diff options
author | Alex Marginean <alexandru.marginean@nxp.com> | 2021-12-14 03:32:40 -0600 |
---|---|---|
committer | Shawn Guo <shawnguo@kernel.org> | 2021-12-16 17:58:01 +0800 |
commit | e426d63e752bdbe7d5ba2d872319dde9ab844a07 (patch) | |
tree | 469afc83cea01e226e571a4d196100dc353c127a /arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts | |
parent | 52b98481171eee3fa5abbedd57f9e64cbfb727e1 (diff) | |
download | linux-e426d63e752bdbe7d5ba2d872319dde9ab844a07.tar.bz2 |
arm64: dts: ls1028a-qds: add overlays for various serdes protocols
Add overlays for various serdes protocols on LS1028A QDS board using
different PHY cards. These should be applied at boot, based on serdes
configuration. If no overlay is applied, only the RGMII interface on
the QDS is available in Linux.
Building device tree fragments requires passing the "-@" argument to
dtc, which increases the base dtb size and might cause some platforms to
fail to store the new binary. To avoid that, it would be nice to only
pass "-@" for the platforms where fragments will be used, aka
LS1028A-QDS. One approach suggested by Rob Herring is used here:
https://lore.kernel.org/patchwork/patch/821645/
Also moved the enet* override nodes in dts file to be in alphabetic order.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts')
-rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts new file mode 100644 index 000000000000..f748a2c12a70 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree fragment for LS1028A QDS board, serdes 13bb + * + * Copyright 2019-2021 NXP + * + * Requires a LS1028A QDS board with lane B rework. + * Requires a SCH-30841 card with lane A of connector rewired to PHY lane C. + * Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2. + */ + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target = <&mdio_slot1>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + slot1_sgmii: ethernet-phy@2 { + /* AQR112 */ + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + }; + + fragment@1 { + target = <&enetc_port0>; + + __overlay__ { + phy-handle = <&slot1_sgmii>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + status = "okay"; + }; + }; + + fragment@2 { + target = <&mdio_slot2>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + /* 4 ports on AQR412 */ + slot2_qxgmii0: ethernet-phy@0 { + reg = <0x0>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot2_qxgmii1: ethernet-phy@1 { + reg = <0x1>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot2_qxgmii2: ethernet-phy@2 { + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot2_qxgmii3: ethernet-phy@3 { + reg = <0x3>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + }; + + fragment@3 { + target = <&mscc_felix_ports>; + + __overlay__ { + port@0 { + status = "okay"; + phy-handle = <&slot2_qxgmii0>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; + + port@1 { + status = "okay"; + phy-handle = <&slot2_qxgmii1>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; + + port@2 { + status = "okay"; + phy-handle = <&slot2_qxgmii2>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; + + port@3 { + status = "okay"; + phy-handle = <&slot2_qxgmii3>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; + }; + }; + + fragment@4 { + target = <&mscc_felix>; + + __overlay__ { + status = "okay"; + }; + }; +}; |