diff options
author | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-05-09 13:05:57 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-05-09 13:05:57 -0700 |
commit | 932c37c375cca25175f9b6acee4c75d7a96d985f (patch) | |
tree | d7ba3620cd9a7a21c2de1bdfc7badd7637ed635e /arch/arm/plat-omap/usb.c | |
parent | c855ff3718e5f667b463b20b9de516b4cd7625ad (diff) | |
parent | 805f53f085346b6765eda02820721a14ce0d644f (diff) | |
download | linux-932c37c375cca25175f9b6acee4c75d7a96d985f.tar.bz2 |
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits)
ARM: OMAP: Fix GCC-reported compile time bug
ARM: OMAP: restore CONFIG_GENERIC_TIME
ARM: OMAP: partial LED fixes
ARM: OMAP: add SoSSI clock (call propagate_rate for childrens)
ARM: OMAP: FB sync with N800 tree (support for dynamic SRAM allocations)
ARM: OMAP: Sync framebuffer headers with N800 tree
ARM: OMAP: Mostly cosmetic to sync up with linux-omap tree
ARM: OMAP: Fix gpmc header
ARM: OMAP: Add mailbox support for IVA
[ARM] armv7: add Makefile and Kconfig entries
[ARM] armv7: add support for asid-tagged VIVT I-cache
[ARM] armv7: add dedicated ARMv7 barrier instructions
[ARM] armv7: Add ARMv7 cacheid macros
[ARM] armv7: add support for ARMv7 cores.
[ARM] Fix ARM branch relocation range
[ARM] 4363/1: AT91: Remove legacy PIO definitions
[ARM] 4361/1: AT91: Build error
ARM: OMAP: Sync core code with linux-omap
ARM: OMAP: Sync headers with linux-omap
ARM: OMAP: h4 must have blinky leds!!
...
Diffstat (limited to 'arch/arm/plat-omap/usb.c')
-rw-r--r-- | arch/arm/plat-omap/usb.c | 199 |
1 files changed, 159 insertions, 40 deletions
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 7e8096809be2..25489aafb113 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -37,9 +37,27 @@ #include <asm/arch/usb.h> #include <asm/arch/board.h> +#ifdef CONFIG_ARCH_OMAP1 + +#define INT_USB_IRQ_GEN IH2_BASE + 20 +#define INT_USB_IRQ_NISO IH2_BASE + 30 +#define INT_USB_IRQ_ISO IH2_BASE + 29 +#define INT_USB_IRQ_HGEN INT_USB_HHC_1 +#define INT_USB_IRQ_OTG IH2_BASE + 8 + +#else + +#define INT_USB_IRQ_GEN INT_24XX_USB_IRQ_GEN +#define INT_USB_IRQ_NISO INT_24XX_USB_IRQ_NISO +#define INT_USB_IRQ_ISO INT_24XX_USB_IRQ_ISO +#define INT_USB_IRQ_HGEN INT_24XX_USB_IRQ_HGEN +#define INT_USB_IRQ_OTG INT_24XX_USB_IRQ_OTG + +#endif + + /* These routines should handle the standard chip-specific modes * for usb0/1/2 ports, covering basic mux and transceiver setup. - * Call omap_usb_init() once, from INIT_MACHINE(). * * Some board-*.c files will need to set up additional mux options, * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup. @@ -96,19 +114,26 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) { u32 syscon1 = 0; + if (cpu_is_omap24xx()) + CONTROL_DEVCONF_REG &= ~USBT0WRMODEI(USB_BIDIR_TLL); + if (nwires == 0) { - if (!cpu_is_omap15xx()) { + if (cpu_class_is_omap1() && !cpu_is_omap15xx()) { /* pulldown D+/D- */ USB_TRANSCEIVER_CTRL_REG &= ~(3 << 1); } return 0; } - if (is_device) - omap_cfg_reg(W4_USB_PUEN); + if (is_device) { + if (cpu_is_omap24xx()) + omap_cfg_reg(J20_24XX_USB0_PUEN); + else + omap_cfg_reg(W4_USB_PUEN); + } - /* internal transceiver */ - if (nwires == 2) { + /* internal transceiver (unavailable on 17xx, 24xx) */ + if (!cpu_class_is_omap2() && nwires == 2) { // omap_cfg_reg(P9_USB_DP); // omap_cfg_reg(R8_USB_DM); @@ -136,29 +161,50 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) return 0; } - omap_cfg_reg(V6_USB0_TXD); - omap_cfg_reg(W9_USB0_TXEN); - omap_cfg_reg(W5_USB0_SE0); + if (cpu_is_omap24xx()) { + omap_cfg_reg(K18_24XX_USB0_DAT); + omap_cfg_reg(K19_24XX_USB0_TXEN); + omap_cfg_reg(J14_24XX_USB0_SE0); + if (nwires != 3) + omap_cfg_reg(J18_24XX_USB0_RCV); + } else { + omap_cfg_reg(V6_USB0_TXD); + omap_cfg_reg(W9_USB0_TXEN); + omap_cfg_reg(W5_USB0_SE0); + if (nwires != 3) + omap_cfg_reg(Y5_USB0_RCV); + } - /* NOTE: SPEED and SUSP aren't configured here */ + /* NOTE: SPEED and SUSP