diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-03 16:56:03 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-03 16:56:03 -0700 |
commit | ae45d84fc36d01dcb1007f4298871eec37907904 (patch) | |
tree | 718d3c1ae88d675af01af6c701e93c34361a0371 /arch/arm64/boot/dts/qcom | |
parent | 2219b0ceefe835b92a8a74a73fe964aa052742a2 (diff) | |
parent | c17c7cc775b31ab54e8cba05f9e7b16fd32dd84f (diff) | |
download | linux-ae45d84fc36d01dcb1007f4298871eec37907904.tar.bz2 |
Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
Diffstat (limited to 'arch/arm64/boot/dts/qcom')
126 files changed, 12469 insertions, 2612 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 70516508be56..6b816eb33309 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb @@ -33,12 +34,18 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-keyaki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-gemini.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-fxtec-pro1.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-cheeseburger.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-dumpling.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-lilac.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb @@ -48,6 +55,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb @@ -66,6 +75,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb @@ -84,6 +94,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index f3c0dbfd0a23..a5320d6d30e7 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -5,9 +5,839 @@ /dts-v1/; -#include "apq8016-sbc.dtsi" +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> +#include <dt-bindings/sound/apq8016-lpass.h> / { model = "Qualcomm Technologies, Inc. APQ 8016 SBC"; compatible = "qcom,apq8016-sbc", "qcom,apq8016"; + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp1_uart1; + usid0 = &pm8916_0; + i2c0 = &blsp_i2c2; + i2c1 = &blsp_i2c6; + i2c3 = &blsp_i2c4; + spi0 = &blsp_spi5; + spi1 = &blsp_spi3; + }; + + chosen { + stdout-path = "serial0"; + }; + + camera_vdddo_1v8: camera-vdddo-1v8 { + compatible = "regulator-fixed"; + regulator-name = "camera_vdddo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + camera_vdda_2v8: camera-vdda-2v8 { + compatible = "regulator-fixed"; + regulator-name = "camera_vdda"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + camera_vddd_1v5: camera-vddd-1v5 { + compatible = "regulator-fixed"; + regulator-name = "camera_vddd"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reserved-memory { + ramoops@bff00000 { + compatible = "ramoops"; + reg = <0x0 0xbff00000 0x0 0x100000>; + + record-size = <0x20000>; + console-size = <0x20000>; + ftrace-size = <0x20000>; + }; + }; + + usb2513 { + compatible = "smsc,usb3503"; + reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&msm_key_volp_n_default>; + + button@0 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&msmgpio_leds>, + <&pm8916_gpios_leds>, + <&pm8916_mpps_leds>; + + compatible = "gpio-leds"; + + led@1 { + label = "apq8016-sbc:green:user1"; + gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@2 { + label = "apq8016-sbc:green:user2"; + gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@3 { + label = "apq8016-sbc:green:user3"; + gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led@4 { + label = "apq8016-sbc:green:user4"; + gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + panic-indicator; + default-state = "off"; + }; + + led@5 { + label = "apq8016-sbc:yellow:wlan"; + gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led@6 { + label = "apq8016-sbc:blue:bt"; + gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp_i2c2 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C0"; +}; + +&blsp_i2c4 { + /* On High speed expansion */ + status = "okay"; + label = "HS-I2C2"; + + adv_bridge: bridge@39 { + status = "okay"; + + compatible = "adi,adv7533"; + reg = <0x39>; + + interrupt-parent = <&msmgpio>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + + adi,dsi-lanes = <4>; + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; + + pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + + avdd-supply = <&pm8916_l6>; + v1p2-supply = <&pm8916_l6>; + v3p3-supply = <&pm8916_l17>; + + pinctrl-names = "default","sleep"; + pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; + pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&blsp_i2c6 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C1"; +}; + +&blsp_spi3 { + /* On High speed expansion */ + status = "okay"; + label = "HS-SPI1"; +}; + +&blsp_spi5 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-SPI0"; +}; + +&blsp1_uart1 { + status = "okay"; + label = "LS-UART0"; +}; + +&blsp1_uart2 { + status = "okay"; + label = "LS-UART1"; +}; + +&camss { + status = "okay"; + ports { + port@0 { + reg = <0>; + csiphy0_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&ov5640_ep>; + status = "okay"; + }; + }; + }; +}; + +&cci { + status = "okay"; +}; + +&cci_i2c0 { + camera_rear@3b { + compatible = "ovti,ov5640"; + reg = <0x3b>; + + enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; + reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&camera_rear_default>; + + clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; + clock-names = "xclk"; + clock-frequency = <23880000>; + + vdddo-supply = <&camera_vdddo_1v8>; + vdda-supply = <&camera_vdda_2v8>; + vddd-supply = <&camera_vddd_1v5>; + + /* No camera mezzanine by default */ + status = "disabled"; + + port { + ov5640_ep: endpoint { + clock-lanes = <1>; + data-lanes = <0 2>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&adv7533_in>; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mpss { + status = "okay"; + + firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pronto { + status = "okay"; + + firmware-name = "qcom/apq8016/wcnss.mbn"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + +&sound { + status = "okay"; + + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-names = "default", "sleep"; + qcom,model = "DB410c"; + qcom,audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + external-dai-link@0 { + link-name = "ADV7533"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; + + internal-codec-playback-dai-link@0 { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + internal-codec-capture-dai-link@0 { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; + + pinctrl-names = "default", "device"; + pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; + pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcd_codec { + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; +}; + +&wcnss_ctrl { + firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; +}; + +/* Enable CoreSight */ +&cti0 { status = "okay"; }; +&cti1 { status = "okay"; }; +&cti12 { status = "okay"; }; +&cti13 { status = "okay"; }; +&cti14 { status = "okay"; }; +&cti15 { status = "okay"; }; +&debug0 { status = "okay"; }; +&debug1 { status = "okay"; }; +&debug2 { status = "okay"; }; +&debug3 { status = "okay"; }; +&etf { status = "okay"; }; +&etm0 { status = "okay"; }; +&etm1 { status = "okay"; }; +&etm2 { status = "okay"; }; +&etm3 { status = "okay"; }; +&etr { status = "okay"; }; +&funnel0 { status = "okay"; }; +&funnel1 { status = "okay"; }; +&replicator { status = "okay"; }; +&stm { status = "okay"; }; +&tpiu { status = "okay"; }; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1562000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l1 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1525000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l5 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l8 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l9 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l10 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l11 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l13 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l14 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + l15 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + regulator-always-on; + }; + + l16 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l17 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l18 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; +}; + +/* + * 2mA drive strength is not enough when connecting multiple + * I2C devices with different pull up resistors. + */ +&i2c2_default { + drive-strength = <16>; +}; + +&i2c4_default { + drive-strength = <16>; +}; + +&i2c6_default { + drive-strength = <16>; +}; + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "DragonBoard410c" + * dated monday, august 31, 2015. Page 5 in particular. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + +&msmgpio { + gpio-line-names = + "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ + "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ + "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ + "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ + "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ + "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ + "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ + "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ + "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ + "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ + "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ + "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ + "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ + "[I2C3_SDA]", /* HSEC pin 38 */ + "[I2C3_SCL]", /* HSEC pin 36 */ + "[SPI0_MOSI]", /* LSEC pin 14 */ + "[SPI0_MISO]", /* LSEC pin 10 */ + "[SPI0_CS_N]", /* LSEC pin 12 */ + "[SPI0_CLK]", /* LSEC pin 8 */ + "HDMI_HPD_N", /* GPIO 20 */ + "USR_LED_1_CTRL", + "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ + "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ + "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ + "[CSI0_MCLK]", /* HSEC pin 15 */ + "[CSI1_MCLK]", /* HSEC pin 17 */ + "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ + "[I2C2_SDA]", /* HSEC pin 34 */ + "[I2C2_SCL]", /* HSEC pin 32 */ + "DSI2HDMI_INT_N", + "DSI_SW_SEL_APQ", + "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ + "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ + "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ + "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ + "FORCED_USB_BOOT", + "SD_CARD_DET_N", + "[WCSS_BT_SSBI]", + "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ + "[WCSS_WLAN_DATA_1]", + "[WCSS_WLAN_DATA_0]", + "[WCSS_WLAN_SET]", + "[WCSS_WLAN_CLK]", + "[WCSS_FM_SSBI]", + "[WCSS_FM_SDI]", + "[WCSS_BT_DAT_CTL]", + "[WCSS_BT_DAT_STB]", + "NC", + "NC", /* GPIO 50 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 60 */ + "NC", + "NC", + "[CDC_PDM0_CLK]", + "[CDC_PDM0_SYNC]", + "[CDC_PDM0_TX0]", + "[CDC_PDM0_RX0]", + "[CDC_PDM0_RX1]", + "[CDC_PDM0_RX2]", + "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ + "NC", /* GPIO 70 */ + "NC", + "NC", + "NC", + "NC", /* GPIO 74 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "BOOT_CONFIG_0", /* GPIO 80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "BOOT_CONFIG_5", + "NC", + "NC", + "NC", + "NC", /* GPIO 90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 100 */ + "NC", + "NC", + "NC", + "SSBI_GPS", + "NC", + "NC", + "KEY_VOLP_N", + "NC", + "NC", + "[LS_EXP_MI2S_WS]", /* GPIO 110 */ + "NC", + "NC", + "[LS_EXP_MI2S_SCK]", + "[LS_EXP_MI2S_DATA0]", + "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ + "NC", + "[DSI2HDMI_MI2S_WS]", + "[DSI2HDMI_MI2S_SCK]", + "[DSI2HDMI_MI2S_DATA0]", + "USR_LED_2_CTRL", /* GPIO 120 */ + "SB_HS_ID"; + + msmgpio_leds: msmgpio-leds { + pins = "gpio21", "gpio120"; + function = "gpio"; + + output-low; + }; + + usb_id_default: usb-id-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <8>; + input-enable; + bias-pull-up; + }; + + adv7533_int_active: adv533-int-active { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + adv7533_int_suspend: adv7533-int-suspend { + pins = "gpio31"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + adv7533_switch_active: adv7533-switch-active { + pins = "gpio32"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + adv7533_switch_suspend: adv7533-switch-suspend { + pins = "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + msm_key_volp_n_default: msm-key-volp-n-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <8>; + input-enable; + bias-pull-up; + }; +}; + +&pm8916_gpios { + gpio-line-names = + "USR_LED_3_CTRL", + "USR_LED_4_CTRL", + "USB_HUB_RESET_N_PM", + "USB_SW_SEL_PM"; + + usb_hub_reset_pm: usb-hub-reset-pm { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + input-disable; + output-high; + }; + + usb_hub_reset_pm_device: usb-hub-reset-pm-device { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; + }; + + usb_sw_sel_pm: usb-sw-sel-pm { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-high; + }; + + usb_sw_sel_pm_device: usb-sw-sel-pm-device { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-low; + }; + + pm8916_gpios_leds: pm8916-gpios-leds { + pins = "gpio1", "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; + }; +}; + +&pm8916_mpps { + gpio-line-names = + "VDD_PX_BIAS", + "WLAN_LED_CTRL", + "BT_LED_CTRL", + "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f>; + + ls_exp_gpio_f: pm8916-mpp4-state { + pins = "mpp4"; + function = "digital"; + + output-low; + power-source = <PM8916_MPP_L5>; // 1.8V + }; + + pm8916_mpps_leds: pm8916-mpps-state { + pins = "mpp2", "mpp3"; + function = "digital"; + + output-low; + }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi deleted file mode 100644 index f8d8f3e3664e..000000000000 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ /dev/null @@ -1,826 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2015, The Linux Foundation. All rights reserved. - */ - -#include "msm8916-pm8916.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> -#include <dt-bindings/sound/apq8016-lpass.h> - -/ { - aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp1_uart1; - usid0 = &pm8916_0; - i2c0 = &blsp_i2c2; - i2c1 = &blsp_i2c6; - i2c3 = &blsp_i2c4; - spi0 = &blsp_spi5; - spi1 = &blsp_spi3; - }; - - chosen { - stdout-path = "serial0"; - }; - - camera_vdddo_1v8: camera-vdddo-1v8 { - compatible = "regulator-fixed"; - regulator-name = "camera_vdddo"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - camera_vdda_2v8: camera-vdda-2v8 { - compatible = "regulator-fixed"; - regulator-name = "camera_vdda"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - camera_vddd_1v5: camera-vddd-1v5 { - compatible = "regulator-fixed"; - regulator-name = "camera_vddd"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - - reserved-memory { - ramoops@bff00000 { - compatible = "ramoops"; - reg = <0x0 0xbff00000 0x0 0x100000>; - - record-size = <0x20000>; - console-size = <0x20000>; - ftrace-size = <0x20000>; - }; - }; - - usb2513 { - compatible = "smsc,usb3503"; - reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; - initial-mode = <1>; - }; - - usb_id: usb-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb_id_default>; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&adv7533_out>; - }; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&msm_key_volp_n_default>; - - button@0 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&msmgpio_leds>, - <&pm8916_gpios_leds>, - <&pm8916_mpps_leds>; - - compatible = "gpio-leds"; - - led@1 { - label = "apq8016-sbc:green:user1"; - gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led@2 { - label = "apq8016-sbc:green:user2"; - gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - led@3 { - label = "apq8016-sbc:green:user3"; - gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - default-state = "off"; - }; - - led@4 { - label = "apq8016-sbc:green:user4"; - gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; - panic-indicator; - default-state = "off"; - }; - - led@5 { - label = "apq8016-sbc:yellow:wlan"; - gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - led@6 { - label = "apq8016-sbc:blue:bt"; - gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bluetooth-power"; - default-state = "off"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp_i2c2 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-I2C0"; -}; - -&blsp_i2c4 { - /* On High speed expansion */ - status = "okay"; - label = "HS-I2C2"; - - adv_bridge: bridge@39 { - status = "okay"; - - compatible = "adi,adv7533"; - reg = <0x39>; - - interrupt-parent = <&msmgpio>; - interrupts = <31 IRQ_TYPE_EDGE_FALLING>; - - adi,dsi-lanes = <4>; - clocks = <&rpmcc RPM_SMD_BB_CLK2>; - clock-names = "cec"; - - pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; - - avdd-supply = <&pm8916_l6>; - v1p2-supply = <&pm8916_l6>; - v3p3-supply = <&pm8916_l17>; - - pinctrl-names = "default","sleep"; - pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; - pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; - #sound-dai-cells = <1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7533_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - adv7533_out: endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; -}; - -&blsp_i2c6 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-I2C1"; -}; - -&blsp_spi3 { - /* On High speed expansion */ - status = "okay"; - label = "HS-SPI1"; -}; - -&blsp_spi5 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-SPI0"; -}; - -&blsp1_uart1 { - status = "okay"; - label = "LS-UART0"; -}; - -&blsp1_uart2 { - status = "okay"; - label = "LS-UART1"; -}; - -&camss { - status = "okay"; - ports { - port@0 { - reg = <0>; - csiphy0_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0 2>; - remote-endpoint = <&ov5640_ep>; - status = "okay"; - }; - }; - }; -}; - -&cci { - status = "okay"; -}; - -&cci_i2c0 { - camera_rear@3b { - compatible = "ovti,ov5640"; - reg = <0x3b>; - - enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>; - reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&camera_rear_default>; - - clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; - clock-names = "xclk"; - clock-frequency = <23880000>; - - vdddo-supply = <&camera_vdddo_1v8>; - vdda-supply = <&camera_vdda_2v8>; - vddd-supply = <&camera_vddd_1v5>; - - /* No camera mezzanine by default */ - status = "disabled"; - - port { - ov5640_ep: endpoint { - clock-lanes = <1>; - data-lanes = <0 2>; - remote-endpoint = <&csiphy0_ep>; - }; - }; - }; -}; - -&dsi0_out { - data-lanes = <0 1 2 3>; - remote-endpoint = <&adv7533_in>; -}; - -&lpass { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&pm8916_resin { - status = "okay"; - linux,code = <KEY_VOLUMEDOWN>; -}; - -&pronto { - status = "okay"; -}; - -&sdhc_1 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; -}; - -&sound { - status = "okay"; - - pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; - pinctrl-names = "default", "sleep"; - qcom,model = "DB410c"; - qcom,audio-routing = - "AMIC2", "MIC BIAS Internal2", - "AMIC3", "MIC BIAS External1"; - - external-dai-link@0 { - link-name = "ADV7533"; - cpu { - sound-dai = <&lpass MI2S_QUATERNARY>; - }; - codec { - sound-dai = <&adv_bridge 0>; - }; - }; - - internal-codec-playback-dai-link@0 { - link-name = "WCD"; - cpu { - sound-dai = <&lpass MI2S_PRIMARY>; - }; - codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; - }; - }; - - internal-codec-capture-dai-link@0 { - link-name = "WCD-Capture"; - cpu { - sound-dai = <&lpass MI2S_TERTIARY>; - }; - codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; - }; - }; -}; - -&usb { - status = "okay"; - extcon = <&usb_id>, <&usb_id>; - - pinctrl-names = "default", "device"; - pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; - pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; -}; - -&usb_hs_phy { - extcon = <&usb_id>; -}; - -&wcd_codec { - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; -}; - -/* Enable CoreSight */ -&cti0 { status = "okay"; }; -&cti1 { status = "okay"; }; -&cti12 { status = "okay"; }; -&cti13 { status = "okay"; }; -&cti14 { status = "okay"; }; -&cti15 { status = "okay"; }; -&debug0 { status = "okay"; }; -&debug1 { status = "okay"; }; -&debug2 { status = "okay"; }; -&debug3 { status = "okay"; }; -&etf { status = "okay"; }; -&etm0 { status = "okay"; }; -&etm1 { status = "okay"; }; -&etm2 { status = "okay"; }; -&etm3 { status = "okay"; }; -&etr { status = "okay"; }; -&funnel0 { status = "okay"; }; -&funnel1 { status = "okay"; }; -&replicator { status = "okay"; }; -&stm { status = "okay"; }; -&tpiu { status = "okay"; }; - -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1562000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1525000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l5 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l8 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l9 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l10 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l11 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - l12 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l13 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l14 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - l15 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - regulator-always-on; - }; - - l16 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; - - l17 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l18 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; - }; -}; - -/* - * 2mA drive strength is not enough when connecting multiple - * I2C devices with different pull up resistors. - */ -&i2c2_default { - drive-strength = <16>; -}; - -&i2c4_default { - drive-strength = <16>; -}; - -&i2c6_default { - drive-strength = <16>; -}; - -/* - * GPIO name legend: proper name = the GPIO line is used as GPIO - * NC = not connected (pin out but not routed from the chip to - * anything the board) - * "[PER]" = pin is muxed for [peripheral] (not GPIO) - * LSEC = Low Speed External Connector - * HSEC = High Speed External Connector - * - * Line names are taken from the schematic "DragonBoard410c" - * dated monday, august 31, 2015. Page 5 in particular. - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART3. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ - -&msmgpio { - gpio-line-names = - "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ - "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ - "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ - "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ - "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ - "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ - "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ - "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ - "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ - "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ - "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ - "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ - "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ - "[I2C3_SDA]", /* HSEC pin 38 */ - "[I2C3_SCL]", /* HSEC pin 36 */ - "[SPI0_MOSI]", /* LSEC pin 14 */ - "[SPI0_MISO]", /* LSEC pin 10 */ - "[SPI0_CS_N]", /* LSEC pin 12 */ - "[SPI0_CLK]", /* LSEC pin 8 */ - "HDMI_HPD_N", /* GPIO 20 */ - "USR_LED_1_CTRL", - "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ - "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ - "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ - "[CSI0_MCLK]", /* HSEC pin 15 */ - "[CSI1_MCLK]", /* HSEC pin 17 */ - "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ - "[I2C2_SDA]", /* HSEC pin 34 */ - "[I2C2_SCL]", /* HSEC pin 32 */ - "DSI2HDMI_INT_N", - "DSI_SW_SEL_APQ", - "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ - "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ - "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ - "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ - "FORCED_USB_BOOT", - "SD_CARD_DET_N", - "[WCSS_BT_SSBI]", - "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ - "[WCSS_WLAN_DATA_1]", - "[WCSS_WLAN_DATA_0]", - "[WCSS_WLAN_SET]", - "[WCSS_WLAN_CLK]", - "[WCSS_FM_SSBI]", - "[WCSS_FM_SDI]", - "[WCSS_BT_DAT_CTL]", - "[WCSS_BT_DAT_STB]", - "NC", - "NC", /* GPIO 50 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", /* GPIO 60 */ - "NC", - "NC", - "[CDC_PDM0_CLK]", - "[CDC_PDM0_SYNC]", - "[CDC_PDM0_TX0]", - "[CDC_PDM0_RX0]", - "[CDC_PDM0_RX1]", - "[CDC_PDM0_RX2]", - "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ - "NC", /* GPIO 70 */ - "NC", - "NC", - "NC", - "NC", /* GPIO 74 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "BOOT_CONFIG_0", /* GPIO 80 */ - "BOOT_CONFIG_1", - "BOOT_CONFIG_2", - "BOOT_CONFIG_3", - "NC", - "NC", - "BOOT_CONFIG_5", - "NC", - "NC", - "NC", - "NC", /* GPIO 90 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", /* GPIO 100 */ - "NC", - "NC", - "NC", - "SSBI_GPS", - "NC", - "NC", - "KEY_VOLP_N", - "NC", - "NC", - "[LS_EXP_MI2S_WS]", /* GPIO 110 */ - "NC", - "NC", - "[LS_EXP_MI2S_SCK]", - "[LS_EXP_MI2S_DATA0]", - "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ - "NC", - "[DSI2HDMI_MI2S_WS]", - "[DSI2HDMI_MI2S_SCK]", - "[DSI2HDMI_MI2S_DATA0]", - "USR_LED_2_CTRL", /* GPIO 120 */ - "SB_HS_ID"; - - msmgpio_leds: msmgpio-leds { - pins = "gpio21", "gpio120"; - function = "gpio"; - - output-low; - }; - - usb_id_default: usb-id-default { - pins = "gpio121"; - function = "gpio"; - - drive-strength = <8>; - input-enable; - bias-pull-up; - }; - - adv7533_int_active: adv533-int-active { - pins = "gpio31"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - adv7533_int_suspend: adv7533-int-suspend { - pins = "gpio31"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - adv7533_switch_active: adv7533-switch-active { - pins = "gpio32"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - adv7533_switch_suspend: adv7533-switch-suspend { - pins = "gpio32"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - msm_key_volp_n_default: msm-key-volp-n-default { - pins = "gpio107"; - function = "gpio"; - - drive-strength = <8>; - input-enable; - bias-pull-up; - }; -}; - -&pm8916_gpios { - gpio-line-names = - "USR_LED_3_CTRL", - "USR_LED_4_CTRL", - "USB_HUB_RESET_N_PM", - "USB_SW_SEL_PM"; - - usb_hub_reset_pm: usb-hub-reset-pm { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - - input-disable; - output-high; - }; - - usb_hub_reset_pm_device: usb-hub-reset-pm-device { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - - output-low; - }; - - usb_sw_sel_pm: usb-sw-sel-pm { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - - power-source = <PM8916_GPIO_VPH>; - input-disable; - output-high; - }; - - usb_sw_sel_pm_device: usb-sw-sel-pm-device { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - - power-source = <PM8916_GPIO_VPH>; - input-disable; - output-low; - }; - - pm8916_gpios_leds: pm8916-gpios-leds { - pins = "gpio1", "gpio2"; - function = PMIC_GPIO_FUNC_NORMAL; - - output-low; - }; -}; - -&pm8916_mpps { - gpio-line-names = - "VDD_PX_BIAS", - "WLAN_LED_CTRL", - "BT_LED_CTRL", - "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ - - pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f>; - - ls_exp_gpio_f: pm8916-mpp4 { - pins = "mpp4"; - function = "digital"; - - output-low; - power-source = <PM8916_MPP_L5>; // 1.8V - }; - - pm8916_mpps_leds: pm8916-mpps-leds { - pins = "mpp2", "mpp3"; - function = "digital"; - - output-low; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts index a8dffc8c64ea..314d2dc4726a 100644 --- a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts +++ b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts @@ -11,6 +11,7 @@ / { model = "Sony Xperia Z4 Tablet (Wi-Fi)"; compatible = "sony,karin_windy", "qcom,apq8094"; + chassis-type = "tablet"; /* * This model uses the APQ variant of MSM8994 (APQ8094). diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 757afa27424d..d01a512634cf 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -5,9 +5,1077 @@ /dts-v1/; -#include "apq8096-db820c.dtsi" +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> + +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * P HSEC = Primary High Speed External Connector + * S HSEC = Secondary High Speed External Connector + * J14 = Camera Connector + * TP = Test Points + * + * Line names are taken from the schematic "DragonBoard 820c", + * drawing no: LM25-P2751-1 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ / { model = "Qualcomm Technologies, Inc. DB820c"; compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096"; + + aliases { + serial0 = &blsp2_uart2; + serial1 = &blsp2_uart3; + serial2 = &blsp1_uart2; + i2c0 = &blsp1_i2c3; + i2c1 = &blsp2_i2c1; + i2c2 = &blsp2_i2c1; + spi0 = &blsp1_spi1; + spi1 = &blsp2_spi6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + compatible = "simple-bus"; + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; + + button@0 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; + + usb2_id: usb2-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_det_gpio>; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_det_gpio>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + wlan_en: wlan-en-1-8v { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_gpios>; + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c3 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&blsp1_spi1 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&blsp1_uart2 { + label = "BT-UART"; + status = "okay"; + + bluetooth { + compatible = "qcom,qca6174-bt"; + + /* bt_disable_n gpio */ + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + + clocks = <&divclk4>; + }; +}; + +&adsp_pil { + status = "okay"; +}; + +&blsp2_i2c1 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; +}; + +&blsp2_i2c1 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&blsp2_spi6 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&blsp2_uart2 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_2pins_default>; + pinctrl-1 = <&blsp2_uart2_2pins_sleep>; +}; + +&blsp2_uart3 { + label = "LS-UART0"; + status = "disabled"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart3_4pins_default>; + pinctrl-1 = <&blsp2_uart3_4pins_sleep>; +}; + +&camss { + vdda-supply = <&vreg_l2a_1p25>; +}; + +&gpu { + status = "okay"; +}; + +&hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; +}; + +&hdmi_phy { + status = "okay"; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + #phy-cells = <0>; +}; + +&hsusb_phy1 { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&hsusb_phy2 { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&pm8994_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&tlmm { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ + + sdc2_cd_on: sdc2_cd_on { + mux { + pins = "gpio38"; + function = "gpio"; + }; + + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + }; + + sdc2_cd_off: sdc2_cd_off { + mux { + pins = "gpio38"; + function = "gpio"; + }; + + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + hdmi_hpd_active: hdmi_hpd_active { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <16>; + }; + }; + + hdmi_hpd_suspend: hdmi_hpd_suspend { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; + + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <2>; + }; + }; + + hdmi_ddc_active: hdmi_ddc_active { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + hdmi_ddc_suspend: hdmi_ddc_suspend { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie1 { + status = "okay"; + perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie2 { + status = "okay"; + perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; + + ls_exp_gpio_f: pm8994_gpio5 { + pinconf { + pins = "gpio5"; + output-low; + power-source = <2>; // PM8994_GPIO_S4, 1.8V + }; + }; + + bt_en_gpios: bt_en_gpios { + pinconf { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; // 1.8V + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + }; + + wlan_en_gpios: wlan_en_gpios { + pinconf { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; // 1.8V + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + }; + + audio_mclk: clk_div1 { + pinconf { + pins = "gpio15"; + function = "func1"; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; + + volume_up_gpio: pm8996_gpio2 { + pinconf { + pins = "gpio2"; + function = "normal"; + input-enable; + drive-push-pull; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; + + divclk4_pin_a: divclk4 { + pinconf { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + + bias-disable; + power-source = <PM8994_GPIO_S4>; + }; + }; + + usb3_vbus_det_gpio: pm8996_gpio22 { + pinconf { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; +}; + +&pm8994_mpps { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + s11 { + qcom,saw-leader; + regulator-always-on; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; + + usb2_vbus_det_gpio: pmi8996_gpio6 { + pinconf { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2@1700 { + reg = <0x1700 0x100>; + regulator-name = "VDD_GFX"; + regulator-min-microvolt = <980000>; + regulator-max-microvolt = <980000>; + }; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_1p0: s7 { + regulator-name = "vreg_s7a_1p0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l18a_2p85: l18 { + regulator-name = "vreg_l18a_2p85"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + vreg_l19a_2p8: l19 { + regulator-name = "vreg_l19a_2p8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l26a_0p8: l27 { + regulator-name = "vreg_l26a_0p8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-name = "vreg_lvs1a_1p8"; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-name = "vreg_lvs2a_1p8"; + }; + }; + + pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vph_pwr_bbyp: boost-bypass { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + }; +}; + +&sdhc2 { + /* External SD card */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "DB820c"; + audio-routing = "RX_BIAS", "MCLK", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI"; + cpu { + sound-dai = <&q6afedai HDMI_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&hdmi 0>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vddp-ref-clk-supply = <&vreg_l25a_1p2>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&usb2 { + status = "okay"; + extcon = <&usb2_id>; + + dwc3@7600000 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; + }; +}; + +&usb3 { + status = "okay"; + extcon = <&usb3_id>; + + dwc3@6a00000 { + extcon = <&usb3_id>; + dr_mode = "otg"; + }; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + +}; + +&venus { + status = "okay"; +}; + +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi deleted file mode 100644 index 51e17094d7b1..000000000000 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ /dev/null @@ -1,1105 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. - */ - -#include "msm8996.dtsi" -#include "pm8994.dtsi" -#include "pmi8994.