Merge tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DT updates for v5.10

Cleanup, refactor and modernize MSM8916 by sorting nodes, moving device
and platform specific parts to their respective files, add and use
labels for reference nodes and use IRQ defines. Migrate TCSR mutex off
the depricated binding, add resin node for PM8916.

Add LPASS clock controller for SC7180. Fix the LLCC reg, increase
interconnect-cells, drop flags on MDSS irqs. Add interconnects for
display, eMMC and SD-card, specify 'sustainable_power' for CPU thermal
zones, improve pinconf states related to UART and Bluetooth. Add new DT
for Lazor and Trogdor.

Increase #interconnect-cells for SDM845 to allow tags, add OPP tables
and power-domains for Venus and interconnects for display. Fix the ports
on the HDMI nodes for DB845c and add DT for the Xiaomi Poco F1.

Add interconnect providers, fix up primary USB's clock and use
dt-binding defines for GPU clocks on SM8150.

Add interconnect providers, CPUfreq, thermal configuration and missing
uarts for SM8250. Fix up naming of debug uart, add always-on supply
clock to gcc, fix up the sleep clock rate and define OPP tables for all
QUP devices. Then add a new DeviceTree for the QRB5165 RB5 board.

Enable watchdog on IPQ8074 and use the appropriate compatible for the
PMU node. Enable DVFS support for IPQ6018.

Finally correct the spelling of "interrupts" in MSM8992 uart node, fix
missing # in PM660 #interrupt-cells, add second VFE power-domain to
camss in MSM8996 and sort the Makefile.

* tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (75 commits)
  arm64: dts: qcom: sm8250: Add thermal zones and throttling support
  arm64: dts: qcom: sm8250: Add cpufreq hw node
  arm64: dts: qcom: sdm845: Add interconnects property for display
  arm64: dts: qcom: sm8250: Add EPSS L3 interconnect provider
  arm64: dts: qcom: sm8150: Add OSM L3 interconnect provider
  arm64: dts: qcom: sm8250: add interconnect nodes
  arm64: dts: qcom: sm8150: add interconnect nodes
  arm64: dts: qcom: sc7180: Increase the number of interconnect cells
  arm64: dts: qcom: sdm845: Increase the number of interconnect cells
  arm64: dts: qcom: Makefile: Sort lines
  arm64: dts: qcom: pm8916: Sort nodes
  arm64: dts: qcom: msm8916: Sort nodes
  arm64: dts: qcom: msm8916: Pad addresses
  arm64: dts: qcom: msm8916: Rename "x-smp2p" to "smp2p-x"
  arm64: dts: qcom: msm8916: Use more generic node names
  arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS
  arm64: dts: qcom: msm8916: Minor style fixes
  arm64: dts: qcom: msm8916: Drop qcom,tcsr-mutex syscon
  arm64: dts: qcom: msm8916: Use IRQ defines, add IRQ types
  arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts
  ...

Link: https://lore.kernel.org/r/20200924040607.180039-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>

36 files changed, 6403 insertions, 2097 deletions

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d8f1466e6758..fb4631f898fd 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,11 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
-dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8150.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a3u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a5u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
@@ -18,7 +18,16 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1-kb.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-ganges-kirin.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
@@ -30,8 +39,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 194343510dcb..3c7f97539390 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -3,38 +3,13 @@
  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
  */
 
-#include "msm8916.dtsi"
-#include "pm8916.dtsi"
+#include "msm8916-pm8916.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 #include <dt-bindings/sound/apq8016-lpass.h>
 
-/*
- * GPIO name legend: proper name = the GPIO line is used as GPIO
- *         NC = not connected (pin out but not routed from the chip to
- *              anything the board)
- *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
- *         LSEC = Low Speed External Connector
- *         HSEC = High Speed External Connector
- *
- * Line names are taken from the schematic "DragonBoard410c"
- * dated monday, august 31, 2015. Page 5 in particular.
- *
- * For the lines routed to the external connectors the
- * lines are named after the 96Boards CE Specification 1.0,
- * Appendix "Expansion Connector Signal Description".
- *
- * When the 96Board naming of a line and the schematic name of
- * the same line are in conflict, the 96Board specification
- * takes precedence, which means that the external UART on the
- * LSEC is named UART0 while the schematic and SoC names this
- * UART3. This is only for the informational lines i.e. "[FOO]",
- * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
- * ones actually used for GPIO.
- */
-
 / {
 	aliases {
 		serial0 = &blsp1_uart2;
@@ -76,7 +51,7 @@
 	};
 
 	reserved-memory {
-		ramoops@bff00000{
+		ramoops@bff00000 {
 			compatible = "ramoops";
 			reg = <0x0 0xbff00000 0x0 0x100000>;
 
@@ -86,509 +61,190 @@
 		};
 	};
 
-	soc {
-		pinctrl@1000000 {
-			gpio-line-names =
-				"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
-				"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
-				"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
-				"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
-				"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
-				"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
-				"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
-				"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
-				"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
-				"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
-				"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
-				"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
-				"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
-				"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
-				"[I2C3_SDA]", /* HSEC pin 38 */
-				"[I2C3_SCL]", /* HSEC pin 36 */
-				"[SPI0_MOSI]", /* LSEC pin 14 */
-				"[SPI0_MISO]", /* LSEC pin 10 */
-				"[SPI0_CS_N]", /* LSEC pin 12 */
-				"[SPI0_CLK]", /* LSEC pin 8 */
-				"HDMI_HPD_N", /* GPIO 20 */
-				"USR_LED_1_CTRL",
-				"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
-				"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
-				"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
-				"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
-				"[CSI0_MCLK]", /* HSEC pin 15 */
-				"[CSI1_MCLK]", /* HSEC pin 17 */
-				"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
-				"[I2C2_SDA]", /* HSEC pin 34 */
-				"[I2C2_SCL]", /* HSEC pin 32 */
-				"DSI2HDMI_INT_N",
-				"DSI_SW_SEL_APQ",
-				"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
-				"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
-				"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
-				"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
-				"FORCED_USB_BOOT",
-				"SD_CARD_DET_N",
-				"[WCSS_BT_SSBI]",
-				"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
-				"[WCSS_WLAN_DATA_1]",
-				"[WCSS_WLAN_DATA_0]",
-				"[WCSS_WLAN_SET]",
-				"[WCSS_WLAN_CLK]",
-				"[WCSS_FM_SSBI]",
-				"[WCSS_FM_SDI]",
-				"[WCSS_BT_DAT_CTL]",
-				"[WCSS_BT_DAT_STB]",
-				"NC",
-				"NC", /* GPIO 50 */
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"NC", /* GPIO 60 */
-				"NC",
-				"NC",
-				"[CDC_PDM0_CLK]",
-				"[CDC_PDM0_SYNC]",
-				"[CDC_PDM0_TX0]",
-				"[CDC_PDM0_RX0]",
-				"[CDC_PDM0_RX1]",
-				"[CDC_PDM0_RX2]",
-				"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
-				"NC", /* GPIO 70 */
-				"NC",
-				"NC",
-				"NC",
-				"NC", /* GPIO 74 */
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"BOOT_CONFIG_0", /* GPIO 80 */
-				"BOOT_CONFIG_1",
-				"BOOT_CONFIG_2",
-				"BOOT_CONFIG_3",
-				"NC",
-				"NC",
-				"BOOT_CONFIG_5",
-				"NC",
-				"NC",
-				"NC",
-				"NC", /* GPIO 90 */
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"NC",
-				"NC", /* GPIO 100 */
-				"NC",
-				"NC",
-				"NC",
-				"SSBI_GPS",
-				"NC",
-				"NC",
-				"KEY_VOLP_N",
-				"NC",
-				"NC",
-				"[LS_EXP_MI2S_WS]", /* GPIO 110 */
-				"NC",
-				"NC",
-				"[LS_EXP_MI2S_SCK]",
-				"[LS_EXP_MI2S_DATA0]",
-				"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
-				"NC",
-				"[DSI2HDMI_MI2S_WS]",
-				"[DSI2HDMI_MI2S_SCK]",
-				"[DSI2HDMI_MI2S_DATA0]",
-				"USR_LED_2_CTRL", /* GPIO 120 */
-				"SB_HS_ID";
-		};
-
-		dma@7884000 {
-			status = "okay";
-		};
-
-		serial@78af000 {
-			label = "LS-UART0";
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart1_default>;
-			pinctrl-1 = <&blsp1_uart1_sleep>;
-		};
-
-		serial@78b0000 {
-			label = "LS-UART1";
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart2_default>;
-			pinctrl-1 = <&blsp1_uart2_sleep>;
-		};
-
-		i2c@78b6000 {
-		/* On Low speed expansion */
-			label = "LS-I2C0";
-			status = "okay";
-		};
-
-		i2c@78b8000 {
-		/* On High speed expansion */
-			label = "HS-I2C2";
-			status = "okay";
-
-			adv_bridge: bridge@39 {
-				status = "okay";
-
-				compatible = "adi,adv7533";
-				reg = <0x39>;
-
-				interrupt-parent = <&msmgpio>;
-				interrupts = <31 2>;
-
-				adi,dsi-lanes = <4>;
-				clocks = <&rpmcc RPM_SMD_BB_CLK2>;
-				clock-names = "cec";
-
-				pd-gpios = <&msmgpio 32 0>;
-
-				avdd-supply = <&pm8916_l6>;
-				v1p2-supply = <&pm8916_l6>;
-				v3p3-supply = <&pm8916_l17>;
-
-				pinctrl-names = "default","sleep";
-				pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
-				pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
-				#sound-dai-cells = <1>;
+	usb2513 {
+		compatible = "smsc,usb3503";
+		reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+	};
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
 
-					port@0 {
-						reg = <0>;
-						adv7533_in: endpoint {
-							remote-endpoint = <&dsi0_out>;
-						};
-					};
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
 
-					port@1 {
-						reg = <1>;
-						adv7533_out: endpoint {
-							remote-endpoint = <&hdmi_con>;
-						};
-					};
-				};
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7533_out>;
 			};
 		};
+	};
 
-		i2c@78ba000 {
-		/* On Low speed expansion */
-			label = "LS-I2C1";
-			status = "okay";
-		};
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
 
-		spi@78b7000 {
-		/* On High speed expansion */
-			label = "HS-SPI1";
-			status = "okay";
-		};
+		pinctrl-names = "default";
+		pinctrl-0 = <&msm_key_volp_n_default>;
 
-		spi@78b9000 {
-		/* On Low speed expansion */
-			label = "LS-SPI0";
-			status = "okay";
+		button@0 {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
 		};
+	};
 
-		leds {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msmgpio_leds>,
-				    <&pm8916_gpios_leds>,
-				    <&pm8916_mpps_leds>;
-
-			compatible = "gpio-leds";
-
-			led@1 {
-				label = "apq8016-sbc:green:user1";
-				gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "heartbeat";
-				default-state = "off";
-			};
-
-			led@2 {
-				label = "apq8016-sbc:green:user2";
-				gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "mmc0";
-				default-state = "off";
-			};
-
-			led@3 {
-				label = "apq8016-sbc:green:user3";
-				gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "mmc1";
-				default-state = "off";
-			};
-
-			led@4 {
-				label = "apq8016-sbc:green:user4";
-				gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "none";
-				panic-indicator;
-				default-state = "off";
-			};
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&msmgpio_leds>,
+			    <&pm8916_gpios_leds>,
+			    <&pm8916_mpps_leds>;
 
-			led@5 {
-				label = "apq8016-sbc:yellow:wlan";
-				gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "phy0tx";
-				default-state = "off";
-			};
+		compatible = "gpio-leds";
 
-			led@6 {
-				label = "apq8016-sbc:blue:bt";
-				gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "bluetooth-power";
-				default-state = "off";
-			};
+		led@1 {
+			label = "apq8016-sbc:green:user1";
+			gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
 		};
 
-		sdhci@7824000 {
-			vmmc-supply = <&pm8916_l8>;
-			vqmmc-supply = <&pm8916_l5>;
-
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
-			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-			status = "okay";
+		led@2 {
+			label = "apq8016-sbc:green:user2";
+			gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
 		};
 
-		sdhci@7864000 {
-			vmmc-supply = <&pm8916_l11>;
-			vqmmc-supply = <&pm8916_l12>;
-
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
-			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+		led@3 {
+			label = "apq8016-sbc:green:user3";
+			gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
 
-			cd-gpios = <&msmgpio 38 0x1>;
-			status = "okay";
+		led@4 {
+			label = "apq8016-sbc:green:user4";
+			gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			panic-indicator;
+			default-state = "off";
 		};
 
-		usb@78d9000 {
-			extcon = <&usb_id>, <&usb_id>;
-			status = "okay";
-			adp-disable;
-			hnp-disable;
-			srp-disable;
-			dr_mode = "otg";
-			pinctrl-names = "default", "device";
-			pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
-			pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
-			ulpi {
-				phy {
-					v1p8-supply = <&pm8916_l7>;
-					v3p3-supply = <&pm8916_l13>;
-					extcon = <&usb_id>;
-				};
-			};
+		led@5 {
+			label = "apq8016-sbc:yellow:wlan";
+			gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
 		};
 
-		lpass@7708000 {
-			status = "okay";
+		led@6 {
+			label = "apq8016-sbc:blue:bt";
+			gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
 		};
+	};
+};
 
-		mdss@1a00000 {
-			status = "okay";
+&blsp_dma {
+	status = "okay";
+};
 
-			mdp@1a01000 {
-				status = "okay";
-			};
+&blsp_i2c2 {
+	/* On Low speed expansion */
+	status = "okay";
+	label = "LS-I2C0";
+};
 
-			dsi@1a98000 {
-				status = "okay";
+&blsp_i2c4 {
+	/* On High speed expansion */
+	status = "okay";
+	label = "HS-I2C2";
 
-				vdda-supply = <&pm8916_l2>;
-				vddio-supply = <&pm8916_l6>;
+	adv_bridge: bridge@39 {
+		status = "okay";
 
-				ports {
-					port@1 {
-						endpoint {
-							remote-endpoint = <&adv7533_in>;
-							data-lanes = <0 1 2 3>;
-						};
-					};
-				};
-			};
+		compatible = "adi,adv7533";
+		reg = <0x39>;
 
-			dsi-phy@1a98300 {
-				status = "okay";
+		interrupt-parent = <&msmgpio>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 
-				vddio-supply = <&pm8916_l6>;
-			};
-		};
+		adi,dsi-lanes = <4>;
+		clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+		clock-names = "cec";
 
-		lpass_codec: codec{
-			status = "okay";
-		};
+		pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
 
-		/*
-		Internal Codec
-			playback - Primary MI2S
-			capture - Ter MI2S
-
-		External Primary:
-			playback - secondary MI2S
-			capture - Quat MI2S
-
-		External Secondary:
-			playback - Quat MI2S
-			capture - Quat MI2S
-
-		*/
-
-		sound: sound {
-			compatible = "qcom,apq8016-sbc-sndcard";
-			reg = <0x07702000 0x4>, <0x07702004 0x4>;
-			reg-names = "mic-iomux", "spkr-iomux";
-
-			status = "okay";
-			pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
-			pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
-			pinctrl-names = "default", "sleep";
-			qcom,model = "DB410c";
-			qcom,audio-routing =
-				"AMIC2", "MIC BIAS Internal2",
-				"AMIC3", "MIC BIAS External1";
-
-			external-dai-link@0 {
-				link-name = "ADV7533";
-				cpu {
-					sound-dai = <&lpass MI2S_QUATERNARY>;
-				};
-				codec {
-					sound-dai = <&adv_bridge 0>;
-				};
-			};
+		avdd-supply = <&pm8916_l6>;
+		v1p2-supply = <&pm8916_l6>;
+		v3p3-supply = <&pm8916_l17>;
 
-			internal-codec-playback-dai-link@0 {
-				link-name = "WCD";
-				cpu {
-					sound-dai = <&lpass MI2S_PRIMARY>;
-				};
-				codec {
-					sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
-				};
-			};
+		pinctrl-names = "default","sleep";
+		pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
+		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
+		#sound-dai-cells = <1>;
 
-			internal-codec-capture-dai-link@0 {
-				link-name = "WCD-Capture";
-				cpu {
-					sound-dai = <&lpass MI2S_TERTIARY>;
-				};
-				codec {
-					sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7533_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
 				};
 			};
-		};
 
-		spmi@200f000 {
-			pm8916@0 {
-				gpios@c000 {
-					gpio-line-names =
-						"USR_LED_3_CTRL",
-						"USR_LED_4_CTRL",
-						"USB_HUB_RESET_N_PM",
-						"USB_SW_SEL_PM";
-				};
-				mpps@a000 {
-					gpio-line-names =
-						"VDD_PX_BIAS",
-						"WLAN_LED_CTRL",
-						"BT_LED_CTRL",
-						"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
+			port@1 {
+				reg = <1>;
+				adv7533_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
 				};
 			};
 		};
-
-		wcnss@a21b000 {
-			status = "okay";
-		};
-
-		tpiu@820000 { status = "okay"; };
-		funnel@821000 { status = "okay"; };
-		replicator@824000 { status = "okay"; };
-		etf@825000 { status = "okay"; };
-		etr@826000 { status = "okay"; };
-		funnel@841000 { status = "okay"; };
-		debug@850000 { status = "okay"; };
-		debug@852000 { status = "okay"; };
-		debug@854000 { status = "okay"; };
-		debug@856000 { status = "okay"; };
-		etm@85c000 { status = "okay"; };
-		etm@85d000 { status = "okay"; };
-		etm@85e000 { status = "okay"; };
-		etm@85f000 { status = "okay"; };
-		cti@810000 { status = "okay"; };
-		cti@811000 { status = "okay"; };
-		cti@858000 { status = "okay"; };
-		cti@859000 { status = "okay"; };
-		cti@85a000 { status = "okay"; };
-		cti@85b000 { status = "okay"; };
-	};
-
-	usb2513 {
-		compatible = "smsc,usb3503";
-		reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
-		initial-mode = <1>;
-	};
-
-	usb_id: usb-id {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb_id_default>;
 	};
+};
 
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
+&blsp_i2c6 {
+	/* On Low speed expansion */
+	status = "okay";
+	label = "LS-I2C1";
+};
 
