summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-09-10 20:54:48 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-09-10 20:54:48 -0700
commite90937e756938f03d37d4cae7c82316a3a425944 (patch)
tree0667f5ac6ad368278e9658ba483c79d1a60a65cd /arch/arm64/boot/dts
parentae46654bcff303b33facbbd04a3ad9c21d303f9b (diff)
parentb884026a2b80529fc7a4de729b92ee0ba555bfed (diff)
downloadlinux-e90937e756938f03d37d4cae7c82316a3a425944.tar.bz2
Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 Devicetree updates from Olof Johansson: "As usual, device tree updates is the bulk of our material in this merge window. This time around, 559 patches affecting both 32- and 64-bit platforms. Changes are too many to list individually, but some of the larger ones: New platform/SoC support: - Automotive: + Renesas R-Car D3 (R8A77995) + TI DT76x + MediaTek mt2712e - Communication-oriented: + Qualcomm IPQ8074 + Broadcom Stingray + Marvell Armada 8080 - Set top box: + Uniphier PXs3 Besides some vendor reference boards for the SoC above, there are also several new boards/machines: - TI AM335x Moxa UC-8100-ME-T open platform - TI AM57xx Beaglebone X15 Rev C - Microchip/Atmel sama5d27 SoM1 EK - Broadcom Raspberry Pi Zero W - Gemini-based D-Link DIR-685 router - Freescale i.MX6: + Toradex Apalis module + Apalis and Ixora carrier boards + Engicam GEAM6UL Starter Kit - Freescale i.MX53-based Beckhoff CX9020 Embedded PC - Mediatek mt7623-based BananaPi R2 - Several Allwinner-based single-board computers: + Cubietruck plus + Bananapi M3, M2M and M64 + NanoPi A64 + A64-OLinuXino + Pine64 - Rockchip RK3328 Pine64/Rock64 board support - Rockchip RK3399 boards: + RK3399 Sapphire module on Excavator carrier (RK3399 reference design) + Theobroma Systems RK3399-Q7 SoM - ZTE ZX296718 PCBOX Board" * tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits) ARM: dts: at91: at91sam9g45: add AC97 arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 arm64: dts: uniphier: add PXs3 SoC support ARM: dts: uniphier: add pinctrl groups of ethernet phy mode ARM: dts: uniphier: fix size of sdctrl nodes ARM: dts: uniphier: add AIDET nodes arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2" arm64: dts: uniphier: add reset controller node of analog amplifier arm64: dts: marvell: add Device Tree files for Armada-8KP arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM ARM: dts: rockchip: enable usb for rv1108-evb ARM: dts: rockchip: add usb nodes for rv1108 SoCs dt-bindings: update grf-binding for rv1108 SoCs ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers ...
Diffstat (limited to 'arch/arm64/boot/dts')
-rw-r--r--arch/arm64/boot/dts/allwinner/Makefile2
-rw-r--r--arch/arm64/boot/dts/allwinner/axp803.dtsi150
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts143
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts207
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts199
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts112
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts22
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi86
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi9
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi7
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gx.dtsi46
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts58
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts7
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi10
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts6
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi34
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts8
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts63
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts64
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts7
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts7
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl.dtsi35
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts7
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxm.dtsi4
-rw-r--r--arch/arm64/boot/dts/apm/apm-shadowcat.dtsi2
-rw-r--r--arch/arm64/boot/dts/apm/apm-storm.dtsi5
-rw-r--r--arch/arm64/boot/dts/arm/foundation-v8.dtsi2
-rw-r--r--arch/arm64/boot/dts/arm/juno-base.dtsi14
-rw-r--r--arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi2
-rw-r--r--arch/arm64/boot/dts/broadcom/Makefile4
l---------arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi1
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts42
-rw-r--r--arch/arm64/boot/dts/broadcom/bcm2837.dtsi86
l---------arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi1
l---------arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi1
l---------arch/arm64/boot/dts/broadcom/bcm283x.dtsi1
-rw-r--r--arch/arm64/boot/dts/broadcom/northstar2/Makefile6
-rw-r--r--arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi (renamed from arch/arm64/boot/dts/broadcom/ns2-clock.dtsi)0
-rw-r--r--arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts (renamed from arch/arm64/boot/dts/broadcom/ns2-svk.dts)0
-rw-r--r--arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts (renamed from arch/arm64/boot/dts/broadcom/ns2-xmc.dts)0
-rw-r--r--arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi (renamed from arch/arm64/boot/dts/broadcom/ns2.dtsi)0
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi78
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts4
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts4
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi118
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi278
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi136
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi19
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433.dtsi4
-rw-r--r--arch/arm64/boot/dts/exynos/exynos7-espresso.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi17
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi65
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts5
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts5
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts5
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi17
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts5
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts5
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi17
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi51
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts37
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3660.dtsi130
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi6220.dtsi9
-rw-r--r--arch/arm64/boot/dts/hisilicon/hip07-d05.dts4
-rw-r--r--arch/arm64/boot/dts/hisilicon/hip07.dtsi22
-rw-r--r--arch/arm64/boot/dts/marvell/Makefile1
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts30
-rw-r--r--arch/arm64/boot/dts/marvell/armada-37xx.dtsi11
-rw-r--r--arch/arm64/boot/dts/marvell/armada-7040-db.dts39
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-db.dts65
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts124
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8080-db.dts67
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8080.dtsi53
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi104
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi163
-rw-r--r--arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi83
-rw-r--r--arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi83
-rw-r--r--arch/arm64/boot/dts/mediatek/Makefile2
-rw-r--r--arch/arm64/boot/dts/mediatek/mt2712-evb.dts32
-rw-r--r--arch/arm64/boot/dts/mediatek/mt2712e.dtsi171
-rw-r--r--arch/arm64/boot/dts/mediatek/mt6797.dtsi12
-rw-r--r--arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts27
-rw-r--r--arch/arm64/boot/dts/mediatek/mt7622.dtsi110
-rw-r--r--arch/arm64/boot/dts/qcom/Makefile1
-rw-r--r--arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi1
-rw-r--r--arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi17
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi24
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi198
-rw-r--r--arch/arm64/boot/dts/qcom/ipq8074-hk01.dts52
-rw-r--r--arch/arm64/boot/dts/qcom/ipq8074.dtsi194
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916.dtsi120
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996.dtsi314
-rw-r--r--arch/arm64/boot/dts/qcom/pmi8994.dtsi17
-rw-r--r--arch/arm64/boot/dts/renesas/Makefile1
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts2
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts2
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi9
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts16
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts2
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts8
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795.dtsi314
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts14
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts31
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7796.dtsi414
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77995-draak.dts46
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77995.dtsi155
-rw-r--r--arch/arm64/boot/dts/renesas/salvator-common.dtsi4
-rw-r--r--arch/arm64/boot/dts/renesas/salvator-xs.dtsi10
-rw-r--r--arch/arm64/boot/dts/renesas/ulcb.dtsi51
-rw-r--r--arch/arm64/boot/dts/rockchip/Makefile3
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328-evb.dts164
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328-rock64.dts333
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328.dtsi398
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi1
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts1
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts3
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368-r88.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3368.dtsi140
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-evb.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-firefly.dts16
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts44
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi132
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi33
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi33
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts228
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi547
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts240
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi644
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399.dtsi284
-rw-r--r--arch/arm64/boot/dts/socionext/Makefile3
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts6
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts6
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi35
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts6
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts6
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi37
-rw-r--r--[l---------]arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi2
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts62
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi367
-rw-r--r--[l---------]arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi2
-rw-r--r--[l---------]arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi2
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi50
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts18
-rw-r--r--arch/arm64/boot/dts/xilinx/zynqmp.dtsi277
-rw-r--r--arch/arm64/boot/dts/zte/Makefile1
-rw-r--r--arch/arm64/boot/dts/zte/zx296718-evb.dts68
-rw-r--r--arch/arm64/boot/dts/zte/zx296718-pcbox.dts143
-rw-r--r--arch/arm64/boot/dts/zte/zx296718.dtsi171
150 files changed, 9777 insertions, 428 deletions
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 108f12ce6d1d..19c3fbd75eda 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -1,4 +1,6 @@
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
new file mode 100644
index 000000000000..ff8af52743ff
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -0,0 +1,150 @@
+/*
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP803 Integrated Power Management Chip
+ * http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf
+ */
+
+&axp803 {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ regulators {
+ /* Default work frequency for buck regulators */
+ x-powers,dcdc-freq = <3000>;
+
+ reg_aldo1: aldo1 {
+ regulator-name = "aldo1";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-name = "aldo2";
+ };
+
+ reg_aldo3: aldo3 {
+ regulator-name = "aldo3";
+ };
+
+ reg_dc1sw: dc1sw {
+ regulator-name = "dc1sw";
+ };
+
+ reg_dcdc1: dcdc1 {
+ regulator-name = "dcdc1";
+ };
+
+ reg_dcdc2: dcdc2 {
+ regulator-name = "dcdc2";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-name = "dcdc3";
+ };
+
+ reg_dcdc4: dcdc4 {
+ regulator-name = "dcdc4";
+ };
+
+ reg_dcdc5: dcdc5 {
+ regulator-name = "dcdc5";
+ };
+
+ reg_dcdc6: dcdc6 {
+ regulator-name = "dcdc6";
+ };
+
+ reg_dldo1: dldo1 {
+ regulator-name = "dldo1";
+ };
+
+ reg_dldo2: dldo2 {
+ regulator-name = "dldo2";
+ };
+
+ reg_dldo3: dldo3 {
+ regulator-name = "dldo3";
+ };
+
+ reg_dldo4: dldo4 {
+ regulator-name = "dldo4";
+ };
+
+ reg_eldo1: eldo1 {
+ regulator-name = "eldo1";
+ };
+
+ reg_eldo2: eldo2 {
+ regulator-name = "eldo2";
+ };
+
+ reg_eldo3: eldo3 {
+ regulator-name = "eldo3";
+ };
+
+ reg_fldo1: fldo1 {
+ regulator-name = "fldo1";
+ };
+
+ reg_fldo2: fldo2 {
+ regulator-name = "fldo2";
+ };
+
+ reg_ldo_io0: ldo-io0 {
+ regulator-name = "ldo-io0";
+ status = "disabled";
+ };
+
+ reg_ldo_io1: ldo-io1 {
+ regulator-name = "ldo-io1";
+ status = "disabled";
+ };
+
+ reg_rtc_ldo: rtc-ldo {
+ /* RTC_LDO is a fixed, always-on regulator */
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "rtc-ldo";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 6872135d7f84..d347f52e27f6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -59,14 +59,16 @@
stdout-path = "serial0:115200n8";
};
- reg_vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
};
+&ehci1 {
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@@ -80,7 +82,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <&reg_vcc3v3>;
+ vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
disable-wp;
@@ -91,22 +93,143 @@
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- vmmc-supply = <&reg_vcc3v3>;
+ vmmc-supply = <&reg_dldo2>;
+ vqmmc-supply = <&reg_dldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+ interrupt-names = "host-wake";
+ };
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
- vmmc-supply = <&reg_vcc3v3>;
+ vmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
+&ohci1 {
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp803: pmic@3a3 {
+ compatible = "x-powers,axp803";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1040000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-hdmi-dsi";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&reg_dldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
@@ -118,3 +241,7 @@
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
new file mode 100644
index 000000000000..2beef9e6cb88
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "FriendlyARM NanoPi A64";
+ compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+/* i2c1 connected with gpio headers like pine64, bananapi */
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "disabled";
+};
+
+&i2c1_pins {
+ bias-pull-up;
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp803: pmic@3a3 {
+ compatible = "x-powers,axp803";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1040000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-hdmi-dsi";
+};
+
+&reg_dldo4 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-pg-wifi-io";
+};
+
+&reg_eldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
new file mode 100644
index 000000000000..338e786155b1
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -0,0 +1,199 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Olimex A64-Olinuxino";
+ compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp803: pmic@3a3 {
+ compatible = "x-powers,axp803";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc-pe";
+};
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1040000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-ddr3";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc-avdd-csi";
+};
+
+&reg_dldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-dvdd-csi";
+};
+
+&reg_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 7c533b6d4ba9..caf8b6fbe5e3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -107,6 +107,118 @@
status = "okay";
};
+&r_rsb {
+ status = "okay";
+
+ axp803: pmic@3a3 {
+ compatible = "x-powers,axp803";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1040000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by Pine64 boards are DDR3L-compatible, so they can
+ * work at 1.35V with less power consumption.
+ * As AXP803 DCDC5 cannot reach 1.35V accurately, use 1.36V instead.
+ */
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1360000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&reg_eldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
/* On Exp and Euler connectors */
&uart0 {
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index d891a1a27f6c..17ccc12b58df 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -95,6 +95,28 @@
status = "okay";
};
+&reg_dc1sw {
+ regulator-name = "vcc-phy";
+};
+
+&reg_dldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index 475518b031dd..a5da18a6f286 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -63,3 +63,89 @@
bus-width = <4>;
status = "okay";
};
+
+&r_rsb {
+ status = "okay";
+
+ axp803: pmic@3a3 {
+ compatible = "x-powers,axp803";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1040000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vdd-1v8-lpddr";
+};
+
+&reg_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 68aadc9b96dc..8c8db1b057df 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -467,6 +467,15 @@
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
+ r_intc: interrupt-controller@1f00c00 {
+ compatible = "allwinner,sun50i-a64-r-intc",
+ "allwinner,sun6i-a31-r-intc";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x01f00c00 0x400>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
r_ccu: clock@1f01400 {
compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index dc478d094c11..c89010e56488 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -121,6 +121,13 @@
};
};
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 738ed689ff69..f175db846286 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -225,7 +225,7 @@
};
uart_A: serial@84c0 {
- compatible = "amlogic,meson-uart";
+ compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
reg = <0x0 0x84c0 0x0 0x14>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
@@ -233,7 +233,7 @@
};
uart_B: serial@84dc {
- compatible = "amlogic,meson-uart";
+ compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
reg = <0x0 0x84dc 0x0 0x14>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
@@ -279,7 +279,7 @@
};
uart_C: serial@8700 {
- compatible = "amlogic,meson-uart";
+ compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
reg = <0x0 0x8700 0x0 0x14>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
@@ -367,26 +367,40 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
- clkc_AO: clock-controller@040 {
- compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc";
- reg = <0x0 0x00040 0x0 0x4>;
- #clock-cells = <1>;
- #reset-cells = <1>;
+ sysctrl_AO: sys-ctrl@0 {
+ compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+ reg = <0x0 0x0 0x0 0x100>;
+
+ clkc_AO: clock-controller {
+ compatible = "amlogic,meson-gx-aoclkc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+ };
+
+ cec_AO: cec@100 {
+ compatible = "amlogic,meson-gx-ao-cec";
+ reg = <0x0 0x00100 0x0 0x14>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ sec_AO: ao-secure@140 {
+ compatible = "amlogic,meson-gx-ao-secure", "syscon";
+ reg = <0x0 0x140 0x0 0x140>;
+ amlogic,has-chip-id;
};
uart_AO: serial@4c0 {
- compatible = "amlogic,meson-uart";
+ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
reg = <0x0 0x004c0 0x0 0x14>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>;
status = "disabled";
};
uart_AO_B: serial@4e0 {
- compatible = "amlogic,meson-uart";
+ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
reg = <0x0 0x004e0 0x0 0x14>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>;
status = "disabled";
};
@@ -437,9 +451,9 @@
mailbox: mailbox@404 {
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
reg = <0 0x404 0 0x4c>;
- interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
- <0 209 IRQ_TYPE_EDGE_RISING>,
- <0 210 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
#mbox-cells = <1>;
};
};
@@ -448,7 +462,7 @@
compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
- interrupts = <0 8 1>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "macirq";
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index fa462831ccaf..9697a7a79464 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -175,6 +175,64 @@
pinctrl-names = "default";
};
+&pinctrl_aobus {
+ gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In",
+ "VCCK En", "CON1 Header Pin31",
+ "I2S Header Pin6", "IR In", "I2S Header Pin7",
+ "I2S Header Pin3", "I2S Header Pin4",
+ "I2S Header Pin5", "HDMI CEC", "SYS LED";
+};
+
+&pinctrl_periphs {
+ gpio-line-names = /* Bank GPIOZ */
+ "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
+ "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
+ "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
+ "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
+ "Eth PHY nRESET", "Eth PHY Intc",
+ /* Bank GPIOH */
+ "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL",
+ "CON1 Header Pin33",
+ /* Bank BOOT */
+ "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
+ "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
+ "eMMC Reset", "eMMC CMD",
+ "", "", "", "", "eMMC DS",
+ "", "",
+ /* Bank CARD */
+ "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+ "SDCard D3", "SDCard D2", "SDCard Det",
+ /* Bank GPIODV */
+ "", "", "", "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "", "",
+ "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+ "VDDEE Regulator", "VCCK Regulator",
+ /* Bank GPIOY */
+ "CON1 Header Pin7", "CON1 Header Pin11",
+ "CON1 Header Pin13", "CON1 Header Pin15",
+ "CON1 Header Pin18", "CON1 Header Pin19",
+ "CON1 Header Pin22", "CON1 Header Pin21",
+ "CON1 Header Pin24", "CON1 Header Pin23",
+ "CON1 Header Pin26", "CON1 Header Pin29",
+ "CON1 Header Pin32", "CON1 Header Pin8",
+ "CON1 Header Pin10", "CON1 Header Pin16",
+ "CON1 Header Pin12",
+ /* Bank GPIOX */
+ "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
+ "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
+ "WIFI Power Enable", "WIFI WAKE HOST",
+ "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
+ "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
+ "Bluetooth UART TX", "Bluetooth UART RX",
+ "Bluetooth UART CTS", "Bluetooth UART RTS",
+ "", "", "", "WIFI 32K", "Bluetooth Enable",
+ "Bluetooth WAKE HOST",
+ /* Bank GPIOCLK */
+ "", "CON1 Header Pin35", "", "",
+ /* GPIO_TEST_N */
+ "";
+};
+
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index a1078b3e1c76..9c59c3c6d1b6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -171,6 +171,13 @@
};
};
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
&ethmac {
status = "okay";
pinctrl-0 = <&eth_rmii_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index d904deb1018c..81ffc689a5bf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -84,6 +84,9 @@
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
states = <1800000 0
3300000 1>;
+
+ regulator-settling-time-up-us = <10000>;
+ regulator-settling-time-down-us = <150000>;
};
vddio_boot: regulator-vddio_boot {
@@ -148,6 +151,13 @@
};
};
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index e76ac313fef9..f7144fd5e03f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -108,6 +108,12 @@
};
};
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 17d3efdf1469..52f1687e7a09 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -307,6 +307,15 @@
};
};
+&cec_AO {
+ clocks = <&clkc_AO CLKID_AO_CEC_32K>;
+ clock-names = "core";
+};
+
+&clkc_AO {
+ compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
+};
+
&ethmac {
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
@@ -682,6 +691,31 @@
clocks = <&clkc CLKID_SPI>;
};
+&uart_A {
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO {
+ clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO_B {
+ clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+ clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+ clock-names = "xtal", "core", "baud";
+};
+
+&uart_C {
+ clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+ clock-names = "xtal", "core", "baud";
+};
+
&vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index 3e0c023d6abd..6827f235d7cf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -97,6 +97,13 @@
};
};
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
/* P230 has exclusive choice between internal or external PHY */
&ethmac {
pinctrl-0 = <&eth_pins>;
@@ -124,7 +131,6 @@
};
};
-
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 94567eb17875..edc512ad0bac 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -67,6 +67,13 @@
};
};
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
@@ -105,6 +112,62 @@
linux,rc-map-name = "rc-geekbox";
};
+&pinctrl_aobus {
+ gpio-line-names = "UART TX",
+ "UART RX",
+ "Power Key In",
+ "J9 Header Pin35",
+ "J9 Header Pin16",
+ "J9 Header Pin15",
+ "J9 Header Pin33",
+ "IR In",
+ "HDMI CEC",
+ "SYS LED";
+};
+
+&pinctrl_periphs {
+ gpio-line-names = /* Bank GPIOZ */
+ "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "",
+ "Power OFF",
+ "VCCK Enable",
+ /* Bank GPIOH */
+ "HDMI HPD", "HDMI SDA", "HDMI SCL",
+ "HDMI_5V_EN", "SPDIF",
+ "J9 Header Pin37",
+ "J9 Header Pin30",
+ "J9 Header Pin29",
+ "J9 Header Pin32",
+ "J9 Header Pin31",
+ /* Bank BOOT */
+ "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+ "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+ "eMMC Clk", "eMMC Reset", "eMMC CMD",
+ "", "BOOT_MODE", "", "", "eMMC Data Strobe",
+ /* Bank CARD */
+ "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+ "SDCard D3", "SDCard D2", "SDCard Det",
+ /* Bank GPIODV */
+ "", "", "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "", "", "",
+ "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+ "VCCK Regulator", "VDDEE Regulator",
+ /* Bank GPIOX */
+ "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
+ "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
+ "WIFI Power Enable", "WIFI WAKE HOST",
+ "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
+ "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
+ "Bluetooth UART TX", "Bluetooth UART RX",
+ "Bluetooth UART CTS", "Bluetooth UART RTS",
