ARM: arm-soc: Merge branch 'next/clk' into next/pm

Merge together a couple of the smaller pm/clock branches into one.

Signed-off-by: Olof Johansson <olof@lixom.net>

47 files changed, 1601 insertions, 121 deletions

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index e255164ff087..a8fce3ccc707 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -625,7 +625,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	.atag_offset	= 0x100,
 	.map_io		= ams_delta_map_io,
 	.init_early	= omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= ams_delta_init,
 	.init_late	= ams_delta_init_late,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 4b6de70c47a6..8b5800acf726 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -27,10 +27,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
 #include <mach/flash.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
@@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = {
 
 static void __init fsample_init_smc91x(void)
 {
-	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
 	mdelay(50);
-	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
 		   H2P2_DBG_FPGA_LAN_RESET);
 	mdelay(50);
 }
@@ -362,7 +362,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 	.atag_offset	= 0x100,
 	.map_io		= omap_fsample_map_io,
 	.init_early	= omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_fsample_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 4ec579fdd366..608e7d2a2778 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -81,7 +81,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	.atag_offset	= 0x100,
 	.map_io		= omap16xx_map_io,
 	.init_early	= omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index e1362ce48497..7119ef28e0ad 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -13,12 +13,11 @@
  */
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
-
+#include <linux/platform_data/gpio-omap.h>
 #include <linux/i2c/tps65010.h>
 
-#include <plat/mmc.h>
-
 #include "board-h2.h"
+#include "mmc.h"
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 376f7f29ef77..9134b646f01b 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -39,8 +39,8 @@
 #include <asm/mach/map.h>
 
 #include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <mach/flash.h>
@@ -50,6 +50,7 @@
 
 #include "common.h"
 #include "board-h2.h"
+#include "dma.h"
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define OMAP1610_ETHR_START		0x04000300
@@ -458,7 +459,6 @@ MACHINE_START(OMAP_H2, "TI-H2")
 	.atag_offset	= 0x100,
 	.map_io		= omap16xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= h2_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index c74daace8cd6..17d77914d769 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -16,9 +16,8 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <plat/mmc.h>
-
 #include "board-h3.h"
+#include "mmc.h"
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index ededdb7ef28c..bf213d1d8075 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/flash.h>
 
 #include <mach/hardware.h>
@@ -452,7 +452,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	.atag_offset	= 0x100,
 	.map_io		= omap16xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= h3_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 87ab2086ef96..356f816c84a6 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -43,7 +43,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/omap7xx.h>
-#include <plat/mmc.h>
+#include "mmc.h"
 
 #include <mach/irqs.h>
 #include <mach/usb.h>
@@ -600,7 +600,6 @@ MACHINE_START(HERALD, "HTC Herald")
 	.atag_offset    = 0x100,
 	.map_io         = htcherald_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq       = omap1_init_irq,
 	.init_machine   = htcherald_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index db5f7d2976e7..c66334f22471 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -33,16 +33,16 @@
 
 #include <mach/mux.h>
 #include <mach/flash.h>
-#include <plat/fpga.h>
-#include <plat/tc.h>
+#include <../plat-omap/fpga.h>
+#include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
-#include <plat/mmc.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
 
 #include "iomap.h"
 #include "common.h"
+#include "mmc.h"
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define INNOVATOR1610_ETHR_START	0x04000300
@@ -215,7 +215,7 @@ static struct platform_device *innovator1510_devices[] __initdata = {
 
 static int innovator_get_pendown_state(void)
 {
-	return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+	return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
 }
 
 static const struct ads7846_platform_data innovator1510_ts_info = {
@@ -279,7 +279,7 @@ static struct platform_device *innovator1610_devices[] __initdata = {
 static void __init innovator_init_smc91x(void)
 {
 	if (cpu_is_omap1510()) {
-		fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
 			   OMAP1510_FPGA_RST);
 		udelay(750);
 	} else {
@@ -335,10 +335,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
 	if (power_on)
-		fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
 				OMAP1510_FPGA_POWER);
 	else
-		fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
 				OMAP1510_FPGA_POWER);
 
 	return 0;
@@ -390,14 +390,14 @@ static void __init innovator_init(void)
 		omap_cfg_reg(UART3_TX);
 		omap_cfg_reg(UART3_RX);
 
-		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg = __raw_readb(OMAP1510_FPGA_POWER);
 		reg |= OMAP1510_FPGA_PCR_COM1_EN;
-		fpga_write(reg, OMAP1510_FPGA_POWER);
+		__raw_writeb(reg, OMAP1510_FPGA_POWER);
 		udelay(10);
 
-		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg = __raw_readb(OMAP1510_FPGA_POWER);
 		reg |= OMAP1510_FPGA_PCR_COM2_EN;
-		fpga_write(reg, OMAP1510_FPGA_POWER);
+		__raw_writeb(reg, OMAP1510_FPGA_POWER);
 		udelay(10);
 
 		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
@@ -437,6 +437,7 @@ static void __init innovator_init(void)
  */
 static void __init innovator_map_io(void)
 {
+#ifdef CONFIG_ARCH_OMAP15XX
 	omap15xx_map_io();
 
 	iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
@@ -444,9 +445,10 @@ static void __init innovator_map_io(void)
 
 	/* Dump the Innovator FPGA rev early - useful info for support. */
 	pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
-			fpga_read(OMAP1510_FPGA_REV_HIGH),
-			fpga_read(OMAP1510_FPGA_REV_LOW),
-			fpga_read(OMAP1510_FPGA_BOARD_REV));
+			__raw_readb(OMAP1510_FPGA_REV_HIGH),
+			__raw_readb(OMAP1510_FPGA_REV_LOW),
+			__raw_readb(OMAP1510_FPGA_BOARD_REV));
+#endif
 }
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
@@ -454,7 +456,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	.atag_offset	= 0x100,
 	.map_io		= innovator_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= innovator_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 7d5c06d6a52a..3e8ead67e459 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -29,13 +29,13 @@
 #include <asm/mach/map.h>
 
