diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-07-10 09:33:54 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-07-10 09:33:54 -0700 |
commit | e083bbd6040f4efa5c13633fb4e460b919d69dae (patch) | |
tree | eaaee1c0852e48f29f7cc162313f0ad38ee4a57b /arch/arm64/boot/dts/freescale | |
parent | 6e207b882159ed3e35a4cd4ff0fc155cce5e3cbc (diff) | |
parent | b62b189f7e2cfd1089b37be57b2e6672d5c3ae14 (diff) | |
download | linux-e083bbd6040f4efa5c13633fb4e460b919d69dae.tar.bz2 |
Merge tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Olof Johansson:
"Like always, the DT branch is sizable. There are numerous additions
and fixes to existing platforms, but also a handful of new ones
introduced. Less than some other releases, but there's been
significant work on cleanups, refactorings and device enabling on
existing platforms.
A non-exhaustive list of new material:
- Refactoring of BCM2711 dtsi structure to add support for the
Raspberry Pi 400
- Rockchip: RK3568 SoC and EVB, video codecs for
rk3036/3066/3188/322x
- Qualcomm: SA8155p Automotive platform (SM8150 derivative),
SM8150/8250 enhancements and support for Sony Xperia 1/1II and
5/5II
- TI K3: PCI/USB3 support on AM64-sk boards, R5 remoteproc
definitions
- TI OMAP: Various cleanups
- Tegra: Audio support for Jetson Xavier NX, SMMU support on Tegra194
- Qualcomm: lots of additions for peripherals across several SoCs,
and new support for Microsoft Surface Duo (SM8150-based), Huawei
Ascend G7.
- i.MX: Numerous additions of features across SoCs and boards.
- Allwinner: More device bindings for V3s, Forlinx OKA40i-C and
NanoPi R1S H5 boards
- MediaTek: More device bindings for mt8167, new Chromebook system
variants for mt8183
- Renesas: RZ/G2L SoC and EVK added
- Amlogic: BananaPi BPI-M5 board added"
* tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (511 commits)
arm64: dts: rockchip: add basic dts for RK3568 EVB
arm64: dts: rockchip: add core dtsi for RK3568 SoC
arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
ARM: dts: rockchip: add vpu and vdec node for RK322x
ARM: dts: rockchip: add vpu nodes for RK3066 and RK3188
ARM: dts: rockchip: add vpu node for RK3036
arm64: dts: ipq8074: Add QUP6 I2C node
arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
arm64: dts: rockchip: add SPDIF node for rk3399-firefly
arm64: dts: rockchip: Add Rotation Property for OGA Panel
arm64: dts: qcom: sc7180: bus votes for eMMC and SD card
arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen
arm64: dts: qcom: sm8250-edo: Enable GPI DMA
arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
arm64: dts: qcom: sm8250-edo: Enable PCIe
...
Diffstat (limited to 'arch/arm64/boot/dts/freescale')
25 files changed, 1789 insertions, 340 deletions
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 44890d56c194..25806c4924cb 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts index 6290e2f9de6a..e8562585d4ac 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts @@ -24,6 +24,10 @@ status = "okay"; }; +&pcie1 { + status = "okay"; +}; + &qspi { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 9058cfa4980f..50a72cda4727 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -238,35 +238,35 @@ "fsl,sec-v4.0-rtic"; #address-cells = <1>; #size-cells = <1>; - reg = <0x60000 0x100 0x60e00 0x18>; + reg = <0x60000 0x100>, <0x60e00 0x18>; ranges = <0x0 0x60100 0x500>; rtic_a: rtic-a@0 { compatible = "fsl,sec-v5.4-rtic-memory", "fsl,sec-v5.0-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x00 0x20 0x100 0x100>; + reg = <0x00 0x20>, <0x100 0x100>; }; rtic_b: rtic-b@20 { compatible = "fsl,sec-v5.4-rtic-memory", "fsl,sec-v5.0-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x20 0x20 0x200 0x100>; + reg = <0x20 0x20>, <0x200 0x100>; }; rtic_c: rtic-c@40 { compatible = "fsl,sec-v5.4-rtic-memory", "fsl,sec-v5.0-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x40 0x20 0x300 0x100>; + reg = <0x40 0x20>, <0x300 0x100>; }; rtic_d: rtic-d@60 { compatible = "fsl,sec-v5.4-rtic-memory", "fsl,sec-v5.0-rtic-memory", "fsl,sec-v4.0-rtic-memory"; - reg = <0x60 0x20 0x400 0x100>; + reg = <0x60 0x20>, <0x400 0x100>; }; }; }; @@ -522,8 +522,8 @@ pcie1: pcie@3400000 { compatible = "fsl,ls1012a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 118 0x4>, /* controller interrupt */ <0 117 0x4>; /* PME interrupt */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 9322c6ad8e4a..d7b527272500 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -275,6 +275,10 @@ status = "okay"; }; +&optee { + status = "okay"; +}; + &sai4 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index a30249ebffa8..b2e3e5d2a108 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -88,7 +88,7 @@ }; firmware { - optee { + optee: optee { compatible = "linaro,optee-tz"; method = "smc"; status = "disabled"; @@ -617,8 +617,8 @@ pcie1: pcie@3400000 { compatible = "fsl,ls1028a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x80 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x80 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ @@ -644,8 +644,8 @@ pcie2: pcie@3500000 { compatible = "fsl,ls1028a-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x88 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x88 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; @@ -990,19 +990,19 @@ msi-map = <0 &its 0x17 0xe>; iommu-map = <0 &smmu 0x17 0xe>; /* PF0-6 BAR0 - non-prefetchable memory */ - ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000 + ranges = <0x82000000 0x1 0xf8000000 0x1 0xf8000000 0x0 0x160000 /* PF0-6 BAR2 - prefetchable memory */ - 0xc2000000 0x0 0x00000000 0x1 0xf8160000 0x0 0x070000 + 0xc2000000 0x1 0xf8160000 0x1 0xf8160000 0x0 0x070000 /* PF0: VF0-1 BAR0 - non-prefetchable memory */ - 0x82000000 0x0 0x00000000 0x1 0xf81d0000 0x0 0x020000 + 0x82000000 0x1 0xf81d0000 0x1 0xf81d0000 0x0 0x020000 /* PF0: VF0-1 BAR2 - prefetchable memory */ - 0xc2000000 0x0 0x00000000 0x1 0xf81f0000 0x0 0x020000 + 0xc2000000 0x1 0xf81f0000 0x1 0xf81f0000 0x0 0x020000 /* PF1: VF0-1 BAR0 - non-prefetchable memory */ - 0x82000000 0x0 0x00000000 0x1 0xf8210000 0x0 0x020000 + 0x82000000 0x1 0xf8210000 0x1 0xf8210000 0x0 0x020000 /* PF1: VF0-1 BAR2 - prefetchable memory */ - 0xc2000000 0x0 0x00000000 0x1 0xf8230000 0x0 0x020000 + 0xc2000000 0x1 0xf8230000 0x1 0xf8230000 0x0 0x020000 /* BAR4 (PF5) - non-prefetchable memory */ - 0x82000000 0x0 0x00000000 0x1 0xfc000000 0x0 0x400000>; + 0x82000000 0x1 0xfc000000 0x1 0xfc000000 0x0 0x400000>; enetc_port0: ethernet@0,0 { compatible = "fsl,enetc"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 28c51e521cb2..01b01e320411 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -869,8 +869,8 @@ pcie1: pcie@3400000 { compatible = "fsl,ls1043a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 118 0x4>, /* controller interrupt */ <0 117 0x4>; /* PME interrupt */ @@ -895,8 +895,8 @@ pcie2: pcie@3500000 { compatible = "fsl,ls1043a-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 128 0x4>, <0 127 0x4>; @@ -921,8 +921,8 @@ pcie3: pcie@3600000 { compatible = "fsl,ls1043a-pcie"; - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ + <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 162 0x4>, <0 161 0x4>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 39458305e333..687fea6d8afa 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -773,8 +773,8 @@ pcie1: pcie@3400000 { compatible = "fsl,ls1046a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ @@ -799,8 +799,8 @@ pcie_ep1: pcie_ep@3400000 { compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; - reg = <0x00 0x03400000 0x0 0x00100000 - 0x40 0x00000000 0x8 0x00000000>; + reg = <0x00 0x03400000 0x0 0x00100000>, + <0x40 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; @@ -809,8 +809,8 @@ pcie2: pcie@3500000 { compatible = "fsl,ls1046a-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ @@ -835,8 +835,8 @@ pcie_ep2: pcie_ep@3500000 { compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; - reg = <0x00 0x03500000 0x0 0x00100000 - 0x48 0x00000000 0x8 0x00000000>; + reg = <0x00 0x03500000 0x0 0x00100000>, + <0x48 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; @@ -845,8 +845,8 @@ pcie3: pcie@3600000 { compatible = "fsl,ls1046a-pcie"; - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ + <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ @@ -871,8 +871,8 @@ pcie_ep3: pcie_ep@3600000 { compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"; - reg = <0x00 0x03600000 0x0 0x00100000 - 0x50 0x00000000 0x8 0x00000000>; + reg = <0x00 0x03600000 0x0 0x00100000>, + <0x50 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 8ffbc9fde041..2fa6cfbef01f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -536,8 +536,8 @@ pcie1: pcie@3400000 { compatible = "fsl,ls1088a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ interrupt-names = "aer"; @@ -562,8 +562,8 @@ pcie_ep1: pcie-ep@3400000 { compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; - reg = <0x00 0x03400000 0x0 0x00100000 - 0x20 0x00000000 0x8 0x00000000>; + reg = <0x00 0x03400000 0x0 0x00100000>, + <0x20 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; num-ib-windows = <24>; num-ob-windows = <256>; @@ -573,8 +573,8 @@ pcie2: pcie@3500000 { compatible = "fsl,ls1088a-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x28 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ interrupt-names = "aer"; @@ -599,8 +599,8 @@ pcie_ep2: pcie-ep@3500000 { compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; - reg = <0x00 0x03500000 0x0 0x00100000 - 0x28 0x00000000 0x8 0x00000000>; + reg = <0x00 0x03500000 0x0 0x00100000>, + <0x28 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <6>; @@ -609,8 +609,8 @@ pcie3: pcie@3600000 { compatible = "fsl,ls1088a-pcie"; - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ + <0x30 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ interrupt-names = "aer"; @@ -635,8 +635,8 @@ pcie_ep3: pcie-ep@3600000 { compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; - reg = <0x00 0x03600000 0x0 0x00100000 - 0x30 0x00000000 0x8 0x00000000>; + reg = <0x00 0x03600000 0x0 0x00100000>, + <0x30 0x00000000 0x8 0x00000000>; reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <6>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 76ab68d2de0b..6f6667b70028 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -120,32 +120,32 @@ }; &pcie1 { - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x10 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x10 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; &pcie2 { - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x12 