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&adv7533_out>;
-			};
-		};
-	};
+&blsp_spi3 {
+	/* On High speed expansion */
+	status = "okay";
+	label = "HS-SPI1";
+};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
+&blsp_spi5 {
+	/* On Low speed expansion */
+	status = "okay";
+	label = "LS-SPI0";
+};
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&msm_key_volp_n_default>;
+&blsp1_uart1 {
+	status = "okay";
+	label = "LS-UART0";
+};
 
-		button@0 {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
-		};
-	};
+&blsp1_uart2 {
+	status = "okay";
+	label = "LS-UART1";
 };
 
 &camss {
-	status = "ok";
+	status = "okay";
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
 		port@0 {
 			reg = <0>;
 			csiphy0_ep: endpoint {
@@ -602,7 +258,7 @@
 };
 
 &cci {
-	status = "ok";
+	status = "okay";
 };
 
 &cci_i2c0 {
@@ -636,28 +292,126 @@
 	};
 };
 
-&spmi_bus {
-	pm8916_0: pm8916@0 {
-		pon@800 {
-			resin {
-				compatible = "qcom,pm8941-resin";
-				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				linux,code = <KEY_VOLUMEDOWN>;
-			};
+&dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&adv7533_in>;
+};
+
+&lpass {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pronto {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	status = "okay";
+
+	pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+	pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+	pinctrl-names = "default", "sleep";
+	qcom,model = "DB410c";
+	qcom,audio-routing =
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	external-dai-link@0 {
+		link-name = "ADV7533";
+		cpu {
+			sound-dai = <&lpass MI2S_QUATERNARY>;
+		};
+		codec {
+			sound-dai = <&adv_bridge 0>;
+		};
+	};
+
+	internal-codec-playback-dai-link@0 {
+		link-name = "WCD";
+		cpu {
+			sound-dai = <&lpass MI2S_PRIMARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+		};
+	};
+
+	internal-codec-capture-dai-link@0 {
+		link-name = "WCD-Capture";
+		cpu {
+			sound-dai = <&lpass MI2S_TERTIARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
 		};
 	};
 };
 
-&wcd_codec {
+&usb {
 	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+
+	pinctrl-names = "default", "device";
+	pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+	pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcd_codec {
 	clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
 	clock-names = "mclk";
 	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
 	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
 };
 
+/* Enable CoreSight */
+&cti0 { status = "okay"; };
+&cti1 { status = "okay"; };
+&cti12 { status = "okay"; };
+&cti13 { status = "okay"; };
+&cti14 { status = "okay"; };
+&cti15 { status = "okay"; };
+&debug0 { status = "okay"; };
+&debug1 { status = "okay"; };
+&debug2 { status = "okay"; };
+&debug3 { status = "okay"; };
+&etf { status = "okay"; };
+&etm0 { status = "okay"; };
+&etm1 { status = "okay"; };
+&etm2 { status = "okay"; };
+&etm3 { status = "okay"; };
+&etr { status = "okay"; };
+&funnel0 { status = "okay"; };
+&funnel1 { status = "okay"; };
+&replicator { status = "okay"; };
+&tpiu { status = "okay"; };
+
 &smd_rpm_regulators {
 	vdd_l1_l2_l3-supply = <&pm8916_s3>;
 	vdd_l4_l5_l6-supply = <&pm8916_s4>;
@@ -795,7 +549,155 @@
 	drive-strength = <16>;
 };
 
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "DragonBoard410c"
+ * dated monday, august 31, 2015. Page 5 in particular.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
 &msmgpio {
+	gpio-line-names =
+		"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
+		"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
+		"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
+		"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
+		"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
+		"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
+		"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
+		"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
+		"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
+		"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
+		"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
+		"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
+		"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
+		"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
+		"[I2C3_SDA]", /* HSEC pin 38 */
+		"[I2C3_SCL]", /* HSEC pin 36 */
+		"[SPI0_MOSI]", /* LSEC pin 14 */
+		"[SPI0_MISO]", /* LSEC pin 10 */
+		"[SPI0_CS_N]", /* LSEC pin 12 */
+		"[SPI0_CLK]", /* LSEC pin 8 */
+		"HDMI_HPD_N", /* GPIO 20 */
+		"USR_LED_1_CTRL",
+		"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
+		"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
+		"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
+		"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
+		"[CSI0_MCLK]", /* HSEC pin 15 */
+		"[CSI1_MCLK]", /* HSEC pin 17 */
+		"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
+		"[I2C2_SDA]", /* HSEC pin 34 */
+		"[I2C2_SCL]", /* HSEC pin 32 */
+		"DSI2HDMI_INT_N",
+		"DSI_SW_SEL_APQ",
+		"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
+		"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
+		"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
+		"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
+		"FORCED_USB_BOOT",
+		"SD_CARD_DET_N",
+		"[WCSS_BT_SSBI]",
+		"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
+		"[WCSS_WLAN_DATA_1]",
+		"[WCSS_WLAN_DATA_0]",
+		"[WCSS_WLAN_SET]",
+		"[WCSS_WLAN_CLK]",
+		"[WCSS_FM_SSBI]",
+		"[WCSS_FM_SDI]",
+		"[WCSS_BT_DAT_CTL]",
+		"[WCSS_BT_DAT_STB]",
+		"NC",
+		"NC", /* GPIO 50 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 60 */
+		"NC",
+		"NC",
+		"[CDC_PDM0_CLK]",
+		"[CDC_PDM0_SYNC]",
+		"[CDC_PDM0_TX0]",
+		"[CDC_PDM0_RX0]",
+		"[CDC_PDM0_RX1]",
+		"[CDC_PDM0_RX2]",
+		"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
+		"NC", /* GPIO 70 */
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 74 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"BOOT_CONFIG_0", /* GPIO 80 */
+		"BOOT_CONFIG_1",
+		"BOOT_CONFIG_2",
+		"BOOT_CONFIG_3",
+		"NC",
+		"NC",
+		"BOOT_CONFIG_5",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 90 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 100 */
+		"NC",
+		"NC",
+		"NC",
+		"SSBI_GPS",
+		"NC",
+		"NC",
+		"KEY_VOLP_N",
+		"NC",
+		"NC",
+		"[LS_EXP_MI2S_WS]", /* GPIO 110 */
+		"NC",
+		"NC",
+		"[LS_EXP_MI2S_SCK]",
+		"[LS_EXP_MI2S_DATA0]",
+		"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
+		"NC",
+		"[DSI2HDMI_MI2S_WS]",
+		"[DSI2HDMI_MI2S_SCK]",
+		"[DSI2HDMI_MI2S_DATA0]",
+		"USR_LED_2_CTRL", /* GPIO 120 */
+		"SB_HS_ID";
+
 	msmgpio_leds: msmgpio-leds {
 		pins = "gpio21", "gpio120";
 		function = "gpio";
@@ -855,6 +757,12 @@
 };
 
 &pm8916_gpios {
+	gpio-line-names =
+		"USR_LED_3_CTRL",
+		"USR_LED_4_CTRL",
+		"USB_HUB_RESET_N_PM",
+		"USB_SW_SEL_PM";
+
 	usb_hub_reset_pm: usb-hub-reset-pm {
 		pins = "gpio3";
 		function = PMIC_GPIO_FUNC_NORMAL;
@@ -897,6 +805,12 @@
 };
 
 &pm8916_mpps {
+	gpio-line-names =
+		"VDD_PX_BIAS",
+		"WLAN_LED_CTRL",
+		"BT_LED_CTRL",
+		"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
+
 	pinctrl-names = "default";
 	pinctrl-0 = <&ls_exp_gpio_f>;
 
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index b31117a93995..e8eaa958c199 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -26,18 +26,18 @@
 &blsp1_uart3 {
 	pinctrl-0 = <&serial_3_pins>;
 	pinctrl-names = "default";
-	status = "ok";
+	status = "okay";
 };
 
 &i2c_1 {
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
-	status = "ok";
+	status = "okay";
 };
 
 &spi_0 {
 	cs-select = <0>;
-	status = "ok";
+	status = "okay";
 
 	m25p80@0 {
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 1aa8d8579463..a94dac76bf3f 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-ipq6018.h>
 #include <dt-bindings/reset/qcom,gcc-ipq6018.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
 
 / {
 	#address-cells = <2>;
@@ -38,6 +39,10 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq6018_s2>;
 		};
 
 		CPU1: cpu@1 {
@@ -46,6 +51,10 @@
 			enable-method = "psci";
 			reg = <0x1>;
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq6018_s2>;
 		};
 
 		CPU2: cpu@2 {
@@ -54,6 +63,10 @@
 			enable-method = "psci";
 			reg = <0x2>;
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq6018_s2>;
 		};
 
 		CPU3: cpu@3 {
@@ -62,6 +75,10 @@
 			enable-method = "psci";
 			reg = <0x3>;
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq6018_s2>;
 		};
 
 		L2_0: l2-cache {
@@ -70,6 +87,42 @@
 		};
 	};
 
+	cpu_opp_table: cpu_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <725000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <787500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1320000000 {
+			opp-hz = /bits/ 64 <1320000000>;
+			opp-microvolt = <862500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <987500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1062500>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm";
@@ -98,6 +151,11 @@
 		#size-cells = <2>;
 		ranges;
 
+		rpm_msg_ram: memory@0x60000 {
+			reg = <0x0 0x60000 0x0 0x6000>;
+			no-map;
+		};
+
 		tz: tz@48500000 {
 			reg = <0x0 0x48500000 0x0 0x00200000>;
 			no-map;
@@ -294,12 +352,22 @@
 		};
 
 		apcs_glb: mailbox@b111000 {
-			compatible = "qcom,ipq8074-apcs-apps-global";
-			reg = <0x0b111000 0xc>;
-
+			compatible = "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a53pll>, <&xo>;
+			clock-names = "pll", "xo";
 			#mbox-cells = <1>;
 		};
 
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq6018-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo>;
+			clock-names = "xo";
+		};
+
 		timer {
 			compatible = "arm,armv8-timer";
 			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -440,4 +508,26 @@
 			#interrupt-cells = <2>;
 		};
 	};
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&apcs_glb 0>;
+
+		rpm_requests: glink-channel {
+			compatible = "qcom,rpm-ipq6018";
+			qcom,glink-channels = "rpm_requests";
+
+			regulators {
+				compatible = "qcom,rpm-mp5496-regulators";
+
+				ipq6018_s2: s2 {
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1062500>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index f4a76162ab5f..e8c37a1693d3 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -27,11 +27,11 @@
 };
 
 &blsp1_i2c2 {
-	status = "ok";
+	status = "okay";
 };
 
 &blsp1_spi1 {
-	status = "ok";
+	status = "okay";
 
 	m25p80@0 {
 		#address-cells = <1>;
@@ -43,37 +43,37 @@
 };
 
 &blsp1_uart3 {
-	status = "ok";
+	status = "okay";
 };
 
 &blsp1_uart5 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 	perst-gpio = <&tlmm 61 0x1>;
 };
 
 &pcie1 {
-	status = "ok";
+	status = "okay";
 	perst-gpio = <&tlmm 58 0x1>;
 };
 
 &pcie_phy0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie_phy1 {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_bam {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_nand {
-	status = "ok";
+	status = "okay";
 
 	nand@0 {
 		reg = <0>;
@@ -84,29 +84,29 @@
 };
 
 &sdhc_1 {
-	status = "ok";
+	status = "okay";
 };
 
 &qusb_phy_0 {
-	status = "ok";
+	status = "okay";
 };
 
 &qusb_phy_1 {
-	status = "ok";
+	status = "okay";
 };
 
 &ssphy_0 {
-	status = "ok";
+	status = "okay";
 };
 
 &ssphy_1 {
-	status = "ok";
+	status = "okay";
 };
 
 &usb_0 {
-	status = "ok";
+	status = "okay";
 };
 
 &usb_1 {
-	status = "ok";
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 96a5ec89b5f0..829e37ac82f6 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -67,7 +67,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
@@ -498,6 +498,14 @@
 				     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		};
 
+		watchdog: watchdog@b017000 {
+			compatible = "qcom,kpss-wdt";
+			reg = <0xb017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <30>;
+		};
+
 		timer@b120000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 9f2c8e94fd26..b9d3c5d98dd0 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -2,8 +2,7 @@
 
 /dts-v1/;
 
-#include "msm8916.dtsi"
-#include "pm8916.dtsi"
+#include "msm8916-pm8916.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
@@ -29,61 +28,6 @@
 		};
 	};
 
-	soc {
-		sdhci@7824000 {
-			status = "okay";
-
-			vmmc-supply = <&pm8916_l8>;
-			vqmmc-supply = <&pm8916_l5>;
-
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
-			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-		};
-
-		sdhci@7864000 {
-			status = "okay";
-
-			vmmc-supply = <&pm8916_l11>;
-			vqmmc-supply = <&pm8916_l12>;
-
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
-			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
-
-			non-removable;
-		};
-
-		serial@78b0000 {
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart2_default>;
-			pinctrl-1 = <&blsp1_uart2_sleep>;
-		};
-
-		usb@78d9000 {
-			status = "okay";
-			dr_mode = "peripheral";
-			extcon = <&usb_vbus>;
-
-			hnp-disable;
-			srp-disable;
-			adp-disable;
-
-			ulpi {
-				phy {
-					extcon = <&usb_vbus>;
-					v1p8-supply = <&pm8916_l7>;
-					v3p3-supply = <&pm8916_l13>;
-				};
-			};
-		};
-
-		wcnss@a21b000 {
-			status = "okay";
-		};
-	};
-
 	// FIXME: Use extcon device provided by charger driver when available
 	usb_vbus: usb-vbus {
 		compatible = "linux,extcon-usb-gpio";
@@ -108,17 +52,45 @@
 	};
 };
 
-&spmi_bus {
-	pm8916@0 {
-		pon@800 {
-			volume-down {
-				compatible = "qcom,pm8941-resin";
-				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-				bias-pull-up;
-				linux,code = <KEY_VOLUMEDOWN>;
-			};
-		};
-	};
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pronto {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+	non-removable;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+	extcon = <&usb_vbus>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_vbus>;
 };
 
 &smd_rpm_regulators {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
index 0c6e81fb8c01..1bd05046cdeb 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
@@ -3,8 +3,7 @@
  * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
  */
 
-#include "msm8916.dtsi"
-#include "pm8916.dtsi"
+#include "msm8916-pm8916.dtsi"
 
 / {
 	aliases {
@@ -15,13 +14,8 @@
 	chosen {
 		stdout-path = "serial0";
 	};
+};
 
-	soc {
-		serial@78b0000 {
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart2_default>;
-			pinctrl-1 = <&blsp1_uart2_sleep>;
-		};
-	};
+&blsp1_uart2 {
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
new file mode 100644
index 000000000000..cd626e7db599
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916.dtsi"
+#include "pm8916.dtsi"
+
+&camss {
+	vdda-supply = <&pm8916_l2>;
+};
+
+&dsi0 {
+	vdda-supply = <&pm8916_l2>;
+	vddio-supply = <&pm8916_l6>;
+};
+
+&dsi_phy0 {
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mpss {
+	cx-supply = <&pm8916_s1>;
+	mx-supply = <&pm8916_l3>;
+	pll-supply = <&pm8916_l7>;
+};
+
+&pronto {
+	vddmx-supply = <&pm8916_l3>;
+	vddpx-supply = <&pm8916_l7>;
+
+	iris {
+		vddxo-supply = <&pm8916_l7>;
+		vddrfa-supply = <&pm8916_s3>;
+		vddpa-supply = <&pm8916_l9>;
+		vdddig-supply = <&pm8916_l5>;
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8916_l8>;
+	vqmmc-supply = <&pm8916_l5>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8916_l11>;
+	vqmmc-supply = <&pm8916_l12>;
+};
+
+&usb_hs_phy {
+	v1p8-supply = <&pm8916_l7>;
+	v3p3-supply = <&pm8916_l13>;
+};
+
+&rpm_requests {
+	smd_rpm_regulators: pm8916-regulators {
+		compatible = "qcom,rpm-pm8916-regulators";
+
+		pm8916_s1: s1 {};
+		pm8916_s3: s3 {};
+		pm8916_s4: s4 {};
+
+		pm8916_l1: l1 {};
+		pm8916_l2: l2 {};
+		pm8916_l3: l3 {};
+		pm8916_l4: l4 {};
+		pm8916_l5: l5 {};
+		pm8916_l6: l6 {};
+		pm8916_l7: l7 {};
+		pm8916_l8: l8 {};
+		pm8916_l9: l9 {};
+		pm8916_l10: l10 {};
+		pm8916_l11: l11 {};
+		pm8916_l12: l12 {};
+		pm8916_l13: l13 {};
+		pm8916_l14: l14 {};
+		pm8916_l15: l15 {};
+		pm8916_l16: l16 {};
+		pm8916_l17: l17 {};
+		pm8916_l18: l18 {};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index a0c00d9d62c4..b18d21e42f59 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
-#include "msm8916.dtsi"
-#include "pm8916.dtsi"
+#include "msm8916-pm8916.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -23,78 +22,6 @@
 		};
 	};
 
-	soc {
-		sdhci@7824000 {
-			status = "okay";
-
-			vmmc-supply = <&pm8916_l8>;
-			vqmmc-supply = <&pm8916_l5>;
-
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
-			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-		};
-
-		sdhci@7864000 {
-			status = "okay";
-
-			vmmc-supply = <&pm8916_l11>;
-			vqmmc-supply = <&pm8916_l12>;
-
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
-			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
-
-			cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
-		};
-
-		serial@78b0000 {
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart2_default>;
-			pinctrl-1 = <&blsp1_uart2_sleep>;
-		};
-
-		usb@78d9000 {
-			status = "okay";
-			extcon = <&muic>, <&muic>;
-
-			hnp-disable;
-			srp-disable;
-			adp-disable;
-
-			ulpi {
-				phy {
-					extcon = <&muic>;
-					v1p8-supply = <&pm8916_l7>;
-					v3p3-supply = <&pm8916_l13>;
-				};
-			};
-		};
-
-		mdss@1a00000 {
-			dsi@1a98000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				vdda-supply = <&pm8916_l2>;
-				vddio-supply = <&pm8916_l6>;
-
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&mdss_default>;
-				pinctrl-1 = <&mdss_sleep>;
-			};
-
-			dsi-phy@1a98300 {
-				vddio-supply = <&pm8916_l6>;
-			};
-		};
-
-		wcnss@a21b000 {
-			status = "okay";
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -154,7 +81,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		muic: sm5502@25 {
+		muic: extcon@25 {
 			compatible = "siliconmitus,sm5502-muic";
 
 			reg = <0x25>;
@@ -186,17 +113,50 @@
 	};
 };
 