+ "WIFI 32K", "Bluetooth Enable",
+ "Bluetooth WAKE HOST",
+ /* Bank GPIOCLK */
+ "", "J9 Header Pin39",
+ /* GPIO_TEST_N */
+ "";
+};
+
&pwm_AO_ab {
status = "okay";
pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 266fbcf3e47f..69ca14ac10fa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -101,6 +101,13 @@
};
};
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
@@ -129,6 +136,63 @@
};
};
+&pinctrl_aobus {
+ gpio-line-names = "UART TX",
+ "UART RX",
+ "Blue LED",
+ "SDCard Voltage Switch",
+ "7J1 Header Pin5",
+ "7J1 Header Pin3",
+ "7J1 Header Pin12",
+ "IR In",
+ "9J3 Switch HDMI CEC/7J1 Header Pin11",
+ "7J1 Header Pin13";
+};
+
+&pinctrl_periphs {
+ gpio-line-names = /* Bank GPIOZ */
+ "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "",
+ "Eth Link LED", "Eth Activity LED",
+ /* Bank GPIOH */
+ "HDMI HPD", "HDMI SDA", "HDMI SCL",
+ "HDMI_5V_EN", "9J1 Header Pin2",
+ "Analog Audio Mute",
+ "2J3 Header Pin6",
+ "2J3 Header Pin5",
+ "2J3 Header Pin4",
+ "2J3 Header Pin3",
+ /* Bank BOOT */
+ "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+ "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+ "eMMC Clk", "eMMC Reset", "eMMC CMD",
+ "ALT BOOT MODE", "", "", "", "eMMC Data Strobe",
+ /* Bank CARD */
+ "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+ "SDCard D3", "SDCard D2", "SDCard Det",
+ /* Bank GPIODV */
+ "", "", "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "", "", "",
+ "Green LED", "VCCK Enable",
+ "7J1 Header Pin27", "7J1 Header Pin28",
+ "VCCK Regulator", "VDDEE Regulator",
+ /* Bank GPIOX */
+ "7J1 Header Pin22", "7J1 Header Pin26",
+ "7J1 Header Pin36", "7J1 Header Pin38",
+ "7J1 Header Pin40", "7J1 Header Pin37",
+ "7J1 Header Pin33", "7J1 Header Pin35",
+ "7J1 Header Pin19", "7J1 Header Pin21",
+ "7J1 Header Pin24", "7J1 Header Pin23",
+ "7J1 Header Pin8", "7J1 Header Pin10",
+ "7J1 Header Pin16", "7J1 Header Pin18",
+ "7J1 Header Pin32", "7J1 Header Pin29",
+ "7J1 Header Pin31",
+ /* Bank GPIOCLK */
+ "7J1 Header Pin7", "",
+ /* GPIO_TEST_N */
+ "7J1 Header Pin15";
+};
+
/* SD card */
&sd_emmc_b {
status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index 6633a5d8fdd3..4c2ac7650fcd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -140,6 +140,13 @@
};
};
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index 6ab17c1eeefd..6e2bf858291c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -71,6 +71,13 @@
};
};
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 8d4f3160a0ee..d6876e64979e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -43,6 +43,7 @@
#include "meson-gx.dtsi"
#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
#include <dt-bindings/gpio/meson-gxl-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
@@ -207,6 +208,15 @@
};
};
+&cec_AO {
+ clocks = <&clkc_AO CLKID_AO_CEC_32K>;
+ clock-names = "core";
+};
+
+&clkc_AO {
+ compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
+};
+
&hdmi_tx {
compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
resets = <&reset RESET_HDMITX_CAPB3>,
@@ -623,6 +633,31 @@
clocks = <&clkc CLKID_SPI>;
};
+&uart_A {
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+ clock-names = "xtal", "core", "baud";
+};
+
+&uart_AO {
+ clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO_B {
+ clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+ clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+ clock-names = "xtal", "core", "baud";
+};
+
+&uart_C {
+ clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+ clock-names = "xtal", "core", "baud";
+};
+
&vpu {
compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 5f626d683088..9b10c5f4f8c0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -113,6 +113,13 @@
};
};
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index fe451cce93e7..19a798d2ae2f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -117,6 +117,10 @@
};
};
+&clkc_AO {
+ compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
+};
+
&saradc {
compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
};
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index 72720e9132a1..c9ffffb96e43 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -626,6 +626,7 @@
0x43000000 0xe0 0x00000000 0xe0 0x00000000 0x20 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x4
@@ -651,6 +652,7 @@
0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x4
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 63be8e51eaa8..c09a36fed917 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -626,6 +626,7 @@
0x43000000 0xf0 0x00000000 0xf0 0x00000000 0x10 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x4
@@ -651,6 +652,7 @@
0x43000000 0xd8 0x00000000 0xd8 0x00000000 0x08 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x4
@@ -676,6 +678,7 @@
0x43000000 0x94 0x00000000 0x94 0x00000000 0x04 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x4
@@ -701,6 +704,7 @@
0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x4
@@ -726,6 +730,7 @@
0x43000000 0xc8 0x00000000 0xc8 0x00000000 0x08 0x00000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x4
0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x4
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index 7cfa8e414e7f..8ecdd4331980 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -226,7 +226,7 @@
clock-names = "uartclk", "apb_pclk";
};
- virtio_block@0130000 {
+ virtio-block@0130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x200>;
interrupts = <42>;
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index e8b7413ec890..fbafe62d6b22 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -201,7 +201,7 @@
};
};
- cpu_debug0: cpu_debug@22010000 {
+ cpu_debug0: cpu-debug@22010000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x22010000 0x0 0x1000>;
@@ -260,7 +260,7 @@
};
};
- cpu_debug1: cpu_debug@22110000 {
+ cpu_debug1: cpu-debug@22110000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x22110000 0x0 0x1000>;
@@ -283,7 +283,7 @@
};
};
- cpu_debug2: cpu_debug@23010000 {
+ cpu_debug2: cpu-debug@23010000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x23010000 0x0 0x1000>;
@@ -356,7 +356,7 @@
};
};
- cpu_debug3: cpu_debug@23110000 {
+ cpu_debug3: cpu-debug@23110000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x23110000 0x0 0x1000>;
@@ -379,7 +379,7 @@
};
};
- cpu_debug4: cpu_debug@23210000 {
+ cpu_debug4: cpu-debug@23210000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x23210000 0x0 0x1000>;
@@ -402,7 +402,7 @@
};
};
- cpu_debug5: cpu_debug@23310000 {
+ cpu_debug5: cpu-debug@23310000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x23310000 0x0 0x1000>;
@@ -426,7 +426,7 @@
};
replicator@20120000 {
- compatible = "qcom,coresight-replicator1x", "arm,primecell";
+ compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0 0x20120000 0 0x1000>;
clocks = <&soc_smc50mhz>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index 161ac98418a3..528875c75598 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -219,7 +219,7 @@
};
};
- virtio_block@0130000 {
+ virtio-block@0130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x200>;
interrupts = <42>;
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index f11bdd6689ea..3eaef3895d66 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,7 +1,7 @@
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
-dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb
-dts-dirs := stingray
+dts-dirs += northstar2
+dts-dirs += stingray
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
deleted file mode 120000
index 3937b77cb310..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/bcm2835-rpi.dtsi \ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index 972f14db28ac..699d340a3437 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -1,41 +1 @@
-/dts-v1/;
-#include "bcm2837.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-smsc9514.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
- compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
- model = "Raspberry Pi 3 Model B";
-
- memory {
- reg = <0 0x40000000>;
- };
-
- leds {
- act {
- gpios = <&gpio 47 0>;
- };
- };
-};
-
-&uart1 {
- status = "okay";
-};
-
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_gpio34>;
- status = "okay";
- bus-width = <4>;
- non-removable;
-};
-
-/* SDHOST is used to drive the SD card */
-&sdhost {
- pinctrl-names = "default";
- pinctrl-0 = <&sdhost_gpio48>;
- status = "okay";
- bus-width = <4>;
-};
+#include "arm/bcm2837-rpi-3-b.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
deleted file mode 100644
index 2d5de6f0f78d..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
+++ /dev/null
@@ -1,86 +0,0 @@
-#include "bcm283x.dtsi"
-
-/ {
- compatible = "brcm,bcm2837";
-
- soc {
- ranges = <0x7e000000 0x3f000000 0x1000000>,
- <0x40000000 0x40000000 0x00001000>;
- dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
-
- local_intc: local_intc {
- compatible = "brcm,bcm2836-l1-intc";
- reg = <0x40000000 0x100>;
- interrupt-controller;
- #interrupt-cells = <1>;
- interrupt-parent = <&local_intc>;
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupt-parent = <&local_intc>;
- interrupts = <0>, // PHYS_SECURE_PPI
- <1>, // PHYS_NONSECURE_PPI
- <3>, // VIRT_PPI
- <2>; // HYP_PPI
- always-on;
- };
-
- cpus: cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000d8>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <1>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000e0>;
- };
-
- cpu2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <2>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000e8>;
- };
-
- cpu3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <3>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x000000f0>;
- };
- };
-};
-
-/* Make the BCM2835-style global interrupt controller be a child of the
- * CPU-local interrupt controller.
- */
-&intc {
- compatible = "brcm,bcm2836-armctrl-ic";
- reg = <0x7e00b200 0x200>;
- interrupt-parent = <&local_intc>;
- interrupts = <8>;
-};
-
-&cpu_thermal {
- coefficients = <(-538) 412000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
- compatible = "brcm,bcm2837-thermal";
- status = "okay";
-};
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
deleted file mode 120000
index dca7c057d5a5..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi \ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
deleted file mode 120000
index cbeebe312ff8..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/bcm283x-rpi-usb-host.dtsi \ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x.dtsi
deleted file mode 120000
index 5f54e4cab99b..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm283x.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/bcm283x.dtsi \ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/Makefile b/arch/arm64/boot/dts/broadcom/northstar2/Makefile
new file mode 100644
index 000000000000..e01a1485b813
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/northstar2/Makefile
@@ -0,0 +1,6 @@
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-xmc.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi
index 99009fdf10a4..99009fdf10a4 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index ec19fbf928a1..ec19fbf928a1 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
diff --git a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
index ab4ae1a32fab..ab4ae1a32fab 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 35c8457e3d1f..35c8457e3d1f 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index 5dca7d10253b..8862ec907fd8 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -72,6 +72,78 @@
<0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
};
+&sata0 {
+ status = "okay";
+};
+
+&sata_phy0{
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&sata_phy1{
+ status = "okay";
+};
+
+&sata2 {
+ status = "okay";
+};
+
+&sata_phy2{
+ status = "okay";
+};
+
+&sata3 {
+ status = "okay";
+};
+
+&sata_phy3{
+ status = "okay";
+};
+
+&sata4 {
+ status = "okay";
+};
+
+&sata_phy4{
+ status = "okay";
+};
+
+&sata5 {
+ status = "okay";
+};
+
+&sata_phy5{
+ status = "okay";
+};
+
+&sata6 {
+ status = "okay";
+};
+
+&sata_phy6{
+ status = "okay";
+};
+
+&sata7 {
+ status = "okay";
+};
+
+&sata_phy7{
+ status = "okay";
+};
+
+&mdio_mux_iproc {
+ mdio@10 {
+ gphy0: eth-phy@10 {
+ reg = <0x10>;
+ };
+ };
+};
+
&uart1 {
status = "okay";
};
@@ -102,6 +174,12 @@
};
};
+&enet {
+ phy-mode = "rgmii-id";
+ phy-handle = <&gphy0>;
+ status = "okay";
+};
+
&nand {
status = "ok";
nandcs@0 {
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
index 5671669ba348..eb6f08cdbd79 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
@@ -39,6 +39,10 @@
model = "Stingray Combo SVK (BCM958742K)";
};
+&gphy0 {
+ enet-phy-lane-swap;
+};
+
&uart2 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
index 6ebe399fda6a..5084b037320f 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
@@ -38,3 +38,7 @@
compatible = "brcm,bcm958742t", "brcm,stingray";
model = "Stingray SST100 (BCM958742T)";
};
+
+&gphy0 {
+ enet-phy-lane-swap;
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
new file mode 100644
index 000000000000..8bf1dc6b46ca
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
@@ -0,0 +1,118 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ fs4: fs4 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x67000000 0x00800000>;
+
+ crypto_mbox: crypto_mbox@00000000 {
+ compatible = "brcm,iproc-flexrm-mbox";
+ reg = <0x00000000 0x200000>;
+ msi-parent = <&gic_its 0x4100>;
+ #mbox-cells = <3>;
+ dma-coherent;
+ };
+
+ raid_mbox: raid_mbox@00400000 {
+ compatible = "brcm,iproc-flexrm-mbox";
+ reg = <0x00400000 0x200000>;
+ dma-coherent;
+ msi-parent = <&gic_its 0x4300>;
+ #mbox-cells = <3>;
+ };
+
+ raid0: raid@0 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 0 0x1 0xff00>,
+ <&raid_mbox 1 0x1 0xff00>,
+ <&raid_mbox 2 0x1 0xff00>,
+ <&raid_mbox 3 0x1 0xff00>;
+ };
+
+ raid1: raid@1 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 4 0x1 0xff00>,
+ <&raid_mbox 5 0x1 0xff00>,
+ <&raid_mbox 6 0x1 0xff00>,
+ <&raid_mbox 7 0x1 0xff00>;
+ };
+
+ raid2: raid@2 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 8 0x1 0xff00>,
+ <&raid_mbox 9 0x1 0xff00>,
+ <&raid_mbox 10 0x1 0xff00>,
+ <&raid_mbox 11 0x1 0xff00>;
+ };
+
+ raid3: raid@3 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 12 0x1 0xff00>,
+ <&raid_mbox 13 0x1 0xff00>,
+ <&raid_mbox 14 0x1 0xff00>,
+ <&raid_mbox 15 0x1 0xff00>;
+ };
+
+ raid4: raid@4 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 16 0x1 0xff00>,
+ <&raid_mbox 17 0x1 0xff00>,
+ <&raid_mbox 18 0x1 0xff00>,
+ <&raid_mbox 19 0x1 0xff00>;
+ };
+
+ raid5: raid@5 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 20 0x1 0xff00>,
+ <&raid_mbox 21 0x1 0xff00>,
+ <&raid_mbox 22 0x1 0xff00>,
+ <&raid_mbox 23 0x1 0xff00>;
+ };
+
+ raid6: raid@6 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 24 0x1 0xff00>,
+ <&raid_mbox 25 0x1 0xff00>,
+ <&raid_mbox 26 0x1 0xff00>,
+ <&raid_mbox 27 0x1 0xff00>;
+ };
+
+ raid7: raid@7 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 28 0x1 0xff00>,
+ <&raid_mbox 29 0x1 0xff00>,
+ <&raid_mbox 30 0x1 0xff00>,
+ <&raid_mbox 31 0x1 0xff00>;
+ };
+ };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
new file mode 100644
index 000000000000..a774709388df
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
@@ -0,0 +1,278 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016-2017 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ sata {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x67d00000 0x00800000>;
+
+ sata0: ahci@00210000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00210000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata0_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy0: sata_phy@00212100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00212100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata1: ahci@00310000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00310000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata1_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata1_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy1: sata_phy@00312100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00312100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata1_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata2: ahci@00120000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00120000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata2_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata2_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy2: sata_phy@00122100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00122100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata2_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata3: ahci@00130000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00130000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata3_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata3_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy3: sata_phy@00132100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00132100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata3_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata4: ahci@00330000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00330000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata4_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata4_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy4: sata_phy@00332100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00332100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata4_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata5: ahci@00400000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00400000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata5_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata5_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy5: sata_phy@00402100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00402100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata5_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata6: ahci@00410000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00410000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata6_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata6_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy6: sata_phy@00412100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00412100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata6_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sata7: ahci@00420000 {
+ compatible = "brcm,iproc-ahci", "generic-ahci";
+ reg = <0x00420000 0x1000>;
+ reg-names = "ahci";
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata7_port0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata7_phy0>;
+ phy-names = "sata-phy";
+ };
+ };
+
+ sata_phy7: sata_phy@00422100 {
+ compatible = "brcm,iproc-sr-sata-phy";
+ reg = <0x00422100 0x1000>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata7_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ };
+ };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 49933cf16c92..e6f75c633623 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -152,6 +152,12 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x61000000 0x05000000>;
+ ccn: ccn@00000000 {
+ compatible = "arm,ccn-502";
+ reg = <0x00000000 0x900000>;
+ interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
gic: interrupt-controller@02c00000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
@@ -261,6 +267,9 @@
};
};
+ #include "stingray-fs4.dtsi"
+ #include "stingray-sata.dtsi"
+
hsls {
compatible = "simple-bus";
#address-cells = <1>;
@@ -269,6 +278,37 @@
#include "stingray-pinctrl.dtsi"
+ mdio_mux_iproc: mdio-mux@0002023c {
+ compatible = "brcm,mdio-mux-iproc";
+ reg = <0x0002023c 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 { /* PCIe serdes */
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@2 { /* SATA */
+ reg = <0x2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@3 { /* USB */
+ reg = <0x3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@10 { /* RGMII */
+ reg = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
pwm: pwm@00010000 {
compatible = "brcm,iproc-pwm";
reg = <0x00010000 0x1000>;
@@ -277,6 +317,93 @@
status = "disabled";
};
+ timer0: timer@00030000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x00030000 0x1000>;
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_25m_div2_clk>,
+ <&hsls_25m_div2_clk>,
+ <&hsls_div4_clk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ status = "disabled";
+ };
+
+ timer1: timer@00040000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x00040000 0x1000>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_25m_div2_clk>,
+ <&hsls_25m_div2_clk>,
+ <&hsls_div4_clk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ timer2: timer@00050000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x00050000 0x1000>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_25m_div2_clk>,
+ <&hsls_25m_div2_clk>,
+ <&hsls_div4_clk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ status = "disabled";
+ };
+
+ timer3: timer@00060000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x00060000 0x1000>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_25m_div2_clk>,
+ <&hsls_25m_div2_clk>,
+ <&hsls_div4_clk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ status = "disabled";
+ };
+
+ timer4: timer@00070000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x00070000 0x1000>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_25m_div2_clk>,
+ <&hsls_25m_div2_clk>,
+ <&hsls_div4_clk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ status = "disabled";
+ };
+
+ timer5: timer@00080000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x00080000 0x1000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_25m_div2_clk>,
+ <&hsls_25m_div2_clk>,
+ <&hsls_div4_clk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ status = "disabled";
+ };
+
+ timer6: timer@00090000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x00090000 0x1000>;
+ interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_25m_div2_clk>,
+ <&hsls_25m_div2_clk>,
+ <&hsls_div4_clk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ status = "disabled";
+ };
+
+ timer7: timer@000a0000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x000a0000 0x1000>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_25m_div2_clk>,
+ <&hsls_25m_div2_clk>,
+ <&hsls_div4_clk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ status = "disabled";
+ };
+
i2c0: i2c@000b0000 {
compatible = "brcm,iproc-i2c";
reg = <0x000b0000 0x100>;
@@ -424,6 +551,15 @@
iommus = <&smmu 0x6000 0x0000>;
};
+ enet: ethernet@00340000{
+ compatible = "brcm,amac";
+ reg = <0x00340000 0x1000>;
+ reg-names = "amac_base";
+ dma-coherent;
+ interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+ status= "disabled";
+ };
+
nand: nand@00360000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x00360000 0x600>,
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 105b2938082f..297597442c44 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -307,20 +307,6 @@
samsung,pll-clock-frequency = <24000000>;
pinctrl-names = "default";
pinctrl-0 = <&te_irq>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- dsi_out: endpoint {
- samsung,burst-clock-frequency = <512000000>;
- samsung,esc-clock-frequency = <16000000>;
- };
- };
- };
};
&hdmi {
@@ -843,7 +829,6 @@
&mshc_0 {
status = "okay";
- num-slots = <1>;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
cap-mmc-highspeed;
@@ -865,7 +850,6 @@
&mshc_2 {
status = "okay";
- num-slots = <1>;
cap-sd-highspeed;
disable-wp;
cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
@@ -1210,8 +1194,9 @@
status = "okay";
};
-&usbdrd_dwc3_0 {
+&usbdrd_dwc3 {
dr_mode = "otg";
+ extcon = <&muic>;
};
&usbdrd30_phy {
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 727f36abf3d4..7fe994b750da 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1367,7 +1367,7 @@
ranges;
status = "disabled";
- dwc3@15400000 {
+ usbdrd_dwc3: dwc3@15400000 {
compatible = "snps,dwc3";
reg = <0x15400000 0x10000>;
interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
@@ -1414,7 +1414,7 @@
ranges;
status = "disabled";
- usbdrd_dwc3_0: dwc3@15a00000 {
+ usbhost_dwc3: dwc3@15a00000 {
compatible = "snps,dwc3";
reg = <0x15a00000 0x10000>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index e5892bb0ae6e..4a8b1fb51243 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -359,7 +359,6 @@
&mmc_0 {
status = "okay";
- num-slots = <1>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
non-removable;
@@ -375,7 +374,6 @@
&mmc_2 {
status = "okay";
- num-slots = <1>;
cap-sd-highspeed;
card-detect-delay = <200>;
clock-frequency = <400000000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index b1554cbd2c54..df83915d6ea6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -444,6 +444,15 @@
<&clockgen 4 3>;
};
+ usb0: usb3@2f00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <0 60 0x4>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
sata: sata@3200000 {
compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
@@ -454,5 +463,13 @@
dma-coherent;
status = "disabled";
};
+
+ usb1: usb2@8600000 {
+ compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+ reg = <0x0 0x8600000 0x0 0x1000>;
+ interrupts = <0 139 0x4>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 213abb72de93..0f6fcda36b9e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -49,7 +49,7 @@
#include "fsl-ls1088a.dtsi"
/ {
- model = "L1088A RDB Board";
+ model = "LS1088A RDB Board";
compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index c144d06a6e33..33797b373674 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -52,6 +52,10 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ crypto = &crypto;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -62,6 +66,7 @@
compatible = "arm,cortex-a53";
reg = <0x0>;
clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -70,6 +75,7 @@
compatible = "arm,cortex-a53";
reg = <0x1>;
clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu2: cpu@2 {
@@ -77,6 +83,7 @@
compatible = "arm,cortex-a53";
reg = <0x2>;
clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu3: cpu@3 {
@@ -84,6 +91,7 @@
compatible = "arm,cortex-a53";
reg = <0x3>;
clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu4: cpu@100 {
@@ -91,6 +99,7 @@
compatible = "arm,cortex-a53";
reg = <0x100>;
clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -99,6 +108,7 @@
compatible = "arm,cortex-a53";
reg = <0x101>;
clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu6: cpu@102 {
@@ -106,6 +116,7 @@
compatible = "arm,cortex-a53";
reg = <0x102>;
clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu7: cpu@103 {
@@ -113,6 +124,16 @@
compatible = "arm,cortex-a53";
reg = <0x103>;
clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+
