpu4_alert0: trip-point@0 { + cpu4_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu4_alert1: trip-point@1 { + cpu4_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2938,13 +3512,13 @@ thermal-sensors = <&tsens0 8>; trips { - cpu5_alert0: trip-point@0 { + cpu5_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu5_alert1: trip-point@1 { + cpu5_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2982,13 +3556,13 @@ thermal-sensors = <&tsens0 9>; trips { - cpu6_alert0: trip-point@0 { + cpu6_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu6_alert1: trip-point@1 { + cpu6_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -3026,13 +3600,13 @@ thermal-sensors = <&tsens0 10>; trips { - cpu7_alert0: trip-point@0 { + cpu7_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu7_alert1: trip-point@1 { + cpu7_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -3070,7 +3644,7 @@ thermal-sensors = <&tsens0 0>; trips { - aoss0_alert0: trip-point@0 { + aoss0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3085,7 +3659,7 @@ thermal-sensors = <&tsens0 5>; trips { - cluster0_alert0: trip-point@0 { + cluster0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3105,7 +3679,7 @@ thermal-sensors = <&tsens0 6>; trips { - cluster1_alert0: trip-point@0 { + cluster1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3125,7 +3699,7 @@ thermal-sensors = <&tsens0 11>; trips { - gpu1_alert0: trip-point@0 { + gpu1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3140,7 +3714,7 @@ thermal-sensors = <&tsens0 12>; trips { - gpu2_alert0: trip-point@0 { + gpu2_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3155,7 +3729,7 @@ thermal-sensors = <&tsens1 0>; trips { - aoss1_alert0: trip-point@0 { + aoss1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3170,7 +3744,7 @@ thermal-sensors = <&tsens1 1>; trips { - q6_modem_alert0: trip-point@0 { + q6_modem_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3185,7 +3759,7 @@ thermal-sensors = <&tsens1 2>; trips { - mem_alert0: trip-point@0 { + mem_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3200,7 +3774,7 @@ thermal-sensors = <&tsens1 3>; trips { - wlan_alert0: trip-point@0 { + wlan_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3215,7 +3789,7 @@ thermal-sensors = <&tsens1 4>; trips { - q6_hvx_alert0: trip-point@0 { + q6_hvx_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3230,7 +3804,7 @@ thermal-sensors = <&tsens1 5>; trips { - camera_alert0: trip-point@0 { + camera_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3245,7 +3819,7 @@ thermal-sensors = <&tsens1 6>; trips { - video_alert0: trip-point@0 { + video_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3260,7 +3834,7 @@ thermal-sensors = <&tsens1 7>; trips { - modem_alert0: trip-point@0 { + modem_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts new file mode 100644 index 000000000000..aa5de42fcae4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8150 MTP"; + compatible = "qcom,sm8150-mtp"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8150 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vdda_wcss_pll: + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_pdphy: + vdda_usb_hs_3p1: + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_usb_hs_core: + vdda_csi_0_0p9: + vdda_csi_1_0p9: + vdda_csi_2_0p9: + vdda_csi_3_0p9: + vdda_dsi_0_0p9: + vdda_dsi_1_0p9: + vdda_dsi_0_pll_0p9: + vdda_dsi_1_pll_0p9: + vdda_pcie_1ln_core: + vdda_pcie_2ln_core: + vdda_pll_hv_cc_ebi01: + vdda_pll_hv_cc_ebi23: + vdda_qrefs_0p875_5: + vdda_sp_sensor: + vdda_ufs_2ln_core_1: + vdda_ufs_2ln_core_2: + vdda_usb_ss_dp_core_1: + vdda_usb_ss_dp_core_2: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc_cs_1p8: + vdda_gfx_cs_1p8: + vdda_usb_hs_1p8: + vdda_qrefs_vref_1p8: + vddpx_10_a: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p7: ldo13 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_wcss_adcdac_1: + vdda_wcss_adcdac_22: + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_hv_refgen0: + vdda_qlink_hv_ck: + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_5: + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_6: + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + + vreg_l2f_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5f_2p85: ldo5 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_2p85: ldo6 { + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <2856000>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&pon { + pwrkey { + status = "okay"; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <126 4>; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi new file mode 100644 index 000000000000..8f23fcadecb8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -0,0 +1,482 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/clock/qcom,rpmh.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8150", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@85d00000 { + reg = <0x0 0x85d00000 0x0 0x140000>; + no-map; + }; + + aop_mem: memory@85f00000 { + reg = <0x0 0x85f00000 0x0 0x20000>; + no-map; + }; + + aop_cmd_db: memory@85f20000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85f20000 0x0 0x20000>; + no-map; + }; + + smem_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x3900000>; + no-map; + }; + + rmtfs_mem: memory@89b00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b00000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + camera_mem: memory@8b700000 { + reg = <0x0 0x8b700000 0x0 0x500000>; + no-map; + }; + + wlan_mem: memory@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x180000>; + no-map; + }; + + npu_mem: memory@8bd80000 { + reg = <0x0 0x8bd80000 0x0 0x80000>; + no-map; + }; + + adsp_mem: memory@8be00000 { + reg = <0x0 0x8be00000 0x0 0x1a00000>; + no-map; + }; + + mpss_mem: memory@8d800000 { + reg = <0x0 0x8d800000 0x0 0x9600000>; + no-map; + }; + + venus_mem: memory@96e00000 { + reg = <0x0 0x96e00000 0x0 0x500000>; + no-map; + }; + + slpi_mem: memory@97300000 { + reg = <0x0 0x97300000 0x0 0x1400000>; + no-map; + }; + + ipa_fw_mem: memory@98700000 { + reg = <0x0 0x98700000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@98710000 { + reg = <0x0 0x98710000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@98715000 { + reg = <0x0 0x98715000 0x0 0x2000>; + no-map; + }; + + spss_mem: memory@98800000 { + reg = <0x0 0x98800000 0x0 0x100000>; + no-map; + }; + + cdsp_mem: memory@98900000 { + reg = <0x0 0x98900000 0x0 0x1400000>; + no-map; + }; + + qseecom_mem: memory@9e400000 { + reg = <0x0 0x9e400000 0x0 0x1400000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8150"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", + "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc 123>, + <&gcc 124>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart2: serial@a90000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc 105>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0x0 0x01f40000 0x0 0x40000>; + }; + + tlmm: pinctrl@3100000 { + compatible = "qcom,sm8150-pinctrl"; + reg = <0x0 0x03100000 0x0 0x300000>, + <0x0 0x03500000 0x0 0x300000>, + <0x0 0x03900000 0x0 0x300000>, + <0x0 0x03D00000 0x0 0x300000>; + reg-names = "west", "east", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 175>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm8150-aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x0001100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x0100000>, + <0x0 0x0e700000 0x0 0x00a0000>, + <0x0 0x0c40a000 0x0 0x0026000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + apss_shared: mailbox@17c00000 { + compatible = "qcom,sm8150-apss-shared"; + reg = <0x0 0x17c00000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + timer@17c20000 { + #address-cells = <2>; + #size-cells = <2>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000{ + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c21000 0x0 0x1000>, + <0x0 0x17c22000 0x0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c23000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c25000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c26000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c29000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 1>, + <WAKE_TCS 1>, + <CONTROL_TCS 0>; + + rpmhcc: clock-controller { + compatible = "qcom,sm8150-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; +}; |