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x12 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; &pcie3 { - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x14 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ + <0x14 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; &pcie4 { - reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ - 0x16 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */ + <0x16 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index da24dc127698..c3dc38188c17 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -121,8 +121,8 @@ &pcie1 { compatible = "fsl,ls2088a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; @@ -130,8 +130,8 @@ &pcie2 { compatible = "fsl,ls2088a-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x28 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; @@ -139,8 +139,8 @@ &pcie3 { compatible = "fsl,ls2088a-pcie"; - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ + <0x30 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; @@ -148,8 +148,8 @@ &pcie4 { compatible = "fsl,ls2088a-pcie"; - reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ - 0x38 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */ + <0x38 0x00000000 0x0 0x00002000>; /* configuration space */ ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000 0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 135ac8210871..801ba9612d36 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -929,7 +929,6 @@ QORIQ_CLK_PLL_DIV(4)>; clock-names = "dspi"; spi-num-chipselects = <5>; - bus-num = <0>; }; esdhc: esdhc@2140000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 0551f6f4c313..c4b1a59ba424 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -1089,8 +1089,8 @@ pcie1: pcie@3400000 { compatible = "fsl,lx2160a-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x80 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x80 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1117,8 +1117,8 @@ pcie2: pcie@3500000 { compatible = "fsl,lx2160a-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x88 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ + <0x88 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1145,8 +1145,8 @@ pcie3: pcie@3600000 { compatible = "fsl,lx2160a-pcie"; - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x90 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ + <0x90 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1173,8 +1173,8 @@ pcie4: pcie@3700000 { compatible = "fsl,lx2160a-pcie"; - reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ - 0x98 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */ + <0x98 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1201,8 +1201,8 @@ pcie5: pcie@3800000 { compatible = "fsl,lx2160a-pcie"; - reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */ - 0xa0 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03800000 0x0 0x00100000>, /* controller registers */ + <0xa0 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1229,8 +1229,8 @@ pcie6: pcie@3900000 { compatible = "fsl,lx2160a-pcie"; - reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */ - 0xa8 0x00000000 0x0 0x00002000>; /* configuration space */ + reg = <0x00 0x03900000 0x0 0x00100000>, /* controller registers */ + <0xa8 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index e1e81ca0ca69..a79f42a9618e 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -77,9 +77,12 @@ conn_subsys: bus@5b000000 { <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; clocks = <&enet0_lpcg IMX_LPCG_CLK_4>, <&enet0_lpcg IMX_LPCG_CLK_2>, - <&enet0_lpcg IMX_LPCG_CLK_1>, + <&enet0_lpcg IMX_LPCG_CLK_3>, <&enet0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>; + assigned-clock-rates = <250000000>, <125000000>; fsl,num-tx-queues=<3>; fsl,num-rx-queues=<3>; power-domains = <&pd IMX_SC_R_ENET_0>; @@ -94,9 +97,12 @@ conn_subsys: bus@5b000000 { <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; clocks = <&enet1_lpcg IMX_LPCG_CLK_4>, <&enet1_lpcg IMX_LPCG_CLK_2>, - <&enet1_lpcg IMX_LPCG_CLK_1>, + <&enet1_lpcg IMX_LPCG_CLK_3>, <&enet1_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>; + assigned-clock-rates = <250000000>, <125000000>; fsl,num-tx-queues=<3>; fsl,num-rx-queues=<3>; power-domains = <&pd IMX_SC_R_ENET_1>; @@ -152,15 +158,19 @@ conn_subsys: bus@5b000000 { #clock-cells = <1>; clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, - <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + <&conn_axi_clk>, + <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>, + <&conn_ipg_clk>, + <&conn_ipg_clk>; clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, - <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, - <IMX_LPCG_CLK_5>; - clock-output-names = "enet0_ipg_root_clk", - "enet0_tx_clk", - "enet0_ahb_clk", - "enet0_ipg_clk", - "enet0_ipg_s_clk"; + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + clock-output-names = "enet0_lpcg_timer_clk", + "enet0_lpcg_txc_sampling_clk", + "enet0_lpcg_ahb_clk", + "enet0_lpcg_rgmii_txc_clk", + "enet0_lpcg_ipg_clk", + "enet0_lpcg_ipg_s_clk"; power-domains = <&pd IMX_SC_R_ENET_0>; }; @@ -170,15 +180,19 @@ conn_subsys: bus@5b000000 { #clock-cells = <1>; clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, - <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>; + <&conn_axi_clk>, + <&clk