diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2020-07-20 15:55:24 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-07-21 13:42:37 +0200 |
| commit | 15d157e874437e381643c37a10922388d6e55b29 (patch) | |
| tree | 6758f45e64bcc9fb427f73655e2407b4fe16ebfa /arch/arm/mach-omap1 | |
| parent | 233418634345b414595dc12afd07021169fc6d8e (diff) | |
| download | linux-15d157e874437e381643c37a10922388d6e55b29.tar.bz2 | |
usb: ohci-omap: Convert to use GPIO descriptors
The OMAP1 OHCI driver is using the legacy GPIO API to grab some
random GPIO lines. One is from the TPS65010 chip and used for
power, another one is for overcurrent and while the driver picks
this line it doesn't watch it at all.
Convert the driver and the OMAP1 OSK board file to pass these
two GPIOs as machine described GPIO descriptors.
I noticed the overcurrent GPIO line is not really used in the
code so dropped in a little comment for other developers.
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200720135524.100374-2-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'arch/arm/mach-omap1')
| -rw-r--r-- | arch/arm/mach-omap1/board-osk.c | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 4df15e693b6e..144b9caa935c 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -26,6 +26,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -55,6 +56,9 @@ #include "common.h" +/* Name of the GPIO chip used by the OMAP for GPIOs 0..15 */ +#define OMAP_GPIO_LABEL "gpio-0-15" + /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ #define OMAP_OSK_ETHR_START 0x04800300 @@ -240,7 +244,9 @@ static struct tps65010_board tps_board = { static struct i2c_board_info __initdata osk_i2c_board_info[] = { { + /* This device will get the name "i2c-tps65010" */ I2C_BOARD_INFO("tps65010", 0x48), + .dev_name = "tps65010", .platform_data = &tps_board, }, @@ -278,6 +284,16 @@ static void __init osk_init_cf(void) irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); } +static struct gpiod_lookup_table osk_usb_gpio_table = { + .dev_id = "ohci", + .table = { + /* Power GPIO on the I2C-attached TPS65010 */ + GPIO_LOOKUP("i2c-tps65010", 1, "power", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP(OMAP_GPIO_LABEL, 9, "overcurrent", + GPIO_ACTIVE_HIGH), + }, +}; + static struct omap_usb_config osk_usb_config __initdata = { /* has usb host connector (A) ... for development it can also * be used, with a NONSTANDARD gender-bending cable/dongle, as @@ -581,6 +597,7 @@ static void __init osk_init(void) l |= (3 << 1); omap_writel(l, USB_TRANSCEIVER_CTRL); + gpiod_add_lookup_table(&osk_usb_gpio_table); omap1_usb_init(&osk_usb_config); /* irq for tps65010 chip */ |