aren't configured here. OTG hosts + * may be able to use I2C requests to set those bits along + * with VBUS switching and overcurrent detction. + */ - if (nwires != 3) - omap_cfg_reg(Y5_USB0_RCV); - if (nwires != 6) + if (cpu_class_is_omap1() && nwires != 6) USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R; switch (nwires) { case 3: syscon1 = 2; + if (cpu_is_omap24xx()) + CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_BIDIR); break; case 4: syscon1 = 1; + if (cpu_is_omap24xx()) + CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_BIDIR); break; case 6: syscon1 = 3; - omap_cfg_reg(AA9_USB0_VP); - omap_cfg_reg(R9_USB0_VM); - USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R; + if (cpu_is_omap24xx()) { + omap_cfg_reg(J19_24XX_USB0_VP); + omap_cfg_reg(K20_24XX_USB0_VM); + CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_UNIDIR); + } else { + omap_cfg_reg(AA9_USB0_VP); + omap_cfg_reg(R9_USB0_VM); + USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R; + } break; default: printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", @@ -171,14 +217,22 @@ static u32 __init omap_usb1_init(unsigned nwires) { u32 syscon1 = 0; - if (nwires != 6 && !cpu_is_omap15xx()) + if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB1_UNI_R; + if (cpu_is_omap24xx()) + CONTROL_DEVCONF_REG &= ~USBT1WRMODEI(USB_BIDIR_TLL); + if (nwires == 0) return 0; /* external transceiver */ - omap_cfg_reg(USB1_TXD); - omap_cfg_reg(USB1_TXEN); + if (cpu_class_is_omap1()) { + omap_cfg_reg(USB1_TXD); + omap_cfg_reg(USB1_TXEN); + if (nwires != 3) + omap_cfg_reg(USB1_RCV); + } + if (cpu_is_omap15xx()) { omap_cfg_reg(USB1_SEO); omap_cfg_reg(USB1_SPEED); @@ -190,20 +244,38 @@ static u32 __init omap_usb1_init(unsigned nwires) } else if (cpu_is_omap1710()) { omap_cfg_reg(R13_1710_USB1_SE0); // SUSP + } else if (cpu_is_omap24xx()) { + /* NOTE: board-specific code must set up pin muxing for usb1, + * since each signal could come out on either of two balls. + */ } else { - pr_debug("usb unrecognized\n"); + pr_debug("usb%d cpu unrecognized\n", 1); + return 0; } - if (nwires != 3) - omap_cfg_reg(USB1_RCV); switch (nwires) { + case 2: + if (!cpu_is_omap24xx()) + goto bad; + /* NOTE: board-specific code must override this setting if + * this TLL link is not using DP/DM + */ + syscon1 = 1; + CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR_TLL); + break; case 3: syscon1 = 2; + if (cpu_is_omap24xx()) + CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR); break; case 4: syscon1 = 1; + if (cpu_is_omap24xx()) + CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR); break; case 6: + if (cpu_is_omap24xx()) + goto bad; syscon1 = 3; omap_cfg_reg(USB1_VP); omap_cfg_reg(USB1_VM); @@ -211,6 +283,7 @@ static u32 __init omap_usb1_init(unsigned nwires) USB_TRANSCEIVER_CTRL_REG |= CONF_USB1_UNI_R; break; default: +bad: printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", 1, nwires); } @@ -221,10 +294,17 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup) { u32 syscon1 = 0; - /* NOTE erratum: must leave USB2_UNI_R set if usb0 in use */ + if (cpu_is_omap24xx()) { + CONTROL_DEVCONF_REG &= ~(USBT2WRMODEI(USB_BIDIR_TLL) + | USBT2TLL5PI); + alt_pingroup = 0; + } + + /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */ if (alt_pingroup || nwires == 0) return 0; - if (nwires != 6 && !cpu_is_omap15xx()) + + if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R; /* external transceiver */ @@ -242,19 +322,54 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup) if (nwires != 3) omap_cfg_reg(Y5_USB2_RCV); // FIXME omap_cfg_reg(USB2_SPEED); + } else if (cpu_is_omap24xx()) { + omap_cfg_reg(Y11_24XX_USB2_DAT); + omap_cfg_reg(AA10_24XX_USB2_SE0); + if (nwires > 2) + omap_cfg_reg(AA12_24XX_USB2_TXEN); + if (nwires > 3) + omap_cfg_reg(AA6_24XX_USB2_RCV); } else { - pr_debug("usb unrecognized\n"); + pr_debug("usb%d cpu unrecognized\n", 1); + return 