diff options
| author | Thierry Reding <treding@nvidia.com> | 2020-06-12 09:13:52 +0200 |
|---|---|---|
| committer | Thierry Reding <treding@nvidia.com> | 2020-07-15 11:05:45 +0200 |
| commit | 644c569d7e540a7e447108b7e9087dbff8e06a93 (patch) | |
| tree | ef7988e4158267e3801c174c01fb1bdb6a5b6be9 /arch/arm64/boot/dts/nvidia/tegra132.dtsi | |
| parent | 7eb0454440e1522d347b2bc0db8eab742115098a (diff) | |
| download | linux-644c569d7e540a7e447108b7e9087dbff8e06a93.tar.bz2 | |
arm64: tegra: Use proper tuple notation
Tuple boundaries should be marked by < and > to make it clear which
cells are part of the same tuple. This also helps the json-schema based
validation tooling to properly parse this data.
While at it, also remove the "immovable" bit from PCI addresses. All of
these addresses are in fact "movable".
Signed-off-by: Thierry Reding <treding@nvidia.com>
Diffstat (limited to 'arch/arm64/boot/dts/nvidia/tegra132.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/nvidia/tegra132.dtsi | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 0cc6b4e9f954..9d6a214d86d7 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -17,9 +17,9 @@ pcie@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; - reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ - 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ - 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */ + <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */ + <0x0 0x02000000 0x0 0x10000000>; /* configuration space */ reg-names = "pads", "afi", "cs"; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ @@ -33,11 +33,11 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ - 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ - 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ - 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ - 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */ + <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */ + <0x01000000 0 0x0 0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */ + <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */ + <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ clocks = <&tegra_car TEGRA124_CLK_PCIE>, <&tegra_car TEGRA124_CLK_AFI>, @@ -857,8 +857,8 @@ soctherm: thermal-sensor@700e2000 { compatible = "nvidia,tegra132-soctherm"; - reg = <0x0 0x700e2000 0x0 0x600 /* 0: SOC_THERM reg_base */ - 0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */ + reg = <0x0 0x700e2000 0x0 0x600>, /* 0: SOC_THERM reg_base */ + <0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */ reg-names = "soctherm-reg", "ccroc-reg"; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, |