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/sound/qcom,q6afe.h> -#include <dt-bindings/sound/qcom,q6asm.h> - -/* - * GPIO name legend: proper name = the GPIO line is used as GPIO - * NC = not connected (pin out but not routed from the chip to - * anything the board) - * "[PER]" = pin is muxed for [peripheral] (not GPIO) - * LSEC = Low Speed External Connector - * P HSEC = Primary High Speed External Connector - * S HSEC = Secondary High Speed External Connector - * J14 = Camera Connector - * TP = Test Points - * - * Line names are taken from the schematic "DragonBoard 820c", - * drawing no: LM25-P2751-1 - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART3. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ - -/ { - aliases { - serial0 = &blsp2_uart2; - serial1 = &blsp2_uart3; - serial2 = &blsp1_uart2; - i2c0 = &blsp1_i2c3; - i2c1 = &blsp2_i2c1; - i2c2 = &blsp2_i2c1; - spi0 = &blsp1_spi1; - spi1 = &blsp2_spi6; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - clocks { - compatible = "simple-bus"; - divclk4: divclk4 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "divclk4"; - - pinctrl-names = "default"; - pinctrl-0 = <&divclk4_pin_a>; - }; - - div1_mclk: divclk1 { - compatible = "gpio-gate-clock"; - pinctrl-0 = <&audio_mclk>; - pinctrl-names = "default"; - clocks = <&rpmcc RPM_SMD_DIV_CLK1>; - #clock-cells = <0>; - enable-gpios = <&pm8994_gpios 15 0>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&volume_up_gpio>; - - button@0 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; - }; - }; - - usb2_id: usb2-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_det_gpio>; - }; - - usb3_id: usb3-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_det_gpio>; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-always-on; - regulator-boot-on; - - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - - wlan_en: wlan-en-1-8v { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_en_gpios>; - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&pm8994_gpios 8 0>; - - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; - }; -}; - -&blsp1_i2c3 { - /* On Low speed expansion */ - label = "LS-I2C0"; - status = "okay"; -}; - -&blsp1_spi1 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; -}; - -&blsp1_uart2 { - label = "BT-UART"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - - bluetooth { - compatible = "qcom,qca6174-bt"; - - /* bt_disable_n gpio */ - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; - - clocks = <&divclk4>; - }; -}; - -&adsp_pil { - status = "okay"; -}; - -&blsp2_i2c1 { - /* On High speed expansion */ - label = "HS-I2C2"; - status = "okay"; -}; - -&blsp2_i2c1 { - /* On Low speed expansion */ - label = "LS-I2C1"; - status = "okay"; -}; - -&blsp2_spi6 { - /* On High speed expansion */ - label = "HS-SPI1"; - status = "okay"; -}; - -&blsp2_uart2 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_2pins_default>; - pinctrl-1 = <&blsp2_uart2_2pins_sleep>; -}; - -&blsp2_uart3 { - label = "LS-UART0"; - status = "disabled"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart3_4pins_default>; - pinctrl-1 = <&blsp2_uart3_4pins_sleep>; -}; - -&camss { - vdda-supply = <&vreg_l2a_1p25>; -}; - -&gpu { - status = "okay"; -}; - -&hdmi { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; - - core-vdda-supply = <&vreg_l12a_1p8>; - core-vcc-supply = <&vreg_s4a_1p8>; -}; - -&hdmi_phy { - status = "okay"; - - vddio-supply = <&vreg_l12a_1p8>; - vcca-supply = <&vreg_l28a_0p925>; - #phy-cells = <0>; -}; - -&hsusb_phy1 { - status = "okay"; - - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&hsusb_phy2 { - status = "okay"; - - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&mdp { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&mmcc { - vdd-gfx-supply = <&vdd_gfx>; -}; - -&pm8994_resin { - status = "okay"; - linux,code = <KEY_VOLUMEDOWN>; -}; - -&tlmm { - gpio-line-names = - "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ - "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ - "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ - "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ - "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ - "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ - "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ - "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ - "TP93", /* GPIO_9 */ - "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ - "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ - "NC", /* GPIO_12 */ - "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ - "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ - "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ - "TP99", /* GPIO_16 */ - "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ - "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ - "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ - "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ - "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ - "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ - "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ - "GPIO-D", /* GPIO_24, LSEC pin 26 */ - "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ - "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ - "BLSP6_I2C_SDA", /* GPIO_27 */ - "BLSP6_I2C_SCL", /* GPIO_28 */ - "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ - "GPIO30", /* GPIO_30, S HSEC pin 4 */ - "HDMI_CEC", /* GPIO_31 */ - "HDMI_DDC_CLOCK", /* GPIO_32 */ - "HDMI_DDC_DATA", /* GPIO_33 */ - "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ - "PCIE0_RST_N", /* GPIO_35 */ - "PCIE0_CLKREQ_N", /* GPIO_36 */ - "PCIE0_WAKE", /* GPIO_37 */ - "SD_CARD_DET_N", /* GPIO_38 */ - "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ - "W_DISABLE_N", /* GPIO_40 */ - "[BLSP9_UART_TX]", /* GPIO_41 */ - "[BLSP9_UART_RX]", /* GPIO_42 */ - "[BLSP2_UART_CTS_N]", /* GPIO_43 */ - "[BLSP2_UART_RFR_N]", /* GPIO_44 */ - "[BLSP3_UART_TX]", /* GPIO_45 */ - "[BLSP3_UART_RX]", /* GPIO_46 */ - "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ - "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ - "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ - "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ - "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ - "[CODEC_INT1_N]", /* GPIO_53 */ - "[CODEC_INT2_N]", /* GPIO_54 */ - "[BLSP7_I2C_SDA]", /* GPIO_55 */ - "[BLSP7_I2C_SCL]", /* GPIO_56 */ - "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ - "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ - "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ - "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ - "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ - "GPIO-E", /* GPIO_62, LSEC pin 27 */ - "TP87", /* GPIO_63 */ - "[CODEC_RST_N]", /* GPIO_64 */ - "[PCM1_CLK]", /* GPIO_65 */ - "[PCM1_SYNC]", /* GPIO_66 */ - "[PCM1_DIN]", /* GPIO_67 */ - "[PCM1_DOUT]", /* GPIO_68 */ - "AUDIO_REF_CLK", /* GPIO_69 */ - "SLIMBUS_CLK", /* GPIO_70 */ - "SLIMBUS_DATA0", /* GPIO_71 */ - "SLIMBUS_DATA1", /* GPIO_72 */ - "NC", /* GPIO_73 */ - "NC", /* GPIO_74 */ - "NC", /* GPIO_75 */ - "NC", /* GPIO_76 */ - "TP94", /* GPIO_77 */ - "NC", /* GPIO_78 */ - "TP95", /* GPIO_79 */ - "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ - "TP88", /* GPIO_81 */ - "TP89", /* GPIO_82 */ - "TP90", /* GPIO_83 */ - "TP91", /* GPIO_84 */ - "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ - "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ - "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ - "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ - "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ - "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ - "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ - "NC", /* GPIO_92 */ - "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ - "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ - "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ - "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ - "NC", /* GPIO_97 */ - "CAM1_STANDBY_N", /* GPIO_98 */ - "NC", /* GPIO_99 */ - "NC", /* GPIO_100 */ - "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ - "BOOT_CONFIG1", /* GPIO_102 */ - "USB_HUB_RESET", /* GPIO_103 */ - "CAM1_RST_N", /* GPIO_104 */ - "NC", /* GPIO_105 */ - "NC", /* GPIO_106 */ - "NC", /* GPIO_107 */ - "NC", /* GPIO_108 */ - "NC", /* GPIO_109 */ - "NC", /* GPIO_110 */ - "NC", /* GPIO_111 */ - "NC", /* GPIO_112 */ - "PMI8994_BUA", /* GPIO_113 */ - "PCIE2_RST_N", /* GPIO_114 */ - "PCIE2_CLKREQ_N", /* GPIO_115 */ - "PCIE2_WAKE", /* GPIO_116 */ - "SSC_IRQ_0", /* GPIO_117 */ - "SSC_IRQ_1", /* GPIO_118 */ - "SSC_IRQ_2", /* GPIO_119 */ - "NC", /* GPIO_120 */ - "GPIO121", /* GPIO_121, S HSEC pin 2 */ - "NC", /* GPIO_122 */ - "SSC_IRQ_6", /* GPIO_123 */ - "SSC_IRQ_7", /* GPIO_124 */ - "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ - "BOOT_CONFIG5", /* GPIO_126 */ - "NC", /* GPIO_127 */ - "NC", /* GPIO_128 */ - "BOOT_CONFIG7", /* GPIO_129 */ - "PCIE1_RST_N", /* GPIO_130 */ - "PCIE1_CLKREQ_N", /* GPIO_131 */ - "PCIE1_WAKE", /* GPIO_132 */ - "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ - "NC", /* GPIO_134 */ - "NC", /* GPIO_135 */ - "BOOT_CONFIG8", /* GPIO_136 */ - "NC", /* GPIO_137 */ - "NC", /* GPIO_138 */ - "GPS_SSBI2", /* GPIO_139 */ - "GPS_SSBI1", /* GPIO_140 */ - "NC", /* GPIO_141 */ - "NC", /* GPIO_142 */ - "NC", /* GPIO_143 */ - "BOOT_CONFIG6", /* GPIO_144 */ - "NC", /* GPIO_145 */ - "NC", /* GPIO_146 */ - "NC", /* GPIO_147 */ - "NC", /* GPIO_148 */ - "NC"; /* GPIO_149 */ - - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; - }; - - blsp1_uart2_default: blsp1_uart2_default { - mux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "blsp_uart2"; - }; - - config { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp1_uart2_sleep: blsp1_uart2_sleep { - mux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "gpio"; - }; - - config { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <2>; - bias-disable; - }; - }; - - hdmi_hpd_active: hdmi_hpd_active { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <16>; - }; - }; - - hdmi_hpd_suspend: hdmi_hpd_suspend { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <2>; - }; - }; - - hdmi_ddc_active: hdmi_ddc_active { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - hdmi_ddc_suspend: hdmi_ddc_suspend { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-down; - }; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&wlan_en>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie1 { - status = "okay"; - perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie2 { - status = "okay"; - perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie_phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; -}; - -&pm8994_gpios { - gpio-line-names = - "NC", - "KEY_VOLP_N", - "NC", - "BL1_PWM", - "GPIO-F", /* BL0_PWM, LSEC pin 28 */ - "BL1_EN", - "NC", - "WLAN_EN", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "DIVCLK1", - "DIVCLK2", - "DIVCLK3", - "DIVCLK4", - "BT_EN", - "PMIC_SLB", - "PMIC_BUA", - "USB_VBUS_DET"; - - pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; - - ls_exp_gpio_f: pm8994_gpio5 { - pinconf { - pins = "gpio5"; - output-low; - power-source = <2>; // PM8994_GPIO_S4, 1.8V - }; - }; - - bt_en_gpios: bt_en_gpios { - pinconf { - pins = "gpio19"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-pull-down; - }; - }; - - wlan_en_gpios: wlan_en_gpios { - pinconf { - pins = "gpio8"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-pull-down; - }; - }; - - audio_mclk: clk_div1 { - pinconf { - pins = "gpio15"; - function = "func1"; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; - - volume_up_gpio: pm8996_gpio2 { - pinconf { - pins = "gpio2"; - function = "normal"; - input-enable; - drive-push-pull; - bias-pull-up; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; - - divclk4_pin_a: divclk4 { - pinconf { - pins = "gpio18"; - function = PMIC_GPIO_FUNC_FUNC2; - - bias-disable; - power-source = <PM8994_GPIO_S4>; - }; - }; - - usb3_vbus_det_gpio: pm8996_gpio22 { - pinconf { - pins = "gpio22"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; -}; - -&pm8994_mpps { - gpio-line-names = - "VDDPX_BIAS", - "WIFI_LED", - "NC", - "BT_LED", - "PM_MPP05", - "PM_MPP06", - "PM_MPP07", - "NC"; -}; - -&pm8994_spmi_regulators { - qcom,saw-reg = <&saw3>; - s9 { - qcom,saw-slave; - }; - s10 { - qcom,saw-slave; - }; - s11 { - qcom,saw-leader; - regulator-always-on; - regulator-min-microvolt = <980000>; - regulator-max-microvolt = <980000>; - }; -}; - -&pmi8994_gpios { - gpio-line-names = - "NC", - "SPKR_AMP_EN1", - "SPKR_AMP_EN2", - "TP61", - "NC", - "USB2_VBUS_DET", - "NC", - "NC", - "NC", - "NC"; - - usb2_vbus_det_gpio: pmi8996_gpio6 { - pinconf { - pins = "gpio6"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; -}; - -&pmi8994_spmi_regulators { - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; - regulator-name = "VDD_GFX"; - regulator-min-microvolt = <980000>; - regulator-max-microvolt = <980000>; - }; -}; - -&rpm_requests { - pm8994-regulators { - compatible = "qcom,rpm-pm8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_s4-supply = <&vph_pwr>; - vdd_s5-supply = <&vph_pwr>; - vdd_s6-supply = <&vph_pwr>; - vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; - vdd_l1-supply = <&vreg_s1b_1p025>; - vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; - vdd_l3_l11-supply = <&vreg_s3a_1p3>; - vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; - vdd_l5_l7-supply = <&vreg_s5a_2p15>; - vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; - vdd_l8_l16_l30-supply = <&vph_pwr>; - vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; - vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; - vdd_l14_l15-supply = <&vreg_s5a_2p15>; - vdd_l17_l29-supply = <&vph_pwr_bbyp>; - vdd_l20_l21-supply = <&vph_pwr_bbyp>; - vdd_l25-supply = <&vreg_s3a_1p3>; - vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; - - vreg_s3a_1p3: s3 { - regulator-name = "vreg_s3a_1p3"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - vreg_s4a_1p8: s4 { - regulator-name = "vreg_s4a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - vreg_s5a_2p15: s5 { - regulator-name = "vreg_s5a_2p15"; - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - vreg_s7a_1p0: s7 { - regulator-name = "vreg_s7a_1p0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - - vreg_l1a_1p0: l1 { - regulator-name = "vreg_l1a_1p0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l2a_1p25: l2 { - regulator-name = "vreg_l2a_1p25"; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - }; - vreg_l3a_0p875: l3 { - regulator-name = "vreg_l3a_0p875"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - }; - vreg_l4a_1p225: l4 { - regulator-name = "vreg_l4a_1p225"; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - vreg_l6a_1p2: l6 { - regulator-name = "vreg_l6a_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l8a_1p8: l8 { - regulator-name = "vreg_l8a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l9a_1p8: l9 { - regulator-name = "vreg_l9a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l10a_1p8: l10 { - regulator-name = "vreg_l10a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l11a_1p15: l11 { - regulator-name = "vreg_l11a_1p15"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - }; - vreg_l12a_1p8: l12 { - regulator-name = "vreg_l12a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l13a_2p95: l13 { - regulator-name = "vreg_l13a_2p95"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - vreg_l14a_1p8: l14 { - regulator-name = "vreg_l14a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l15a_1p8: l15 { - regulator-name = "vreg_l15a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l16a_2p7: l16 { - regulator-name = "vreg_l16a_2p7"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - vreg_l17a_2p8: l17 { - regulator-name = "vreg_l17a_2p8"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - vreg_l18a_2p85: l18 { - regulator-name = "vreg_l18a_2p85"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2900000>; - }; - vreg_l19a_2p8: l19 { - regulator-name = "vreg_l19a_2p8"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - vreg_l20a_2p95: l20 { - regulator-name = "vreg_l20a_2p95"; - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - }; - vreg_l21a_2p95: l21 { - regulator-name = "vreg_l21a_2p95"; - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - vreg_l22a_3p0: l22 { - regulator-name = "vreg_l22a_3p0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - vreg_l23a_2p8: l23 { - regulator-name = "vreg_l23a_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - vreg_l24a_3p075: l24 { - regulator-name = "vreg_l24a_3p075"; - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - vreg_l25a_1p2: l25 { - regulator-name = "vreg_l25a_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-allow-set-load; - }; - vreg_l26a_0p8: l27 { - regulator-name = "vreg_l26a_0p8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l28a_0p925: l28 { - regulator-name = "vreg_l28a_0p925"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <925000>; - regulator-allow-set-load; - }; - vreg_l29a_2p8: l29 { - regulator-name = "vreg_l29a_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - vreg_l30a_1p8: l30 { - regulator-name = "vreg_l30a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l32a_1p8: l32 { - regulator-name = "vreg_l32a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-name = "vreg_lvs1a_1p8"; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-name = "vreg_lvs2a_1p8"; - }; - }; - - pmi8994-regulators { - compatible = "qcom,rpm-pmi8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_bst_byp-supply = <&vph_pwr>; - - vph_pwr_bbyp: boost-bypass { - regulator-name = "vph_pwr_bbyp"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vreg_s1b_1p025: s1 { - regulator-name = "vreg_s1b_1p025"; - regulator-min-microvolt = <1025000>; - regulator-max-microvolt = <1025000>; - }; - }; -}; - -&sdhc2 { - /* External SD card */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; - cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vreg_l13a_2p95>; - status = "okay"; -}; - -&q6asmdai { - dai@0 { - reg = <0>; - }; - - dai@1 { - reg = <1>; - }; - - dai@2 { - reg = <2>; - }; -}; - -&sound { - compatible = "qcom,apq8096-sndcard"; - model = "DB820c"; - audio-routing = "RX_BIAS", "MCLK", - "MM_DL1", "MultiMedia1 Playback", - "MM_DL2", "MultiMedia2 Playback", - "MultiMedia3 Capture", "MM_UL3"; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - mm2-dai-link { - link-name = "MultiMedia2"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; - }; - }; - - mm3-dai-link { - link-name = "MultiMedia3"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; - }; - }; - - hdmi-dai-link { - link-name = "HDMI"; - cpu { - sound-dai = <&q6afedai HDMI_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&hdmi 0>; - }; - }; - - slim-dai-link { - link-name = "SLIM Playback"; - cpu { - sound-dai = <&q6afedai SLIMBUS_6_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9335 6>; - }; - }; - - slimcap-dai-link { - link-name = "SLIM Capture"; - cpu { - sound-dai = <&q6afedai SLIMBUS_0_TX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9335 1>; - }; - }; -}; - -&ufsphy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; -}; - -&ufshc { - status = "okay"; - - vcc-supply = <&vreg_l20a_2p95>; - vccq-supply = <&vreg_l25a_1p2>; - vccq2-supply = <&vreg_s4a_1p8>; - - vcc-max-microamp = <600000>; - vccq-max-microamp = <450000>; - vccq2-max-microamp = <450000>; -}; - -&usb2 { - status = "okay"; - extcon = <&usb2_id>; - - dwc3@7600000 { - extcon = <&usb2_id>; - dr_mode = "otg"; - maximum-speed = "high-speed"; - }; -}; - -&usb3 { - status = "okay"; - extcon = <&usb3_id>; - - dwc3@6a00000 { - extcon = <&usb3_id>; - dr_mode = "otg"; - }; -}; - -&usb3phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; - -}; - -&venus { - status = "okay"; -}; - -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts index a57c60070cdc..567b33106556 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -395,9 +395,6 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - - vdda-phy-max-microamp = <18380>; - vdda-pll-max-microamp = <9440>; }; &venus { diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index d2fe58e0eb7a..933b56103a46 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -200,8 +200,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <1>; - qcom,controlled-remotely = <1>; - qcom,config-pipe-trust-reg = <0>; + qcom,controlled-remotely; }; crypto: crypto@73a000 { @@ -347,9 +346,8 @@ compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07984000 0x0 0x1a000>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_QPIC_CLK>, - <&gcc GCC_QPIC_AHB_CLK>; - clock-names = "iface_clk", "bam_clk"; + clocks = <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; status = "disabled"; @@ -401,7 +399,7 @@ reset-names = "phy", "common"; - pcie_phy0: lane@84200 { + pcie_phy0: phy@84200 { reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */ <0x0 0x84400 0x0 0x200>, /* Serdes Rx */ <0x0 0x84800 0x0 0x4f4>; /* PCS: Lane0, COM, PCIE */ @@ -671,6 +669,89 @@ }; }; + ssphy_0: ssphy@78000 { + compatible = "qcom,ipq6018-qmp-usb3-phy"; + reg = <0x0 0x78000 0x0 0x1C4>; + #address-cells = <2>; + #size-cells = <2>; + #clock-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB0_AUX_CLK>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; + + usb0_ssphy: lane@78200 { + reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ + <0x0 0x00078400 0x0 0x200>, /* Rx */ + <0x0 0x00078800 0x0 0x1F8>, /* PCS */ + <0x0 0x00078600 0x0 0x044>; /* PCS misc */ + #phy-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb0_pipe_clk_src"; + }; + }; + + qusb_phy_0: qusb@79000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x079000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + status = "disabled"; + }; + + usb3: usb3@8A00000 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x8AF8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "sys_noc_axi", + "master", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <133330000>, + <20000000>; + + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + + dwc_0: usb@8A00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x8A00000 0x0 0xcd00>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_0>, <&usb0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,ref-clock-period-ns = <0x32>; + dr_mode = "host"; + }; + }; }; wcss: wcss-smp2p { diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index cc08dc4eb56a..b5e1eaa367bf 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -24,6 +24,8 @@ device_type = "memory"; reg = <0x0 0x40000000 0x0 0x20000000>; }; + + vreg_dummy: regulator-dummy { }; }; &blsp1_i2c2 { @@ -97,10 +99,14 @@ &ssphy_0 { status = "okay"; + vdda-phy-supply = <&vreg_dummy>; + vdda-pll-supply = <&vreg_dummy>; }; &ssphy_1 { status = "okay"; + vdda-phy-supply = <&vreg_dummy>; + vdda-pll-supply = <&vreg_dummy>; }; &usb_0 { diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index db333001df4d..6c6a0f853669 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -91,7 +91,6 @@ ssphy_1: phy@58000 { compatible = "qcom,ipq8074-qmp-usb3-phy"; reg = <0x00058000 0x1c4>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -106,12 +105,13 @@ reset-names = "phy","common"; status = "disabled"; - usb1_ssphy: lane@58200 { + usb1_ssphy: phy@58200 { reg = <0x00058200 0x130>, /* Tx */ <0x00058400 0x200>, /* Rx */ <0x00058800 0x1f8>, /* PCS */ <0x00058600 0x044>; /* PCS misc*/ #phy-cells = <0>; + #clock-cells = <1>; clocks = <&gcc GCC_USB1_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb1_pipe_clk_src"; @@ -134,7 +134,6 @@ ssphy_0: phy@78000 { compatible = "qcom,ipq8074-qmp-usb3-phy"; reg = <0x00078000 0x1c4>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -149,12 +148,13 @@ reset-names = "phy","common"; status = "disabled"; - usb0_ssphy: lane@78200 { + usb0_ssphy: phy@78200 { reg = <0x00078200 0x130>, /* Tx */ <0x00078400 0x200>, /* Rx */ <0x00078800 0x1f8>, /* PCS */ <0x00078600 0x044>; /* PCS misc*/ #phy-cells = <0>; + #clock-cells = <1>; clocks = <&gcc GCC_USB0_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb0_pipe_clk_src"; @@ -174,34 +174,60 @@ status = "disabled"; }; - pcie_phy0: phy@86000 { + pcie_qmp0: phy@86000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; reg = <0x00086000 0x1000>; - #phy-cells = <0>; - clocks = <&gcc GCC_PCIE0_PIPE_CLK>; - clock-names = "pipe_clk"; - clock-output-names = "pcie20_phy0_pipe_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; resets = <&gcc GCC_PCIE0_PHY_BCR>, <&gcc GCC_PCIE0PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; + + pcie_phy0: phy@86200 { + reg = <0x86200 0x16c>, + <0x86400 0x200>, + <0x86800 0x4f4>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "pcie_0_pipe_clk"; + }; }; - pcie_phy1: phy@8e000 { + pcie_qmp1: phy@8e000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; reg = <0x0008e000 0x1000>; - #phy-cells = <0>; - clocks = <&gcc GCC_PCIE1_PIPE_CLK>; - clock-names = "pipe_clk"; - clock-output-names = "pcie20_phy1_pipe_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&gcc GCC_PCIE1_AUX_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; resets = <&gcc GCC_PCIE1_PHY_BCR>, <&gcc GCC_PCIE1PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; + + pcie_phy1: phy@8e200 { + reg = <0x8e200 0x16c>, + <0x8e400 0x200>, + <0x8e800 0x4f4>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "pcie_1_pipe_clk"; + }; }; prng: rng@e3000 { @@ -212,7 +238,7 @@ status = "disabled"; }; - cryptobam: dma@704000 { + cryptobam: dma-controller@704000 { compatible = "qcom,bam-v1.7.0"; reg = <0x00704000 0x20000>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; @@ -220,7 +246,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <1>; - qcom,controlled-remotely = <1>; + qcom,controlled-remotely; status = "disabled"; }; @@ -293,6 +319,25 @@ #reset-cells = <0x1>; }; + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x000700>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + sdhc_1: sdhci@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; @@ -411,6 +456,21 @@ status = "disabled"; }; + blsp1_i2c5: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b9000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + dmas = <&blsp_dma 21>, <&blsp_dma 20>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + blsp1_i2c6: i2c@78ba000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 670bd1bebd73..265e539e7e99 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -9,6 +9,7 @@ / { model = "Alcatel OneTouch Idol 3 (4.7)"; compatible = "alcatel,idol347", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index cee451e59385..d4d33dd3584a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -4,10 +4,13 @@ #include "msm8916-pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Asus Zenfone 2 Laser"; compatible = "asus,z00l", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; @@ -40,6 +43,21 @@ }; }; + reg_sd_vmmc: regulator-sdcard-vmmc { + compatible = "regulator-fixed"; + regulator-name = "sdcard-vmmc"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + + startup-delay-us = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_vmmc_en_default>; + }; + usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>; @@ -48,6 +66,64 @@ }; }; +&blsp_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l8>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + }; + + imu@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <36 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_default>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l11>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_default>; + }; +}; + &blsp1_uart2 { status = "okay"; }; @@ -64,6 +140,16 @@ pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; +&sdhc_2 { + status = "okay"; + vmmc-supply = <®_sd_vmmc>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; @@ -185,6 +271,46 @@ bias-pull-up; }; + imu_default: imu-default { + pins = "gpio36"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio112"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sd_vmmc_en_default: sd-vmmc-en-default { + pins = "gpio87"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + + reset { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + }; + usb_id_default: usb-id-default { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index e0075b574190..42d93d3fba36 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -25,6 +25,7 @@ / { model = "Huawei Ascend G7"; compatible = "huawei,g7", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 1e893c0b6fbc..852de624f5af 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -11,6 +11,7 @@ / { model = "Longcheer L8150"; compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; @@ -30,14 +31,6 @@ }; }; - // FIXME: Use extcon device provided by charger driver when available - usb_vbus: usb-vbus { - compatible = "linux,extcon-usb-gpio"; - vbus-gpio = <&msmgpio 62 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb_vbus_default>; - }; - gpio-keys { compatible = "gpio-keys"; @@ -121,9 +114,21 @@ status = "okay"; accelerometer@10 { - compatible = "bosch,bmc150_accel"; + compatible = "bosch,bmc156_accel"; reg = <0x10>; + /* + * For some reason the interrupt line is usually not connected + * to the BMC156. However, there are two pads next to the chip + * that can be shorted to make it work if needed. + * + * interrupt-parent = <&msmgpio>; + * interrupts = <116 IRQ_TYPE_EDGE_RISING>; + */ + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; @@ -133,9 +138,15 @@ }; magnetometer@12 { - compatible = "bosch,bmc150_magn"; + compatible = "bosch,bmc156_magn"; reg = <0x12>; + interrupt-parent = <&msmgpio>; + interrupts = <113 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&magn_int_default>; + vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; }; @@ -145,7 +156,8 @@ reg = <0x68>; interrupt-parent = <&msmgpio>; - interrupts = <23 IRQ_TYPE_EDGE_RISING>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>, + <22 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&gyro_int_default>; @@ -196,6 +208,10 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_usbin { + status = "okay"; +}; + &pm8916_vib { status = "okay"; }; @@ -225,11 +241,11 @@ &usb { status = "okay"; dr_mode = "peripheral"; - extcon = <&usb_vbus>; + extcon = <&pm8916_usbin>; }; &usb_hs_phy { - extcon = <&usb_vbus>; + extcon = <&pm8916_usbin>; }; &smd_rpm_regulators { @@ -336,6 +352,14 @@ }; &msmgpio { + accel_int_default: accel-int-default { + pins = "gpio116"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + camera_flash_default: camera-flash-default { pins = "gpio31", "gpio32"; function = "gpio"; @@ -361,25 +385,26 @@ }; gyro_int_default: gyro-int-default { - pins = "gpio23"; + pins = "gpio22", "gpio23"; function = "gpio"; drive-strength = <2>; bias-disable; }; - tp_int_default: tp-int-default { - pins = "gpio13"; + magn_int_default: magn-int-default { + pins = "gpio113"; function = "gpio"; drive-strength = <2>; bias-disable; }; - usb_vbus_default: usb-vbus-default { - pins = "gpio62"; + tp_int_default: tp-int-default { + pins = "gpio13"; function = "gpio"; - bias-pull-up; + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index 27845189ac2b..f9ce123471d4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -10,6 +10,7 @@ / { model = "BQ Aquaris X5 (Longcheer L8910)"; compatible = "longcheer,l8910", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts index d66c15538785..7c0ceb3cff45 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -5,9 +5,22 @@ /dts-v1/; -#include "msm8916-mtp.dtsi" +#include "msm8916-pm8916.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8916 MTP"; compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + usid0 = &pm8916_0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart2 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi deleted file mode 100644 index 1bd05046cdeb..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. - */ - -#include "msm8916-pm8916.dtsi" - -/ { - aliases { - serial0 = &blsp1_uart2; - usid0 = &pm8916_0; - }; - - chosen { - stdout-path = "serial0"; - }; -}; - -&blsp1_uart2 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 6cc2eaeb1d33..4ba11b020f9b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -7,6 +7,7 @@ / { model = "Samsung Galaxy A3U (EUR)"; compatible = "samsung,a3u-eur", "qcom,msm8916"; + chassis-type = "handset"; reg_panel_vdd3: regulator-panel-vdd3 { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index c2eff5aebf85..d978c9ac179d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -7,6 +7,7 @@ / { model = "Samsung Galaxy A5U (EUR)"; compatible = "samsung,a5u-eur", "qcom,msm8916"; + chassis-type = "handset"; reg_touch_key: regulator-touch-key { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts new file mode 100644 index 000000000000..a78f87a5bf4f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -0,0 +1,534 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2019 Stephan Gerhold + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/* + * NOTE: The original firmware from Samsung can only boot ARM32 kernels. + * Unfortunately, the firmware is signed and cannot be replaced easily. + * There seems to be no way to boot ARM64 kernels on this device at the moment, + * even though the hardware would support it. + * + * However, it is possible to use this device tree by compiling an ARM32 kernel + * instead. For clarity and build testing this device tree is maintained next + * to the other MSM8916 device trees. However, it is actually used through + * arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts + */ + +/ { + model = "Samsung Galaxy S4 Mini Value Edition"; + compatible = "samsung,serranove", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + home { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + + reg_vdd_tsp: regulator-vdd-tsp { + compatible = "regulator-fixed"; + regulator-name = "vdd_tsp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_en_default>; + }; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_en_default>; + }; + + reg_key_led: regulator-key-led { + compatible = "regulator-fixed"; + regulator-name = "key_led"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_led_en_default>; + }; + + i2c-muic { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + muic: extcon@14 { + compatible = "siliconmitus,sm5504-muic"; + reg = <0x14>; + + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_irq_default>; + }; + }; + + i2c-tkey { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + touchkey@20 { + compatible = "coreriver,tc360-touchkey"; + reg = <0x20>; + + interrupt-parent = <&msmgpio>; + interrupts = <98 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <®_touch_key>; + vdd-supply = <®_key_led>; + vddio-supply = <&pm8916_l6>; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + + pinctrl-names = "default"; + pinctrl-0 = <&tkey_default>; + }; + }; + + i2c-nfc { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_i2c_default>; + + #address-cells = <1>; + #size-cells = <0>; + + nfc@2b { + compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; + reg = <0x2b>; + + interrupt-parent = <&msmgpio>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + imu@6b { + compatible = "st,lsm6ds3"; + reg = <0x6b>; + + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_irq_default>; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_alert_default>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "zinitix,bt541"; + reg = <0x20>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <540>; + touchscreen-size-y = <960>; + + vdd-supply = <®_vdd_tsp>; + vddo-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&tsp_irq_default>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8916_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&pm8916_vib { + status = "okay"; +}; + +&pronto { + status = "okay"; + + iris { + compatible = "qcom,wcn3660b"; + }; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + non-removable; + + /* + * FIXME: Disable UHS-I modes since tuning fails with: + * + * sdhci_msm 7864900.sdhci: mmc1: No tuning point found + * mmc1: tuning execution failed: -5 + * mmc1: error -5 whilst initialising SD card + * + * This is the quirk used on downstream, which suggests this is + * a hardware limitation. However, probing a card using DDR50 works + * (without tuning), so maybe only tuning is broken? + */ + no-1-8-v; +}; + +&usb { + status = "okay"; + extcon = <&muic>, <&muic>; +}; + +&usb_hs_phy { + extcon = <&muic>; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&msmgpio { + fg_alert_default: fg-alert-default { + pins = "gpio121"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default { + pins = "gpio52"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + imu_irq_default: imu-irq-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + muic_i2c_default: muic-i2c-default { + pins = "gpio105", "gpio106"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + muic_irq_default: muic-irq-default { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + nfc_default: nfc-default { + pins = "gpio20", "gpio49"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + + irq { + pins = "gpio21"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + }; + + nfc_i2c_default: nfc-i2c-default { + pins = "gpio0", "gpio1"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_default: tkey-default { + pins = "gpio98"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_en_default: tkey-en-default { + pins = "gpio86"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_i2c_default: tkey-i2c-default { + pins = "gpio16", "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tkey_led_en_default: tkey-led-en-default { + pins = "gpio60"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default: tsp-en-default { + pins = "gpio73"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_irq_default: tsp-irq-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index 4e20cc0008f7..69a44c6f57fc 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -11,6 +11,7 @@ / { model = "Xiaomi Redmi 2 (Wingtech WT88047)"; compatible = "wingtech,wt88047", "qcom,msm8916"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 3f85e34a8ce6..c1c42f26b61e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -41,9 +41,13 @@ no-map; }; - smem_mem: smem_region@86300000 { + smem@86300000 { + compatible = "qcom,smem"; reg = <0x0 0x86300000 0x0 0x100000>; no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; }; hypervisor@86400000 { @@ -124,6 +128,8 @@ #cooling-cells = <2>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; + qcom,acc = <&cpu0_acc>; + qcom,saw = <&cpu0_saw>; }; CPU1: cpu@1 { @@ -137,6 +143,8 @@ #cooling-cells = <2>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; + qcom,acc = <&cpu1_acc>; + qcom,saw = <&cpu1_saw>; }; CPU2: cpu@2 { @@ -150,6 +158,8 @@ #cooling-cells = <2>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; + qcom,acc = <&cpu2_acc>; + qcom,saw = <&cpu2_saw>; }; CPU3: cpu@3 { @@ -163,6 +173,8 @@ #cooling-cells = <2>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; + qcom,acc = <&cpu3_acc>; + qcom,saw = <&cpu3_saw>; }; L2_0: l2-cache { @@ -323,15 +335,6 @@ }; }; - smem { - compatible = "qcom,smem"; - - memory-region = <&smem_mem>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - - hwlocks = <&tcsr_mutex 3>; - }; - smp2p-hexagon { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; @@ -414,7 +417,7 @@ }; }; - soc: soc { + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -445,7 +448,7 @@ }; }; - rpm_msg_ram: memory@60000 { + rpm_msg_ram: sram@60000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00060000 0x8000>; }; @@ -1384,11 +1387,17 @@ lpass: audio-controller@7708000 { status = "disabled"; compatible = "qcom,lpass-cpu-apq8016"; + + /* + * Note: Unlike the name would suggest, the SEC_I2S_CLK + * is actually only used by Tertiary MI2S while + * Primary/Secondary MI2S both use the PRI_I2S_CLK. + */ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; @@ -1420,7 +1429,7 @@ }; sdhc_1: sdhci@7824000 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -1438,7 +1447,7 @@ }; sdhc_2: sdhci@7864000 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -1765,7 +1774,7 @@ label = "pronto"; - wcnss { + wcnss_ctrl: wcnss { compatible = "qcom,wcnss"; qcom,smd-channels = "WCNSS_CTRL"; @@ -1871,6 +1880,54 @@ status = "disabled"; }; }; + + cpu0_acc: power-manager@b088000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b088000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu0_saw: power-manager@b089000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b089000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu1_acc: power-manager@b098000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b098000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu1_saw: power-manager@b099000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b099000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu2_acc: power-manager@b0a8000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b0a8000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu2_saw: power-manager@b0a9000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0a9000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu3_acc: power-manager@b0b8000 { + compatible = "qcom,msm8916-acc"; + reg = <0x0b0b8000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; + + cpu3_saw: power-manager@b0b9000 { + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0b9000 0x1000>; + status = "reserved"; /* Controlled by PSCI firmware */ + }; }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 1ccca83292ac..4da6c44bf532 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -16,6 +16,8 @@ / { model = "LG Nexus 5X"; compatible = "lg,bullhead", "qcom,msm8992"; + chassis-type = "handset"; + /* required for bootloader to select correct board */ qcom,msm-id = <251 0>, <252 0>; qcom,board-id = <0xb64 0>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts index 5322b9ce5839..8933b53694e8 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts @@ -12,4 +12,5 @@ / { model = "Microsoft Lumia 950"; compatible = "microsoft,talkman", "qcom,msm8992"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index 357d55496e75..69fcb6b0398d 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -14,6 +14,8 @@ / { model = "Xiaomi Mi 4C"; compatible = "xiaomi,libra", "qcom,msm8992"; + chassis-type = "handset"; + /* required for bootloader to select correct board */ qcom,msm-id = <251 0 252 0>; qcom,pmic-id = <65545 65546 0 0>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts index c096b7758aa0..0e3dd48f0dbf 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts @@ -14,6 +14,7 @@ / { model = "Huawei Nexus 6P"; compatible = "huawei,angler", "qcom,msm8994"; + chassis-type = "handset"; /* required for bootloader to select correct board */ qcom,msm-id = <207 0x20000>; qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts index d0aaf5750c21..c593418202b8 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts @@ -12,4 +12,5 @@ / { model = "Microsoft Lumia 950 XL"; compatible = "microsoft,cityman", "qcom,msm8994"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts index b5e90c85aaf6..99388b019a11 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z3+/Z4"; compatible = "sony,ivy-row", "qcom,msm8994"; + chassis-type = "handset"; }; &pm8994_l3 { diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts index a1d1a075941a..71758d2cfd5e 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z4 Tablet (LTE)"; compatible = "sony,karin-row", "qcom,msm8994"; + chassis-type = "tablet"; }; &blsp2_i2c5 { diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts index 1385956a69f3..69b7df0ed605 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z5 Premium"; compatible = "sony,satsuki-row", "qcom,msm8994"; + chassis-type = "handset"; }; &pm8994_l14 { diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts index d3ba9867a369..466508cd8234 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z5"; compatible = "sony,sumire-row", "qcom,msm8994"; + chassis-type = "handset"; }; /delete-node/ &pm8994_l19; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts index f129479bbf95..76bf50191f9a 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia Z5 Compact"; compatible = "sony,suzuran-row", "qcom,msm8994"; + chassis-type = "handset"; }; &pm8994_l14 { diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 986fe60dec5f..5a9a5ed0565f 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -715,7 +715,7 @@ reg = <0xfc400000 0x2000>; }; - rpm_msg_ram: memory@fc428000 { + rpm_msg_ram: sram@fc428000 { compatible = "qcom,rpm-msg-ram"; reg = <0xfc428000 0x4000>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts index 45ed594c1b9c..7d9fc35bc7a0 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts @@ -5,9 +5,31 @@ /dts-v1/; -#include "msm8996-mtp.dtsi" +#include "msm8996.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8996 MTP"; compatible = "qcom,msm8996-mtp"; + + aliases { + serial0 = &blsp2_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + serial@75b0000 { + status = "okay"; + }; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi deleted file mode 100644 index ac43a91f1104..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. - */ - -#include "msm8996.dtsi" - -/ { - aliases { - serial0 = &blsp2_uart2; - }; - - chosen { - stdout-path = "serial0"; - }; - - soc { - serial@75b0000 { - status = "okay"; - }; - }; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_phy { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts index b4cca54dcb68..4a0645db0ae1 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts @@ -12,6 +12,7 @@ / { model = "Sony Xperia X Performance"; compatible = "sony,dora-row", "qcom,msm8996"; + chassis-type = "handset"; }; /delete-node/ &tof_sensor; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts index be6ea855fcce..d3100ddf926f 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts @@ -12,4 +12,5 @@ / { model = "Sony Xperia XZ"; compatible = "sony,kagura-row", "qcom,msm8996"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts index 1eee7d0fc178..3e5bdaba8378 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts @@ -12,6 +12,7 @@ / { model = "Sony Xperia XZs"; compatible = "sony,keyaki-row", "qcom,msm8996"; + chassis-type = "handset"; }; &pm8994_l19 { diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index 507396c4d23b..ff7f39d29dd5 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -620,6 +620,7 @@ &pmi8994_wled { status = "okay"; default-brightness = <512>; + qcom,num-strings = <3>; }; &rpm_requests { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi new file mode 100644 index 000000000000..01e573f0dfbf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -0,0 +1,673 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com> + */ + +/dts-v1/; + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + clocks { + compatible = "simple-bus"; + + divclk1_cdc: divclk1 { + compatible = "gpio-gate-clock"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk1_default>; + }; + + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + vol_up { + label = "Volume Up"; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + + dome { + label = "Home"; + gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + reserved-memory { + memory@88800000 { + reg = <0x0 0x88800000 0x0 0x1400000>; + no-map; + }; + + /* This platform has all PIL regions offset by 0x1400000 */ + /delete-node/ mpss@88800000; + mpss_region: mpss@89c00000 { + reg = <0x0 0x89c00000 0x0 0x6200000>; + no-map; + }; + + /delete-node/ adsp@8ea00000; + adsp_region: adsp@8ea00000 { + reg = <0x0 0x8fe00000 0x0 0x1b00000>; + no-map; + }; + + /delete-node/ slpi@90b00000; + slpi_region: slpi@91900000 { + reg = <0x0 0x91900000 0x0 0xa00000>; + no-map; + }; + + /delete-node/ gpu@8f200000; + zap_shader_region: gpu@92300000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x92300000 0x0 0x2000>; + no-map; + }; + + /delete-node/ venus@91000000; + venus_region: venus@90400000 { + reg = <0x0 0x92400000 0x0 0x500000>; + no-map; + }; + + ramoops@92900000 { + compatible = "ramoops"; + reg = <0x0 0x92900000 0x0 0x100000>; + no-map; + + record-size = <0x8000>; + console-size = <0x80000>; + ftrace-size = <0x20000>; + pmsg-size = <0x40000>; + }; + + /delete-node/ rmtfs@86700000; + rmtfs@f6c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf6c00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /delete-node/ mba@91500000; + mba_region: mba@f6f00000 { + reg = <0x0 0xf6f00000 0x0 0x100000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v2_tp: vdd-3v2-tp { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v2_tp"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + startup-delay-us = <4000>; + vin-supply = <&vph_pwr>; + + gpio = <&tlmm 73 0>; + enable-active-high; + }; + + vdd_3v3: rome-vreg { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <4000>; + vin-supply = <&vph_pwr_bbyp>; + + gpio = <&pm8994_gpios 9 0>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&rome_enable_default>; + + /* Required by QCA6174a - vddpe-3v3 */ + regulator-always-on; + }; + + /* WL_EN pin defined as a fixed regulator */ + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_default>; + }; +}; + +&adsp_pil { + status = "okay"; +}; + +&blsp2_i2c2 { + status = "okay"; + label = "NFC_I2C"; + clock-frequency = <400000>; + + nfc: pn548@28 { + compatible = "nxp,nxp-nci-i2c"; + + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; +}; + +&blsp2_i2c3 { + status = "okay"; + label = "TYPEC_I2C"; + + typec: tusb320@47 { + compatible = "ti,tusb320"; + reg = <0x47>; + interrupt-parent = <&tlmm>; + interrupts = <63 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&blsp2_i2c6 { + status = "okay"; + label = "MSM_TS_I2C"; +}; + +&blsp1_uart2 { + status = "okay"; + label = "QCA_UART"; + + bluetooth: qca6174a { + compatible = "qcom,qca6174-bt"; + + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + }; +}; + +&dsi0 { + status = "okay"; + + vdd-supply = <&vreg_l2a_1p25>; + vddio-supply = <&vreg_l14a_1p8>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; +}; + +&dsi0_out { + status = "okay"; + + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + + vcca-supply = <&vreg_l28a_0p925>; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&pcie0 { + status = "okay"; + + /* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */ + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; + + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&pm8994_resin { + status = "okay"; + + linux,code = <KEY_VOLUMEDOWN>; +}; + +&usb3 { + status = "okay"; + extcon = <&typec>; + + qcom,select-utmi-as-pipe-clk; + + dwc3@6a00000 { + extcon = <&typec>; + + /* usb3-phy is not used on this device */ + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + + maximum-speed = "high-speed"; + snps,is-utmi-l1-suspend; + snps,usb2-gadget-lpm-disable; + snps,hird-threshold = /bits/ 8 <0>; + }; +}; + +&hsusb_phy1 { + status = "okay"; + extcon = <&typec>; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + + vdda-phy-max-microamp = <18380>; + vdda-pll-max-microamp = <9440>; + + vddp-ref-clk-supply = <&vreg_l25a_1p2>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; + +&venus { + status = "okay"; +}; + +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&divclk1_cdc>, + <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-vbat-supply = <&vph_pwr>; + vdd-micbias-supply = <&vph_pwr_bbyp>; + vdd-io-supply = <&vreg_s4a_1p8>; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + + /* Required by QCA6174a - vdd-core */ + regulator-always-on; + }; + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + + /* Required by QCA6174a - vddio */ + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_0p8: s7 { + regulator-name = "vreg_s7a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p8: l6 { + regulator-name = "vreg_l6a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l19a_3p3: l19 { + regulator-name = "vreg_l19a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l27a_1p2: l27 { + regulator-name = "vreg_l27a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* Required by QCA6174a - vddio-xtal */ + regulator-always-on; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + vph_pwr_bbyp: boost-bypass { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + s8 { + qcom,saw-slave; + }; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + vreg_apc_0p8: s11 { + qcom,saw-leader; + regulator-name = "vreg_apc_0p8"; + regulator-min-microvolt = <470000>; + regulator-max-microvolt = <1140000>; + regulator-max-step-microvolt = <150000>; + regulator-always-on; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2 { + regulator-name = "vdd_gfx"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1015000>; + regulator-enable-ramp-delay = <500>; + }; +}; + +&pm8994_gpios { + wlan_en_default: wlan-en-default { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + bias-disable; + }; + + rome_enable_default: rome-enable-default { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_VPH>; + }; + + divclk1_default: divclk1_default { + pins = "gpio15"; + function = PMIC_GPIO_FUNC_FUNC1; + bias-disable; + power-source = <PM8994_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + divclk4_pin_a: divclk4 { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + bias-disable; + power-source = <PM8994_GPIO_S4>; + }; +}; + +&tlmm { + mdss_dsi_default: mdss_dsi_default { + pins = "gpio8"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_dsi_sleep: mdss_dsi_sleep { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_default: mdss_te_default { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_sleep: mdss_te_sleep { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_default: nfc_default { + pins = "gpio12", "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts new file mode 100644 index 000000000000..34f82e06ef53 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -0,0 +1,465 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Raffaele Tranquillini <raffaele.tranquillini@gmail.com> + */ + +/dts-v1/; + +#include "msm8996-xiaomi-common.dtsi" +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/input/ti-drv260x.h> + +/ { + model = "Xiaomi Mi 5"; + compatible = "xiaomi,gemini", "qcom,msm8996"; + chassis-type = "handset"; + qcom,msm-id = <246 0x30001>; + qcom,pmic-id = <0x20009 0x2000a 0x00 0x00>; + qcom,board-id = <31 0>; + + clocks { + divclk2_haptics: divclk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk2"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk2_pin_a>; + }; + }; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/gemini/adsp.mbn"; +}; + +&blsp2_i2c3 { + haptics: drv2604@5a { + compatible = "ti,drv2604"; + reg = <0x5a>; + enable-gpio = <&tlmm 93 0x00>; + mode = <DRV260X_LRA_MODE>; + library-sel = <DRV260X_LIB_LRA>; + pinctrl-names = "default","sleep"; + pinctrl-0 = <&vibrator_default>; + pinctrl-1 = <&vibrator_sleep>; + }; + + lp5562@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + enable-gpio = <&pm8994_gpios 7 1>; + clock-mode = /bits/8 <2>; + label = "button-backlight"; + + led@0 { + reg = <0>; + chan-name = "button-backlight"; + led-cur = /bits/ 8 <0x32>; + max-cur = /bits/ 8 <0xC8>; + }; + + led@1 { + reg = <0>; + chan-name = "button-backlight1"; + led-cur = /bits/ 8 <0x32>; + max-cur = /bits/ 8 <0xC8>; + }; + }; +}; + +&blsp2_i2c6 { + synaptics@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + vdda-supply = <&vreg_l6a_1p8>; + vdd-supply = <&vdd_3v2_tp>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchscreen_default>; + pinctrl-1 = <&touchscreen_sleep>; + }; + +}; + +&dsi0 { + status = "okay"; + + vdd-supply = <&vreg_l2a_1p25>; + vdda-supply = <&vreg_l19a_3p3>; + vddio-supply = <&vreg_l14a_1p8>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; + + panel: panel@0 { + compatible = "jdi,fhd-r63452"; + reg = <0>; + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + backlight = <&pmi8994_wled>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; + }; +}; + +&pmi8994_wled { + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "gemini"; + audio-routing = "RX_BIAS", "MCLK", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&venus { + firmware-name = "qcom/msm8996/gemini/venus.mbn"; +}; + +&rpm_requests { + pm8994-regulators { + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l29a_2p7: l29 { + regulator-name = "vreg_l29a_2p7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "VOL_UP_N", /* GPIO_2 */ + "SPKR_ID", /* GPIO_3 */ + "PWM_HAPTICS", /* GPIO_4 */ + "INFARED_DRV", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "KEYPAD_LED_EN", /* GPIO_7 */ + "WL_EN", /* GPIO_8 */ + "3P3_ENABLE", /* GPIO_9 */ + "FP_ID", /* GPIO_10 */ + "NC", /* GPIO_11 */ + "NC", /* GPIO_12 */ + "NC", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "DIVCLK1_CDC", /* GPIO_15 */ + "DIVCLK2_HAPTICS", /* GPIO_16 */ + "NC", /* GPIO_17 */ + "32KHz_CLK_IN", /* GPIO_18 */ + "BT_EN", /* GPIO_19 */ + "PMIC_SLB", /* GPIO_20 */ + "UIM_BATT_ALARM", /* GPIO_21 */ + "NC"; /* GPIO_22 */ + + divclk2_pin_a: divclk2 { + pins = "gpio16"; + function = PMIC_GPIO_FUNC_FUNC2; + bias-disable; + power-source = <PM8994_GPIO_S4>; + }; +}; + +&pm8994_mpps { + gpio-line-names = + "NC", /* MPP_1 */ + "CCI_TIMER1", /* MPP_2 */ + "PMIC_SLB", /* MPP_3 */ + "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */ + "NC", /* MPP_5 */ + "NC", /* MPP_6 */ + "NC", /* MPP_7 */ + "NC"; /* MPP_8 */ +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "SPKR_PA_RST", /* GPIO_2 */ + "NC", /* GPIO_3 */ + "NC", /* GPIO_4 */ + "NC", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "NC", /* GPIO_7 */ + "NC", /* GPIO_8 */ + "NC", /* GPIO_9 */ + "NC"; /* GPIO_10 */ +}; + +&tlmm { + gpio-line-names = + "ESE_SPI_MOSI", /* GPIO_0 */ + "ESE_SPI_MISO", /* GPIO_1 */ + "ERR_INT_N", /* GPIO_2 */ + "ESE_SPI_CLK", /* GPIO_3 */ + "MSM_UART_TX", /* GPIO_4 */ + "MSM_UART_RX", /* GPIO_5 */ + "NFC_I2C_SDA", /* GPIO_6 */ + "NFC_I2C_SCL", /* GPIO_7 */ + "LCD0_RESET_N", /* GPIO_8 */ + "NFC_IRQ", /* GPIO_9 */ + "LCD_TE", /* GPIO_10 */ + "LCD_ID_DET1", /* GPIO_11 */ + "NFC_DISABLE", /* GPIO_12 */ + "CAM_MCLK0", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "CAM_MCLK2", /* GPIO_15 */ + "ESE_PWR_REQ", /* GPIO_16 */ + "CCI_I2C_SDA0", /* GPIO_17 */ + "CCI_I2C_SCL0", /* GPIO_18 */ + "CCI_I2C_SDA1", /* GPIO_19 */ + "CCI_I2C_SCL1", /* GPIO_20 */ + "NFC_DWL_REQ", /* GPIO_21 */ + "CCI_TIMER1", /* GPIO_22 */ + "WEBCAM1_RESET_N", /* GPIO_23 */ + "ESE_IRQ", /* GPIO_24 */ + "NC", /* GPIO_25 */ + "WEBCAM1_STANDBY", /* GPIO_26 */ + "NC", /* GPIO_27 */ + "NC", /* GPIO_28 */ + "NC", /* GPIO_29 */ + "CAM1_RST_N", /* GPIO_30 */ + "NC", /* GPIO_31 */ + "NC", /* GPIO_32 */ + "NC", /* GPIO_33 */ + "FP_DOME_SW", /* GPIO_34 */ + "PCI_E0_RST_N", /* GPIO_35 */ + "PCI_E0_CLKREQ_N", /* GPIO_36 */ + "PCI_E0_WAKE", /* GPIO_37 */ + "FM_INT_N", /* GPIO_38 */ + "FM_RESET_N", /* GPIO_39 */ + "NC", /* GPIO_40 */ + "QCA_UART_TXD", /* GPIO_41 */ + "QCA_UART_RXD", /* GPIO_42 */ + "QCA_UART_CTS", /* GPIO_43 */ + "QCA_UART_RTS", /* GPIO_44 */ + "MAWC_UART_TX", /* GPIO_45 */ + "MAWC_UART_RX", /* GPIO_46 */ + "NC", /* GPIO_47 */ + "NC", /* GPIO_48 */ + "AUDIO_SWITCH_EN", /* GPIO_49 */ + "FP_SPI_RST", /* GPIO_50 */ + "TYPEC_I2C_SDA", /* GPIO_51 */ + "TYPEC_I2C_SCL", /* GPIO_52 */ + "CODEC_INT2_N", /* GPIO_53 */ + "CODEC_INT1_N", /* GPIO_54 */ + "APPS_I2C7_SDA", /* GPIO_55 */ + "APPS_I2C7_SCL", /* GPIO_56 */ + "FORCE_USB_BOOT", /* GPIO_57 */ + "SPKR_I2S_BCK", /* GPIO_58 */ + "SPKR_I2S_WS", /* GPIO_59 */ + "SPKR_I2S_DOUT", /* GPIO_60 */ + "SPKR_I2S_DIN", /* GPIO_61 */ + "ESE_RSTN", /* GPIO_62 */ + "TYPEC_INT", /* GPIO_63 */ + "CODEC_RESET_N", /* GPIO_64 */ + "PCM_CLK", /* GPIO_65 */ + "PCM_SYNC", /* GPIO_66 */ + "PCM_DIN", /* GPIO_67 */ + "PCM_DOUT", /* GPIO_68 */ + "HIFI_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "LDO_5V_IN_EN", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "FM_I2S_CLK", /* GPIO_75 */ + "FM_I2S_SYNC", /* GPIO_76 */ + "FM_I2S_DATA", /* GPIO_77 */ + "FM_STATUS", /* GPIO_78 */ + "NC", /* GPIO_79 */ + "SENSOR_RESET_N", /* GPIO_80 */ + "FP_SPI_MOSI", /* GPIO_81 */ + "FP_SPI_MISO", /* GPIO_82 */ + "FP_SPI_CS_N", /* GPIO_83 */ + "FP_SPI_CLK", /* GPIO_84 */ + "NC", /* GPIO_85 */ + "CAM_VDD_1P05_EN", /* GPIO_86 */ + "MSM_TS_I2C_SDA", /* GPIO_87 */ + "MSM_TS_I2C_SCL", /* GPIO_88 */ + "TS_RESOUT_N", /* GPIO_89 */ + "ESE_SPI_CS_N", /* GPIO_90 */ + "NC", /* GPIO_91 */ + "NC", /* GPIO_92 */ + "HAPTICS_EN", /* GPIO_93 */ + "NC", /* GPIO_94 */ + "NC", /* GPIO_95 */ + "NC", /* GPIO_96 */ + "NC", /* GPIO_97 */ + "GRFC_1", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "GRFC_3", /* GPIO_100 */ + "GRFC_4", /* GPIO_101 */ + "NC", /* GPIO_102 */ + "NC", /* GPIO_103 */ + "GRFC_7", /* GPIO_104 */ + "UIM2_DATA", /* GPIO_105 */ + "UIM2_CLK", /* GPIO_106 */ + "UIM2_RESET", /* GPIO_107 */ + "UIM2_PRESENT", /* GPIO_108 */ + "UIM1_DATA", /* GPIO_109 */ + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", /* GPIO_111 */ + "UIM1_PRESENT", /* GPIO_112 */ + "UIM_BATT_ALARM", /* GPIO_113 */ + "GRFC_8", /* GPIO_114 */ + "GRFC_9", /* GPIO_115 */ + "TX_GTR_THRES", /* GPIO_116 */ + "ACCEL_INT", /* GPIO_117 */ + "GYRO_INT", /* GPIO_118 */ + "COMPASS_INT", /* GPIO_119 */ + "PROXIMITY_INT_N", /* GPIO_120 */ + "FP_IRQ", /* GPIO_121 */ + "NC", /* GPIO_122 */ + "HALL_INTR2", /* GPIO_123 */ + "HALL_INTR1", /* GPIO_124 */ + "TS_INT_N", /* GPIO_125 */ + "NC", /* GPIO_126 */ + "GRFC_11", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "EXT_GPS_LNA_EN", /* GPIO_129 */ + "NC", /* GPIO_130 */ + "NC", /* GPIO_131 */ + "NC", /* GPIO_132 */ + "GRFC_14", /* GPIO_133 */ + "GSM_TX2_PHASE_D", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "NC", /* GPIO_136 */ + "RFFE3_DATA", /* GPIO_137 */ + "RFFE3_CLK", /* GPIO_138 */ + "NC", /* GPIO_139 */ + "NC", /* GPIO_140 */ + "RFFE5_DATA", /* GPIO_141 */ + "RFFE5_CLK", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "COEX_UART_TX", /* GPIO_144 */ + "COEX_UART_RX", /* GPIO_145 */ + "RFFE2_DATA", /* GPIO_146 */ + "RFFE2_CLK", /* GPIO_147 */ + "RFFE1_DATA", /* GPIO_148 */ + "RFFE1_CLK"; /* GPIO_149 */ + + touchscreen_default: touchscreen_default { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + touchscreen_sleep: touchscreen_sleep { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + vibrator_default: vibrator_default { + pins = "gpio93"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + vibrator_sleep: vibrator_sleep { + pins = "gpio93"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts new file mode 100644 index 000000000000..e5b8402b1ed6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com> + */ + +/dts-v1/; + +#include "msm8996-xiaomi-common.dtsi" +#include "pmi8996.dtsi" +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> + +/ { + model = "Xiaomi Mi Note 2"; + compatible = "xiaomi,scorpio", "qcom,msm8996"; + chassis-type = "handset"; + qcom,msm-id = <305 0x10000>; + qcom,board-id = <34 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@83401000 { + compatible = "simple-framebuffer"; + reg = <0x00 0x83401000 0x00 (1080 * 1920 * 3)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + /* DSI0 and MDP SMMU clocks */ + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MMSS_MMAGIC_AHB_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc SMMU_MDP_AHB_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>; + + /* MDSS power domain */ + power-domains = <&mmcc MDSS_GDSC>; + }; + }; + + reserved-memory { + cont_splash_mem: memory@83401000 { + reg = <0x0 0x83401000 0x0 (1080 * 1920 * 3)>; + no-map; + }; + }; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/scorpio/adsp.mbn"; +}; + +&blsp2_i2c6 { + touchscreen: atmel-mxt-ts@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + vdda-supply = <&vreg_l6a_1p8>; + vdd-supply = <&vdd_3v2_tp>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchscreen_default>; + pinctrl-1 = <&touchscreen_sleep>; + }; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn"; + }; +}; + +&mdp_smmu { + /* + * Probing this SMMU causes a crash due to writing to some secure + * registers. Disable it for now. + */ + status = "disabled"; +}; + +&mdss { + /* + * MDSS depends on the MDP SMMU, and probing it alters the bootloader + * configured framebuffer used by simplefb. Disable it for now. + */ + status = "disabled"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "scorpio"; + audio-routing = "RX_BIAS", "MCLK"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&venus { + firmware-name = "qcom/msm8996/scorpio/venus.mbn"; +}; + +&rpm_requests { + pm8994-regulators { + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + vreg_l11a_1p1: l11 { + regulator-name = "vreg_l11a_1p1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l18a_2p8: l18 { + regulator-name = "vreg_l18a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <3500000>; + }; + vreg_l29a_2p7: l29 { + regulator-name = "vreg_l29a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + }; +}; + +&vdd_gfx { + regulator-max-microvolt = <1065000>; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "VOL_UP_N", /* GPIO_2 */ + "SPKR_ID", /* GPIO_3 */ + "PWM_HAPTICS", /* GPIO_4 */ + "INFARED_DRV", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "KEYPAD_LED_EN_A", /* GPIO_7 */ + "WL_EN", /* GPIO_8 */ + "3P3_ENABLE", /* GPIO_9 */ + "KEYPAD_LED_EN_B", /* GPIO_10 */ + "FP_ID", /* GPIO_11 */ + "NC", /* GPIO_12 */ + "NC", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "DIVCLK1_CDC", /* GPIO_15 */ + "DIVCLK2_HAPTICS", /* GPIO_16 */ + "NC", /* GPIO_17 */ + "32KHz_CLK_IN", /* GPIO_18 */ + "BT_EN", /* GPIO_19 */ + "PMIC_SLB", /* GPIO_20 */ + "UIM_BATT_ALARM", /* GPIO_21 */ + "NC"; /* GPIO_22 */ +}; + +&pm8994_mpps { + gpio-line-names = + "VREF_SDC_UIM_APC", /* MPP_1 */ + "NC", /* MPP_2 */ + "VREF_DACX", /* MPP_3 */ + "NC", /* MPP_4 */ + "NC", /* MPP_5 */ + "STAT_SMB1351", /* MPP_6 */ + "NC", /* MPP_7 */ + "NC"; /* MPP_8 */ +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "SPKR_PA_RST", /* GPIO_2 */ + "NC", /* GPIO_3 */ + "NC", /* GPIO_4 */ + "NC", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "NC", /* GPIO_7 */ + "NC", /* GPIO_8 */ + "NC", /* GPIO_9 */ + "NC"; /* GPIO_10 */ +}; + +&tlmm { + gpio-line-names = + "ESE_SPI_MOSI", /* GPIO_0 */ + "ESE_SPI_MISO", /* GPIO_1 */ + "NC", /* GPIO_2 */ + "ESE_SPI_CLK", /* GPIO_3 */ + "MSM_UART_TX", /* GPIO_4 */ + "MSM_UART_RX", /* GPIO_5 */ + "NFC_I2C_SDA", /* GPIO_6 */ + "NFC_I2C_SCL", /* GPIO_7 */ + "OLED_RESET_N", /* GPIO_8 */ + "NFC_IRQ", /* GPIO_9 */ + "OLED_TE", /* GPIO_10 */ + "OLED_ID_DET1", /* GPIO_11 */ + "NFC_DISABLE", /* GPIO_12 */ + "CAM_MCLK0", /* GPIO_13 */ + "OLED_ID_DET2", /* GPIO_14 */ + "CAM_MCLK2", /* GPIO_15 */ + "ESE_PWR_REQ", /* GPIO_16 */ + "CCI_I2C_SDA0", /* GPIO_17 */ + "CCI_I2C_SCL0", /* GPIO_18 */ + "CCI_I2C_SDA1", /* GPIO_19 */ + "CCI_I2C_SCL1", /* GPIO_20 */ + "NFC_DWL_REQ", /* GPIO_21 */ + "CCI_TIMER1", /* GPIO_22 */ + "WEBCAM1_RESET_N", /* GPIO_23 */ + "ESE_IRQ", /* GPIO_24 */ + "NC", /* GPIO_25 */ + "WEBCAM1_STANDBY", /* GPIO_26 */ + "NC", /* GPIO_27 */ + "NC", /* GPIO_28 */ + "OLED_ERR_FG", /* GPIO_29 */ + "CAM1_RST_N", /* GPIO_30 */ + "HIFI_SW_MUTE", /* GPIO_31 */ + "NC", /* GPIO_32 */ + "NC", /* GPIO_33 */ + "FP_DOME_SW", /* GPIO_34 */ + "PCI_E0_RST_N", /* GPIO_35 */ + "PCI_E0_CLKREQ_N", /* GPIO_36 */ + "PCI_E0_WAKE", /* GPIO_37 */ + "OV_PWDN", /* GPIO_38 */ + "NC", /* GPIO_39 */ + "VDDR_1P6_EN", /* GPIO_40 */ + "QCA_UART_TXD", /* GPIO_41 */ + "QCA_UART_RXD", /* GPIO_42 */ + "QCA_UART_CTS", /* GPIO_43 */ + "QCA_UART_RTS", /* GPIO_44 */ + "MAWC_UART_TX", /* GPIO_45 */ + "MAWC_UART_RX", /* GPIO_46 */ + "NC", /* GPIO_47 */ + "NC", /* GPIO_48 */ + "AUDIO_SWITCH_EN", /* GPIO_49 */ + "FP_SPI_RST", /* GPIO_50 */ + "TYPEC_I2C_SDA", /* GPIO_51 */ + "TYPEC_I2C_SCL", /* GPIO_52 */ + "CODEC_INT2_N", /* GPIO_53 */ + "CODEC_INT1_N", /* GPIO_54 */ + "APPS_I2C7_SDA", /* GPIO_55 */ + "APPS_I2C7_SCL", /* GPIO_56 */ + "FORCE_USB_BOOT", /* GPIO_57 */ + "SPKR_I2S_BCK", /* GPIO_58 */ + "SPKR_I2S_WS", /* GPIO_59 */ + "SPKR_I2S_DOUT", /* GPIO_60 */ + "SPKR_I2S_DIN", /* GPIO_61 */ + "ESE_RSTN", /* GPIO_62 */ + "TYPEC_INT", /* GPIO_63 */ + "CODEC_RESET_N", /* GPIO_64 */ + "PCM_CLK", /* GPIO_65 */ + "PCM_SYNC", /* GPIO_66 */ + "PCM_DIN", /* GPIO_67 */ + "PCM_DOUT", /* GPIO_68 */ + "CDC_44K1_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "LDO_5V_IN_EN", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "TSP_RST_N", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TOUCHKEY_INT", /* GPIO_77 */ + "SPKR_I2S_MCLK", /* GPIO_78 */ + "SPKR_PA_INT", /* GPIO_79 */ + "SENSOR_RESET_N", /* GPIO_80 */ + "FP_SPI_MOSI", /* GPIO_81 */ + "FP_SPI_MISO", /* GPIO_82 */ + "FP_SPI_CS_N", /* GPIO_83 */ + "FP_SPI_CLK", /* GPIO_84 */ + "HIFI_SD", /* GPIO_85 */ + "CAM_VDD_1P05_EN", /* GPIO_86 */ + "MSM_TS_I2C_SDA", /* GPIO_87 */ + "MSM_TS_I2C_SCL", /* GPIO_88 */ + "NC", /* GPIO_89 */ + "ESE_SPI_CS_N", /* GPIO_90 */ + "NC", /* GPIO_91 */ + "NC", /* GPIO_92 */ + "NC", /* GPIO_93 */ + "NC", /* GPIO_94 */ + "NC", /* GPIO_95 */ + "NC", /* GPIO_96 */ + "GRFC_0", /* GPIO_97 */ + "GRFC_1", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "GRFC_3", /* GPIO_100 */ + "GRFC_4", /* GPIO_101 */ + "NC", /* GPIO_102 */ + "NC", /* GPIO_103 */ + "GRFC_7", /* GPIO_104 */ + "UIM2_DATA", /* GPIO_105 */ + "UIM2_CLK", /* GPIO_106 */ + "UIM2_RESET", /* GPIO_107 */ + "UIM2_PRESENT", /* GPIO_108 */ + "UIM1_DATA", /* GPIO_109 */ + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", /* GPIO_111 */ + "UIM1_PRESENT", /* GPIO_112 */ + "UIM_BATT_ALARM", /* GPIO_113 */ + "GRFC_8", /* GPIO_114 */ + "GRFC_9", /* GPIO_115 */ + "TX_GTR_THRES", /* GPIO_116 */ + "ACC_INT", /* GPIO_117 */ + "GYRO_INT", /* GPIO_118 */ + "COMPASS_INT", /* GPIO_119 */ + "PROXIMITY_INT_N", /* GPIO_120 */ + "FP_IRQ", /* GPIO_121 */ + "TSP_TA", /* GPIO_122 */ + "HALL_INTR2", /* GPIO_123 */ + "HALL_INTR1", /* GPIO_124 */ + "TS_INT_N", /* GPIO_125 */ + "NC", /* GPIO_126 */ + "GRFC_11", /* GPIO_127 */ + "HIFI_PWR_EN", /* GPIO_128 */ + "EXT_GPS_LNA_EN", /* GPIO_129 */ + "NC", /* GPIO_130 */ + "NC", /* GPIO_131 */ + "NC", /* GPIO_132 */ + "GRFC_14", /* GPIO_133 */ + "GSM_TX2_PHASE_D", /* GPIO_134 */ + "HIFI_SW_SEL", /* GPIO_135 */ + "GRFC_15", /* GPIO_136 */ + "RFFE3_DATA", /* GPIO_137 */ + "RFFE3_CLK", /* GPIO_138 */ + "NC", /* GPIO_139 */ + "NC", /* GPIO_140 */ + "RFFE5_DATA", /* GPIO_141 */ + "RFFE5_CLK", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "COEX_UART_TX", /* GPIO_144 */ + "COEX_UART_RX", /* GPIO_145 */ + "RFFE2_DATA", /* GPIO_146 */ + "RFFE2_CLK", /* GPIO_147 */ + "RFFE1_DATA", /* GPIO_148 */ + "RFFE1_CLK"; /* GPIO_149 */ + + touchscreen_default: touchscreen_default { + pins = "gpio75", "gpio125"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + touchscreen_sleep: touchscreen_sleep { + pins = "gpio75", "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 52df22ab3f6a..bccc2d0b35a8 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -582,7 +582,6 @@ pcie_phy: phy@34000 { compatible = "qcom,msm8996-qmp-pcie-phy"; reg = <0x00034000 0x488>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -598,12 +597,13 @@ reset-names = "phy", "common", "cfg"; status = "disabled"; - pciephy_0: lane@35000 { + pciephy_0: phy@35000 { reg = <0x00035000 0x130>, <0x00035200 0x200>, <0x00035400 0x1dc>; #phy-cells = <0>; + #clock-cells = <1>; clock-output-names = "pcie_0_pipe_clk_src"; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; @@ -611,7 +611,7 @@ reset-names = "lane0"; }; - pciephy_1: lane@36000 { + pciephy_1: phy@36000 { reg = <0x00036000 0x130>, <0x00036200 0x200>, <0x00036400 0x1dc>; @@ -624,7 +624,7 @@ reset-names = "lane1"; }; - pciephy_2: lane@37000 { + pciephy_2: phy@37000 { reg = <0x00037000 0x130>, <0x00037200 0x200>, <0x00037400 0x1dc>; @@ -638,7 +638,7 @@ }; }; - rpm_msg_ram: memory@68000 { + rpm_msg_ram: sram@68000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00068000 0x6000>; }; @@ -705,6 +705,28 @@ #thermal-sensor-cells = <1>; }; + cryptobam: dma@644000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00644000 0x24000>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_CE1_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely = <1>; + }; + + crypto: crypto@67a000 { + compatible = "qcom,crypto-v5.4"; + reg = <0x0067a000 0x6000>; + clocks = <&gcc GCC_CE1_AHB_CLK>, + <&gcc GCC_CE1_AXI_CLK>, + <&gcc GCC_CE1_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + }; + tcsr_mutex_regs: syscon@740000 { compatible = "syscon"; reg = <0x00740000 0x40000>; @@ -1211,6 +1233,20 @@ }; }; + blsp1_uart2_default: blsp1-uart2-default { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + blsp1_i2c3_default: blsp1-i2c2-default { pins = "gpio47", "gpio48"; function = "blsp_i2c3"; @@ -1239,6 +1275,20 @@ bias-disable; }; + blsp2_i2c3_default: blsp2-i2c3 { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c3_sleep: blsp2-i2c3-sleep { + pins = "gpio51", "gpio52"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + wcd_intr_default: wcd-intr-default{ pins = "gpio54"; function = "gpio"; @@ -1495,6 +1545,11 @@ }; }; + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + spmi_bus: qcom,spmi@400f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0400f000 0x1000>, @@ -1746,7 +1801,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufsphy_lane: lanes@627400 { + ufsphy_lane: phy@627400 { reg = <0x627400 0x12c>, <0x627600 0x200>, <0x627c00 0x1b4>; @@ -2586,7 +2641,6 @@ usb3phy: phy@7410000 { compatible = "qcom,msm8996-qmp-usb3-phy"; reg = <0x07410000 0x1c4>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -2601,12 +2655,13 @@ reset-names = "phy", "common"; status = "disabled"; - ssusb_phy_0: lane@7410200 { + ssusb_phy_0: phy@7410200 { reg = <0x07410200 0x200>, <0x07410400 0x130>, <0x07410600 0x1a8>; #phy-cells = <0>; + #clock-cells = <1>; clock-output-names = "usb3_phy_pipe_clk_src"; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -2686,7 +2741,7 @@ status = "disabled"; }; - blsp1_dma: dma@7544000 { + blsp1_dma: dma-controller@7544000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07544000 0x2b000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; @@ -2704,6 +2759,9 @@ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; dma-names = "tx", "rx"; status = "disabled"; @@ -2743,7 +2801,7 @@ status = "disabled"; }; - blsp2_dma: dma@7584000 { + blsp2_dma: dma-controller@7584000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07584000 0x2b000>; interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; @@ -2808,6 +2866,24 @@ status = "disabled"; }; + blsp2_i2c3: i2c@75b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x075b7000 0x1000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c3_default>; + pinctrl-1 = <&blsp2_i2c3_sleep>; + dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + blsp2_i2c5: i2c@75b9000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75b9000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts index db5821be1e2f..e204b7050441 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts @@ -8,6 +8,7 @@ / { model = "Asus NovaGo TP370QL"; compatible = "asus,novago-tp370ql", "qcom,msm8998"; + chassis-type = "convertible"; }; &blsp1_i2c6 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 125d7923d713..3f60575a351c 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -313,6 +313,8 @@ &ufsphy { status = "okay"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts new file mode 100644 index 000000000000..3d495ce3f46a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + */ + +/dts-v1/; + +#include "msm8998-mtp.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "F(x)tec Pro1 (QX1000)"; + compatible = "fxtec,pro1", "qcom,msm8998"; + chassis-type = "handset"; + qcom,board-id = <0x02000b 0x10>; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; + }; + + gpio-hall-sensors { + compatible = "gpio-keys"; + input-name = "hall-sensors"; + label = "Hall sensors"; + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor1_default>; + + hall-sensor1 { + label = "Keyboard Hall Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; + debounce-interval = <15>; + gpio-key,wakeup; + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + }; + }; + + gpio-kb-extra-keys { + compatible = "gpio-keys"; + input-name = "extra-kb-keys"; + label = "Keyboard extra keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_kb_pins_extra>; + + home { + label = "Home"; + gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + debounce-interval = <15>; + linux,can-disable; + }; + + super-l { + label = "Super Left"; + gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + linux,code = <KEY_FN>; + debounce-interval = <15>; + linux,can-disable; + }; + + super-r { + label = "Super Right"; + gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; + linux,code = <KEY_FN>; + debounce-interval = <15>; + linux,can-disable; + }; + + shift { + label = "Shift"; + gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RIGHTSHIFT>; + debounce-interval = <15>; + linux,can-disable; + }; + + ctrl { + label = "Ctrl"; + gpios = <&tlmm 128 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LEFTCTRL>; + debounce-interval = <15>; + linux,can-disable; + }; + + alt { + label = "Alt"; + gpios = <&tlmm 129 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LEFTALT>; + debounce-interval = <15>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "side-buttons"; + label = "Side buttons"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>, + <&cam_snapshot_pin_a>; + vol-up { + label = "Volume Up"; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEUP>; + gpio-key,wakeup; + debounce-interval = <15>; + }; + + camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + }; + + keyboard-leds { + compatible = "gpio-leds"; + + backlight { + color = <LED_COLOR_ID_WHITE>; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + label = "white:kbd_backlight"; + retain-state-suspended; + }; + + caps-lock { + color = <LED_COLOR_ID_YELLOW>; + default-state = "off"; + function = LED_FUNCTION_CAPSLOCK; + gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; + label = "yellow:capslock"; + linux,default-trigger = "kbd-capslock"; + }; + }; + + reserved-memory { + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2000000>; + no-map; + }; + + zap_shader_region: memory@f6400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6400000 0x0 0x2000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + console-size = <0x60000>; + ecc-size = <16>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + record-size = <0x10000>; + }; + }; + + ts_vio_vreg: ts-vio-vreg { + compatible = "regulator-fixed"; + regulator-name = "ts_vio_reg"; + startup-delay-us = <2>; + enable-active-high; + gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_vio_default>; + regulator-always-on; + }; +}; + +&blsp2_i2c1 { + status = "ok"; + + touchscreen@14 { + compatible = "goodix,gt9286"; + reg = <0x14>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vreg_l28_3p0>; + VDDIO-supply = <&ts_vio_vreg>; + pinctrl-names = "active"; + pinctrl-0 = <&ts_rst_n>, <&ts_int_n>; + }; +}; + +&mmcc { + status = "ok"; +}; + +&mmss_smmu { + status = "ok"; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + cam_focus_pin_a: cam-focus-btn-active { + pins = "gpio7"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + cam_snapshot_pin_a: cam-snapshot-btn-active { + pins = "gpio8"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + debounce = <15625>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + mdp_vsync_n: mdp-vsync-n { + pins = "gpio10"; + function = "mdp_vsync_a"; + bias-pull-down; + drive-strength = <2>; + }; + + gpio_kb_pins_extra: gpio-kb-pins-extra { + pins = "gpio21", "gpio32", "gpio33", "gpio114", + "gpio128", "gpio129"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ts_vio_default: ts-vio-def { + pins = "gpio81"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + ts_rst_n: ts-rst-n { + pins = "gpio89"; + function = "gpio"; + bias-pull-up; + drive-strength = <8>; + }; + + hall_sensor1_default: hall-sensor1-def { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + input-enable; + }; + + ts_int_n: ts-int-n { + pins = "gpio125"; + function = "gpio"; + bias-disable; + drive-strength = <8>; + }; +}; + +&ufshc { + status = "ok"; +}; + +&ufsphy { + status = "ok"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; + +/* GT9286 analog supply */ +&vreg_l28_3p0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts index 24073127091f..1eb406b43fd7 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts @@ -8,6 +8,7 @@ / { model = "HP Envy x2"; compatible = "hp,envy-x2", "qcom,msm8998"; + chassis-type = "convertible"; }; &blsp1_i2c6 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts index 89492ed5196c..f55f6f3e3e5d 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts @@ -8,6 +8,7 @@ / { model = "Lenovo Miix 630"; compatible = "lenovo,miix-630", "qcom,msm8998"; + chassis-type = "convertible"; }; &blsp1_i2c6 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index a1d15eab8553..af67c641df4e 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -371,10 +371,6 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; vddp-ref-clk-supply = <&vreg_l26a_1p2>; - vdda-phy-max-microamp = <51400>; - vdda-pll-max-microamp = <14600>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts index 66b9297588ab..9563eb62db88 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts @@ -11,6 +11,7 @@ / { model = "OnePlus 5"; compatible = "oneplus,cheeseburger", "qcom,msm8998"; + chassis-type = "handset"; /* Required for bootloader to select correct board */ qcom,board-id = <8 0 16859 23>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 0f5c7828a901..654188027f79 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -480,10 +480,6 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; vddp-ref-clk-supply = <&vreg_l26a_1p2>; - vdda-phy-max-microamp = <51400>; - vdda-pll-max-microamp = <14600>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; }; &usb3 { diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts index 544b9b0ae44b..5d0dabbaee4e 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts @@ -10,6 +10,7 @@ / { model = "OnePlus 5T"; compatible = "oneplus,dumpling", "qcom,msm8998"; + chassis-type = "handset"; /* Required for bootloader to select correct board */ qcom,board-id = <8 0 17801 43>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts new file mode 100644 index 000000000000..caacb7c28402 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ1 Compact"; + compatible = "sony,xperia-lilac", "qcom,msm8998"; + chassis-type = "handset"; +}; + +&ibb { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; +}; + +&lab { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + qcom,soft-start-us = <800>; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts new file mode 100644 index 000000000000..978495a8a6b9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ Premium"; + compatible = "sony,xperia-maple", "qcom,msm8998"; + chassis-type = "handset"; + + disp_dvdd_vreg: disp-dvdd-vreg { + compatible = "regulator-fixed"; + regulator-name = "disp_dvdd_en"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + startup-delay-us = <0>; + enable-active-high; + gpio = <&pmi8998_gpio 10 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&disp_dvdd_en>; + }; +}; + +&ibb { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; +}; + +&lab { + regulator-min-microvolt = <5800000>; + regulator-max-microvolt = <5800000>; + qcom,soft-start-us = <200>; +}; + +&pmi8998_gpio { + disp_dvdd_en: disp-dvdd-en-active { + pins = "gpio10"; + function = "normal"; + bias-disable; + drive-push-pull; + output-high; + power-source = <0>; + qcom,drive-strength = <1>; + }; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts new file mode 100644 index 000000000000..4a1f98a21031 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ1"; + compatible = "sony,xperia-poplar", "qcom,msm8998"; + chassis-type = "handset"; +}; + +&ibb { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; +}; + +&lab { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + qcom,soft-start-us = <800>; +}; + +&vreg_l18a_2p85 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi new file mode 100644 index 000000000000..91e391282181 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -0,0 +1,670 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */ + qcom,board-id = <8 0>; + + clocks { + compatible = "simple-bus"; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk_pin>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + }; + }; + + board_vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + regulator-always-on; + regulator-boot-on; + }; + + cam0_vdig_vreg: cam0-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam0_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_vdig_default>; + }; + + cam1_vdig_vreg: cam1-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam1_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam1_vdig_default>; + vin-supply = <&vreg_s3a_1p35>; + }; + + cam_vio_vreg: cam-vio-vreg { + compatible = "regulator-fixed"; + regulator-name = "cam_vio_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_vio_default>; + vin-supply = <&vreg_lvs1a_1p8>; + }; + + touch_vddio_vreg: touch-vddio-vreg { + compatible = "regulator-fixed"; + regulator-name = "touch_vddio_vreg"; + startup-delay-us = <10000>; + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_vddio_en>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + label = "Side buttons"; + pinctrl-names = "default"; + pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, + <&cam_snapshot_pin_a>; + vol-down { + label = "Volume Down"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEDOWN>; + gpio-key,wakeup; + debounce-interval = <15>; + }; + + camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + input-name = "hall-sensors"; + label = "Hall sensors"; + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor0_default>; + + hall-sensor0 { + label = "Cover Hall Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + gpio-key,wakeup; + debounce-interval = <30>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x3700000>; + no-map; + }; + + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + zap_shader_region: memory@f6400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6400000 0x0 0x2000>; + no-map; + }; + + adsp_region: memory@fe000000 { + reg = <0x0 0xfe000000 0x0 0x800000>; + no-map; + }; + + qseecom_region: memory@fe800000 { + reg = <0x0 0xfe800000 0x0 0x1400000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vib_default>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + touchscreen@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_n>; + + vdd-supply = <&vreg_l28_3p0>; + vio-supply = <&touch_vddio_vreg>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <1000>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5_sleep { + bias-disable; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + + clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&ibb { + regulator-min-microamp = <800000>; + regulator-max-microamp = <800000>; + regulator-enable-ramp-delay = <200>; + regulator-over-current-protection; + regulator-pull-down; + regulator-ramp-delay = <1>; + regulator-settling-time-up-us = <600>; + regulator-settling-time-down-us = <1000>; + regulator-soft-start; + qcom,discharge-resistor-kohms = <300>; +}; + +&lab { + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-enable-ramp-delay = <500>; + regulator-over-current-protection; + regulator-pull-down; + regulator-ramp-delay = <1>; + regulator-settling-time-up-us = <50000>; + regulator-settling-time-down-us = <3000>; + regulator-soft-start; +}; + +&mmcc { + status = "ok"; +}; + +&mmss_smmu { + status = "ok"; +}; + +&pm8005_lsid1 { + pm8005-regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + /* VDD_GFX supply */ + pm8005_s1: s1 { + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1088000>; + regulator-enable-ramp-delay = <500>; + regulator-always-on; + }; + }; +}; + +&pm8998_gpio { + vol_down_pin_a: vol-down-active { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + cam_focus_pin_a: cam-focus-btn-active { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + cam_snapshot_pin_a: cam-snapshot-btn-active { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + audio_mclk_pin: audio-mclk-pin-active { + pins = "gpio13"; + function = "func2"; + power-source = <0>; + }; +}; + +&pmi8998_gpio { + cam_vio_default: cam-vio-active { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-disable; + drive-push-pull; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + power-source = <1>; + }; + + vib_default: vib-en { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-disable; + drive-push-pull; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <0>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEUP>; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2032000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-system-load = <73400>; + regulator-allow-set-load; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-system-load = <12560>; + regulator-allow-set-load; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + vreg_l14a_1p85: l14 { + regulator-min-microvolt = <1848000>; + regulator-max-microvolt = <1856000>; + regulator-system-load = <32000>; + regulator-allow-set-load; + }; + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + vreg_l18a_2p85: l18 {}; + vreg_l19a_2p7: l19 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + vreg_l22a_2p85: l22 { }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_lvs1a_1p8: lvs1 { }; + vreg_lvs2a_1p8: lvs2 { }; + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + mdp_vsync_n: mdp-vsync-n { + pins = "gpio10"; + function = "mdp_vsync_a"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_ven: nfc-ven { + pins = "gpio12"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; + + msm_mclk0_default: msm-mclk0-active { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + msm_mclk1_default: msm-mclk1-active { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cci0_default: cci0-default { + pins = "gpio18", "gpio19"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cci1_default: cci1-default { + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cam0_vdig_default: cam0-vdig-default { + pins = "gpio21"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + cam1_vdig_default: cam1-vdig-default { + pins = "gpio25"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + hall_sensor0_default: acc-cover-open { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + input-enable; + }; + + ts_int_n: ts-int-n { + pins = "gpio125"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_vddio_en: ts-vddio-en-default { + pins = "gpio133"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; +}; + +/* + * WARNING: + * Disable UFS until card quirks are in to avoid unrecoverable hard-brick + * that would happen as soon as the UFS card gets probed as, without the + * required quirks, the bootloader will be erased right after card probe. + */ +&ufshc { + status = "disabled"; +}; + +&ufsphy { + status = "disabled"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + /* Force to peripheral until we have Type-C hooked up */ + dr_mode = "peripheral"; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 34039b5c8017..408f265e277b 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8998.h> #include <dt-bindings/clock/qcom,gpucc-msm8998.h> +#include <dt-bindings/clock/qcom,mmcc-msm8998.