-&spmi_bus {
-	pm8916@0 {
-		pon@800 {
-			volume-down {
-				compatible = "qcom,pm8941-resin";
-				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-				bias-pull-up;
-				linux,code = <KEY_VOLUMEDOWN>;
-			};
-		};
-	};
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&dsi0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mdss_default>;
+	pinctrl-1 = <&mdss_sleep>;
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pronto {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&muic>, <&muic>;
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
 };
 
 &smd_rpm_regulators {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index 410c7d199f96..086f07ead5cb 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -44,15 +44,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			dsi0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-				data-lanes = <0 1>;
-			};
-		};
-	};
+&dsi0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&panel_in>;
 };
 
 &msmgpio {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 67cae5f9e47e..aaa21899f1a6 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -4,11 +4,11 @@
  */
 
 #include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/interconnect/qcom,msm8916.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8916.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -94,6 +94,20 @@
 		};
 	};
 
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -151,8 +165,8 @@
 		};
 
 		L2_0: l2-cache {
-		      compatible = "cache";
-		      cache-level = <2>;
+			compatible = "cache";
+			cache-level = <2>;
 		};
 
 		idle-states {
@@ -189,6 +203,42 @@
 		};
 	};
 
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+		opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8916", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -223,162 +273,24 @@
 		};
 	};
 
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	thermal-zones {
-		cpu0_1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu0_1_alert0: trip-point@0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu0_1_crit: cpu_crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu0_1_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		cpu2_3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 4>;
-
-			trips {
-				cpu2_3_alert0: trip-point0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu2_3_crit: cpu_crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu2_3_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		gpu-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 2>;
-
-			trips {
-				gpu_alert0: trip-point0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				gpu_crit: gpu_crit {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		camera-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 1>;
-
-			trips {
-				cam_alert0: trip-point0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
+	smd {
+		compatible = "qcom,smd";
 
-		modem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
 
-			thermal-sensors = <&tsens 0>;
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8916";
+				qcom,smd-channels = "rpm_requests";
 
-			trips {
-				modem_alert0: trip-point0 {
-					temperature = <85000>;
-					hysteresis = <2000>;
-					type = "hot";
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8916";
+					#clock-cells = <1>;
 				};
 			};
 		};
-
-	};
-
-	cpu_opp_table: cpu-opp-table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-		};
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-		};
-		opp-998400000 {
-			opp-hz = /bits/ 64 <998400000>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	clocks {
-		xo_board: xo-board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
 	};
 
 	smem {
@@ -390,509 +302,93 @@
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
-	firmware {
-		scm: scm {
-			compatible = "qcom,scm";
-			clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-			#reset-cells = <1>;
+	smp2p-hexagon {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
 
-			qcom,dload-mode = <&tcsr 0x6100>;
-		};
-	};
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
 
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0xffffffff>;
-		compatible = "simple-bus";
+		qcom,ipc = <&apcs 8 14>;
 
-		bimc: interconnect@400000 {
-			compatible = "qcom,msm8916-bimc";
-			reg = <0x00400000 0x62000>;
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
-		};
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
 
-		restart@4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0x4ab000 0x4>;
-		};
+		hexagon_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
 
-		pcnoc: interconnect@500000 {
-			compatible = "qcom,msm8916-pcnoc";
-			reg = <0x00500000 0x11000>;
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+			#qcom,smem-state-cells = <1>;
 		};
 
-		snoc: interconnect@580000 {
-			compatible = "qcom,msm8916-snoc";
-			reg = <0x00580000 0x14000>;
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
-		};
+		hexagon_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
 
-		msmgpio: pinctrl@1000000 {
-			compatible = "qcom,msm8916-pinctrl";
-			reg = <0x1000000 0x300000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 122>;
-			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+	};
 
-		gcc: clock-controller@1800000 {
-			compatible = "qcom,gcc-msm8916";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0x1800000 0x80000>;
-		};
-
-		tcsr_mutex_regs: syscon@1905000 {
-			compatible = "syscon";
-			reg = <0x1905000 0x20000>;
-		};
-
-		tcsr: syscon@1937000 {
-			compatible = "qcom,tcsr-msm8916", "syscon";
-			reg = <0x1937000 0x30000>;
-		};
-
-		tcsr_mutex: hwlock {
-			compatible = "qcom,tcsr-mutex";
-			syscon = <&tcsr_mutex_regs 0 0x1000>;
-			#hwlock-cells = <1>;
-		};
-
-		rpm_msg_ram: memory@60000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0x60000 0x8000>;
-		};
-
-		blsp1_uart1: serial@78af000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x78af000 0x200>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		a53pll: clock@b016000 {
-			compatible = "qcom,msm8916-a53pll";
-			reg = <0xb016000 0x40>;
-			#clock-cells = <0>;
-		};
-
-		apcs: mailbox@b011000 {
-			compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
-			reg = <0xb011000 0x1000>;
-			#mbox-cells = <1>;
-			clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
-			clock-names = "pll", "aux";
-			#clock-cells = <0>;
-		};
-
-		blsp1_uart2: serial@78b0000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x78b0000 0x200>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 3>, <&blsp_dma 2>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		blsp_dma: dma@7884000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x07884000 0x23000>;
-			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-			status = "disabled";
-		};
-
-		blsp_spi1: spi@78b5000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b5000 0x500>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 5>, <&blsp_dma 4>;
-			dma-names = "rx", "tx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&spi1_default>;
-			pinctrl-1 = <&spi1_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_spi2: spi@78b6000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b6000 0x500>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 7>, <&blsp_dma 6>;
-			dma-names = "rx", "tx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&spi2_default>;
-			pinctrl-1 = <&spi2_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_spi3: spi@78b7000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b7000 0x500>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
-			dma-names = "rx", "tx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&spi3_default>;
-			pinctrl-1 = <&spi3_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_spi4: spi@78b8000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b8000 0x500>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 11>, <&blsp_dma 10>;
-			dma-names = "rx", "tx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&spi4_default>;
-			pinctrl-1 = <&spi4_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_spi5: spi@78b9000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b9000 0x500>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 13>, <&blsp_dma 12>;
-			dma-names = "rx", "tx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&spi5_default>;
-			pinctrl-1 = <&spi5_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
 
-		blsp_spi6: spi@78ba000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078ba000 0x500>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 15>, <&blsp_dma 14>;
-			dma-names = "rx", "tx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&spi6_default>;
-			pinctrl-1 = <&spi6_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
 
-		blsp_i2c1: i2c@78b5000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b5000 0x500>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&i2c1_default>;
-			pinctrl-1 = <&i2c1_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_i2c2: i2c@78b6000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b6000 0x500>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&i2c2_default>;
-			pinctrl-1 = <&i2c2_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
+		qcom,ipc = <&apcs 8 18>;
 
-		blsp_i2c4: i2c@78b8000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b8000 0x500>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&i2c4_default>;
-			pinctrl-1 = <&i2c4_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
 
-		blsp_i2c5: i2c@78b9000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b9000 0x500>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&i2c5_default>;
-			pinctrl-1 = <&i2c5_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
 
-		blsp_i2c6: i2c@78ba000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078ba000 0x500>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&i2c6_default>;
-			pinctrl-1 = <&i2c6_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
+			#qcom,smem-state-cells = <1>;
 		};
 
-		lpass: lpass@7708000 {
-			status = "disabled";
-			compatible = "qcom,lpass-cpu-apq8016";
-			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
-				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
-				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
-				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
-				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
-				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
-				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
-
-			clock-names = "ahbix-clk",
-					"pcnoc-mport-clk",
-					"pcnoc-sway-clk",
-					"mi2s-bit-clk0",
-					"mi2s-bit-clk1",
-					"mi2s-bit-clk2",
-					"mi2s-bit-clk3";
-			#sound-dai-cells = <1>;
-
-			interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "lpass-irq-lpaif";
-			reg = <0x07708000 0x10000>;
-			reg-names = "lpass-lpaif";
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
 
-			#address-cells = <1>;
-			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
+	};
 
-                lpass_codec: codec{
-			compatible = "qcom,msm8916-wcd-digital-codec";
-			reg = <0x0771c000 0x400>;
-			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
-				 <&gcc GCC_CODEC_DIGCODEC_CLK>;
-			clock-names = "ahbix-clk", "mclk";
-			#sound-dai-cells = <1>;
-                };
+	smsm {
+		compatible = "qcom,smsm";
 
-		sdhc_1: sdhci@7824000 {
-			compatible = "qcom,sdhci-msm-v4";
-			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>, <0 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
-			mmc-ddr-1_8v;
-			bus-width = <8>;
-			non-removable;
-			status = "disabled";
-		};
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-3 = <&apcs 8 19>;
 
-		sdhc_2: sdhci@7864000 {
-			compatible = "qcom,sdhci-msm-v4";
-			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
-			reg-names = "hc_mem", "core_mem";
+		apps_smsm: apps@0 {
+			reg = <0>;
 
-			interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
-			bus-width = <4>;
-			status = "disabled";
+			#qcom,smem-state-cells = <1>;
 		};
 
-		otg: usb@78d9000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0x78d9000 0x200>,
-			      <0x78d9200 0x200>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
-				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			clock-names = "iface", "core";
-			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			assigned-clock-rates = <80000000>;
-			resets = <&gcc GCC_USB_HS_BCR>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			dr_mode = "otg";
-			ahb-burst-config = <0>;
-			phy-names = "usb-phy";
-			phys = <&usb_hs_phy>;
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs_phy: phy {
-					compatible = "qcom,usb-hs-phy-msm8916",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
-					reset-names = "phy", "por";
-					qcom,init-seq = /bits/ 8 <0x0 0x44
-						0x1 0x6b 0x2 0x24 0x3 0x13>;
-				};
-			};
-		};
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 
-		intc: interrupt-controller@b000000 {
-			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+			#interrupt-cells = <2>;
 		};
 
-		timer@b020000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xb020000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@b021000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb021000 0x1000>,
-				      <0xb022000 0x1000>;
-			};
-
-			frame@b023000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb023000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@b024000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb024000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@b025000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb025000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@b026000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb026000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@b027000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb027000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@b028000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb028000 0x1000>;
-				status = "disabled";
-			};
-		};
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
 
-		spmi_bus: spmi@200f000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x200f000 0x001000>,
-			      <0x2400000 0x400000>,
-			      <0x2c00000 0x400000>,
-			      <0x3800000 0x200000>,
-			      <0x200a000 0x002100>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
 			interrupt-controller;
-			#interrupt-cells = <4>;
+			#interrupt-cells = <2>;
 		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
 
 		rng@22000 {
 			compatible = "qcom,prng";
@@ -901,9 +397,14 @@
 			clock-names = "core";
 		};
 
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
 		qfprom: qfprom@5c000 {
 			compatible = "qcom,qfprom";
-			reg = <0x5c000 0x1000>;
+			reg = <0x0005c000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			tsens_caldata: caldata@d0 {
@@ -914,10 +415,24 @@
 			};
 		};
 
+		rpm_msg_ram: memory@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		bimc: interconnect@400000 {
+			compatible = "qcom,msm8916-bimc";
+			reg = <0x00400000 0x62000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
 		tsens: thermal-sensor@4a9000 {
 			compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
-			reg = <0x4a9000 0x1000>, /* TM */
-			      <0x4a8000 0x1000>; /* SROT */
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
 			nvmem-cell-names = "calib", "calib_sel";
 			#qcom,sensors = <5>;
@@ -926,365 +441,52 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		apps_iommu: iommu@1ef0000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#iommu-cells = <1>;
-			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
-			ranges = <0 0x1e20000 0x40000>;
-			reg = <0x1ef0000 0x3000>;
-			clocks = <&gcc GCC_SMMU_CFG_CLK>,
-				 <&gcc GCC_APSS_TCU_CLK>;
-			clock-names = "iface", "bus";
-			qcom,iommu-secure-id = <17>;
-
-			// vfe:
-			iommu-ctx@3000 {
-				compatible = "qcom,msm-iommu-v1-sec";
-				reg = <0x3000 0x1000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			// mdp_0:
-			iommu-ctx@4000 {
-				compatible = "qcom,msm-iommu-v1-ns";
-				reg = <0x4000 0x1000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			// venus_ns:
-			iommu-ctx@5000 {
-				compatible = "qcom,msm-iommu-v1-sec";
-				reg = <0x5000 0x1000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		gpu_iommu: iommu@1f08000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#iommu-cells = <1>;
-			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
-			ranges = <0 0x1f08000 0x10000>;
-			clocks = <&gcc GCC_SMMU_CFG_CLK>,
-				 <&gcc GCC_GFX_TCU_CLK>;
-			clock-names = "iface", "bus";
-			qcom,iommu-secure-id = <18>;
-
-			// gfx3d_user:
-			iommu-ctx@1000 {
-				compatible = "qcom,msm-iommu-v1-ns";
-				reg = <0x1000 0x1000>;
-				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			// gfx3d_priv:
-			iommu-ctx@2000 {
-				compatible = "qcom,msm-iommu-v1-ns";
-				reg = <0x2000 0x1000>;
-				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		gpu@1c00000 {
-			compatible = "qcom,adreno-306.0", "qcom,adreno";
-			reg = <0x01c00000 0x20000>;
-			reg-names = "kgsl_3d0_reg_memory";
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "kgsl_3d0_irq";
-			clock-names =
-			    "core",
-			    "iface",
-			    "mem",
-			    "mem_iface",
-			    "alt_mem_iface",
-			    "gfx3d";
-			clocks =
-			    <&gcc GCC_OXILI_GFX3D_CLK>,
-			    <&gcc GCC_OXILI_AHB_CLK>,
-			    <&gcc GCC_OXILI_GMEM_CLK>,
-			    <&gcc GCC_BIMC_GFX_CLK>,
-			    <&gcc GCC_BIMC_GPU_CLK>,
-			    <&gcc GFX3D_CLK_SRC>;
-			power-domains = <&gcc OXILI_GDSC>;
-			operating-points-v2 = <&gpu_opp_table>;
-			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
-
-			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-400000000 {
-					opp-hz = /bits/ 64 <400000000>;
-				};
-				opp-19200000 {
-					opp-hz = /bits/ 64 <19200000>;
-				};
-			};
+		pcnoc: interconnect@500000 {
+			compatible = "qcom,msm8916-pcnoc";
+			reg = <0x00500000 0x11000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
-		mdss: mdss@1a00000 {
-			compatible = "qcom,mdss";
-			reg = <0x1a00000 0x1000>,
-			      <0x1ac8000 0x3000>;
-			reg-names = "mdss_phys", "vbif_phys";
-
-			power-domains = <&gcc MDSS_GDSC>;
-
-			clocks = <&gcc GCC_MDSS_AHB_CLK>,
-				 <&gcc GCC_MDSS_AXI_CLK>,
-				 <&gcc GCC_MDSS_VSYNC_CLK>;
-			clock-names = "iface",
-				      "bus",
-				      "vsync";
-
-			interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			mdp: mdp@1a01000 {
-				compatible = "qcom,mdp5";
-				reg = <0x1a01000 0x89000>;
-				reg-names = "mdp_phys";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <0 0>;
-
-				clocks = <&gcc GCC_MDSS_AHB_CLK>,
-					 <&gcc GCC_MDSS_AXI_CLK>,
-					 <&gcc GCC_MDSS_MDP_CLK>,
-					 <&gcc GCC_MDSS_VSYNC_CLK>;
-				clock-names = "iface",
-					      "bus",
-					      "core",
-					      "vsync";
-
-				iommus = <&apps_iommu 4>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						mdp5_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
-						};
-					};
-				};
-			};
-
-			dsi0: dsi@1a98000 {
-				compatible = "qcom,mdss-dsi-ctrl";
-				reg = <0x1a98000 0x25c>;
-				reg-names = "dsi_ctrl";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <4 0>;
-
-				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
-						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi_phy0 0>,
-							 <&dsi_phy0 1>;
-
-				clocks = <&gcc GCC_MDSS_MDP_CLK>,
-					 <&gcc GCC_MDSS_AHB_CLK>,
-					 <&gcc GCC_MDSS_AXI_CLK>,
-					 <&gcc GCC_MDSS_BYTE0_CLK>,
-					 <&gcc GCC_MDSS_PCLK0_CLK>,
-					 <&gcc GCC_MDSS_ESC0_CLK>;
-				clock-names = "mdp_core",
-					      "iface",
-					      "bus",
-					      "byte",
-					      "pixel",
-					      "core";
-				phys = <&dsi_phy0>;
-				phy-names = "dsi-phy";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						dsi0_in: endpoint {
-							remote-endpoint = <&mdp5_intf1_out>;
-						};
-					};
-
-					port@1 {
-						reg = <1>;
-						dsi0_out: endpoint {
-						};
-					};
-				};
-			};
-
-			dsi_phy0: dsi-phy@1a98300 {
-				compatible = "qcom,dsi-phy-28nm-lp";
-				reg = <0x1a98300 0xd4>,
-				      <0x1a98500 0x280>,
-				      <0x1a98780 0x30>;
-				reg-names = "dsi_pll",
-					    "dsi_phy",
-					    "dsi_phy_regulator";
-
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-
-				clocks = <&gcc GCC_MDSS_AHB_CLK>,
-					 <&xo_board>;
-				clock-names = "iface", "ref";
-			};
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8916-snoc";
+			reg = <0x00580000 0x14000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
+		/* System CTIs */
+		/* CTI 0 - TMC connections */
+		cti0: cti@810000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x00810000 0x1000>;
 
-		hexagon@4080000 {
-			compatible = "qcom,q6v5-pil";
-			reg = <0x04080000 0x100>,
-			      <0x04020000 0x040>;
-
-			reg-names = "qdsp6", "rmb";
-
-			interrupts-extended = <&intc 0 24 1>,
-					      <&hexagon_smp2p_in 0 0>,
-					      <&hexagon_smp2p_in 1 0>,
-					      <&hexagon_smp2p_in 2 0>,
-					      <&hexagon_smp2p_in 3 0>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
-				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
-				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "bus", "mem", "xo";
-
-			qcom,smem-states = <&hexagon_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			resets = <&scm 0>;
-			reset-names = "mss_restart";
-
-			cx-supply = <&pm8916_s1>;
-			mx-supply = <&pm8916_l3>;
-			pll-supply = <&pm8916_l7>;
-
-			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
 
 			status = "disabled";
-
-			mba {
-				memory-region = <&mba_mem>;
-			};
-
-			mpss {
-				memory-region = <&mpss_mem>;
-			};
-
-			smd-edge {
-				interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,smd-edge = <0>;
-				qcom,ipc = <&apcs 8 12>;
-				qcom,remote-pid = <1>;
-
-				label = "hexagon";
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,smd-channels = "fastrpcsmd-apps-dsp";
-					label = "adsp";
-
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					cb@1{
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <1>;
-					};
-				};
-			};
 		};
 