IMX_SC_R_ENET_1 IMX_SC_C_TXCLK>, + <&conn_ipg_clk>, + <&conn_ipg_clk>; clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, - <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>, - <IMX_LPCG_CLK_5>; - clock-output-names = "enet1_ipg_root_clk", - "enet1_tx_clk", - "enet1_ahb_clk", - "enet1_ipg_clk", - "enet1_ipg_s_clk"; + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + clock-output-names = "enet1_lpcg_timer_clk", + "enet1_lpcg_txc_sampling_clk", + "enet1_lpcg_ahb_clk", + "enet1_lpcg_rgmii_txc_clk", + "enet1_lpcg_ipg_clk", + "enet1_lpcg_ipg_s_clk"; power-domains = <&pd IMX_SC_R_ENET_1>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 6518f088b2c2..e033d0257b5a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -314,6 +314,7 @@ srp-disable; adp-disable; usb-role-switch; + disable-over-current; samsung,picophy-pre-emp-curr-control = <3>; samsung,picophy-dc-vol-level-adjust = <7>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts new file mode 100644 index 000000000000..5a1e9df39bec --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -0,0 +1,1019 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Gateworks Corporation + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> + +#include "imx8mm.dtsi" + +/ { + model = "Gateworks Venice GW7901 i.MX8MM board"; + compatible = "gw,imx8mm-gw7901", "fsl,imx8mm"; + + aliases { + ethernet0 = &fec1; + ethernet1 = &lan1; + ethernet2 = &lan2; + ethernet3 = &lan3; + ethernet4 = &lan4; + usb0 = &usbotg1; + usb1 = &usbotg2; + }; + + chosen { + stdout-path = &uart2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + user-pb { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + + led-controller { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led01_red"; + gpios = <&leds_gpio 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led01_grn"; + gpios = <&leds_gpio 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led02_red"; + gpios = <&leds_gpio 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-3 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led02_grn"; + gpios = <&leds_gpio 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-4 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led03_red"; + gpios = <&leds_gpio 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-5 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led03_grn"; + gpios = <&leds_gpio 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-6 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led04_red"; + gpios = <&leds_gpio 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-7 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led04_grn"; + gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-8 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led05_red"; + gpios = <&leds_gpio 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-9 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led05_grn"; + gpios = <&leds_gpio 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-a { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + label = "led06_red"; + gpios = <&leds_gpio 12 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-b { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + label = "led06_grn"; + gpios = <&leds_gpio 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator-ioexp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_ioexp>; + compatible = "regulator-fixed"; + regulator-name = "ioexp"; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator-isouart { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_isouart>; + compatible = "regulator-fixed"; + regulator-name = "iso_uart"; + gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + startup-delay-us = <100>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb2_vbus: regulator-usb2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2>; + compatible = "regulator-fixed"; + regulator-name = "usb_usb2_vbus"; + gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_wifi: regulator-wifi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wl>; + compatible = "regulator-fixed"; + regulator-name = "wifi"; + gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + status = "okay"; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vin_aux1"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vin_aux2"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_0p95"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_soc"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_arm"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_1p8"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_1p2"; + }; + + channel@9c { + gw,mode = <2>; + reg = <0x9c>; + label = "vdd_dram"; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio3>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + + regulators { + /* vdd_soc: 0.805-0.900V (typ=0.8V) */ + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + /* vdd_arm: 0.805-1.0V (typ=0.9V) */ + BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + /* vdd_0p9: 0.805-1.0V (typ=0.9V) */ + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_3p3 */ + BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_1p8 */ + BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_dram */ + BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + /* nvcc_snvs_1p8 */ + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdd_snvs_0p8 */ + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vdda_1p8 */ + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + leds_gpio: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + switch: switch@5f { + compatible = "microchip,ksz9897"; + reg = <0x5f>; + pinctrl-0 = <&pinctrl_ksz>; + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + phy-mode = "rgmii-id"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + lan1: port@0 { + reg = <0>; + label = "lan1"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan2: port@1 { + reg = <1>; + label = "lan2"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan3: port@2 { + reg = <2>; + label = "lan3"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan4: port@3 { + reg = <3>; + label = "lan4"; + local-mac-address = [00 00 00 00 00 00]; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&fec1>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + crypto@60 { + compatible = "atmel,atecc508a"; + reg = <0x60>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; + rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; + cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>; + cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; + +/* SDIO WiFi */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wifi>; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* DIG2_OUT */ + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* DIG2_IN */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* DIG1_IN */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIG1_OUT */ + MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x40000041 /* SIM2DET# */ + MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x40000041 /* SIM1DET# */ + MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* SIM2SEL */ + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 /* IRQ# */ + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 /* RST# */ + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x159 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_ksz: kszgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x41 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x41 /* RST# */ + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41 + >; + }; + + pinctrl_reg_isouart: regisouartgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 + >; + }; + + pinctrl_reg_ioexp: regioexpgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 + >; + }; + + pinctrl_reg_wl: regwlgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x40000041 + >; + }; + + pinctrl_reg_usb2: regusb1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x41 + MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x41 + >; + }; + + pinctrl_spi1: spi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x140 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x140 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x140 + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x140 + MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x140 + >; + }; + + pinctrl_uart1_gpio: uart1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000041 /* RS422# */ + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x40000041 /* RS485# */ + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x40000041 /* RS232# */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x140 + MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x140 + >; + }; + + pinctrl_uart3_gpio: uart3gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000041 /* RS232# */ + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* RS422# */ + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000041 /* RS485# */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 + MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x140 + MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x140 + >; + }; + + pinctrl_uart4_gpio: uart4gpiogrp { + fsl,pins = < + + MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x40000041 /* RS232# */ + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40000041 /* RS422# */ + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* RS485# */ + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; + +&cpu_alert0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; +}; + +&cpu_crit0 { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index a27e02bee6b4..e7648c3b8390 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -261,6 +261,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; + dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; nvmem-cells = <&imx8mm_uid>; nvmem-cell-names = "soc_unique_id"; @@ -271,117 +272,125 @@ #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; - sai1: sai@30010000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30010000 0x10000>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI1_IPG>, - <&clk IMX8MM_CLK_SAI1_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + spba2: spba-bus@30000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x100000>; + ranges; + + sai1: sai@30010000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI1_IPG>, + <&clk IMX8MM_CLK_SAI1_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai2: sai@30020000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30020000 