Merge tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux

Pull fbdev changes from Tomi Valkeinen:
 "OMAPDSS changes, including:
   - use dynanic debug prints
   - OMAP platform dependency removals
   - Creation of compat-layer, helping us to improve omapdrm
   - Misc cleanups, aiming to make omadss more in line with the upcoming
     common display framework

  Exynos DP changes for the 3.8 merge window:
   - Device Tree support for Samsung Exynos DP
   - SW Link training is cleaned up.
   - HPD interrupt is supported.

  Samsung Framebuffer changes for the 3.8 merge window:
   - The bit definitions of header file are updated.
   - Some minor typos are fixed.
   - Some minor bugs of s3c_fb_check_var() are fixed.

  FB related changes for SH Mobile, Freescale DIU

  Add support for the Solomon SSD1307 OLED Controller"

* tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (191 commits)
  OMAPDSS: fix TV-out issue with DSI PLL
  Revert "OMAPFB: simplify locking"
  OMAPFB: remove silly loop in fb2display()
  OMAPFB: fix error handling in omapfb_find_best_mode()
  OMAPFB: use devm_kzalloc to allocate omapfb2_device
  OMAPDSS: DISPC: remove dispc fck uses
  OMAPDSS: DISPC: get dss clock rate from dss driver
  drivers/video/console/softcursor.c: remove redundant NULL check before kfree()
  drivers/video: add support for the Solomon SSD1307 OLED Controller
  OMAPDSS: use omapdss_compat_init() in other drivers
  OMAPDSS: export dispc functions
  OMAPDSS: export dss_feat functions
  OMAPDSS: export dss_mgr_ops functions
  OMAPDSS: separate compat files in the Makefile
  OMAPDSS: move display sysfs init to compat layer
  OMAPDSS: DPI: use dispc's check_timings
  OMAPDSS: DISPC: add dispc_ovl_check()
  OMAPDSS: move irq handling to dispc-compat
  OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c
  OMAPDSS: move blocking mgr enable/disable to compat layer
  ...

Conflicts:
	arch/arm/mach-davinci/devices-da8xx.c
	arch/arm/plat-omap/common.c
	drivers/media/platform/omap/omap_vout.c

3 files changed, 10 insertions, 22 deletions

diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index c22e111bcd00..46f4fc982766 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 #include <asm/mach-types.h>
 #include <video/omapdss.h>
-#include <plat/vram.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include "board-rx51.h"
@@ -87,17 +86,4 @@ static int __init rx51_video_init(void)
 }
 
 subsys_initcall(rx51_video_init);
-
-void __init rx51_video_mem_init(void)
-{
-	/*
-	 * GFX 864x480x32bpp
-	 * VID1/2 1280x720x32bpp double buffered
-	 */
-	omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) +
-			2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0);
-}
-
-#else
-void __init rx51_video_mem_init(void) { }
 #endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index f1d6efe079ca..d0374ea2dfb0 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -34,8 +34,6 @@
 
 #define RX51_GPIO_SLEEP_IND 162
 
-extern void rx51_video_mem_init(void);
-
 static struct gpio_led gpio_leds[] = {
 	{
 		.name	= "sleep_ind",
@@ -112,7 +110,6 @@ static void __init rx51_init(void)
 
 static void __init rx51_reserve(void)
 {
-	rx51_video_mem_init();
 	omap_reserve();
 }
 
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 38ba58c97628..cc75aaf6e764 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -102,17 +102,20 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
 };
 
-static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
+static void __init omap4_tpd12s015_mux_pads(void)
 {
-	u32 reg;
-	u16 control_i2c_1;
-
 	omap_mux_init_signal("hdmi_cec",
 			OMAP_PIN_INPUT_PULLUP);
 	omap_mux_init_signal("hdmi_ddc_scl",
 			OMAP_PIN_INPUT_PULLUP);
 	omap_mux_init_signal("hdmi_ddc_sda",
 			OMAP_PIN_INPUT_PULLUP);
+}
+
+static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
+{
+	u32 reg;
+	u16 control_i2c_1;
 
 	/*
 	 * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and
@@ -163,8 +166,10 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 
 int __init omap_hdmi_init(enum omap_hdmi_flags flags)
 {
-	if (cpu_is_omap44xx())
+	if (cpu_is_omap44xx()) {
 		omap4_hdmi_mux_pads(flags);
+		omap4_tpd12s015_mux_pads();
+	}
 
 	return 0;
 }