-		pronto: wcnss@a21b000 {
-			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
-			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
-			reg-names = "ccu", "dxe", "pmu";
-
-			memory-region = <&wcnss_mem>;
-
-			interrupts-extended = <&intc 0 149 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-			vddmx-supply = <&pm8916_l3>;
-			vddpx-supply = <&pm8916_l7>;
-
-			qcom,state = <&wcnss_smp2p_out 0>;
-			qcom,state-names = "stop";
+		/* CTI 1 - TPIU connections */
+		cti1: cti@811000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x00811000 0x1000>;
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&wcnss_pin_a>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
 
 			status = "disabled";
-
-			iris {
-				compatible = "qcom,wcn3620";
-
-				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
-				clock-names = "xo";
-
-				vddxo-supply = <&pm8916_l7>;
-				vddrfa-supply = <&pm8916_s3>;
-				vddpa-supply = <&pm8916_l9>;
-				vdddig-supply = <&pm8916_l5>;
-			};
-
-			smd-edge {
-				interrupts = <0 142 1>;
-
-				qcom,ipc = <&apcs 8 17>;
-				qcom,smd-edge = <6>;
-				qcom,remote-pid = <4>;
-
-				label = "pronto";
-
-				wcnss {
-					compatible = "qcom,wcnss";
-					qcom,smd-channels = "WCNSS_CTRL";
-
-					qcom,mmio = <&pronto>;
-
-					bt {
-						compatible = "qcom,wcnss-bt";
-					};
-
-					wifi {
-						compatible = "qcom,wcnss-wlan";
-
-						interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>,
-							     <0 146 IRQ_TYPE_LEVEL_HIGH>;
-						interrupt-names = "tx", "rx";
-
-						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
-						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
-					};
-				};
-			};
 		};
 
-		tpiu@820000 {
+		/* CTIs 2-11 - no information - not instantiated */
+
+		tpiu: tpiu@820000 {
 			compatible = "arm,coresight-tpiu", "arm,primecell";
-			reg = <0x820000 0x1000>;
+			reg = <0x00820000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1300,9 +502,9 @@
 			};
 		};
 
-		funnel@821000 {
+		funnel0: funnel@821000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x821000 0x1000>;
+			reg = <0x00821000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1341,9 +543,9 @@
 			};
 		};
 
-		replicator@824000 {
+		replicator: replicator@824000 {
 			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
-			reg = <0x824000 0x1000>;
+			reg = <0x00824000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1377,9 +579,9 @@
 			};
 		};
 
-		etf@825000 {
+		etf: etf@825000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x825000 0x1000>;
+			reg = <0x00825000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1403,9 +605,9 @@
 			};
 		};
 
-		etr@826000 {
+		etr: etr@826000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x826000 0x1000>;
+			reg = <0x00826000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1421,9 +623,9 @@
 			};
 		};
 
-		funnel@841000 {	/* APSS funnel only 4 inputs are used */
+		funnel1: funnel@841000 {	/* APSS funnel only 4 inputs are used */
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x841000 0x1000>;
+			reg = <0x00841000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1469,45 +671,106 @@
 			};
 		};
 
-		debug@850000 {
-			compatible = "arm,coresight-cpu-debug","arm,primecell";
-			reg = <0x850000 0x1000>;
+		debug0: debug@850000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00850000 0x1000>;
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 			cpu = <&CPU0>;
 			status = "disabled";
 		};
 
-		debug@852000 {
-			compatible = "arm,coresight-cpu-debug","arm,primecell";
-			reg = <0x852000 0x1000>;
+		debug1: debug@852000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00852000 0x1000>;
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 			cpu = <&CPU1>;
 			status = "disabled";
 		};
 
-		debug@854000 {
-			compatible = "arm,coresight-cpu-debug","arm,primecell";
-			reg = <0x854000 0x1000>;
+		debug2: debug@854000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00854000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU2>;
+			status = "disabled";
+		};
+
+		debug3: debug@856000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00856000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU3>;
+			status = "disabled";
+		};
+
+		/* Core CTIs; CTIs 12-15 */
+		/* CTI - CPU-0 */
+		cti12: cti@858000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x00858000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU0>;
+			arm,cs-dev-assoc = <&etm0>;
+
+			status = "disabled";
+		};
+
+		/* CTI - CPU-1 */
+		cti13: cti@859000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x00859000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU1>;
+			arm,cs-dev-assoc = <&etm1>;
+
+			status = "disabled";
+		};
+
+		/* CTI - CPU-2 */
+		cti14: cti@85a000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x0085a000 0x1000>;
+
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
+
 			cpu = <&CPU2>;
+			arm,cs-dev-assoc = <&etm2>;
+
 			status = "disabled";
 		};
 
-		debug@856000 {
-			compatible = "arm,coresight-cpu-debug","arm,primecell";
-			reg = <0x856000 0x1000>;
+		/* CTI - CPU-3 */
+		cti15: cti@85b000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x0085b000 0x1000>;
+
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
+
 			cpu = <&CPU3>;
+			arm,cs-dev-assoc = <&etm3>;
+
 			status = "disabled";
 		};
 
 		etm0: etm@85c000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x85c000 0x1000>;
+			reg = <0x0085c000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1528,7 +791,7 @@
 
 		etm1: etm@85d000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x85d000 0x1000>;
+			reg = <0x0085d000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1549,7 +812,7 @@
 
 		etm2: etm@85e000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x85e000 0x1000>;
+			reg = <0x0085e000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1570,7 +833,7 @@
 
 		etm3: etm@85f000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x85f000 0x1000>;
+			reg = <0x0085f000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
@@ -1589,126 +852,171 @@
 			};
 		};
 
-		/* System CTIs */
-		/* CTI 0 - TMC connections */
-		cti@810000 {
-			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x810000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			status = "disabled";
+		msmgpio: pinctrl@1000000 {
+			compatible = "qcom,msm8916-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 122>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
-		/* CTI 1 - TPIU connections */
-		cti@811000 {
-			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x811000 0x1000>;
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8916";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x01800000 0x80000>;
+		};
 
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
 
-			status = "disabled";
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8916", "syscon";
+			reg = <0x01937000 0x30000>;
 		};
 
-		/* CTIs 2-11 - no information - not instantiated */
+		mdss: mdss@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ac8000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
 
-		/* Core CTIs; CTIs 12-15 */
-		/* CTI - CPU-0 */
-		cti@858000 {
-			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
-				     "arm,primecell";
-			reg = <0x858000 0x1000>;
+			power-domains = <&gcc MDSS_GDSC>;
 
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
 
-			cpu = <&CPU0>;
-			arm,cs-dev-assoc = <&etm0>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 
-			status = "disabled";
-		};
+			interrupt-controller;
+			#interrupt-cells = <1>;
 
-		/* CTI - CPU-1 */
-		cti@859000 {
-			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
-				     "arm,primecell";
-			reg = <0x859000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
+			mdp: mdp@1a01000 {
+				compatible = "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
 
-			cpu = <&CPU1>;
-			arm,cs-dev-assoc = <&etm1>;
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
 
-			status = "disabled";
-		};
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
 
-		/* CTI - CPU-2 */
-		cti@85a000 {
-			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
-				     "arm,primecell";
-			reg = <0x85a000 0x1000>;
+				iommus = <&apps_iommu 4>;
 
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-			cpu = <&CPU2>;
-			arm,cs-dev-assoc = <&etm2>;
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+				};
+			};
 
-			status = "disabled";
-		};
+			dsi0: dsi@1a98000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x01a98000 0x25c>;
+				reg-names = "dsi_ctrl";
 
-		/* CTI - CPU-3 */
-		cti@85b000 {
-			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
-				     "arm,primecell";
-			reg = <0x85b000 0x1000>;
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
 
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi_phy0 0>,
+							 <&dsi_phy0 1>;
 
-			cpu = <&CPU3>;
-			arm,cs-dev-assoc = <&etm3>;
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&dsi_phy0>;
+				phy-names = "dsi-phy";
 
-			status = "disabled";
-		};
+				#address-cells = <1>;
+				#size-cells = <0>;
 
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-		venus: video-codec@1d00000 {
-			compatible = "qcom,msm8916-venus";
-			reg = <0x01d00000 0xff000>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&gcc VENUS_GDSC>;
-			clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
-				 <&gcc GCC_VENUS0_AHB_CLK>,
-				 <&gcc GCC_VENUS0_AXI_CLK>;
-			clock-names = "core", "iface", "bus";
-			iommus = <&apps_iommu 5>;
-			memory-region = <&venus_mem>;
-			status = "okay";
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
 
-			video-decoder {
-				compatible = "venus-decoder";
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
 			};
 
-			video-encoder {
-				compatible = "venus-encoder";
+			dsi_phy0: dsi-phy@1a98300 {
+				compatible = "qcom,dsi-phy-28nm-lp";
+				reg = <0x01a98300 0xd4>,
+				      <0x01a98500 0x280>,
+				      <0x01a98780 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&xo_board>;
+				clock-names = "iface", "ref";
 			};
 		};
 
 		camss: camss@1b00000 {
 			compatible = "qcom,msm8916-camss";
-			reg = <0x1b0ac00 0x200>,
-				<0x1b00030 0x4>,
-				<0x1b0b000 0x200>,
-				<0x1b00038 0x4>,
-				<0x1b08000 0x100>,
-				<0x1b08400 0x100>,
-				<0x1b0a000 0x500>,
-				<0x1b00020 0x10>,
-				<0x1b10000 0x1000>;
+			reg = <0x01b0ac00 0x200>,
+				<0x01b00030 0x4>,
+				<0x01b0b000 0x200>,
+				<0x01b00038 0x4>,
+				<0x01b08000 0x100>,
+				<0x01b08400 0x100>,
+				<0x01b0a000 0x500>,
+				<0x01b00020 0x10>,
+				<0x01b10000 0x1000>;
 			reg-names = "csiphy0",
 				"csiphy0_clk_mux",
 				"csiphy1",
@@ -1769,7 +1077,6 @@
 				"csi_vfe0",
 				"vfe_ahb",
 				"vfe_axi";
-			vdda-supply = <&pm8916_l2>;
 			iommus = <&apps_iommu 3>;
 			status = "disabled";
 			ports {
@@ -1782,7 +1089,7 @@
 			compatible = "qcom,msm8916-cci";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x1b0c000 0x1000>;
+			reg = <0x01b0c000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
 				<&gcc GCC_CAMSS_CCI_AHB_CLK>,
@@ -1804,135 +1111,804 @@
 				#size-cells = <0>;
 			};
 		};
-	};
-
-	smd {
-		compatible = "qcom,smd";
 
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
+		gpu@1c00000 {
+			compatible = "qcom,adreno-306.0", "qcom,adreno";
+			reg = <0x01c00000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names =
+			    "core",
+			    "iface",
+			    "mem",
+			    "mem_iface",
+			    "alt_mem_iface",
+			    "gfx3d";
+			clocks =
+			    <&gcc GCC_OXILI_GFX3D_CLK>,
+			    <&gcc GCC_OXILI_AHB_CLK>,
+			    <&gcc GCC_OXILI_GMEM_CLK>,
+			    <&gcc GCC_BIMC_GFX_CLK>,
+			    <&gcc GCC_BIMC_GPU_CLK>,
+			    <&gcc GFX3D_CLK_SRC>;
+			power-domains = <&gcc OXILI_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
 
-			rpm-requests {
-				compatible = "qcom,rpm-msm8916";
-				qcom,smd-channels = "rpm_requests";
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
 
-				rpmcc: qcom,rpmcc {
-					compatible = "qcom,rpmcc-msm8916";
-					#clock-cells = <1>;
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
 				};
-
-				smd_rpm_regulators: pm8916-regulators {
-					compatible = "qcom,rpm-pm8916-regulators";
-
-					pm8916_s1: s1 {};
-					pm8916_s3: s3 {};
-					pm8916_s4: s4 {};
-
-					pm8916_l1: l1 {};
-					pm8916_l2: l2 {};
-					pm8916_l3: l3 {};
-					pm8916_l4: l4 {};
-					pm8916_l5: l5 {};
-					pm8916_l6: l6 {};
-					pm8916_l7: l7 {};
-					pm8916_l8: l8 {};
-					pm8916_l9: l9 {};
-					pm8916_l10: l10 {};
-					pm8916_l11: l11 {};
-					pm8916_l12: l12 {};
-					pm8916_l13: l13 {};
-					pm8916_l14: l14 {};
-					pm8916_l15: l15 {};
-					pm8916_l16: l16 {};
-					pm8916_l17: l17 {};
-					pm8916_l18: l18 {};
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
 				};
 			};
 		};
-	};
 
-	hexagon-smp2p {
-		compatible = "qcom,smp2p";
-		qcom,smem = <435>, <428>;
+		venus: video-codec@1d00000 {
+			compatible = "qcom,msm8916-venus";
+			reg = <0x01d00000 0xff000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&gcc VENUS_GDSC>;
+			clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+				 <&gcc GCC_VENUS0_AHB_CLK>,
+				 <&gcc GCC_VENUS0_AXI_CLK>;
+			clock-names = "core", "iface", "bus";
+			iommus = <&apps_iommu 5>;
+			memory-region = <&venus_mem>;
+			status = "okay";
 
-		interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
+			video-decoder {
+				compatible = "venus-decoder";
+			};
 
-		qcom,ipc = <&apcs 8 14>;
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+		};
 
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <1>;
+		apps_iommu: iommu@1ef0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01e20000 0x40000>;
+			reg = <0x01ef0000 0x3000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <17>;
 
-		hexagon_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
+			// vfe:
+			iommu-ctx@3000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x3000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
 
-			#qcom,smem-state-cells = <1>;
+			// mdp_0:
+			iommu-ctx@4000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x4000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			// venus_ns:
+			iommu-ctx@5000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x5000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
-		hexagon_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
+		gpu_iommu: iommu@1f08000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01f08000 0x10000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <18>;
+
+			// gfx3d_user:
+			iommu-ctx@1000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x1000 0x1000>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			// gfx3d_priv:
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
 
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x400000>,
+			      <0x02c00000 0x400000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
 			interrupt-controller;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <4>;
 		};
-	};
 
-	wcnss-smp2p {
-		compatible = "qcom,smp2p";
-		qcom,smem = <451>, <431>;
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
+			reg = <0x04080000 0x100>,
+			      <0x04020000 0x040>;
 
-		interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
+			reg-names = "qdsp6", "rmb";
 
-		qcom,ipc = <&apcs 8 18>;
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
 
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <4>;
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "bus", "mem", "xo";
 
-		wcnss_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
+			qcom,smem-states = <&hexagon_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
 
-			#qcom,smem-state-cells = <1>;
+			resets = <&scm 0>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,smd-edge = <0>;
+				qcom,ipc = <&apcs 8 12>;
+				qcom,remote-pid = <1>;
+
+				label = "hexagon";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,smd-channels = "fastrpcsmd-apps-dsp";
+					label = "adsp";
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+					};
+				};
+			};
 		};
 
-		wcnss_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
+		sound: sound@7702000 {
+			status = "disabled";
+			compatible = "qcom,apq8016-sbc-sndcard";
+			reg = <0x07702000 0x4>, <0x07702004 0x4>;
+			reg-names = "mic-iomux", "spkr-iomux";
+		};
+
+		lpass: audio-controller@7708000 {
+			status = "disabled";
+			compatible = "qcom,lpass-cpu-apq8016";
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
+
+			clock-names = "ahbix-clk",
+					"pcnoc-mport-clk",
+					"pcnoc-sway-clk",
+					"mi2s-bit-clk0",
+					"mi2s-bit-clk1",
+					"mi2s-bit-clk2",
+					"mi2s-bit-clk3";
+			#sound-dai-cells = <1>;
+
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpass-irq-lpaif";
+			reg = <0x07708000 0x10000>;
+			reg-names = "lpass-lpaif";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lpass_codec: audio-codec@771c000 {
+			compatible = "qcom,msm8916-wcd-digital-codec";
+			reg = <0x0771c000 0x400>;
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_CODEC_DIGCODEC_CLK>;
+			clock-names = "ahbix-clk", "mclk";
+			#sound-dai-cells = <1>;
+		};
 
+		sdhc_1: sdhci@7824000 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: sdhci@7864000 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp_dma: dma@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x23000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 3>, <&blsp_dma 2>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			status = "disabled";
+		};
+
+		blsp_i2c1: i2c@78b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c1_default>;
+			pinctrl-1 = <&i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 5>, <&blsp_dma 4>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi1_default>;
+			pinctrl-1 = <&spi1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi2: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 7>, <&blsp_dma 6>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi2_default>;
+			pinctrl-1 = <&spi2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x500>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi3_default>;
+			pinctrl-1 = <&spi3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c4_default>;
+			pinctrl-1 = <&i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 11>, <&blsp_dma 10>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi4_default>;
+			pinctrl-1 = <&spi4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c5: i2c@78b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b9000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c5_default>;
+			pinctrl-1 = <&i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b9000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 13>, <&blsp_dma 12>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi5_default>;
+			pinctrl-1 = <&spi5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078ba000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi6: spi@78ba000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078ba000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 15>, <&blsp_dma 14>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi6_default>;
+			pinctrl-1 = <&spi6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@78d9000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078d9000 0x200>,
+			      <0x078d9200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8916",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					qcom,init-seq = /bits/ 8 <0x0 0x44
+						0x1 0x6b 0x2 0x24 0x3 0x13>;
+				};
+			};
+		};
+
+		pronto: remoteproc@a21b000 {
+			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			qcom,state = <&wcnss_smp2p_out 0>;
+			qcom,state-names = "stop";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wcnss_pin_a>;
+
+			status = "disabled";
+
+			iris {
+				compatible = "qcom,wcn3620";
+
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&pronto>;
+
+					bt {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+			clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
+			clock-names = "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		a53pll: clock@b016000 {
+			compatible = "qcom,msm8916-a53pll";
+			reg = <0x0b016000 0x40>;
+			#clock-cells = <0>;
+		};
+
+		timer@b020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@b021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b021000 0x1000>,
+				      <0x0b022000 0x1000>;
+			};
+
+			frame@b023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b028000 0x1000>;
+				status = "disabled";
+			};
 		};
 	};
 
