Merge branch 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits)
  ARM: S5P64X0: External Interrupt Support
  ARM: EXYNOS4: Enable MFC on Samsung NURI
  ARM: EXYNOS4: Enable MFC on universal_c210
  ARM: S5PV210: Enable MFC on Goni
  ARM: S5P: Add support for MFC device
  ARM: EXYNOS4: Add support FIMD on SMDKC210
  ARM: EXYNOS4: Add platform device and helper functions for FIMD
  ARM: EXYNOS4: Add resource definition for FIMD
  ARM: EXYNOS4: Change devname for FIMD clkdev
  ARM: SAMSUNG: Add IRQ_I2S0 definition
  ARM: SAMSUNG: Add platform device for idma
  ARM: EXYNOS4: Add more registers to be saved and restored for PM
  ARM: EXYNOS4: Add more register addresses of CMU
  ARM: EXYNOS4: Add platform device for dwmci driver
  ARM: EXYNOS4: configure rtc-s3c on NURI
  ARM: EXYNOS4: configure MAX8903 secondary charger on NURI
  ARM: EXYNOS4: configure ADC on NURI
  ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI
  ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI
  ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs
  ...

Fix up tons of silly conflicts:
 - arch/arm/mach-davinci/include/mach/psc.h
 - arch/arm/mach-exynos4/Kconfig
 - arch/arm/mach-exynos4/mach-smdkc210.c
 - arch/arm/mach-exynos4/pm.c
 - arch/arm/mach-imx/mm-imx1.c
 - arch/arm/mach-imx/mm-imx21.c
 - arch/arm/mach-imx/mm-imx25.c
 - arch/arm/mach-imx/mm-imx27.c
 - arch/arm/mach-imx/mm-imx31.c
 - arch/arm/mach-imx/mm-imx35.c
 - arch/arm/mach-mx5/mm.c
 - arch/arm/mach-s5pv210/mach-goni.c
 - arch/arm/mm/Kconfig

2 files changed, 14 insertions, 23 deletions

diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
index 5767208f1c1d..7b597e2b19e2 100644
--- a/arch/arm/mach-u300/spi.c
+++ b/arch/arm/mach-u300/spi.c
@@ -40,8 +40,8 @@ struct pl022_config_chip dummy_chip_info = {
 	.hierarchy = SSP_MASTER,
 	/* 0 = drive TX even as slave, 1 = do not drive TX as slave */
 	.slave_tx_disable = 0,
-	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
-	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+	.rx_lev_trig = SSP_RX_4_OR_MORE_ELEM,
+	.tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC,
 	.ctrl_len = SSP_BITS_12,
 	.wait_state = SSP_MWIRE_WAIT_ZERO,
 	.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 18d7fa0603c2..5f51bdeef0ef 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -27,9 +27,6 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define APPTIMER_MIN_RANGE 4
-
 /*
  * APP side special timer registers
  * This timer contains four timers which can fire an interrupt each.
@@ -309,11 +306,11 @@ static int u300_set_next_event(unsigned long cycles,
 
 /* Use general purpose timer 1 as clock event */
 static struct clock_event_device clockevent_u300_1mhz = {
-	.name           = "GPT1",
-	.rating         = 300, /* Reasonably fast and accurate clock event */
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event = u300_set_next_event,
-	.set_mode       = u300_set_mode,
+	.name		= "GPT1",
+	.rating		= 300, /* Reasonably fast and accurate clock event */
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event	= u300_set_next_event,
+	.set_mode	= u300_set_mode,
 };
 
 /* Clock event timer interrupt handler */
@@ -328,9 +325,9 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
 }
 
 static struct irqaction u300_timer_irq = {
-	.name           = "U300 Timer Tick",
-	.flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler        = u300_timer_interrupt,
+	.name		= "U300 Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= u300_timer_interrupt,
 };
 
 /*
@@ -413,16 +410,10 @@ static void __init u300_timer_init(void)
 			"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
 		pr_err("timer: failed to initialize U300 clock source\n");
 
-	clockevents_calc_mult_shift(&clockevent_u300_1mhz,
-				    rate, APPTIMER_MIN_RANGE);
-	/* 32bit counter, so 32bits delta is max */
-	clockevent_u300_1mhz.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
-	/* This timer is slow enough to set for 1 cycle == 1 MHz */
-	clockevent_u300_1mhz.min_delta_ns =
-		clockevent_delta2ns(1, &clockevent_u300_1mhz);
-	clockevent_u300_1mhz.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_u300_1mhz);
+	/* Configure and register the clockevent */
+	clockevents_config_and_register(&clockevent_u300_1mhz, rate,
+					1, 0xffffffff);
+
 	/*
 	 * TODO: init and register the rest of the timers too, they can be
 	 * used by hrtimers!