summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm/proc-v7.S
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@arm.linux.org.uk>2015-04-04 21:46:35 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2015-06-01 23:48:42 +0100
commitc76f238e261b8d088f086c2e8551fa8402d86f42 (patch)
tree116446fc98afa49e350b44685c30219f301b28d4 /arch/arm/mm/proc-v7.S
parent4419496884ed16fdeb122782d41f5ad38f8923cc (diff)
downloadlinux-c76f238e261b8d088f086c2e8551fa8402d86f42.tar.bz2
ARM: proc-v7: sanitise and document registers around errata
Document that r13 is not a stack in the initialisation function, in case anyone gets other ideas. Document the registers available for the errata workarounds, and specifically which registers contain parts of the MIDR register, as well as which registers must be preserved. Lastly, use the lowest numbered available register (r0) rather than r10 for temporary storage. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mm/proc-v7.S')
-rw-r--r--arch/arm/mm/proc-v7.S68
1 files changed, 38 insertions, 30 deletions
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 19c1c8b7c3bb..003190ae9cd8 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -252,7 +252,7 @@ ENDPROC(cpu_pj4b_do_resume)
* Initialise TLB, Caches, and MMU state ready to switch the MMU
* on. Return in r0 the new CP15 C1 control register setting.
*
- * r1, r2, r4, r5, r9 must be preserved.
+ * r1, r2, r4, r5, r9, r13 must be preserved - r13 is not a stack
* r4: TTBR0 (low word)
* r5: TTBR0 (high word if LPAE)
* r8: TTBR1
@@ -285,57 +285,65 @@ __v7_ca17mp_setup:
#endif
b __v7_setup
+/*
+ * Errata:
+ * r0, r10 available for use
+ * r1, r2, r4, r5, r9, r13: must be preserved
+ * r3: contains MIDR rX number in bits 23-20
+ * r6: contains MIDR rXpY as 8-bit XY number
+ * r9: MIDR
+ */
__ca8_errata:
#if defined(CONFIG_ARM_ERRATA_430973) && !defined(CONFIG_ARCH_MULTIPLATFORM)
teq r3, #0x00100000 @ only present in r1p*
- mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
- orreq r10, r10, #(1 << 6) @ set IBE to 1
- mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
+ mrceq p15, 0, r0, c1, c0, 1 @ read aux control register
+ orreq r0, r0, #(1 << 6) @ set IBE to 1
+ mcreq p15, 0, r0, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
teq r6, #0x20 @ only present in r2p0
- mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
- orreq r10, r10, #(1 << 5) @ set L1NEON to 1
- orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
- mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
+ mrceq p15, 0, r0, c1, c0, 1 @ read aux control register
+ orreq r0, r0, #(1 << 5) @ set L1NEON to 1
+ orreq r0, r0, #(1 << 9) @ set PLDNOP to 1
+ mcreq p15, 0, r0, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
teq r6, #0x20 @ only present in r2p0
- mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
- tsteq r10, #1 << 22
- orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
- mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
+ mrceq p15, 1, r0, c9, c0, 2 @ read L2 cache aux ctrl register
+ tsteq r0, #1 << 22
+ orreq r0, r0, #(1 << 22) @ set the Write Allocate disable bit
+ mcreq p15, 1, r0, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
b __errata_finish
__ca9_errata:
#ifdef CONFIG_ARM_ERRATA_742230
cmp r6, #0x22 @ only present up to r2p2
- mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register
- orrle r10, r10, #1 << 4 @ set bit #4
- mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register
+ mrcle p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orrle r0, r0, #1 << 4 @ set bit #4
+ mcrle p15, 0, r0, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_742231
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
- mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
- orreq r10, r10, #1 << 12 @ set bit #12
- orreq r10, r10, #1 << 22 @ set bit #22
- mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
+ mrceq p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orreq r0, r0, #1 << 12 @ set bit #12
+ orreq r0, r0, #1 << 22 @ set bit #22
+ mcreq p15, 0, r0, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_743622
teq r3, #0x00200000 @ only present in r2p*
- mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
- orreq r10, r10, #1 << 6 @ set bit #6
- mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
+ mrceq p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orreq r0, r0, #1 << 6 @ set bit #6
+ mcreq p15, 0, r0, c15, c0, 1 @ write diagnostic register
#endif
#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
ALT_SMP(cmp r6, #0x30) @ present prior to r3p0
ALT_UP_B(1f)
- mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register
- orrlt r10, r10, #1 << 11 @ set bit #11
- mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register
+ mrclt p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orrlt r0, r0, #1 << 11 @ set bit #11
+ mcrlt p15, 0, r0, c15, c0, 1 @ write diagnostic register
1:
#endif
b __errata_finish
@@ -343,9 +351,9 @@ __ca9_errata:
__ca15_errata:
#ifdef CONFIG_ARM_ERRATA_773022
cmp r6, #0x4 @ only present up to r0p4
- mrcle p15, 0, r10, c1, c0, 1 @ read aux control register
- orrle r10, r10, #1 << 1 @ disable loop buffer
- mcrle p15, 0, r10, c1, c0, 1 @ write aux control register
+ mrcle p15, 0, r0, c1, c0, 1 @ read aux control register
+ orrle r0, r0, #1 << 1 @ disable loop buffer
+ mcrle p15, 0, r0, c1, c0, 1 @ write aux control register
#endif
b __errata_finish
@@ -409,8 +417,8 @@ __v7_setup:
bl v7_flush_dcache_louis
ldmia r12, {r0-r5, r7, r9, r11, lr}
- and r10, r9, #0xff000000 @ ARM?
- teq r10, #0x41000000
+ and r0, r9, #0xff000000 @ ARM?
+ teq r0, #0x41000000
bne __errata_finish
and r3, r9, #0x00f00000 @ variant
and r6, r9, #0x0000000f @ revision