-	smsm {
-		compatible = "qcom,smsm";
+	thermal-zones {
+		cpu0-1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		#address-cells = <1>;
-		#size-cells = <0>;
+			thermal-sensors = <&tsens 5>;
 
-		qcom,ipc-1 = <&apcs 8 13>;
-		qcom,ipc-3 = <&apcs 8 19>;
+			trips {
+				cpu0_1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_1_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 
-		apps_smsm: apps@0 {
-			reg = <0>;
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
 
-			#qcom,smem-state-cells = <1>;
+		cpu2-3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu2_3_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_3_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
-		hexagon_smsm: hexagon@1 {
-			reg = <1>;
-			interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-			interrupt-controller;
-			#interrupt-cells = <2>;
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
-		wcnss_smsm: wcnss@6 {
-			reg = <6>;
-			interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-			interrupt-controller;
-			#interrupt-cells = <2>;
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cam_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 188fff2095f1..8626b3a50eda 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -335,7 +335,7 @@
 		blsp2_uart2: serial@f995e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf995e000 0x1000>;
-			interrupt = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
 				<&gcc GCC_BLSP2_AHB_CLK>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 9951286db775..fd6ae5464dea 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1009,7 +1009,8 @@
 				"ispif",
 				"vfe0",
 				"vfe1";
-			power-domains = <&mmcc VFE0_GDSC>;
+			power-domains = <&mmcc VFE0_GDSC>,
+					<&mmcc VFE1_GDSC>;
 			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
 				<&mmcc CAMSS_ISPIF_AHB_CLK>,
 				<&mmcc CAMSS_CSI0PHYTIMER_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
index ea0e9558d0f2..2e6a6f6c3b66 100644
--- a/arch/arm64/boot/dts/qcom/pm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -44,7 +44,7 @@
 			gpio-ranges = <&pm660_gpios 0 0 13>;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			interrupt-cells =<2>;
+			#interrupt-cells = <2>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index 0bcdf0471107..f931cb0de231 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -1,24 +1,17 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
 &spmi_bus {
 
-	pm8916_0: pm8916@0 {
+	pm8916_0: pmic@0 {
 		compatible = "qcom,pm8916", "qcom,spmi-pmic";
 		reg = <0x0 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		rtc@6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-		};
-
 		pon@800 {
 			compatible = "qcom,pm8916-pon";
 			reg = <0x800>;
@@ -33,6 +26,14 @@
 				linux,code = <KEY_POWER>;
 			};
 
+			pm8916_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+
 			watchdog {
 				compatible = "qcom,pm8916-wdt";
 				interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
@@ -40,28 +41,6 @@
 			};
 		};
 
-		pm8916_gpios: gpios@c000 {
-			compatible = "qcom,pm8916-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
-				     <0 0xc1 0 IRQ_TYPE_NONE>,
-				     <0 0xc2 0 IRQ_TYPE_NONE>,
-				     <0 0xc3 0 IRQ_TYPE_NONE>;
-		};
-
-		pm8916_mpps: mpps@a000 {
-			compatible = "qcom,pm8916-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
-				     <0 0xa1 0 IRQ_TYPE_NONE>,
-				     <0 0xa2 0 IRQ_TYPE_NONE>,
-				     <0 0xa3 0 IRQ_TYPE_NONE>;
-		};
-
 		pm8916_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
@@ -71,7 +50,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		pm8916_vadc: vadc@3100 {
+		pm8916_vadc: adc@3100 {
 			compatible = "qcom,spmi-vadc";
 			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
@@ -79,33 +58,62 @@
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
 
-			usb_in {
+			adc-chan@0 {
 				reg = <VADC_USBIN>;
 				qcom,pre-scaling = <1 10>;
 			};
-			vph_pwr {
+			adc-chan@7 {
 				reg = <VADC_VSYS>;
 				qcom,pre-scaling = <1 3>;
 			};
-			die_temp {
+			adc-chan@8 {
 				reg = <VADC_DIE_TEMP>;
 			};
-			ref_625mv {
+			adc-chan@9 {
 				reg = <VADC_REF_625MV>;
 			};
-			ref_1250v {
+			adc-chan@a {
 				reg = <VADC_REF_1250MV>;
 			};
-			ref_gnd {
+			adc-chan@e {
 				reg = <VADC_GND_REF>;
 			};
-			ref_vdd {
+			adc-chan@f {
 				reg = <VADC_VDD_VADC>;
 			};
 		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8916_mpps: mpps@a000 {
+			compatible = "qcom,pm8916-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>;
+		};
+
+		pm8916_gpios: gpios@c000 {
+			compatible = "qcom,pm8916-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>;
+		};
 	};
 
-	pm8916_1: pm8916@1 {
+	pm8916_1: pmic@1 {
 		compatible = "qcom,pm8916", "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
@@ -117,9 +125,9 @@
 			status = "disabled";
 		};
 
-		wcd_codec: codec@f000 {
+		wcd_codec: audio-codec@f000 {
 			compatible = "qcom,pm8916-wcd-analog-codec";
-			reg = <0xf000 0x200>;
+			reg = <0xf000>;
 			reg-names = "pmic-codec-core";
 			clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
 			clock-names = "mclk";
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
index 479ad3ac6c28..08d5d51221cf 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
@@ -13,7 +13,7 @@
 };
 
 &ethernet {
-	status = "ok";
+	status = "okay";
 
 	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 6422cf9d5855..a80c578484ba 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -97,7 +97,7 @@
 };
 
 &pcie {
-	status = "ok";
+	status = "okay";
 
 	perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>;
 
@@ -106,22 +106,22 @@
 };
 
 &pcie_phy {
-	status = "ok";
+	status = "okay";
 
 	vdda-vp-supply = <&vreg_l3_1p05>;
 	vdda-vph-supply = <&vreg_l5_1p8>;
 };
 
 &remoteproc_adsp {
-	status = "ok";
+	status = "okay";
 };
 
 &remoteproc_cdsp {
-	status = "ok";
+	status = "okay";
 };
 
 &remoteproc_wcss {
-	status = "ok";
+	status = "okay";
 };
 
 &rpm_requests {
@@ -215,7 +215,7 @@
 };
 
 &sdcc1 {
-	status = "ok";
+	status = "okay";
 
 	supports-cqe;
 	mmc-ddr-1_8v;
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
new file mode 100644
index 000000000000..1528a865f1f8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -0,0 +1,686 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Robotics RB5";
+	compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
+
+	aliases {
+		serial0 = &uart12;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dc12v: dc12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "DC12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user4 {
+			label = "green:user4";
+			gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "panic-indicator";
+			default-state = "off";
+		};
+
+		wlan {
+			label = "yellow:wlan";
+			gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt {
+			label = "blue:bt";
+			gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+
+	};
+
+	vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+		vin-supply = <&vreg_l11c_3p3>;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vbat_som: vbat-som-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT_SOM";
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vdc_3v3: vdc-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_3V3";
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdc_5v: vdc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_5V";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vreg_l11c_3p3>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+	};
+
+	vreg_s4a_1p8: vreg-s4a-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&apps_rsc {
+	pm8009-rpmh-regulators {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_l1f_1p1: ldo1 {
+			regulator-name = "vreg_l1f_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p2: ldo2 {
+			regulator-name = "vreg_l2f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8150-rpmh-regulators {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p7: ldo7 {
+			regulator-name = "vreg_l7a_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_ts_3p0: ldo13 {
+			regulator-name = "vreg_l13a_ts_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p92: ldo18 {
+			regulator-name = "vreg_l18a_0p92";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8150l-rpmh-regulators {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p2: ldo2 {
+			regulator-name = "vreg_l2c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p7: ldo4 {
+			regulator-name = "vreg_l4c_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_cam_vcm0_2p85: ldo7 {
+			regulator-name = "vreg_l7c_cam_vcm0_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p0: ldo10 {
+			regulator-name = "vreg_l10c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-name = "vreg_l11c_3p3";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3296000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-name = "vreg_s8c_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+/* LS-I2C0 */
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+/* LS-I2C1 */
+&i2c15 {
+	status = "okay";
+};
+
+&pm8150_gpios {
+	gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
+	gpio-line-names =
+		"NC",
+		"OPTION2",
+		"PM_GPIO-F",
+		"PM_SLP_CLK_IN",
+		"OPTION1",
+		"VOL_UP_N",
+		"PM8250_GPIO7", /* Blue LED */
+		"SP_ARI_PWR_ALARM",
+		"GPIO_9_P", /* Yellow LED */
+		"GPIO_10_P"; /* Green LED */
+};
+
+&pm8150b_gpios {
+	gpio-line-names =
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"HAP_BOOST_EN", /* SOM */
+		"SMB_STAT", /* SOM */
+		"NC",
+		"NC",
+		"SDM_FORCE_USB_BOOT",
+		"NC",
+		"NC",
+		"NC";
+};
+
+&pm8150l_gpios {
+	gpio-line-names =
+		"NC",
+		"PM3003A_EN",
+		"NC",
+		"NC",
+		"PM_GPIO5", /* HDMI RST_N */
+		"PM_GPIO-A", /* PWM */
+		"PM_GPIO7",
+		"NC",
+		"NC",
+		"PM_GPIO-B",
+		"NC",
+		"PM3003A_MODE";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+/* CAN */
+&spi0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <40 4>;
+	gpio-line-names =
+		"GPIO-MM",
+		"GPIO-NN",
+		"GPIO-OO",
+		"GPIO-PP",
+		"GPIO-A",
+		"GPIO-C",
+		"GPIO-E",
+		"GPIO-D",
+		"I2C0-SDA",
+		"I2C0-SCL",
+		"GPIO-TT", /* GPIO_10 */
+		"NC",
+		"GPIO_12_I2C_SDA",
+		"GPIO_13_I2C_SCL",
+		"GPIO-X",
+		"GPIO_15_RGMII_INT",
+		"HST_BT_UART_CTS",
+		"HST_BT_UART_RFR",
+		"HST_BT_UART_TX",
+		"HST_BT_UART_RX",
+		"HST_WLAN_EN", /* GPIO_20 */
+		"HST_BT_EN",
+		"GPIO-AAA",
+		"GPIO-BBB",
+		"GPIO-CCC",
+		"GPIO-Z",
+		"GPIO-DDD",
+		"GPIO-BB",
+		"GPIO_28_CAN_SPI_MISO",
+		"GPIO_29_CAN_SPI_MOSI",
+		"GPIO_30_CAN_SPI_CLK", /* GPIO_30 */
+		"GPIO_31_CAN_SPI_CS",
+		"GPIO-UU",
+		"NC",
+		"UART1_TXD_SOM",
+		"UART1_RXD_SOM",
+		"UART0_CTS",
+		"UART0_RTS",
+		"UART0_TXD",
+		"UART0_RXD",
+		"SPI1_MISO", /* GPIO_40 */
+		"SPI1_MOSI",
+		"SPI1_CLK",
+		"SPI1_CS",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"GPIO-F",
+		"GPIO-JJ",
+		"Board_ID1",
+		"Board_ID2",
+		"NC", /* GPIO_50 */
+		"NC",
+		"SPI0_MISO",
+		"SPI0_MOSI",
+		"SPI0_SCLK",
+		"SPI0_CS",
+		"GPIO-QQ",
+		"GPIO-RR",
+		"USB2LAN_RESET",
+		"USB2LAN_EXTWAKE",
+		"NC", /* GPIO_60 */
+		"NC",
+		"NC",
+		"LT9611_INT",
+		"GPIO-AA",
+		"USB_CC_DIR",
+		"GPIO-G",
+		"GPIO-LL",
+		"USB_DP_HPD_1P8",
+		"NC",
+		"NC", /* GPIO_70 */
+		"SD_CMD",
+		"SD_DAT3",
+		"SD_SCLK",
+		"SD_DAT2",
+		"SD_DAT1",
+		"SD_DAT0", /* BOOT_CFG3 */
+		"SD_UFS_CARD_DET_N",
+		"GPIO-II",
+		"PCIE0_RST_N",
+		"PCIE0_CLK_REQ_N", /* GPIO_80 */
+		"PCIE0_WAKE_N",
+		"GPIO-CC",
+		"GPIO-DD",
+		"GPIO-EE",
+		"GPIO-FF",
+		"GPIO-GG",
+		"GPIO-HH",
+		"GPIO-VV",
+		"GPIO-WW",
+		"NC", /* GPIO_90 */
+		"NC",
+		"GPIO-K",
+		"GPIO-I",
+		"CSI0_MCLK",
+		"CSI1_MCLK",
+		"CSI2_MCLK",
+		"CSI3_MCLK",
+		"GPIO-AA", /* CSI4_MCLK */
+		"GPIO-BB", /* CSI5_MCLK */
+		"GPIO-KK", /* GPIO_100 */
+		"CCI_I2C_SDA0",
+		"CCI_I2C_SCL0",
+		"CCI_I2C_SDA1",
+		"CCI_I2C_SCL1",
+		"CCI_I2C_SDA2",
+		"CCI_I2C_SCL2",
+		"CCI_I2C_SDA3",
+		"CCI_I2C_SCL3",
+		"GPIO-L",
+		"NC", /* GPIO_110 */
+		"NC",
+		"ACCEL_INT",
+		"GYRO_INT",
+		"GPIO-J",
+		"GPIO-YY",
+		"GPIO-H",
+		"GPIO-ZZ",
+		"NC",
+		"NC",
+		"NC", /* GPIO_120 */
+		"NC",
+		"MAG_INT",
+		"MAG_DRDY_INT",
+		"HST_SW_CTRL",
+		"GPIO-M",
+		"GPIO-N",
+		"GPIO-O",
+		"GPIO-P",
+		"PS_INT",
+		"WSA1_EN", /* GPIO_130 */
+		"USB_HUB_RESET",
+		"SDM_FORCE_USB_BOOT",
+		"I2S1_CLK_HDMI",
+		"I2S1_DATA0_HDMI",
+		"I2S1_WS_HDMI",
+		"GPIO-B",
+		"GPIO_137", /* To LT9611_I2S_MCLK_3V3 */
+		"PCM_CLK",
+		"PCM_DI",
+		"PCM_DO", /* GPIO_140 */
+		"PCM_FS",
+		"HST_SLIM_CLK",
+		"HST_SLIM_DATA",
+		"GPIO-U",
+		"GPIO-Y",
+		"GPIO-R",
+		"GPIO-Q",
+		"GPIO-S",
+		"GPIO-T",
+		"GPIO-V", /* GPIO_150 */
+		"GPIO-W",
+		"DMIC_CLK1",
+		"DMIC_DATA1",
+		"DMIC_CLK2",
+		"DMIC_DATA2",
+		"WSA_SWR_CLK",
+		"WSA_SWR_DATA",
+		"DMIC_CLK3",
+		"DMIC_DATA3",
+		"I2C4_SDA", /* GPIO_160 */
+		"I2C4_SCL",
+		"SPI3_CS1",
+		"SPI3_CS2",
+		"SPI2_MISO_LS3",
+		"SPI2_MOSI_LS3",
+		"SPI2_CLK_LS3",
+		"SPI2_ACCEL_CS_LS3",
+		"SPI2_CS1",
+		"NC",
+		"GPIO-SS", /* GPIO_170 */
+		"GPIO-XX",
+		"SPI3_MISO",
+		"SPI3_MOSI",
+		"SPI3_CLK",
+		"SPI3_CS",
+		"HST_BLE_SNS_UART_TX",
+		"HST_BLE_SNS_UART_RX",
+		"HST_WLAN_UART_TX",
+		"HST_WLAN_UART_RX";
+};
+
+&uart12 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-max-microamp = <89900>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	vdda-pll-max-microamp = <18800>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index d8b550723b32..e77a7926034a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -346,6 +346,13 @@
 &uart3 {
 	status = "okay";
 
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+				<&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart3_sleep>;
+
 	bluetooth: wcn3990-bt {
 		compatible = "qcom,wcn3990-bt";
 		vddio-supply = <&vreg_l10a_1p8>;
@@ -353,7 +360,6 @@
 		vddrf-supply = <&vreg_l2c_1p3>;
 		vddch0-supply = <&vreg_l10c_3p3>;
 		max-speed = <3200000>;
-		clocks = <&rpmhcc RPMH_RF_CLK2>;
 	};
 };
 
@@ -474,32 +480,30 @@
 &qup_uart3_default {
 	pinconf-cts {
 		/*
-		 * Configure a pull-down on 38 (CTS) to match the pull of
+		 * Configure a pull-down on CTS to match the pull of
 		 * the Bluetooth module.
 		 */
 		pins = "gpio38";
 		bias-pull-down;
-		output-high;
 	};
 
 	pinconf-rts {
-		/* We'll drive 39 (RTS), so no pull */
+		/* We'll drive RTS, so no pull */
 		pins = "gpio39";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
 	pinconf-tx {
-		/* We'll drive 40 (TX), so no pull */
+		/* We'll drive TX, so no pull */
 		pins = "gpio40";
 		drive-strength = <2>;
 		bias-disable;
-		output-high;
 	};
 
 	pinconf-rx {
 		/*
-		 * Configure a pull-up on 41 (RX). This is needed to avoid
+		 * Configure a pull-up on RX. This is needed to avoid
 		 * garbage data when the TX pin of the Bluetooth module is
 		 * in tri-state (module powered off or not driving the
 		 * signal yet).
@@ -547,3 +551,51 @@
 	};
 };
 
