diff options
author | Tony Lindgren <tony@atomide.com> | 2006-04-02 17:46:23 +0100 |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2006-04-02 17:46:23 +0100 |
commit | 6e60e79a1d46eaa3369febc2f6c31e0acfaaae3f (patch) | |
tree | 38f59d144de2d3c61f21515647b6b066ed1477e2 /arch/arm/plat-omap/gpio.c | |
parent | 8d7f9f5037a09b8570d0c9e60a924ad2ba6fa7dd (diff) | |
download | linux-6e60e79a1d46eaa3369febc2f6c31e0acfaaae3f.tar.bz2 |
[ARM] 3429/1: ARM: OMAP: 4/8 Update GPIO
Patch from Tony Lindgren
Update OMAP GPIO code from linux-omap tree:
- Fix omap16xx edge control by Juha Yrjola
- Support for additional omap16xx trigger modes by Dirk Behme
- Fix edge detection by Tony Lindgren et al.
- Better support for omap15xx and omap310 by Andrej Zaborowski
- Fix omap15xx interrupt bug by Petukhov Nikolay
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/plat-omap/gpio.c')
-rw-r--r-- | arch/arm/plat-omap/gpio.c | 86 |
1 files changed, 61 insertions, 25 deletions
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index b4d5b9e4bfce..d3c8ea7eecfd 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -174,7 +174,7 @@ static int gpio_bank_count; static inline struct gpio_bank *get_gpio_bank(int gpio) { #ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; return &gpio_bank[1]; @@ -223,7 +223,7 @@ static inline int gpio_valid(int gpio) return 0; } #ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510() && gpio < 16) + if (cpu_is_omap15xx() && gpio < 16) return 0; #endif #if defined(CONFIG_ARCH_OMAP16XX) @@ -402,13 +402,13 @@ static inline void set_24xx_gpio_triggering(void __iomem *base, int gpio, int tr u32 gpio_bit = 1 << gpio; MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQT_LOW); + trigger & __IRQT_LOWLVL); MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQT_HIGH); + trigger & __IRQT_HIGHLVL); MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQT_RISING); + trigger & __IRQT_RISEDGE); MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQT_FALLING); + trigger & __IRQT_FALEDGE); /* FIXME: Possibly do 'set_irq_handler(j, do_level_IRQ)' if only level * triggering requested. */ } @@ -422,9 +422,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); - if (trigger == IRQT_RISING) + if (trigger & __IRQT_RISEDGE) l |= 1 << gpio; - else if (trigger == IRQT_FALLING) + else if (trigger & __IRQT_FALEDGE) l &= ~(1 << gpio); else goto bad; @@ -432,9 +432,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger == IRQT_RISING) + if (trigger & __IRQT_RISEDGE) l |= 1 << gpio; - else if (trigger == IRQT_FALLING) + else if (trigger & __IRQT_FALEDGE) l &= ~(1 << gpio); else goto bad; @@ -446,20 +446,21 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) reg += OMAP1610_GPIO_EDGE_CTRL1; gpio &= 0x07; /* We allow only edge triggering, i.e. two lowest bits */ - if (trigger & ~IRQT_BOTHEDGE) + if (trigger & (__IRQT_LOWLVL | __IRQT_HIGHLVL)) BUG(); - /* NOTE: knows __IRQT_{FAL,RIS}EDGE match OMAP hardware */ - trigger &= 0x03; l = __raw_readl(reg); l &= ~(3 << (gpio << 1)); - l |= trigger << (gpio << 1); + if (trigger & __IRQT_RISEDGE) + l |= 2 << (gpio << 1); + if (trigger & __IRQT_FALEDGE) + l |= 1 << (gpio << 1); break; case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger == IRQT_RISING) + if (trigger & __IRQT_RISEDGE) l |= 1 << gpio; - else if (trigger == IRQT_FALLING) + else if (trigger & __IRQT_FALEDGE) l &= ~(1 << gpio); else goto bad; @@ -491,7 +492,9 @@ static int gpio_irq_type(unsigned irq, unsigned type) if (check_gpio(gpio) < 0) return -EINVAL; - if (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL|IRQT_PROBE)) + if (type & IRQT_PROBE) + return -EINVAL; + if (!cpu_is_omap24xx() && (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL))) return -EINVAL; bank = get_gpio_bank(gpio); @@ -755,13 +758,32 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; #endif - while(1) { - isr = __raw_readl(isr_reg); - _enable_gpio_irqbank(bank, isr, 0); - _clear_gpio_irqbank(bank, isr); - _enable_gpio_irqbank(bank, isr, 1); - desc->chip->unmask(irq); + u32 isr_saved, level_mask = 0; + + isr_saved = isr = __raw_readl(isr_reg); + + if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) + isr &= 0x0000ffff; + + if (cpu_is_omap24xx()) + level_mask = + __raw_readl(bank->base + + OMAP24XX_GPIO_LEVELDETECT0) | + __raw_readl(bank->base + + OMAP24XX_GPIO_LEVELDETECT1); + + /* clear edge sensitive interrupts before handler(s) are + called so that we don't miss any interrupt occurred while + executing them */ + _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0); + _clear_gpio_irqbank(bank, isr_saved & ~level_mask); + _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1); + + /* if there is only edge sensitive GPIO pin interrupts + configured, we could unmask GPIO bank interrupt immediately */ + if (!level_mask) + desc->chip->unmask(irq); if (!isr) break; @@ -774,6 +796,20 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, d = irq_desc + gpio_irq; desc_handle_irq(gpio_irq, d, regs); } + + if (cpu_is_omap24xx()) { + /* clear level sensitive interrupts after handler(s) */ + _enable_gpio_irqbank(bank, isr_saved & level_mask, 0); + _clear_gpio_irqbank(bank, isr_saved & level_mask); + _enable_gpio_irqbank(bank, isr_saved & level_mask, 1); + } + + /* if bank has any level sensitive GPIO pin interrupt + configured, we must unmask the bank interrupt only after + handler(s) are executed in order to avoid spurious bank + interrupt */ + if (level_mask) + desc->chip->unmask(irq); } } @@ -848,7 +884,7 @@ static int __init _omap_gpio_init(void) initialized = 1; - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { gpio_ick = clk_get(NULL, "arm_gpio_ck"); if (IS_ERR(gpio_ick)) printk("Could not get arm_gpio_ck\n"); @@ -869,7 +905,7 @@ static int __init _omap_gpio_init(void) } #ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_INFO "OMAP1510 GPIO hardware\n"); gpio_bank_count = 2; gpio_bank = gpio_bank_1510; |