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> @@ -117,7 +118,7 @@ clock-output-names = "xo_board"; }; - sleep_clk { + sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32764>; @@ -308,38 +309,42 @@ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { compatible = "arm,idle-state"; idle-state-name = "little-retention"; + /* CPU Retention (C2D), L2 Active */ arm,psci-suspend-param = <0x00000002>; entry-latency-us = <81>; exit-latency-us = <86>; - min-residency-us = <200>; + min-residency-us = <504>; }; LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { compatible = "arm,idle-state"; idle-state-name = "little-power-collapse"; + /* CPU + L2 Power Collapse (C3, D4) */ arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <273>; - exit-latency-us = <612>; - min-residency-us = <1000>; + entry-latency-us = <814>; + exit-latency-us = <4562>; + min-residency-us = <9183>; local-timer-stop; }; BIG_CPU_SLEEP_0: cpu-sleep-1-0 { compatible = "arm,idle-state"; idle-state-name = "big-retention"; + /* CPU Retention (C2D), L2 Active */ arm,psci-suspend-param = <0x00000002>; entry-latency-us = <79>; exit-latency-us = <82>; - min-residency-us = <200>; + min-residency-us = <1302>; }; BIG_CPU_SLEEP_1: cpu-sleep-1-1 { compatible = "arm,idle-state"; idle-state-name = "big-power-collapse"; + /* CPU + L2 Power Collapse (C3, D4) */ arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <336>; - exit-latency-us = <525>; - min-residency-us = <1000>; + entry-latency-us = <724>; + exit-latency-us = <2027>; + min-residency-us = <9419>; local-timer-stop; }; }; @@ -855,21 +860,24 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x00100000 0xb0000>; + + clock-names = "xo", "sleep_clk"; + clocks = <&xo>, <&sleep_clk>; }; - rpm_msg_ram: memory@778000 { + rpm_msg_ram: sram@778000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00778000 0x7000>; }; - qfprom: qfprom@780000 { + qfprom: qfprom@784000 { compatible = "qcom,qfprom"; - reg = <0x00780000 0x621c>; + reg = <0x00784000 0x621c>; #address-cells = <1>; #size-cells = <1>; - qusb2_hstx_trim: hstx-trim@423a { - reg = <0x423a 0x1>; + qusb2_hstx_trim: hstx-trim@23a { + reg = <0x23a 0x1>; bits = <0 4>; }; }; @@ -954,10 +962,10 @@ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 135 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 136 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 138 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, @@ -990,7 +998,7 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; - pciephy: lane@1c06800 { + pciephy: phy@1c06800 { reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>; #phy-cells = <0>; @@ -1062,7 +1070,7 @@ reset-names = "ufsphy"; resets = <&ufshc 0>; - ufsphy_lanes: lanes@1da7400 { + ufsphy_lanes: phy@1da7400 { reg = <0x01da7400 0x128>, <0x01da7600 0x1fc>, <0x01da7c00 0x1dc>, @@ -1416,6 +1424,103 @@ }; }; + adreno_gpu: gpu@5000000 { + compatible = "qcom,adreno-540.1", "qcom,adreno"; + reg = <0x05000000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gpucc RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>, + <&gpucc RBCPR_CLK>, + <&gpucc GFX3D_CLK>; + clock-names = "iface", + "rbbmtimer", + "mem", + "mem_iface", + "rbcpr", + "core"; + + interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&adreno_smmu 0>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + #stream-id-cells = <16>; + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-710000097 { + opp-hz = /bits/ 64 <710000097>; + opp-level = <RPM_SMD_LEVEL_TURBO>; + opp-supported-hw = <0xFF>; + }; + + opp-670000048 { + opp-hz = /bits/ 64 <670000048>; + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + opp-supported-hw = <0xFF>; + }; + + opp-596000097 { + opp-hz = /bits/ 64 <596000097>; + opp-level = <RPM_SMD_LEVEL_NOM>; + opp-supported-hw = <0xFF>; + }; + + opp-515000097 { + opp-hz = /bits/ 64 <515000097>; + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + opp-supported-hw = <0xFF>; + }; + + opp-414000000 { + opp-hz = /bits/ 64 <414000000>; + opp-level = <RPM_SMD_LEVEL_SVS>; + opp-supported-hw = <0xFF>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + opp-supported-hw = <0xFF>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + opp-supported-hw = <0xFF>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x05040000 0x10000>; + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>; + clock-names = "iface", "mem", "mem_iface"; + + #global-interrupts = <0>; + #iommu-cells = <1>; + interrupts = + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + /* + * GPU-GX GDSC's parent is GPU-CX. We need to bring up the + * GPU-CX for SMMU but we need both of them up for Adreno. + * Contemporarily, we also need to manage the VDDMX rpmpd + * domain in the Adreno driver. + * Enable GPU CX/GX GDSCs here so that we can manage the + * SoC VDDMX RPM Power Domain in the Adreno driver. + */ + power-domains = <&gpucc GPU_GX_GDSC>; + status = "disabled"; + }; + gpucc: clock-controller@5065000 { compatible = "qcom,msm8998-gpucc"; #clock-cells = <1>; @@ -1917,6 +2022,11 @@ }; }; + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + spmi_bus: spmi@800f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0800f000 0x1000>, @@ -1981,7 +2091,6 @@ compatible = "qcom,msm8998-qmp-usb3-phy"; reg = <0x0c010000 0x18c>; status = "disabled"; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1995,13 +2104,14 @@ <&gcc GCC_USB3PHY_PHY_BCR>; reset-names = "phy", "common"; - usb1_ssphy: lane@c010200 { + usb1_ssphy: phy@c010200 { reg = <0xc010200 0x128>, <0xc010400 0x200>, <0xc010c00 0x20c>, <0xc010600 0x128>, <0xc010800 0x200>; #phy-cells = <0>; + #clock-cells = <1>; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; @@ -2187,7 +2297,7 @@ #size-cells = <0>; }; - blsp2_dma: dma@c184000 { + blsp2_dma: dma-controller@c184000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c184000 0x25000>; interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; @@ -2330,6 +2440,73 @@ #size-cells = <0>; }; + mmcc: clock-controller@c8c0000 { + compatible = "qcom,mmcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xc8c0000 0x40000>; + status = "disabled"; + + clock-names = "xo", + "gpll0", + "dsi0dsi", + "dsi0byte", + "dsi1dsi", + "dsi1byte", + "hdmipll", + "dplink", + "dpvco", + "core_bi_pll_test_se"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_MMSS_GPLL0_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + }; + + mmss_smmu: iommu@cd00000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x0cd00000 0x40000>; + #iommu-cells = <1>; + + clocks = <&mmcc MNOC_AHB_CLK>, + <&mmcc BIMC_SMMU_AHB_CLK>, + <&rpmcc RPM_SMD_MMAXI_CLK>, + <&mmcc BIMC_SMMU_AXI_CLK>; + clock-names = "iface-mm", "iface-smmu", + "bus-mm", "bus-smmu"; + status = "disabled"; + + #global-interrupts = <0>; + interrupts = + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + }; + remoteproc_adsp: remoteproc@17300000 { compatible = "qcom,msm8998-adsp-pas"; reg = <0x17300000 0x4040>; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index b49860cd1387..3ca2860bb0cf 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause // Copyright (c) 2019, The Linux Foundation. All rights reserved. +#include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi new file mode 100644 index 000000000000..c5d85064562b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> + */ + +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm6350", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6350_pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pm6350_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + pm6350_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + pm6350_gpios: gpios@c000 { + compatible = "qcom,pm6350-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm6350", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index e847d7209afc..d0ef8a1675e2 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -49,9 +49,10 @@ }; pon: pon@800 { - compatible = "qcom,pm8916-pon"; - + compatible = "qcom,pm8998-pon"; reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; pwrkey { compatible = "qcom,pm8941-pwrkey"; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index 05086cbe573b..cfef42353611 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -72,13 +72,6 @@ interrupt-names = "ovp"; label = "backlight"; - qcom,switching-freq = <800>; - qcom,ovp-millivolt = <29600>; - qcom,current-boost-limit = <970>; - qcom,current-limit-microamp = <20000>; - qcom,num-strings = <2>; - qcom,enabled-strings = <0 1>; - status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index f931cb0de231..d58902432812 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -41,6 +41,14 @@ }; }; + pm8916_usbin: extcon@1300 { + compatible = "qcom,pm8941-misc"; + reg = <0x1300>; + interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_vbus"; + status = "disabled"; + }; + pm8916_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; @@ -86,19 +94,17 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>; - reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; pm8916_mpps: mpps@a000 { - compatible = "qcom,pm8916-mpp"; + compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp"; reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8916_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; }; pm8916_gpios: gpios@c000 { diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index ad19016df047..5ab46117d737 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -119,18 +119,13 @@ }; pm8994_mpps: mpps@a000 { - compatible = "qcom,pm8994-mpp"; + compatible = "qcom,pm8994-mpp", "qcom,spmi-mpp"; reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>, - <0 0xa4 0 IRQ_TYPE_NONE>, - <0 0xa5 0 IRQ_TYPE_NONE>, - <0 0xa6 0 IRQ_TYPE_NONE>, - <0 0xa7 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8994_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index b4ac900ab115..6e7c252568e6 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -38,11 +38,8 @@ reg = <0xd800 0xd900>; interrupts = <3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>; interrupt-names = "short"; - qcom,num-strings = <3>; - /* Yes, all four strings *have to* be defined or things won't work. */ - qcom,enabled-strings = <0 1 2 3>; qcom,cabc; - qcom,eternal-pfet; + qcom,external-pfet; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index d230c510d4b7..0fef5f113f05 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -41,5 +41,17 @@ interrupt-names = "sc-err", "ocp"; }; }; + + pmi8998_wled: leds@d800 { + compatible = "qcom,pmi8998-wled"; + reg = <0xd800 0xd900>; + interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp", "short"; + label = "backlight"; + + status = "disabled"; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index 04fc2632a0b2..769f9726806f 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -59,6 +59,7 @@ reg = <0x6100>, <0x6200>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; }; pmk8350_gpios: gpio@b000 { diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 339790ba585d..6db753b49326 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -318,7 +318,7 @@ status = "disabled"; }; - rpm_msg_ram: memory@60000 { + rpm_msg_ram: sram@60000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00060000 0x6000>; }; @@ -719,6 +719,11 @@ reg = <0x01937000 0x25000>; }; + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x001000>, diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 28d5b5528516..845eb7a6bf92 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -16,6 +16,8 @@ / { model = "Qualcomm Technologies, Inc. Robotics RB5"; compatible = "qcom,qrb5165-rb5", "qcom,sm8250"; + qcom,msm-id = <455 0x20001>; + qcom,board-id = <11 3>; aliases { serial0 = &uart12; @@ -1222,9 +1224,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5a_0p88>; - vdda-max-microamp = <89900>; vdda-pll-supply = <&vreg_l9a_1p2>; - vdda-pll-max-microamp = <18800>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 5ae2ddc65f7e..8756c2b25c7e 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -307,6 +307,16 @@ status = "okay"; }; +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sa8155p/adsp.mdt"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sa8155p/cdsp.mdt"; +}; + &uart2 { status = "okay"; }; @@ -328,9 +338,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l8c_1p2>; - vdda-max-microamp = <87100>; vdda-pll-supply = <&vreg_l5a_0p88>; - vdda-pll-max-microamp = <18300>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts index 21b516e0694a..8290d036044a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts @@ -23,6 +23,20 @@ status = "disabled"; }; +&pm6150_adc { + status = "disabled"; + + /delete-node/ skin-temp-thermistor@4e; + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + status = "disabled"; + + /delete-node/ charger-thermistor@0; + /delete-node/ skin-temp-thermistor@1; +}; + /* * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature, * which currently is not supported by the PM6150 ADC driver. Disable the diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index a758e4d22612..14ed09f30a73 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -11,6 +11,7 @@ ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" /* Deleted nodes from trogdor.dtsi */ @@ -33,7 +34,7 @@ ap_h1_spi: &spi0 {}; polling-delay = <0>; thermal-sensors = <&pm6150_adc_tm 1>; - sustainable-power = <814>; + sustainable-power = <965>; trips { skin_temp_alert0: trip-point0 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts new file mode 100644 index 000000000000..db6c2da67cea --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-homestar.dtsi" + +/ { + model = "Google Homestar (rev2)"; + compatible = "google,homestar-rev2","google,homestar-rev23", "qcom,sc7180"; +}; + +&panel { + /delete-property/hpd-gpios; + no-hpd; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts new file mode 100644 index 000000000000..3fd8aa5bb7a6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-homestar.dtsi" + +/ { + model = "Google Homestar (rev3+)"; + compatible = "google,homestar", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi new file mode 100644 index 000000000000..4ab890b2a1d4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -0,0 +1,336 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +#include "sc7180.dtsi" + +ap_ec_spi: &spi6 {}; +ap_h1_spi: &spi0 {}; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" + +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + max98360a_1: max98360a_1 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + max98360a_2: max98360a_2 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + max98360a_3: max98360a_3 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + pp3300_touch: pp3300-touch { + compatible = "regulator-fixed"; + regulator-name = "pp3300_touch"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_touch>; + + vin-supply = <&pp3300_a>; + }; + + thermal-zones { + skin_temp_thermal: skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + sustainable-power = <965>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <55000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <73000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +&ap_tp_i2c { + status = "disabled"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@14 { + compatible = "goodix,gt7375p"; + reg = <0x14>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + + vdd-supply = <&pp3300_touch>; + }; +}; + +/* Panel controls backlight over aux channel */ + +&backlight { + status = "disabled"; +}; + +&camcc { + status = "okay"; +}; + +&panel { + compatible = "samsung,atna33xc20"; + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + /delete-property/ backlight; +}; + +&pm6150_adc { + skin-temp-thermistor@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + skin-temp-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&secondary_mi2s { + qcom,playback-sd-lines = <0 1>; +}; + +&sound_multimedia1_codec { + sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_HOMESTAR"; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +&sec_mi2s_active{ + pinmux { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "mi2s_1"; + }; +}; + +&ts_reset_l { + pinconf { + /* + * We want reset state by default and it will be up to the + * driver to disable this when it's ready. + */ + output-low; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "AVEE_LCD_EN", + "", + "AMP_EN", + "AMP_EN2", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "SEL_LCM", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "AMP_DIN_2", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "WLAN_SW_CTRL", + "", + "REPORT_E", + "VDD_RESET_1.8V", + "ID0", + "", + "ID1", + "AVDD_LCD_EN", + "MIPI_1.8V_EN", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "PP1800_MIPI_SW_EN", + "EN_PP3300_TOUCH", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "SDM_GRFC_3", + "", + "", + "BOOT_CONFIG_4", + "BOOT_CONFIG_2", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "BOOT_CONFIG_3", + "WCI2_LTE_COEX_TXD", + "WCI2_LTE_COEX_RXD", + "", + "", + "", + "", + "FORCED_USB_BOOT_POL", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + en_pp3300_touch: en-pp3300-touch { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 00535aaa43c9..8b79fbb75756 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -11,6 +11,7 @@ ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" &ap_sar_sensor { semtech,cs0-ground; @@ -54,6 +55,18 @@ ap_ts_pen_1v8: &i2c4 { compatible = "boe,nv133fhm-n62"; }; +&pm6150_adc { + status = "disabled"; + + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + status = "disabled"; + + /delete-node/ charger-thermistor@0; +}; + &trackpad { interrupts = <58 IRQ_TYPE_EDGE_FALLING>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi index 469aad4e5948..fd4b71203754 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi @@ -17,3 +17,14 @@ firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn", "qcom/sc7180-trogdor/modem/qdsp6sw.mbn"; }; + +&ipa { + status = "okay"; + + /* + * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the + * modem needs to cover certain init steps (GSI init), and + * the AP needs to wait for it. + */ + modem-init; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi new file mode 100644 index 000000000000..a3d69540d4e4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for the boards with Parade ps8640 edp bridge + * + * Copyright 2021 Google LLC. + */ + +/ { + pp3300_brij_ps8640: pp3300-brij-ps8640 { + compatible = "regulator-fixed"; + status = "okay"; + regulator-name = "pp3300_brij_ps8640"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_edp_brij_ps8640>; + + vin-supply = <&pp3300_a>; + }; +}; + +&dsi0_out { + remote-endpoint = <&ps8640_in>; +}; + +edp_brij_i2c: &i2c2 { + status = "okay"; + clock-frequency = <400000>; + + ps8640_bridge: bridge@8 { + compatible = "parade,ps8640"; + reg = <0x8>; + + powerdown-gpios = <&tlmm 104 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en>, <&edp_brij_ps8640_rst>; + + vdd12-supply = <&pp1200_brij>; + vdd33-supply = <&pp3300_brij_ps8640>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ps8640_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + ps8640_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&ps8640_out>; + }; + }; + }; + }; + }; +}; + +&tlmm { + edp_brij_ps8640_rst: edp-brij-ps8640-rst { + pinmux { + pins = "gpio11"; + function = "gpio"; + }; + + pinconf { + pins = "gpio11"; + drive-strength = <2>; + bias-disable; + }; + }; + + en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640 { + pinmux { + pins = "gpio32"; + function = "gpio"; + }; + + pinconf { + pins = "gpio32"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts index e122a6b481ff..76a130bad60a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts @@ -26,6 +26,14 @@ status = "disabled"; }; +&pm6150_adc { + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + /delete-node/ charger-thermistor@0; +}; + &pp3300_hub { /* pp3300_l7c is used to power the USB hub */ /delete-property/regulator-always-on; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts index 4f32e6733f4c..88cf2246c18a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts @@ -22,3 +22,11 @@ &charger_thermal { status = "disabled"; }; + +&pm6150_adc { + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + /delete-node/ charger-thermistor@0; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index a246dbd74cc1..e90f99ef5323 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -11,6 +11,7 @@ ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { thermal-zones { @@ -44,7 +45,7 @@ ap_h1_spi: &spi0 {}; }; &cpu6_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &cpu7_alert0 { @@ -56,7 +57,7 @@ ap_h1_spi: &spi0 {}; }; &cpu7_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &cpu8_alert0 { @@ -68,7 +69,7 @@ ap_h1_spi: &spi0 {}; }; &cpu8_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &cpu9_alert0 { @@ -80,7 +81,7 @@ ap_h1_spi: &spi0 {}; }; &cpu9_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &gpio_keys { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 2b522f9e0d8f..457c25499863 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -13,6 +13,7 @@ ap_ec_spi: &spi6 {}; ap_h1_spi: &spi0 {}; #include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-ti-sn65dsi86.dtsi" / { model = "Google Trogdor (rev1+)"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi new file mode 100644 index 000000000000..97d5e45abd1d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for the boards with TI sn65dsi86 edp bridge + * + * Copyright 2021 Google LLC. + */ + +&dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +edp_brij_i2c: &i2c2 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86_bridge: bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&pp1800_edp_vpll>; + vccio-supply = <&pp1800_brij_vccio>; + vcca-supply = <&pp1200_brij>; + vcc-supply = <&pp1200_brij>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK3>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&tlmm { + edp_brij_irq: edp-brij-irq { + pinmux { + pins = "gpio11"; + function = "gpio"; + }; + + pinconf { + pins = "gpio11"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 70c88c37de32..d4f4441179fc 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -601,15 +601,6 @@ &dsi0 { status = "okay"; vdda-supply = <&vdda_mipi_dsi0_1p2>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&sn65dsi86_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; }; &dsi_phy { @@ -617,70 +608,6 @@ vdds-supply = <&vdda_mipi_dsi0_pll>; }; -edp_brij_i2c: &i2c2 { - status = "okay"; - clock-frequency = <400000>; - - sn65dsi86_bridge: bridge@2d { - compatible = "ti,sn65dsi86"; - reg = <0x2d>; - pinctrl-names = "default"; - pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>; - gpio-controller; - #gpio-cells = <2>; - - interrupt-parent = <&tlmm>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; - - enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; - - vpll-supply = <&pp1800_edp_vpll>; - vccio-supply = <&pp1800_brij_vccio>; - vcca-supply = <&pp1200_brij>; - vcc-supply = <&pp1200_brij>; - - clocks = <&rpmhcc RPMH_LN_BB_CLK3>; - clock-names = "refclk"; - - no-hpd; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - sn65dsi86_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - sn65dsi86_out: endpoint { - data-lanes = <0 1>; - remote-endpoint = <&panel_in_edp>; - }; - }; - }; - - aux-bus { - panel: panel { - /* Compatible will be filled in per-board */ - power-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; - - port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; - }; -}; - ap_sar_sensor_i2c: &i2c5 { clock-frequency = <400000>; @@ -750,17 +677,6 @@ hp_i2c: &i2c9 { }; }; -&ipa { - status = "okay"; - - /* - * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the - * modem needs to cover certain init steps (GSI init), and - * the AP needs to wait for it. - */ - modem-init; -}; - &lpass_cpu { status = "okay"; @@ -1244,19 +1160,6 @@ ap_spi_fp: &spi10 { }; }; - edp_brij_irq: edp-brij-irq { - pinmux { - pins = "gpio11"; - function = "gpio"; - }; - - pinconf { - pins = "gpio11"; - drive-strength = <2>; - bias-pull-down; - }; - }; - en_pp3300_codec: en-pp3300-codec { pinmux { pins = "gpio83"; @@ -1523,13 +1426,13 @@ ap_spi_fp: &spi10 { pinconf-cmd { pins = "sdc1_cmd"; bias-pull-up; - drive-strength = <10>; + drive-strength = <16>; }; pinconf-data { pins = "sdc1_data"; bias-pull-up; - drive-strength = <10>; + drive-strength = <16>; }; pinconf-rclk { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index c8921e2d6480..faf8b807d0ff 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -15,7 +15,6 @@ #include <dt-bindings/interconnect/qcom,sc7180.