diff options
author | Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> | 2022-05-07 21:49:07 +0200 |
---|---|---|
committer | Bjorn Andersson <bjorn.andersson@linaro.org> | 2022-06-27 16:40:19 -0500 |
commit | ff36bed5dc24ba25d4ff9882d3cdb37d31ceeaf4 (patch) | |
tree | b3b381d527c5a731a7934ce8c6e984cb68ca8265 /arch/arm64/boot/dts/qcom | |
parent | 4148a9eeb15152865d60b0913d96beb7ca166f9a (diff) | |
download | linux-ff36bed5dc24ba25d4ff9882d3cdb37d31ceeaf4.tar.bz2 |
arm64: dts: qcom: align PMIC GPIO pin configuration with DT schema
DT schema expects PMIC GPIO pin configuration nodes to be named with
'-state' suffix. Optional children should be either 'pinconf' or
followed with '-pins' suffix. This fixes dtbs_check warnings like:
sdm845-xiaomi-beryllium.dtb: gpios@c000: 'vol-up-active' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220507194913.261121-6-krzysztof.kozlowski@linaro.org
Diffstat (limited to 'arch/arm64/boot/dts/qcom')
22 files changed, 86 insertions, 86 deletions
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 7c1eab605c15..79254841715b 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -773,7 +773,7 @@ "USB_HUB_RESET_N_PM", "USB_SW_SEL_PM"; - usb_hub_reset_pm: usb-hub-reset-pm { + usb_hub_reset_pm: usb-hub-reset-pm-state { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; @@ -781,14 +781,14 @@ output-high; }; - usb_hub_reset_pm_device: usb-hub-reset-pm-device { + usb_hub_reset_pm_device: usb-hub-reset-pm-device-state { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; output-low; }; - usb_sw_sel_pm: usb-sw-sel-pm { + usb_sw_sel_pm: usb-sw-sel-pm-state { pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; @@ -797,7 +797,7 @@ output-high; }; - usb_sw_sel_pm_device: usb-sw-sel-pm-device { + usb_sw_sel_pm_device: usb-sw-sel-pm-device-state { pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; @@ -806,7 +806,7 @@ output-low; }; - pm8916_gpios_leds: pm8916-gpios-leds { + pm8916_gpios_leds: pm8916-gpios-leds-state { pins = "gpio1", "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 49afbb1a066a..e0e965f4dd2f 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -555,7 +555,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; - ls_exp_gpio_f: pm8994_gpio5 { + ls_exp_gpio_f: pm8994-gpio5-state { pinconf { pins = "gpio5"; output-low; @@ -563,7 +563,7 @@ }; }; - bt_en_gpios: bt_en_gpios { + bt_en_gpios: bt-en-pios-state { pinconf { pins = "gpio19"; function = PMIC_GPIO_FUNC_NORMAL; @@ -574,7 +574,7 @@ }; }; - wlan_en_gpios: wlan_en_gpios { + wlan_en_gpios: wlan-en-gpios-state { pinconf { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; @@ -585,7 +585,7 @@ }; }; - audio_mclk: clk_div1 { + audio_mclk: clk-div1-state { pinconf { pins = "gpio15"; function = "func1"; @@ -593,7 +593,7 @@ }; }; - volume_up_gpio: pm8996_gpio2 { + volume_up_gpio: pm8996-gpio2-state { pinconf { pins = "gpio2"; function = "normal"; @@ -605,7 +605,7 @@ }; }; - divclk4_pin_a: divclk4 { + divclk4_pin_a: divclk4-state { pinconf { pins = "gpio18"; function = PMIC_GPIO_FUNC_FUNC2; @@ -615,7 +615,7 @@ }; }; - usb3_vbus_det_gpio: pm8996_gpio22 { + usb3_vbus_det_gpio: pm8996-gpio22-state { pinconf { pins = "gpio22"; function = PMIC_GPIO_FUNC_NORMAL; @@ -671,7 +671,7 @@ "NC", "NC"; - usb2_vbus_det_gpio: pmi8996_gpio6 { + usb2_vbus_det_gpio: pmi8996-gpio6-state { pinconf { pins = "gpio6"; function = PMIC_GPIO_FUNC_NORMAL; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 9b4b7de7cec2..636a3b6ba7dc 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -463,7 +463,7 @@ }; &pm8916_gpios { - nfc_clk_req: nfc-clk-req { + nfc_clk_req: nfc-clk-req-state { pins = "gpio2"; function = "func1"; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index cc038f9b641f..9161b9e1bda1 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -470,7 +470,7 @@ }; &pm8994_gpios { - bt_en_gpios: bt_en_gpios { + bt_en_gpios: bt-en-gpios-state { pinconf { pins = "gpio19"; function = PMIC_GPIO_FUNC_NORMAL; @@ -481,7 +481,7 @@ }; }; - divclk4_pin_a: divclk4 { + divclk4_pin_a: divclk4-state { pinconf { pins = "gpio18"; function = PMIC_GPIO_FUNC_FUNC2; @@ -519,19 +519,19 @@ * TODO: remove once a driver is available * TODO: add VBUS GPIO 5 */ - hd3ss460_pol: pol_low { + hd3ss460_pol: pol-low-state { pins = "gpio8"; drive-strength = <3>; bias-pull-down; }; - hd3ss460_amsel: amsel_high { + hd3ss460_amsel: amsel-high-state { pins = "gpio9"; drive-strength = <1>; bias-pull-up; }; - hd3ss460_en: en_high { + hd3ss460_en: en-high-state { pins = "gpio10"; drive-strength = <1>; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index 0486357b9769..e165b5e890a0 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -242,14 +242,14 @@ * probably a reason for it, and just to be on the safe side, we follow suit. */ pm8994_gpios_defaults: pm8994-gpios-default-state { - pm8994-gpio1-nc { + pm8994-gpio1-nc-pins { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; bias-high-impedance; }; - vol-down-n { + vol-down-n-pins { pins = "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -259,7 +259,7 @@ power-source = <PM8994_GPIO_S4>; }; - vol-up-n { + vol-up-n-pins { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -268,7 +268,7 @@ power-source = <PM8994_GPIO_S4>; }; - camera-snapshot-n { + camera-snapshot-n-pins { pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -278,7 +278,7 @@ power-source = <PM8994_GPIO_S4>; }; - camera-focus-n { + camera-focus-n-pins { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -288,7 +288,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio6-nc { + pm8994-gpio6-nc-pins { pins = "gpio6"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -296,7 +296,7 @@ power-source = <PM8994_GPIO_VPH>; }; - nfc-download { + nfc-download-pins { pins = "gpio7"; function = PMIC_GPIO_FUNC_NORMAL; output-low; @@ -306,7 +306,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio8-nc { + pm8994-gpio8-nc-pins { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; output-low; @@ -316,7 +316,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pm8994-gpio9-nc { + pm8994-gpio9-nc-pins { pins = "gpio9"; function = PMIC_GPIO_FUNC_NORMAL; output-high; @@ -326,7 +326,7 @@ power-source = <PM8994_GPIO_VPH>; }; - nfc-clock { + nfc-clock-pins { pins = "gpio10"; function = PMIC_GPIO_FUNC_NORMAL; input-enable; @@ -336,7 +336,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio11-nc { + pm8994-gpio11-nc-pins { pins = "gpio11"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -344,7 +344,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pm8994-gpio12-nc { + pm8994-gpio12-nc-pins { pins = "gpio12"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -352,7 +352,7 @@ power-source = <PM8994_GPIO_VPH>; }; - ear-enable { + ear-enable-pins { pins = "gpio13"; function = PMIC_GPIO_FUNC_NORMAL; output-high; @@ -362,7 +362,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio14-nc { + pm8994-gpio14-nc-pins { pins = "gpio14"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -372,7 +372,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pm-divclk1-gpio { + pm-divclk1-gpio-pins { pins = "gpio15"; function = "func1"; output-high; @@ -382,13 +382,13 @@ power-source = <PM8994_GPIO_VPH>; }; - pmi-clk-gpio { + pmi-clk-gpio-pins { pins = "gpio16"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; }; - pm8994-gpio17-nc { + pm8994-gpio17-nc-pins { pins = "gpio17"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -396,7 +396,7 @@ power-source = <PM8994_GPIO_VPH>; }; - rome-sleep { + rome-sleep-pins { pins = "gpio18"; function = PMIC_GPIO_FUNC_FUNC2; output-low; @@ -406,7 +406,7 @@ power-source = <PM8994_GPIO_S4>; }; - pm8994-gpio19-nc { + pm8994-gpio19-nc-pins { pins = "gpio19"; function = PMIC_GPIO_FUNC_NORMAL; output-low; @@ -416,7 +416,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pm8994-gpio22-nc { + pm8994-gpio22-nc-pins { pins = "gpio22"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -441,34 +441,34 @@ "RF_ID"; pm8994_mpps_defaults: pm8994-mpps-default-state { - lcd-id_adc-mpp { + lcd-id_adc-mpp-pins { pins = "mpp2"; function = "analog"; input-enable; qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>; }; - pm-mpp4-nc { + pm-mpp4-nc-pins { pins = "mpp4"; function = "digital"; bias-high-impedance; power-source = <PM8994_GPIO_VPH>; }; - flash-therm-mpp { + flash-therm-mpp-pins { pins = "mpp5"; function = "analog"; input-enable; qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>; }; - mpp6-nc { + mpp6-nc-pins { pins = "mpp6"; function = "digital"; bias-high-impedance; }; - rf-id-mpp { + rf-id-mpp-pins { pins = "mpp8"; function = "analog"; input-enable; @@ -499,7 +499,7 @@ "NC"; pmi8994_gpios_defaults: pmi8994-gpios-default-state { - vib-ldo-en-gpio { + vib-ldo-en-gpio-pins { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -508,7 +508,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio2-nc { + pmi-gpio2-nc-pins { pins = "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -518,7 +518,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pmi-gpio3-nc { + pmi-gpio3-nc-pins { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -528,7 +528,7 @@ power-source = <PM8994_GPIO_VPH>; }; - pmi-gpio4-nc { + pmi-gpio4-nc-pins { pins = "gpio4"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -537,7 +537,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio5-nc { + pmi-gpio5-nc-pins { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -546,7 +546,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio6-nc { + pmi-gpio6-nc-pins { pins = "gpio6"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -555,7 +555,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio7-nc { + pmi-gpio7-nc-pins { pins = "gpio7"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -564,7 +564,7 @@ power-source = <PM8994_GPIO_S4>; }; - pmi-gpio8-nc { + pmi-gpio8-nc-pins { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; @@ -573,13 +573,13 @@ power-source = <PM8994_GPIO_S4>; }; - usb-switch-sel { + usb-switch-sel-pins { pins = "gpio9"; function = PMIC_GPIO_FUNC_NORMAL; drive-push-pull; }; - pmi-gpio10-nc { + pmi-gpio10-nc-pins { pins = "gpio10"; function = PMIC_GPIO_FUNC_NORMAL; output-low; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index a7090befc16f..259d2fcc6e7e 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -608,7 +608,7 @@ }; &pm8994_gpios { - wlan_en_default: wlan-en-default { + wlan_en_default: wlan-en-state { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; output-low; @@ -617,7 +617,7 @@ bias-disable; }; - rome_enable_default: rome-enable-default { + rome_enable_default: rome-enable-state { pins = "gpio9"; function = PMIC_GPIO_FUNC_NORMAL; output-high; @@ -625,7 +625,7 @@ power-source = <PM8994_GPIO_VPH>; }; - divclk1_default: divclk1_default { + divclk1_default: divclk1-state { pins = "gpio15"; function = PMIC_GPIO_FUNC_FUNC1; bias-disable; @@ -633,7 +633,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; }; - divclk4_pin_a: divclk4 { + divclk4_pin_a: divclk4-state { pins = "gpio18"; function = PMIC_GPIO_FUNC_FUNC2; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index 22978d06f85b..ec68c03868db 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -257,7 +257,7 @@ "UIM_BATT_ALARM", /* GPIO_21 */ "NC"; /* GPIO_22 */ - divclk2_pin_a: divclk2 { + divclk2_pin_a: divclk2-state { pins = "gpio16"; function = PMIC_GPIO_FUNC_FUNC2; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index adbb933f4cd1..39f09f29a784 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -345,7 +345,7 @@ }; &pm8998_gpio { - vol_up_pin_a: vol-up-active { + vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; bias-pull-up; @@ -353,7 +353,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_focus_pin_a: cam-focus-btn-active { + cam_focus_pin_a: cam-focus-btn-active-state { pins = "gpio7"; function = "normal"; bias-pull-up; @@ -361,7 +361,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_snapshot_pin_a: cam-snapshot-btn-active { + cam_snapshot_pin_a: cam-snapshot-btn-active-state { pins = "gpio8"; function = "normal"; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts index 9563eb62db88..ef2a88a64d32 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts @@ -32,7 +32,7 @@ }; &pmi8998_gpio { - button_backlight_default: button-backlight-default { + button_backlight_default: button-backlight-state { pinconf { pins = "gpio5"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index f61c6d357847..9460e517c50a 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -270,7 +270,7 @@ }; &pm8998_gpio { - vol_keys_default: vol-keys-default { + vol_keys_default: vol-keys-state { pins = "gpio5", "gpio6"; function = "normal"; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts index 978495a8a6b9..20fe0394a3c1 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts @@ -38,7 +38,7 @@ }; &pmi8998_gpio { - disp_dvdd_en: disp-dvdd-en-active { + disp_dvdd_en: disp-dvdd-en-active-state { pins = "gpio10"; function = "normal"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index d9a2ac875dc8..2269b714272e 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -286,7 +286,7 @@ }; &pm8998_gpio { - vol_down_pin_a: vol-down-active { + vol_down_pin_a: vol-down-active-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -294,7 +294,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_focus_pin_a: cam-focus-btn-active { + cam_focus_pin_a: cam-focus-btn-active-state { pins = "gpio7"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -302,7 +302,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_snapshot_pin_a: cam-snapshot-btn-active { + cam_snapshot_pin_a: cam-snapshot-btn-active-state { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -310,7 +310,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - audio_mclk_pin: audio-mclk-pin-active { + audio_mclk_pin: audio-mclk-pin-active-state { pins = "gpio13"; function = "func2"; power-source = <0>; @@ -318,7 +318,7 @@ }; &pmi8998_gpio { - cam_vio_default: cam-vio-active { + cam_vio_default: cam-vio-active-state { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; bias-disable; @@ -328,7 +328,7 @@ power-source = <1>; }; - vib_default: vib-en { + vib_default: vib-en-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 2f3104a84417..1721ebe5759b 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -304,7 +304,7 @@ }; &pms405_gpios { - usb_vbus_boost_pin: usb-vbus-boost-pin { + usb_vbus_boost_pin: usb-vbus-boost-state { pinconf { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; @@ -312,7 +312,7 @@ power-source = <1>; }; }; - usb3_vbus_pin: usb3-vbus-pin { + usb3_vbus_pin: usb3-vbus-state { pinconf { pins = "gpio12"; function = PMIC_GPIO_FUNC_NORMAL; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 0e63f707b911..9549341f98fb 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -796,7 +796,7 @@ "NC", "PM3003A_MODE"; - lt9611_rst_pin: lt9611-rst-pin { + lt9611_rst_pin: lt9611-rst-state { pins = "gpio5"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index acdb36f4479f..33ada24ec917 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -467,7 +467,7 @@ /* PINCTRL - additions to nodes defined in sc7180.dtsi */ &pm6150l_gpio { - disp_pins: disp-pins { + disp_pins: disp-state { pinconf { pins = "gpio3"; function = PMIC_GPIO_FUNC_FUNC1; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 0c1e8160910f..a731163857ea 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -444,7 +444,7 @@ }; &pm7325_gpios { - key_vol_up_default: key-vol-up-default { + key_vol_up_default: key-vol-up-state { pins = "gpio6"; function = "normal"; input-enable; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 903785d2512d..4c25ffc39535 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -523,7 +523,7 @@ mos_bt_uart: &uart7 { */ &pm8350c_gpios { - pmic_edp_bl_en: pmic-edp-bl-en { + pmic_edp_bl_en: pmic-edp-bl-en-state { pins = "gpio7"; function = "normal"; bias-disable; @@ -533,7 +533,7 @@ mos_bt_uart: &uart7 { output-low; }; - pmic_edp_bl_pwm: pmic-edp-bl-pwm { + pmic_edp_bl_pwm: pmic-edp-bl-pwm-state { pins = "gpio8"; function = "func1"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 77849e2fb02e..ea7fcf5b65c6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -569,7 +569,7 @@ "OPTION2", "PM845_SLB"; - cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en { + cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state { pins = "gpio12"; function = "normal"; @@ -578,7 +578,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; }; - cam0_avdd_2v8_en_default: cam0-avdd-2v8-en { + cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state { pins = "gpio10"; function = "normal"; @@ -587,7 +587,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; }; - vol_up_pin_a: vol-up-active { + vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; input-enable; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 07b729f9fec5..c9d05e94040c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -440,7 +440,7 @@ }; &pm8998_gpio { - volume_down_gpio: pm8998_gpio5 { + volume_down_gpio: pm8998-gpio5-state { pinconf { pins = "gpio5"; function = "normal"; @@ -450,7 +450,7 @@ }; }; - volume_up_gpio: pm8998_gpio6 { + volume_up_gpio: pm8998-gpio6-state { pinconf { pins = "gpio6"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 103cc40816fd..100702883987 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -508,7 +508,7 @@ }; &pm8998_gpio { - volume_up_gpio: pm8998_gpio6 { + volume_up_gpio: pm8998-gpio6-state { pinconf { pins = "gpio6"; function = "normal"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index d88dc07205f7..b5a6cdccec67 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -306,7 +306,7 @@ }; &pm8998_gpio { - vol_up_pin_a: vol-up-active { + vol_up_pin_a: vol-up-active-state { pins = "gpio6"; function = "normal"; input-enable; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index 61925216f5e3..14cc2c87a96b 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -339,7 +339,7 @@ }; &pm6350_gpios { - gpio_keys_pin: gpio-keys-pin { + gpio_keys_pin: gpio-keys-state { pins = "gpio2"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; |