Merge tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux into nextnext

Pull clock framework updates from Mike Turquette:
 "The clock framework changes for 3.16 are pretty typical: mostly clock
  driver additions and fixes.  There are additions to the clock core
  code for some of the basic types (e.g. the common divider type has
  some fixes and featured added to it).

  One minor annoyance is a last-minute dependency that wasn't handled
  quite right.  Commit ba0fae3b06a6 ("clk: berlin: add core clock driver
  for BG2/BG2CD") in this pull request depends on
  include/dt-bindings/clock/berlin2.h, which is already in your tree via
  the arm-soc pull request.  Building for the berlin platform will break
  when the clk tree is built on it's own, but merged into your master
  branch everything should be fine"

* tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux: (75 commits)
  mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
  clk: export __clk_round_rate for providers
  clk: versatile: free icst on error return
  clk: qcom: Return error pointers for unimplemented clocks
  clk: qcom: Support msm8974pro global clock control hardware
  clk: qcom: Properly support display clocks on msm8974
  clk: qcom: Support display RCG clocks
  clk: qcom: Return highest rate when round_rate() exceeds plan
  clk: qcom: Fix mmcc-8974's PLL configurations
  clk: qcom: Fix clk_rcg2_is_enabled() check
  clk: berlin: add core clock driver for BG2Q
  clk: berlin: add core clock driver for BG2/BG2CD
  clk: berlin: add driver for BG2x complex divider cells
  clk: berlin: add driver for BG2x simple PLLs
  clk: berlin: add driver for BG2x audio/video PLL
  clk: st: Terminate of match table
  clk/exynos4: Fix compilation warning
  ARM: shmobile: r8a7779: Add clock index macros for DT sources
  clk: divider: Fix overflow in clk_divider_bestdiv
  clk: u300: Terminate of match table
  ...

1 files changed, 105 insertions, 59 deletions

diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 08a44d41b672..8b366822bb43 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -14,6 +14,8 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
+#include "dt-bindings/clock/bcm21664.h"
+
 #include "skeleton.dtsi"
 
 / {
@@ -43,7 +45,7 @@
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e000000 0x118>;
-		clocks = <&uartb_clk>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -53,7 +55,7 @@
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e001000 0x118>;
-		clocks = <&uartb2_clk>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -63,7 +65,7 @@
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e002000 0x118>;
-		clocks = <&uartb3_clk>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -85,7 +87,7 @@
 		compatible = "brcm,kona-timer";
 		reg = <0x35006000 0x1c>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&hub_timer_clk>;
+		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
 	};
 
 	gpio: gpio@35003000 {
@@ -106,7 +108,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f180000 0x801c>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sdio1_clk>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
 		status = "disabled";
 	};
 
@@ -114,7 +116,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f190000 0x801c>;
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sdio2_clk>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
 		status = "disabled";
 	};
 
@@ -122,7 +124,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1a0000 0x801c>;
 		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sdio3_clk>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
 		status = "disabled";
 	};
 
@@ -130,7 +132,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1b0000 0x801c>;
 		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sdio4_clk>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
 		status = "disabled";
 	};
 
@@ -140,7 +142,7 @@
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&bsc1_clk>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
 		status = "disabled";
 	};
 
@@ -150,7 +152,7 @@
 		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&bsc2_clk>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
 		status = "disabled";
 	};
 
@@ -160,7 +162,7 @@
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&bsc3_clk>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
 		status = "disabled";
 	};
 
@@ -170,105 +172,149 @@
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&bsc4_clk>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
 		status = "disabled";
 	};
 
 	clocks {
-		bsc1_clk: bsc1 {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-			#clock-cells = <0>;
-		};
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
 
-		bsc2_clk: bsc2 {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
 		};
 
-		bsc3_clk: bsc3 {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+		bbl_32k_clk: bbl_32k {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
 		};
 
-		bsc4_clk: bsc4 {
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <13000000>;
-			#clock-cells = <0>;
 		};
 
-		pmu_bsc_clk: pmu_bsc {
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <13000000>;
-			#clock-cells = <0>;
 		};
 
-		hub_timer_clk: hub_timer {
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+		dft_19_5m_clk: dft_19_5m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
 		};
 
-		pwm_clk: pwm {
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <26000000>;
-			#clock-cells = <0>;
 		};
 
-		sdio1_clk: sdio1 {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
+		ref_52m_clk: ref_52m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
 		};
 
-		sdio2_clk: sdio2 {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
+		var_52m_clk: var_52m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
 		};
 
-		sdio3_clk: sdio3 {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
+		usb_otg_ahb_clk: usb_otg_ahb {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
 		};
 
-		sdio4_clk: sdio4 {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
+		ref_96m_clk: ref_96m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
 		};
 
-		tmon_1m_clk: tmon_1m {
-			compatible = "fixed-clock";
-			clock-frequency = <1000000>;
+		var_96m_clk: var_96m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
 		};
 
-		uartb_clk: uartb {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+		ref_104m_clk: ref_104m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
 		};
 
-		uartb2_clk: uartb2 {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+		var_104m_clk: var_104m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
 		};
 
-		uartb3_clk: uartb3 {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
+		ref_156m_clk: ref_156m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
 		};
 
-		usb_otg_ahb_clk: usb_otg_ahb {
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
+		var_156m_clk: var_156m {
 			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu {
+			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu {
+			compatible = BCM21664_DT_AON_CCU_COMPAT;
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		master_ccu: master_ccu {
+			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+
+		slave_ccu: slave_ccu {
+			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
 		};
 	};