0; } - // omap_cfg_reg(USB2_SUSP); + // if (cpu_class_is_omap1()) omap_cfg_reg(USB2_SUSP); switch (nwires) { + case 2: + if (!cpu_is_omap24xx()) + goto bad; + /* NOTE: board-specific code must override this setting if + * this TLL link is not using DP/DM + */ + syscon1 = 1; + CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR_TLL); + break; case 3: syscon1 = 2; + if (cpu_is_omap24xx()) + CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR); break; case 4: syscon1 = 1; + if (cpu_is_omap24xx()) + CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR); + break; + case 5: + if (!cpu_is_omap24xx()) + goto bad; + omap_cfg_reg(AA4_24XX_USB2_TLLSE0); + /* NOTE: board-specific code must override this setting if + * this TLL link is not using DP/DM. Something must also + * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED} + */ + syscon1 = 3; + CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_UNIDIR_TLL) + | USBT2TLL5PI; break; case 6: + if (cpu_is_omap24xx()) + goto bad; syscon1 = 3; if (cpu_is_omap15xx()) { omap_cfg_reg(USB2_VP); @@ -266,6 +381,7 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup) } break; default: +bad: printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", 2, nwires); } @@ -294,13 +410,13 @@ static struct resource udc_resources[] = { .end = UDC_BASE + 0xff, .flags = IORESOURCE_MEM, }, { /* general IRQ */ - .start = IH2_BASE + 20, + .start = INT_USB_IRQ_GEN, .flags = IORESOURCE_IRQ, }, { /* PIO IRQ */ - .start = IH2_BASE + 30, + .start = INT_USB_IRQ_NISO, .flags = IORESOURCE_IRQ, }, { /* SOF IRQ */ - .start = IH2_BASE + 29, + .start = INT_USB_IRQ_ISO, .flags = IORESOURCE_IRQ, }, }; @@ -329,11 +445,11 @@ static u64 ohci_dmamask = ~(u32)0; static struct resource ohci_resources[] = { { .start = OMAP_OHCI_BASE, - .end = OMAP_OHCI_BASE + 4096 - 1, + .end = OMAP_OHCI_BASE + 0xff, .flags = IORESOURCE_MEM, }, { - .start = INT_USB_HHC_1, + .start = INT_USB_IRQ_HGEN, .flags = IORESOURCE_IRQ, }, }; @@ -361,7 +477,7 @@ static struct resource otg_resources[] = { .end = OTG_BASE + 0xff, .flags = IORESOURCE_MEM, }, { - .start = IH2_BASE + 8, + .start = INT_USB_IRQ_OTG, .flags = IORESOURCE_IRQ, }, }; @@ -385,7 +501,7 @@ static struct platform_device otg_device = { // FIXME correct answer depends on hmc_mode, -// as does any nonzero value for config->otg port number +// as does (on omap1) any nonzero value for config->otg port number #ifdef CONFIG_USB_GADGET_OMAP #define is_usb0_device(config) 1 #else @@ -426,12 +542,13 @@ omap_otg_init(struct omap_usb_config *config) if (config->otg) syscon |= OTG_EN; #endif - pr_debug("USB_TRANSCEIVER_CTRL_REG = %03x\n", USB_TRANSCEIVER_CTRL_REG); + if (cpu_class_is_omap1()) + pr_debug("USB_TRANSCEIVER_CTRL_REG = %03x\n", USB_TRANSCEIVER_CTRL_REG); pr_debug("OTG_SYSCON_2_REG = %08x\n", syscon); OTG_SYSCON_2_REG = syscon; printk("USB: hmc %d", config->hmc_mode); - if (alt_pingroup) + if (!alt_pingroup) printk(", usb2 alt %d wires", config->pins[2]); else if (config->pins[0]) printk(", usb0 %d wires%s", config->pins[0], @@ -444,10 +561,12 @@ omap_otg_init(struct omap_usb_config *config) printk(", Mini-AB on usb%d", config->otg - 1); printk("\n"); - /* leave USB clocks/controllers off until needed */ - ULPD_SOFT_REQ_REG &= ~SOFT_USB_CLK_REQ; - ULPD_CLOCK_CTRL_REG &= ~USB_MCLK_EN; - ULPD_CLOCK_CTRL_REG |= DIS_USB_PVCI_CLK; + if (cpu_class_is_omap1()) { + /* leave USB clocks/controllers off until needed */ + ULPD_SOFT_REQ_REG &= ~SOFT_USB_CLK_REQ; + ULPD_CLOCK_CTRL_REG &= ~USB_MCLK_EN; + ULPD_CLOCK_CTRL_REG |= DIS_USB_PVCI_CLK; + } syscon = OTG_SYSCON_1_REG; syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; @@ -585,7 +704,7 @@ omap_usb_init(void) } platform_data = *config; - if (cpu_is_omap730() || cpu_is_omap16xx()) + if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx()) omap_otg_init(&platform_data); else if (cpu_is_omap15xx()) omap_1510_usb_init(&platform_data); |