+&tlmm {
+	qup_uart3_sleep: qup-uart3-sleep {
+		pinmux {
+			pins = "gpio38", "gpio39",
+			       "gpio40", "gpio41";
+			function = "gpio";
+		};
+
+		pinconf-cts {
+			/*
+			 * Configure a pull-down on CTS to match the pull of
+			 * the Bluetooth module.
+			 */
+			pins = "gpio38";
+			bias-pull-down;
+		};
+
+		pinconf-rts {
+			/*
+			 * Configure pull-down on RTS. As RTS is active low
+			 * signal, pull it low to indicate the BT SoC that it
+			 * can wakeup the system anytime from suspend state by
+			 * pulling RX low (by sending wakeup bytes).
+			 */
+			 pins = "gpio39";
+			 bias-pull-down;
+		};
+
+		pinconf-tx {
+			/*
+			 * Configure pull-up on TX when it isn't actively driven
+			 * to prevent BT SoC from receiving garbage during sleep.
+			 */
+			pins = "gpio40";
+			bias-pull-up;
+		};
+
+		pinconf-rx {
+			/*
+			 * Configure a pull-up on RX. This is needed to avoid
+			 * garbage data when the TX pin of the Bluetooth module
+			 * is floating which may cause spurious wakeups.
+			 */
+			pins = "gpio41";
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
new file mode 100644
index 000000000000..ae4c23a4fe65
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-lazor.dtsi"
+
+/ {
+	model = "Google Lazor (rev0)";
+	compatible = "google,lazor-rev0", "qcom,sc7180";
+};
+
+&sn65dsi86_out {
+	/*
+	 * Lane 0 was incorrectly mapped on the cable, but we've now decided
+	 * that the cable is canon and in -rev1+ we'll make a board change
+	 * that means we no longer need the swizzle.
+	 */
+	lane-polarities = <1 0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts
new file mode 100644
index 000000000000..c3f426c3c30a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-lazor-r1.dts"
+
+/ {
+	model = "Google Lazor (rev1+) with KB Backlight";
+	compatible = "google,lazor-sku2", "qcom,sc7180";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
new file mode 100644
index 000000000000..73e59cf7752a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-lazor-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor (rev1+) with LTE";
+	compatible = "google,lazor-sku0", "qcom,sc7180";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
new file mode 100644
index 000000000000..3151ae31c1cc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-lazor.dtsi"
+
+/ {
+	model = "Google Lazor (rev1+)";
+	compatible = "google,lazor", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
new file mode 100644
index 000000000000..180ef9e04306
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180.dtsi"
+
+ap_ec_spi: &spi6 {};
+ap_h1_spi: &spi0 {};
+
+#include "sc7180-trogdor.dtsi"
+
+/ {
+	panel: panel {
+		compatible = "boe,nv133fhm-n62";
+		power-supply = <&pp3300_dx_edp>;
+		backlight = <&backlight>;
+		hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&sn65dsi86_out>;
+				};
+			};
+		};
+	};
+};
+
+&ap_sar_sensor {
+	status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+
+		vdd-supply = <&pp3300_ts>;
+	};
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&ts_reset_l {
+	pinconf {
+		/* This pin is not connected on -rev0, pull up to park. */
+		/delete-property/bias-disable;
+		bias-pull-up;
+	};
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "ESIM_MISO",
+			  "ESIM_MOSI",
+			  "ESIM_CLK",
+			  "ESIM_CS_L",
+			  "",
+			  "",
+			  "AP_TP_I2C_SDA",
+			  "AP_TP_I2C_SCL",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "AP_RAM_ID2",
+			  "",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "HUB_RST_L",
+			  "",
+			  "AP_RAM_ID1",
+			  "AP_SKU_ID2",
+			  "",
+			  "",
+			  "AMP_EN",
+			  "P_SENSOR_INT_L",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "HP_IRQ",
+			  "AP_RAM_ID0",
+			  "EN_PP3300_DX_EDP",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "",
+			  "",
+			  "AMP_DIN",
+			  "",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "TRACKPAD_INT_1V8_ODL",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "DBG_SPI_HOLD_L",
+			  "AP_SPI_CS0_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "EN_PP3300_CODEC",
+			  "EN_PP3300_HUB",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "AP_SKU_ID0",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi
new file mode 100644
index 000000000000..44956e3165a1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for LTE SKUs
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+&ap_sar_sensor {
+	label = "proximity-wifi-lte";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn",
+			"qcom/sc7180-trogdor/modem/qdsp6sw.mbn";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts
new file mode 100644
index 000000000000..1123c02bd539
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Trogdor (rev1+) with LTE";
+	compatible = "google,trogdor-sku0", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
new file mode 100644
index 000000000000..0a281c24841c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+
+ap_ec_spi: &spi6 {};
+ap_h1_spi: &spi0 {};
+
+#include "sc7180-trogdor.dtsi"
+
+/ {
+	model = "Google Trogdor (rev1+)";
+	compatible = "google,trogdor", "qcom,sc7180";
+
+	panel: panel {
+		compatible = "auo,b116xa01";
+		power-supply = <&pp3300_dx_edp>;
+		backlight = <&backlight>;
+		hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&sn65dsi86_out>;
+				};
+			};
+		};
+	};
+};
+
+&ap_sar_sensor_i2c {
+	/* Not hooked up */
+	status = "disabled";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&pp3300_ts>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "ESIM_MISO",
+			  "ESIM_MOSI",
+			  "ESIM_CLK",
+			  "ESIM_CS_L",
+			  "FP_TO_AP_IRQ_L",
+			  "FP_RST_L",
+			  "AP_TP_I2C_SDA",
+			  "AP_TP_I2C_SCL",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "FPMCU_BOOT0",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "",
+			  "",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "HUB_RST_L",
+			  "PEN_RST_ODL",
+			  "AP_RAM_ID1",
+			  "AP_RAM_ID2",
+			  "PEN_IRQ_L",
+			  "FPMCU_SEL",
+			  "AMP_EN",
+			  "P_SENSOR_INT_L",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "HP_IRQ",
+			  "AP_RAM_ID0",
+			  "EN_PP3300_DX_EDP",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "",
+			  "",
+			  "AMP_DIN",
+			  "PEN_PDCT_L",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "TRACKPAD_INT_1V8_ODL",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "DBG_SPI_HOLD_L",
+			  "AP_SPI_CS0_L",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "EN_PP3300_CODEC",
+			  "EN_PP3300_HUB",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "AP_SKU_ID0",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
new file mode 100644
index 000000000000..bf875589d364
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -0,0 +1,1402 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor device tree source (common between revisions)
+ *
+ * Copyright 2019 Google LLC.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/* PMICs depend on spmi_bus label and so must come after SoC */
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/*
+ * Reserved memory changes
+ *
+ * Delete all unused memory nodes and define the peripheral memory regions
+ * required by the board dts.
+ */
+
+/delete-node/ &hyp_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &aop_mem;
+/delete-node/ &sec_apps_mem;
+/delete-node/ &tz_mem;
+
+/* Increase the size from 2MB to 8MB */
+&rmtfs_mem {
+	reg = <0x0 0x84400000 0x0 0x800000>;
+};
+
+/ {
+	reserved-memory {
+		atf_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		mpss_mem: memory@86000000 {
+			reg = <0x0 0x86000000 0x0 0x8c00000>;
+			no-map;
+		};
+
+		camera_mem: memory@8ec00000 {
+			reg = <0x0 0x8ec00000 0x0 0x500000>;
+			no-map;
+		};
+
+		venus_mem: memory@8f600000 {
+			reg = <0 0x8f600000 0 0x500000>;
+			no-map;
+		};
+
+		wlan_mem: memory@94100000 {
+			reg = <0x0 0x94100000 0x0 0x200000>;
+			no-map;
+		};
+
+		mba_mem: memory@94400000 {
+			reg = <0x0 0x94400000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		bluetooth0 = &bluetooth;
+		hsuart0 = &uart3;
+		serial0 = &uart8;
+		wifi0 = &wifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* FIXED REGULATORS - parents above children */
+
+	/* This is the top level supply and variable voltage */
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* This divides ppvar_sys by 2, so voltage is variable */
+	src_vph_pwr: src-vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "src_vph_pwr";
+
+		/* EC turns on with switchcap_on; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000_a: pp5000-a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_a";
+
+		/* EC turns on with en_pp5000_a; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_a: pp3300-a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_a";
+
+		/* EC turns on with en_pp3300_a; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * Actually should be pp3300 but that's practically an alias for
+		 * pp3300_a so we use pp3300's vin-supply here to avoid one more
+		 * node.
+		 */
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_audio:
+	pp3300_codec: pp3300-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_codec";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_codec>;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp3300_dx_edp:
+	pp3300_ts: pp3300-dx-edp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_dx_edp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_dx_edp>;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp3300_fp_tp: pp3300-fp-tp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_fp_tp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/* AP turns on with PP1800_VIO_OUT; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		pwms = <&cros_ec_pwm 1>;
+		enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+		power-supply = <&ppvar_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_edp_bklten>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		status = "disabled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_pdct_l>;
+
+		pen-insert {
+			label = "Pen Insert";
+
+			/* Insert = low, eject = high */
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_PEN_INSERTED>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+	};
+
+	max98357a: audio-codec-0 {
+		compatible = "maxim,max98357a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&amp_en>;
+		sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+		keyboard_backlight: keyboard-backlight {
+			status = "disabled";
+			label = "cros_ec::kbd_backlight";
+			pwms = <&cros_ec_pwm 0>;
+			max-brightness = <1023>;
+		};
+	};
+};
+
+&qfprom {
+	vcc-supply = <&pp1800_l11a>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		/* TODO: Increase frequency after testing */
+		spi-max-frequency = <25000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&apps_rsc {
+	pm6150-rpmh-regulators {
+		compatible = "qcom,pm6150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vddpx_1:
+		vdd2:
+		pp1125_s1a: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		/*
+		 * pp2040_s5a (smps5) and pp1056_s4a (smps4) are just
+		 * inputs to other rails on AOP-managed PMICs on trogdor.
+		 * The system is already configured to manage these rails
+		 * automatically (enable when needed, adjust voltage for
+		 * headroom) so we won't specify anything here.
+		 *
+		 * NOTE: though the rails have a voltage implied by their
+		 * name, the automatic headroom calculation might not result
+		 * in them being that voltage.  ...and that's OK.
+		 * Specifically the only point of these rails is to provide
+		 * an input source for other rails and if we can satisify the
+		 * needs of those other rails with a lower source voltage then
+		 * we save power.
+		 */
+
+		pp1200_l1a: ldo1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1000_l2a: ldo2 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1000_l3a: ldo3 {
+			regulator-min-microvolt = <968000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qlink_lv:
+		vdd_qlink_lv_ck:
+		vdd_qusb_hs0_core:
+		vdd_ufs1_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_csi3_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_pll_cc_ebi01:
+		vdda_qrefs_0p9:
+		vdda_usb_ss_dp_core:
+		pp900_l4a: ldo4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp2700_l5a: ldo5 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ebi0_cal:
+		ebi1_cal:
+		vddio_ck_ebi0:
+		vddio_ck_ebi1:
+		vddio_ebi0:
+		vddq:
+		pp600_l6a: ldo6 {
+			regulator-min-microvolt = <568000>;
+			regulator-max-microvolt = <648000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_cx_wlan:
+		pp800_l9a: ldo9 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd1:
+		vddpx_3:
+		vddpx_7:
+		vio_in:
+		pp1800_l10a: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdda_apc1_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_bb_clk:
+		pp1800_l11a: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		mcp_vccq:
+		pp1800_l12a_r: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_l13a: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_prox:
+		pp1800_l14a: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_alc5682:
+		pp1800_l15a: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp2700_l16a: ldo16 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vdd_pdphy:
+		pp3100_l17a: ldo17 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_pen:
+		pp1800_l18a: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		mcp_vcc:
+		pp2850_l19a: ldo19 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm6150l-rpmh-regulators {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		pp1300_s8c: smps8 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+		};
+
+		pp1800_l1c: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_adc_dac:
+		pp1300_l2c: ldo2 {
+			regulator-min-microvolt = <1168000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1200_brij:
+		vdd_ufs1_1p2:
+		vdda_csi0_1p25:
+		vdda_csi1_1p25:
+		vdda_csi2_1p25:
+		vdda_csi3_1p25:
+		vdda_hv_ebi0:
+		vdda_mipi_dsi0_1p2:
+		vdda_usb_ss_dp_1p2:
+		vddpx_10:
+		pp1200_l3c: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ld_pp1800_esim_l4c:
+		vddpx_5:
+		pp1800_l4c: ldo4 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_6:
+		pp1800_l5c: ldo5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		ppvar_l6c: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_hub:
+		pp3300_l7c: ldo7 {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pp1800_brij_vccio:
+		pp1800_edp_vpll:
+		pp1800_l8c: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp2950_l9c: ldo9 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_l10c: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_l11c: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&ap_ec_spi {
+	status = "okay";
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_ec_int_l>;
+		spi-max-frequency = <3000000>;
+
+		cros_ec_pwm: ec-pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pdupdate {
+			compatible = "google,cros-ec-pd-update";
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+&ap_h1_spi {
+	status = "okay";
+	cr50: tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_ap_int_odl>;
+		spi-max-frequency = <800000>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <42 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&sn65dsi86_in>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&dsi_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+edp_brij_i2c: &i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sn65dsi86_bridge: bridge@2d {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+
+		vpll-supply = <&pp1800_edp_vpll>;
+		vccio-supply = <&pp1800_brij_vccio>;
+		vcca-supply = <&pp1200_brij>;
+		vcc-supply = <&pp1200_brij>;
+
+		clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
+		clock-names = "refclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					data-lanes = <0 1>;
+					remote-endpoint = <&panel_in_edp>;
+				};
+			};
+		};
+	};
+};
+
+ap_sar_sensor_i2c: &i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_sar_sensor: proximity@28 {
+		compatible = "semtech,sx9310";
+		reg = <0x28>;
+		#io-channel-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&p_sensor_int_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&pp3300_a>;
+		svdd-supply = <&pp1800_prox>;
+
+		status = "disabled";
+		label = "proximity-wifi";
+	};
+};
+
+ap_tp_i2c: &i2c7 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_int_1v8_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+
+		vcc-supply = <&pp3300_fp_tp>;
+
+		wakeup-source;
+	};
+};
+
+hp_i2c: &i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682i";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		/*
+		 * This will get ignored because the interrupt type
+		 * is set in rt5682.c.
+		 */
+		interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+		VBAT-supply = <&pp3300_audio>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <1>;
+		realtek,jd-src = <1>;
+	};
+};
+
+&ipa {
+	status = "okay";
+
+	/*
+	 * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the
+	 * modem needs to cover certain init steps (GSI init), and
+	 * the AP needs to wait for it.
+	 */
+	modem-init;
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&pm6150_pwrkey {
+	status = "disabled";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	compatible = "qcom,sc7180-mss-pil";
+	iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
+	memory-region = <&mba_mem &mpss_mem>;
+
+	/* This gets overridden for SKUs with LTE support. */
+	firmware-name = "qcom/sc7180-trogdor/modem-nolte/mba.mbn",
+			"qcom/sc7180-trogdor/modem-nolte/qdsp6sw.mbn";
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+	vmmc-supply = <&mcp_vcc>;
+	vqmmc-supply = <&mcp_vccq>;
+};
+
+&sdhc_2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	vmmc-supply = <&pp2950_l9c>;
+	vqmmc-supply = <&ppvar_l6c>;
+
+	cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+};
+
+ap_spi_fp: &spi10 {
+	cros_ec_fp: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>, <&fpmcu_sel>;
+		spi-max-frequency = <3000000>;
+	};
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&uart3 {
+	status = "okay";
+
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+				<&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart3_sleep>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn3991-bt";
+		vddio-supply = <&pp1800_l10a>;
+		vddxo-supply = <&pp1800_l1c>;
+		vddrf-supply = <&pp1300_l2c>;
+		vddch0-supply = <&pp3300_l10c>;
+		max-speed = <3200000>;
+		clocks = <&rpmhcc RPMH_RF_CLK2>;
+	};
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdd-supply = <&vdd_qusb_hs0_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+	qcom,imp-res-offset-value = <8>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	qcom,bias-ctrl-value = <0x22>;
+	qcom,charge-ctrl-value = <3>;
+	qcom,hsdisc-trim-value = <0>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vdda_usb_ss_dp_1p2>;
+	vdda-pll-supply = <&vdda_usb_ss_dp_core>;
+};
+
+&venus {
+	video-firmware {
+		iommus = <&apps_smmu 0x0c42 0x0>;
+	};
+};
+
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vdd_cx_wlan>;
+	vdd-1.8-xo-supply = <&pp1800_l1c>;
+	vdd-1.3-rfa-supply = <&pp1300_l2c>;
+	vdd-3.3-ch0-supply = <&pp3300_l10c>;
+	vdd-3.3-ch1-supply = <&pp3300_l11c>;
+
+	wifi-firmware {
+		iommus = <&apps_smmu 0xc2 0x1>;
+	};
+};
+
+/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+
+&qspi_cs0 {
+	pinconf {
+		pins = "gpio68";
+		bias-disable;
+	};
+};
+
+&qspi_clk {
+	pinconf {
+		pins = "gpio63";
+		bias-disable;
+	};
+};
+
+&qspi_data01 {
+	pinconf {
+		pins = "gpio64", "gpio65";
+
+		/* High-Z when no transfers; nice to park the lines */
+		bias-pull-up;
+	};
+};
+
+&qup_i2c2_default {
+	pinconf {
+		pins = "gpio15", "gpio16";
+		drive-strength = <2>;
+
+		/* Has external pullup */
+		bias-disable;
+	};
+};
+
+&qup_i2c4_default {
+	pinconf {
+		pins = "gpio115", "gpio116";
+		drive-strength = <2>;
+
+		/* Has external pullup */
+		bias-disable;
+	};
+};
+
+&qup_i2c5_default {
+	pinconf {
+		pins = "gpio25", "gpio26";
+		drive-strength = <2>;
+
+		/* Has external pullup */
+		bias-disable;
+	};
+};
+
+&qup_i2c7_default {
+	pinconf {
+		pins = "gpio6", "gpio7";
+		drive-strength = <2>;
+
+		/* Has external pullup */
+		bias-disable;
+	};
+};
+
+&qup_i2c9_default {
+	pinconf {
+		pins = "gpio46", "gpio47";
+		drive-strength = <2>;
+
+		/* Has external pullup */
+		bias-disable;
+	};
+};
+
+&qup_spi0_default {
+	pinconf {
+		pins = "gpio34", "gpio35", "gpio36", "gpio37";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&qup_spi6_default {
+	pinconf {
+		pins = "gpio59", "gpio60", "gpio61", "gpio62";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&qup_spi10_default {
+	pinconf {
+		pins = "gpio86", "gpio87", "gpio88", "gpio89";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&qup_uart3_default {
+	pinconf-cts {
+		/*
+		 * Configure a pull-down on CTS to match the pull of
+		 * the Bluetooth module.
+		 */
+		pins = "gpio38";
+		bias-pull-down;
+	};
+
+	pinconf-rts-tx {
+		/* We'll drive RTS and TX, so no pull */
+		pins = "gpio39", "gpio40";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pinconf-rx {
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module is
+		 * in tri-state (module powered off or not driving the
+		 * signal yet).
+		 */
+		pins = "gpio41";
+		bias-pull-up;
+	};
+};
+
+&qup_uart8_default {
+	pinconf-tx {
+		pins = "gpio44";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pinconf-rx {
+		pins = "gpio45";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&pm6150_gpio {
+	status = "disabled"; /* No GPIOs are connected */
+};
+
+&pm6150l_gpio {
+	gpio-line-names = "AP_SUSPEND",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "";
+};
+
+&tlmm {
+	/*
+	 * pinctrl settings for pins that have no real owners.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&bios_flash_wp_l>, <&ap_suspend_l_neuter>;
+
+	amp_en: amp-en {
+		pinmux {
+			pins = "gpio23";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio23";
+			bias-pull-down;
+		};
+	};
+
+	ap_ec_int_l: ap-ec-int-l {
+		pinmux {
+			pins = "gpio94";
+			function = "gpio";
+			input-enable;
+		};
+
+		pinconf {
+			pins = "gpio94";
+			bias-pull-up;
+		};
+	};
+
+	ap_edp_bklten: ap-edp-bklten {
+		pinmux {
+			pins = "gpio12";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio12";
+			drive-strength = <2>;
+			bias-disable;
+
+			/* Force backlight to be disabled to match state at boot. */
+			output-low;
+		};
+	};
+
+	ap_suspend_l_neuter: ap-suspend-l-neuter {
+		pinmux  {
+			pins = "gpio27";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio27";
+			bias-disable;
+		};
+	};
+
+	bios_flash_wp_l: bios-flash-wp-l {
+		pinmux {
+			pins = "gpio66";
+			function = "gpio";
+			input-enable;
+		};
+
+		pinconf {
+			pins = "gpio66";
+			bias-disable;
+		};
+	};
+
+	dp_hot_plug_det: dp-hot-plug-det {
+		 pinmux {
+			 pins = "gpio117";
+			 function = "dp_hot";
+		 };
+
+		 config {
+			 pins = "gpio117";
+			 bias-disable;
+			 input-enable;
+			 drive-strength = <2>;
+		 };
+	 };
+
+	edp_brij_en: edp-brij-en {
+		pinmux {
+			pins = "gpio104";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio104";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	edp_brij_irq: edp-brij-irq {
+		pinmux {
+			pins = "gpio11";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio11";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	en_pp3300_codec: en-pp3300-codec {
+		pinmux {
+			pins = "gpio83";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio83";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	en_pp3300_dx_edp: en-pp3300-dx-edp {
+		pinmux {
+			pins = "gpio30";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio30";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	fpmcu_boot0: fpmcu-boot0 {
+		pinmux {
+			pins = "gpio10";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio10";
+			bias-disable;
+			drive-strength = <2>;
+			output-low;
+		};
+	};
+
+	fpmcu_sel: fpmcu-sel {
+		pinmux {
+			pins = "gpio22";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio22";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+	};
+
+	fp_rst_l: fp-rst-l {
+		pinmux {
+			pins = "gpio5";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio5";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+	};
+
+	fp_to_ap_irq_l: fp-to-ap-irq-l {
+		pinmux {
+			pins = "gpio4";
+			function = "gpio";
+			input-enable;
+		};
+
+		pinconf {
+			pins = "gpio4";
+
+			/* Has external pullup */
+			bias-disable;
+		};
+	};
+
+
+	h1_ap_int_odl: h1-ap-int-odl {
+		pinmux {
+			pins = "gpio42";
+			function = "gpio";
+			input-enable;
+		};
+
+		pinconf {
+			pins = "gpio42";
+			bias-pull-up;
+		};
+	};
+
+	hp_irq: hp-irq {
+		pinmux {
+			pins = "gpio28";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio28";
+			bias-pull-up;
+		};
+	};
+
+	pen_irq_l: pen-irq-l {
+		pinmux {
+			pins = "gpio21";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio21";
+
+			/* Has external pullup */
+			bias-disable;
+		};
+	};
+
+	pen_pdct_l: pen-pdct-l {
+		pinmux {
+			pins = "gpio52";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio52";
+
+			/* Has external pullup */
+			bias-disable;
+		};
+	};
+
+	pen_rst_odl: pen-rst-odl {
+		pinmux  {
+			pins = "gpio18";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio18";
+			bias-disable;
+			drive-strength = <2>;
+
+			/*
+			 * The pen driver doesn't currently support
+			 * driving this reset line.  By specifying
+			 * output-high here we're relying on the fact
+			 * that this pin has a default pulldown at boot
+			 * (which makes sure the pen was in reset if it
+			 * was powered) and then we set it high here to
+			 * take it out of reset.  Better would be if the
+			 * pen driver could control this and we could
+			 * remove "output-high" here.
+			 */
+			output-high; /* TODO: Remove this? */
+		};
+	};
+
+	p_sensor_int_l: p-sensor-int-l {
+		pinmux {
+			pins = "gpio24";
+			function = "gpio";
+			input-enable;
+		};
+
+		pinconf {
+			pins = "gpio24";
+			bias-pull-up;
+		};
+	};
+
+	qup_uart3_sleep: qup-uart3-sleep {
+		pinmux {
+			pins = "gpio38", "gpio39",
+			       "gpio40", "gpio41";
+			function = "gpio";
+		};
+
+		pinconf-cts {
+			/*
+			 * Configure a pull-down on CTS to match the pull of
+			 * the Bluetooth module.
+			 */
+			pins = "gpio38";
+			bias-pull-down;
+		};
+
+		pinconf-rts {
+			/*
+			 * Configure pull-down on RTS. As RTS is active low
+			 * signal, pull it low to indicate the BT SoC that it
+			 * can wakeup the system anytime from suspend state by
+			 * pulling RX low (by sending wakeup bytes).
+			 */
+			 pins = "gpio39";
+			 bias-pull-down;
+		};
+
+		pinconf-tx {
+			/*
+			 * Configure pull-up on TX when it isn't actively driven
+			 * to prevent BT SoC from receiving garbage during sleep.
+			 */
+			pins = "gpio40";
+			bias-pull-up;
+		};
+
+		pinconf-rx {
+			/*
+			 * Configure a pull-up on RX. This is needed to avoid
+			 * garbage data when the TX pin of the Bluetooth module
+			 * is floating which may cause spurious wakeups.
+			 */
+			pins = "gpio41";
+			bias-pull-up;
+		};
+	};
+
+	trackpad_int_1v8_odl: trackpad-int-1v8-odl {
+		pinmux {
+			pins = "gpio58";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio58";
+
+			/* Has external pullup */
+			bias-disable;
+		};
+	};
+
+	ts_int_l: ts-int-l {
+		pinmux  {
+			pins = "gpio9";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio9";
+			bias-pull-up;
+		};
+	};
+
+	ts_reset_l: ts-reset-l {
+		pinmux  {
+			pins = "gpio8";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio8";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index d46b3833e52f..6678f1e8e395 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
 #include <dt-bindings/clock/qcom,gcc-sc7180.h>
 #include <dt-bindings/clock/qcom,gpucc-sc7180.h>
+#include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sc7180.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
@@ -132,7 +133,7 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			next-level-cache = <&L2_0>;
 			#cooling-cells = <2>;
@@ -158,7 +159,7 @@
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_100>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -180,7 +181,7 @@
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_200>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -202,7 +203,7 @@
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_300>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -224,7 +225,7 @@
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_400>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -246,7 +247,7 @@
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_500>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -268,7 +269,7 @@
 			dynamic-power-coefficient = <405>;
 			next-level-cache = <&L2_600>;
 			operating-points-v2 = <&cpu6_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -290,7 +291,7 @@
 			dynamic-power-coefficient = <405>;
 			next-level-cache = <&L2_700>;
 			operating-points-v2 = <&cpu6_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -690,6 +691,9 @@
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 					<&gcc GCC_SDCC1_AHB_CLK>;
 			clock-names = "core", "iface";
+			interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
 			power-domains = <&rpmhpd SC7180_CX>;
 			operating-points-v2 = <&sdhc1_opp_table>;
 