+ CPU_PH20: cpu-ph20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PH20";
+ arm,psci-suspend-param = <0x00010000>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
};
};
@@ -136,6 +157,11 @@
<1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
};
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -369,6 +395,45 @@
dma-coherent;
status = "disabled";
};
+
+ crypto: crypto@8000000 {
+ compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+ fsl,sec-era = <8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x8000000 0x100000>;
+ reg = <0x00 0x8000000 0x0 0x100000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+
+ sec_jr0: jr@10000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@20000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@30000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr3: jr@40000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index ed209cd57283..3c99608b9b45 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -55,11 +55,6 @@
model = "Freescale Layerscape 2080a QDS Board";
compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index 67ec3f9c81a1..a4e7de9f70d8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -55,11 +55,6 @@
model = "Freescale Layerscape 2080a RDB Board";
compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- };
-
chosen {
stdout-path = "serial1:115200n8";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
index 3ee718f0aaf8..fbbb73e571c0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -52,11 +52,6 @@
model = "Freescale Layerscape 2080a software Simulator model";
compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- };
-
ethernet@2210000 {
compatible = "smsc,lan91c111";
reg = <0x0 0x2210000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index d789c6814e6a..8d739301e7b8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -53,6 +53,7 @@
compatible = "arm,cortex-a57";
reg = <0x0>;
clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
};
@@ -62,6 +63,7 @@
compatible = "arm,cortex-a57";
reg = <0x1>;
clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
};
@@ -70,6 +72,7 @@
compatible = "arm,cortex-a57";
reg = <0x100>;
clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
};
@@ -79,6 +82,7 @@
compatible = "arm,cortex-a57";
reg = <0x101>;
clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
};
@@ -87,6 +91,7 @@
compatible = "arm,cortex-a57";
reg = <0x200>;
clocks = <&clockgen 1 2>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>;
#cooling-cells = <2>;
};
@@ -96,6 +101,7 @@
compatible = "arm,cortex-a57";
reg = <0x201>;
clocks = <&clockgen 1 2>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>;
};
@@ -105,6 +111,7 @@
reg = <0x300>;
clocks = <&clockgen 1 3>;
next-level-cache = <&cluster3_l2>;
+ cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
};
@@ -113,6 +120,7 @@
compatible = "arm,cortex-a57";
reg = <0x301>;
clocks = <&clockgen 1 3>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>;
};
@@ -131,6 +139,15 @@
cluster3_l2: l2-cache3 {
compatible = "cache";
};
+
+ CPU_PW20: cpu-pw20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PW20";
+ arm,psci-suspend-param = <0x00010000>;
+ entry-latency-us = <2000>;
+ exit-latency-us = <2000>;
+ min-residency-us = <6000>;
+ };
};
&pcie1 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
index 4a1df5ce3229..eaee5b1c3a44 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -54,11 +54,6 @@
model = "Freescale Layerscape 2088A QDS Board";
compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- };
-
chosen {
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
index a76d4b4debd1..c411442cac62 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -54,11 +54,6 @@
model = "Freescale Layerscape 2088A RDB Board";
compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- };
-
chosen {
stdout-path = "serial1:115200n8";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index 5c695c658056..6aa319dae396 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -53,6 +53,7 @@
compatible = "arm,cortex-a72";
reg = <0x0>;
clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
};
@@ -62,6 +63,7 @@
compatible = "arm,cortex-a72";
reg = <0x1>;
clocks = <&clockgen 1 0>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
};
@@ -70,6 +72,7 @@
compatible = "arm,cortex-a72";
reg = <0x100>;
clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
};
@@ -79,6 +82,7 @@
compatible = "arm,cortex-a72";
reg = <0x101>;
clocks = <&clockgen 1 1>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
};
@@ -88,6 +92,7 @@
reg = <0x200>;
clocks = <&clockgen 1 2>;
next-level-cache = <&cluster2_l2>;
+ cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
};
@@ -96,6 +101,7 @@
compatible = "arm,cortex-a72";
reg = <0x201>;
clocks = <&clockgen 1 2>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>;
};
@@ -104,6 +110,7 @@
compatible = "arm,cortex-a72";
reg = <0x300>;
clocks = <&clockgen 1 3>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>;
#cooling-cells = <2>;
};
@@ -113,6 +120,7 @@
compatible = "arm,cortex-a72";
reg = <0x301>;
clocks = <&clockgen 1 3>;
+ cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>;
};
@@ -131,6 +139,15 @@
cluster3_l2: l2-cache3 {
compatible = "cache";
};
+
+ CPU_PW20: cpu-pw20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PW20";
+ arm,psci-suspend-param = <0x00010000>;
+ entry-latency-us = <2000>;
+ exit-latency-us = <2000>;
+ min-residency-us = <6000>;
+ };
};
&pcie1 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 94cdd3045037..4fb9a0966a84 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "fsl,ls2080a";
@@ -53,6 +54,12 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ crypto = &crypto;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+
cpu: cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -118,6 +125,11 @@
interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
};
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -301,6 +313,45 @@
clock-names = "apb_pclk", "wdog_clk";
};
+ crypto: crypto@8000000 {
+ compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+ fsl,sec-era = <8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x8000000 0x100000>;
+ reg = <0x00 0x8000000 0x0 0x100000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+
+ sec_jr0: jr@10000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@20000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@30000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr3: jr@40000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
fsl_mc: fsl-mc@80c000000 {
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 6609b0fe7a8b..fd4705c451e2 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -39,6 +39,34 @@
reg = <0x0 0x0 0x0 0x0>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ramoops@32000000 {
+ compatible = "ramoops";
+ reg = <0x0 0x32000000 0x0 0x00100000>;
+ record-size = <0x00020000>;
+ console-size = <0x00020000>;
+ ftrace-size = <0x00020000>;
+ };
+ };
+
+ reboot-mode-syscon@32100000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x32100000 0x0 0x00001000>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x0>;
+
+ mode-normal = <0x77665501>;
+ mode-bootloader = <0x77665500>;
+ mode-recovery = <0x77665502>;
+ };
+ };
+
keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -159,6 +187,13 @@
startup-delay-us = <70000>;
enable-active-high;
};
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
};
&i2c0 {
@@ -195,7 +230,7 @@
bluetooth {
compatible = "ti,wl1837-st";
enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
- max-speed = <921600>;
+ max-speed = <3000000>;
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index c6a1961e8d55..b7a90d632959 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -58,6 +58,8 @@
device_type = "cpu";
reg = <0x0 0x0>;
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
};
cpu1: cpu@1 {
@@ -65,6 +67,8 @@
device_type = "cpu";
reg = <0x0 0x1>;
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
};
cpu2: cpu@2 {
@@ -72,6 +76,8 @@
device_type = "cpu";
reg = <0x0 0x2>;
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
};
cpu3: cpu@3 {
@@ -79,6 +85,8 @@
device_type = "cpu";
reg = <0x0 0x3>;
enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
};
cpu4: cpu@100 {
@@ -86,6 +94,12 @@
device_type = "cpu";
reg = <0x0 0x100>;
enable-method = "psci";
+ next-level-cache = <&A73_L2>;
+ cpu-idle-states = <
+ &CPU_NAP
+ &CPU_SLEEP
+ &CLUSTER_SLEEP_1
+ >;
};
cpu5: cpu@101 {
@@ -93,6 +107,12 @@
device_type = "cpu";
reg = <0x0 0x101>;
enable-method = "psci";
+ next-level-cache = <&A73_L2>;
+ cpu-idle-states = <
+ &CPU_NAP
+ &CPU_SLEEP
+ &CLUSTER_SLEEP_1
+ >;
};
cpu6: cpu@102 {
@@ -100,6 +120,12 @@
device_type = "cpu";
reg = <0x0 0x102>;
enable-method = "psci";
+ next-level-cache = <&A73_L2>;
+ cpu-idle-states = <
+ &CPU_NAP
+ &CPU_SLEEP
+ &CLUSTER_SLEEP_1
+ >;
};
cpu7: cpu@103 {
@@ -107,6 +133,59 @@
device_type = "cpu";
reg = <0x0 0x103>;
enable-method = "psci";
+ next-level-cache = <&A73_L2>;
+ cpu-idle-states = <
+ &CPU_NAP
+ &CPU_SLEEP
+ &CLUSTER_SLEEP_1
+ >;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_NAP: cpu-nap {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0000001>;
+ entry-latency-us = <7>;
+ exit-latency-us = <2>;
+ min-residency-us = <15>;
+ };
+
+ CPU_SLEEP: cpu-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <40>;
+ exit-latency-us = <70>;
+ min-residency-us = <3000>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <500>;
+ exit-latency-us = <5000>;
+ min-residency-us = <20000>;
+ };
+
+ CLUSTER_SLEEP_1: cluster-sleep-1 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <5000>;
+ min-residency-us = <20000>;
+ };
+ };
+
+ A53_L2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ A73_L2: l2-cache1 {
+ compatible = "cache";
};
};
@@ -123,6 +202,26 @@
IRQ_TYPE_LEVEL_HIGH)>;
};
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>,
+ <&cpu4>,
+ <&cpu5>,
+ <&cpu6>,
+ <&cpu7>;
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
@@ -337,6 +436,19 @@
status = "disabled";
};
+ dma0: dma@fdf30000 {
+ compatible = "hisilicon,k3-dma-1.0";
+ reg = <0x0 0xfdf30000 0x0 0x1000>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ dma-requests = <32>;
+ dma-min-chan = <1>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>;
+ dma-no-cci;
+ dma-type = "hi3660_dma";
+ };
+
rtc0: rtc@fff04000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x0 0Xfff04000 0x0 0x1000>;
@@ -810,6 +922,7 @@
clock-names = "ciu", "biu";
clock-frequency = <3200000>;
resets = <&crg_rst 0x94 18>;
+ reset-names = "reset";
cd-gpios = <&gpio25 3 0>;
hisilicon,peripheral-syscon = <&sctrl>;
pinctrl-names = "default";
@@ -839,6 +952,7 @@
<&crg_ctrl HI3660_HCLK_GATE_SDIO0>;
clock-names = "ciu", "biu";
resets = <&crg_rst 0x94 20>;
+ reset-names = "reset";
card-detect-delay = <200>;
supports-highspeed;
keep-power-in-suspend;
@@ -848,5 +962,21 @@
&sdio_cfg_func>;
status = "disabled";
};
+
+ watchdog0: watchdog@e8a06000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xe8a06000 0x0 0x1000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_OSC32K>;
+ clock-names = "apb_pclk";
+ };
+
+ watchdog1: watchdog@e8a07000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xe8a07000 0x0 0x1000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_OSC32K>;
+ clock-names = "apb_pclk";
+ };
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index eacbe0db5bc2..02a3aa4b2165 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -262,6 +262,12 @@
#clock-cells = <1>;
};
+ acpu_sctrl: acpu_sctrl@f6504000 {
+ compatible = "hisilicon,hi6220-acpu-sctrl", "syscon";
+ reg = <0x0 0xf6504000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
medianoc_ade: medianoc_ade@f4520000 {
compatible = "syscon";
reg = <0x0 0xf4520000 0x0 0x4000>;
@@ -755,7 +761,8 @@
dr_mode = "otg";
g-rx-fifo-size = <512>;
g-np-tx-fifo-size = <128>;
- g-tx-fifo-size = <128 128 128 128 128 128>;
+ g-tx-fifo-size = <128 128 128 128 128 128 128 128
+ 16 16 16 16 16 16 16>;
interrupts = <0 77 0x4>;
};
diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
index f5d7f0889b41..fe7c16c36025 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
@@ -84,3 +84,7 @@
&sas1 {
status = "ok";
};
+
+&p0_pcie2_a {
+ status = "ok";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
index 283d7b532e16..2c01a21c3665 100644
--- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
@@ -1534,5 +1534,27 @@
<637 1>,<638 1>,<639 1>;
status = "disabled";
};
+
+ p0_pcie2_a: pcie@a00a0000 {
+ compatible = "hisilicon,hip07-pcie-ecam";
+ reg = <0 0xaf800000 0 0x800000>,
+ <0 0xa00a0000 0 0x10000>;
+ bus-range = <0xf8 0xff>;
+ msi-map = <0xf800 &p0_its_dsa_a 0xf800 0x800>;
+ msi-map-mask = <0xffff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000
+ 0x01000000 0 0 0 0xaf7f0000 0 0x10000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0x0 0 0 1 &mbigen_pcie2_a 671 4
+ 0x0 0 0 2 &mbigen_pcie2_a 671 4
+ 0x0 0 0 3 &mbigen_pcie2_a 671 4
+ 0x0 0 0 4 &mbigen_pcie2_a 671 4>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 3e6ce6c15a74..6cff81eeaae2 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index e3a136ed77b0..2ce52ba74f73 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -45,6 +45,7 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "armada-372x.dtsi"
/ {
@@ -59,6 +60,20 @@
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
+
+ vcc_sd_reg1: regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "vcc_sd1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ enable-active-high;
+ };
};
/* J9 */
@@ -71,6 +86,16 @@
status = "okay";
};
+/* J1 */
+&sdhci1 {
+ wp-inverted;
+ bus-width = <4>;
+ cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
+ marvell,pad-type = "sd";
+ vqmmc-supply = <&vcc_sd_reg1>;
+ status = "okay";
+};
+
/* Exported on the micro USB connector J5 through an FTDI */
&uart0 {
status = "okay";
@@ -81,6 +106,11 @@
status = "okay";
};
+/* J8 */
+&usb2 {
+ status = "okay";
+};
+
&mdio {
switch0: switch0@1 {
compatible = "marvell,mv88e6085";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 51763d674050..8c0cf7efac65 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -81,6 +81,11 @@
<GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
};
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -322,7 +327,11 @@
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x1d00000 0x10000>, /* GICD */
- <0x1d40000 0x40000>; /* GICR */
+ <0x1d40000 0x40000>, /* GICR */
+ <0x1d80000 0x2000>, /* GICC */
+ <0x1d90000 0x2000>, /* GICH */
+ <0x1da0000 0x20000>; /* GICV */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 92c761c380d3..9c3bdf87e543 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -44,6 +44,7 @@
* Device Tree file for Marvell Armada 7040 Development board platform
*/
+#include <dt-bindings/gpio/gpio.h>
#include "armada-7040.dtsi"
/ {
@@ -59,6 +60,34 @@
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
+
+ cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3h0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3h1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ cpm_usb3_0_phy: cpm-usb3-0-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cpm_reg_usb3_0_vbus>;
+ };
+
+ cpm_usb3_1_phy: cpm-usb3-1-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cpm_reg_usb3_1_vbus>;
+ };
};
&i2c0 {
@@ -105,6 +134,14 @@
&cpm_i2c0 {
status = "okay";
clock-frequency = <100000>;
+
+ expander0: pca9555@21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x21>;
+ };
};
&cpm_spi1 {
@@ -140,10 +177,12 @@
};
&cpm_usb3_0 {
+ usb-phy = <&cpm_usb3_0_phy>;
status = "okay";
};
&cpm_usb3_1 {
+ usb-phy = <&cpm_usb3_1_phy>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 1e8f7242ed6f..0d7b2ae46610 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -44,6 +44,7 @@
* Device Tree file for Marvell Armada 8040 Development board platform
*/
+#include <dt-bindings/gpio/gpio.h>
#include "armada-8040.dtsi"
/ {
@@ -59,6 +60,48 @@
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
+
+ cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "cpm-usb3h0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "cpm-usb3h1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ cpm_usb3_0_phy: cpm-usb3-0-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cpm_reg_usb3_0_vbus>;
+ };
+
+ cpm_usb3_1_phy: cpm-usb3-1-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cpm_reg_usb3_1_vbus>;
+ };
+
+ cps_reg_usb3_0_vbus: cps-usb3-0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "cps-usb3h0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ cps_usb3_0_phy: cps-usb3-0-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&cps_reg_usb3_0_vbus>;
+ };
};
&i2c0 {
@@ -107,6 +150,25 @@
&cpm_i2c0 {
status = "okay";
clock-frequency = <100000>;
+
+ /* U31 */
+ expander0: pca9555@21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x21>;
+ };
+
+ /* U25 */
+ expander1: pca9555@25 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x25>;
+ };
+
};
/* CON4 on CP0 expansion */
@@ -116,11 +178,13 @@
/* CON9 on CP0 expansion */
&cpm_usb3_0 {
+ usb-phy = <&cpm_usb3_0_phy>;
status = "okay";
};
/* CON10 on CP0 expansion */
&cpm_usb3_1 {
+ usb-phy = <&cpm_usb3_1_phy>;
status = "okay";
};
@@ -159,6 +223,7 @@
/* CON9 on CP1 expansion */
&cps_usb3_0 {
+ usb-phy = <&cps_usb3_0_phy>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 4968e731de61..acf5c7d16d79 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -46,11 +46,17 @@
#include "armada-8040.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
/ {
model = "Marvell 8040 MACHIATOBin";
compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
"marvell,armada-ap806-quad", "marvell,armada-ap806";
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
memory@00000000 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
@@ -77,11 +83,13 @@
v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&cpm_gpio2 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_xhci_vbus_pins>;
regulator-name = "v_5v0_usb3_hst_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- /* actually GPIO controlled, but 8k has no GPIO support yet */
- regulator-always-on;
status = "okay";
};
@@ -112,10 +120,44 @@
&cpm_i2c0 {
clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c0_pins>;
status = "okay";
};
+&cpm_i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c1_pins>;
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ sfpp0_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ sfpp1_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ sfp_1g_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ };
+};
+
&cpm_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_ge_mdio_pins>;
status = "okay";
ge_phy: ethernet-phy@0 {
@@ -123,6 +165,67 @@
};
};
+&cpm_pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_pcie_pins>;
+ num-lanes = <4>;
+ num-viewport = <8>;
+ reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&cpm_pinctrl {
+ cpm_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp32", "mpp34";
+ marvell,function = "ge";
+ };
+ cpm_i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cpm_i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cpm_xhci_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ cpm_pcie_pins: pcie-pins {
+ marvell,pins = "mpp52";
+ marvell,function = "gpio";
+ };
+ cpm_sdhci_pins: sdhci-pins {
+ marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+ "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+};
+
+&cpm_xmdio {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+
+ phy8: ethernet-phy@8 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <8>;
+ };
+};
+
+&cpm_ethernet {
+ status = "okay";
+};
+
+&cpm_eth0 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "10gbase-kr";
+};
+
&cpm_sata0 {
/* CPM Lane 0 - U29 */
status = "okay";
@@ -132,6 +235,8 @@
/* U6 */
broken-cd;
bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_sdhci_pins>;
status = "okay";
vqmmc-supply = <&v_3_3>;
};
@@ -150,6 +255,12 @@
status = "okay";
};
+&cps_eth0 {
+ status = "okay";
+ phy = <&phy8>;
+ phy-mode = "10gbase-kr";
+};
+
&cps_eth1 {
/* CPS Lane 0 - J5 (Gigabit RJ45) */
status = "okay";
@@ -157,6 +268,13 @@
phy-mode = "sgmii";
};
+&cps_pinctrl {
+ cps_spi1_pins: spi1-pins {
+ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+};
+
&cps_sata0 {
/* CPS Lane 1 - U32 */
/* CPS Lane 3 - U31 */
@@ -164,6 +282,8 @@
};
&cps_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cps_spi1_pins>;
status = "okay";
spi-flash@0 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8080-db.dts b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
new file mode 100644
index 000000000000..707af833832b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada-8080 Development board platform
+ */
+
+#include "armada-8080.dtsi"
+
+/ {
+ model = "Marvell 8080 board";
+ compatible = "marvell,armada-8080-db", "marvell,armada-8080",
+ "marvell,armada-ap810-octa", "marvell,armada-ap810";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+&uart0_ap0 {
+ clock-frequency = <384000>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8080.dtsi b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
new file mode 100644
index 000000000000..d5535b716735
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada-8080 SoC, made of an AP810 OCTA.
+ */
+
+#include "armada-ap810-ap0-octa-core.dtsi"
+
+/ {
+ model = "Marvell 8080 board";
+ compatible = "marvell,armada-8080", "marvell,armada-ap810-octa",
+ "marvell,armada-ap810";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
new file mode 100644
index 000000000000..bf1b22b70384
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP810 OCTA cores.
+ */
+
+#include "armada-ap810-ap0.dtsi"
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,armada-ap810-octa";
+
+ cpu@000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x000>;
+ enable-method = "psci";
+ };
+ cpu@001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x001>;
+ enable-method = "psci";
+ };
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x100>;
+ enable-method = "psci";
+ };
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x101>;
+ enable-method = "psci";
+ };
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x200>;
+ enable-method = "psci";
+ };
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x201>;
+ enable-method = "psci";
+ };
+ cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x300>;
+ enable-method = "psci";
+ };
+ cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x301>;
+ enable-method = "psci";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
new file mode 100644
index 000000000000..7e6f039f0f80
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP810.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+/ {
+ model = "Marvell Armada AP810";
+ compatible = "marvell,armada-ap810";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0_ap0;
+ serial1 = &uart1_ap0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ ap810-ap0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ config-space@e8000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 0xe8000000 0x4000000>;
+ interrupt-parent = <&gic>;
+
+ gic: interrupt-controller@3000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+
+ reg = <0x3000000 0x10000>, /* GICD */
+ <0x3060000 0x100000>, /* GICR */
+ <0x00c0000 0x2000>, /* GICC */
+ <0x00d0000 0x1000>, /* GICH */
+ <0x00e0000 0x2000>; /* GICV */
+
+ gic_its_ap0: interrupt-controller@3040000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ #msi-cells = <1>;
+ reg = <0x3040000 0x20000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ xor@400000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x400000 0x1000>,
+ <0x410000 0x1000>;
+ msi-parent = <&gic_its_ap0 0xa0>;
+ dma-coherent;
+ };
+
+ xor@420000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x420000 0x1000>,
+ <0x430000 0x1000>;
+ msi-parent = <&gic_its_ap0 0xa1>;
+ dma-coherent;
+ };
+
+ xor@440000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x440000 0x1000>,
+ <0x450000 0x1000>;
+ msi-parent = <&gic_its_ap0 0xa2>;
+ dma-coherent;
+ };
+
+ xor@460000 {
+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+ reg = <0x460000 0x1000>,
+ <0x470000 0x1000>;
+ msi-parent = <&gic_its_ap0 0xa3>;
+ dma-coherent;
+ };
+
+ uart0_ap0: serial@512000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x512000 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ status = "disabled";
+ };
+
+ uart1_ap0: serial@512100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x512100 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 4c68605675a8..8263a8a504a8 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -65,25 +65,44 @@
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>;
clock-names = "pp_clk", "gop_clk", "mg_clk";
+ marvell,system-controller = <&cpm_syscon0>;
status = "disabled";
dma-coherent;
cpm_eth0: eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+ "tx-cpu3", "rx-shared";
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
};
cpm_eth1: eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+ "tx-cpu3", "rx-shared";
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
};
cpm_eth2: eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+ "tx-cpu3", "rx-shared";
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
@@ -115,6 +134,13 @@
msi-parent = <&gicp>;
};
+ cpm_rtc: rtc@284000 {
+ compatible = "marvell,armada-8k-rtc";
+ reg = <0x284000 0x20>, <0x284080 0x24>;
+ reg-names = "rtc", "rtc-soc";
+ interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
cpm_syscon0: system-controller@440000 {
compatible = "syscon", "simple-mfd";
reg = <0x440000 0x1000>;
@@ -131,8 +157,12 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cpm_pinctrl 0 0 32>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
-
};
cpm_gpio2: gpio@140 {
@@ -142,26 +172,15 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cpm_pinctrl 0 32 31>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
- cpm_rtc: rtc@284000 {
- compatible = "marvell,armada-8k-rtc";
- reg = <0x284000 0x20>, <0x284080 0x24>;
- reg-names = "rtc", "rtc-soc";
- interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- cpm_sata0: sata@540000 {
- compatible = "marvell,armada-8k-ahci",
- "generic-ahci";
- reg = <0x540000 0x30000>;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_clk 1 15>;
- status = "disabled";
- };
-
cpm_usb3_0: usb3@500000 {
compatible = "marvell,armada-8k-xhci",
"generic-xhci";
@@ -182,6 +201,15 @@
status = "disabled";
};
+ cpm_sata0: sata@540000 {
+ compatible = "marvell,armada-8k-ahci",
+ "generic-ahci";
+ reg = <0x540000 0x30000>;
+ interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 15>;
+ status = "disabled";
+ };
+
cpm_xor0: xor@6a0000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x6a0000 0x1000>,
@@ -240,6 +268,21 @@
status = "disabled";
};
+ cpm_nand: nand@720000 {
+ /*
+ * Due to the limiation of the pin available
+ * this controller is only usable on the CPM
+ * for A7K and on the CPS for A8K.
