Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This merge window brings a good size of cleanups on various platforms.
  Among the bigger ones:

   - Removal of Samsung s5pc100 and s5p64xx platforms.  Both of these
     have lacked active support for quite a while, and after asking
     around nobody showed interest in keeping them around.  If needed,
     they could be resurrected in the future but it's more likely that
     we would prefer reintroduction of them as DT and
     multiplatform-enabled platforms instead.

   - OMAP4 controller code register define diet.  They defined a lot of
     registers that were never actually used, etc.

   - Move of some of the Tegra platform code (PMC, APBIO, fuse,
     powergate) to drivers/soc so it can be shared with 64-bit code.
     This also converts them over to traditional driver models where
     possible.

   - Removal of legacy gpio-samsung driver, since the last users have
     been removed (moved to pinctrl)

  Plus a bunch of smaller changes for various platforms that sort of
  dissapear in the diffstat for the above.  clps711x cleanups, shmobile
  header file refactoring/moves for multiplatform friendliness, some
  misc cleanups, etc"

* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
  drivers: CCI: Correct use of ! and &
  video: clcd-versatile: Depend on ARM
  video: fix up versatile CLCD helper move
  MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
  MAINTAINERS: Remove Kirkwood
  ARM: tegra: Convert PMC to a driver
  soc/tegra: fuse: Set up in early initcall
  ARM: tegra: Always lock the CPU reset vector
  ARM: tegra: Setup CPU hotplug in a pure initcall
  soc/tegra: Implement runtime check for Tegra SoCs
  soc/tegra: fuse: fix dummy functions
  soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
  soc/tegra: Add efuse and apbmisc bindings
  soc/tegra: Add efuse driver for Tegra
  ARM: tegra: move fuse exports to soc/tegra/fuse.h
  ARM: tegra: export apb dma readl/writel
  ARM: tegra: Use a function to get the chip ID
  ARM: tegra: Sort includes alphabetically
  ARM: tegra: Move includes to include/soc/tegra
  ...

10 files changed, 14 insertions, 66 deletions

diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index d62ca16d5394..45abf6bd5f68 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -266,7 +266,6 @@ MACHINE_START(AUTCPU12, "autronix autcpu12")
 	/* Maintainer: Thomas Gleixner */
 	.atag_offset	= 0x20000,
 	.map_io		= clps711x_map_io,
-	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= autcpu12_init,
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
index e261a47f2aff..1ec378c334e5 100644
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ b/arch/arm/mach-clps711x/board-cdb89712.c
@@ -140,7 +140,6 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
 	/* Maintainer: Ray Lehtiniemi */
 	.atag_offset	= 0x100,
 	.map_io		= clps711x_map_io,
-	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= cdb89712_init,
diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c
index 94a7add88a3f..f9ca22b646bf 100644
--- a/arch/arm/mach-clps711x/board-clep7312.c
+++ b/arch/arm/mach-clps711x/board-clep7312.c
@@ -25,6 +25,7 @@
 #include <asm/mach/arch.h>
 
 #include "common.h"
+#include "devices.h"
 
 static void __init
 fixup_clep7312(struct tag *tags, char **cmdline)
@@ -37,8 +38,8 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
 	.atag_offset	= 0x0100,
 	.fixup		= fixup_clep7312,
 	.map_io		= clps711x_map_io,
-	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
+	.init_machine	= clps711x_devices_init,
 	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index 6144fb5cdc36..fdf54d40909a 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -148,11 +148,6 @@ fixup_edb7211(struct tag *tags, char **cmdline)
 	memblock_add(0xc1000000, SZ_8M);
 }
 
-static void __init edb7211_init(void)
-{
-	clps711x_devices_init();
-}
-
 static void __init edb7211_init_late(void)
 {
 	gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
@@ -178,10 +173,9 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.fixup		= fixup_edb7211,
 	.reserve	= edb7211_reserve,
 	.map_io		= clps711x_map_io,
-	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
-	.init_machine	= edb7211_init,
+	.init_machine	= clps711x_devices_init,
 	.init_late	= edb7211_init_late,
 	.restart	= clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index 96bcc76c4437..e68dd629bda2 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -365,7 +365,6 @@ MACHINE_START(P720T, "ARM-Prospector720T")
 	.atag_offset	= 0x100,
 	.fixup		= fixup_p720t,
 	.map_io		= clps711x_map_io,
-	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= p720t_init,
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index aee81fa46ccf..2a6323b15782 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -193,15 +193,3 @@ void clps711x_restart(enum reboot_mode mode, const char *cmd)
 {
 	soft_restart(0);
 }
-
-static void clps711x_idle(void)
-{
-	clps_writel(1, HALT);
-	asm("mov r0, r0");
-	asm("mov r0, r0");
-}
-
-void __init clps711x_init_early(void)
-{
-	arm_pm_idle = clps711x_idle;
-}
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
index 7489139d5d63..f88189963898 100644
--- a/arch/arm/mach-clps711x/common.h
+++ b/arch/arm/mach-clps711x/common.h
@@ -13,7 +13,6 @@ extern void clps711x_map_io(void);
 extern void clps711x_init_irq(void);
 extern void clps711x_timer_init(void);
 extern void clps711x_restart(enum reboot_mode mode, const char *cmd);
-extern void clps711x_init_early(void);
 
 /* drivers/irqchip/irq-clps711x.c */
 void clps711x_intc_init(phys_addr_t, resource_size_t);
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
index 2001488a5ef2..0c689d3a6710 100644
--- a/arch/arm/mach-clps711x/devices.c
+++ b/arch/arm/mach-clps711x/devices.c
@@ -14,6 +14,15 @@
 
 #include <mach/hardware.h>
 
+static const struct resource clps711x_cpuidle_res __initconst =
+	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + HALT, SZ_128);
+
+static void __init clps711x_add_cpuidle(void)
+{
+	platform_device_register_simple("clps711x-cpuidle", PLATFORM_DEVID_NONE,
+					&clps711x_cpuidle_res, 1);
+}
+
 static const phys_addr_t clps711x_gpios[][2] __initconst = {
 	{ PADR, PADDR },
 	{ PBDR, PBDDR },
@@ -83,6 +92,7 @@ static void __init clps711x_add_uart(void)
 
 void __init clps711x_devices_init(void)
 {
+	clps711x_add_cpuidle();
 	clps711x_add_gpio();
 	clps711x_add_syscon();
 	clps711x_add_uart();
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
deleted file mode 100644
index cb3684f8dae0..000000000000
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-clps711x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <mach/hardware.h>
-
-		.macro	addruart, rp, rv, tmp
-#ifndef CONFIG_DEBUG_CLPS711X_UART2
-		mov	\rp, #0x0000	@ UART1
-#else
-		mov	\rp, #0x1000	@ UART2
-#endif
-		orr	\rv, \rp, #CLPS711X_VIRT_BASE
-		orr	\rp, \rp, #CLPS711X_PHYS_BASE
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0480]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 11		@ UBUSYx
-		bne	1001b
-		.endm
-
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index 5d6afda1c0e8..833129c9f798 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -24,10 +24,7 @@
 
 #include <mach/clps711x.h>
 
-#define IO_ADDRESS(x)		(0xdc000000 + (((x) & 0x03ffffff) | \
-				(((x) >> 2) & 0x3c000000)))
-
-#define CLPS711X_VIRT_BASE	IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE))
+#define CLPS711X_VIRT_BASE	IOMEM(0xfeff0000)
 
 #ifndef __ASSEMBLY__
 #define clps_readb(off)		readb(CLPS711X_VIRT_BASE + (off))