 #include <mach/mux.h>
-#include <plat/mmc.h>
-#include <plat/clock.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
 
 #include "common.h"
+#include "clock.h"
+#include "mmc.h"
 
 #define ADS7846_PENDOWN_GPIO	15
 
@@ -251,7 +251,6 @@ MACHINE_START(NOKIA770, "Nokia 770")
 	.atag_offset	= 0x100,
 	.map_io		= omap16xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_nokia770_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5973945a8741..872ea47cd28a 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -48,7 +48,7 @@
 
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -606,7 +606,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
 	.atag_offset	= 0x100,
 	.map_io		= omap16xx_map_io,
 	.init_early	= omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= osk_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 1c578d58923a..584b6fab894b 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -36,8 +36,8 @@
 
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
-#include <plat/dma.h>
+#include <mach/tc.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
 
@@ -45,6 +45,7 @@
 #include <mach/usb.h>
 
 #include "common.h"
+#include "dma.h"
 
 #define PALMTE_USBDETECT_GPIO	0
 #define PALMTE_USB_OR_DC_GPIO	1
@@ -264,7 +265,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.atag_offset	= 0x100,
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmte_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 97158095083c..fbc986bfe69e 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -28,16 +28,16 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/platform_data/omap1_bl.h>
+#include <linux/platform_data/leds-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/led.h>
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
 
@@ -45,6 +45,7 @@
 #include <mach/usb.h>
 
 #include "common.h"
+#include "dma.h"
 
 #define PALMTT_USBDETECT_GPIO	0
 #define PALMTT_CABLE_GPIO	1
@@ -310,7 +311,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.atag_offset	= 0x100,
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmtt_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e311032e7eeb..60d917a93763 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -38,8 +38,8 @@
 
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
 
@@ -47,6 +47,7 @@
 #include <mach/usb.h>
 
 #include "common.h"
+#include "dma.h"
 
 #define PALMZ71_USBDETECT_GPIO	0
 #define PALMZ71_PENIRQ_GPIO	6
@@ -326,7 +327,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
 	.atag_offset	= 0x100,
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmz71_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 198b05417bfc..030bd48727be 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -28,9 +28,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
 #include <mach/flash.h>
 
 #include <mach/hardware.h>
@@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = {
 
 static void __init perseus2_init_smc91x(void)
 {
-	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
 	mdelay(50);
-	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
 		   H2P2_DBG_FPGA_LAN_RESET);
 	mdelay(50);
 }
@@ -324,7 +324,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	.atag_offset	= 0x100,
 	.map_io		= omap_perseus2_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_perseus2_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 5932d56e17bf..4fcf19c78a08 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -16,9 +16,10 @@
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
-#include <plat/mmc.h>
 #include <mach/board-sx1.h>
 
+#include "mmc.h"
+
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 13bf2cc56814..1ebc7e08d6e5 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -36,15 +36,16 @@
 
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/irda.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/board-sx1.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
 
 #include "common.h"
+#include "dma.h"
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
@@ -403,7 +404,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.atag_offset	= 0x100,
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_sx1_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index ad75e3411d46..abf705f49b19 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -34,7 +34,7 @@
 #include <mach/board-voiceblue.h>
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -286,7 +286,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	.atag_offset	= 0x100,
 	.map_io		= omap15xx_map_io,
 	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
 	.init_machine	= voiceblue_init,
 	.init_late	= omap1_init_late,
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 638f4070fc70..931f3f6d396b 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -12,6 +12,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
@@ -21,14 +22,11 @@
 
 #include <asm/mach-types.h>
 
-#include <plat/cpu.h>
-#include <plat/usb.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/clkdev_omap.h>
-
 #include <mach/hardware.h>
 
+#include "../plat-omap/sram.h"
+
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "opp.h"
@@ -36,6 +34,10 @@
 __u32 arm_idlect1_mask;
 struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
+
 /*
  * Omap1 specific clock functions
  */
@@ -607,3 +609,497 @@ void omap1_clk_disable_unused(struct clk *clk)
 }
 
