diff options
author | Olof Johansson <olof@lixom.net> | 2017-06-18 20:15:54 -0700 |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2017-06-18 20:15:54 -0700 |
commit | 2a65ec81b750d24e1310546852c5166d622609b2 (patch) | |
tree | 1338739a2ee6f7272406ed8d7f43b07593fbcf36 /arch/arm/boot | |
parent | 1830893b427262e12c923364b987f5b3f8ccda9d (diff) | |
parent | 4a579ecf3d4f964bd6b39605610201cd4d5a7e8e (diff) | |
download | linux-2a65ec81b750d24e1310546852c5166d622609b2.tar.bz2 |
Merge tag 'arm-soc/for-4.13/devicetree' of http://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM-based Device Tree changes for 4.13.
Note that Baruch's changes are fixes that are currently included in v4.12-rc2,
but they are also included here in order to keep this tag based off v4.12-rc1.
Please pull the following:
- Rafal adds CPU and thermal zones to the Northstar (BCM5301X) Device Tree and he
also adds the MDIO controller nodes for later use by USB PHYs
- Eric adds support for the V3D engine and Ethernet switch on the Cygnus
platforms, he also adds a set of Device Tree sources and include files for the
Raspberry Pi 3 (BCM2837) to be used with the ARM/Linux kernel,
- Jon adds CPU and thermal zones to the Northstar Plus Device Tree files
- Stefan updates the Raspberry Pi DTS files with thermal trip points and zones,
adds support for the USB OTG on the Raspberry Pi Zero which includes the
proper dwc2 configuration, a generic USB PHY and finally the enabling of the
OTG controller by including the proper DTS include file
- Gerd switches the Raspberry Pi DTS files to use the SDHOST controller (faster
than the SDHCI)
* tag 'arm-soc/for-4.13/devicetree' of http://github.com/Broadcom/stblinux:
ARM: dts: bcm2835-rpi-zero: Enable OTG mode
ARM: dts: bcm283x: Add generic USB PHY
ARM: dts: bcm283x: Add dtsi for OTG mode
ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY
ARM: dts: NSP: Add Thermal Support
ARM: dts: Cygnus: Add BCM11360's V3D device
ARM: dts: BCM5301X: Specify MDIO bus in the DT
ARM: dts: BCM5301X: Add CPU thermal sensor and zone
ARM: dts: bcm283x: switch from &sdhci to &sdhost
ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch/arm/boot')
-rw-r--r-- | arch/arm/boot/dts/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm-cygnus.dtsi | 71 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm-nsp.dtsi | 26 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm2835-rpi-zero.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm2835.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm2836.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi | 10 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm283x.dtsi | 27 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm5301x.dtsi | 34 | ||||
-rw-r--r-- | arch/arm/boot/dts/bcm911360_entphn.dts | 20 |
12 files changed, 200 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c3ae2e1fd9f4..f873fa156c2e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b-plus.dtb \ bcm2835-rpi-a-plus.dtb \ bcm2836-rpi-2-b.dtb \ + bcm2837-rpi-3-b.dtb \ bcm2835-rpi-zero.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 9644fddb5e3c..bf8c83815753 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -142,6 +142,55 @@ interrupts = <0>; }; + mdio: mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #size-cells = <1>; + #address-cells = <0>; + status = "disabled"; + + gphy0: ethernet-phy@0 { + reg = <0>; + }; + + gphy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + switch: switch@18007000 { + compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab"; + reg = <0x18007000 0x1000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-handle = <&gphy0>; + phy-mode = "rgmii"; + }; + + port@1 { + reg = <1>; + phy-handle = <&gphy1>; + phy-mode = "rgmii"; + }; + + port@8 { + reg = <8>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + i2c0: i2c@18008000 { compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; reg = <0x18008000 0x100>; @@ -295,6 +344,15 @@ status = "disabled"; }; + eth0: ethernet@18042000 { + compatible = "brcm,amac"; + reg = <0x18042000 0x1000>, + <0x18110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + nand: nand@18046000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x18046000 0x600>, <0xf8105408 0x600>, @@ -386,6 +444,19 @@ status = "disabled"; }; + v3d: v3d@180a2000 { + compatible = "brcm,cygnus-v3d"; + reg = <0x180a2000 0x1000>; + clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; + clock-names = "v3d_clk"; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vc4: gpu { + compatible = "brcm,cygnus-vc4"; + }; + adc: adc@180a6000 { compatible = "brcm,iproc-static-adc"; #io-channel-cells = <1>; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index fe6cba994a97..7204d1def23d 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -413,6 +413,12 @@ <0x3f408 0x04>; }; + thermal: thermal@3f2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x3f2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + sata_phy: sata_phy@40100 { compatible = "brcm,iproc-nsp-sata-phy"; reg = <0x40100 0x340>; @@ -563,4 +569,24 @@ brcm,pcie-msi-inten; }; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index cc8b832c4c78..79a20d520931 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -12,7 +12,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" -#include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-usb-otg.dtsi" / { compatible = "raspberrypi,model-zero", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index a7b5ce133784..e55b362b9d6e 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -65,13 +65,13 @@ &sdhci { pinctrl-names = "default"; pinctrl-0 = <&emmc_gpio48>; - status = "okay"; bus-width = <4>; }; &sdhost { pinctrl-names = "default"; pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; bus-width = <4>; }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 0890d97e674d..659b6e9513b1 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -24,6 +24,10 @@ }; }; +&cpu_thermal { + coefficients = <(-538) 407000>; +}; + /* enable thermal sensor with the correct compatible property set */ &thermal { compatible = "brcm,bcm2835-thermal"; diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi index 519a44f5d25a..da3deeb42592 100644 --- a/arch/arm/boot/dts/bcm2836.dtsi +++ b/arch/arm/boot/dts/bcm2836.dtsi @@ -77,6 +77,10 @@ interrupts = <8>; }; +&cpu_thermal { + coefficients = <(-538) 407000>; +}; + /* enable thermal sensor with the correct compatible property set */ &thermal { compatible = "brcm,bcm2836-thermal"; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts new file mode 100644 index 000000000000..c72a27d908b6 --- /dev/null +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -0,0 +1 @@ +#include "arm64/broadcom/bcm2837-rpi-3-b.dts" diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi new file mode 100644 index 000000000000..e7d217c967a1 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi @@ -0,0 +1,10 @@ +&usb { + dr_mode = "otg"; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + /* + * According to dwc2 the sum of all device EP + * fifo sizes shouldn't exceed 3776 bytes. + */ + g-tx-fifo-size = <256 256 512 512 512 768 768>; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 561f27d8d922..9a05cde8aced 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -19,6 +19,26 @@ bootargs = "earlyprintk console=ttyAMA0"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <80000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -430,6 +450,7 @@ compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; clocks = <&clocks BCM2835_CLOCK_TSENS>; + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -568,6 +589,8 @@ #size-cells = <0>; clocks = <&clk_usb>; clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; }; v3d: v3d@7ec00000 { @@ -603,4 +626,8 @@ clock-frequency = <480000000>; }; }; + + usbphy: phy { + compatible = "usb-nop-xceiv"; + }; }; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index acee36a61004..98647d22b291 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -320,6 +320,14 @@ }; }; + mdio: mdio@18003000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18003000 0x8>; + #size-cells = <1>; + #address-cells = <0>; + status = "disabled"; + }; + i2c0: i2c@18009000 { compatible = "brcm,iproc-i2c"; reg = <0x18009000 0x50>; @@ -349,6 +357,12 @@ "sata2"; }; + thermal: thermal@1800c2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x1800c2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + srab: srab@18007000 { compatible = "brcm,bcm5301x-srab"; reg = <0x18007000 0x1000>; @@ -412,4 +426,24 @@ status = "disabled"; }; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index 8b3800f46288..000f5f19215e 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -57,6 +57,26 @@ }; }; +ð0 { + status = "okay"; +}; + +&mdio { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + +&v3d { + assigned-clocks = + <&mipipll BCM_CYGNUS_MIPIPLL>, + <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; + assigned-clock-rates = <525000000>, <300000000>; + status = "okay"; +}; + &uart3 { status = "okay"; }; |