+ */
+ compatible = "marvell,armada370-nand";
+ reg = <0x720000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 2>;
+ status = "disabled";
+ };
+
cpm_trng: trng@760000 {
compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 923f354b02f0..b71ee6c83668 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -60,37 +60,49 @@
compatible = "simple-bus";
ranges = <0x0 0x0 0xf4000000 0x2000000>;
- cps_rtc: rtc@284000 {
- compatible = "marvell,armada-8k-rtc";
- reg = <0x284000 0x20>, <0x284080 0x24>;
- reg-names = "rtc", "rtc-soc";
- interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
- };
-
cps_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>;
clock-names = "pp_clk", "gop_clk", "mg_clk";
+ marvell,system-controller = <&cps_syscon0>;
status = "disabled";
dma-coherent;
cps_eth0: eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+ "tx-cpu3", "rx-shared";
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
};
cps_eth1: eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+ "tx-cpu3", "rx-shared";
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
};
cps_eth2: eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
+ "tx-cpu3", "rx-shared";
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
@@ -122,6 +134,13 @@
msi-parent = <&gicp>;
};
+ cps_rtc: rtc@284000 {
+ compatible = "marvell,armada-8k-rtc";
+ reg = <0x284000 0x20>, <0x284080 0x24>;
+ reg-names = "rtc", "rtc-soc";
+ interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
cps_syscon0: system-controller@440000 {
compatible = "syscon", "simple-mfd";
reg = <0x440000 0x1000>;
@@ -138,8 +157,12 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cps_pinctrl 0 0 32>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
-
};
cps_gpio2: gpio@140 {
@@ -149,20 +172,16 @@
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cps_pinctrl 0 32 31>;
+ interrupt-controller;
+ interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
- cps_sata0: sata@540000 {
- compatible = "marvell,armada-8k-ahci",
- "generic-ahci";
- reg = <0x540000 0x30000>;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_clk 1 15>;
- status = "disabled";
- };
-
cps_usb3_0: usb3@500000 {
compatible = "marvell,armada-8k-xhci",
"generic-xhci";
@@ -183,6 +202,15 @@
status = "disabled";
};
+ cps_sata0: sata@540000 {
+ compatible = "marvell,armada-8k-ahci",
+ "generic-ahci";
+ reg = <0x540000 0x30000>;
+ interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 15>;
+ status = "disabled";
+ };
+
cps_xor0: xor@6a0000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x6a0000 0x1000>,
@@ -241,6 +269,21 @@
status = "disabled";
};
+ cps_nand: nand@720000 {
+ /*
+ * Due to the limiation of the pin available
+ * this controller is only usable on the CPM
+ * for A7K and on the CPS for A8K.
+ */
+ compatible = "marvell,armada370-nand";
+ reg = <0x720000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 2>;
+ status = "disabled";
+ };
+
cps_trng: trng@760000 {
compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>;
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 015eb072ddef..151723b5c733 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -1,6 +1,8 @@
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
new file mode 100644
index 000000000000..8c804df3da4e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: YT Shen <yt.shen@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include "mt2712e.dtsi"
+
+/ {
+ model = "MediaTek MT2712 evaluation board";
+ compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
new file mode 100644
index 000000000000..57d0396b7faa
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -0,0 +1,171 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: YT Shen <yt.shen@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "mediatek,mt2712";
+ interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu2>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0x000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0x001>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x200>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ baud_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
+ sys_clk: dummyclk {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ uart5: serial@1000f000 {
+ compatible = "mediatek,mt2712-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x1000f000 0 0x400>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&baud_clk>, <&sys_clk>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ sysirq: interrupt-controller@10220a80 {
+ compatible = "mediatek,mt2712-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10220a80 0 0x40>;
+ };
+
+ gic: interrupt-controller@10510000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x10510000 0 0x10000>,
+ <0 0x10520000 0 0x20000>,
+ <0 0x10540000 0 0x20000>,
+ <0 0x10560000 0 0x20000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt2712-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&baud_clk>, <&sys_clk>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt2712-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&baud_clk>, <&sys_clk>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt2712-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&baud_clk>, <&sys_clk>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt2712-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&baud_clk>, <&sys_clk>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart4: serial@11019000 {
+ compatible = "mediatek,mt2712-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11019000 0 0x400>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&baud_clk>, <&sys_clk>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 31088a9f71de..4beaa71107d7 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -108,13 +108,6 @@
clock-output-names = "clk26m";
};
- clk32k: oscillator@1 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32000>;
- clock-output-names = "clk32k";
- };
-
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
@@ -147,6 +140,11 @@
infracfg = <&infrasys>;
};
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt6797-wdt", "mediatek,mt6589-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ };
+
apmixedsys: apmixed@1000c000 {
compatible = "mediatek,mt6797-apmixedsys";
reg = <0 0x1000c000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
new file mode 100644
index 000000000000..c08309df2cc7
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Ming Huang <ming.huang@mediatek.com>
+ * Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include "mt7622.dtsi"
+
+/ {
+ model = "MediaTek MT7622 RFB1 board";
+ compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n1";
+ };
+
+ memory {
+ reg = <0 0x40000000 0 0x3F000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
new file mode 100644
index 000000000000..b111fec2ed9d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Ming Huang <ming.huang@mediatek.com>
+ * Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "mediatek,mt7622";
+ interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ clock-frequency = <1300000000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ clock-frequency = <1300000000>;
+ };
+ };
+
+ uart_clk: dummy25m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ bus_clk: dummy280m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <280000000>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved: secmon@43000000 {
+ reg = <0 0x43000000 0 0x30000>;
+ no-map;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ sysirq: interrupt-controller@10200620 {
+ compatible = "mediatek,mt7622-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200620 0 0x20>;
+ };
+
+ gic: interrupt-controller@10300000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10310000 0 0x1000>,
+ <0 0x10320000 0 0x1000>,
+ <0 0x10340000 0 0x2000>,
+ <0 0x10360000 0 0x2000>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt7622-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>, <&bus_clk>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index cc0f02d9dd02..ff81d7e5805e 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,6 @@
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
index d94640812194..790b7775b901 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -17,6 +17,7 @@
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <PM8916_GPIO_VPH>;
input-disable;
+ output-high;
};
};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index bd310ac1967a..1d63e6b879de 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -88,6 +88,8 @@
interrupts = <31 2>;
adi,dsi-lanes = <4>;
+ clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+ clock-names = "cec";
pd-gpios = <&msmgpio 32 0>;
@@ -213,11 +215,14 @@
};
usb@78d9000 {
- extcon = <&usb_id>, <&usb_id>;
+ extcon = <&usb_id>;
status = "okay";
adp-disable;
hnp-disable;
srp-disable;
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_sw_sel_pm>;
ulpi {
phy {
v1p8-supply = <&pm8916_l7>;
@@ -337,19 +342,11 @@
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
- id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
+ vbus-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_id_default>;
};
- usb-switch {
- compatible = "toshiba,tc7usb40mu";
- switch-gpios = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
- extcon = <&usb_id>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb_sw_sel_pm>;
- };
-
hdmi-out {
compatible = "hdmi-connector";
type = "a";
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
index b1142c45fdc9..8e379782597a 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
@@ -24,4 +24,28 @@
power-source = <PM8994_GPIO_S4>; // 1.8V
};
};
+
+ usb3_vbus_det_gpio: pm8996_gpio22 {
+ pinconf {
+ pins = "gpio22";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-enable;
+ bias-pull-down;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ };
+ };
+};
+
+&pmi8994_gpios {
+ usb2_vbus_det_gpio: pmi8996_gpio6 {
+ pinconf {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-enable;
+ bias-pull-down;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8994_GPIO_S4>; // 1.8V
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index d2196fc6d739..789f3e87321e 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -13,6 +13,7 @@
#include "msm8996.dtsi"
#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
#include "apq8096-db820c-pins.dtsi"
#include "apq8096-db820c-pmic-pins.dtsi"
#include <dt-bindings/input/input.h>
@@ -88,6 +89,55 @@
cd-gpios = <&msmgpio 38 0x1>;
status = "okay";
};
+
+ phy@34000 {
+ status = "okay";
+ };
+
+ phy@7410000 {
+ status = "okay";
+ };
+
+ phy@7411000 {
+ status = "okay";
+ };
+
+ phy@7412000 {
+ status = "okay";
+ };
+
+ usb@6a00000 {
+ status = "okay";
+
+ dwc3@6a00000 {
+ extcon = <&usb3_id>;
+ dr_mode = "otg";
+ };
+ };
+
+ usb3_id: usb3-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_vbus_det_gpio>;
+ };
+
+ usb@7600000 {
+ status = "okay";
+
+ dwc3@7600000 {
+ extcon = <&usb2_id>;
+ dr_mode = "otg";
+ maximum-speed = "high-speed";
+ };
+ };
+
+ usb2_id: usb2-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_vbus_det_gpio>;
+ };
};
@@ -106,4 +156,152 @@
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
};
};
+
+ rpm-glink {
+ rpm_requests {
+ pm8994-regulators {
+ vdd_l1-supply = <&pm8994_s3>;
+ vdd_l2_l26_l28-supply = <&pm8994_s3>;
+ vdd_l3_l11-supply = <&pm8994_s3>;
+ vdd_l4_l27_l31-supply = <&pm8994_s3>;
+ vdd_l5_l7-supply = <&pm8994_s5>;
+ vdd_l14_l15-supply = <&pm8994_s5>;
+ vdd_l20_l21-supply = <&pm8994_s5>;
+ vdd_l25-supply = <&pm8994_s3>;
+
+ s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+ s7 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ l2 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ };
+ l3 {
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ };
+ l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ l6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ l11 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+ l17 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ l18 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2900000>;
+ };
+ l19 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+ l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ l22 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+ l25 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-allow-set-load;
+ };
+ l27 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ l28 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-allow-set-load;
+ };
+ l29 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ l30 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ l32 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
new file mode 100644
index 000000000000..6a838b5d321e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -0,0 +1,52 @@
+/dts-v1/;
+/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include "ipq8074.dtsi"
+
+/ {
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
+ compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
+ interrupt-parent = <&intc>;
+
+ aliases {
+ serial0 = &blsp1_uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x0 0x20000000>;
+ };
+
+ soc {
+ pinctrl@1000000 {
+ serial_4_pins: serial4_pinmux {
+ mux {
+ pins = "gpio23", "gpio24";
+ function = "blsp4_uart1";
+ bias-disable;
+ };
+ };
+ };
+
+ serial@78b3000 {
+ pinctrl-0 = <&serial_4_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
new file mode 100644
index 000000000000..2bc5dec5614d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -0,0 +1,194 @@
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8074";
+ compatible = "qcom,ipq8074";
+
+ soc: soc {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ pinctrl@1000000 {
+ compatible = "qcom,ipq8074-pinctrl";
+ reg = <0x1000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <0x3>;
+ reg = <0xb000000 0x1000>, <0xb002000 0x1000>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ timer@b120000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0xb120000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@b120000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb121000 0x1000>,
+ <0xb122000 0x1000>;
+ };
+
+ frame@b123000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb123000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b124000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb124000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b125000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb125000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b126000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb126000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b127000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb127000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b128000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xb128000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ gcc: gcc@1800000 {
+ compatible = "qcom,gcc-ipq8074";
+ reg = <0x1800000 0x80000>;
+ #clock-cells = <0x1>;
+ #reset-cells = <0x1>;
+ };
+
+ blsp1_uart5: serial@78b3000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78b3000 0x200>;
+ interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+ };
+
+ cpus {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x2>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x3>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <0x2>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
+ };
+
+ clocks {
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ xo: xo {
+ compatible = "fixed-clock";
+ clock-frequency = <19200000>;
+ #clock-cells = <0>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 039991f80831..dc3817593e14 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -88,6 +88,11 @@
no-map;
};
+ venus_mem: venus@89900000 {
+ reg = <0x0 0x89900000 0x0 0x600000>;
+ no-map;
+ };
+
mba_mem: mba@8ea00000 {
no-map;
reg = <0 0x8ea00000 0 0x100000>;
@@ -204,6 +209,17 @@
};
+ gpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -694,6 +710,84 @@
#thermal-sensor-cells = <1>;
};
+ apps_iommu: iommu@1ef0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+ ranges = <0 0x1e20000 0x40000>;
+ reg = <0x1ef0000 0x3000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_APSS_TCU_CLK>;
+ clock-names = "iface", "bus";
+ qcom,iommu-secure-id = <17>;
+
+ // mdp_0:
+ iommu-ctx@4000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x4000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ // venus_ns:
+ iommu-ctx@5000 {
+ compatible = "qcom,msm-iommu-v1-sec";
+ reg = <0x5000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpu_iommu: iommu@1f08000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+ ranges = <0 0x1f08000 0x10000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_GFX_TCU_CLK>;
+ clock-names = "iface", "bus";
+ qcom,iommu-secure-id = <18>;
+
+ // gfx3d_user:
+ iommu-ctx@1000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ // gfx3d_priv:
+ iommu-ctx@2000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 242 0>;
+ };
+ };
+
+ gpu@1c00000 {
+ compatible = "qcom,adreno-306.0", "qcom,adreno";
+ reg = <0x01c00000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "kgsl_3d0_irq";
+ clock-names =
+ "core",
+ "iface",
+ "mem",
+ "mem_iface",
+ "alt_mem_iface",
+ "gfx3d";
+ clocks =
+ <&gcc GCC_OXILI_GFX3D_CLK>,
+ <&gcc GCC_OXILI_AHB_CLK>,
+ <&gcc GCC_OXILI_GMEM_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_BIMC_GPU_CLK>,
+ <&gcc GFX3D_CLK_SRC>;
+ power-domains = <&gcc OXILI_GDSC>;
+ operating-points-v2 = <&gpu_opp_table>;
+ iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+ };
+
mdss: mdss@1a00000 {
compatible = "qcom,mdss";
reg = <0x1a00000 0x1000>,
@@ -735,6 +829,8 @@
"core_clk",
"vsync_clk";
+ iommus = <&apps_iommu 4>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -990,7 +1086,7 @@
};
replicator@824000 {
- compatible = "qcom,coresight-replicator1x", "arm,primecell";
+ compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0x824000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
@@ -1207,6 +1303,28 @@
};
};
};
+
+ venus: video-codec@1d00000 {
+ compatible = "qcom,msm8916-venus";
+ reg = <0x01d00000 0xff000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&gcc VENUS_GDSC>;
+ clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+ <&gcc GCC_VENUS0_AHB_CLK>,
+ <&gcc GCC_VENUS0_AXI_CLK>;
+ clock-names = "core", "iface", "bus";
+ iommus = <&apps_iommu 5>;
+ memory-region = <&venus_mem>;
+ status = "okay";
+
+ video-decoder {
+ compatible = "venus-decoder";
+ };
+
+ video-encoder {
+ compatible = "venus-encoder";
+ };
+ };
};
smd {
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8f085716e258..887b61c872dd 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -276,12 +276,83 @@
hwlocks = <&tcsr_mutex 3>;
};
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-msm8996";
+ qcom,glink-channels = "rpm_requests";
+
+ pm8994-regulators {
+ compatible = "qcom,rpm-pm8994-regulators";
+
+ pm8994_s1: s1 {};
+ pm8994_s2: s2 {};
+ pm8994_s3: s3 {};
+ pm8994_s4: s4 {};
+ pm8994_s5: s5 {};
+ pm8994_s6: s6 {};
+ pm8994_s7: s7 {};
+ pm8994_s8: s8 {};
+ pm8994_s9: s9 {};
+ pm8994_s10: s10 {};
+ pm8994_s11: s11 {};
+ pm8994_s12: s12 {};
+
+ pm8994_l1: l1 {};
+ pm8994_l2: l2 {};
+ pm8994_l3: l3 {};
+ pm8994_l4: l4 {};
+ pm8994_l5: l5 {};
+ pm8994_l6: l6 {};
+ pm8994_l7: l7 {};
+ pm8994_l8: l8 {};
+ pm8994_l9: l9 {};
+ pm8994_l10: l10 {};
+ pm8994_l11: l11 {};
+ pm8994_l12: l12 {};
+ pm8994_l13: l13 {};
+ pm8994_l14: l14 {};
+ pm8994_l15: l15 {};
+ pm8994_l16: l16 {};
+ pm8994_l17: l17 {};
+ pm8994_l18: l18 {};
+ pm8994_l19: l19 {};
+ pm8994_l20: l20 {};
+ pm8994_l21: l21 {};
+ pm8994_l22: l22 {};
+ pm8994_l23: l23 {};
+ pm8994_l24: l24 {};
+ pm8994_l25: l25 {};
+ pm8994_l26: l26 {};
+ pm8994_l27: l27 {};
+ pm8994_l28: l28 {};
+ pm8994_l29: l29 {};
+ pm8994_l30: l30 {};
+ pm8994_l31: l31 {};
+ pm8994_l32: l32 {};
+ };
+
+ };
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
+ rpm_msg_ram: memory@68000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x68000 0x6000>;
+ };
+
tcsr_mutex_regs: syscon@740000 {
compatible = "syscon";
reg = <0x740000 0x20000>;
@@ -303,6 +374,13 @@
reg = <0x9820000 0x1000>;
};
+ apcs_glb: mailbox@9820000 {
+ compatible = "qcom,msm8996-apcs-hmss-global";
+ reg = <0x9820000 0x1000>;
+
+ #mbox-cells = <1>;
+ };
+
gcc: clock-controller@300000 {
compatible = "qcom,gcc-msm8996";
#clock-cells = <1>;
@@ -538,6 +616,209 @@
<960000000>,
<825000000>;
};
+
+ qfprom@74000 {
+ compatible = "qcom,qfprom";
+ reg = <0x74000 0x8ff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qusb2p_hstx_trim: hstx_trim@24e {
+ reg = <0x24e 0x2>;
+ bits = <5 4>;
+ };
+
+ qusb2s_hstx_trim: hstx_trim@24f {
+ reg = <0x24f 0x1>;
+ bits = <1 4>;
+ };
+ };
+
+ phy@34000 {
+ compatible = "qcom,msm8996-qmp-pcie-phy";
+ reg = <0x34000 0x488>;
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_CLKREF_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ vdda-phy-supply = <&pm8994_l28>;
+ vdda-pll-supply = <&pm8994_l12>;
+
+ resets = <&gcc GCC_PCIE_PHY_BCR>,
+ <&gcc GCC_PCIE_PHY_COM_BCR>,
+ <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+ reset-names = "phy", "common", "cfg";
+ status = "disabled";
+
+ pciephy_0: lane@35000 {
+ reg = <0x035000 0x130>,
+ <0x035200 0x200>,
+ <0x035400 0x1dc>;
+ #phy-cells = <0>;
+
+ clock-output-names = "pcie_0_pipe_clk_src";
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "pipe0";
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "lane0";
+ };
+
+ pciephy_1: lane@36000 {
+ reg = <0x036000 0x130>,
+ <0x036200 0x200>,
+ <0x036400 0x1dc>;
+ #phy-cells = <0>;
+
+ clock-output-names = "pcie_1_pipe_clk_src";
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "pipe1";
+ resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+ reset-names = "lane1";
+ };
+
+ pciephy_2: lane@37000 {
+ reg = <0x037000 0x130>,
+ <0x037200 0x200>,
+ <0x037400 0x1dc>;
+ #phy-cells = <0>;
+
+ clock-output-names = "pcie_2_pipe_clk_src";
+ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+ clock-names = "pipe2";
+ resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+ reset-names = "lane2";
+ };
+ };
+
+ phy@7410000 {
+ compatible = "qcom,msm8996-qmp-usb3-phy";
+ reg = <0x7410000 0x1c4>;
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_CLKREF_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ vdda-phy-supply = <&pm8994_l28>;
+ vdda-pll-supply = <&pm8994_l12>;
+
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy", "common";
+ status = "disabled";
+
+ ssusb_phy_0: lane@7410200 {
+ reg = <0x7410200 0x200>,
+ <0x7410400 0x130>,
+ <0x7410600 0x1a8>;
+ #phy-cells = <0>;
+
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ };
+ };
+
+ hsusb_phy1: phy@7411000 {
+ compatible = "qcom,msm8996-qusb2-phy";
+ reg = <0x7411000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ vdda-pll-supply = <&pm8994_l12>;
+ vdda-phy-dpdm-supply = <&pm8994_l24>;
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ nvmem-cells = <&qusb2p_hstx_trim>;
+ status = "disabled";
+ };
+
+ hsusb_phy2: phy@7412000 {
+ compatible = "qcom,msm8996-qusb2-phy";
+ reg = <0x7412000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_RX2_USB2_CLKREF_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ vdda-pll-supply = <&pm8994_l12>;
+ vdda-phy-dpdm-supply = <&pm8994_l24>;
+
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+ nvmem-cells = <&qusb2s_hstx_trim>;
+ status = "disabled";
+ };
+
+ usb2: usb@7600000 {
+ compatible = "qcom,dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>,
+ <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_SLEEP_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+
+ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <60000000>;
+
+ power-domains = <&gcc USB30_GDSC>;
+ status = "disabled";
+
+ dwc3@7600000 {
+ compatible = "snps,dwc3";
+ reg = <0x7600000 0xcc00>;
+ interrupts = <0 138 0>;
+ phys = <&hsusb_phy2>;
+ phy-names = "usb2-phy";
+ };
+ };
+
+ usb3: usb@6a00000 {
+ compatible = "qcom,dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <120000000>;
+
+ power-domains = <&gcc USB30_GDSC>;
+ status = "disabled";
+
+ dwc3@6a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x6a00000 0xcc00>;
+ interrupts = <0 131 0>;
+ phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
};
adsp-pil {
@@ -558,6 +839,15 @@
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
+
+ smd-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ label = "lpass";
+ qcom,ipc = <&apcs 16 8>;
+ qcom,smd-edge = <1>;
+ qcom,remote-pid = <2>;
+ };
};
adsp-smp2p {
@@ -584,6 +874,30 @@
};
};
+ modem-smp2p {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 16 14>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
smp2p-slpi {
compatible = "qcom,smp2p";
qcom,smem = <481>, <430>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index d3879a4e8076..57673f92805d 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -8,6 +8,23 @@
reg = <0x2 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pmi8994_gpios: gpios@c000 {
+ compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <2 0xc0 0 IRQ_TYPE_NONE>,
+ <2 0xc1 0 IRQ_TYPE_NONE>,
+ <2 0xc2 0 IRQ_TYPE_NONE>,
+ <2 0xc3 0 IRQ_TYPE_NONE>,
+ <2 0xc4 0 IRQ_TYPE_NONE>,
+ <2 0xc5 0 IRQ_TYPE_NONE>,
+ <2 0xc6 0 IRQ_TYPE_NONE>,
+ <2 0xc7 0 IRQ_TYPE_NONE>,
+ <2 0xc8 0 IRQ_TYPE_NONE>,
+ <2 0xc9 0 IRQ_TYPE_NONE>;
+ };
};
pmic@3 {
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index acc4bb30d485..381928bc1358 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
always := $(dtb-y)
clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
index 95fe207cb6a3..dd4f9b6a4254 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
@@ -9,8 +9,6 @@
* kind, whether express or implied.
*/
-#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
-
/dts-v1/;
#include "r8a7795-es1.dtsi"
#include "ulcb.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
index b84c156ed696..3f7d5f51e428 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
@@ -8,8 +8,6 @@
* kind, whether express or implied.