0x10000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI2_IPG>, - <&clk IMX8MM_CLK_SAI2_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai2: sai@30020000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30020000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI2_IPG>, + <&clk IMX8MM_CLK_SAI2_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai3: sai@30030000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30030000 0x10000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI3_IPG>, - <&clk IMX8MM_CLK_SAI3_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai3: sai@30030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI3_IPG>, + <&clk IMX8MM_CLK_SAI3_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai5: sai@30050000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30050000 0x10000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI5_IPG>, - <&clk IMX8MM_CLK_SAI5_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai5: sai@30050000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI5_IPG>, + <&clk IMX8MM_CLK_SAI5_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - sai6: sai@30060000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; - reg = <0x30060000 0x10000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_SAI6_IPG>, - <&clk IMX8MM_CLK_SAI6_ROOT>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + sai6: sai@30060000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30060000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI6_IPG>, + <&clk IMX8MM_CLK_SAI6_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - micfil: audio-controller@30080000 { - compatible = "fsl,imx8mm-micfil"; - reg = <0x30080000 0x10000>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_PDM_IPG>, - <&clk IMX8MM_CLK_PDM_ROOT>, - <&clk IMX8MM_AUDIO_PLL1_OUT>, - <&clk IMX8MM_AUDIO_PLL2_OUT>, - <&clk IMX8MM_CLK_EXT3>; - clock-names = "ipg_clk", "ipg_clk_app", - "pll8k", "pll11k", "clkext3"; - dmas = <&sdma2 24 25 0x80000000>; - dma-names = "rx"; - status = "disabled"; - }; + micfil: audio-controller@30080000 { + compatible = "fsl,imx8mm-micfil"; + reg = <0x30080000 0x10000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PDM_IPG>, + <&clk IMX8MM_CLK_PDM_ROOT>, + <&clk IMX8MM_AUDIO_PLL1_OUT>, + <&clk IMX8MM_AUDIO_PLL2_OUT>, + <&clk IMX8MM_CLK_EXT3>; + clock-names = "ipg_clk", "ipg_clk_app", + "pll8k", "pll11k", "clkext3"; + dmas = <&sdma2 24 25 0x80000000>; + dma-names = "rx"; + status = "disabled"; + }; - spdif1: spdif@30090000 { - compatible = "fsl,imx35-spdif"; - reg = <0x30090000 0x10000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ - <&clk IMX8MM_CLK_24M>, /* rxtx0 */ - <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ - <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ - <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ - <&clk IMX8MM_CLK_DUMMY>; /* spba */ - clock-names = "core", "rxtx0", - "rxtx1", "rxtx2", - "rxtx3", "rxtx4", - "rxtx5", "rxtx6", - "rxtx7", "spba"; - dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; - dma-names = "rx", "tx"; - status = "disabled"; + spdif1: spdif@30090000 { + compatible = "fsl,imx35-spdif"; + reg = <0x30090000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ + <&clk IMX8MM_CLK_24M>, /* rxtx0 */ + <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MM_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; }; gpio1: gpio@30200000 { @@ -670,80 +679,88 @@ ranges = <0x30800000 0x30800000 0x400000>, <0x8000000 0x8000000 0x10000000>; - ecspi1: spi@30820000 { - compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + spba1: spba-bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - reg = <0x30820000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, - <&clk IMX8MM_CLK_ECSPI1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + #size-cells = <1>; + reg = <0x30800000 0x100000>; + ranges; + + ecspi1: spi@30820000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, + <&clk IMX8MM_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - ecspi2: spi@30830000 { - compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30830000 0x10000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, - <&clk IMX8MM_CLK_ECSPI2_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi2: spi@30830000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, + <&clk IMX8MM_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - ecspi3: spi@30840000 { - compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30840000 0x10000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, - <&clk IMX8MM_CLK_ECSPI3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi3: spi@30840000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, + <&clk IMX8MM_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart1: serial@30860000 { - compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_UART1_ROOT>, - <&clk IMX8MM_CLK_UART1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart1: serial@30860000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART1_ROOT>, + <&clk IMX8MM_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart3: serial@30880000 { - compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_UART3_ROOT>, - <&clk IMX8MM_CLK_UART3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart3: serial@30880000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART3_ROOT>, + <&clk IMX8MM_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart2: serial@30890000 { - compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_UART2_ROOT>, - <&clk IMX8MM_CLK_UART2_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; + uart2: serial@30890000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART2_ROOT>, + <&clk IMX8MM_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; }; crypto: crypto@30900000 { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi index c35eeaff958f..54eaf3d6055b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi @@ -120,6 +120,9 @@ interrupt-parent = <&gpio1>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; regulators { buck1_reg: BUCK1 { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index a0dddba2e561..85e65f8719ea 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -193,6 +193,7 @@ srp-disable; adp-disable; usb-role-switch; + disable-over-current; samsung,picophy-pre-emp-curr-control = <3>; samsung,picophy-dc-vol-level-adjust = <7>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 4dac4da38f4c..d4231e061403 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -245,6 +245,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; + dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; nvmem-cells = <&imx8mn_uid>; nvmem-cell-names = "soc_unique_id"; @@ -255,7 +256,7 @@ #size-cells = <1>; ranges; - spba: spba-bus@30000000 { + spba2: spba-bus@30000000 { compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -681,80 +682,88 @@ #size-cells = <1>; ranges; - ecspi1: spi@30820000 { - compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + spba1: spba-bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - reg = <0x30820000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>, - <&clk IMX8MN_CLK_ECSPI1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + #size-cells = <1>; + reg = <0x30800000 0x100000>; + ranges; - ecspi2: spi@30830000 { - compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30830000 0x10000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>, - <&clk IMX8MN_CLK_ECSPI2_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi1: spi@30820000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>, + <&clk IMX8MN_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - ecspi3: spi@30840000 { - compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x30840000 0x10000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>, - <&clk IMX8MN_CLK_ECSPI3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi2: spi@30830000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>, + <&clk IMX8MN_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart1: serial@30860000 { - compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_UART1_ROOT>, - <&clk IMX8MN_CLK_UART1_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + ecspi3: spi@30840000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>, + <&clk IMX8MN_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart3: serial@30880000 { - compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_UART3_ROOT>, - <&clk IMX8MN_CLK_UART3_ROOT>; - clock-names = "ipg", "per"; - dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + uart1: serial@30860000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART1_ROOT>, + <&clk IMX8MN_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - uart2: serial@30890000 { - compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MN_CLK_UART2_ROOT>, - <&clk IMX8MN_CLK_UART2_ROOT>; - clock-names = "ipg", "per"; - status = "disabled"; + uart3: serial@30880000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART3_ROOT>, + <&clk IMX8MN_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART2_ROOT>, + <&clk IMX8MN_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; }; crypto: crypto@30900000 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 2c28e589677e..7b99fad6e4d6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -81,6 +81,26 @@ status = "disabled";/* can2 pin conflict with pdm */ }; +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + eee-broken-1000t; + }; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; @@ -104,6 +124,92 @@ }; }; +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1025000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + regulator-always-on; + }; + + BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + }; + + BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1045000>; + regulator-max-microvolt = <1155000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + &i2c3 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -177,6 +283,26 @@ }; &iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x19 + >; + }; + pinctrl_fec: fecgrp { fsl,pins = < MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 @@ -229,6 +355,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3 @@ -236,6 +369,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { fsl,pins = < MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi index f3965ec5b31d..aa78e0d8c72b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi @@ -65,6 +65,20 @@ }; }; +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + som_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; @@ -217,6 +231,17 @@ >; }; + pinctrl_flexspi0: flexspi0grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2 + MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82 + MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82 + MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82 + MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82 + MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3 diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index c2d51a46cb3c..9f7c7f587d38 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -37,6 +37,7 @@ serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; + spi0 = &flexspi; }; cpus { @@ -407,7 +408,6 @@ <&clk IMX8MP_CLK_GIC>, <&clk IMX8MP_CLK_AUDIO_AHB>, <&clk IMX8MP_CLK_AUDIO_AXI_SRC>, - <&clk IMX8MP_CLK_IPG_AUDIO_ROOT>, <&clk IMX8MP_AUDIO_PLL1>, <&clk IMX8MP_AUDIO_PLL2>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, @@ -423,7 +423,6 @@ <500000000>, <400000000>, <800000000>, - <400000000>, <393216000>, <361267200>; }; @@ -761,6 +760,21 @@ status = "disabled"; }; + flexspi: spi@30bb0000 { + compatible = "nxp,imx8mp-fspi"; + reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_QSPI_ROOT>, + <&clk IMX8MP_CLK_QSPI_ROOT>; + clock-names = "fspi", "fspi_en"; + assigned-clock-rates = <80000000>; + assigned-clocks = <&clk IMX8MP_CLK_QSPI>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; reg = <0x30bd0000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 85b045253a0e..4d2035e3dd7c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -318,6 +318,7 @@ <&clk IMX8MQ_CLK_PCIE1_PHY>, <&pcie0_refclk>; clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + vph-supply = <&vgen5_reg>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts index 81d269296610..f70fb32b96b0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts @@ -34,6 +34,30 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + ddc-i2c-bus = <&ddc_i2c_bus>; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <<8912_out>; + }; + }; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_vref_0v9: regulator-vref-0v9 { compatible = "regulator-fixed"; regulator-name = "vref-0v9"; @@ -70,6 +94,9 @@ }; }; +&dphy { + status = "okay"; +}; &fec1 { pinctrl-names = "default"; @@ -91,6 +118,15 @@ }; }; +/* Release reset of the USB Host HUB */ +&gpio1 { + usb-host-reset-hog { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -174,6 +210,98 @@ }; }; +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + pca9546: i2cmux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c4@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912b"; + reg = <0x48> ; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + lt8912_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + }; + + ddc_i2c_bus: i2c4@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + }; + + i2c4@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + + max7323: gpio-expander@68 { + compatible = "maxim,max7323"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max7323>; + gpio-controller; + reg = <0x68>; + #gpio-cells = <2>; + }; + }; + }; +}; + +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ports { + port@1 { + reg = <1>; + + mipi_dsi_out: endpoint { + remote-endpoint = <&hdmi_out_in>; + }; + }; + }; +}; + &uart1 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -190,6 +318,29 @@ status = "okay"; }; +&usb_dwc3_0 { + dr_mode = "otg"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3_0>; + status = "okay"; +}; + +&usb3_phy0 { + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usb3_phy1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3_1>; + status = "okay"; +}; + &usdhc1 { assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; assigned-clock-rates = <400000000>; @@ -321,6 +472,19 @@ >; }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f + >; + }; + + pinctrl_max7323: max7323grp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 + >; + }; + pinctrl_reg_arm_dram: reg-arm-dramgrp { fsl,pins = < MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x16 @@ -339,6 +503,12 @@ >; }; + pinctrl_reg_usbotg_vbus: reg-usbotg-vbusgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x16 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45 @@ -353,6 +523,18 @@ >; }; + pinctrl_usb3_0: usb3-0grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x16 + >; + }; + + pinctrl_usb3_1: usb3-1grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x16 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 17c449e12c2e..91df9c5350ae 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1383,6 +1383,14 @@ <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; reset-names = "pciephy", "apps", "turnoff"; + assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&clk IMX8MQ_CLK_PCIE1_AUX>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>, + <&clk IMX8MQ_SYS2_PLL_100M>, + <&clk IMX8MQ_SYS1_PLL_80M>; + assigned-clock-rates = <250000000>, <100000000>, + <10000000>; status = "disabled"; }; @@ -1413,6 +1421,14 @@ <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; reset-names = "pciephy", "apps", "turnoff"; + assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>, + <&clk IMX8MQ_SYS2_PLL_100M>, + <&clk IMX8MQ_SYS1_PLL_80M>; + assigned-clock-rates = <250000000>, <100000000>, + <10000000>; status = "disabled"; }; |