summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-tegra/sleep-tegra30.S
diff options
context:
space:
mode:
authorJoseph Lo <josephl@nvidia.com>2012-10-31 17:41:21 +0800
committerStephen Warren <swarren@nvidia.com>2012-11-15 15:09:22 -0700
commitd552920a02759cdc45d8507868de10ac2f5b9a18 (patch)
tree2c3c5f805e1657f64088631e63c145cc43739608 /arch/arm/mach-tegra/sleep-tegra30.S
parent01459c69dd48badeb7833c3293e43f7b8ae75e31 (diff)
downloadlinux-d552920a02759cdc45d8507868de10ac2f5b9a18.tar.bz2
ARM: tegra30: cpuidle: add powered-down state for CPU0
This is a power gating idle mode. It support power gating vdd_cpu rail after all cpu cores in "powered-down" status. For Tegra30, the CPU0 can enter this state only when all secondary CPU is offline. We need to take care and make sure whole secondary CPUs were offline and checking the CPU power gate status. After that, the CPU0 can go into "powered-down" state safely. Then shut off the CPU rail. Be aware of that, you may see the legacy power state "LP2" in the code which is exactly the same meaning of "CPU power down". Base on the work by: Scott Williams <scwilliams@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
Diffstat (limited to 'arch/arm/mach-tegra/sleep-tegra30.S')
-rw-r--r--arch/arm/mach-tegra/sleep-tegra30.S44
1 files changed, 44 insertions, 0 deletions
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 59984d718481..562a8e7e413d 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -124,4 +124,48 @@ ENTRY(tegra30_sleep_cpu_secondary_finish)
mov r0, #1 @ never return here
mov pc, r7
ENDPROC(tegra30_sleep_cpu_secondary_finish)
+
+/*
+ * tegra30_tear_down_cpu
+ *
+ * Switches the CPU to enter sleep.
+ */
+ENTRY(tegra30_tear_down_cpu)
+ mov32 r6, TEGRA_FLOW_CTRL_BASE
+
+ b tegra30_enter_sleep
+ENDPROC(tegra30_tear_down_cpu)
+
+/*
+ * tegra30_enter_sleep
+ *
+ * uses flow controller to enter sleep state
+ * executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1
+ * executes from SDRAM with target state is LP2
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ */
+tegra30_enter_sleep:
+ cpu_id r1
+
+ cpu_to_csr_reg r2, r1
+ ldr r0, [r6, r2]
+ orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+ orr r0, r0, #FLOW_CTRL_CSR_ENABLE
+ str r0, [r6, r2]
+
+ mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
+ orr r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
+ cpu_to_halt_reg r2, r1
+ str r0, [r6, r2]
+ dsb
+ ldr r0, [r6, r2] /* memory barrier */
+
+halted:
+ isb
+ dsb
+ wfi /* CPU should be power gated here */
+
+ /* !!!FIXME!!! Implement halt failure handler */
+ b halted
+
#endif