*/
-#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
-
/dts-v1/;
#include "r8a7795-es1.dtsi"
#include "salvator-x.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
index a0ba7bd21ea3..aaa5e67a963e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
@@ -21,6 +21,14 @@
status = "disabled";
};
+ /delete-node/ usb-phy@ee0e0200;
+ /delete-node/ usb@ee0e0100;
+ /delete-node/ usb@ee0e0000;
+ /delete-node/ usb@e659c000;
+
+ /delete-node/ dma-controller@e6460000;
+ /delete-node/ dma-controller@e6470000;
+
fcpf2: fcp@fe952000 {
compatible = "renesas,fcpf";
reg = <0 0xfe952000 0 0x200>;
@@ -79,6 +87,5 @@
};
&du {
- compatible = "renesas,du-r8a7795";
vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 0426f41765f0..0afe777973de 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -9,8 +9,6 @@
* kind, whether express or implied.
*/
-#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
-
/dts-v1/;
#include "r8a7795.dtsi"
#include "ulcb.dtsi"
@@ -40,3 +38,17 @@
reg = <0x7 0x00000000 0x0 0x40000000>;
};
};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 721>,
+ <&cpg CPG_MOD 727>,
+ <&versaclock5 1>,
+ <&versaclock5 3>,
+ <&versaclock5 4>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 684fb3b9d154..17953070f38d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -8,8 +8,6 @@
* kind, whether express or implied.
*/
-#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
-
/dts-v1/;
#include "r8a7795.dtsi"
#include "salvator-x.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
index de354957144b..7675de5d4f2c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
@@ -8,8 +8,6 @@
* kind, whether express or implied.
*/
-#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
-
/dts-v1/;
#include "r8a7795.dtsi"
#include "salvator-xs.dtsi"
@@ -46,10 +44,12 @@
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
<&cpg CPG_MOD 727>,
+ <&versaclock6 1>,
<&x21_clk>,
- <&x22_clk>;
+ <&x22_clk>,
+ <&versaclock6 2>;
clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
- "dclkin.1", "dclkin.2";
+ "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
&ehci2 {
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index e31c1b660b3f..2938195b9571 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -12,6 +12,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7795-sysc.h>
+#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4
+
/ {
compatible = "renesas,r8a7795";
#address-cells = <2>;
@@ -691,6 +693,126 @@
};
};
+ drif00: rif@e6f40000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f40000 0 0x64>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 515>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 515>;
+ renesas,bonding = <&drif01>;
+ status = "disabled";
+ };
+
+ drif01: rif@e6f50000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f50000 0 0x64>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 514>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 514>;
+ renesas,bonding = <&drif00>;
+ status = "disabled";
+ };
+
+ drif10: rif@e6f60000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f60000 0 0x64>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 513>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 513>;
+ renesas,bonding = <&drif11>;
+ status = "disabled";
+ };
+
+ drif11: rif@e6f70000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f70000 0 0x64>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 512>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 512>;
+ renesas,bonding = <&drif10>;
+ status = "disabled";
+ };
+
+ drif20: rif@e6f80000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f80000 0 0x64>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 511>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 511>;
+ renesas,bonding = <&drif21>;
+ status = "disabled";
+ };
+
+ drif21: rif@e6f90000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f90000 0 0x64>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 510>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 510>;
+ renesas,bonding = <&drif20>;
+ status = "disabled";
+ };
+
+ drif30: rif@e6fa0000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6fa0000 0 0x64>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 509>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 509>;
+ renesas,bonding = <&drif31>;
+ status = "disabled";
+ };
+
+ drif31: rif@e6fb0000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6fb0000 0 0x64>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 508>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 508>;
+ renesas,bonding = <&drif30>;
+ status = "disabled";
+ };
+
hscif0: serial@e6540000 {
compatible = "renesas,hscif-r8a7795",
"renesas,rcar-gen3-hscif",
@@ -776,6 +898,68 @@
status = "disabled";
};
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a7795",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6e90000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 211>;
+ dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+ <&dmac2 0x41>, <&dmac2 0x40>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 211>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a7795",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 210>;
+ dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+ <&dmac2 0x43>, <&dmac2 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 210>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a7795",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 209>;
+ dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 209>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a7795",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a7795",
"renesas,rcar-gen3-scif", "renesas,scif";
@@ -1267,7 +1451,8 @@
};
sata: sata@ee300000 {
- compatible = "renesas,sata-r8a7795";
+ compatible = "renesas,sata-r8a7795",
+ "renesas,rcar-gen3-sata";
reg = <0 0xee300000 0 0x200000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 815>;
@@ -1314,6 +1499,34 @@
dma-channels = <2>;
};
+ usb_dmac2: dma-controller@e6460000 {
+ compatible = "renesas,r8a7795-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe6460000 0 0x100>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 326>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 326>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac3: dma-controller@e6470000 {
+ compatible = "renesas,r8a7795-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe6470000 0 0x100>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 329>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 329>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a7795";
reg = <0 0xee100000 0 0x2000>;
@@ -1392,6 +1605,18 @@
status = "disabled";
};
+ usb2_phy3: usb-phy@ee0e0200 {
+ compatible = "renesas,usb2-phy-r8a7795",
+ "renesas,rcar-gen3-usb2-phy";
+ reg = <0 0xee0e0200 0 0x700>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 700>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 700>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
ehci0: usb@ee080100 {
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
@@ -1399,6 +1624,7 @@
clocks = <&cpg CPG_MOD 703>;
phys = <&usb2_phy0>;
phy-names = "usb";
+ companion = <&ohci0>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 703>;
status = "disabled";
@@ -1411,6 +1637,7 @@
clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>;
phy-names = "usb";
+ companion = <&ohci1>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 702>;
status = "disabled";
@@ -1423,11 +1650,25 @@
clocks = <&cpg CPG_MOD 701>;
phys = <&usb2_phy2>;
phy-names = "usb";
+ companion = <&ohci2>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 701>;
status = "disabled";
};
+ ehci3: usb@ee0e0100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee0e0100 0 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 700>;
+ phys = <&usb2_phy3>;
+ phy-names = "usb";
+ companion = <&ohci3>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 700>;
+ status = "disabled";
+ };
+
ohci0: usb@ee080000 {
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
@@ -1464,6 +1705,18 @@
status = "disabled";
};
+ ohci3: usb@ee0e0000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee0e0000 0 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 700>;
+ phys = <&usb2_phy3>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 700>;
+ status = "disabled";
+ };
+
hsusb: usb@e6590000 {
compatible = "renesas,usbhs-r8a7795",
"renesas,rcar-gen3-usbhs";
@@ -1481,6 +1734,23 @@
status = "disabled";
};
+ hsusb3: usb@e659c000 {
+ compatible = "renesas,usbhs-r8a7795",
+ "renesas,rcar-gen3-usbhs";
+ reg = <0 0xe659c000 0 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 705>;
+ dmas = <&usb_dmac2 0>, <&usb_dmac2 1>,
+ <&usb_dmac3 0>, <&usb_dmac3 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <11>;
+ phys = <&usb2_phy3>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ status = "disabled";
+ };
+
pciec0: pcie@fe000000 {
compatible = "renesas,pcie-r8a7795",
"renesas,pcie-rcar-gen3";
@@ -1535,6 +1805,46 @@
status = "disabled";
};
+ imr-lx4@fe860000 {
+ compatible = "renesas,r8a7795-imr-lx4",
+ "renesas,imr-lx4";
+ reg = <0 0xfe860000 0 0x2000>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 823>;
+ power-domains = <&sysc R8A7795_PD_A3VC>;
+ resets = <&cpg 823>;
+ };
+
+ imr-lx4@fe870000 {
+ compatible = "renesas,r8a7795-imr-lx4",
+ "renesas,imr-lx4";
+ reg = <0 0xfe870000 0 0x2000>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 822>;
+ power-domains = <&sysc R8A7795_PD_A3VC>;
+ resets = <&cpg 822>;
+ };
+
+ imr-lx4@fe880000 {
+ compatible = "renesas,r8a7795-imr-lx4",
+ "renesas,imr-lx4";
+ reg = <0 0xfe880000 0 0x2000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 821>;
+ power-domains = <&sysc R8A7795_PD_A3VC>;
+ resets = <&cpg 821>;
+ };
+
+ imr-lx4@fe890000 {
+ compatible = "renesas,r8a7795-imr-lx4",
+ "renesas,imr-lx4";
+ reg = <0 0xfe890000 0 0x2000>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 820>;
+ power-domains = <&sysc R8A7795_PD_A3VC>;
+ resets = <&cpg 820>;
+ };
+
vspbc: vsp@fe920000 {
compatible = "renesas,vsp2";
reg = <0 0xfe920000 0 0x8000>;
@@ -1755,6 +2065,7 @@
};
du: display@feb00000 {
+ compatible = "renesas,du-r8a7795";
reg = <0 0xfeb00000 0 0x80000>,
<0 0xfeb90000 0 0x14>;
reg-names = "du", "lvds.0";
@@ -1768,6 +2079,7 @@
<&cpg CPG_MOD 721>,
<&cpg CPG_MOD 727>;
clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+ vsps = <&vspd0 0 &vspd1 0 &vspd2 0 &vspd0 1>;
status = "disabled";
ports {
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 38b58b7fca4b..daee1f1a3f68 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -9,8 +9,6 @@
* kind, whether express or implied.
*/
-#define CPG_AUDIO_CLK_I R8A7796_CLK_S0D4
-
/dts-v1/;
#include "r8a7796.dtsi"
#include "ulcb.dtsi"
@@ -30,3 +28,15 @@
reg = <0x6 0x00000000 0x0 0x40000000>;
};
};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 727>,
+ <&versaclock5 1>,
+ <&versaclock5 3>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2", "lvds.0",
+ "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index db4f162d6bdd..b317be03306e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -8,8 +8,6 @@
* kind, whether express or implied.
*/
-#define CPG_AUDIO_CLK_I R8A7796_CLK_S0D4
-
/dts-v1/;
#include "r8a7796.dtsi"
#include "salvator-x.dtsi"
@@ -29,3 +27,32 @@
reg = <0x6 0x00000000 0x0 0x80000000>;
};
};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 727>,
+ <&versaclock5 1>,
+ <&x21_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2", "lvds.0",
+ "dclkin.0", "dclkin.1", "dclkin.2";
+};
+
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ };
+};
+
+&hdmi0_con {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 1f6710912045..369092e17e34 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -12,6 +12,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7796-sysc.h>
+#define CPG_AUDIO_CLK_I R8A7796_CLK_S0D4
+
/ {
compatible = "renesas,r8a7796";
#address-cells = <2>;
@@ -639,6 +641,126 @@
};
};
+ drif00: rif@e6f40000 {
+ compatible = "renesas,r8a7796-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f40000 0 0x64>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 515>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 515>;
+ renesas,bonding = <&drif01>;
+ status = "disabled";
+ };
+
+ drif01: rif@e6f50000 {
+ compatible = "renesas,r8a7796-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f50000 0 0x64>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 514>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 514>;
+ renesas,bonding = <&drif00>;
+ status = "disabled";
+ };
+
+ drif10: rif@e6f60000 {
+ compatible = "renesas,r8a7796-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f60000 0 0x64>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 513>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 513>;
+ renesas,bonding = <&drif11>;
+ status = "disabled";
+ };
+
+ drif11: rif@e6f70000 {
+ compatible = "renesas,r8a7796-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f70000 0 0x64>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 512>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 512>;
+ renesas,bonding = <&drif10>;
+ status = "disabled";
+ };
+
+ drif20: rif@e6f80000 {
+ compatible = "renesas,r8a7796-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f80000 0 0x64>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 511>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 511>;
+ renesas,bonding = <&drif21>;
+ status = "disabled";
+ };
+
+ drif21: rif@e6f90000 {
+ compatible = "renesas,r8a7796-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f90000 0 0x64>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 510>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 510>;
+ renesas,bonding = <&drif20>;
+ status = "disabled";
+ };
+
+ drif30: rif@e6fa0000 {
+ compatible = "renesas,r8a7796-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6fa0000 0 0x64>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 509>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 509>;
+ renesas,bonding = <&drif31>;
+ status = "disabled";
+ };
+
+ drif31: rif@e6fb0000 {
+ compatible = "renesas,r8a7796-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6fb0000 0 0x64>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 508>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 508>;
+ renesas,bonding = <&drif30>;
+ status = "disabled";
+ };
+
avb: ethernet@e6800000 {
compatible = "renesas,etheravb-r8a7796",
"renesas,etheravb-rcar-gen3";
@@ -877,7 +999,7 @@
clocks = <&cpg CPG_MOD 211>;
dmas = <&dmac1 0x41>, <&dmac1 0x40>,
<&dmac2 0x41>, <&dmac2 0x40>;
- dma-names = "tx", "rx";
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 211>;
#address-cells = <1>;
@@ -893,7 +1015,7 @@
clocks = <&cpg CPG_MOD 210>;
dmas = <&dmac1 0x43>, <&dmac1 0x42>,
<&dmac2 0x43>, <&dmac2 0x42>;
- dma-names = "tx", "rx";
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 210>;
#address-cells = <1>;
@@ -1101,36 +1223,133 @@
dma-channels = <16>;
};
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a7796-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,r8a7796-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 331>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
hsusb: usb@e6590000 {
- /* placeholder */
+ compatible = "renesas,usbhs-r8a7796",
+ "renesas,rcar-gen3-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <11>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ status = "disabled";
};
xhci0: usb@ee000000 {
- /* placeholder */
+ compatible = "renesas,xhci-r8a7796",
+ "renesas,rcar-gen3-xhci";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
+ status = "disabled";
};
ohci0: usb@ee080000 {
- /* placeholder */
+ compatible = "generic-ohci";
+ reg = <0 0xee080000 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
};
ehci0: usb@ee080100 {
- /* placeholder */
+ compatible = "generic-ehci";
+ reg = <0 0xee080100 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ companion= <&ohci0>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ status = "disabled";
};
usb2_phy0: usb-phy@ee080200 {
- /* placeholder */
+ compatible = "renesas,usb2-phy-r8a7796",
+ "renesas,rcar-gen3-usb2-phy";
+ reg = <0 0xee080200 0 0x700>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ #phy-cells = <0>;
+ status = "disabled";
};
ohci1: usb@ee0a0000 {
- /* placeholder */
+ compatible = "generic-ohci";
+ reg = <0 0xee0a0000 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
+ status = "disabled";
};
ehci1: usb@ee0a0100 {
- /* placeholder */
+ compatible = "generic-ehci";
+ reg = <0 0xee0a0100 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ companion= <&ohci1>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
+ status = "disabled";
};
usb2_phy1: usb-phy@ee0a0200 {
- /* placeholder */
+ compatible = "renesas,usb2-phy-r8a7796",
+ "renesas,rcar-gen3-usb2-phy";
+ reg = <0 0xee0a0200 0 0x700>;
+ clocks = <&cpg CPG_MOD 702>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 702>;
+ #phy-cells = <0>;
+ status = "disabled";
};
sdhi0: sd@ee100000 {
@@ -1440,8 +1659,150 @@
/* placeholder */
};
+ fcpf0: fcp@fe950000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe950000 0 0x200>;
+ clocks = <&cpg CPG_MOD 615>;
+ power-domains = <&sysc R8A7796_PD_A3VC>;
+ resets = <&cpg 615>;
+ };
+
+ vspb: vsp@fe960000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe960000 0 0x8000>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 626>;
+ power-domains = <&sysc R8A7796_PD_A3VC>;
+ resets = <&cpg 626>;
+
+ renesas,fcp = <&fcpvb0>;
+ };
+
+ fcpvb0: fcp@fe96f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe96f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 607>;
+ power-domains = <&sysc R8A7796_PD_A3VC>;
+ resets = <&cpg 607>;
+ };
+
+ vspi0: vsp@fe9a0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9a0000 0 0x8000>;
+ interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 631>;
+ power-domains = <&sysc R8A7796_PD_A3VC>;
+ resets = <&cpg 631>;
+
+ renesas,fcp = <&fcpvi0>;
+ };
+
+ fcpvi0: fcp@fe9af000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9af000 0 0x200>;
+ clocks = <&cpg CPG_MOD 611>;
+ power-domains = <&sysc R8A7796_PD_A3VC>;
+ resets = <&cpg 611>;
+ };
+
+ vspd0: vsp@fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x4000>;
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+
+ renesas,fcp = <&fcpvd0>;
+ };
+
+ fcpvd0: fcp@fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 603>;
+ };
+
+ vspd1: vsp@fea28000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea28000 0 0x4000>;
+ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 622>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
+
+ renesas,fcp = <&fcpvd1>;
+ };
+
+ fcpvd1: fcp@fea2f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea2f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 602>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 602>;
+ };
+
+ vspd2: vsp@fea30000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea30000 0 0x4000>;
+ interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 621>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 621>;
+
+ renesas,fcp = <&fcpvd2>;
+ };
+
+ fcpvd2: fcp@fea37000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea37000 0 0x200>;
+ clocks = <&cpg CPG_MOD 601>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 601>;
+ };
+
+ hdmi0: hdmi@fead0000 {
+ compatible = "renesas,r8a7796-hdmi", "renesas,rcar-gen3-hdmi";
+ reg = <0 0xfead0000 0 0x10000>;
+ interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A7796_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 729>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dw_hdmi0_in: endpoint {
+ remote-endpoint = <&du_out_hdmi0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
du: display@feb00000 {
- /* placeholder */
+ compatible = "renesas,du-r8a7796";
+ reg = <0 0xfeb00000 0 0x70000>,
+ <0 0xfeb90000 0 0x14>;
+ reg-names = "du", "lvds.0";
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 727>;
+ clock-names = "du.0", "du.1", "du.2", "lvds.0";
+ status = "disabled";
+
+ vsps = <&vspd0 &vspd1 &vspd2>;
ports {
#address-cells = <1>;
@@ -1452,7 +1813,38 @@
du_out_rgb: endpoint {
};
};
+ port@1 {
+ reg = <1>;
+ du_out_hdmi0: endpoint {
+ remote-endpoint = <&dw_hdmi0_in>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ du_out_lvds0: endpoint {
+ };
+ };
};
};
+
+ imr-lx4@fe860000 {
+ compatible = "renesas,r8a7796-imr-lx4",
+ "renesas,imr-lx4";
+ reg = <0 0xfe860000 0 0x2000>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 823>;
+ power-domains = <&sysc R8A7796_PD_A3VC>;
+ resets = <&cpg 823>;
+ };
+
+ imr-lx4@fe870000 {
+ compatible = "renesas,r8a7796-imr-lx4",
+ "renesas,imr-lx4";
+ reg = <0 0xfe870000 0 0x2000>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 822>;
+ power-domains = <&sysc R8A7796_PD_A3VC>;
+ resets = <&cpg 822>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
new file mode 100644
index 000000000000..d144370051d5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -0,0 +1,46 @@
+/*
+ * Device Tree Source for the Draak board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a77995.dtsi"
+
+/ {
+ model = "Renesas Draak board based on r8a77995";
+ compatible = "renesas,draak", "renesas,r8a77995";
+
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x18000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <48000000>;
+};
+
+&scif2 {
+ status = "okay";
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
new file mode 100644
index 000000000000..d0f95b78c022
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -0,0 +1,155 @@
+/*
+ * Device Tree Source for the r8a77995 SoC
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "renesas,r8a77995";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ a53_0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0>;
+ device_type = "cpu";
+ power-domains = <&sysc 5>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ L2_CA53: cache-controller-1 {
+ compatible = "cache";
+ power-domains = <&sysc 21>;
+ cache-unified;
+ cache-level = <2>;
+ };
+ };
+
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@f1010000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xf1010000 0 0x1000>,
+ <0x0 0xf1020000 0 0x20000>,
+ <0x0 0xf1040000 0 0x20000>,
+ <0x0 0xf1060000 0 0x20000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&cpg CPG_MOD 408>;
+ clock-names = "clk";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 408>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ rwdt: watchdog@e6020000 {
+ compatible = "renesas,r8a77995-wdt",
+ "renesas,rcar-gen3-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a77995-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>;
+ clock-names = "extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ rst: reset-controller@e6160000 {
+ compatible = "renesas,r8a77995-rst";
+ reg = <0 0xe6160000 0 0x0200>;
+ };
+
+ pfc: pfc@e6060000 {
+ compatible = "renesas,pfc-r8a77995";
+ reg = <0 0xe6060000 0 0x508>;
+ };
+
+ prr: chipid@fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a77995-sysc";
+ reg = <0 0xe6180000 0 0x0400>;
+ #power-domain-cells = <1>;
+ };
+
+ scif2: serial@e6e88000 {
+ compatible = "renesas,scif-r8a77995",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e88000 0 64>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 310>,
+ <&cpg CPG_CORE 16>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 310>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index f903957da504..4786c67b5e65 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -268,10 +268,6 @@
remote-endpoint = <&adv7123_in>;
};
};
- port@3 {
- lvds_connector: endpoint {
- };
- };
};
};
diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
index 81227e3c2c6f..bf4d200fb546 100644
--- a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
@@ -18,3 +18,13 @@
&extal_clk {
clock-frequency = <16640000>;
};
+
+&i2c4 {
+ versaclock6: clock-generator@6a {
+ compatible = "idt,5p49v6901";
+ reg = <0x6a>;
+ #clock-cells = <1>;
+ clocks = <&x23_clk>;
+ clock-names = "xin";
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index d1a3f3b7a0ab..1b868df2393f 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -34,6 +34,16 @@
clock-frequency = <11289600>;
};
+ hdmi0-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi0_con: endpoint {
+ };
+ };
+ };
+
keyboard {
compatible = "gpio-keys";
@@ -120,6 +130,12 @@
#clock-cells = <0>;
clock-frequency = <24576000>;
};
+
+ x23_clk: x23-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
};
&audio_clk_a {
@@ -153,6 +169,23 @@
clock-frequency = <32768>;
};
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ };
+};
+
+&hdmi0_con {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
+
&i2c2 {
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
@@ -189,6 +222,24 @@
};
};
+&i2c4 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ versaclock5: clock-generator@6a {
+ compatible = "idt,5p49v5925";
+ reg = <0x6a>;
+ #clock-cells = <1>;
+ clocks = <&x23_clk>;
+ clock-names = "xin";
+ };
+};
+
+&i2c_dvfs {
+ status = "okay";
+};
+
&ohci1 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index bcfa53b1e6b7..f1c9b13cea5c 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,4 +1,5 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
@@ -7,6 +8,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index b9f36dad17e6..8e6a65431756 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -51,6 +51,25 @@
stdout-path = "serial2:1500000n8";
};
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