 #endif
+
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+	int ret;
+
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = omap1_clk_enable(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (clk->usecount == 0) {
+		pr_err("Trying disable clock %s with 0 usecount\n",
+		       clk->name);
+		WARN_ON(1);
+		goto out;
+	}
+
+	omap1_clk_disable(clk);
+
+out:
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long flags;
+	unsigned long ret;
+
+	if (clk == NULL || IS_ERR(clk))
+		return 0;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = clk->rate;
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	long ret;
+
+	if (clk == NULL || IS_ERR(clk))
+		return 0;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = omap1_clk_round_rate(clk, rate);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	if (clk == NULL || IS_ERR(clk))
+		return ret;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = omap1_clk_set_rate(clk, rate);
+	if (ret == 0)
+		propagate_rate(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n");
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+
+int __initdata mpurate;
+
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+	get_option(&str, &mpurate);
+
+	if (!mpurate)
+		return 1;
+
+	if (mpurate < 1000)
+		mpurate *= 1000000;
+
+	return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+	return clk->parent->rate;
+}
+
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+	WARN_ON(!clk->fixed_div);
+
+	return clk->parent->rate / clk->fixed_div;
+}
+
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+	list_del_init(&child->sibling);
+	if (parent)
+		list_add(&child->sibling, &parent->children);
+	child->parent = parent;
+
+	/* now do the debugfs renaming to reattach the child
+	   to the proper parent */
+}
+
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &tclk->children, sibling) {
+		if (clkp->recalc)
+			clkp->rate = clkp->recalc(clkp);
+		propagate_rate(clkp);
+	}
+}
+
+static LIST_HEAD(root_clks);
+
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &root_clks, sibling) {
+		if (clkp->recalc)
+			clkp->rate = clkp->recalc(clkp);
+		propagate_rate(clkp);
+	}
+}
+
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run.  No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+	INIT_LIST_HEAD(&clk->children);
+}
+
+int clk_register(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	/*
+	 * trap out already registered clocks
+	 */
+	if (clk->node.next || clk->node.prev)
+		return 0;
+
+	mutex_lock(&clocks_mutex);
+	if (clk->parent)
+		list_add(&clk->sibling, &clk->parent->children);
+	else
+		list_add(&clk->sibling, &root_clks);
+
+	list_add(&clk->node, &clocks);
+	if (clk->init)
+		clk->init(clk);
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
+	mutex_lock(&clocks_mutex);
+	list_del(&clk->sibling);
+	list_del(&clk->node);
+	mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+void clk_enable_init_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &clocks, node)
+		if (clkp->flags & ENABLE_ON_INIT)
+			clk_enable(clkp);
+}
+
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name.  Assumes that struct clk
+ * names are unique.  Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+	struct clk *c;
+	struct clk *ret = NULL;
+
+	mutex_lock(&clocks_mutex);
+
+	list_for_each_entry(c, &clocks, node) {
+		if (!strcmp(c->name, name)) {
+			ret = c;
+			break;
+		}
+	}
+
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+
+int omap_clk_enable_autoidle_all(void)
+{
+	struct clk *c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+
+	list_for_each_entry(c, &clocks, node)
+		if (c->ops->allow_idle)
+			c->ops->allow_idle(c);
+
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return 0;
+}
+
+int omap_clk_disable_autoidle_all(void)
+{
+	struct clk *c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+
+	list_for_each_entry(c, &clocks, node)
+		if (c->ops->deny_idle)
+			c->ops->deny_idle(c);
+
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return 0;
+}
+
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+	return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+	.enable		= clkll_enable_null,
+	.disable	= clkll_disable_null,
+};
+
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+	.name	= "dummy",
+	.ops	= &clkops_null,
+};
+
+/*
+ *
+ */
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+	struct clk *ck;
+	unsigned long flags;
+
+	pr_info("clock: disabling unused clocks to save power\n");
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	list_for_each_entry(ck, &clocks, node) {
+		if (ck->ops == &clkops_null)
+			continue;
+
+		if (ck->usecount > 0 || !ck->enable_reg)
+			continue;
+
+		omap1_clk_disable_unused(ck);
+	}
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ *	debugfs support to trace clock tree hierarchy and attributes
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static struct dentry *clk_debugfs_root;
+
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+	struct clk *c;
+	struct clk *pa;
+
+	mutex_lock(&clocks_mutex);
+	seq_printf(s, "%-30s %-30s %-10s %s\n",
+		   "clock-name", "parent-name", "rate", "use-count");
+
+	list_for_each_entry(c, &clocks, node) {
+		pa = c->parent;
+		seq_printf(s, "%-30s %-30s %-10lu %d\n",
+			   c->name, pa ? pa->name : "none", c->rate,
+			   c->usecount);
+	}
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
+
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+
+static const struct file_operations debug_clock_fops = {
+	.open           = clk_dbg_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+	int err;
+	struct dentry *d;
+	struct clk *pa = c->parent;
+
+	d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+	if (!d)
+		return -ENOMEM;
+	c->dent = d;
+
+	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	return 0;
+
+err_out:
+	debugfs_remove_recursive(c->dent);
+	return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+	int err;
+	struct clk *pa = c->parent;
+
+	if (pa && !pa->dent) {
+		err = clk_debugfs_register(pa);
+		if (err)
+			return err;
+	}
+
+	if (!c->dent) {
+		err = clk_debugfs_register_one(c);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+	struct clk *c;
+	struct dentry *d;
+	int err;
+
+	d = debugfs_create_dir("clock", NULL);
+	if (!d)
+		return -ENOMEM;
+	clk_debugfs_root = d;
+
+	list_for_each_entry(c, &clocks, node) {
+		err = clk_debugfs_register(c);
+		if (err)
+			goto err_out;
+	}
+
+	d = debugfs_create_file("summary", S_IRUGO,
+		d, NULL, &debug_clock_fops);
+	if (!d)
+		return -ENOMEM;
+
+	return 0;
+err_out:
+	debugfs_remove_recursive(clk_debugfs_root);
+	return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 3d04f4f67676..1e4918a3a5ee 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -14,8 +14,184 @@
 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H
 
 #include <linux/clk.h>
+#include <linux/list.h>
 
-#include <plat/clock.h>
+#include <linux/clkdev.h>
+
+struct module;
+struct clk;
+
+struct omap_clk {
+	u16				cpu;
+	struct clk_lookup		lk;
+};
+
+#define CLK(dev, con, ck, cp)		\
+	{				\
+		 .cpu = cp,		\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
+
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_310		(1 << 0)
+#define CK_7XX		(1 << 1)	/* 7xx, 850 */
+#define CK_1510		(1 << 2)
+#define CK_16XX		(1 << 3)	/* 16xx, 17xx, 5912 */
+#define CK_1710		(1 << 4)	/* 1710 extra for rate selection */
+
+
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk)	(clk->name)
+#define __clk_get_parent(clk)	(clk->parent)
+#define __clk_get_rate(clk)	(clk->rate)
+
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware.  Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+	int			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+	void			(*find_idlest)(struct clk *, void __iomem **,
+					       u8 *, u8 *);
+	void			(*find_companion)(struct clk *, void __iomem **,
+						  u8 *);
+	void			(*allow_idle)(struct clk *);
+	void			(*deny_idle)(struct clk *);
+};
+
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL	(1 << 1)
+#define CLOCK_NO_IDLE_PARENT	(1 << 2)
+#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
+#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2		(1 << 5)
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named.  It should be "enable_count" or
+ * something similar.  "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals.  (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+	struct list_head	node;
+	const struct clkops	*ops;
+	const char		*name;
+	struct clk		*parent;
+	struct list_head	children;
+	struct list_head	sibling;	/* node for children */
+	unsigned long		rate;
+	void __iomem		*enable_reg;
+	unsigned long		(*recalc)(struct clk *);
+	int			(*set_rate)(struct clk *, unsigned long);
+	long			(*round_rate)(struct clk *, unsigned long);
+	void			(*init)(struct clk *);
+	u8			enable_bit;
+	s8			usecount;
+	u8			fixed_div;
+	u8			flags;
+	u8			rate_offset;
+	u8			src_offset;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+	struct dentry		*dent;	/* For visible tree hierarchy */
+#endif
+};
+
+struct clk_functions {
+	int		(*clk_enable)(struct clk *clk);
+	void		(*clk_disable)(struct clk *clk);
+	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
+	void		(*clk_allow_idle)(struct clk *clk);
+	void		(*clk_deny_idle)(struct clk *clk);
+	void		(*clk_disable_unused)(struct clk *clk);
+};
+
+extern int mpurate;
+
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+
+extern const struct clkops clkops_null;
+
+extern struct clk dummy_ck;
 
