diff options
author | Luka Kovacic <luka.kovacic@sartura.hr> | 2020-10-25 02:13:51 +0100 |
---|---|---|
committer | Gregory CLEMENT <gregory.clement@bootlin.com> | 2020-11-29 12:05:09 +0100 |
commit | 6d96e11b777129d709096744e125bd866ff8b5a1 (patch) | |
tree | 87a5cbaa5a31bbdeb95454ecc4002508c4c785ae /arch/arm64/boot/dts/marvell | |
parent | f9559f029ebe05a87e9689f4aa444e19cc7426e4 (diff) | |
download | linux-6d96e11b777129d709096744e125bd866ff8b5a1.tar.bz2 |
arm64: dts: marvell: Add a device tree for the IEI Puzzle-M801 board
Add initial support for the IEI Puzzle-M801 1U Rackmount Network
Appliance board.
The board is based on the quad-core Marvell Armada 8040 SoC and supports
up to 16 GB of DDR4 2400 MHz ECC RAM. It has a PCIe x16 slot (x2 lanes
only) and an M.2 type B slot.
Main system hardware:
2x USB 3.0
4x Gigabit Ethernet
2x SFP+
1x SATA 3.0
1x M.2 type B
1x RJ45 UART
1x SPI flash
1x IEI WT61P803 PUZZLE Microcontroller
1x EPSON RX8010 RTC (used instead of the integrated Marvell RTC controller)
6x SFP+ LED
1x HDD LED
All of the hardware listed above is supported and tested in this port.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Diffstat (limited to 'arch/arm64/boot/dts/marvell')
-rw-r--r-- | arch/arm64/boot/dts/marvell/Makefile | 1 | ||||
-rw-r--r-- | arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts | 523 |
2 files changed, 524 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 3e5f2e7a040c..e413c3261792 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-puzzle-m801.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts new file mode 100644 index 000000000000..dac85fa748de --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts @@ -0,0 +1,523 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * Copyright (C) 2020 Sartura Ltd. + * + * Device Tree file for IEI Puzzle-M801 + */ + +#include "armada-8040.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "IEI-Puzzle-M801"; + compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp1_eth0; + ethernet2 = &cp0_eth1; + ethernet3 = &cp0_eth2; + ethernet4 = &cp1_eth1; + ethernet5 = &cp1_eth2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + /* Regulator labels correspond with schematics */ + v_3_3: regulator-3-3v { + compatible = "regulator-fixed"; + regulator-name = "v_3_3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_xhci_vbus_pins>; + regulator-name = "v_5v0_usb3_hst_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + + v_vddo_h: regulator-1-8v { + compatible = "regulator-fixed"; + regulator-name = "v_vddo_h"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + status = "okay"; + }; + + sfp_cp0_eth0: sfp-cp0-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&sfpplus0_i2c>; + los-gpio = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; + + sfp_cp1_eth0: sfp-cp1-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&sfpplus1_i2c>; + los-gpio = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + pinctrl-0 = <&cp0_sfpplus_led_pins &cp1_sfpplus_led_pins>; + pinctrl-names = "default"; + + led-0 { + /* SFP+ port 2: Activity */ + function = LED_FUNCTION_LAN; + function-enumerator = <0>; + gpios = <&cp1_gpio1 6 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* SFP+ port 1: Activity */ + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + gpios = <&cp1_gpio1 14 GPIO_ACTIVE_LOW>; + }; + + led-2 { + /* SFP+ port 2: 10 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + gpios = <&cp1_gpio1 7 GPIO_ACTIVE_LOW>; + }; + + led-3 { + /* SFP+ port 2: 1 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <3>; + gpios = <&cp1_gpio1 8 GPIO_ACTIVE_LOW>; + }; + + led-4 { + /* SFP+ port 1: 10 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <4>; + gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; + }; + + led-5 { + /* SFP+ port 1: 1 Gbps indicator */ + function = LED_FUNCTION_LAN; + function-enumerator = <5>; + gpios = <&cp1_gpio1 31 GPIO_ACTIVE_LOW>; + }; + + led-6 { + function = LED_FUNCTION_DISK; + linux,default-trigger = "disk-activity"; + gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + }; + + }; +}; + +&ap_sdhci0 { + bus-width = <8>; + /* + * Not stable in HS modes - phy needs "more calibration", so add + * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. + */ + marvell,xenon-phy-slow-mode; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + status = "okay"; + vqmmc-supply = <&v_vddo_h>; +}; + +&ap_thermal_cpu1 { + trips { + cpu_active: cpu-active { + temperature = <44000>; + hysteresis = <2000>; + type = "active"; + }; + }; + cooling-maps { + fan-map { + trip = <&cpu_active>; + cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>, + <&chassis_fan_group1 64 THERMAL_NO_LIMIT>; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8010"; + reg = <0x32>; + }; +}; + +&spi0 { + status = "okay"; + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x001f0000>; + }; + partition@u-boot-env { + label = "u-boot-env"; + reg = <0x001f0000 0x00010000>; + }; + partition@ubi1 { + label = "ubi1"; + reg = <0x00200000 0x03f00000>; + }; + partition@ubi2 { + label = "ubi2"; + reg = <0x04100000 0x03f00000>; + }; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&uart1 { + status = "okay"; + /* IEI WT61P803 PUZZLE MCU Controller */ + mcu { + compatible = "iei,wt61p803-puzzle"; + current-speed = <115200>; + enable-beep; + + leds { + compatible = "iei,wt61p803-puzzle-leds"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + hwmon { + compatible = "iei,wt61p803-puzzle-hwmon"; + #address-cells = <1>; + #size-cells = <0>; + + chassis_fan_group0:fan-group@0 { + #cooling-cells = <2>; + reg = <0x00>; + cooling-levels = <64 102 170 230 250>; + }; + + chassis_fan_group1:fan-group@1 { + #cooling-cells = <2>; + reg = <0x01>; + cooling-levels = <64 102 170 230 250>; + }; + }; + }; +}; + +&cp0_rtc { + status = "disabled"; +}; + +&cp0_i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; + + sfpplus_gpio: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + eeprom@54 { + compatible = "atmel,24c04"; + reg = <0x54>; + }; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + sfpplus0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + sfpplus1_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +&cp0_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_uart1_pins>; + status = "okay"; +}; + +&cp0_mdio { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + ge_phy2: ethernet-phy@0 { + reg = <0>; + }; + + ge_phy3: ethernet-phy@1 { + reg = <1>; + }; +}; + +&cp0_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_pcie_pins>; + num-lanes = <1>; + num-viewport = <8>; + reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + phys = <&cp0_comphy0 0>; + phy-names = "cp0-pcie0-x1-phy"; + status = "okay"; +}; + +&cp0_pinctrl { + cp0_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp32", "mpp34"; + marvell,function = "ge"; + }; + cp0_i2c1_pins: i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_i2c0_pins: i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_uart1_pins: uart1-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "uart1"; + }; + cp0_xhci_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + cp0_pcie_pins: pcie-pins { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: sdhci-pins { + marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_sfpplus_led_pins: sfpplus-led-pins { + marvell,pins = "mpp54"; + marvell,function = "gpio"; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + phys = <&cp0_comphy4 0>; + local-mac-address = [ae 00 00 00 ff 00]; + sfp = <&sfp_cp0_eth0>; + managed = "in-band-status"; +}; + +&cp0_eth1 { + status = "okay"; + phy = <&ge_phy2>; + phy-mode = "sgmii"; + local-mac-address = [ae 00 00 00 ff 01]; + phys = <&cp0_comphy3 1>; +}; + +&cp0_eth2 { + status = "okay"; + phy-mode = "sgmii"; + phys = <&cp0_comphy1 2>; + local-mac-address = [ae 00 00 00 ff 02]; + phy = <&ge_phy3>; +}; + +&cp0_sata0 { + status = "okay"; + + sata-port@0 { + phys = <&cp0_comphy2 0>; + phy-names = "cp0-sata0-0-phy"; + }; + + sata-port@1 { + phys = <&cp0_comphy5 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +&cp0_sdhci0 { + broken-cd; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins>; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_usb3_0 { + status = "okay"; +}; + +&cp0_usb3_1 { + status = "okay"; +}; + +&cp1_i2c0 { + clock-frequency = <100000>; + status = "disabled"; +}; + +&cp1_i2c1 { + clock-frequency = <100000>; + status = "disabled"; +}; + +&cp1_rtc { + status = "disabled"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +&cp1_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + phys = <&cp1_comphy4 0>; + local-mac-address = [ae 00 00 00 ff 03]; + sfp = <&sfp_cp1_eth0>; + managed = "in-band-status"; +}; + +&cp1_eth1 { + status = "okay"; + phy = <&ge_phy4>; + phy-mode = "sgmii"; + local-mac-address = [ae 00 00 00 ff 04]; + phys = <&cp1_comphy3 1>; +}; + +&cp1_eth2 { + status = "okay"; + phy-mode = "sgmii"; + local-mac-address = [ae 00 00 00 ff 05]; + phys = <&cp1_comphy5 2>; + phy = <&ge_phy5>; +}; + +&cp1_pinctrl { + cp1_sfpplus_led_pins: sfpplus-led-pins { + marvell,pins = "mpp6", "mpp7", "mpp8", "mpp10", "mpp14", "mpp31"; + marvell,function = "gpio"; + }; +}; + +&cp1_uart0 { + status = "disabled"; +}; + +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + +&cp1_usb3_0 { + phys = <&cp1_comphy2 0>; + phy-names = "cp1-usb3h0-comphy"; + status = "okay"; +}; + +&cp1_mdio { + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + ge_phy4: ethernet-phy@1 { + reg = <1>; + }; + ge_phy5: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cp1_pcie0 { + num-lanes = <2>; + phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>; + phy-names = "cp1-pcie0-x2-lane0-phy", "cp1-pcie0-x2-lane1-phy"; + status = "okay"; +}; |