vcc_phy: vcc-phy-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_phy";
@@ -69,6 +88,151 @@
status = "okay";
};
+&i2c1 {
+ status = "okay";
+
+ rk805: rk805@18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk805-clkout2";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_io>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-name = "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_18: LDO_REG1 {
+ regulator-name = "vcc_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_emmc: LDO_REG2 {
+ regulator-name = "vcc18_emmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+ };
+ };
+};
+
+&pinctrl {
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
&uart2 {
status = "okay";
};
+
+&u2phy {
+ status = "okay";
+};
+
+&u2phy_host {
+ status = "okay";
+};
+
+&u2phy_otg {
+ status = "okay";
+};
+
+&usb20_otg {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
new file mode 100644
index 000000000000..d4f80786e7c2
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -0,0 +1,333 @@
+/*
+ * Copyright (c) 2017 PINE64
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+ model = "Pine64 Rock64";
+ compatible = "pine64,rock64", "rockchip,rk3328";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ gmac_clkin: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0m1_gpio>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_host_5v: vcc-host-5v-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb30_host_drv>;
+ regulator-name = "vcc_host_5v";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb20_host_drv>;
+ regulator-name = "vcc_host1_5v";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc18_emmc>;
+ status = "okay";
+};
+
+&gmac2io {
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_io>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_pins>;
+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x26>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ rk805: rk805@18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk805-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_sys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-name = "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_18: LDO_REG1 {
+ regulator-name = "vdd_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_emmc: LDO_REG2 {
+ regulator-name = "vcc_18emmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+ };
+ };
+};
+
+&io_domains {
+ status = "okay";
+
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_io>;
+ vccio4-supply = <&vcc_18>;
+ vccio5-supply = <&vcc_io>;
+ vccio6-supply = <&vcc_io>;
+ pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ usb20_host_drv: usb20-host-drv {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb3 {
+ usb30_host_drv: usb30-host-drv {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+
+ u2phy_host: host-port {
+ status = "okay";
+ };
+
+ u2phy_otg: otg-port {
+ status = "okay";
+ };
+};
+
+&usb20_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index d48bf5d9f8bd..6d615cb6e64d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/power/rk3328-power.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "rockchip,rk3328";
@@ -76,8 +77,11 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>;
+ dynamic-power-coefficient = <120>;
enable-method = "psci";
next-level-cache = <&l2>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu1: cpu@1 {
@@ -85,8 +89,10 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
clocks = <&cru ARMCLK>;
+ dynamic-power-coefficient = <120>;
enable-method = "psci";
next-level-cache = <&l2>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu2: cpu@2 {
@@ -94,8 +100,10 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
clocks = <&cru ARMCLK>;
+ dynamic-power-coefficient = <120>;
enable-method = "psci";
next-level-cache = <&l2>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu3: cpu@3 {
@@ -103,8 +111,10 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
clocks = <&cru ARMCLK>;
+ dynamic-power-coefficient = <120>;
enable-method = "psci";
next-level-cache = <&l2>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
l2: l2-cache0 {
@@ -112,6 +122,43 @@
};
};
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <40000>;
+ opp-suspend;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1225000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1296000000 {
+ opp-hz = /bits/ 64 <1296000000>;
+ opp-microvolt = <1300000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
amba {
compatible = "simple-bus";
#address-cells = <2>;
@@ -158,12 +205,84 @@
clock-output-names = "xin24m";
};
+ i2s0: i2s@ff000000 {
+ compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff000000 0x0 0x1000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&dmac 11>, <&dmac 12>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ i2s1: i2s@ff010000 {
+ compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff010000 0x0 0x1000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&dmac 14>, <&dmac 15>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ i2s2: i2s@ff020000 {
+ compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff020000 0x0 0x1000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&dmac 0>, <&dmac 1>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spdif: spdif@ff030000 {
+ compatible = "rockchip,rk3328-spdif";
+ reg = <0x0 0xff030000 0x0 0x1000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF_8CH>;
+ clock-names = "mclk", "hclk";
+ dmas = <&dmac 10>;
+ dma-names = "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdifm2_tx>;
+ status = "disabled";
+ };
+
+ pdm: pdm@ff040000 {
+ compatible = "rockchip,pdm";
+ reg = <0x0 0xff040000 0x0 0x1000>;
+ clocks = <&cru SCLK_PDM>, <&cru HCLK_PDM>;
+ clock-names = "pdm_clk", "pdm_hclk";
+ dmas = <&dmac 16>;
+ dma-names = "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pdmm0_clk
+ &pdmm0_sdi0
+ &pdmm0_sdi1
+ &pdmm0_sdi2
+ &pdmm0_sdi3>;
+ pinctrl-1 = <&pdmm0_clk_sleep
+ &pdmm0_sdi0_sleep
+ &pdmm0_sdi1_sleep
+ &pdmm0_sdi2_sleep
+ &pdmm0_sdi3_sleep>;
+ status = "disabled";
+ };
+
grf: syscon@ff100000 {
compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
reg = <0x0 0xff100000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+ io_domains: io-domains {
+ compatible = "rockchip,rk3328-io-voltage-domain";
+ status = "disabled";
+ };
+
power: power-controller {
compatible = "rockchip,rk3328-power-controller";
#power-domain-cells = <1>;
@@ -310,6 +429,108 @@
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
};
+ pwm0: pwm@ff1b0000 {
+ compatible = "rockchip,rk3328-pwm";
+ reg = <0x0 0xff1b0000 0x0 0x10>;
+ clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@ff1b0010 {
+ compatible = "rockchip,rk3328-pwm";
+ reg = <0x0 0xff1b0010 0x0 0x10>;
+ clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@ff1b0020 {
+ compatible = "rockchip,rk3328-pwm";
+ reg = <0x0 0xff1b0020 0x0 0x10>;
+ clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@ff1b0030 {
+ compatible = "rockchip,rk3328-pwm";
+ reg = <0x0 0xff1b0030 0x0 0x10>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwmir_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ thermal-zones {
+ soc_thermal: soc-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ sustainable-power = <1000>;
+
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ threshold: trip-point0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ target: trip-point1 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ soc_crit: soc-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
+ };
+ };
+
+ };
+
+ tsadc: tsadc@ff250000 {
+ compatible = "rockchip,rk3328-tsadc";
+ reg = <0x0 0xff250000 0x0 0x100>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+ assigned-clocks = <&cru SCLK_TSADC>;
+ assigned-clock-rates = <50000>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ pinctrl-names = "init", "default", "sleep";
+ pinctrl-0 = <&otp_gpio>;
+ pinctrl-1 = <&otp_out>;
+ pinctrl-2 = <&otp_gpio>;
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ rockchip,grf = <&grf>;
+ rockchip,hw-tshut-temp = <100000>;
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
+
saradc: adc@ff280000 {
compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc";
reg = <0x0 0xff280000 0x0 0x100>;
@@ -322,6 +543,51 @@
status = "disabled";
};
+ h265e_mmu: iommu@ff330200 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff330200 0 0x100>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "h265e_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vepu_mmu: iommu@ff340800 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff340800 0x0 0x40>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vepu_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vpu_mmu: iommu@ff350800 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff350800 0x0 0x40>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vpu_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ rkvdec_mmu: iommu@ff360480 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rkvdec_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vop_mmu: iommu@ff373f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff373f00 0x0 0x100>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "vop_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
cru: clock-controller@ff440000 {
compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
reg = <0x0 0xff440000 0x0 0x1000>;
@@ -374,6 +640,43 @@
<32768>;
};
+ usb2phy_grf: syscon@ff450000 {
+ compatible = "rockchip,rk3328-usb2phy-grf", "syscon",
+ "simple-mfd";
+ reg = <0x0 0xff450000 0x0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy: usb2-phy@100 {
+ compatible = "rockchip,rk3328-usb2phy";
+ reg = <0x100 0x10>;
+ clocks = <&xin24m>;
+ clock-names = "phyclk";
+ clock-output-names = "usb480m_phy";
+ #clock-cells = <0>;
+ assigned-clocks = <&cru USB480M>;
+ assigned-clock-parents = <&u2phy>;
+ status = "disabled";
+
+ u2phy_otg: otg-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "otg-bvalid", "otg-id",
+ "linestate";
+ status = "disabled";
+ };
+
+ u2phy_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ status = "disabled";
+ };
+ };
+ };
+
sdmmc: dwmmc@ff500000 {
compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff500000 0x0 0x4000>;
@@ -463,6 +766,45 @@
};
};
+ usb20_otg: usb@ff580000 {
+ compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x0 0xff580000 0x0 0x40000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <280>;
+ g-tx-fifo-size = <256 128 128 64 32 16>;
+ g-use-dma;
+ phys = <&u2phy_otg>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb_host0_ehci: usb@ff5c0000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xff5c0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST0>, <&u2phy>;
+ clock-names = "usbhost", "utmi";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host0_ohci: usb@ff5d0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xff5d0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST0>, <&u2phy>;
+ clock-names = "usbhost", "utmi";
+ phys = <&u2phy_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
gic: interrupt-controller@ff811000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -649,6 +991,62 @@
};
};
+ pdm-0 {
+ pdmm0_clk: pdmm0-clk {
+ rockchip,pins = <2 RK_PC2 2 &pcfg_pull_none>;
+ };
+
+ pdmm0_fsync: pdmm0-fsync {
+ rockchip,pins = <2 RK_PC7 2 &pcfg_pull_none>;
+ };
+
+ pdmm0_sdi0: pdmm0-sdi0 {
+ rockchip,pins = <2 RK_PC3 2 &pcfg_pull_none>;
+ };
+
+ pdmm0_sdi1: pdmm0-sdi1 {
+ rockchip,pins = <2 RK_PC4 2 &pcfg_pull_none>;
+ };
+
+ pdmm0_sdi2: pdmm0-sdi2 {
+ rockchip,pins = <2 RK_PC5 2 &pcfg_pull_none>;
+ };
+
+ pdmm0_sdi3: pdmm0-sdi3 {
+ rockchip,pins = <2 RK_PC6 2 &pcfg_pull_none>;
+ };
+
+ pdmm0_clk_sleep: pdmm0-clk-sleep {
+ rockchip,pins =
+ <2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdmm0_sdi0_sleep: pdmm0-sdi0-sleep {
+ rockchip,pins =
+ <2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdmm0_sdi1_sleep: pdmm0-sdi1-sleep {
+ rockchip,pins =
+ <2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdmm0_sdi2_sleep: pdmm0-sdi2-sleep {
+ rockchip,pins =
+ <2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdmm0_sdi3_sleep: pdmm0-sdi3-sleep {
+ rockchip,pins =
+ <2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdmm0_fsync_sleep: pdmm0-fsync-sleep {
+ rockchip,pins =
+ <2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+ };
+
tsadc {
otp_gpio: otp-gpio {
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index 4772917c5f7e..a37220a9387c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -156,7 +156,6 @@
disable-wp;
mmc-pwrseq = <&emmc_pwrseq>;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
index e631d424f08e..5e4d3a7015f5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -117,7 +117,6 @@
clock-frequency = <150000000>;
disable-wp;
non-removable;
- num-slots = <1>;
vmmc-supply = <&vcc_io>;
vqmmc-supply = <&vcc18_flash>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index fac116acc12f..d3f6c8e0d206 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -203,7 +203,6 @@
mmc-hs200-1_2v;
mmc-hs200-1_8v;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
status = "okay";
@@ -347,7 +346,6 @@
max-frequency = <50000000>;
cap-sd-highspeed;
card-detect-delay = <200>;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
vmmc-supply = <&vcc_sd>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index ff48edd8e348..13a9e22f5d2d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -86,12 +86,10 @@
cap-mmc-highspeed;
clock-frequency = <150000000>;
disable-wp;
- keep-power-in-suspend;
mmc-hs200-1_8v;
no-sdio;
no-sd;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
vmmc-supply = <&vcc_io>;
@@ -281,7 +279,6 @@
card-detect-delay = <200>;
no-emmc;
no-sdio;
- num-slots = <1>;
sd-uhs-sdr12;
sd-uhs-sdr25;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 7134181f1dc2..b3510d56517a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -189,7 +189,6 @@
disable-wp;
mmc-pwrseq = <&emmc_pwrseq>;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
status = "okay";
@@ -254,7 +253,6 @@
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
vmmc-supply = <&vcc_io>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 6d5dc0587e59..e0518b4bc6c2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -113,7 +113,8 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
-
+ clocks = <&cru ARMCLKL>;
+ operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>; /* min followed by max */
};
@@ -122,6 +123,8 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
+ clocks = <&cru ARMCLKL>;
+ operating-points-v2 = <&cluster0_opp>;
};
cpu_l2: cpu@2 {
@@ -129,6 +132,8 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
+ clocks = <&cru ARMCLKL>;
+ operating-points-v2 = <&cluster0_opp>;
};
cpu_l3: cpu@3 {
@@ -136,6 +141,8 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
+ clocks = <&cru ARMCLKL>;
+ operating-points-v2 = <&cluster0_opp>;
};
cpu_b0: cpu@100 {
@@ -143,7 +150,8 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
-
+ clocks = <&cru ARMCLKB>;
+ operating-points-v2 = <&cluster1_opp>;
#cooling-cells = <2>; /* min followed by max */
};
@@ -152,6 +160,8 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x101>;
enable-method = "psci";
+ clocks = <&cru ARMCLKB>;
+ operating-points-v2 = <&cluster1_opp>;
};
cpu_b2: cpu@102 {
@@ -159,6 +169,8 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x102>;
enable-method = "psci";
+ clocks = <&cru ARMCLKB>;
+ operating-points-v2 = <&cluster1_opp>;
};
cpu_b3: cpu@103 {
@@ -166,6 +178,62 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x103>;
enable-method = "psci";
+ clocks = <&cru ARMCLKB>;
+ operating-points-v2 = <&cluster1_opp>;
+ };
+ };
+
+ cluster0_opp: opp-table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <312000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <950000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <950000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1025000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1125000>;
+ };
+ };
+
+ cluster1_opp: opp-table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <312000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <950000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <950000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <975000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1050000>;
};
};
@@ -700,6 +768,19 @@
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
};
+ spdif: spdif@ff880000 {
+ compatible = "rockchip,rk3368-spdif";
+ reg = <0x0 0xff880000 0x0 0x1000>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
+ clock-names = "mclk", "hclk";
+ dmas = <&dmac_bus 3>;
+ dma-names = "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_tx>;
+ status = "disabled";
+ };
+
i2s_2ch: i2s-2ch@ff890000 {
compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s";
reg = <0x0 0xff890000 0x0 0x1000>;
@@ -724,6 +805,55 @@
status = "disabled";
};
+ iep_mmu: iommu@ff900800 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff900800 0x0 0x100>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "iep_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ isp_mmu: iommu@ff914000 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff914000 0x0 0x100>,
+ <0x0 0xff915000 0x0 0x100>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "isp_mmu";
+ #iommu-cells = <0>;
+ rockchip,disable-mmu-reset;
+ status = "disabled";
+ };
+
+ vop_mmu: iommu@ff930300 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff930300 0x0 0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vop_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ hevc_mmu: iommu@ff9a0440 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff9a0440 0x0 0x40>,
+ <0x0 0xff9a0480 0x0 0x40>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hevc_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vpu_mmu: iommu@ff9a0800 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff9a0800 0x0 0x100>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vepu_mmu", "vdpu_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@ffb71000 {
compatible = "arm,gic-400";
interrupt-controller;
@@ -1024,6 +1154,12 @@
};
};
+ spdif {
+ spdif_tx: spdif-tx {
+ rockchip,pins = <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
spi0 {
spi0_clk: spi0-clk {
rockchip,pins = <1 29 RK_FUNC_2 &pcfg_pull_up>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 42033bcc614c..56533c344ef2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -199,7 +199,7 @@
ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn>;
+ pinctrl-0 = <&pcie_clkreqn_cpm>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index ba1d9810ad1e..7fd4bfcaa38e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -43,6 +43,7 @@
/dts-v1/;
#include <dt-bindings/pwm/pwm.h>
#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
/ {
model = "Firefly-RK3399 Board";
@@ -550,7 +551,7 @@
ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn>;
+ pinctrl-0 = <&pcie_clkreqn_cpm>;
status = "okay";
};
@@ -630,9 +631,20 @@
status = "okay";
};
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
&sdhci {
bus-width = <8>;
- keep-power-in-suspend;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
non-removable;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index 7bd31066399b..a3d3cea7dc4f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -264,6 +264,50 @@ ap_i2c_dig: &i2c2 {
};
};
+&ppvar_bigcpu_pwm {
+ regulator-min-microvolt = <798674>;
+ regulator-max-microvolt = <1302172>;
+};
+
+&ppvar_bigcpu {
+ regulator-min-microvolt = <798674>;
+ regulator-max-microvolt = <1302172>;
+ ctrl-voltage-range = <798674 1302172>;
+};
+
+&ppvar_litcpu_pwm {
+ regulator-min-microvolt = <799065>;
+ regulator-max-microvolt = <1303738>;
+};
+
+&ppvar_litcpu {
+ regulator-min-microvolt = <799065>;
+ regulator-max-microvolt = <1303738>;
+ ctrl-voltage-range = <799065 1303738>;
+};
+
+&ppvar_gpu_pwm {
+ regulator-min-microvolt = <785782>;
+ regulator-max-microvolt = <1217729>;
+};
+
+&ppvar_gpu {
+ regulator-min-microvolt = <785782>;
+ regulator-max-microvolt = <1217729>;
+ ctrl-voltage-range = <785782 1217729>;
+};
+
+&ppvar_centerlogic_pwm {
+ regulator-min-microvolt = <800069>;
+ regulator-max-microvolt = <1049692>;
+};
+
+&ppvar_centerlogic {
+ regulator-min-microvolt = <800069>;
+ regulator-max-microvolt = <1049692>;
+ ctrl-voltage-range = <800069 1049692>;
+};
+
&saradc {
status = "okay";
vref-supply = <&pp1800_ap_io>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index eb5059344023..199a5118b20d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -164,14 +164,9 @@
vin-supply = <&ppvar_sys>;
};
- ppvar_bigcpu: ppvar-bigcpu {
+ ppvar_bigcpu_pwm: ppvar-bigcpu-pwm {
compatible = "pwm-regulator";
- regulator-name = "ppvar_bigcpu";
- /*
- * OVP circuit requires special handling which is not yet
- * represented. Keep disabled for now.
- */
- status = "disabled";
+ regulator-name = "ppvar_bigcpu_pwm";
pwms = <&pwm1 0 3337 0>;
pwm-supply = <&ppvar_sys>;
@@ -181,18 +176,28 @@
/* EC turns on w/ ap_core_en; always on for AP */
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <798674>;
- regulator-max-microvolt = <1302172>;
+ regulator-min-microvolt = <800107>;
+ regulator-max-microvolt = <1302232>;
};
- ppvar_litcpu: ppvar-litcpu {
+ ppvar_bigcpu: ppvar-bigcpu {
+ compatible = "vctrl-regulator";
+ regulator-name = "ppvar_bigcpu";
+
+ regulator-min-microvolt = <800107>;
+ regulator-max-microvolt = <1302232>;
+
+ ctrl-supply = <&ppvar_bigcpu_pwm>;
+ ctrl-voltage-range = <800107 1302232>;
+
+ regulator-settling-time-up-us = <322>;
+ min-slew-down-rate = <225>;
+ ovp-threshold-percent = <16>;
+ };
+
+ ppvar_litcpu_pwm: ppvar-litcpu-pwm {
compatible = "pwm-regulator";
- regulator-name = "ppvar_litcpu";
- /*
- * OVP circuit requires special handling which is not yet
- * represented. Keep disabled for now.
- */
- status = "disabled";
+ regulator-name = "ppvar_litcpu_pwm";
pwms = <&pwm2 0 3337 0>;
pwm-supply = <&ppvar_sys>;
@@ -202,18 +207,28 @@
/* EC turns on w/ ap_core_en; always on for AP */
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <799065>;
- regulator-max-microvolt = <1303738>;
+ regulator-min-microvolt = <797743>;
+ regulator-max-microvolt = <1307837>;
};
- ppvar_gpu: ppvar-gpu {
+ ppvar_litcpu: ppvar-litcpu {
+ compatible = "vctrl-regulator";
+ regulator-name = "ppvar_litcpu";
+
+ regulator-min-microvolt = <797743>;
+ regulator-max-microvolt = <1307837>;
+
+ ctrl-supply = <&ppvar_litcpu_pwm>;
+ ctrl-voltage-range = <797743 1307837>;
+
+ regulator-settling-time-up-us = <384>;
+ min-slew-down-rate = <225>;
+ ovp-threshold-percent = <16>;
+ };
+
+ ppvar_gpu_pwm: ppvar-gpu-pwm {
compatible = "pwm-regulator";
- regulator-name = "ppvar_gpu";
- /*
- * OVP circuit requires special handling which is not yet
- * represented. Keep disabled for now.
- */
- status = "disabled";
+ regulator-name = "ppvar_gpu_pwm";
pwms = <&pwm0 0 3337 0>;
pwm-supply = <&ppvar_sys>;
@@ -223,18 +238,28 @@
/* EC turns on w/ ap_core_en; always on for AP */
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <785782>;
- regulator-max-microvolt = <1217729>;
+ regulator-min-microvolt = <786384>;
+ regulator-max-microvolt = <1217747>;
};
- ppvar_centerlogic: ppvar-centerlogic {
+ ppvar_gpu: ppvar-gpu {
+ compatible = "vctrl-regulator";
+ regulator-name = "ppvar_gpu";
+
+ regulator-min-microvolt = <786384>;
+ regulator-max-microvolt = <1217747>;
+
+ ctrl-supply = <&ppvar_gpu_pwm>;
+ ctrl-voltage-range = <786384 1217747>;
+
+ regulator-settling-time-up-us = <390>;
+ min-slew-down-rate = <225>;
+ ovp-threshold-percent = <16>;
+ };
+
+ ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
compatible = "pwm-regulator";
- regulator-name = "ppvar_centerlogic";
- /*
- * OVP circuit requires special handling which is not yet
- * represented. Keep disabled for now.
- */
- status = "disabled";
+ regulator-name = "ppvar_centerlogic_pwm";
pwms = <&pwm3 0 3337 0>;
pwm-supply = <&ppvar_sys>;
@@ -244,8 +269,23 @@
/* EC turns on w/ ppvar_centerlogic_en; always on for AP */
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <800069>;
- regulator-max-microvolt = <1049692>;
+ regulator-min-microvolt = <799434>;
+ regulator-max-microvolt = <1049925>;
+ };
+
+ ppvar_centerlogic: ppvar-centerlogic {
+ compatible = "vctrl-regulator";
+ regulator-name = "ppvar_centerlogic";
+
+ regulator-min-microvolt = <799434>;
+ regulator-max-microvolt = <1049925>;
+
+ ctrl-supply = <&ppvar_centerlogic_pwm>;
+ ctrl-voltage-range = <799434 1049925>;
+
+ regulator-settling-time-up-us = <378>;
+ min-slew-down-rate = <225>;
+ ovp-threshold-percent = <16>;
};
/* Schematics call this PPVAR even though it's fixed */
@@ -555,6 +595,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&ppvar_gpu>;
+ status = "okay";
+};
+
ap_i2c_mic: &i2c1 {
status = "okay";
@@ -567,12 +612,7 @@ ap_i2c_mic: &i2c1 {
headsetcodec: rt5514@57 {
compatible = "realtek,rt5514";
reg = <0x57>;
- interrupt-parent = <&gpio1>;
- interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&mic_int>;
- realtek,dmic-init-delay = <20>;
- wakeup-source;
+ realtek,dmic-init-delay-ms = <20>;
};
};
@@ -781,9 +821,13 @@ ap_i2c_audio: &i2c8 {
wacky_spi_audio: spi2@0 {
compatible = "realtek,rt5514";
reg = <0>;
-
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mic_int>;
/* May run faster once verified. */
spi-max-frequency = <10000000>;
+ wakeup-source;
};
};
@@ -1031,7 +1075,7 @@ ap_i2c_audio: &i2c8 {
* hurt and dw_mmc will ignore it. We make sure to disable
* the pull though so we don't burn needless power.
