diff options
author | Krzysztof Kozlowski <krzk@kernel.org> | 2020-09-17 20:54:48 +0200 |
---|---|---|
committer | Shawn Guo <shawnguo@kernel.org> | 2020-09-22 17:06:04 +0800 |
commit | 4153f7811a9b2b6f65f9ba5470d4f3e020ad1b7c (patch) | |
tree | 5fd35cf56245f948fbec061d6349785c40bf5f59 /arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | |
parent | 5f67317bd967bbdde945ce3a586d3841f8a5bf65 (diff) | |
download | linux-4153f7811a9b2b6f65f9ba5470d4f3e020ad1b7c.tar.bz2 |
arm64: dts: imx8mn: correct interrupt flags
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
For level low interrupts, enable also internal pull up. It is
required at least on imx8mm-evk, according to schematics.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts')
-rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index 68fa943ea8d8..46e76cf32b2f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -55,7 +55,7 @@ reg = <0x4b>; pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; regulators { |