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> -#include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/reset/qcom,sdm845-pdc.h> @@ -137,8 +136,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; @@ -162,8 +161,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_100>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -184,8 +183,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_200>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -206,8 +205,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_300>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -228,8 +227,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_400>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -250,8 +249,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_500>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -272,8 +271,8 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1740>; - dynamic-power-coefficient = <405>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <480>; next-level-cache = <&L2_600>; operating-points-v2 = <&cpu6_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -294,8 +293,8 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1740>; - dynamic-power-coefficient = <405>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <480>; next-level-cache = <&L2_700>; operating-points-v2 = <&cpu6_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -1922,14 +1921,15 @@ clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd SC7180_CX>, + power-domains = <&rpmhpd SC7180_CX>, <&rpmhpd SC7180_MX>, <&rpmhpd SC7180_MSS>; - power-domain-names = "load_state", "cx", "mx", "mss"; + power-domain-names = "cx", "mx", "mss"; memory-region = <&mpss_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2647,7 +2647,7 @@ }; qspi: spi@88dc000 { - compatible = "qcom,qspi-v1"; + compatible = "qcom,sc7180-qspi", "qcom,qspi-v1"; reg = <0 0x088dc000 0 0x600>; #address-cells = <1>; #size-cells = <0>; @@ -3219,12 +3219,16 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sc7180-aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; spmi_bus: spmi@c440000 { @@ -3246,6 +3250,21 @@ cell-index = <0>; }; + imem@146aa000 { + compatible = "simple-mfd"; + reg = <0 0x146aa000 0 0x2000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146aa000 0x2000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sc7180-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; @@ -3616,7 +3635,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 1>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu0_alert0: trip-point0 { @@ -3665,7 +3684,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 2>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu1_alert0: trip-point0 { @@ -3714,7 +3733,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 3>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu2_alert0: trip-point0 { @@ -3763,7 +3782,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 4>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu3_alert0: trip-point0 { @@ -3812,7 +3831,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 5>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu4_alert0: trip-point0 { @@ -3861,7 +3880,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 6>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu5_alert0: trip-point0 { @@ -3910,7 +3929,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 9>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu6_alert0: trip-point0 { @@ -3951,7 +3970,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 10>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu7_alert0: trip-point0 { @@ -3992,7 +4011,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 11>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu8_alert0: trip-point0 { @@ -4033,7 +4052,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 12>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu9_alert0: trip-point0 { diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts new file mode 100644 index 000000000000..7a92679a688b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine board device tree source + * + * Copyright 2021 Google LLC. + */ + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Google Herobrine"; + compatible = "google,herobrine", + "qcom,sc7280"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi new file mode 100644 index 000000000000..4619fa9fcacd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -0,0 +1,1412 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Herobrine board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sc7280.dtsi" + +/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +/* + * Reserved memory changes + * + * Delete all unused memory nodes and define the peripheral memory regions + * required by the board dts. + * + */ + +/delete-node/ &hyp_mem; +/delete-node/ &xbl_mem; +/delete-node/ &sec_apps_mem; + +/* Increase the size from 2MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x83600000 0x0 0x800000>; +}; + +/ { + reserved-memory { + adsp_mem: memory@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + camera_mem: memory@8ad00000 { + reg = <0x0 0x8ad00000 0x0 0x500000>; + no-map; + }; + + venus_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + + mpss_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: memory@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + mba_mem: memory@9c700000 { + reg = <0x0 0x9c700000 0x0 0x200000>; + no-map; + }; + }; + + aliases { + serial0 = &uart5; + serial1 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* FIXED REGULATORS - parents above children */ + + /* This is the top level supply and variable voltage */ + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + /* This divides ppvar_sys by 2, so voltage is variable */ + src_vph_pwr: src-vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vph_pwr"; + + /* EC turns on with switchcap_on; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; + + pp5000_s3: pp5000-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp5000_s3"; + + /* EC turns on with en_pp5000_s3; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_z1: pp3300-z1-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_z1"; + + /* EC turns on with en_pp3300_z1; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_audio: + pp3300_codec: pp3300-codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_codec"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_codec>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_cam: + pp3300_edp: + pp3300_ts: pp3300-edp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_edp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_dx_edp>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_fp: + pp3300_fp_ls: + pp3300_mcu: pp3300-fp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_fp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-boot-on; + regulator-always-on; + + /* + * WARNING: it is intentional that GPIO 42 isn't listed here. + * The userspace script for updating the fingerprint firmware + * needs to control the FP regulators during a FW update, + * hence the signal can't be owned by the kernel regulator. + */ + + pinctrl-names = "default"; + pinctrl-0 = <&en_fp_rails>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_hub: pp3300-hub-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_hub"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-boot-on; + regulator-always-on; + + gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_hub>; + + vin-supply = <&pp3300_z1>; + }; + + pp3300_tp: pp3300-tp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_tp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* AP turns on with PP1800_L18B_S0; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp3300_z1>; + }; + + pp2850_uf_cam: pp2850-uf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp2850_uf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&uf_cam_en>; + + vin-supply = <&pp3300_cam>; + }; + + pp2850_vcm_wf_cam: pp2850-vcm-wf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp2850_vcm_wf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wf_cam_en>; + + vin-supply = <&pp3300_cam>; + }; + + pp2850_wf_cam: pp2850-wf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp2850_wf_cam"; + + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp3300_cam>; + }; + + pp1800_fp: pp1800-fp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp1800_fp"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + regulator-always-on; + + /* + * WARNING: it is intentional that GPIO 42 isn't listed here. + * The userspace script for updating the fingerprint firmware + * needs to control the FP regulators during a FW update, + * hence the signal can't be owned by the kernel regulator. + */ + + pinctrl-names = "default"; + pinctrl-0 = <&en_fp_rails>; + + vin-supply = <&pp1800_l18b_s0>; + status = "disabled"; + }; + + pp1800_uf_cam: pp1800-uf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp1800_uf_cam"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&uf_cam_en>; + */ + + vin-supply = <&pp1800_l19b>; + }; + + pp1800_wf_cam: pp1800-wf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp1800_wf_cam"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp1800_l19b>; + }; + + pp1200_wf_cam: pp1200-wf-cam { + compatible = "regulator-fixed"; + regulator-name = "pp1200_wf_cam"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* + * The pinconf can only be referenced once so we put it on the + * first regulator and comment it out here. + * + * pinctrl-names = "default"; + * pinctrl-0 = <&wf_cam_en>; + */ + + vin-supply = <&pp1200_l6b>; + }; + + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_pdct_l>; + + pen_insert: pen-insert { + label = "Pen Insert"; + + /* Insert = low, eject = high */ + gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + status = "disabled"; + keyboard_backlight: keyboard-backlight { + status = "disabled"; + label = "cros_ec::kbd_backlight"; + pwms = <&cros_ec_pwm 0>; + max-brightness = <1023>; + }; + }; +}; + +&apps_rsc { + pm7325-regulators { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd19_pmu_pcie_i: + vdd19_pmu_rfa_i: + vreg_s1b_wlan: + vreg_s1b: smps1 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2040000>; + }; + + vdd_pmu_aon_i: + vreg_s7b_wlan: + vreg_s7b: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vdd13_pmu_pcie_i: + vdd13_pmu_rfa_i: + vreg_s8b_wlan: + vreg_s8b: smps8 { + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1500000>; + }; + + vdda_usb_ss_dp_core: + vreg_l1b: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_usb_hs0_3p1: + vreg_l2b: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1200_l6b: + vdd_ufs_1p2: + vdd_vref: + vdda_csi01_1p2: + vdda_csi23_1p2: + vdda_csi4_1p2: + vdda_dsi0_1p2: + vdda_pcie0_1p2: + vdda_pcie1_1p2: + vdda_usb_ss_dp_1p2: + vdda_qlink0_1p2_ck: + vdda_qlink1_1p2_ck: + vreg_l6b_1p2: + vreg_l6b: ldo6 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2950_l7b: + vreg_l7b: ldo7 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + codec_vcc: + pp1800_l18b_s0: + pp1800_ts: + vdd1: + vddpx_0: + vddpx_3: + vddpx_7: + vreg_l18b: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_l19b: + vddpx_ts: + vddpx_wl4otp: + vreg_l19b: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8350c-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vddpx_1: + vreg_s9c: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + pp1800_l1c: + pp1800_pen: + vdd_a_gfx_cs_1p1: + vdd_a_cxo_1p8: + vdd_qfprom: + vdda_apc_cs_1p8: + vdda_qrefs_1p8: + vdda_turing_q6_cs_1p8: + vdda_usb_hs0_1p8: + vreg_l1c: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + dmic_vdd: + pp1800_alc5682: + pp1800_l2c: + pp1800_vreg_alc5682: + vreg_l2c: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_sar: + pp3300_sensor: + vreg_l3c: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ppvar_uim1: + vddpx_5: + vreg_l4c: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2950_l5c: + uim_vcc: + vddpx_6: + vreg_l5c: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ppvar_l6c: + vddpx_2: + vreg_l6c: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_prox: + pp1800_sar: + vreg_l8c: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2950_l9c: + vreg_l9c: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_a_gnss_0p9: + vdd_ufs_core: + vdd_usb_hs0_core: + vdd_vref_0p9: + vdda_csi01_0p9: + vdda_csi23_0p9: + vdda_csi4_0p9: + vdda_dsi0_pll_0p9: + vdda_dsi0_0p9: + vdda_pcie0_core: + vdda_pcie1_core: + vdda_qlink0_0p9: + vdda_qlink1_0p9: + vdda_qlink0_0p9_ck: + vdda_qlink1_0p9_ck: + vdda_qrefs_0p875: + vreg_l10c_0p8: + vreg_l10c: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2800_l11c: + vreg_l11c: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_l12c: + vreg_l12c: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_l13c: + vreg_l13c: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +ap_tp_i2c: &i2c1 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <102 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +ap_h1_i2c: &i2c12 { + status = "okay"; + clock-frequency = <400000>; + + tpm@50 { + compatible = "google,cr50"; + reg = <0x50>; + + pinctrl-names = "default"; + pinctrl-0 = <&h1_ap_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_EDGE_RISING>; + }; +}; + +ap_ts_pen: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <81 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +&pm7325_gpios { + status = "disabled"; /* No GPIOs are connected */ +}; + +&pmk8350_gpios { + status = "disabled"; /* No GPIOs are connected */ +}; + +&pmk8350_pon { + status = "disabled"; +}; + +&pmk8350_rtc { + status = "disabled"; +}; + +&pmk8350_vadc { + pmk8350_die_temp { + reg = <PMK8350_ADC7_DIE_TEMP>; + label = "pmk8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + pmr735a_die_temp { + reg = <PMR735A_ADC7_DIE_TEMP>; + label = "pmr735a_die_temp"; + qcom,pre-scaling = <1 1>; + }; +}; + +&qfprom { + vcc-supply = <&vdd_qfprom>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <37500000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + vmmc-supply = <&pp2950_l7b>; + vqmmc-supply = <&pp1800_l19b>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vmmc-supply = <&pp2950_l9c>; + vqmmc-supply = <&ppvar_l6c>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; +}; + +ap_ec_spi: &spi8 { + status = "okay"; + + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs_gpio_init_high>, <&qup_spi8_cs_gpio>; + cs-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <142 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_ec_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + usb_c0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + usb_c1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi> + +&keyboard_controller { + function-row-physmap = < + MATRIX_KEY(0x00, 0x02, 0) /* T1 */ + MATRIX_KEY(0x03, 0x02, 0) /* T2 */ + MATRIX_KEY(0x02, 0x02, 0) /* T3 */ + MATRIX_KEY(0x01, 0x02, 0) /* T4 */ + MATRIX_KEY(0x03, 0x04, 0) /* T5 */ + MATRIX_KEY(0x02, 0x04, 0) /* T6 */ + MATRIX_KEY(0x01, 0x04, 0) /* T7 */ + MATRIX_KEY(0x02, 0x09, 0) /* T8 */ + MATRIX_KEY(0x01, 0x09, 0) /* T9 */ + MATRIX_KEY(0x00, 0x04, 0) /* T10 */ + >; + linux,keymap = < + MATRIX_KEY(0x00, 0x02, KEY_BACK) + MATRIX_KEY(0x03, 0x02, KEY_REFRESH) + MATRIX_KEY(0x02, 0x02, KEY_ZOOM) + MATRIX_KEY(0x01, 0x02, KEY_SCALE) + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x02, 0x09, KEY_MUTE) + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) + + CROS_STD_MAIN_KEYMAP + >; +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vdd_usb_hs0_core>; + vdda33-supply = <&vdda_usb_hs0_3p1>; + vdda18-supply = <&vdda_usb_hs0_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb_ss_dp_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vdd_usb_hs0_core>; + vdda33-supply = <&vdda_usb_hs0_3p1>; + vdda18-supply = <&vdda_usb_hs0_1p8>; +}; + +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ + +&qspi_cs0 { + bias-disable; +}; + +&qspi_clk { + bias-disable; +}; + +&qspi_data01 { + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&sdc1_on { + clk { + bias-disable; + drive-strength = <16>; + }; + + cmd { + bias-pull-up; + drive-strength = <10>; + }; + + data { + bias-pull-up; + drive-strength = <10>; + }; + + rclk { + bias-pull-down; + }; +}; + +&sdc2_on { + clk { + bias-disable; + drive-strength = <16>; + }; + + cmd { + bias-pull-up; + drive-strength = <10>; + }; + + data { + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd { + pins = "gpio91"; + bias-pull-up; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&pm8350c_gpios { + gpio-line-names = "AP_SUSPEND", + "", + "", + "AP_BL_EN", + "", + "SD_CD_ODL", + "", + "", + "AP_BL_PWM"; + + ap_bl_en: ap-bl-en { + pins = "gpio4"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-disable; + + /* Force backlight to be disabled to match state at boot. */ + output-low; + }; +}; + +&tlmm { + gpio-line-names = "HP_I2C_SDA", /* 0 */ + "HP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "UF_CAM_EN", + "WF_CAM_EN", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + + "", /* 10 */ + "", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "AP_SPI_CLK", + "AP_SPI_CS0_L", + "", + "", + "EDP_HPD", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "EN_PP3300_HUB", + "", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "BT_UART_CTS", + "BT_UART_RTS", + + "BT_UART_TXD", /* 30 */ + "BT_UART_RXD", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "", + "", + "", + "PEN_PDCT_L", + + "IO_BRD_ID0", /* 40 */ + "IO_BRD_ID1", + "EN_FP_RAILS", + "PEN_IRQ_L", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + + "AP_H1_SPI_CLK", /* 50 */ + "AP_H1_SPI_CS_L", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "H1_AP_INT_ODL", + "", + "LCM_RST_1V8_L", + "AMP_EN", + "", + "DP_HOT_PLUG_DET", + + "HUB_RST_L", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "", + "UF_CAM_MCLK", + "WF_CAM_MCLK", + "IO_BRD_ID2", + "EN_PP3300_CODEC", + "EC_IN_RW_ODL", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "WF_CAM_SDA", + "WF_CAM_SCL", + "AP_BRD_ID0", + "AP_BRD_ID1", + "AP_BRD_ID2", + "", + "FPMCU_BOOT0", + "FP_RST_L", + "PE_CLKREQ_ODL", + + "EN_EDP_PP3300", /* 80 */ + "TS_INT_L", + "FORCE_USB_BOOT", + "WCD_RST_L", + "WLAN_EN", + "BT_EN", + "WLAN_SW_CTRL", + "PCIE0_RESET_L", + "PCIE0_CLK_REQ_L", + "PCIE0_WAKE_L", + + "AS_EN", /* 90 */ + "SD_CD_ODL", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "BT_WLAN_SB_CLK", + "BT_WLAN_SB_DATA", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "TP_INT_ODL", + "", + "IO_SKU_ID2", + "TS_RESET_L", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM2_DATA", + + "UIM2_CLK", /* 110 */ + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "RFFE0_CLK", + "RFFE0_DATA/BOOT_CONFIG_0", + "RFFE1_CLK", + + "RFFE1_DATA/BOOT_CONFIG_1", /* 120 */ + "RFFE2_CLK", + "RFFE2_DATA/BOOT_CONFIG_2", + "RFFE3_CLK", + "RFFE3_DATA/BOOT_CONFIG_3", + "RFFE4_CLK", + "RFFE4_DATA", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "IO_SKU_ID0", + + "IO_SKU_ID1", /* 130 */ + "", + "", + "QLINK0_REQ", + "QLINK0_EN", + "QLINK0_WMSS_RESET_L", + "QLINK1_REQ", + "QLINK1_EN", + "QLINK1_WMSS_RESET_L", + "FORCED_USB_BOOT_POL", + + "", /* 140 */ + "P_SENSOR_INT_L", + "AP_EC_INT_L", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA_0", + "WCD_SWR_TX_DATA_1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA_0", + "WCD_SWR_RX_DATA_1", + + "", /* 150 */ + "", + "", + "", + "", + "", + "", + "", + "WCD_SWR_TX_DATA_2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "SENS_UART_TXD", + "SENS_UART_RXD", + "", + "", + ""; + + /* + * pinctrl settings for pins that have no real owners. + */ + pinctrl-names = "default"; + pinctrl-0 = <&bios_flash_wp_l>; + + amp_en: amp-en { + pins = "gpio57"; + function = "gpio"; + bias-pull-down; + }; + + ap_ec_int_l: ap-ec-int-l { + pins = "gpio142"; + input-enable; + bias-pull-up; + }; + + bios_flash_wp_l: bios-flash-wp-l { + pins = "gpio93"; + function = "gpio"; + input-enable; + bias-disable; + }; + + bt_en: bt-en { + pins = "gpio85"; + function = "gpio"; + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + en_fp_rails: en-fp-rails { + pins = "gpio42"; + drive-strength = <2>; + output-high; + bias-disable; + }; + + en_pp3300_codec: en-pp3300-codec { + pins = "gpio67"; + drive-strength = <2>; + bias-disable; + }; + + en_pp3300_dx_edp: en-pp3300-dx-edp { + pins = "gpio80"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; + + en_pp3300_hub: en-pp3300-hub { + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; + + fp_to_ap_irq_l: fp-to-ap-irq-l { + pins = "gpio61"; + function = "gpio"; + input-enable; + /* Has external pullup */ + bias-disable; + }; + + h1_ap_int_odl: h1-ap-int-odl { + pins = "gpio54"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + hp_irq: hp-irq { + pins = "gpio101"; + function = "gpio"; + bias-pull-up; + }; + + p_sensor_int_l: p-sensor-int-l { + pins = "gpio141"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + pen_irq_l: pen-irq-l { + pins = "gpio43"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + pen_pdct_l: pen-pdct-l { + pins = "gpio39"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + qup_spi8_cs_gpio_init_high: qup-spi8-cs-gpio-init-high { + pins = "gpio35"; + output-high; + }; + + qup_spi11_cs_gpio_init_high: qup-spi11-cs-gpio-init-high { + pins = "gpio47"; + output-high; + }; + + qup_spi12_cs_gpio_init_high: qup-spi12-cs-gpio-init-high { + pins = "gpio51"; + output-high; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + tp_int_odl: tp-int-odl { + pins = "gpio102"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + }; + + ts_int_l: ts-int-l { + pins = "gpio81"; + function = "gpio"; + /* Has external pullup */ + bias-pull-up; + }; + + ts_reset_l: ts-reset-l { + pins = "gpio105"; + function = "gpio"; + /* Has external pullup */ + bias-disable; + drive-strength = <2>; + }; + + uf_cam_en: uf-cam-en { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; + + wf_cam_en: wf-cam-en { + pins = "gpio7"; + function = "gpio"; + drive-strength = <2>; + /* Has external pulldown */ + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index 64fc22aff33d..9b991ba5daaf 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -61,6 +61,18 @@ modem-init; }; +&pmk8350_rtc { + status = "okay"; +}; + +&nvme_pwren { + pins = "gpio19"; +}; + +&nvme_3v3_regulator { + gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>; +}; + &pmk8350_vadc { pmr735a_die_temp { reg = <PMR735A_ADC7_DIE_TEMP>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 371a2a9dcf7a..d623d71d8bd4 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -7,11 +7,96 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/input/linux-event-codes.h> #include "sc7280.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" #include "pmk8350.dtsi" +/ { + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&key_vol_up_default>; + + volume-up { + label = "volume_up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + gpio-key,wakeup; + debounce-interval = <15>; + linux,can-disable; + }; + }; + + nvme_3v3_regulator: nvme-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VLDO_3V3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&nvme_pwren>; + }; +}; + +/* + * Reserved memory changes + * + * Delete all unused memory nodes and define the peripheral memory regions + * required by the board dts. + * + */ + +/delete-node/ &hyp_mem; +/delete-node/ &xbl_mem; +/delete-node/ &reserved_xbl_uefi_log; +/delete-node/ &sec_apps_mem; + +/* Increase the size from 2.5MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x9c900000 0x0 0x800000>; +}; + +/ { + reserved-memory { + adsp_mem: memory@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + camera_mem: memory@8ad00000 { + reg = <0x0 0x8ad00000 0x0 0x500000>; + no-map; + }; + + venus_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + + mpss_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: memory@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + mba_mem: memory@9c700000 { + reg = <0x0 0x9c700000 0x0 0x200000>; + no-map; + }; + }; +}; + &apps_rsc { pm7325-regulators { compatible = "qcom,pm7325-rpmh-regulators"; @@ -199,6 +284,23 @@ modem-init; }; +&pcie1 { + status = "okay"; + perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&nvme_3v3_regulator>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>; +}; + +&pcie1_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l10c_0p8>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + &pmk8350_vadc { pmk8350_die_temp { reg = <PMK8350_ADC7_DIE_TEMP>; @@ -207,10 +309,39 @@ }; }; +&qfprom { + vcc-supply = <&vreg_l1c_1p8>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <37500000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_mpss { + status = "okay"; + compatible = "qcom,sc7280-mss-pil"; + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; + memory-region = <&mba_mem &mpss_mem>; +}; + &sdhc_1 { status = "okay"; @@ -240,6 +371,7 @@ }; &uart5 { + compatible = "qcom,geni-debug-uart"; status = "okay"; }; @@ -282,20 +414,146 @@ vdda18-supply = <&vreg_l1c_1p8>; }; +&uart7 { + status = "okay"; + + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; +}; + /* PINCTRL - additions to nodes defined in sc7280.dtsi */ -&qup_uart5_default { - tx { - pins = "gpio46"; - drive-strength = <2>; +&pm7325_gpios { + key_vol_up_default: key-vol-up-default { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + qcom,drive-strength = <3>; + }; +}; + +&qspi_cs0 { + bias-disable; +}; + +&qspi_clk { + bias-disable; +}; + +&qspi_data01 { + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_uart7_cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&tlmm { + nvme_pwren: nvme-pwren { + function = "gpio"; + }; + + pcie1_reset_n: pcie1-reset-n { + pins = "gpio2"; + function = "gpio"; + + drive-strength = <16>; + output-low; bias-disable; }; - rx { - pins = "gpio47"; + pcie1_wake_n: pcie1-wake-n { + pins = "gpio3"; + function = "gpio"; + drive-strength = <2>; bias-pull-up; }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; }; &sdc1_on { @@ -336,6 +594,7 @@ }; sd-cd { + pins = "gpio91"; bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts index 1fc2addc8ab6..3ae99697d893 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts @@ -21,3 +21,11 @@ stdout-path = "serial0:115200n8"; }; }; + +&nvme_pwren { + pins = "gpio51"; +}; + +&nvme_3v3_regulator { + gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index fd78f16181dd..365a2e04e285 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -5,12 +5,14 @@ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,dispcc-sc7280.h> #include <dt-bindings/clock/qcom,gcc-sc7280.h> +#include <dt-bindings/clock/qcom,gpucc-sc7280.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,videocc-sc7280.h> #include <dt-bindings/interconnect/qcom,sc7280.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> -#include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/reset/qcom,sdm845-pdc.h> @@ -26,8 +28,40 @@ chosen { }; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; mmc1 = &sdhc_1; mmc2 = &sdhc_2; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; }; clocks { @@ -49,6 +83,16 @@ #size-cells = <2>; ranges; + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x200000>; + no-map; + }; + aop_mem: memory@80800000 { reg = <0x0 0x80800000 0x0 0x60000>; no-map; @@ -60,6 +104,16 @@ no-map; }; + reserved_xbl_uefi_log: memory@80880000 { + reg = <0x0 0x80884000 0x0 0x10000>; + no-map; + }; + + sec_apps_mem: memory@808ff000 { + reg = <0x0 0x808ff000 0x0 0x1000>; + no-map; + }; + smem_mem: memory@80900000 { reg = <0x0 0x80900000 0x0 0x200000>; no-map; @@ -70,10 +124,24 @@ reg = <0x0 0x80b00000 0x0 0x100000>; }; + wlan_fw_mem: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0xc00000>; + no-map; + }; + ipa_fw_mem: memory@8b700000 { reg = <0 0x8b700000 0 0x10000>; no-map; }; + + rmtfs_mem: memory@9c900000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9c900000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; }; cpus { @@ -219,6 +287,42 @@ }; }; + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + idle-states { entry-method = "psci"; @@ -415,6 +519,49 @@ method = "smc"; }; + qspi_opp_table: qspi-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qup_opp_table: qup-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -517,22 +664,857 @@ qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x009c0000 0 0x2000>; - clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; #address-cells = <2>; #size-cells = <2>; ranges; + iommus = <&apps_smmu 0x123 0x0>; status = "disabled"; - uart5: serial@994000 { - compatible = "qcom,geni-debug-uart"; + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_data_clk>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart0: serial@980000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, <&qup_uart0_tx>, <&qup_uart0_rx>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_data_clk>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart1: serial@984000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_data_clk>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, <&qup_uart2_tx>, <&qup_uart2_rx>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_data_clk>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart3: serial@98c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, <&qup_uart3_tx>, <&qup_uart3_rx>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_data_clk>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart4: serial@990000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, <&qup_uart4_tx>, <&qup_uart4_rx>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_data_clk>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; pinctrl-names = "default"; - pinctrl-0 = <&qup_uart5_default>; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart5: serial@994000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart6: serial@998000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, <&qup_uart6_tx>, <&qup_uart6_rx>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_data_clk>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart7: serial@99c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, <&qup_uart7_tx>, <&qup_uart7_rx>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x43 0x0>; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_data_clk>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, <&qup_uart8_tx>, <&qup_uart8_rx>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_data_clk>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, <&qup_uart9_tx>, <&qup_uart9_rx>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_data_clk>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, <&qup_uart10_tx>, <&qup_uart10_rx>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_data_clk>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart11_cts>, <&qup_uart11_rts>, <&qup_uart11_tx>, <&qup_uart11_rx>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_data_clk>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, <&qup_uart12_tx>, <&qup_uart12_rx>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart13: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, <&qup_uart13_tx>, <&qup_uart13_rx>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart14: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, <&qup_uart14_tx>, <&qup_uart14_rx>; + interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_data_clk>; + interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart15: serial@a9c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, <&qup_uart15_tx>, <&qup_uart15_rx>; + interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; }; @@ -586,6 +1568,117 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sc7280"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_lane 0>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_CLK>; + + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc GCC_PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_clkreq_n>; + + iommus = <&apps_smmu 0x1c80 0x1>; + + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_EN>, + <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: lanes@1c0e200 { + reg = <0 0x01c0e200 0 0x170>, + <0 0x01c0e400 0 0x200>, + <0 0x01c0ea00 0 0x1f0>, + <0 0x01c0e600 0 0x170>, + <0 0x01c0e800 0 0x200>, + <0 0x01c0ee00 0 0xf4>; + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + #clock-cells = <1>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + ipa: ipa@1e40000 { compatible = "qcom,sc7280-ipa"; @@ -598,8 +1691,8 @@ "ipa-shared", "gsi"; - interrupts-extended = <&intc 0 654 IRQ_TYPE_EDGE_RISING>, - <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ipa", @@ -629,6 +1722,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sc7280-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0x30000>; + }; + lpasscc: lpasscc@3000000 { compatible = "qcom,sc7280-lpasscc"; reg = <0 0x03000000 0 0x40>, @@ -647,6 +1745,86 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-635.0", "qcom,adreno"; + #stream-id-cells = <16>; + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>, + <0 0x03d61000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&adreno_smmu 0 0x401>; + operating-points-v2 = <&gpu_opp_table>; + qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + #cooling-cells = <2>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <1804000>; + }; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <4068000>; + }; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <6832000>; + }; + }; + }; + + gmu: gmu@3d69000 { + compatible="qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; + reg = <0 0x03d6a000 0 0x34000>, + <0 0x3de0000 0 0x10000>, + <0 0x0b290000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc 5>, + <&gpucc 8>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc 2>, + <&gpucc 15>, + <&gpucc 11>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + power-domains = <&gpucc 0>, + <&gpucc 1>; + power-domain-names = "cx", + "gx"; + iommus = <&adreno_smmu 5 0x400>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + gpucc: clock-controller@3d90000 { compatible = "qcom,sc7280-gpucc"; reg = <0 0x03d90000 0 0x9000>; @@ -661,6 +1839,95 @@ #power-domain-cells = <1>; }; + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc 2>, + <&gpucc 11>, + <&gpucc 5>, + <&gpucc 15>, + <&gpucc 13>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + + power-domains = <&gpucc 0>; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc7280-mpss-pas"; + reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_OFFLINE_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&rpmhcc RPMH_PKA_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "offline", "snoc_axi", "pka", "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MSS>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>; + qcom,ext-regs = <&tcsr 0x10000 0x10004 &tcsr_mutex 0x26004 0x26008>; + qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x06002000 0 0x1000>, @@ -1258,15 +2525,11 @@ dp_phy: dp-phy@88ea200 { reg = <0 0x088ea200 0 0x200>, <0 0x088ea400 0 0x200>, - <0 0x088eac00 0 0x400>, + <0 0x088eaa00 0 0x200>, <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>, - <0 0x088eaa00 0 0x100>; + <0 0x088ea800 0 0x200>; #phy-cells = <0>; #clock-cells = <1>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; }; }; @@ -1318,6 +2581,23 @@ }; }; + qspi: spi@88dc000 { + compatible = "qcom,sc7280-qspi", "qcom,qspi-v1"; + reg = <0 0x088dc000 0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", "core"; + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &cnoc2 SLAVE_QSPI_0 0>; + interconnect-names = "qspi-config"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qspi_opp_table>; + status = "disabled"; + }; + dc_noc: interconnect@90e0000 { reg = <0 0x090e0000 0 0x5080>; compatible = "qcom,sc7280-dc-noc"; @@ -1473,7 +2753,7 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sc7280-aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -1481,7 +2761,11 @@ IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; spmi_bus: spmi@c440000 { @@ -1513,11 +2797,518 @@ gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; - qup_uart5_default: qup-uart5-default { - pins = "gpio46", "gpio47"; + pcie1_clkreq_n: pcie1-clkreq-n { + pins = "gpio79"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + qspi_clk: qspi-clk { + pins = "gpio14"; + function = "qspi_clk"; + }; + + qspi_cs0: qspi-cs0 { + pins = "gpio15"; + function = "qspi_cs"; + }; + + qspi_cs1: qspi-cs1 { + pins = "gpio19"; + function = "qspi_cs"; + }; + + qspi_data01: qspi-data01 { + pins = "gpio12", "gpio13"; + function = "qspi_data"; + }; + + qspi_data12: qspi-data12 { + pins = "gpio16", "gpio17"; + function = "qspi_data"; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk { + pins = "gpio0", "gpio1"; + function = "qup00"; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk { + pins = "gpio4", "gpio5"; + function = "qup01"; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk { + pins = "gpio8", "gpio9"; + function = "qup02"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk { + pins = "gpio12", "gpio13"; + function = "qup03"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk { + pins = "gpio16", "gpio17"; + function = "qup04"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk { + pins = "gpio20", "gpio21"; + function = "qup05"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk { + pins = "gpio24", "gpio25"; + function = "qup06"; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk { + pins = "gpio28", "gpio29"; + function = "qup07"; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk { + pins = "gpio32", "gpio33"; + function = "qup10"; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk { + pins = "gpio36", "gpio37"; + function = "qup11"; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk { + pins = "gpio40", "gpio41"; + function = "qup12"; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk { + pins = "gpio44", "gpio45"; + function = "qup13"; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk { + pins = "gpio48", "gpio49"; + function = "qup14"; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk { + pins = "gpio52", "gpio53"; + function = "qup15"; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk { + pins = "gpio56", "gpio57"; + function = "qup16"; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk { + pins = "gpio60", "gpio61"; + function = "qup17"; + }; + + qup_spi0_data_clk: qup-spi0-data-clk { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup00"; + }; + + qup_spi0_cs: qup-spi0-cs { + pins = "gpio3"; + function = "qup00"; + }; + + qup_spi0_cs_gpio: qup-spi0-cs-gpio { + pins = "gpio3"; + function = "gpio"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk { + pins = "gpio4", "gpio5", "gpio6"; + function = "qup01"; + }; + + qup_spi1_cs: qup-spi1-cs { + pins = "gpio7"; + function = "qup01"; + }; + + qup_spi1_cs_gpio: qup-spi1-cs-gpio { + pins = "gpio7"; + function = "gpio"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk { + pins = "gpio8", "gpio9", "gpio10"; + function = "qup02"; + }; + + qup_spi2_cs: qup-spi2-cs { + pins = "gpio11"; + function = "qup02"; + }; + + qup_spi2_cs_gpio: qup-spi2-cs-gpio { + pins = "gpio11"; + function = "gpio"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk { + pins = "gpio12", "gpio13", "gpio14"; + function = "qup03"; + }; + + qup_spi3_cs: qup-spi3-cs { + pins = "gpio15"; + function = "qup03"; + }; + + qup_spi3_cs_gpio: qup-spi3-cs-gpio { + pins = "gpio15"; + function = "gpio"; + }; + + qup_spi4_data_clk: qup-spi4-data-clk { + pins = "gpio16", "gpio17", "gpio18"; + function = "qup04"; + }; + + qup_spi4_cs: qup-spi4-cs { + pins = "gpio19"; + function = "qup04"; + }; + + qup_spi4_cs_gpio: qup-spi4-cs-gpio { + pins = "gpio19"; + function = "gpio"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk { + pins = "gpio20", "gpio21", "gpio22"; + function = "qup05"; + }; + + qup_spi5_cs: qup-spi5-cs { + pins = "gpio23"; + function = "qup05"; + }; + + qup_spi5_cs_gpio: qup-spi5-cs-gpio { + pins = "gpio23"; + function = "gpio"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk { + pins = "gpio24", "gpio25", "gpio26"; + function = "qup06"; + }; + + qup_spi6_cs: qup-spi6-cs { + pins = "gpio27"; + function = "qup06"; + }; + + qup_spi6_cs_gpio: qup-spi6-cs-gpio { + pins = "gpio27"; + function = "gpio"; + }; + + qup_spi7_data_clk: qup-spi7-data-clk { + pins = "gpio28", "gpio29", "gpio30"; + function = "qup07"; + }; + + qup_spi7_cs: qup-spi7-cs { + pins = "gpio31"; + function = "qup07"; + }; + + qup_spi7_cs_gpio: qup-spi7-cs-gpio { + pins = "gpio31"; + function = "gpio"; + }; + + qup_spi8_data_clk: qup-spi8-data-clk { + pins = "gpio32", "gpio33", "gpio34"; + function = "qup10"; + }; + + qup_spi8_cs: qup-spi8-cs { + pins = "gpio35"; + function = "qup10"; + }; + + qup_spi8_cs_gpio: qup-spi8-cs-gpio { + pins = "gpio35"; + function = "gpio"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk { + pins = "gpio36", "gpio37", "gpio38"; + function = "qup11"; + }; + + qup_spi9_cs: qup-spi9-cs { + pins = "gpio39"; + function = "qup11"; + }; + + qup_spi9_cs_gpio: qup-spi9-cs-gpio { + pins = "gpio39"; + function = "gpio"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk { + pins = "gpio40", "gpio41", "gpio42"; + function = "qup12"; + }; + + qup_spi10_cs: qup-spi10-cs { + pins = "gpio43"; + function = "qup12"; + }; + + qup_spi10_cs_gpio: qup-spi10-cs-gpio { + pins = "gpio43"; + function = "gpio"; + }; + + qup_spi11_data_clk: qup-spi11-data-clk { + pins = "gpio44", "gpio45", "gpio46"; function = "qup13"; }; + qup_spi11_cs: qup-spi11-cs { + pins = "gpio47"; + function = "qup13"; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio { + pins = "gpio47"; + function = "gpio"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk { + pins = "gpio48", "gpio49", "gpio50"; + function = "qup14"; + }; + + qup_spi12_cs: qup-spi12-cs { + pins = "gpio51"; + function = "qup14"; + }; + + qup_spi12_cs_gpio: qup-spi12-cs-gpio { + pins = "gpio51"; + function = "gpio"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk { + pins = "gpio52", "gpio53", "gpio54"; + function = "qup15"; + }; + + qup_spi13_cs: qup-spi13-cs { + pins = "gpio55"; + function = "qup15"; + }; + + qup_spi13_cs_gpio: qup-spi13-cs-gpio { + pins = "gpio55"; + function = "gpio"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk { + pins = "gpio56", "gpio57", "gpio58"; + function = "qup16"; + }; + + qup_spi14_cs: qup-spi14-cs { + pins = "gpio59"; + function = "qup16"; + }; + + qup_spi14_cs_gpio: qup-spi14-cs-gpio { + pins = "gpio59"; + function = "gpio"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk { + pins = "gpio60", "gpio61", "gpio62"; + function = "qup17"; + }; + + qup_spi15_cs: qup-spi15-cs { + pins = "gpio63"; + function = "qup17"; + }; + + qup_spi15_cs_gpio: qup-spi15-cs-gpio { + pins = "gpio63"; + function = "gpio"; + }; + + qup_uart0_cts: qup-uart0-cts { + pins = "gpio0"; + function = "qup00"; + }; + + qup_uart0_rts: qup-uart0-rts { + pins = "gpio1"; + function = "qup00"; + }; + + qup_uart0_tx: qup-uart0-tx { + pins = "gpio2"; + function = "qup00"; + }; + + qup_uart0_rx: qup-uart0-rx { + pins = "gpio3"; + function = "qup00"; + }; + + qup_uart1_cts: qup-uart1-cts { + pins = "gpio4"; + function = "qup01"; + }; + + qup_uart1_rts: qup-uart1-rts { + pins = "gpio5"; + function = "qup01"; + }; + + qup_uart1_tx: qup-uart1-tx { + pins = "gpio6"; + function = "qup01"; + }; + + qup_uart1_rx: qup-uart1-rx { + pins = "gpio7"; + function = "qup01"; + }; + + qup_uart2_cts: qup-uart2-cts { + pins = "gpio8"; + function = "qup02"; + }; + + qup_uart2_rts: qup-uart2-rts { + pins = "gpio9"; + function = "qup02"; + }; + + qup_uart2_tx: qup-uart2-tx { + pins = "gpio10"; + function = "qup02"; + }; + + qup_uart2_rx: qup-uart2-rx { + pins = "gpio11"; + function = "qup02"; + }; + + qup_uart3_cts: qup-uart3-cts { + pins = "gpio12"; + function = "qup03"; + }; + + qup_uart3_rts: qup-uart3-rts { + pins = "gpio13"; + function = "qup03"; + }; + + qup_uart3_tx: qup-uart3-tx { + pins = "gpio14"; + function = "qup03"; + }; + + qup_uart3_rx: qup-uart3-rx { + pins = "gpio15"; + function = "qup03"; + }; + + qup_uart4_cts: qup-uart4-cts { + pins = "gpio16"; + function = "qup04"; + }; + + qup_uart4_rts: qup-uart4-rts { + pins = "gpio17"; + function = "qup04"; + }; + + qup_uart4_tx: qup-uart4-tx { + pins = "gpio18"; + function = "qup04"; + }; + + qup_uart4_rx: qup-uart4-rx { + pins = "gpio19"; + function = "qup04"; + }; + + qup_uart5_cts: qup-uart5-cts { + pins = "gpio20"; + function = "qup05"; + }; + + qup_uart5_rts: qup-uart5-rts { + pins = "gpio21"; + function = "qup05"; + }; + + qup_uart5_tx: qup-uart5-tx { + pins = "gpio22"; + function = "qup05"; + }; + + qup_uart5_rx: qup-uart5-rx { + pins = "gpio23"; + function = "qup05"; + }; + + qup_uart6_cts: qup-uart6-cts { + pins = "gpio24"; + function = "qup06"; + }; + + qup_uart6_rts: qup-uart6-rts { + pins = "gpio25"; + function = "qup06"; + }; + + qup_uart6_tx: qup-uart6-tx { + pins = "gpio26"; + function = "qup06"; + }; + + qup_uart6_rx: qup-uart6-rx { + pins = "gpio27"; + function = "qup06"; + }; + + qup_uart7_cts: qup-uart7-cts { + pins = "gpio28"; + function = "qup07"; + }; + + qup_uart7_rts: qup-uart7-rts { + pins = "gpio29"; + function = "qup07"; + }; + + qup_uart7_tx: qup-uart7-tx { + pins = "gpio30"; + function = "qup07"; + }; + + qup_uart7_rx: qup-uart7-rx { + pins = "gpio31"; + function = "qup07"; + }; + sdc1_on: sdc1-on { clk { pins = "sdc1_clk"; @@ -1573,10 +3364,6 @@ data { pins = "sdc2_data"; }; - - sd-cd { - pins = "gpio91"; - }; }; sdc2_off: sdc2-off { @@ -1598,6 +3385,181 @@ bias-bus-hold; }; }; + + qup_uart8_cts: qup-uart8-cts { + pins = "gpio32"; + function = "qup10"; + }; + + qup_uart8_rts: qup-uart8-rts { + pins = "gpio33"; + function = "qup10"; + }; + + qup_uart8_tx: qup-uart8-tx { + pins = "gpio34"; + function = "qup10"; + }; + + qup_uart8_rx: qup-uart8-rx { + pins = "gpio35"; + function = "qup10"; + }; + + qup_uart9_cts: qup-uart9-cts { + pins = "gpio36"; + function = "qup11"; + }; + + qup_uart9_rts: qup-uart9-rts { + pins = "gpio37"; + function = "qup11"; + }; + + qup_uart9_tx: qup-uart9-tx { + pins = "gpio38"; + function = "qup11"; + }; + + qup_uart9_rx: qup-uart9-rx { + pins = "gpio39"; + function = "qup11"; + }; + + qup_uart10_cts: qup-uart10-cts { + pins = "gpio40"; + function = "qup12"; + }; + + qup_uart10_rts: qup-uart10-rts { + pins = "gpio41"; + function = "qup12"; + }; + + qup_uart10_tx: qup-uart10-tx { + pins = "gpio42"; + function = "qup12"; + }; + + qup_uart10_rx: qup-uart10-rx { + pins = "gpio43"; + function = "qup12"; + }; + + qup_uart11_cts: qup-uart11-cts { + pins = "gpio44"; + function = "qup13"; + }; + + qup_uart11_rts: qup-uart11-rts { + pins = "gpio45"; + function = "qup13"; + }; + + qup_uart11_tx: qup-uart11-tx { + pins = "gpio46"; + function = "qup13"; + }; + + qup_uart11_rx: qup-uart11-rx { + pins = "gpio47"; + function = "qup13"; + }; + + qup_uart12_cts: qup-uart12-cts { + pins = "gpio48"; + function = "qup14"; + }; + + qup_uart12_rts: qup-uart12-rts { + pins = "gpio49"; + function = "qup14"; + }; + + qup_uart12_tx: qup-uart12-tx { + pins = "gpio50"; + function = "qup14"; + }; + + qup_uart12_rx: qup-uart12-rx { + pins = "gpio51"; + function = "qup14"; + }; + + qup_uart13_cts: qup-uart13-cts { + pins = "gpio52"; + function = "qup15"; + }; + + qup_uart13_rts: qup-uart13-rts { + pins = "gpio53"; + function = "qup15"; + }; + + qup_uart13_tx: qup-uart13-tx { + pins = "gpio54"; + function = "qup15"; + }; + + qup_uart13_rx: qup-uart13-rx { + pins = "gpio55"; + function = "qup15"; + }; + + qup_uart14_cts: qup-uart14-cts { + pins = "gpio56"; + function = "qup16"; + }; + + qup_uart14_rts: qup-uart14-rts { + pins = "gpio57"; + function = "qup16"; + }; + + qup_uart14_tx: qup-uart14-tx { + pins = "gpio58"; + function = "qup16"; + }; + + qup_uart14_rx: qup-uart14-rx { + pins = "gpio59"; + function = "qup16"; + }; + + qup_uart15_cts: qup-uart15-cts { + pins = "gpio60"; + function = "qup17"; + }; + + qup_uart15_rts: qup-uart15-rts { + pins = "gpio61"; + function = "qup17"; + }; + + qup_uart15_tx: qup-uart15-tx { + pins = "gpio62"; + function = "qup17"; + }; + + qup_uart15_rx: qup-uart15-rx { + pins = "gpio63"; + function = "qup17"; + }; + }; + + imem@146a5000 { + compatible = "qcom,sc7280-imem", "syscon"; + reg = <0 0x146a5000 0 0x6000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146a5000 0x6000>; + + pil-reloc@594c { + compatible = "qcom,pil-reloc-info"; + reg = <0x594c 0xc8>; + }; }; apps_smmu: iommu@15000000 { @@ -2471,16 +4433,16 @@ }; gpuss0-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <100>; polling-delay = <0>; thermal-sensors = <&tsens1 1>; trips { gpuss0_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss0_crit: gpuss0-crit { @@ -2489,19 +4451,26 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpuss1-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <100>; polling-delay = <0>; thermal-sensors = <&tsens1 2>; trips { gpuss1_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss1_crit: gpuss1-crit { @@ -2510,6 +4479,13 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; nspss0-thermal { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts index a4e1fb8ca52d..71b448978e88 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts @@ -11,6 +11,7 @@ / { model = "Sony Xperia 10"; compatible = "sony,kirin-row", "qcom,sdm630"; + chassis-type = "handset"; chosen { framebuffer@9d400000 { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts index c574e430ba67..dd484a9bc7cd 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts @@ -11,4 +11,5 @@ / { model = "Sony Xperia XA2 Ultra"; compatible = "sony,discovery-row", "qcom,sdm630"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts index a93ff3ab1b6d..2da83cd41187 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts @@ -11,4 +11,5 @@ / { model = "Sony Xperia XA2"; compatible = "sony,pioneer-row", "qcom,sdm630"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts index 59a679c205e0..a679d4acee29 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts @@ -11,6 +11,7 @@ / { model = "Sony Xperia XA2 Plus"; compatible = "sony,voyager-row", "qcom,sdm630"; + chassis-type = "handset"; chosen { framebuffer@9d400000 { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 849900e8b80e..11d0a8c1cf35 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -308,7 +308,7 @@ regulator-allow-set-load; }; - vreg_l4b_29p5: l4 { + vreg_l4b_2p95: l4 { regulator-min-microvolt = <2944000>; regulator-max-microvolt = <2952000>; regulator-enable-ramp-delay = <250>; @@ -327,7 +327,7 @@ * Tighten the range to 1.8-3.328 (closest to 3.3) to * make the mmc driver happy. */ - vreg_l5b_29p5: l5 { + vreg_l5b_2p95: l5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3328000>; regulator-enable-ramp-delay = <250>; @@ -559,14 +559,14 @@ mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; - vmmc-supply = <&vreg_l4b_29p5>; + vmmc-supply = <&vreg_l4b_2p95>; vqmmc-supply = <&vreg_l8a_1p8>; }; &sdhc_2 { status = "okay"; - vmmc-supply = <&vreg_l5b_29p5>; + vmmc-supply = <&vreg_l5b_2p95>; vqmmc-supply = <&vreg_l2b_2p95>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 9c7f87e42fcc..3e0165bb61c5 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -541,7 +541,7 @@ <&sleep_clk>; }; - rpm_msg_ram: memory@778000 { + rpm_msg_ram: sram@778000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00778000 0x7000>; }; @@ -1176,6 +1176,11 @@ status = "disabled"; }; + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + spmi_bus: spmi@800f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0800f000 0x1000>, @@ -2020,6 +2025,57 @@ }; }; + venus: video-codec@cc00000 { + compatible = "qcom,sdm660-venus"; + reg = <0x0cc00000 0xff000>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc THROTTLE_VIDEO_AXI_CLK>; + clock-names = "core", "iface", "bus", "bus_throttle"; + interconnects = <&gnoc 0 &mnoc 13>, + <&mnoc 4 &bimc 5>; + interconnect-names = "cpu-cfg", "video-mem"; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&mmss_smmu 0x400>, + <&mmss_smmu 0x401>, + <&mmss_smmu 0x40a>, + <&mmss_smmu 0x407>, + <&mmss_smmu 0x40e>, + <&mmss_smmu 0x40f>, + <&mmss_smmu 0x408>, + <&mmss_smmu 0x409>, + <&mmss_smmu 0x40b>, + <&mmss_smmu 0x40c>, + <&mmss_smmu 0x40d>, + <&mmss_smmu 0x410>, + <&mmss_smmu 0x421>, + <&mmss_smmu 0x428>, + <&mmss_smmu 0x429>, + <&mmss_smmu 0x42b>, + <&mmss_smmu 0x42c>, + <&mmss_smmu 0x42d>, + <&mmss_smmu 0x411>, + <&mmss_smmu 0x431>; + memory-region = <&venus_region>; + power-domains = <&mmcc VENUS_GDSC>; + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + }; + mmss_smmu: iommu@cd00000 { compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; reg = <0x0cd00000 0x40000>; diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts index 3e677fb7cfea..1edc53fd6941 100644 --- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts @@ -10,6 +10,7 @@ / { model = "Xiaomi Redmi Note 7"; compatible = "xiaomi,lavender", "qcom,sdm660"; + chassis-type = "handset"; aliases { serial0 = &blsp1_uart2; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index dfd1b42c07fd..4a6285a25f77 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -5,7 +5,6 @@ * Copyright 2018 Google LLC. */ -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" @@ -616,6 +615,14 @@ ap_ts_i2c: &i2c14 { }; }; +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + &ipa { status = "okay"; modem-init; @@ -629,10 +636,6 @@ ap_ts_i2c: &i2c14 { status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - /* * Cheza fw does not properly program the GPU aperture to allow the * GPU to update the SMMU pagetables for context switches. Work @@ -643,6 +646,8 @@ ap_ts_i2c: &i2c14 { }; &mss_pil { + status = "okay"; + iommus = <&apps_smmu 0x781 0x0>, <&apps_smmu 0x724 0x3>; }; @@ -1317,6 +1322,8 @@ ap_ts_i2c: &i2c14 { }; &venus { + status = "okay"; + video-firmware { iommus = <&apps_smmu 0x10b2 0x0>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 2d5533dd4ec2..13f80a0b6faa 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -5,7 +5,6 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> @@ -17,6 +16,8 @@ / { model = "Thundercomm Dragonboard 845c"; compatible = "thundercomm,db845c", "qcom,sdm845"; + qcom,msm-id = <341 0x20001>; + qcom,board-id = <8 0>; aliases { serial0 = &uart9; @@ -420,7 +421,12 @@ <GCC_LPASS_SWAY_CLK>; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sdm845/a630_zap.mbn"; @@ -485,10 +491,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; @@ -999,6 +1001,10 @@ vdda-pll-supply = <&vreg_l26a_1p2>; }; +&venus { + status = "okay"; +}; + &wcd9340{ pinctrl-0 = <&wcd_intr_default>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 52dd7a858231..5e6e8f4fb5be 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -7,7 +7,6 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" @@ -361,9 +360,6 @@ qcom,dual-dsi-mode; qcom,master-dsi; - #address-cells = <1>; - #size-cells = <0>; - ports { port@1 { endpoint { @@ -439,7 +435,13 @@ <GCC_LPASS_SWAY_CLK>; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; + zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sdm845/a630_zap.mbn"; @@ -460,10 +462,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; @@ -566,6 +564,10 @@ vdda-pll-supply = <&vdda_usb2_ss_core>; }; +&venus { + status = "okay"; +}; + &wifi { status = "okay"; vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index d4355522374a..3e04aeb479d1 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -7,7 +7,6 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> @@ -93,7 +92,6 @@ console-size = <0x40000>; ftrace-size = <0x40000>; pmsg-size = <0x200000>; - devinfo-size = <0x1000>; ecc-size = <16>; }; }; @@ -248,6 +246,12 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vdda_qusb_hs0_3p1: vreg_l24a_3p075: ldo24 { regulator-min-microvolt = <3088000>; @@ -315,9 +319,6 @@ status = "okay"; vdda-supply = <&vdda_mipi_dsi0_1p2>; - #address-cells = <1>; - #size-cells = <0>; - /* * Both devices use different panels but all other properties * are common. Compatible line is declared in device dts. @@ -362,7 +363,13 @@ <GCC_LPASS_SWAY_CLK>; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; + zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; @@ -415,10 +422,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - /* Modem/wifi*/ &mss_pil { status = "okay"; @@ -641,12 +644,17 @@ }; }; +&venus { + status = "okay"; +}; + &wifi { status = "okay"; vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; qcom,snoc-host-cap-8bit-quirk; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index 72842c887617..73493079d13e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -10,6 +10,7 @@ / { model = "OnePlus 6"; compatible = "oneplus,enchilada", "qcom,sdm845"; + chassis-type = "handset"; }; &display_panel { diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index 969b36dc9e2c..b63ebc48f62f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -10,6 +10,7 @@ / { model = "OnePlus 6T"; compatible = "oneplus,fajita", "qcom,sdm845"; + chassis-type = "handset"; }; &display_panel { diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index c60c8c640e17..580d4cc1296f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -2,7 +2,6 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> @@ -29,6 +28,7 @@ / { model = "Xiaomi Pocophone F1"; compatible = "xiaomi,beryllium", "qcom,sdm845"; + chassis-type = "handset"; /* required for bootloader to select correct board */ qcom,board-id = <69 0>; @@ -215,9 +215,6 @@ status = "okay"; vdda-supply = <&vreg_l26a_1p2>; - #address-cells = <1>; - #size-cells = <0>; - panel@0 { compatible = "tianma,fhd-video"; reg = <0>; @@ -256,7 +253,13 @@ <GCC_LPASS_SWAY_CLK>; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; + zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sdm845/a630_zap.mbn"; @@ -284,10 +287,6 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt"; @@ -513,6 +512,10 @@ vdda-pll-supply = <&vreg_l1a_0p875>; }; +&venus { + status = "okay"; +}; + &wcd9340{ pinctrl-0 = <&wcd_intr_default>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index b3b911926184..526087586ba4 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/clock/qcom,lpass-sdm845.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sdm845.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -99,9 +100,11 @@ no-map; }; - smem_mem: memory@86000000 { + smem@86000000 { + compatible = "qcom,smem"; reg = <0x0 0x86000000 0 0x200000>; no-map; + hwlocks = <&tcsr_mutex 3>; }; tz_mem: memory@86200000 { @@ -768,6 +771,8 @@ memory-region = <&adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -867,6 +872,8 @@ memory-region = <&cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&cdsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -941,12 +948,6 @@ #hwlock-cells = <1>; }; - smem { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; - }; - smp2p-cdsp { compatible = "qcom,smp2p"; qcom,smem = <94>, <432>; @@ -1995,10 +1996,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_AUX_CLK>, @@ -2064,7 +2065,7 @@ status = "disabled"; - pcie0_lane: lanes@1c06200 { + pcie0_lane: phy@1c06200 { reg = <0 0x01c06200 0 0x128>, <0 0x01c06400 0 0x1fc>, <0 0x01c06800 0 0x218>, @@ -2100,10 +2101,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, <&gcc GCC_PCIE_1_AUX_CLK>, @@ -2174,7 +2175,7 @@ status = "disabled"; - pcie1_lane: lanes@1c06200 { + pcie1_lane: phy@1c06200 { reg = <0 0x01c0a800 0 0x800>, <0 0x01c0a800 0 0x800>, <0 0x01c0b800 0 0x400>; @@ -2302,7 +2303,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -2312,15 +2313,15 @@ }; }; - cryptobam: dma@1dc4000 { + cryptobam: dma-controller@1dc4000 { compatible = "qcom,bam-v1.7.0"; reg = <0 0x01dc4000 0 0x24000>; interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rpmhcc 15>; + clocks = <&rpmhcc RPMH_CE_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; - qcom,controlled-remotely = <1>; + qcom,controlled-remotely; iommus = <&apps_smmu 0x704 0x1>, <&apps_smmu 0x706 0x1>, <&apps_smmu 0x714 0x1>, @@ -2331,8 +2332,8 @@ compatible = "qcom,crypto-v5.4"; reg = <0 0x01dfa000 0 0x6000>; clocks = <&gcc GCC_CE1_AHB_CLK>, - <&gcc GCC_CE1_AHB_CLK>, - <&rpmhcc 15>; + <&gcc GCC_CE1_AXI_CLK>, + <&rpmhcc RPMH_CE_CLK>; clock-names = "iface", "bus", "core"; dmas = <&cryptobam 6>, <&cryptobam 7>; dma-names = "rx", "tx"; @@ -2984,6 +2985,8 @@ clock-names = "iface", "bus", "mem", "gpll0_mss", "snoc_axi", "mnoc_axi", "prng", "xo"; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2993,11 +2996,12 @@ qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; - power-domains = <&aoss_qmp 2>, - <&rpmhpd SDM845_CX>, + power-domains = <&rpmhpd SDM845_CX>, <&rpmhpd SDM845_MX>, <&rpmhpd SDM845_MSS>; - power-domain-names = "load_state", "cx", "mx", "mss"; + power-domain-names = "cx", "mx", "mss"; + + status = "disabled"; mba { memory-region = <&mba_region>; @@ -3497,8 +3501,9 @@ interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>; - clock-names = "iface", "core"; + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; iommus = <&apps_smmu 0xa0 0xf>; power-domains = <&rpmhpd SDM845_CX>; operating-points-v2 = <&sdhc2_opp_table>; @@ -3646,6 +3651,30 @@ }; }; + lmh_cluster1: lmh@17d70800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d70800 0 0x400>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + lmh_cluster0: lmh@17d78800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d78800 0 0x400>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + sound: sound { }; @@ -3683,7 +3712,6 @@ compatible = "qcom,sdm845-qmp-usb3-phy"; reg = <0 0x088e9000 0 0x18c>, <0 0x088e8000 0 0x10>; - reg-names = "reg-base", "dp_com"; status = "disabled"; #address-cells = <2>; #size-cells = <2>; @@ -3699,7 +3727,7 @@ <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: lanes@88e9200 { + usb_1_ssphy: phy@88e9200 { reg = <0 0x088e9200 0 0x128>, <0 0x088e9400 0 0x200>, <0 0x088e9c00 0 0x218>, @@ -3732,7 +3760,7 @@ <&gcc GCC_USB3_PHY_SEC_BCR>; reset-names = "phy", "common"; - usb_2_ssphy: lane@88eb200 { + usb_2_ssphy: phy@88eb200 { reg = <0 0x088eb200 0 0x128>, <0 0x088eb400 0 0x1fc>, <0 0x088eb800 0 0x218>, @@ -3868,6 +3896,8 @@ <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; interconnect-names = "video-mem", "cpu-cfg"; + status = "disabled"; + video-core0 { compatible = "venus-decoder"; }; @@ -4194,8 +4224,6 @@ interrupt-parent = <&mdss>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ports { #address-cells = <1>; #size-cells = <0>; @@ -4271,6 +4299,9 @@ status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -4340,6 +4371,9 @@ status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -4402,6 +4436,8 @@ interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; + status = "disabled"; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -4497,6 +4533,8 @@ operating-points-v2 = <&gmu_opp_table>; + status = "disabled"; + gmu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -4588,7 +4626,6 @@ mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; cx_cdev: cx { #cooling-cells = <2>; @@ -4917,6 +4954,8 @@ reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; + interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; @@ -4974,23 +5013,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu0_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu0_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu1-thermal { @@ -5018,23 +5040,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu1_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu1_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu2-thermal { @@ -5062,23 +5067,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu2_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu2_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu3-thermal { @@ -5106,23 +5094,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu3_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu3_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu4-thermal { @@ -5150,23 +5121,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu4_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu4_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu5-thermal { @@ -5194,23 +5148,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu5_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu5_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu6-thermal { @@ -5238,23 +5175,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu6_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu6_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu7-thermal { @@ -5282,23 +5202,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu7_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu7_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; aoss0-thermal { diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 2ba23aa582a1..d6b2ba4396f6 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -7,7 +7,6 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> @@ -30,6 +29,7 @@ / { model = "Lenovo Yoga C630"; compatible = "lenovo,yoga-c630", "qcom,sdm845"; + chassis-type = "convertible"; aliases { hsuart0 = &uart6; @@ -264,6 +264,9 @@ }; vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vdda_qusb_hs0_3p1: @@ -341,7 +344,12 @@ <GCC_LPASS_SWAY_CLK>; }; +&gmu { + status = "okay"; +}; + &gpu { + status = "okay"; zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; @@ -458,11 +466,8 @@ status = "okay"; }; -&mdss_mdp { - status = "okay"; -}; - &mss_pil { + status = "okay"; firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn"; }; @@ -649,6 +654,7 @@ vddxo-supply = <&vreg_l7a_1p8>; vddrf-supply = <&vreg_l17a_1p3>; vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; max-speed = <3200000>; }; }; @@ -723,6 +729,10 @@ vdda-pll-supply = <&vdda_usb2_ss_core>; }; +&venus { + status = "okay"; +}; + &wcd9340{ pinctrl-0 = <&wcd_intr_default>; pinctrl-names = "default"; @@ -763,6 +773,7 @@ vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; qcom,snoc-host-cap-8bit-quirk; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index 58b6b2742d3f..45eab0235d66 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -17,6 +17,7 @@ model = "Sony Xperia 10 II"; compatible = "sony,pdx201", "qcom,sm6125"; + chassis-type = "handset"; chosen { #address-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 2b37ce6a9f9c..51286ddbdb10 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -326,8 +326,8 @@ tlmm: pinctrl@500000 { compatible = "qcom,sm6125-tlmm"; reg = <0x00500000 0x400000>, - <0x00900000 0x400000>, - <0x00d00000 0x400000>; + <0x00900000 0x400000>, + <0x00d00000 0x400000>; reg-names = "west", "south", "east"; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; @@ -380,7 +380,7 @@ status = "disabled"; }; - rpm_msg_ram: memory@45f0000 { + rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; reg = <0x045f0000 0x7000>; }; @@ -391,12 +391,12 @@ reg-names = "hc", "core"; interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; clock-names = "iface", "core", "xo"; bus-width = <8>; non-removable; @@ -409,12 +409,12 @@ reg-names = "hc"; interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; clock-names = "iface", "core", "xo"; pinctrl-0 = <&sdc2_state_on>; @@ -433,11 +433,11 @@ ranges; clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -460,13 +460,18 @@ }; }; + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x04690000 0x10000>; + }; + spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x01c40000 0x1100>, - <0x01e00000 0x2000000>, - <0x03e00000 0x100000>, - <0x03f00000 0xa0000>, - <0x01c0a000 0x26000>; + reg = <0x01c40000 0x1100>, + <0x01e00000 0x2000000>, + <0x03e00000 0x100000>, + <0x03f00000 0xa0000>, + <0x01c0a000 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; @@ -494,22 +499,22 @@ reg = <0x0f120000 0x1000>; clock-frequency = <19200000>; - frame@0f121000 { + frame@f121000 { frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>; }; - frame@0f123000 { + frame@f123000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0f123000 0x1000>; status = "disabled"; }; - frame@0f124000 { + frame@f124000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0f124000 0x1000>; @@ -548,7 +553,7 @@ intc: interrupt-controller@f200000 { compatible = "arm,gic-v3"; reg = <0x0f200000 0x20000>, - <0x0f300000 0x100000>; + <0x0f300000 0x100000>; #interrupt-cells = <3>; interrupt-controller; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; @@ -558,9 +563,9 @@ timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 1 0xf08 - GIC_PPI 2 0xf08 - GIC_PPI 3 0xf08 - GIC_PPI 0 0xf08>; + GIC_PPI 2 0xf08 + GIC_PPI 3 0xf08 + GIC_PPI 0 0xf08>; clock-frequency = <19200000>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts new file mode 100644 index 000000000000..36911b9a5c04 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ +/dts-v1/; + +#include "sm6350.dtsi" + +/ { + model = "Sony Xperia 10 III"; + compatible = "sony,pdx213", "qcom,sm6350"; + chassis-type = "handset"; + qcom,msm-id = <434 0x10000>, <459 0x10000>; + qcom,board-id = <0x1000B 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@a0000000 { + compatible = "simple-framebuffer"; + reg = <0 0xa0000000 0 0x2300000>; + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_AXI_CLK>; + }; + }; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + gpio-reserved-ranges = <13 4>, <45 2>, <56 2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + maximum-speed = "super-speed"; + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&usb_1_qmpphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi new file mode 100644 index 000000000000..973e18fe3b67 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -0,0 +1,965 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include <dt-bindings/clock/qcom,gcc-sm6350.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <76800000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <703>; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <703>; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm6350", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0 0x80000000 0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@80700000 { + reg = <0 0x80700000 0 0x160000>; + no-map; + }; + + cmd_db: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0 0x80860000 0 0x20000>; + no-map; + }; + + sec_apps_mem: memory@808ff000 { + reg = <0 0x808ff000 0 0x1000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0 0x80900000 0 0x200000>; + no-map; + }; + + cdsp_sec_mem: memory@80b00000 { + reg = <0 0x80b00000 0 0x1e00000>; + no-map; + }; + + pil_camera_mem: memory@86000000 { + reg = <0 0x86000000 0 0x500000>; + no-map; + }; + + pil_npu_mem: memory@86500000 { + reg = <0 0x86500000 0 0x500000>; + no-map; + }; + + pil_video_mem: memory@86a00000 { + reg = <0 0x86a00000 0 0x500000>; + no-map; + }; + + pil_cdsp_mem: memory@86f00000 { + reg = <0 0x86f00000 0 0x1e00000>; + no-map; + }; + + pil_adsp_mem: memory@88d00000 { + reg = <0 0x88d00000 0 0x2800000>; + no-map; + }; + + wlan_fw_mem: memory@8b500000 { + reg = <0 0x8b500000 0 0x200000>; + no-map; + }; + + pil_ipa_fw_mem: memory@8b700000 { + reg = <0 0x8b700000 0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@8b710000 { + reg = <0 0x8b710000 0 0x5400>; + no-map; + }; + + pil_gpu_mem: memory@8b715400 { + reg = <0 0x8b715400 0 0x2000>; + no-map; + }; + + pil_modem_mem: memory@8b800000 { + reg = <0 0x8b800000 0 0xf800000>; + no-map; + }; + + cont_splash_memory: memory@a0000000 { + reg = <0 0xa0000000 0 0x2300000>; + no-map; + }; + + dfps_data_memory: memory@a2300000 { + reg = <0 0xa2300000 0 0x100000>; + no-map; + }; + + removed_region: memory@c0000000 { + reg = <0 0xc0000000 0 0x3900000>; + no-map; + }; + + debug_region: memory@ffb00000 { + reg = <0 0xffb00000 0 0xc0000>; + no-map; + }; + + last_log_region: memory@ffbc0000 { + reg = <0 0xffbc0000 0 0x40000>; + no-map; + }; + + ramoops: ramoops@ffc00000 { + compatible = "removed-dma-pool", "ramoops"; + reg = <0 0xffc00000 0 0x00100000>; + record-size = <0x1000>; + console-size = <0x40000>; + ftrace-size = <0x0>; + msg-size = <0x20000 0x20000>; + cc-size = <0x0>; + no-map; + }; + + cmdline_region: memory@ffd00000 { + reg = <0 0xffd00000 0 0x1000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm6350"; + reg = <0 0x00100000 0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sm6350-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0 0x00793000 0 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + sdhc_1: sdhci@7c4000 { + compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>, + <0 0x007c8000 0 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&sdhc1_opp_table>; + bus-width = <8>; + non-removable; + supports-cqe; + + status = "disabled"; + + sdhc1_opp_table: sdhc1-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + qupv3_id_1: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x9c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x4c3 0x0>; + ranges; + status = "disabled"; + + uart2: serial@98c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x98c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&sdhc2_opp_table>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: sdhc2-opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm6350-qusb2-phy", "qcom,qusb2-v2-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&xo_board>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sc7180-qmp-usb3-dp-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x40>, + <0 0x088ea000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_QLINK_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&xo_board>; + clock-names = "aux", "ref", "com_aux", "cfg_ahb"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: usb3-phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eac00 0 0x400>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>, + <0 0x088eaa00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sm6350-llcc"; + reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm6350-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x540 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm6350-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>, <126 655 12>, <138 139 15>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm6350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm6350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x1000>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0xc440000 0 0x1100>, + <0 0xc600000 0 0x2000000>, + <0 0xe600000 0 0x100000>, + <0 0xe700000 0 0xa0000>, + <0 0xc40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm6350-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 157>; + + qup_uart2_default: qup-uart2-default { + pins = "gpio25", "gpio26"; + function = "qup13_f2"; + drive-strength = <2>; + bias-disable; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm6350-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c21000 0x0 0x1000>, + <0x0 0x17c22000 0x0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c23000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c25000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c27000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c29000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + label = "apps_rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sm6350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm6350-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + apps_bcm_voter: bcm_voter { + compatible = "qcom,bcm-voter"; + }; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + clock-frequency = <19200000>; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts new file mode 100644 index 000000000000..8d6fd22873e0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm7225.dtsi" +#include "pm6350.dtsi" + +/ { + model = "Fairphone 4"; + compatible = "fairphone,fp4", "qcom,sm7225"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <434 0x10000>, <459 0x10000>; + qcom,board-id = <8 32>; + + aliases { + serial0 = &uart2; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + framebuffer0: framebuffer@a000000 { + compatible = "simple-framebuffer"; + reg = <0 0xa0000000 0 (2340 * 1080 * 4)>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin>; + + volume-up { + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&apps_rsc { + pm6350-rpmh-regulators { + compatible = "qcom,pm6350-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a: smps1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s2a: smps2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <2048000>; + }; + + vreg_l2a: ldo2 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a: ldo3 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a: ldo4 { + regulator-min-microvolt = <352000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-min-microvolt = <1503000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a: ldo6 { + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a: ldo8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a: ldo9 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a: ldo12 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a: ldo13 { + regulator-min-microvolt = <570000>; + regulator-max-microvolt = <650000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a: ldo14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a: ldo15 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a: ldo16 { + regulator-min-microvolt = <830000>; + regulator-max-microvolt = <921000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a: ldo18 { + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1049000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a: ldo19 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a: ldo20 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <801000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a: ldo21 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <825000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a: ldo22 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm6150l-rpmh-regulators { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s8e: smps8 { + regulator-min-microvolt = <313000>; + regulator-max-microvolt = <1395000>; + }; + + vreg_l1e: ldo1 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e: ldo2 { + regulator-min-microvolt = <1170000>; + regulator-max-microvolt = <1305000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e: ldo3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1299000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4e: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5e: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6e: ldo6 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7e: ldo7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8e: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9e: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10e: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11e: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3401000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <5492000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; +}; + +&pm6350_gpios { + gpio_keys_pin: gpio-keys-pin { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + power-source = <0>; + }; +}; + +&pm6350_resin { + status = "okay"; + linux,code = <KEY_VOLUMEDOWN>; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <13 4>, <56 2>; +}; + +&uart2 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + maximum-speed = "super-speed"; + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l18a>; + vdda-pll-supply = <&vreg_l2a>; + vdda-phy-dpdm-supply = <&vreg_l3a>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l22a>; + vdda-pll-supply = <&vreg_l16a>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm7225.dtsi b/arch/arm64/boot/dts/qcom/sm7225.dtsi new file mode 100644 index 000000000000..7b2a002ca7ff --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm7225.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz> + */ + +#include "sm6350.dtsi" + +/* SM7225 uses Kryo 570 instead of Kryo 560 */ +&CPU0 { compatible = "qcom,kryo570"; }; +&CPU1 { compatible = "qcom,kryo570"; }; +&CPU2 { compatible = "qcom,kryo570"; }; +&CPU3 { compatible = "qcom,kryo570"; }; +&CPU4 { compatible = "qcom,kryo570"; }; +&CPU5 { compatible = "qcom,kryo570"; }; +&CPU6 { compatible = "qcom,kryo570"; }; +&CPU7 { compatible = "qcom,kryo570"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 335aa0753fc0..37ddca0f0223 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -419,9 +419,7 @@ status = "okay"; vdda-phy-supply = <&vdda_ufs_2ln_core_1>; - vdda-max-microamp = <90200>; vdda-pll-supply = <&vreg_l3c_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts index 736da9af44e0..5901c28e6696 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -15,6 +15,7 @@ / { model = "Microsoft Surface Duo"; compatible = "microsoft,surface-duo", "qcom,sm8150"; + chassis-type = "handset"; aliases { serial0 = &uart2; @@ -507,9 +508,7 @@ status = "okay"; vdda-phy-supply = <&vdda_ufs_2ln_core_1>; - vdda-max-microamp = <90200>; vdda-pll-supply = <&vreg_l3c_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index b484371a6044..46b5cf9a1192 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -416,9 +416,7 @@ status = "okay"; vdda-phy-supply = <&vdda_ufs_2ln_core_1>; - vdda-max-microamp = <90200>; vdda-pll-supply = <&vreg_l3c_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts index 3b55fdda767a..b2780403255e 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia 5"; compatible = "sony,bahamut-generic", "qcom,sm8150"; + chassis-type = "handset"; }; &framebuffer { diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts index 6f490ec284bd..0d6deceedf46 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts @@ -10,4 +10,5 @@ / { model = "Sony Xperia 1"; compatible = "sony,griffin-generic", "qcom,sm8150"; + chassis-type = "handset"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index ef0232c2cf45..81b4ff2cc4cd 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -6,7 +6,6 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,rpmh.h> @@ -1692,7 +1691,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -1729,13 +1728,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, - <&rpmhpd 3>, + power-domains = <&rpmhpd 3>, <&rpmhpd 2>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&slpi_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&slpi_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -1746,6 +1746,33 @@ label = "dsps"; qcom,remote-pid = <3>; mboxes = <&apss_shared 24>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x05a1 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x05a2 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x05a3 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; }; }; @@ -2319,13 +2346,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd 7>, + power-domains = <&rpmhpd 7>, <&rpmhpd 0>; - power-domain-names = "load_state", "cx", "mss"; + power-domain-names = "cx", "mss"; memory-region = <&mpss_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2945,12 +2973,12 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, - <&rpmhpd 7>; - power-domain-names = "load_state", "cx"; + power-domains = <&rpmhpd 7>; memory-region = <&cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&cdsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2961,6 +2989,72 @@ label = "cdsp"; qcom,remote-pid = <5>; mboxes = <&apss_shared 4>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1401 0x2040>, + <&apps_smmu 0x1421 0x0>, + <&apps_smmu 0x2001 0x420>, + <&apps_smmu 0x2041 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2 0x3440>, + <&apps_smmu 0x22 0x3400>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x3 0x3440>, + <&apps_smmu 0x1423 0x0>, + <&apps_smmu 0x2023 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x4 0x3440>, + <&apps_smmu 0x24 0x3400>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x5 0x3440>, + <&apps_smmu 0x25 0x3400>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x6 0x3460>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x7 0x3460>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x8 0x3460>; + }; + + /* note: secure cb9 in downstream */ + }; }; }; @@ -2994,7 +3088,6 @@ compatible = "qcom,sm8150-qmp-usb3-phy"; reg = <0 0x088e9000 0 0x18c>, <0 0x088e8000 0 0x10>; - reg-names = "reg-base", "dp_com"; status = "disabled"; #address-cells = <2>; #size-cells = <2>; @@ -3010,7 +3103,7 @@ <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: lanes@88e9200 { + usb_1_ssphy: phy@88e9200 { reg = <0 0x088e9200 0 0x200>, <0 0x088e9400 0 0x200>, <0 0x088e9c00 0 0x218>, @@ -3043,7 +3136,7 @@ <&gcc GCC_USB3_PHY_SEC_BCR>; reset-names = "phy", "common"; - usb_2_ssphy: lane@88eb200 { + usb_2_ssphy: phy@88eb200 { reg = <0 0x088eb200 0 0x200>, <0 0x088eb400 0 0x200>, <0 0x088eb800 0 0x800>, @@ -3169,12 +3262,16 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8150-aoss-qmp"; - reg = <0x0 0x0c300000 0x0 0x100000>; + reg = <0x0 0x0c300000 0x0 0x400>; interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; tsens0: thermal-sensor@c263000 { @@ -3321,12 +3418,12 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, - <&rpmhpd 7>; - power-domain-names = "load_state", "cx"; + power-domains = <&rpmhpd 7>; memory-region = <&adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -3337,6 +3434,32 @@ label = "lpass"; qcom,remote-pid = <2>; mboxes = <&apss_shared 8>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1b23 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1b24 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1b25 0x0>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts index 47742816ac2f..3b082472062b 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts @@ -409,9 +409,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5a_0p88>; - vdda-max-microamp = <89900>; vdda-pll-supply = <&vreg_l9a_1p2>; - vdda-pll-max-microamp = <18800>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 062b944be91d..5ffbcdd387ba 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -647,9 +647,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5a_0p875>; - vdda-max-microamp = <90200>; vdda-pll-supply = <&vreg_l9a_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts index 79afeb07f4a2..356a81698731 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia 1 II"; compatible = "sony,pdx203-generic", "qcom,sm8250"; + chassis-type = "handset"; }; /delete-node/ &vreg_l7f_1p8; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts index 16c96e838534..5ecf7dafb2ec 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -10,6 +10,7 @@ / { model = "Sony Xperia 5 II"; compatible = "sony,pdx206-generic", "qcom,sm8250"; + chassis-type = "handset"; }; &framebuffer { diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index d12e4cbfc852..6f6129b39c9c 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -13,7 +13,6 @@ #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sm8250.h> #include <dt-bindings/mailbox/qcom-ipcc.h> -#include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -273,13 +272,6 @@ reg = <0x0 0x80000000 0x0 0x0>; }; - mmcx_reg: mmcx-reg { - compatible = "regulator-fixed-domain"; - power-domains = <&rpmhpd SM8250_MMCX>; - required-opps = <&rpmhpd_opp_low_svs>; - regulator-name = "MMCX"; - }; - pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; @@ -1463,7 +1455,7 @@ status = "disabled"; - pcie0_lane: lanes@1c06200 { + pcie0_lane: phy@1c06200 { reg = <0 0x1c06200 0 0x170>, /* tx */ <0 0x1c06400 0 0x200>, /* rx */ <0 0x1c06800 0 0x1f0>, /* pcs */ @@ -1567,7 +1559,7 @@ status = "disabled"; - pcie1_lane: lanes@1c0e200 { + pcie1_lane: phy@1c0e200 { reg = <0 0x1c0e200 0 0x170>, /* tx0 */ <0 0x1c0e400 0 0x200>, /* rx0 */ <0 0x1c0ea00 0 0x1f0>, /* pcs */ @@ -1673,7 +1665,7 @@ status = "disabled"; - pcie2_lane: lanes@1c16200 { + pcie2_lane: phy@1c16200 { reg = <0 0x1c16200 0 0x170>, /* tx0 */ <0 0x1c16400 0 0x200>, /* rx0 */ <0 0x1c16a00 0 0x1f0>, /* pcs */ @@ -1750,7 +1742,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -2088,13 +2080,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, - <&rpmhpd SM8250_LCX>, + power-domains = <&rpmhpd SM8250_LCX>, <&rpmhpd SM8250_LMX>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&slpi_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_slpi_out 0>; qcom,smem-state-names = "stop"; @@ -2154,12 +2147,12 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, - <&rpmhpd SM8250_CX>; - power-domain-names = "load_state", "cx"; + power-domains = <&rpmhpd SM8250_CX>; memory-region = <&cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_cdsp_out 0>; qcom,smem-state-names = "stop"; @@ -2330,7 +2323,7 @@ <&gcc GCC_USB3_PHY_SEC_BCR>; reset-names = "phy", "common"; - usb_2_ssphy: lanes@88eb200 { + usb_2_ssphy: phy@88eb200 { reg = <0 0x088eb200 0 0x200>, <0 0x088eb400 0 0x200>, <0 0x088eb800 0 0x800>; @@ -2571,7 +2564,8 @@ clocks = <&gcc GCC_VIDEO_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>; - mmcx-supply = <&mmcx_reg>; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; clock-names = "iface", "bi_tcxo", "bi_tcxo_ao"; #clock-cells = <1>; #reset-cells = <1>; @@ -2846,7 +2840,8 @@ dispcc: clock-controller@af00000 { compatible = "qcom,sm8250-dispcc"; reg = <0 0x0af00000 0 0x10000>; - mmcx-supply = <&mmcx_reg>; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&dsi0_phy 0>, <&dsi0_phy 1>, @@ -2900,7 +2895,7 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8250-aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; @@ -2908,7 +2903,11 @@ IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; spmi_bus: spmi@c440000 { @@ -3825,13 +3824,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, - <&rpmhpd SM8250_LCX>, + power-domains = <&rpmhpd SM8250_LCX>, <&rpmhpd SM8250_LMX>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_adsp_out 0>; qcom,smem-state-names = "stop"; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 56093e260ddf..be062377c936 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -251,9 +251,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5b_0p88>; - vdda-max-microamp = <91600>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts index bd95009c1875..06eedbe52c42 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts @@ -286,6 +286,10 @@ firmware-name = "qcom/sm8350/modem.mbn"; }; +&pmk8350_rtc { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -318,9 +322,7 @@ status = "okay"; vdda-phy-supply = <&vreg_l5b_0p88>; - vdda-max-microamp = <91600>; vdda-pll-supply = <&vreg_l6b_1p2>; - vdda-pll-max-microamp = <19000>; }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index e91cd8a5e535..d134280e2939 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -8,7 +8,6 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> -#include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/thermal/thermal.h> @@ -48,6 +47,8 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; @@ -65,6 +66,8 @@ enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; @@ -79,6 +82,8 @@ enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; @@ -93,6 +98,8 @@ enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; @@ -107,6 +114,8 @@ enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; @@ -121,6 +130,8 @@ enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; @@ -136,6 +147,8 @@ enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; @@ -150,12 +163,86 @@ enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; }; }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <355>; + exit-latency-us = <909>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <241>; + exit-latency-us = <1461>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + idle-state-name = "cluster-power-collapse"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; }; firmware { @@ -179,6 +266,59 @@ psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_PD: cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>; + }; }; reserved_memory: reserved-memory { @@ -726,15 +866,16 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd 0>, + power-domains = <&rpmhpd 0>, <&rpmhpd 12>; - power-domain-names = "load_state", "cx", "mss"; + power-domain-names = "cx", "mss"; interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>; memory-region = <&pil_modem_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_modem_out 0>; qcom,smem-state-names = "stop"; @@ -788,13 +929,17 @@ aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8350-aoss-qmp"; - reg = <0 0x0c300000 0 0x100000>; + reg = <0 0x0c300000 0 0x400>; interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>; mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; - #power-domain-cells = <1>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; }; spmi_bus: spmi@c440000 { @@ -1070,7 +1215,6 @@ reg = <0 0x01d87000 0 0xe10>; #address-cells = <2>; #size-cells = <2>; - #clock-cells = <1>; ranges; clock-names = "ref", "ref_aux"; @@ -1081,7 +1225,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -1107,13 +1251,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, - <&rpmhpd 4>, + power-domains = <&rpmhpd 4>, <&rpmhpd 5>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&pil_slpi_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_slpi_out 0>; qcom,smem-state-names = "stop"; @@ -1129,6 +1274,32 @@ label = "slpi"; qcom,remote-pid = <3>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; }; }; @@ -1147,15 +1318,16 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, - <&rpmhpd 0>, + power-domains = <&rpmhpd 0>, <&rpmhpd 10>; - power-domain-names = "load_state", "cx", "mxc"; + power-domain-names = "cx", "mxc"; interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>; memory-region = <&pil_cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_cdsp_out 0>; qcom,smem-state-names = "stop"; @@ -1170,6 +1342,72 @@ label = "cdsp"; qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2161 0x0400>, + <&apps_smmu 0x1181 0x0420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2162 0x0400>, + <&apps_smmu 0x1182 0x0420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2163 0x0400>, + <&apps_smmu 0x1183 0x0420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2164 0x0400>, + <&apps_smmu 0x1184 0x0420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2165 0x0400>, + <&apps_smmu 0x1185 0x0420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2166 0x0400>, + <&apps_smmu 0x1186 0x0420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2167 0x0400>, + <&apps_smmu 0x1187 0x0420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2168 0x0400>, + <&apps_smmu 0x1188 0x0420>; + }; + + /* note: secure cb9 in downstream */ + }; }; }; @@ -1203,9 +1441,7 @@ compatible = "qcom,sm8350-qmp-usb3-phy"; reg = <0 0x088e9000 0 0x200>, <0 0x088e8000 0 0x20>; - reg-names = "reg-base", "dp_com"; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -1238,7 +1474,6 @@ compatible = "qcom,sm8350-qmp-usb3-uni-phy"; reg = <0 0x088eb000 0 0x200>; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -1381,13 +1616,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, - <&rpmhpd 4>, + power-domains = <&rpmhpd 4>, <&rpmhpd 5>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&pil_adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_adsp_out 0>; qcom,smem-state-names = "stop"; @@ -1402,6 +1638,32 @@ label = "lpass"; qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; }; }; }; |