 int omap1_clk_init(void);
 void omap1_clk_late_init(void);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 9b45f4b0ee22..28aea55a412e 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,14 +22,13 @@
 
 #include <asm/mach-types.h>  /* for machine_is_* */
 
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/clkdev_omap.h>
-#include <plat/sram.h>	/* for omap_sram_reprogram_clock() */
+#include "soc.h"
 
 #include <mach/hardware.h>
 #include <mach/usb.h>   /* for OTG_BASE */
 
+#include "../plat-omap/sram.h"
+
 #include "iomap.h"
 #include "clock.h"
 
@@ -765,14 +764,6 @@ static struct omap_clk omap_clks[] = {
  * init
  */
 
-static struct clk_functions omap1_clk_functions = {
-	.clk_enable		= omap1_clk_enable,
-	.clk_disable		= omap1_clk_disable,
-	.clk_round_rate		= omap1_clk_round_rate,
-	.clk_set_rate		= omap1_clk_set_rate,
-	.clk_disable_unused	= omap1_clk_disable_unused,
-};
-
 static void __init omap1_show_rates(void)
 {
 	pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
@@ -803,8 +794,6 @@ int __init omap1_clk_init(void)
 	if (!cpu_is_omap15xx())
 		omap_writew(0, SOFT_REQ_REG2);
 
-	clk_init(&omap1_clk_functions);
-
 	/* By default all idlect1 clocks are allowed to idle */
 	arm_idlect1_mask = ~0;
 
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index c2552b24f9f2..ecd0bb664dad 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -26,8 +26,11 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
 #define __ARCH_ARM_MACH_OMAP1_COMMON_H
 
-#include <plat/common.h>
+#include "../plat-omap/common.h"
 #include <linux/mtd/mtd.h>
+#include <linux/i2c-omap.h>
+
+#include "../plat-omap/i2c.h"
 
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 void omap7xx_map_io(void);
@@ -38,6 +41,7 @@ static inline void omap7xx_map_io(void)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
+void omap1510_fpga_init_irq(void);
 void omap15xx_map_io(void);
 #else
 static inline void omap15xx_map_io(void)
@@ -90,4 +94,6 @@ extern int ocpi_enable(void);
 static inline int ocpi_enable(void) { return 0; }
 #endif
 
+extern u32 omap1_get_reset_sources(void);
+
 #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index d3fec92c54cb..745031870ce4 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -17,19 +17,23 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 
+#include <linux/platform_data/omap-wd-timer.h>
+
 #include <asm/mach/map.h>
 
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/mmc.h>
 
 #include <mach/omap7xx.h>
 #include <mach/camera.h>
 #include <mach/hardware.h>
 
+#include "../plat-omap/sram.h"
+
 #include "common.h"
 #include "clock.h"
+#include "dma.h"
+#include "mmc.h"
 
 #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
 
@@ -175,6 +179,13 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base,
 	res[3].name = "tx";
 	res[3].flags = IORESOURCE_DMA;
 
+	if (cpu_is_omap7xx())
+		data->slots[0].features = MMC_OMAP7XX;
+	if (cpu_is_omap15xx())
+		data->slots[0].features = MMC_OMAP15XX;
+	if (cpu_is_omap16xx())
+		data->slots[0].features = MMC_OMAP16XX;
+
 	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
 	if (ret == 0)
 		ret = platform_device_add_data(pdev, data, sizeof(*data));
@@ -439,18 +450,31 @@ static struct resource wdt_resources[] = {
 };
 
 static struct platform_device omap_wdt_device = {
-	.name	   = "omap_wdt",
-	.id	     = -1,
+	.name		= "omap_wdt",
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(wdt_resources),
 	.resource	= wdt_resources,
 };
 
 static int __init omap_init_wdt(void)
 {
+	struct omap_wd_timer_platform_data pdata;
+	int ret;
+
 	if (!cpu_is_omap16xx())
 		return -ENODEV;
 
-	return platform_device_register(&omap_wdt_device);
+	pdata.read_reset_sources = omap1_get_reset_sources;
+
+	ret = platform_device_register(&omap_wdt_device);
+	if (!ret) {
+		ret = platform_device_add_data(&omap_wdt_device, &pdata,
+					       sizeof(pdata));
+		if (ret)
+			platform_device_del(&omap_wdt_device);
+	}
+
+	return ret;
 }
 subsys_initcall(omap_init_wdt);
 #endif
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 29007fef84cd..71305c15fbd5 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -25,11 +25,13 @@
 #include <linux/device.h>
 #include <linux/io.h>
 