@@ -710,11 +714,15 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <100000 100000>;
+					opp-avg-kBps = <100000 50000>;
 				};
 
 				opp-384000000 {
 					opp-hz = /bits/ 64 <384000000>;
 					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <600000 900000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -748,7 +756,7 @@
 			#size-cells = <2>;
 			ranges;
 			iommus = <&apps_smmu 0x43 0x0>;
-			interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>;
+			interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>;
 			interconnect-names = "qup-core";
 			status = "disabled";
 
@@ -762,9 +770,9 @@
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
-						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -782,8 +790,8 @@
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -798,8 +806,8 @@
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -814,9 +822,9 @@
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
-						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -834,8 +842,8 @@
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -850,8 +858,8 @@
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -866,9 +874,9 @@
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
-						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -884,8 +892,8 @@
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -900,9 +908,9 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
-						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -920,8 +928,8 @@
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -936,8 +944,8 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -952,9 +960,9 @@
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
-						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -970,8 +978,8 @@
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -986,9 +994,9 @@
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
-						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1006,8 +1014,8 @@
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1022,8 +1030,8 @@
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1039,7 +1047,7 @@
 			#size-cells = <2>;
 			ranges;
 			iommus = <&apps_smmu 0x4c3 0x0>;
-			interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>;
+			interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>;
 			interconnect-names = "qup-core";
 			status = "disabled";
 
@@ -1053,9 +1061,9 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
-						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1073,8 +1081,8 @@
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1089,8 +1097,8 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1105,9 +1113,9 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
-						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1123,8 +1131,8 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1139,9 +1147,9 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
-						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1159,8 +1167,8 @@
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1175,8 +1183,8 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1191,9 +1199,9 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
-						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1209,8 +1217,8 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1225,9 +1233,9 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
-						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1245,8 +1253,8 @@
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1261,8 +1269,8 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1277,9 +1285,9 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
-						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1297,8 +1305,8 @@
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1313,8 +1321,8 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1323,63 +1331,63 @@
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sc7180-config-noc";
 			reg = <0 0x01500000 0 0x28000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		system_noc: interconnect@1620000 {
 			compatible = "qcom,sc7180-system-noc";
 			reg = <0 0x01620000 0 0x17080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		mc_virt: interconnect@1638000 {
 			compatible = "qcom,sc7180-mc-virt";
 			reg = <0 0x01638000 0 0x1000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		qup_virt: interconnect@1650000 {
 			compatible = "qcom,sc7180-qup-virt";
 			reg = <0 0x01650000 0 0x1000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		aggre1_noc: interconnect@16e0000 {
 			compatible = "qcom,sc7180-aggre1-noc";
 			reg = <0 0x016e0000 0 0x15080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		aggre2_noc: interconnect@1705000 {
 			compatible = "qcom,sc7180-aggre2-noc";
 			reg = <0 0x01705000 0 0x9000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		compute_noc: interconnect@170e000 {
 			compatible = "qcom,sc7180-compute-noc";
 			reg = <0 0x0170e000 0 0x6000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		mmss_noc: interconnect@1740000 {
 			compatible = "qcom,sc7180-mmss-noc";
 			reg = <0 0x01740000 0 0x1c100>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		ipa_virt: interconnect@1e00000 {
 			compatible = "qcom,sc7180-ipa-virt";
 			reg = <0 0x01e00000 0 0x1000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
@@ -1406,9 +1414,9 @@
 			clocks = <&rpmhcc RPMH_IPA_CLK>;
 			clock-names = "core";
 
-			interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
-				        <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>,
-					<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
 			interconnect-names = "memory",
 					     "imem",
 					     "config";
@@ -1447,6 +1455,19 @@
 			gpio-ranges = <&tlmm 0 0 120>;
 			wakeup-parent = <&pdc>;
 
+			dp_hot_plug_det: dp-hot-plug-det {
+				pinmux {
+					pins = "gpio117";
+					function = "dp_hot";
+				};
+
+				pinconf {
+					pins = "gpio117";
+					bias-disable;
+					input-enable;
+				};
+			};
+
 			qspi_clk: qspi-clk {
 				pinmux {
 					pins = "gpio63";
@@ -1886,7 +1907,7 @@
 			operating-points-v2 = <&gpu_opp_table>;
 			qcom,gmu = <&gmu>;
 
-			interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>;
+			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
 			interconnect-names = "gfx-mem";
 
 			gpu_opp_table: opp-table {
@@ -2502,6 +2523,10 @@
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 					<&gcc GCC_SDCC2_AHB_CLK>;
 			clock-names = "core", "iface";
+
+			interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
 			power-domains = <&rpmhpd SC7180_CX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 
@@ -2515,11 +2540,15 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <160000 100000>;
+					opp-avg-kBps = <80000 50000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <200000	120000>;
+					opp-avg-kBps = <100000 60000>;
 				};
 			};
 		};
@@ -2552,8 +2581,8 @@
 			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 				 <&gcc GCC_QSPI_CORE_CLK>;
 			clock-names = "iface", "core";
-			interconnects = <&gem_noc MASTER_APPSS_PROC
-					&config_noc SLAVE_QSPI_0>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 0
+					&config_noc SLAVE_QSPI_0 0>;
 			interconnect-names = "qspi-config";
 			power-domains = <&rpmhpd SC7180_CX>;
 			operating-points-v2 = <&qspi_opp_table>;
@@ -2612,13 +2641,13 @@
 		dc_noc: interconnect@9160000 {
 			compatible = "qcom,sc7180-dc-noc";
 			reg = <0 0x09160000 0 0x03200>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc7180-llcc";
-			reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
+			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
 			reg-names = "llcc_base", "llcc_broadcast_base";
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
@@ -2626,14 +2655,14 @@
 		gem_noc: interconnect@9680000 {
 			compatible = "qcom,sc7180-gem-noc";
 			reg = <0 0x09680000 0 0x3e200>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		npu_noc: interconnect@9990000 {
 			compatible = "qcom,sc7180-npu-noc";
 			reg = <0 0x09990000 0 0x1600>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
@@ -2669,8 +2698,8 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			interconnects = <&aggre2_noc MASTER_USB3 &mc_virt SLAVE_EBI1>,
-					<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3>;
+			interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
 			usb_1_dwc3: dwc3@a600000 {
@@ -2691,8 +2720,10 @@
 			reg = <0 0x0aa00000 0 0xff000>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&videocc VENUS_GDSC>,
-					<&videocc VCODEC0_GDSC>;
-			power-domain-names = "venus", "vcodec0";
+					<&videocc VCODEC0_GDSC>,
+					<&rpmhpd SC7180_CX>;
+			power-domain-names = "venus", "vcodec0", "cx";
+			operating-points-v2 = <&venus_opp_table>;
 			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
 				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
 				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
@@ -2702,8 +2733,8 @@
 				      "vcodec0_core", "vcodec0_bus";
 			iommus = <&apps_smmu 0x0c00 0x60>;
 			memory-region = <&venus_mem>;
-			interconnects = <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI1>,
-					<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_VENUS_CFG>;
+			interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
 			interconnect-names = "video-mem", "cpu-cfg";
 
 			video-decoder {
@@ -2713,6 +2744,35 @@
 			video-encoder {
 				compatible = "venus-encoder";
 			};
+
+			venus_opp_table: venus-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-150000000 {
+					opp-hz = /bits/ 64 <150000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-270000000 {
+					opp-hz = /bits/ 64 <270000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-340000000 {
+					opp-hz = /bits/ 64 <340000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-434000000 {
+					opp-hz = /bits/ 64 <434000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-500000097 {
+					opp-hz = /bits/ 64 <500000097>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
 		};
 
 		videocc: clock-controller@ab00000 {
@@ -2728,7 +2788,7 @@
 		camnoc_virt: interconnect@ac00000 {
 			compatible = "qcom,sc7180-camnoc-virt";
 			reg = <0 0x0ac00000 0 0x1000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
@@ -2740,10 +2800,9 @@
 			power-domains = <&dispcc MDSS_GDSC>;
 
 			clocks = <&gcc GCC_DISP_AHB_CLK>,
-				 <&gcc GCC_DISP_HF_AXI_CLK>,
 				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			clock-names = "iface", "bus", "ahb", "core";
+			clock-names = "iface", "ahb", "core";
 
 			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
 			assigned-clock-rates = <300000000>;
@@ -2752,6 +2811,9 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
+			interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+			interconnect-names = "mdp0-mem";
+
 			iommus = <&apps_smmu 0x800 0x2>;
 
 			#address-cells = <2>;
@@ -2766,12 +2828,13 @@
 				      <0 0x0aeb0000 0 0x2008>;
 				reg-names = "mdp", "vbif";
 
-				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
 					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
 					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
 					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
 					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				clock-names = "iface", "rot", "lut", "core",
+				clock-names = "bus", "iface", "rot", "lut", "core",
 					      "vsync";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
 						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
@@ -2785,7 +2848,7 @@
 				power-domains = <&rpmhpd SC7180_CX>;
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0>;
 
 				status = "disabled";
 
@@ -2833,7 +2896,7 @@
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <4>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -3312,6 +3375,29 @@
 			qcom,msa-fixed-perm;
 			status = "disabled";
 		};
+
+		lpasscc: clock-controller@62d00000 {
+			compatible = "qcom,sc7180-lpasscorecc";
+			reg = <0 0x62d00000 0 0x50000>,
+			      <0 0x62780000 0 0x30000>;
+			reg-names = "lpass_core_cc", "lpass_audio_cc";
+			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bi_tcxo";
+			power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		lpass_hm: clock-controller@63000000 {
+			compatible = "qcom,sc7180-lpasshm";
+			reg = <0 0x63000000 0 0x28>;
+			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bi_tcxo";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+		};
 	};
 
 	thermal-zones {
@@ -3320,6 +3406,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 1>;
+			sustainable-power = <768>;
 
 			trips {
 				cpu0_alert0: trip-point0 {
@@ -3368,6 +3455,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 2>;
+			sustainable-power = <768>;
 
 			trips {
 				cpu1_alert0: trip-point0 {
@@ -3416,6 +3504,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 3>;
+			sustainable-power = <768>;
 
 			trips {
 				cpu2_alert0: trip-point0 {
@@ -3464,6 +3553,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 4>;
+			sustainable-power = <768>;
 
 			trips {
 				cpu3_alert0: trip-point0 {
@@ -3512,6 +3602,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 5>;
+			sustainable-power = <768>;
 
 			trips {
 				cpu4_alert0: trip-point0 {
@@ -3560,6 +3651,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 6>;
+			sustainable-power = <768>;
 
 			trips {
 				cpu5_alert0: trip-point0 {
@@ -3608,6 +3700,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 9>;
+			sustainable-power = <1202>;
 
 			trips {
 				cpu6_alert0: trip-point0 {
@@ -3648,6 +3741,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 10>;
+			sustainable-power = <1202>;
 
 			trips {
 				cpu7_alert0: trip-point0 {
@@ -3688,6 +3782,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 11>;
+			sustainable-power = <1202>;
 
 			trips {
 				cpu8_alert0: trip-point0 {
@@ -3728,6 +3823,7 @@
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 12>;
+			sustainable-power = <1202>;
 
 			trips {
 				cpu9_alert0: trip-point0 {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a2a98680ccf5..7cc236575ee2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -451,16 +451,16 @@
 			port@0 {
 				reg = <0>;
 
