Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...

1 files changed, 62 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx
new file mode 100644
index 000000000000..0c18e31936df
--- /dev/null
+++ b/arch/arm/mach-s3c/Makefile.s3c64xx
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
+# PM
+
+obj-$(CONFIG_PM)		+= pm-s3c64xx.o
+obj-$(CONFIG_PM_SLEEP)		+= sleep-s3c64xx.o
+obj-$(CONFIG_CPU_IDLE)		+= cpuidle-s3c64xx.o
+
+ifdef CONFIG_SAMSUNG_ATAGS
+
+obj-$(CONFIG_PM_SLEEP)          += irq-pm-s3c64xx.o
+
+# Core
+
+obj-y				+= s3c64xx.o
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
+obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_PL080)	+= pl080.o
+
+# Device support
+
+obj-y				+= dev-uart-s3c64xx.o
+obj-y				+= dev-audio-s3c64xx.o
+
+# Device setup
+
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP)	+= setup-fb-24bpp-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C0)	+= setup-i2c0-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1)	+= setup-i2c1-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE)		+= setup-ide-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD)	+= setup-keypad-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_SPI)		+= setup-spi-s3c64xx.o
+obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o
+
+obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight-s3c64xx.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANW6410)		+= mach-anw6410.o
+obj-$(CONFIG_MACH_HMT)			+= mach-hmt.o
+obj-$(CONFIG_MACH_MINI6410)		+= mach-mini6410.o
+obj-$(CONFIG_MACH_NCP)			+= mach-ncp.o
+obj-$(CONFIG_MACH_REAL6410)		+= mach-real6410.o
+obj-$(CONFIG_MACH_SMARTQ)		+= mach-smartq.o
+obj-$(CONFIG_MACH_SMARTQ5)		+= mach-smartq5.o
+obj-$(CONFIG_MACH_SMARTQ7)		+= mach-smartq7.o
+obj-$(CONFIG_MACH_SMDK6400)		+= mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410)		+= mach-smdk6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410)	+= mach-crag6410.o mach-crag6410-module.o
+endif
+
+obj-$(CONFIG_MACH_S3C64XX_DT)		+= mach-s3c64xx-dt.o