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
 
 #include <mach/irqs.h>
 
+#include "dma.h"
+
 #define OMAP1_DMA_BASE			(0xfffed800)
 #define OMAP1_LOGICAL_DMA_CH_COUNT	17
 #define OMAP1_DMA_STRIDE		0x40
diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h
new file mode 100644
index 000000000000..da6345dab03f
--- /dev/null
+++ b/arch/arm/mach-omap1/dma.h
@@ -0,0 +1,83 @@
+/*
+ *  OMAP1 DMA channel definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __OMAP1_DMA_CHANNEL_H
+#define __OMAP1_DMA_CHANNEL_H
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE		0
+#define OMAP_DMA_MCSI1_TX		1
+#define OMAP_DMA_MCSI1_RX		2
+#define OMAP_DMA_I2C_RX			3
+#define OMAP_DMA_I2C_TX			4
+#define OMAP_DMA_EXT_NDMA_REQ		5
+#define OMAP_DMA_EXT_NDMA_REQ2		6
+#define OMAP_DMA_UWIRE_TX		7
+#define OMAP_DMA_MCBSP1_TX		8
+#define OMAP_DMA_MCBSP1_RX		9
+#define OMAP_DMA_MCBSP3_TX		10
+#define OMAP_DMA_MCBSP3_RX		11
+#define OMAP_DMA_UART1_TX		12
+#define OMAP_DMA_UART1_RX		13
+#define OMAP_DMA_UART2_TX		14
+#define OMAP_DMA_UART2_RX		15
+#define OMAP_DMA_MCBSP2_TX		16
+#define OMAP_DMA_MCBSP2_RX		17
+#define OMAP_DMA_UART3_TX		18
+#define OMAP_DMA_UART3_RX		19
+#define OMAP_DMA_CAMERA_IF_RX		20
+#define OMAP_DMA_MMC_TX			21
+#define OMAP_DMA_MMC_RX			22
+#define OMAP_DMA_NAND			23
+#define OMAP_DMA_IRQ_LCD_LINE		24
+#define OMAP_DMA_MEMORY_STICK		25
+#define OMAP_DMA_USB_W2FC_RX0		26
+#define OMAP_DMA_USB_W2FC_RX1		27
+#define OMAP_DMA_USB_W2FC_RX2		28
+#define OMAP_DMA_USB_W2FC_TX0		29
+#define OMAP_DMA_USB_W2FC_TX1		30
+#define OMAP_DMA_USB_W2FC_TX2		31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN		32
+#define OMAP_DMA_SPI_TX			33
+#define OMAP_DMA_SPI_RX			34
+#define OMAP_DMA_CRYPTO_HASH		35
+#define OMAP_DMA_CCP_ATTN		36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
+#define OMAP_DMA_MMC2_TX		54
+#define OMAP_DMA_MMC2_RX		55
+#define OMAP_DMA_CRYPTO_DES_OUT		56
+
+#endif /* __OMAP1_DMA_CHANNEL_H */
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 73ae6169aa4a..b3fb531af94e 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -10,7 +10,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/flash.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 29ec50fc688d..d940fac9a9ed 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -27,11 +27,12 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <plat/fpga.h>
+#include <../plat-omap/fpga.h>
 
 #include <mach/hardware.h>
 
 #include "iomap.h"
+#include "common.h"
 
 static void fpga_mask_irq(struct irq_data *d)
 {
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index a0551a6d7451..32bcbb8d6c73 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -19,11 +19,25 @@
  *
  */
 
-#include <plat/i2c.h>
+#include <linux/i2c-omap.h>
 #include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
 
-void __init omap1_i2c_mux_pins(int bus_id)
+#include "../plat-omap/i2c.h"
+
+#define OMAP_I2C_SIZE		0x3f
+#define OMAP1_I2C_BASE		0xfffb3800
+#define OMAP1_INT_I2C		(32 + 4)
+
+static const char name[] = "omap_i2c";
+
+static struct resource i2c_resources[2] = {
+};
+
+static struct platform_device omap_i2c_devices[1] = {
+};
+
+static void __init omap1_i2c_mux_pins(int bus_id)
 {
 	if (cpu_is_omap7xx()) {
 		omap_cfg_reg(I2C_7XX_SDA);
@@ -33,3 +47,44 @@ void __init omap1_i2c_mux_pins(int bus_id)
 		omap_cfg_reg(I2C_SCL);
 	}
 }
+
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
+				int bus_id)
+{
+	struct platform_device *pdev;
+	struct resource *res;
+
+	omap1_i2c_mux_pins(bus_id);
+
+	pdev = &omap_i2c_devices[bus_id - 1];
+	pdev->id = bus_id;
+	pdev->name = name;
+	pdev->num_resources = ARRAY_SIZE(i2c_resources);
+	res = i2c_resources;
+	res[0].start = OMAP1_I2C_BASE;
+	res[0].end = res[0].start + OMAP_I2C_SIZE;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = OMAP1_INT_I2C;
+	res[1].flags = IORESOURCE_IRQ;
+	pdev->resource = res;
+
+	/* all OMAP1 have IP version 1 register set */
+	pdata->rev = OMAP_I2C_IP_VERSION_1;
+
+	/* all OMAP1 I2C are implemented like this */
+	pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
+		       OMAP_I2C_FLAG_SIMPLE_CLOCK |
+		       OMAP_I2C_FLAG_16BIT_DATA_REG |
+		       OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
+
+	/* how the cpu bus is wired up differs for 7xx only */
+
+	if (cpu_is_omap7xx())
+		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
+	else
+		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+
+	pdev->dev.platform_data = pdata;
+
+	return platform_device_register(pdev);
+}
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index a1b846aacdaf..52de382fc804 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 #include <asm/system_info.h>
 
-#include <plat/cpu.h>
+#include "soc.h"
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 2b36a281dc84..5c1a26c9f490 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include <linux/serial_reg.h>
 
-#include <plat/serial.h>
+#include "serial.h"
 
 		.pushsection .data
 omap_uart_phys:	.word	0x0
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index 84248d250adb..dc3237bd72d2 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -39,7 +39,7 @@
 #include <asm/sizes.h>
 #ifndef __ASSEMBLER__
 #include <asm/types.h>
-#include <plat/cpu.h>
+#include "../../mach-omap1/soc.h"
 