-				lt9611_out: endpoint {
-					remote-endpoint = <&hdmi_con>;
+				lt9611_a: endpoint {
+					remote-endpoint = <&dsi0_out>;
 				};
 			};
 
-			port@1 {
-				reg = <1>;
+			port@2 {
+				reg = <2>;
 
-				lt9611_a: endpoint {
-					remote-endpoint = <&dsi0_out>;
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
 				};
 			};
 		};
@@ -1103,7 +1103,7 @@
 };
 
 &cci {
-	status = "ok";
+	status = "okay";
 };
 
 &cci_i2c0 {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
new file mode 100644
index 000000000000..86cbae63eaf7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/*
+ * Delete following upstream (sdm845.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &tz_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &mpss_region;
+/delete-node/ &venus_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mba_region;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+	model = "Xiaomi Pocophone F1";
+	compatible = "xiaomi,beryllium", "qcom,sdm845";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <69 0>;
+	qcom,msm-id = <321 0x20001>;
+
+	aliases {
+		hsuart0 = &uart6;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin_a>;
+
+		vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* Reserved memory changes from downstream */
+	reserved-memory {
+		tz_mem: memory@86200000 {
+			reg = <0 0x86200000 0 0x4900000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8c500000 {
+			reg = <0 0x8c500000 0 0x1e00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@8e300000 {
+			reg = <0 0x8e300000 0 0x100000>;
+			no-map;
+		};
+
+		mpss_region: memory@8e400000 {
+			reg = <0 0x8e400000 0 0x7800000>;
+			no-map;
+		};
+
+		venus_mem: memory@95c00000 {
+			reg = <0 0x95c00000 0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@96100000 {
+			reg = <0 0x96100000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: memory@96900000 {
+			reg = <0 0x96900000 0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@96b00000 {
+			reg = <0 0x96b00000 0 0x1400000>;
+			no-map;
+		};
+
+		spss_mem: memory@97f00000 {
+			reg = <0 0x97f00000 0 0x100000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f6301000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf6301000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+	};
+
+	vreg_s4a_1p8: vreg-s4a-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/adsp.mdt";
+};
+
+&apps_rsc {
+	pm8998-rpmh-regulators {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/cdsp.mdt";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gpu {
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
+	};
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt";
+};
+
+&pm8998_gpio {
+	vol_up_pin_a: vol-up-active {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
+&pm8998_pon {
+	resin {
+		compatible = "qcom,pm8941-resin";
+		interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+		debounce = <15625>;
+		bias-pull-up;
+		linux,code = <KEY_VOLUMEDOWN>;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sdc2_default_state: sdc2-default {
+		clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+	};
+
+	sdc2_card_det_n: sd-card-det-n {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&qup_uart6_default {
+	pinmux {
+		pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		function = "qup6";
+	};
+
+	cts {
+		pins = "gpio45";
+		bias-disable;
+	};
+
+	rts-tx {
+		pins = "gpio46", "gpio47";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rx {
+		pins = "gpio48";
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 2884577dcb77..d3737ffbf824 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -200,7 +200,7 @@
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
@@ -225,7 +225,7 @@
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_100>;
@@ -247,7 +247,7 @@
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_200>;
@@ -269,7 +269,7 @@
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_300>;
@@ -291,7 +291,7 @@
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_400>;
@@ -313,7 +313,7 @@
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_500>;
@@ -335,7 +335,7 @@
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_600>;
@@ -357,7 +357,7 @@
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_700>;
@@ -2011,49 +2011,49 @@
 		mem_noc: interconnect@1380000 {
 			compatible = "qcom,sdm845-mem-noc";
 			reg = <0 0x01380000 0 0x27200>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		dc_noc: interconnect@14e0000 {
 			compatible = "qcom,sdm845-dc-noc";
 			reg = <0 0x014e0000 0 0x400>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sdm845-config-noc";
 			reg = <0 0x01500000 0 0x5080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		system_noc: interconnect@1620000 {
 			compatible = "qcom,sdm845-system-noc";
 			reg = <0 0x01620000 0 0x18080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		aggre1_noc: interconnect@16e0000 {
 			compatible = "qcom,sdm845-aggre1-noc";
 			reg = <0 0x016e0000 0 0x15080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		aggre2_noc: interconnect@1700000 {
 			compatible = "qcom,sdm845-aggre2-noc";
 			reg = <0 0x01700000 0 0x1f300>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		mmss_noc: interconnect@1740000 {
 			compatible = "qcom,sdm845-mmss-noc";
 			reg = <0 0x01740000 0 0x1c100>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
@@ -2156,9 +2156,9 @@
 			clocks = <&rpmhcc RPMH_IPA_CLK>;
 			clock-names = "core";
 
-			interconnects = <&aggre2_noc MASTER_IPA &mem_noc SLAVE_EBI1>,
-				        <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>,
-					<&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>,
+					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
 			interconnect-names = "memory",
 					     "imem",
 					     "config";
@@ -3569,8 +3569,8 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			interconnects = <&aggre2_noc MASTER_USB3_0 &mem_noc SLAVE_EBI1>,
-					<&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_0>;
+			interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
 			usb_1_dwc3: dwc3@a600000 {
@@ -3617,8 +3617,8 @@
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
-			interconnects = <&aggre2_noc MASTER_USB3_1 &mem_noc SLAVE_EBI1>,
-					<&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_1>;
+			interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
 			usb_2_dwc3: dwc3@a800000 {
@@ -3639,8 +3639,10 @@
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&videocc VENUS_GDSC>,
 					<&videocc VCODEC0_GDSC>,
-					<&videocc VCODEC1_GDSC>;
-			power-domain-names = "venus", "vcodec0", "vcodec1";
+					<&videocc VCODEC1_GDSC>,
+					<&rpmhpd SDM845_CX>;
+			power-domain-names = "venus", "vcodec0", "vcodec1", "cx";
+			operating-points-v2 = <&venus_opp_table>;
 			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
 				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
 				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
@@ -3662,6 +3664,40 @@
 			video-core1 {
 				compatible = "venus-encoder";
 			};
+
+			venus_opp_table: venus-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-380000000 {
+					opp-hz = /bits/ 64 <380000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-533000097 {
+					opp-hz = /bits/ 64 <533000097>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
 		};
 
 		videocc: clock-controller@ab00000 {
@@ -3777,6 +3813,10 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mem_noc SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP1 0 &mem_noc SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
 			iommus = <&apps_smmu 0x880 0x8>,
 			         <&apps_smmu 0xc80 0x8>;
 
@@ -4007,7 +4047,7 @@
 
 			qcom,gmu = <&gmu>;
 
-			interconnects = <&mem_noc MASTER_GFX3D &mem_noc SLAVE_EBI1>;
+			interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>;
 			interconnect-names = "gfx-mem";
 
 			gpu_opp_table: opp-table {
@@ -4324,7 +4364,7 @@
 		gladiator_noc: interconnect@17900000 {
 			compatible = "qcom,sdm845-gladiator-noc";
 			reg = <0 0x17900000 0 0xd080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index b86a7ead3006..f0a872e02686 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -439,6 +441,55 @@
 			};
 		};
 
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm8150-config-noc";
+			reg = <0 0x01500000 0 0x7400>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sm8150-system-noc";
+			reg = <0 0x01620000 0 0x19400>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@163a000 {
+			compatible = "qcom,sm8150-mc-virt";
+			reg = <0 0x0163a000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8150-aggre1-noc";
+			reg = <0 0x016e0000 0 0xd080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8150-aggre2-noc";
+			reg = <0 0x01700000 0 0x20000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@1720000 {
+			compatible = "qcom,sm8150-compute-noc";
+			reg = <0 0x01720000 0 0x7000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm8150-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
@@ -507,6 +558,13 @@
 			};
 		};
 
+		ipa_virt: interconnect@1e00000 {
+			compatible = "qcom,sm8150-ipa-virt";
+			reg = <0 0x01e00000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -621,15 +679,15 @@
 				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hfi", "gmu";
 
-			clocks = <&gpucc 0>,
-				 <&gpucc 3>,
-				 <&gpucc 6>,
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
 				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
 				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
 			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
 
-			power-domains = <&gpucc 0>,
-					<&gpucc 1>;
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
 			power-domain-names = "cx", "gx";
 
 			iommus = <&adreno_smmu 5 0x400>;
@@ -674,12 +732,12 @@
 				<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gpucc 0>,
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
 				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
 				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
 			clock-names = "ahb", "bus", "iface";
 
-			power-domains = <&gpucc 0>;
+			power-domains = <&gpucc GPU_CX_GDSC>;
 		};
 
 		tlmm: pinctrl@3100000 {
@@ -767,7 +825,7 @@
 
 		usb_1_hsphy: phy@88e2000 {
 			compatible = "qcom,sm8150-usb-hs-phy",
-							"qcom,usb-snps-hs-7nm-phy";
+				     "qcom,usb-snps-hs-7nm-phy";
 			reg = <0 0x088e2000 0 0x400>;
 			status = "disabled";
 			#phy-cells = <0>;
@@ -813,6 +871,20 @@
 			};
 		};
 
+		dc_noc: interconnect@9160000 {
+			compatible = "qcom,sm8150-dc-noc";
+			reg = <0 0x09160000 0 0x3200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sm8150-gem-noc";
+			reg = <0 0x09680000 0 0x3e200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -833,7 +905,7 @@
 
 			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <150000000>;
+			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
@@ -857,6 +929,13 @@
 			};
 		};
 
+		camnoc_virt: interconnect@ac00000 {
+			compatible = "qcom,sm8150-camnoc-virt";
+			reg = <0 0x0ac00000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sm8150-aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x100000>;
@@ -1099,6 +1178,20 @@
 					};
 				};
 			};
+
+			apps_bcm_voter: bcm_voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		osm_l3: interconnect@18321000 {
+			compatible = "qcom,sm8150-osm-l3";
+			reg = <0 0x18321000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
 		};
 
 		cpufreq_hw: cpufreq@18323000 {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 6894f8490dae..fd194ed7fbc8 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -17,7 +17,7 @@
 	compatible = "qcom,sm8250-mtp";
 
 	aliases {
-		serial0 = &uart2;
+		serial0 = &uart12;
 	};
 
 	chosen {
@@ -358,10 +358,38 @@
 	firmware-name = "qcom/sm8250/cdsp.mbn";
 };
 
+&i2c1 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	/* NQ NFC chip @28 */
+};
+
+&i2c13 {
+	status = "okay";
+
+	/* st,stmfts @ 49 */
+};
+
+&i2c15 {
+	status = "okay";
+
+	/* smb1390 @ 10 */
+	/* rtc6226 @ 64 */
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
 
+&qupv3_id_2 {
+	status = "okay";
+};
+
 &slpi {
 	status = "okay";
 	firmware-name = "qcom/sm8250/slpi.mbn";
@@ -371,7 +399,7 @@
 	gpio-reserved-ranges = <28 4>, <40 4>;
 };
 
-&uart2 {
+&uart12 {
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 377172e8967b..d057d85a19fb 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -5,11 +5,14 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -72,7 +75,7 @@
 
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32000>;
+			clock-frequency = <32768>;
 			#clock-cells = <0>;
 		};
 	};
@@ -87,6 +90,8 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
 			L2_0: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -102,6 +107,8 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
 			L2_100: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -114,6 +121,8 @@
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
 			L2_200: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -126,6 +135,8 @@
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
 			L2_300: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -138,6 +149,8 @@
 			reg = <0x0 0x400>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
 			L2_400: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -150,6 +163,8 @@
 			reg = <0x0 0x500>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
 			L2_500: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -163,6 +178,8 @@
 			reg = <0x0 0x600>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
 			L2_600: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -175,6 +192,8 @@
 			reg = <0x0 0x700>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			#cooling-cells = <2>;
 			L2_700: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -393,8 +412,12 @@
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-			clock-names = "bi_tcxo", "sleep_clk";
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
 		};
 
 		ipcc: mailbox@408000 {
@@ -406,6 +429,25 @@
 			#mbox-cells = <2>;
 		};
 
+		qup_opp_table: qup-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-75000000 {
+				opp-hz = /bits/ 64 <75000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-120000000 {
+				opp-hz = /bits/ 64 <120000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+		};
+
 		qupv3_id_2: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -440,6 +482,8 @@
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -466,6 +510,8 @@
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -492,6 +538,8 @@
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -518,6 +566,21 @@
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			uart17: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -544,6 +607,21 @@
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			uart18: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -570,6 +648,8 @@
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 		};
@@ -608,6 +688,8 @@
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -634,6 +716,8 @@
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -660,6 +744,21 @@
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			uart2: serial@988000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -686,6 +785,8 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -712,6 +813,8 @@
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -738,6 +841,8 @@
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -764,6 +869,21 @@
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			uart6: serial@998000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -790,6 +910,8 @@
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 		};
@@ -828,6 +950,8 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -854,6 +978,8 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -880,6 +1006,8 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -906,6 +1034,8 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -932,15 +1062,21 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
-			uart2: serial@a90000 {
+			uart12: serial@a90000 {
 				compatible = "qcom,geni-debug-uart";
 				reg = <0x0 0x00a90000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart12_default>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -967,10 +1103,61 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SM8250_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 		};
 
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm8250-config-noc";
+			reg = <0 0x01500000 0 0xa580>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sm8250-system-noc";
+			reg = <0 0x01620000 0 0x1c200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@163d000 {
+			compatible = "qcom,sm8250-mc-virt";
+			reg = <0 0x0163d000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8250-aggre1-noc";
+			reg = <0 0x016e0000 0 0x1f180>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8250-aggre2-noc";
+			reg = <0 0x01700000 0 0x33000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@1733000 {
+			compatible = "qcom,sm8250-compute-noc";
+			reg = <0 0x01733000 0 0xa180>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm8250-mmss-noc";
+			reg = <0 0x01740000 0 0x1f080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
@@ -1041,6 +1228,13 @@
 			};
 		};
 
+		ipa_virt: interconnect@1e00000 {
+			compatible = "qcom,sm8250-ipa-virt";
+			reg = <0 0x01e00000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -1127,15 +1321,15 @@
 				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hfi", "gmu";
 
-			clocks = <&gpucc 0>,
-				 <&gpucc 3>,
-				 <&gpucc 6>,
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
 				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
 				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
 			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
 
-			power-domains = <&gpucc 0>,
-					<&gpucc 1>;
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
 			power-domain-names = "cx", "gx";
 
 			iommus = <&adreno_smmu 5 0x400>;
@@ -1181,12 +1375,12 @@
 				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gpucc 0>,
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
 				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
 				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
 			clock-names = "ahb", "bus", "iface";
 
-			power-domains = <&gpucc 0>;
+			power-domains = <&gpucc GPU_CX_GDSC>;
 		};
 
 		slpi: remoteproc@5c00000 {
@@ -1266,6 +1460,27 @@
 			};
 		};
 
+		dc_noc: interconnect@90c0000 {
+			compatible = "qcom,sm8250-dc-noc";
+			reg = <0 0x090c0000 0 0x4200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9100000 {
+			compatible = "qcom,sm8250-gem-noc";
+			reg = <0 0x09100000 0 0xb4000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		npu_noc: interconnect@9990000 {
+			compatible = "qcom,sm8250-npu-noc";
+			reg = <0 0x09990000 0 0x1600>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm8250-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -1276,6 +1491,28 @@
 			interrupt-controller;
 		};
 
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <9>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		aoss_qmp: qmp@c300000 {
 			compatible = "qcom,sm8250-aoss-qmp";
 			reg = <0 0x0c300000 0 0x100000>;
@@ -1880,6 +2117,43 @@
 					bias-disable;
 				};
 			};
+
+			qup_uart2_default: qup-uart2-default {
+				mux {
+					pins = "gpio117", "gpio118";
+					function = "qup2";
+				};
+			};
+
+			qup_uart6_default: qup-uart6-default {
+				mux {
+					pins = "gpio16", "gpio17",
+						"gpio18", "gpio19";
+					function = "qup6";
+				};
+			};
+
+			qup_uart12_default: qup-uart12-default {
+				mux {
+					pins = "gpio34", "gpio35";
+					function = "qup12";
+				};
+			};
+
+			qup_uart17_default: qup-uart17-default {
+				mux {
+					pins = "gpio52", "gpio53",
+						"gpio54", "gpio55";
+					function = "qup17";
+				};
+			};
+
+			qup_uart18_default: qup-uart18-default {
+				mux {
+					pins = "gpio58", "gpio59";
+					function = "qup18";
+				};
+			};
 		};
 
 		adsp: remoteproc@17300000 {
@@ -2066,6 +2340,34 @@
 					};
 				};
 			};
+
+			apps_bcm_voter: bcm_voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		epss_l3: interconnect@18591000 {
+			compatible = "qcom,sm8250-epss-l3";
+			reg = <0 0x18590000 0 0x1000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sm8250-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x18591000 0 0x1000>,
+			      <0 0x18592000 0 0x1000>,
+			      <0 0x18593000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1",
+				    "freq-domain2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
 		};
 	};
 
@@ -2080,4 +2382,739 @@
 			     <GIC_PPI 12
 				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu4_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu5_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu6_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu7_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster0_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster1_crit: cluster1_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal-top {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		compute-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				compute_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				npu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-thermal-bottom {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
 };