*/
- sdmmc_cd: sdmcc-cd {
+ sdmmc_cd: sdmmc-cd {
rockchip,pins =
<0 7 RK_FUNC_1 &pcfg_pull_none>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
index be7fe635f7c1..d8a120f945c8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
@@ -118,6 +118,35 @@
opp-microvolt = <1250000>;
};
};
+
+ gpu_opp_table: opp-table2 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <800000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <297000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <825000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <850000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <925000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1075000>;
+ };
+ };
};
&cpu_l0 {
@@ -143,3 +172,7 @@
&cpu_b1 {
operating-points-v2 = <&cluster1_opp>;
};
+
+&gpu {
+ operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
index c83460db130a..81617bcf2522 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
@@ -110,6 +110,35 @@
opp-microvolt = <1200000>;
};
};
+
+ gpu_opp_table: opp-table2 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <800000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <297000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <825000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <875000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <925000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1100000>;
+ };
+ };
};
&cpu_l0 {
@@ -135,3 +164,7 @@
&cpu_b1 {
operating-points-v2 = <&cluster1_opp>;
};
+
+&gpu {
+ operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
new file mode 100644
index 000000000000..9a7486058455
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -0,0 +1,228 @@
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3399-puma.dtsi"
+
+/ {
+ model = "Theobroma Systems RK3399-Q7 SoM";
+ compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>;
+
+ sd-card-led {
+ label = "sd_card_led";
+ gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc3v3_baseboard: vcc3v3-baseboard {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_baseboard";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_otg: vcc5v0-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-name = "vcc5v0_otg";
+ regulator-always-on;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&i2c6 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&i2s0 {
+ status = "okay";
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqn_cpm>;
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&haikou_pin_hog>;
+
+ hog {
+ haikou_pin_hog: haikou-pin-hog {
+ rockchip,pins =
+ /* LID_BTN */
+ <RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* BATLOW# */
+ <RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* SLP_BTN# */
+ <RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* BIOS_DISABLE# */
+ <RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ led_sd_haikou: led-sd-gpio {
+ rockchip,pins =
+ <RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins =
+ <RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v3_baseboard>;
+ status = "okay";
+};
+
+&spi5 {
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_otg>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
new file mode 100644
index 000000000000..53ff3d191a1d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -0,0 +1,547 @@
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin_module>;
+
+ module-led {
+ label = "module_led";
+ gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ panic-indicator;
+ };
+ };
+
+ /*
+ * Overwrite the opp-table for CPUB as this board uses a different
+ * regulator (FAN53555) that only allows 10mV steps and therefore
+ * can't reach the operation point target voltages from rk3399-opp.dtsi
+ */
+ /delete-node/ opp-table1;
+ cluster1_opp: opp-table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <40000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <830000>;
+ opp-suspend;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <880000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <950000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1030000>;
+ };
+ opp06 {
+ opp-hz = /bits/ 64 <1608000000>;
+ opp-microvolt = <1100000>;
+ };
+ opp07 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1200000>;
+ };
+ opp08 {
+ opp-hz = /bits/ 64 <1992000000>;
+ opp-microvolt = <1230000>;
+ turbo-mode;
+ };
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ vcc1v2_phy: vcc1v2-phy {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v2_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+ enable-active-low;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 0>;
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ status = "okay";
+ };
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc1v2_phy>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x10>;
+ rx_delay = <0x10>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ clock-frequency = <400000>;
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc5v0_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc1v8_pmu>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_ldo1: LDO_REG1 {
+ regulator-name = "vcc_ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_hdmi: LDO_REG2 {
+ regulator-name = "vcc1v8_hdmi";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sd: LDO_REG4 {
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_ldo5: LDO_REG5 {
+ regulator-name = "vcc_ldo5";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ldo6: LDO_REG6 {
+ regulator-name = "vcc_ldo6";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc0v9_hdmi: LDO_REG7 {
+ regulator-name = "vcc0v9_hdmi";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_efuse: LDO_REG8 {
+ regulator-name = "vcc_efuse";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s3: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_gpu: regulator@60 {
+ compatible = "fcs,fan53555";
+ reg = <0x60>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1230000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ fan: fan@18 {
+ compatible = "ti,amc6821";
+ reg = <0x18>;
+ cooling-min-state = <0>;
+ cooling-max-state = <9>;
+ #cooling-cells = <2>;
+ };
+
+ rtc_twi: rtc@6f {
+ compatible = "isil,isl1208";
+ reg = <0x6f>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ vdd_cpu_b: regulator@60 {
+ compatible = "fcs,fan53555";
+ reg = <0x60>;
+ vin-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1230000>;
+ regulator-ramp-delay = <1000>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&io_domains {
+ status = "okay";
+ bt656-supply = <&vcc_1v8>;
+ audio-supply = <&vcc_1v8>;
+ sdmmc-supply = <&vcc_sd>;
+ gpio1830-supply = <&vcc_1v8>;
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmu1830-supply = <&vcc_1v8>;
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pinctrl {
+ i2c8 {
+ i2c8_xfer_a: i2c8-xfer {
+ rockchip,pins =
+ <RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ led_pin_module: led-module-gpio {
+ rockchip,pins =
+ <RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins =
+ <RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&sdmmc {
+ vqmmc = <&vcc_sd>;
+};
+
+&spi1 {
+ status = "okay";
+
+ norflash: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
new file mode 100644
index 000000000000..b7bd88fb3ae3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -0,0 +1,240 @@
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3399-sapphire.dtsi"
+
+/ {
+ model = "Excavator-RK3399 Board";
+ compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399";
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <100000>;
+ };
+
+ button-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <300000>;
+ };
+
+ back {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ press-threshold-microvolt = <985000>;
+ };
+
+ menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ press-threshold-microvolt = <1314000>;
+ };
+ };
+
+ edp_panel: edp-panel {
+ compatible ="lg,lp079qx1-sp0v", "simple-panel";
+ backlight = <&backlight>;
+ enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_panel_reset>;
+ power-supply = <&vcc3v3_s0>;
+
+ ports {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&edp_out_panel>;
+ };
+ };
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ linux,input-type = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_btn>;
+ wakeup-source;
+ };
+ };
+
+ rt5651-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "realtek,rt5651-codec";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Mic Jack", "MICBIAS1",
+ "IN1P", "Mic Jack",
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR";
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&rt5651>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&backlight {
+ enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&edp {
+ status = "okay";
+
+ ports {
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+
+ rt5651: rt5651@1a {
+ compatible = "rockchip,rt5651";
+ reg = <0x1a>;
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ clock-names = "mclk";
+ hp-det-gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
+ spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ accelerometer@68 {
+ compatible = "invensense,mpu6500";
+ reg = <0x68>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&i2s2 {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwr_btn: pwr-btn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lcd-panel {
+ lcd_panel_reset: lcd-panel-reset {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&spdif {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
new file mode 100644
index 000000000000..6c30bb02210d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -0,0 +1,644 @@
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "dt-bindings/pwm/pwm.h"
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255>;
+ default-brightness-level = <200>;
+ pwms = <&pwm0 0 25000 0>;
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l &pmic_dvs2>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc1v8_pmu>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v0_tp: LDO_REG2 {
+ regulator-name = "vcc3v0_tp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc_3v0>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
+ assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
+ assigned-clock-rates = <100000000>;
+ ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqn_cpm>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pmic_dvs2: pmic-dvs2 {
+ rockchip,pins =
+ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins =
+ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ keep-power-in-suspend;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ clock-frequency = <50000000>;
+ disable-wp;
+ keep-power-in-suspend;
+ max-frequency = <50000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ clock-frequency = <150000000>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vqmmc-supply = <&vcc_sdio>;
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 5b78ce16a87e..d79e9b3265b9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -110,6 +110,7 @@
enable-method = "psci";
#cooling-cells = <2>; /* min followed by max */
clocks = <&cru ARMCLKL>;
+ dynamic-power-coefficient = <100>;
};
cpu_l1: cpu@1 {
@@ -118,6 +119,7 @@
reg = <0x0 0x1>;
enable-method = "psci";
clocks = <&cru ARMCLKL>;
+ dynamic-power-coefficient = <100>;
};
cpu_l2: cpu@2 {
@@ -126,6 +128,7 @@
reg = <0x0 0x2>;
enable-method = "psci";
clocks = <&cru ARMCLKL>;
+ dynamic-power-coefficient = <100>;
};
cpu_l3: cpu@3 {
@@ -134,6 +137,7 @@
reg = <0x0 0x3>;
enable-method = "psci";
clocks = <&cru ARMCLKL>;
+ dynamic-power-coefficient = <100>;
};
cpu_b0: cpu@100 {
@@ -143,6 +147,7 @@
enable-method = "psci";
#cooling-cells = <2>; /* min followed by max */
clocks = <&cru ARMCLKB>;
+ dynamic-power-coefficient = <436>;
};
cpu_b1: cpu@101 {
@@ -151,9 +156,15 @@
reg = <0x0 0x101>;
enable-method = "psci";
clocks = <&cru ARMCLKB>;
+ dynamic-power-coefficient = <436>;
};
};
+ display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vopl_out>, <&vopb_out>;
+ };
+
pmu_a53 {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
@@ -289,6 +300,7 @@
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
+ power-domains = <&power RK3399_PD_SDIOAUDIO>;
resets = <&cru SRST_SDIO0>;
reset-names = "reset";
status = "disabled";
@@ -402,6 +414,7 @@
snps,dis-u2-freeclk-exists-quirk;
snps,dis_u2_susphy_quirk;
snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
status = "disabled";
};
};
@@ -429,6 +442,7 @@
snps,dis-u2-freeclk-exists-quirk;
snps,dis_u2_susphy_quirk;
snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
status = "disabled";
};
};
@@ -678,6 +692,7 @@
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
pinctrl-names = "default";
pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
+ power-domains = <&power RK3399_PD_SDIOAUDIO>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -950,6 +965,10 @@
};
/* These power domains are grouped by VD_LOGIC */
+ pd_edp@RK3399_PD_EDP {
+ reg = <RK3399_PD_EDP>;
+ clocks = <&cru PCLK_EDP_CTRL>;
+ };
pd_emmc@RK3399_PD_EMMC {
reg = <RK3399_PD_EMMC>;
clocks = <&cru ACLK_EMMC>;
@@ -967,6 +986,11 @@
<&cru SCLK_SDMMC>;
pm_qos = <&qos_sd>;
};
+ pd_sdioaudio@RK3399_PD_SDIOAUDIO {
+ reg = <RK3399_PD_SDIOAUDIO>;
+ clocks = <&cru HCLK_SDIO>;
+ pm_qos = <&qos_sdioaudio>;
+ };
pd_vio@RK3399_PD_VIO {
reg = <RK3399_PD_VIO>;
#address-cells = <1>;
@@ -1153,6 +1177,33 @@
status = "disabled";
};
+ vpu_mmu: iommu@ff650800 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff650800 0x0 0x40>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "vpu_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vdec_mmu: iommu@ff660480 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "vdec_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ iep_mmu: iommu@ff670800 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff670800 0x0 0x40>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "iep_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
efuse0: efuse@ff690000 {
compatible = "rockchip,rk3399-efuse";
reg = <0x0 0xff690000 0x0 0x80>;
@@ -1387,6 +1438,7 @@
clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
pinctrl-names = "default";
pinctrl-0 = <&spdif_bus>;
+ power-domains = <&power RK3399_PD_SDIOAUDIO>;
status = "disabled";
};
@@ -1401,6 +1453,7 @@
clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_8ch_bus>;
+ power-domains = <&power RK3399_PD_SDIOAUDIO>;
status = "disabled";
};
@@ -1414,6 +1467,7 @@
clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>;
pinctrl-names = "default";
pinctrl-0 = <&i2s1_2ch_bus>;
+ power-domains = <&power RK3399_PD_SDIOAUDIO>;
status = "disabled";
};
@@ -1425,6 +1479,224 @@
dma-names = "tx", "rx";
clock-names = "i2s_clk", "i2s_hclk";
clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
+ power-domains = <&power RK3399_PD_SDIOAUDIO>;
+ status = "disabled";
+ };
+
+ vopl: vop@ff8f0000 {
+ compatible = "rockchip,rk3399-vop-lit";
+ reg = <0x0 0xff8f0000 0x0 0x3efc>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+ assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+ assigned-clock-rates = <400000000>, <100000000>;
+ clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ iommus = <&vopl_mmu>;
+ power-domains = <&power RK3399_PD_VOPL>;
+ resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vopl_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vopl_out_mipi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mipi_in_vopl>;
+ };
+
+ vopl_out_edp: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&edp_in_vopl>;
+ };
+
+ vopl_out_hdmi: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&hdmi_in_vopl>;
+ };
+ };
+ };
+
+ vopl_mmu: iommu@ff8f3f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff8f3f00 0x0 0x100>;
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "vopl_mmu";
+ clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+ clock-names = "aclk", "hclk";
+ power-domains = <&power RK3399_PD_VOPL>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vopb: vop@ff900000 {
+ compatible = "rockchip,rk3399-vop-big";
+ reg = <0x0 0xff900000 0x0 0x3efc>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+ assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+ assigned-clock-rates = <400000000>, <100000000>;
+ clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ iommus = <&vopb_mmu>;
+ power-domains = <&power RK3399_PD_VOPB>;
+ resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vopb_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vopb_out_edp: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&edp_in_vopb>;
+ };
+
+ vopb_out_mipi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mipi_in_vopb>;
+ };
+
+ vopb_out_hdmi: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&hdmi_in_vopb>;
+ };
+ };
+ };
+
+ vopb_mmu: iommu@ff903f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff903f00 0x0 0x100>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "vopb_mmu";
+ clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+ clock-names = "aclk", "hclk";
+ power-domains = <&power RK3399_PD_VOPB>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ isp0_mmu: iommu@ff914000 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "isp0_mmu";
+ #iommu-cells = <0>;
+ rockchip,disable-mmu-reset;
+ status = "disabled";
+ };
+
+ isp1_mmu: iommu@ff924000 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "isp1_mmu";
+ #iommu-cells = <0>;
+ rockchip,disable-mmu-reset;
+ status = "disabled";
+ };
+
+ hdmi: hdmi@ff940000 {
+ compatible = "rockchip,rk3399-dw-hdmi";
+ reg = <0x0 0xff940000 0x0 0x20000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_SFR>, <&cru PLL_VPLL>, <&cru PCLK_VIO_GRF>;
+ clock-names = "iahb", "isfr", "vpll", "grf";
+ power-domains = <&power RK3399_PD_HDCP>;
+ reg-io-width = <4>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_hdmi>;
+ };
+ hdmi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_hdmi>;
+ };
+ };
+ };
+ };
+
+ mipi_dsi: mipi@ff960000 {
+ compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0x0 0xff960000 0x0 0x8000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>,
+ <&cru SCLK_DPHY_TX0_CFG>;
+ clock-names = "ref", "pclk", "phy_cfg";
+ power-domains = <&power RK3399_PD_VIO>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ mipi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi>;
+ };
+ mipi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi>;
+ };
+ };
+ };
+ };
+
+ edp: edp@ff970000 {
+ compatible = "rockchip,rk3399-edp";
+ reg = <0x0 0xff970000 0x0 0x8000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_hpd>;
+ power-domains = <&power RK3399_PD_EDP>;
+ resets = <&cru SRST_P_EDP_CTRL>;
+ reset-names = "dp";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_edp>;
+ };
+
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_edp>;
+ };
+ };
+ };
+ };
+
+ gpu: gpu@ff9a0000 {
+ compatible = "rockchip,rk3399-mali", "arm,mali-t860";
+ reg = <0x0 0xff9a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "gpu", "job", "mmu";
+ clocks = <&cru ACLK_GPU>;
+ power-domains = <&power RK3399_PD_GPU>;
status = "disabled";
};
@@ -1788,7 +2060,7 @@
<4 RK_PB5 RK_FUNC_1 &pcfg_pull_up>;
};
- sdmmc_cd: sdmcc-cd {
+ sdmmc_cd: sdmmc-cd {
rockchip,pins =
<0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>;
};
@@ -2092,16 +2364,6 @@
};
pcie {
- pcie_clkreqn: pci-clkreqn {
- rockchip,pins =
- <2 26 RK_FUNC_2 &pcfg_pull_none>;
- };
-
- pcie_clkreqnb: pci-clkreqnb {
- rockchip,pins =
- <4 24 RK_FUNC_1 &pcfg_pull_none>;
- };
-
pcie_clkreqn_cpm: pci-clkreqn-cpm {
rockchip,pins =
<2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile
index 4a13a3a97101..4bc091b365fd 100644
--- a/arch/arm64/boot/dts/socionext/Makefile
+++ b/arch/arm64/boot/dts/socionext/Makefile
@@ -2,7 +2,8 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ld11-global.dtb \
uniphier-ld11-ref.dtb \
uniphier-ld20-global.dtb \
- uniphier-ld20-ref.dtb
+ uniphier-ld20-ref.dtb \
+ uniphier-pxs3-ref.dtb
always := $(dtb-y)
clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
index 115357018ef7..2452b2243f42 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -9,7 +9,7 @@
*/
/dts-v1/;
-/include/ "uniphier-ld11.dtsi"
+#include "uniphier-ld11.dtsi"
/ {
model = "UniPhier LD11 Global Board (REF_LD11_GP)";
@@ -68,3 +68,7 @@
&usb2 {
status = "okay";
};
+
+&nand {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
index cc8ebe34c27c..ffb473ad2e0f 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
@@ -8,9 +8,9 @@
*/
/dts-v1/;
-/include/ "uniphier-ld11.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+#include "uniphier-ld11.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
/ {
model = "UniPhier LD11 Reference Board";
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index bdce5b89baec..ee4aff53a5f5 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -150,6 +150,17 @@
clocks = <&peri_clk 3>;
};
+ adamv@57920000 {
+ compatible = "socionext,uniphier-ld11-adamv",
+ "simple-mfd", "syscon";
+ reg = <0x57920000 0x1000>;
+
+ adamv_rst: reset {
+ compatible = "socionext,uniphier-ld11-adamv-reset";
+ #reset-cells = <1>;
+ };
+ };
+
i2c0: i2c@58780000 {
compatible = "socionext,uniphier-fi2c";
status = "disabled";
@@ -344,6 +355,13 @@
};
};
+ aidet: aidet@5fc20000 {
+ compatible = "socionext,uniphier-ld11-aidet";
+ reg = <0x5fc20000 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
gic: interrupt-controller@5fe00000 {
compatible = "arm,gic-v3";
reg = <0x5fe00000 0x10000>, /* GICD */
@@ -367,8 +385,23 @@
compatible = "socionext,uniphier-ld11-reset";
#reset-cells = <1>;
};
+
+ watchdog {
+ compatible = "socionext,uniphier-wdt";
+ };
+ };
+
+ nand: nand@68000000 {
+ compatible = "socionext,uniphier-denali-nand-v5b";
+ status = "disabled";
+ reg-names = "nand_data", "denali_reg";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ interrupts = <0 65 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ clocks = <&sys_clk 2>;
};
};
};
-/include/ "uniphier-pinctrl.dtsi"
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
index 9f620d4101b5..fc2bc9d75d35 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -9,7 +9,7 @@
*/
/dts-v1/;
-/include/ "uniphier-ld20.dtsi"
+#include "uniphier-ld20.dtsi"
/ {
model = "UniPhier LD20 Global Board (REF_LD20_GP)";
@@ -50,3 +50,7 @@
&i2c0 {
status = "okay";
};
+
+&nand {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
index 494166aee24c..1ca0c8620dc5 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -8,9 +8,9 @@
*/
/dts-v1/;
-/include/ "uniphier-ld20.dtsi"
-/include/ "uniphier-ref-daughter.dtsi"
-/include/ "uniphier-support-card.dtsi"
+#include "uniphier-ld20.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
/ {
model = "UniPhier LD20 Reference Board";
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index de1e75362817..a29c279b6e8e 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -219,6 +219,17 @@
clocks = <&peri_clk 3>;
};
+ adamv@57920000 {
+ compatible = "socionext,uniphier-ld20-adamv",
+ "simple-mfd", "syscon";
+ reg = <0x57920000 0x1000>;
+
+ adamv_rst: reset {
+ compatible = "socionext,uniphier-ld20-adamv-reset";
+ #reset-cells = <1>;
+ };
+ };
+
i2c0: i2c@58780000 {
compatible = "socionext,uniphier-fi2c";
status = "disabled";
@@ -309,7 +320,7 @@
sdctrl@59810000 {
compatible = "socionext,uniphier-ld20-sdctrl",
"simple-mfd", "syscon";
- reg = <0x59810000 0x800>;
+ reg = <0x59810000 0x400>;
sd_clk: clock {
compatible = "socionext,uniphier-ld20-sd-clock";
@@ -365,6 +376,13 @@
};
};
+ aidet: aidet@5fc20000 {
+ compatible = "socionext,uniphier-ld20-aidet";
+ reg = <0x5fc20000 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
gic: interrupt-controller@5fe00000 {
compatible = "arm,gic-v3";
reg = <0x5fe00000 0x10000>, /* GICD */
@@ -388,8 +406,23 @@
compatible = "socionext,uniphier-ld20-reset";
#reset-cells = <1>;
};
+
+ watchdog {
+ compatible = "socionext,uniphier-wdt";
+ };
+ };
+
+ nand: nand@68000000 {
+ compatible = "socionext,uniphier-denali-nand-v5b";
+ status = "disabled";
+ reg-names = "nand_data", "denali_reg";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ interrupts = <0 65 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ clocks = <&sys_clk 2>;
};
};
};
-/include/ "uniphier-pinctrl.dtsi"
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
index f42fb6f38bd3..9caabbb8bae3 120000..100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
@@ -1 +1 @@
-../../../../arm/boot/dts/uniphier-pinctrl.dtsi \ No newline at end of file
+#include <arm/uniphier-pinctrl.dtsi>
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
new file mode 100644
index 000000000000..d65f746a3f9d
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -0,0 +1,62 @@
+/*
+ * Device Tree Source for UniPhier PXs3 Reference Board
+ *
+ * Copyright (C) 2017 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include "uniphier-pxs3.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PXs3 Reference Board";
+ compatible = "socionext,uniphier-pxs3-ref", "socionext,uniphier-pxs3";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c6 = &i2c6;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0xa0000000>;
+ };
+};
+
+&ethsc {
+ interrupts = <0 52 4>;
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
new file mode 100644
index 000000000000..384729fa740f
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -0,0 +1,367 @@
+/*
+ * Device Tree Source for UniPhier PXs3 SoC
+ *
+ * Copyright (C) 2017 Socionext Inc.
+ * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/memreserve/ 0x80000000 0x02000000;
+
+/ {
+ compatible = "socionext,uniphier-pxs3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0 0x000>;
+ clocks = <&sys_clk 33>;
+ enable-method = "psci";
+ operating-points-v2 = <&cluster0_opp>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0 0x001>;
+ clocks = <&sys_clk 33>;
+ enable-method = "psci";
+ operating-points-v2 = <&cluster0_opp>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0 0x002>;
+ clocks = <&sys_clk 33>;
+ enable-method = "psci";
+ operating-points-v2 = <&cluster0_opp>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0 0x003>;
+ clocks = <&sys_clk 33>;
+ enable-method = "psci";
+ operating-points-v2 = <&cluster0_opp>;
+ };
+ };
+
+ cluster0_opp: opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-250000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ clock-latency-ns = <300>;
+ };
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ clock-latency-ns = <300>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ clock-latency-ns = <300>;
+ };
+ opp-650000000 {
+ opp-hz = /bits/ 64 <650000000>;
+ clock-latency-ns = <300>;
+ };
+ opp-666667000 {
+ opp-hz = /bits/ 64 <666667000>;
+ clock-latency-ns = <300>;
+ };
+ opp-866667000 {
+ opp-hz = /bits/ 64 <866667000>;
+ clock-latency-ns = <300>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ clock-latency-ns = <300>;
+ };
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ clock-latency-ns = <300>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ clocks {
+ refclk: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 4>,
+ <1 14 4>,
+ <1 11 4>,
+ <1 10 4>;
+ };
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+
+ serial0: serial@54006800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ interrupts = <0 33 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&peri_clk 0>;
+ };
+
+ serial1: serial@54006900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ interrupts = <0 35 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&peri_clk 1>;
+ };
+
+ serial2: serial@54006a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ interrupts = <0 37 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ clocks = <&peri_clk 2>;
+ };
+
+ serial3: serial@54006b00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006b00 0x40>;
+ interrupts = <0 177 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ clocks = <&peri_clk 3>;
+ };
+
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 41 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&peri_clk 4>;
+ clock-frequency = <100000>;
+ };
+
+ i2c1: i2c@58781000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&peri_clk 5>;
+ clock-frequency = <100000>;
+ };
+
+ i2c2: i2c@58782000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clocks = <&peri_clk 6>;
+ clock-frequency = <100000>;
+ };
+
+ i2c3: i2c@58783000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&peri_clk 7>;
+ clock-frequency = <100000>;
+ };
+
+ /* chip-internal connection for HDMI */
+ i2c6: i2c@58786000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&peri_clk 10>;
+ clock-frequency = <400000>;
+ };
+
+ system_bus: system-bus@58c00000 {
+ compatible = "socionext,uniphier-system-bus";
+ status = "disabled";
+ reg = <0x58c00000 0x400>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_system_bus>;
+ };
+
+ smpctrl@59801000 {
+ compatible = "socionext,uniphier-smpctrl";
+ reg = <0x59801000 0x400>;
+ };
+
+ sdctrl@59810000 {
+ compatible = "socionext,uniphier-pxs3-sdctrl",
+ "simple-mfd", "syscon";
+ reg = <0x59810000 0x400>;
+
+ sd_clk: clock {
+ compatible = "socionext,uniphier-pxs3-sd-clock";
+ #clock-cells = <1>;
+ };
+
+ sd_rst: reset {
+ compatible = "socionext,uniphier-pxs3-sd-reset";
+ #reset-cells = <1>;
+ };
+ };
+
+ perictrl@59820000 {
+ compatible = "socionext,uniphier-pxs3-perictrl",
+ "simple-mfd", "syscon";
+ reg = <0x59820000 0x200>;
+
+ peri_clk: clock {
+ compatible = "socionext,uniphier-pxs3-peri-clock";
+ #clock-cells = <1>;
+ };
+
+ peri_rst: reset {
+ compatible = "socionext,uniphier-pxs3-peri-reset";
+ #reset-cells = <1>;
+ };
+ };
+
+ emmc: sdhc@5a000000 {
+ compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+ reg = <0x5a000000 0x400>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&sys_clk 4>;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ cdns,phy-input-delay-legacy = <4>;
+ cdns,phy-input-delay-mmc-highspeed = <2>;
+ cdns,phy-input-delay-mmc-ddr = <3>;
+ cdns,phy-dll-delay-sdclk = <21>;
+ cdns,phy-dll-delay-sdclk-hsmmc = <21>;
+ };
+
+ soc-glue@5f800000 {
+ compatible = "socionext,uniphier-pxs3-soc-glue",
+ "simple-mfd", "syscon";
+ reg = <0x5f800000 0x2000>;
+
+ pinctrl: pinctrl {
+ compatible = "socionext,uniphier-pxs3-pinctrl";
+ };
+ };
+
+ aidet: aidet@5fc20000 {
+ compatible = "socionext,uniphier-pxs3-aidet";
+ reg = <0x5fc20000 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gic: interrupt-controller@5fe00000 {
+ compatible = "arm,gic-v3";
+ reg = <0x5fe00000 0x10000>, /* GICD */
+ <0x5fe80000 0x80000>; /* GICR */
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <1 9 4>;
+ };
+
+ sysctrl@61840000 {
+ compatible = "socionext,uniphier-pxs3-sysctrl",
+ "simple-mfd", "syscon";
+ reg = <0x61840000 0x10000>;
+
+ sys_clk: clock {
+ compatible = "socionext,uniphier-pxs3-clock";
+ #clock-cells = <1>;
+ };
+
+ sys_rst: reset {
+ compatible = "socionext,uniphier-pxs3-reset";
+ #reset-cells = <1>;
+ };
+
+ watchdog {
+ compatible = "socionext,uniphier-wdt";
+ };
+ };
+
+ nand: nand@68000000 {
+ compatible = "socionext,uniphier-denali-nand-v5b";
+ status = "disabled";
+ reg-names = "nand_data", "denali_reg";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ interrupts = <0 65 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ clocks = <&sys_clk 2>;
+ };
+ };
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi
index 4685a8d89cba..e66d999d9f5d 120000..100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi
@@ -1 +1 @@
-../../../../arm/boot/dts/uniphier-ref-daughter.dtsi \ No newline at end of file
+#include <arm/uniphier-ref-daughter.dtsi>
diff --git a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
index 1246db9be2a1..28c5b4ed1d95 120000..100644
--- a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
@@ -1 +1 @@
-../../../../arm/boot/dts/uniphier-support-card.dtsi \ No newline at end of file
+#include <arm/uniphier-support-card.dtsi>
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
index cdc6a437dcc7..b87b8316f4ac 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
@@ -11,7 +11,7 @@
* the License, or (at your option) any later version.
*/
-&amba {
+/ {
misc_clk: misc_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -29,12 +29,60 @@
#clock-cells = <0>;
clock-frequency = <75000000>;
};
+
+ clk100: clk100 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ clk600: clk600 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <600000000>;
+ };
};
&can0 {
clocks = <&misc_clk &misc_clk>;
};
+&can1 {
+ clocks = <&misc_clk &misc_clk>;
+};
+
+&fpd_dma_chan1 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan2 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan3 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan4 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan5 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan6 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan7 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan8 {
+ clocks = <&clk600>, <&clk100>;
+};
+
&gem0 {
clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index ef1b9e573af0..bf552674a834 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -13,13 +13,15 @@
/dts-v1/;
-/include/ "zynqmp.dtsi"
-/include/ "zynqmp-ep108-clk.dtsi"
+#include "zynqmp.dtsi"
+#include "zynqmp-ep108-clk.dtsi"
/ {
model = "ZynqMP EP108";
aliases {
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
serial0 = &uart0;
};
@@ -37,6 +39,10 @@
status = "okay";
};
+&can1 {
+ status = "okay";
+};
+
&gem0 {
status = "okay";
phy-handle = <&phy0>;
@@ -55,7 +61,7 @@
status = "okay";
clock-frequency = <400000>;
eeprom@54 {
- compatible = "at,24c64";
+ compatible = "atmel,24c64";
reg = <0x54>;
};
};
@@ -64,7 +70,7 @@
status = "okay";
clock-frequency = <400000>;
eeprom@55 {
- compatible = "at,24c64";
+ compatible = "atmel,24c64";
reg = <0x55>;
};
};
@@ -92,7 +98,7 @@
spi-max-frequency = <50000000>;
reg = <0>;
- spi0_flash0@00000000 {
+ spi0_flash0@0 {
label = "spi0_flash0";
reg = <0x0 0x100000>;
};
@@ -109,7 +115,7 @@
spi-max-frequency = <50000000>;
reg = <0>;
- spi1_flash0@00000000 {
+ spi1_flash0@0 {
label = "spi1_flash0";
reg = <0x0 0x100000>;
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 54dc28351c8c..7665fbddff28 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -20,33 +20,84 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
+ operating-points-v2 = <&cpu_opp_table>;
reg = <0x0>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x1>;
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x2>;
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x3>;
+ operating-points-v2 = <&cpu_opp_table>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
+
+ idle-states {
+ entry-method = "arm,psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x40000000>;
+ local-timer-stop;
+ entry-latency-us = <300>;
+ exit-latency-us = <600>;
+ min-residency-us = <10000>;
+ };
+ };
+ };
+
+ cpu_opp_table: cpu_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp00 {
+ opp-hz = /bits/ 64 <1199999988>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <500000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <599999994>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <500000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <399999996>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <500000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <299999997>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <500000>;
+ };
+ };
+
+ dcc: dcc {
+ compatible = "arm,dcc";
+ status = "disabled";
};
pmu {
@@ -119,6 +170,190 @@
rx-fifo-depth = <0x40>;
};
+ cci: cci@fd6e0000 {
+ compatible = "arm,cci-400";
+ reg = <0x0 0xfd6e0000 0x0 0x9000>;
+ ranges = <0x0 0x0 0xfd6e0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pmu@9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 123 4>,
+ <0 123 4>,
+ <0 123 4>,
+ <0 123 4>,
+ <0 123 4>;
+ };
+ };
+
+ /* GDMA */
+ fpd_dma_chan1: dma@fd500000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd500000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 124 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan2: dma@fd510000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd510000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 125 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan3: dma@fd520000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd520000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 126 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan4: dma@fd530000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd530000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 127 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan5: dma@fd540000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd540000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 128 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan6: dma@fd550000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd550000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 129 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan7: dma@fd560000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd560000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 130 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan8: dma@fd570000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd570000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 131 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ };
+
+ /* LPDDMA default allows only secured access. inorder to enable
+ * These dma channels, Users should ensure that these dma
+ * Channels are allowed for non secure access.
+ */
+ lpd_dma_chan1: dma@ffa80000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffa80000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 77 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan2: dma@ffa90000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffa90000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 78 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan3: dma@ffaa0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffaa0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 79 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan4: dma@ffab0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffab0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 80 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan5: dma@ffac0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffac0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 81 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan6: dma@ffad0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffad0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 82 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan7: dma@ffae0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffae0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 83 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan8: dma@ffaf0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffaf0000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 84 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <64>;
+ };
+
gem0: ethernet@ff0b0000 {
compatible = "cdns,gem";
status = "disabled";
@@ -215,12 +450,9 @@
<0x0 0xfd480000 0x0 0x1000>,
<0x80 0x00000000 0x0 0x1000000>;
reg-names = "breg", "pcireg", "cfg";
- ranges = <0x02000000 0x00000000 0xe0000000 0x00000000
- 0xe0000000 0x00000000 0x10000000
- /* non-prefetchable memory */
- 0x43000000 0x00000006 0x00000000 0x00000006
- 0x00000000 0x00000002 0x00000000>;
- /* prefetchable memory */
+ ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000 /* non-prefetchable memory */
+ 0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
+ bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
@@ -233,6 +465,16 @@
};
};
+ rtc: rtc@ffa60000 {
+ compatible = "xlnx,zynqmp-rtc";
+ status = "disabled";
+ reg = <0x0 0xffa60000 0x0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 26 4>, <0 27 4>;
+ interrupt-names = "alarm", "sec";
+ calibration = <0x8000>;
+ };
+
sata: ahci@fd0c0000 {
compatible = "ceva,ahci-1v84";
status = "disabled";
@@ -262,13 +504,14 @@
smmu: smmu@fd800000 {
compatible = "arm,mmu-500";
reg = <0x0 0xfd800000 0x0 0x20000>;
+ status = "disabled";
#global-interrupts = <1>;
interrupt-parent = <&gic>;
- interrupts = <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>;
+ interrupts = <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>;
};
spi0: spi@ff040000 {
@@ -330,7 +573,7 @@
};
uart0: serial@ff000000 {
- compatible = "cdns,uart-r1p8";
+ compatible = "cdns,uart-r1p12", "xlnx,xuartps";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
@@ -339,7 +582,7 @@
};
uart1: serial@ff010000 {
- compatible = "cdns,uart-r1p8";
+ compatible = "cdns,uart-r1p12", "xlnx,xuartps";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile
index 667806620f59..d86c4def6bc9 100644
--- a/arch/arm64/boot/dts/zte/Makefile
+++ b/arch/arm64/boot/dts/zte/Makefile
@@ -1,4 +1,5 @@
dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb
+dtb-$(CONFIG_ARCH_ZX) += zx296718-pcbox.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts
index bb900d2bbcfb..cb2519ecd724 100644
--- a/arch/arm64/boot/dts/zte/zx296718-evb.dts
+++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts
@@ -57,16 +57,28 @@
reg = <0x40000000 0x40000000>;
};
- sound0 {
- compatible = "simple-audio-card";
- simple-audio-card,name = "zx_snd_spdif0";
+ sound-spdif0 {
+ compatible = "audio-graph-card";
+ dais = <&spdif0_port>;
+ };
- simple-audio-card,cpu {
- sound-dai = <&spdif0>;
- };
+ sound-i2s0 {
+ compatible = "audio-graph-card";
+ dais = <&i2s0_port>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&amplifier_pins>;
+ pa-gpios = <&bgpio4 0 GPIO_ACTIVE_HIGH>;
+ widgets = "Line", "Line Out Jack";
+ routing = "Amplifier", "LINEOUTL",
+ "Amplifier", "LINEOUTR",
+ "Line Out Jack", "Amplifier";
+ };
+};
- simple-audio-card,codec {
- sound-dai = <&hdmi>;
+&aud96p22 {
+ port {
+ aud96p22_endpoint: endpoint {
+ remote-endpoint = <&i2s0_endpoint>;
};
};
};
@@ -77,6 +89,36 @@
&hdmi {
status = "okay";
+
+ port {
+ hdmi_endpoint: endpoint {
+ remote-endpoint = <&spdif0_endpoint>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2s0 {
+ status = "okay";
+
+ i2s0_port: port {
+ i2s0_endpoint: endpoint {
+ remote-endpoint = <&aud96p22_endpoint>;
+ dai-format = "i2s";
+ frame-master;
+ bitclock-master;
+ };
+ };
+};
+
+&pmm {
+ amplifier_pins: amplifier {
+ pins = "TSI3_DATA";
+ function = "BGPIO";
+ };
};
&sd1 {
@@ -85,6 +127,16 @@
&spdif0 {
status = "okay";
+
+ spdif0_port: port {
+ spdif0_endpoint: endpoint {
+ remote-endpoint = <&hdmi_endpoint>;
+ };
+ };
+};
+
+&tvenc {
+ status = "okay";
};
&uart0 {
diff --git a/arch/arm64/boot/dts/zte/zx296718-pcbox.dts b/arch/arm64/boot/dts/zte/zx296718-pcbox.dts
new file mode 100644
index 000000000000..e02509f7082b
--- /dev/null
+++ b/arch/arm64/boot/dts/zte/zx296718-pcbox.dts
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2017 Sanechips Technology Co., Ltd.
+ * Copyright 2017 Linaro Ltd.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include "zx296718.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "ZTE ZX296718 PCBOX Board";
+ compatible = "zte,zx296718-pcbox", "zte,zx296718";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ a53_vdd0v9: regulator-a53 {
+ compatible = "pwm-regulator";
+ pwms = <&pwm 3 1250 PWM_POLARITY_INVERTED>;
+ regulator-name = "A53_VDD0V9";
+ regulator-min-microvolt = <855000>;
+ regulator-max-microvolt = <1183000>;
+ pwm-dutycycle-unit = <100>;
+ pwm-dutycycle-range = <0 100>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sound-spdif0 {
+ compatible = "audio-graph-card";
+ dais = <&spdif0_port>;
+ };
+
+ sound-i2s0 {
+ compatible = "audio-graph-card";
+ dais = <&i2s0_port>;
+ };
+};
+
+&aud96p22 {
+ port {
+ aud96p22_endpoint: endpoint {
+ remote-endpoint = <&i2s0_endpoint>;
+ };
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&a53_vdd0v9>;
+};
+
+&emmc {
+ status = "okay";
+};
+
+&hdmi {
+ status = "disabled";
+
+ port {
+ hdmi_endpoint: endpoint {
+ remote-endpoint = <&spdif0_endpoint>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2s0 {
+ status = "okay";
+
+ i2s0_port: port {
+ i2s0_endpoint: endpoint {
+ remote-endpoint = <&aud96p22_endpoint>;
+ dai-format = "i2s";
+ frame-master;
+ bitclock-master;
+ };
+ };
+};
+
+&irdec {
+ status = "okay";
+};
+
+&pmm {
+ pwm3_pins: pwm3 {
+ pins = "KEY_ROW2";
+ function = "PWM";
+ };
+
+ vga_pins: vga {
+ pins = "KEY_COL1", "KEY_COL2", "VGA_HS", "VGA_VS";
+ function = "VGA";
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pins>;
+ status = "okay";
+};
+
+&sd0 {
+ status = "okay";
+};
+
+&sd1 {
+ status = "okay";
+};
+
+&spdif0 {
+ status = "okay";
+
+ spdif0_port: port {
+ spdif0_endpoint: endpoint {
+ remote-endpoint = <&hdmi_endpoint>;
+ };
+ };
+};
+
+&tvenc {
+ status = "disabled";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&vga {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vga_pins>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
index d83bf789c864..6eef64761009 100644
--- a/arch/arm64/boot/dts/zte/zx296718.dtsi
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -53,6 +53,13 @@
interrupt-parent = <&gic>;
aliases {
+ gpio0 = &bgpio0;
+ gpio1 = &bgpio1;
+ gpio2 = &bgpio2;
+ gpio3 = &bgpio3;
+ gpio4 = &bgpio4;
+ gpio5 = &bgpio5;
+ gpio6 = &bgpio6;
serial0 = &uart0;
};
@@ -120,26 +127,31 @@
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <866000>;
clock-latency-ns = <500000>;
};
opp-648000000 {
opp-hz = /bits/ 64 <648000000>;
+ opp-microvolt = <866000>;
clock-latency-ns = <500000>;
};
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <888000>;
clock-latency-ns = <500000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <898000>;
clock-latency-ns = <500000>;
};
opp-1188000000 {
opp-hz = /bits/ 64 <1188000000>;
+ opp-microvolt = <1015000>;
clock-latency-ns = <500000>;
};
};
@@ -283,11 +295,23 @@
compatible = "simple-bus";
ranges;
+ irdec: ir-decoder@111000 {
+ compatible = "zte,zx296718-irdec";
+ reg = <0x111000 0x1000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
aon_sysctrl: aon-sysctrl@116000 {
compatible = "zte,zx296718-aon-sysctrl", "syscon";
reg = <0x116000 0x1000>;
};
+ iocfg: pin-controller@119000 {
+ compatible = "zte,zx296718-iocfg";
+ reg = <0x119000 0x1000>;
+ };
+
uart0: uart@11f000 {
compatible = "arm,pl011", "arm,primecell";
arm,primecell-periphid = <0x001feffe>;
@@ -311,7 +335,6 @@
clock-frequency = <50000000>;
clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
clock-names = "biu", "ciu";
- num-slots = <1>;
max-frequency = <50000000>;
cap-sdio-irq;
cap-sd-highspeed;
@@ -336,7 +359,6 @@
clock-frequency = <167000000>;
clocks = <&topcrm SD1_AHB>, <&topcrm SD1_WCLK>;
clock-names = "biu", "ciu";
- num-slots = <1>;
max-frequency = <167000000>;
cap-sdio-irq;
cap-sd-highspeed;
@@ -360,12 +382,109 @@
#clock-cells = <1>;
};
+ bgpio0: gpio@142d000 {
+ compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+ reg = <0x142d000 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmm 0 48 16>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ bgpio1: gpio@142d040 {
+ compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+ reg = <0x142d040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmm 0 80 16>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ bgpio2: gpio@142d080 {
+ compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+ reg = <0x142d080 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmm 0 80 3
+ &pmm 3 32 4
+ &pmm 7 83 9>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ bgpio3: gpio@142d0c0 {
+ compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+ reg = <0x142d0c0 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmm 0 92 16>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ bgpio4: gpio@142d100 {
+ compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+ reg = <0x142d100 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmm 0 108 12
+ &pmm 12 121 4>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ bgpio5: gpio@142d140 {
+ compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+ reg = <0x142d140 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmm 0 125 16>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ bgpio6: gpio@142d180 {
+ compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
+ reg = <0x142d180 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pmm 0 141 2>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
lsp1crm: clock-controller@1430000 {
compatible = "zte,zx296718-lsp1crm";
reg = <0x01430000 0x1000>;
#clock-cells = <1>;
};
+ pwm: pwm@1439000 {
+ compatible = "zte,zx296718-pwm";
+ reg = <0x1439000 0x1000>;
+ clocks = <&lsp1crm LSP1_PWM_PCLK>,
+ <&lsp1crm LSP1_PWM_WCLK>;
+ clock-names = "pclk", "wclk";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
vou: vou@1440000 {
compatible = "zte,zx296718-vou";
#address-cells = <1>;
@@ -387,6 +506,16 @@
"main_wclk", "aux_wclk";
};
+ vga: vga@8000 {
+ compatible = "zte,zx296718-vga";
+ reg = <0x8000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topcrm VGA_I2C_WCLK>;
+ clock-names = "i2c_wclk";
+ zte,vga-power-control = <&sysctrl 0x170 0xe0>;
+ status = "disabled";
+ };
+
hdmi: hdmi@c000 {
compatible = "zte,zx296718-hdmi";
reg = <0xc000 0x4000>;
@@ -413,6 +542,12 @@
#clock-cells = <1>;
};
+ pmm: pin-controller@1462000 {
+ compatible = "zte,zx296718-pmm";
+ reg = <0x1462000 0x1000>;
+ zte,auxiliary-controller = <&iocfg>;
+ };
+
sysctrl: sysctrl@1463000 {
compatible = "zte,zx296718-sysctrl", "syscon";
reg = <0x1463000 0x1000>;
@@ -445,6 +580,38 @@
#clock-cells = <1>;
};
+ i2s0: i2s@1482000 {
+ compatible = "zte,zx296718-i2s", "zte,zx296702-i2s";
+ reg = <0x01482000 0x1000>;
+ clocks = <&audiocrm AUDIO_I2S0_WCLK>,
+ <&audiocrm AUDIO_I2S0_PCLK>;
+ clock-names = "wclk", "pclk";
+ assigned-clocks = <&audiocrm I2S0_WCLK_MUX>;
+ assigned-clock-parents = <&topcrm AUDIO_99M>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma 22>, <&dma 23>;
+ dma-names = "tx", "rx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@1486000 {
+ compatible = "zte,zx296718-i2c";
+ reg = <0x01486000 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&audiocrm AUDIO_I2C0_WCLK>;
+ clock-frequency = <1600000>;
+ status = "disabled";
+
+ aud96p22: codec@22 {
+ compatible = "zte,zx-aud96p22";
+ #sound-dai-cells = <0>;
+ reg = <0x22>;
+ };
+ };
+
spdif0: spdif@1488000 {
compatible = "zte,zx296702-spdif";
reg = <0x1488000 0x1000>;