 /*
  * NOTE: Please use ioremap + __raw_read/write where possible instead of these
@@ -51,7 +51,7 @@ extern void omap_writeb(u8 v, u32 pa);
 extern void omap_writew(u16 v, u32 pa);
 extern void omap_writel(u32 v, u32 pa);
 
-#include <plat/tc.h>
+#include <mach/tc.h>
 
 /* Almost all documentation for chip and board memory maps assumes
  * BM is clear.  Most devel boards have a switch to control booting
@@ -72,7 +72,7 @@ static inline u32 omap_cs3_phys(void)
 
 #endif	/* ifndef __ASSEMBLER__ */
 
-#include <plat/serial.h>
+#include <mach/serial.h>
 
 /*
  * ---------------------------------------------------------------------------
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index 901082def9bd..351ae4f2c514 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -19,7 +19,7 @@
  * because of the strncmp().
  */
 #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-#include <plat/cpu.h>
+#include "../../mach-omap1/soc.h"
 
 /*
  * OMAP-1510 Local Bus address offset
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
index 8fe05d6137c0..3d235244bf5c 100644
--- a/arch/arm/mach-omap1/include/mach/omap1510.h
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -45,5 +45,118 @@
 
 #define OMAP1510_DSP_MMU_BASE	(0xfffed200)
 
+/*
+ * ---------------------------------------------------------------------------
+ *  OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE		0xE8000000		/* VA */
+#define OMAP1510_FPGA_SIZE		SZ_4K
+#define OMAP1510_FPGA_START		0x08000000		/* PA */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW			IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH			IOMEM(OMAP1510_FPGA_BASE + 0x1)
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT			IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI			IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER			IOMEM(OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET		IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST			IOMEM(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO			IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP			IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO			IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1			IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2			IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS		IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV			IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define OMAP1510P1_PPT_DATA			IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS			IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL			IOMEM(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN		IOMEM(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO			IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO		IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI		IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO		IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI		IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO		IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI		IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_EXP_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2			IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2			IOMEM(OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE		0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
+#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
+#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
+#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN		(OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK		(OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2		(OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3		(OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4		(OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5		(OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6		(OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7		(OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8		(OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9		(OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10		(OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11		(OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12		(OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER		(OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1		(OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2		(OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS		(OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17		(OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM		(OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A		(OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B		(OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD		(OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22		(OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
+
 #endif /*  __ASM_ARCH_OMAP15XX_H */
 
diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/include/mach/serial.h
new file mode 100644
index 000000000000..2ce6a2db470b
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/serial.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <linux/init.h>
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ *    uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ *    and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO_OFS	0x3ffc
+
+/* OMAP1 serial ports */
+#define OMAP1_UART1_BASE	0xfffb0000
+#define OMAP1_UART2_BASE	0xfffb0800
+#define OMAP1_UART3_BASE	0xfffb9800
+
+#define OMAP_PORT_SHIFT		2
+#define OMAP7XX_PORT_SHIFT	0
+
+#define OMAP1510_BASE_BAUD	(12000000/16)
+#define OMAP16XX_BASE_BAUD	(48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1		11
+#define OMAP1UART2		12
+#define OMAP1UART3		13
+
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/tc.h b/arch/arm/mach-omap1/include/mach/tc.h
new file mode 100644
index 000000000000..1b4b2da86203
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/tc.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/plat-omap/include/mach/tc.h
+ *
+ * OMAP Traffic Controller
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_TC_H
+#define __ASM_ARCH_TC_H
+
+#define TCMIF_BASE		0xfffecc00
+#define OMAP_TC_OCPT1_PRIOR	(TCMIF_BASE + 0x00)
+#define OMAP_TC_EMIFS_PRIOR	(TCMIF_BASE + 0x04)
+#define OMAP_TC_EMIFF_PRIOR	(TCMIF_BASE + 0x08)
+#define EMIFS_CONFIG		(TCMIF_BASE + 0x0c)
+#define EMIFS_CS0_CONFIG	(TCMIF_BASE + 0x10)
+#define EMIFS_CS1_CONFIG	(TCMIF_BASE + 0x14)
+#define EMIFS_CS2_CONFIG	(TCMIF_BASE + 0x18)
+#define EMIFS_CS3_CONFIG	(TCMIF_BASE + 0x1c)
+#define EMIFF_SDRAM_CONFIG	(TCMIF_BASE + 0x20)
+#define EMIFF_MRS		(TCMIF_BASE + 0x24)
+#define TC_TIMEOUT1		(TCMIF_BASE + 0x28)
+#define TC_TIMEOUT2		(TCMIF_BASE + 0x2c)
+#define TC_TIMEOUT3		(TCMIF_BASE + 0x30)
+#define TC_ENDIANISM		(TCMIF_BASE + 0x34)
+#define EMIFF_SDRAM_CONFIG_2	(TCMIF_BASE + 0x3c)
+#define EMIF_CFG_DYNAMIC_WS	(TCMIF_BASE + 0x40)
+#define EMIFS_ACS0		(TCMIF_BASE + 0x50)
+#define EMIFS_ACS1		(TCMIF_BASE + 0x54)
+#define EMIFS_ACS2		(TCMIF_BASE + 0x58)
+#define EMIFS_ACS3		(TCMIF_BASE + 0x5c)
+#define OMAP_TC_OCPT2_PRIOR	(TCMIF_BASE + 0xd0)
+
+/* external EMIFS chipselect regions */
+#define	OMAP_CS0_PHYS		0x00000000
+#define	OMAP_CS0_SIZE		SZ_64M
+
+#define	OMAP_CS1_PHYS		0x04000000
+#define	OMAP_CS1_SIZE		SZ_64M
+
+#define	OMAP_CS1A_PHYS		OMAP_CS1_PHYS
+#define	OMAP_CS1A_SIZE		SZ_32M
+
+#define	OMAP_CS1B_PHYS		(OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
+#define	OMAP_CS1B_SIZE		SZ_32M
+
+#define	OMAP_CS2_PHYS		0x08000000
+#define	OMAP_CS2_SIZE		SZ_64M
+
+#define	OMAP_CS2A_PHYS		OMAP_CS2_PHYS
+#define	OMAP_CS2A_SIZE		SZ_32M
+
+#define	OMAP_CS2B_PHYS		(OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
+#define	OMAP_CS2B_SIZE		SZ_32M
+
+#define	OMAP_CS3_PHYS		0x0c000000
+#define	OMAP_CS3_SIZE		SZ_64M
+
+#ifndef	__ASSEMBLER__
+
+/* EMIF Slow Interface Configuration Register */
+#define OMAP_EMIFS_CONFIG_FR		(1 << 4)
+#define OMAP_EMIFS_CONFIG_PDE		(1 << 3)
+#define OMAP_EMIFS_CONFIG_PWD_EN	(1 << 2)
+#define OMAP_EMIFS_CONFIG_BM		(1 << 1)
+#define OMAP_EMIFS_CONFIG_WP		(1 << 0)
+
+#define EMIFS_CCS(n)		(EMIFS_CS0_CONFIG + (4 * (n)))
+#define EMIFS_ACS(n)		(EMIFS_ACS0 + (4 * (n)))
+
+#endif	/* __ASSEMBLER__ */
+
+#endif	/* __ASM_ARCH_TC_H */
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
index 0ff22dc075c7..ad6fbe7d83f2 100644
--- a/arch/arm/mach-omap1/include/mach/uncompress.h
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -1,5 +1,122 @@
 /*
- * arch/arm/mach-omap1/include/mach/uncompress.h
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
  */
 
-#include <plat/uncompress.h>
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+
+#include "serial.h"
+
+#define MDR1_MODE_MASK			0x07
+
+volatile u8 *uart_base;
+int uart_shift;
+
+/*
+ * Store the DEBUG_LL uart number into memory.
+ * See also debug-macro.S, and serial.c for related code.
+ */
+static void set_omap_uart_info(unsigned char port)
+{
+	/*
+	 * Get address of some.bss variable and round it down
+	 * a la CONFIG_AUTO_ZRELADDR.
+	 */
+	u32 ram_start = (u32)&uart_shift & 0xf8000000;
+	u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+	*uart_info = port;
+}
+
+static void putc(int c)
+{
+	if (!uart_base)
+		return;
+
+	/* Check for UART 16x mode */
+	if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+		return;
+
+	while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
+		barrier();
+	uart_base[UART_TX << uart_shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id)		\
+	if (machine_is_##mach()) {					\
+		uart_base = (volatile u8 *)(dbg_uart);			\
+		uart_shift = (dbg_shft);				\
+		port = (dbg_id);					\
+		set_omap_uart_info(port);				\
+		break;							\
+	}
+
+#define DEBUG_LL_OMAP7XX(p, mach)					\
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT,	\
+		OMAP1UART##p)
+
+#define DEBUG_LL_OMAP1(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP1UART##p)
+
+static inline void arch_decomp_setup(void)
+{
+	int port = 0;
+
+	/*
+	 * Initialize the port based on the machine ID from the bootloader.
+	 * Note that we're using macros here instead of switch statement
+	 * as machine_is functions are optimized out for the boards that
+	 * are not selected.
+	 */
+	do {
+		/* omap7xx/8xx based boards using UART1 with shift 0 */
+		DEBUG_LL_OMAP7XX(1, herald);
+		DEBUG_LL_OMAP7XX(1, omap_perseus2);
+
+		/* omap15xx/16xx based boards using UART1 */
+		DEBUG_LL_OMAP1(1, ams_delta);
+		DEBUG_LL_OMAP1(1, nokia770);
+		DEBUG_LL_OMAP1(1, omap_h2);
+		DEBUG_LL_OMAP1(1, omap_h3);
+		DEBUG_LL_OMAP1(1, omap_innovator);
+		DEBUG_LL_OMAP1(1, omap_osk);
+		DEBUG_LL_OMAP1(1, omap_palmte);
+		DEBUG_LL_OMAP1(1, omap_palmz71);
+
+		/* omap15xx/16xx based boards using UART2 */
+		DEBUG_LL_OMAP1(2, omap_palmtt);
+
+		/* omap15xx/16xx based boards using UART3 */
+		DEBUG_LL_OMAP1(3, sx1);
+	} while (0);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 6a5baab1f4cb..44389d7cd255 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -17,8 +17,8 @@
 #include <asm/mach/map.h>
 
 #include <mach/mux.h>
-#include <plat/tc.h>
-#include <plat/dma.h>
+#include <mach/tc.h>
+#include <plat-omap/dma-omap.h>
 
 #include "iomap.h"
 #include "common.h"
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 6995fb6a3345..122ef67939a2 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -45,7 +45,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <plat/cpu.h>
+#include "soc.h"
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index ed42628611bc..7ed8c1857d56 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -27,11 +27,13 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 
 #include <mach/hardware.h>
 #include <mach/lcdc.h>
 
+#include "dma.h"
+
 int omap_lcd_dma_running(void)
 {
 	/*
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index bdc2e7541adb..c6d8fdf92e9c 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,14 +19,15 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 
 #include <mach/irqs.h>
 
 #include "iomap.h"
+#include "dma.h"
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h
new file mode 100644
index 000000000000..39c2b13de884
--- /dev/null
+++ b/arch/arm/mach-omap1/mmc.h
@@ -0,0 +1,18 @@
+#include <linux/mmc/host.h>
+#include <linux/platform_data/mmc-omap.h>
+
+#define OMAP15XX_NR_MMC		1
+#define OMAP16XX_NR_MMC		2
+#define OMAP1_MMC_SIZE		0x080
+#define OMAP1_MMC1_BASE		0xfffb7800
+#define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c
index 9cd4ddb51397..8dcebe6d8882 100644
--- a/arch/arm/mach-omap1/opp_data.c
+++ b/arch/arm/mach-omap1/opp_data.c
@@ -10,7 +10,7 @@
  * published by the Free Software Foundation.
  */
 
-#include <plat/clkdev_omap.h>
+#include "clock.h"
 #include "opp.h"
 
 /*-------------------------------------------------------------------------
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 47ec16155483..b2c2328d7c18 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -49,17 +49,17 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
 #include <plat/dmtimer.h>
 
 #include <mach/irqs.h>
 
+#include "../plat-omap/sram.h"
+
 #include "iomap.h"
+#include "clock.h"
 #include "pm.h"
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 7868e75ad077..3f2d39672393 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -19,8 +19,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
+#include "soc.h"
 
 #ifdef CONFIG_PM_RUNTIME
 static int omap1_pm_runtime_suspend(struct device *dev)
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
index b17709103866..5eebd7e889d0 100644
--- a/arch/arm/mach-omap1/reset.c
+++ b/arch/arm/mach-omap1/reset.c
@@ -4,12 +4,24 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <plat/prcm.h>
-
 #include <mach/hardware.h>
 
+#include "iomap.h"
 #include "common.h"
 
+/* ARM_SYSST bit shifts related to SoC reset sources */
+#define ARM_SYSST_POR_SHIFT				5
+#define ARM_SYSST_EXT_RST_SHIFT				4
+#define ARM_SYSST_ARM_WDRST_SHIFT			2
+#define ARM_SYSST_GLOB_SWRST_SHIFT			1
+
+/* Standardized reset source bits (across all OMAP SoCs) */
+#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT		0
+#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT		1
+#define OMAP_MPU_WD_RST_SRC_ID_SHIFT			3
+#define OMAP_EXTWARM_RST_SRC_ID_SHIFT			5
+
+
 void omap1_restart(char mode, const char *cmd)
 {
 	/*
@@ -23,3 +35,28 @@ void omap1_restart(char mode, const char *cmd)
 
 	omap_writew(1, ARM_RSTCT1);
 }
+
+/**
+ * omap1_get_reset_sources - return the source of the SoC's last reset
+ *
+ * Returns bits that represent the last reset source for the SoC.  The
+ * format is standardized across OMAPs for use by the OMAP watchdog.
+ */
+u32 omap1_get_reset_sources(void)
+{
+	u32 ret = 0;
+	u16 rs;
+
+	rs = __raw_readw(OMAP1_IO_ADDRESS(ARM_SYSST));
+
+	if (rs & (1 << ARM_SYSST_POR_SHIFT))
+		ret |= 1 << OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT;
+	if (rs & (1 << ARM_SYSST_EXT_RST_SHIFT))
+		ret |= 1 << OMAP_EXTWARM_RST_SRC_ID_SHIFT;
+	if (rs & (1 << ARM_SYSST_ARM_WDRST_SHIFT))
+		ret |= 1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT;
+	if (rs & (1 << ARM_SYSST_GLOB_SWRST_SHIFT))
+		ret |= 1 << OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT;
+
+	return ret;
+}
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index b9d6834af835..d1ac08016f0b 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -23,7 +23,6 @@
 #include <asm/mach-types.h>
 
 #include <mach/mux.h>
-#include <plat/fpga.h>
 
 #include "pm.h"
 
diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h
new file mode 100644
index 000000000000..6cf9c1cc2bef
--- /dev/null
+++ b/arch/arm/mach-omap1/soc.h
@@ -0,0 +1,229 @@
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+
+/*
+ * omap_rev bits:
+ * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
+ * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
+ */
+unsigned int omap_rev(void);
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():	True for OMAP730, OMAP850
+ * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
+ */
+#define GET_OMAP_CLASS	(omap_rev() & 0xff)
+
+#define IS_OMAP_CLASS(class, id)			\
+static inline int is_omap ##class (void)		\
+{							\
+	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
+}
+
+#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id)			\
+static inline int is_omap ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+
+#define cpu_is_omap7xx()		0
+#define cpu_is_omap15xx()		0
+#define cpu_is_omap16xx()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap310():	True for OMAP310
+ * cpu_is_omap1510():	True for OMAP1510
+ * cpu_is_omap1610():	True for OMAP1610
+ * cpu_is_omap1611():	True for OMAP1611
+ * cpu_is_omap5912():	True for OMAP5912
+ * cpu_is_omap1621():	True for OMAP1621
+ * cpu_is_omap1710():	True for OMAP1710
+ */
+#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id)				\
+static inline int is_omap ##type (void)			\
+{							\
+	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+
+#define cpu_is_omap310()		0
+#define cpu_is_omap1510()		0
+#define cpu_is_omap1610()		0
+#define cpu_is_omap5912()		0
+#define cpu_is_omap1611()		0
+#define cpu_is_omap1621()		0
+#define cpu_is_omap1710()		0
+
+/* These are needed to compile common code */
+#ifdef CONFIG_ARCH_OMAP1
+#define cpu_is_omap242x()		0
+#define cpu_is_omap2430()		0
+#define cpu_is_omap243x()		0
+#define cpu_is_omap24xx()		0
+#define cpu_is_omap34xx()		0
+#define cpu_is_omap44xx()		0
+#define soc_is_omap54xx()		0
+#define soc_is_am33xx()			0
+#define cpu_class_is_omap1()		1
+#define cpu_class_is_omap2()		0
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 310 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()		is_omap310()
+# define cpu_is_omap1510()		is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
+# define cpu_is_omap1610()		is_omap1610()
+# define cpu_is_omap1611()		is_omap1611()
+# define cpu_is_omap5912()		is_omap5912()
+# define cpu_is_omap1621()		is_omap1621()
+# define cpu_is_omap1710()		is_omap1710()
+#endif
+
+#endif	/* __ASSEMBLY__ */
+#endif